view criteria - Page 447

Pages in IE render differently when served through the ASP.NET Development server and Production Ser

- by rajbk

You see differences in the way IE renders your web application locally on the ASP.NET Development server compared to your production server. Comparing the response from both servers including response headers and CSS show no difference. The issue may occur because of a setting in IE. In IE, go to Tools –> Compatibility ViewSettings. The checkbox “Display intranet sites in Compatibility View” turned on forces IE8 to display the web application content in a way similar to how Internet Explorer 7 handles standards mode web pages. Since your local web server is considered to be in the intranet zone, IE uses “Compatibility View” to render your pages. While you could uncheck this setting in or propagate the change to all developers through group policy settings, a different way is described below. To force IE to mimic the behavior of a certain version of IE when rendering the pages, you use the meta element to include a “X-UA-Compatible” http-equiv header in your web page or have it sent as part of the header by adding it to your web.config file. The values are listed below: <meta http-equiv="X-UA-Compatible" content="IE=4">  <meta http-equiv="X-UA-Compatible" content="IE=7.5">  <meta http-equiv="X-UA-Compatible" content="IE=100">  <meta http-equiv="X-UA-Compatible" content="IE=a">  This value can also be set in web.config like so: <?xml version="1.0" encoding="utf-8"?> <configuration> <system.webServer> <httpProtocol> <customHeaders> <clear /> <add name="X-UA-Compatible" value="IE=EmulateIE7" /> </customHeaders> </httpProtocol> </system.webServer> </configuration> The setting can added in the IIS metabase as described here. Similarly, you can do the same in Apache by adding the directive in httpd.conf <Location /store> Header set X-UA-Compatible “IE=EmulateIE7” </Location> Even though it can be done on a site level, I recommend you do it on a per application level to avoid confusing the developer. References Defining Document Compatibility Implementing the META Switch on IIS Implementing the META Switch on Apache

Read the article

Windows Phone 7 Silverlight / XNA development talk

- by subodhnpushpak

Hi, I presented on Windows Phone 7 app development using Silverlight. Here are few pics from the event Windows Phone 7 development VIEW SLIDE SHOW DOWNLOAD ALL I demonstrated the Visual studio, emulator capabilities/ features. An demo on Wp7 app communication with an OData Service, along with a demo on XNA app. There was lot of curious questions; I am listing them here because these keep on popping up again and again: 1. What tools does it takes to develop Wp7 app? Are they free? A typical WP7 app can be developed either using Silverlight or XNA. For developers, Visual Studio 2010 is a good choice as it provides an integrated development environment with lots of useful project templates; which makes the task really easy. For designers, Blend may be used to develop the UI in XAML. Both the tools are FREE (express version) to download and very intuitive to use. 2. What about the learning curve? If you know C#, (or any other programming language), learning curve is really flat. XAML (used for UI) may be new for you, but trust me; its very intuitive. Also you can use Microsoft Blend to generate the UI (XAML) for you. 3. How can I develop /test app without using actual device? How can I be sure my app runs as expected on actual device? The WP7 SDK comes along with an excellent emulator; which you can use for development/ testing on a computer. Later you can just change a setting and deploy the application on WP7. You will require Zune software for deploying the application on phone along with Developers key from WP7 marketplace. You can obtain key from marketplace by filling a form. The whole process for registering is easy; just follow the steps on the site. 4. Which one should I use? Silverlight or XNA? Use Silverlight for enterprise/ business / utility apps. Use XNA for Games app. While each platform is capable / strong and may be used in conjunction as well; The methodologies used for development in these platforms are very different. XNA works on typical Do..While loop where as Silverlight works on event based methodology. 5. Where are the learning resources? Are they free? There is lots of stuff on WP7. Most of them are free. There is a excellent free book by Charles Petzold to download and http://www.microsoft.com/windowsphone is full of demos /todos / vidoes. All the exciting stuff was captured live and you can view it here; in case you were not able to catch it live!! @ http://livestre.am/AUfx. My talk starts from 3:19:00 timeline in the video!! Is there an app you miss on WP7? Do let me know about it and I may work on it for free !!! Keep discovering. Keep is Simple. WP7. Subodh

Read the article

Indexing data from multiple tables with Oracle Text

- by Roger Ford

It's well known that Oracle Text indexes perform best when all the data to be indexed is combined into a single index. The query select * from mytable where contains (title, 'dog') 0 or contains (body, 'cat') 0 will tend to perform much worse than select * from mytable where contains (text, 'dog WITHIN title OR cat WITHIN body') 0 For this reason, Oracle Text provides the MULTI_COLUMN_DATASTORE which will combine data from multiple columns into a single index. Effectively, it constructs a "virtual document" at indexing time, which might look something like: <title>the big dog</title> <body>the ginger cat smiles</body> This virtual document can be indexed using either AUTO_SECTION_GROUP, or by explicitly defining sections for title and body, allowing the query as expressed above. Note that we've used a column called "text" - this might have been a dummy column added to the table simply to allow us to create an index on it - or we could created the index on either of the "real" columns - title or body. It should be noted that MULTI_COLUMN_DATASTORE doesn't automatically handle updates to columns used by it - if you create the index on the column text, but specify that columns title and body are to be indexed, you will need to arrange triggers such that the text column is updated whenever title or body are altered. That works fine for single tables. But what if we actually want to combine data from multiple tables? In that case there are two approaches which work well: Create a real table which contains a summary of the information, and create the index on that using the MULTI_COLUMN_DATASTORE. This is simple, and effective, but it does use a lot of disk space as the information to be indexed has to be duplicated. Create our own "virtual" documents using the USER_DATASTORE. The user datastore allows us to specify a PL/SQL procedure which will be used to fetch the data to be indexed, returned in a CLOB, or occasionally in a BLOB or VARCHAR2. This PL/SQL procedure is called once for each row in the table to be indexed, and is passed the ROWID value of the current row being indexed. The actual contents of the procedure is entirely up to the owner, but it is normal to fetch data from one or more columns from database tables. In both cases, we still need to take care of updates - making sure that we have all the triggers necessary to update the indexed column (and, in case 1, the summary table) whenever any of the data to be indexed gets changed. I've written full examples of both these techniques, as SQL scripts to be run in the SQL*Plus tool. You will need to run them as a user who has CTXAPP role and CREATE DIRECTORY privilege. Part of the data to be indexed is a Microsoft Word file called "1.doc". You should create this file in Word, preferably containing the single line of text: "test document". This file can be saved anywhere, but the SQL scripts need to be changed so that the "create or replace directory" command refers to the right location. In the example, I've used C:\doc. multi_table_indexing_1.sql : creates a summary table containing all the data, and uses multi_column_datastore Download link / View in browser multi_table_indexing_2.sql : creates "virtual" documents using a procedure as a user_datastore Download link / View in browser

Read the article

How can I draw an arrow at the edge of the screen pointing to an object that is off screen?

- by Adam Henderson

I am wishing to do what is described in this topic: http://www.allegro.cc/forums/print-thread/283220 I have attempted a variety of the methods mentioned here. First I tried to use the method described by Carrus85: Just take the ratio of the two triangle hypontenuses (doesn't matter which triagle you use for the other, I suggest point 1 and point 2 as the distance you calculate). This will give you the aspect ratio percentage of the triangle in the corner from the larger triangle. Then you simply multiply deltax by that value to get the x-coordinate offset, and deltay by that value to get the y-coordinate offset. But I could not find a way to calculate how far the object is away from the edge of the screen. I then tried using ray casting (which I have never done before) suggested by 23yrold3yrold: Fire a ray from the center of the screen to the offscreen object. Calculate where on the rectangle the ray intersects. There's your coordinates. I first calculated the hypotenuse of the triangle formed by the difference in x and y positions of the two points. I used this to create a unit vector along that line. I looped through that vector until either the x coordinate or the y coordinate was off the screen. The two current x and y values then form the x and y of the arrow. Here is the code for my ray casting method (written in C++ and Allegro 5) void renderArrows(Object* i) { float x1 = i->getX() + (i->getWidth() / 2); float y1 = i->getY() + (i->getHeight() / 2); float x2 = screenCentreX; float y2 = ScreenCentreY; float dx = x2 - x1; float dy = y2 - y1; float hypotSquared = (dx * dx) + (dy * dy); float hypot = sqrt(hypotSquared); float unitX = dx / hypot; float unitY = dy / hypot; float rayX = x2 - view->getViewportX(); float rayY = y2 - view->getViewportY(); float arrowX = 0; float arrowY = 0; bool posFound = false; while(posFound == false) { rayX += unitX; rayY += unitY; if(rayX <= 0 || rayX >= screenWidth || rayY <= 0 || rayY >= screenHeight) { arrowX = rayX; arrowY = rayY; posFound = true; } } al_draw_bitmap(sprite, arrowX - spriteWidth, arrowY - spriteHeight, 0); } This was relatively successful. Arrows are displayed in the bottom right section of the screen when objects are located above and left of the screen as if the locations of the where the arrows are drawn have been rotated 180 degrees around the center of the screen. I assumed this was due to the fact that when I was calculating the hypotenuse of the triangle, it would always be positive regardless of whether or not the difference in x or difference in y is negative. Thinking about it, ray casting does not seem like a good way of solving the problem (due to the fact that it involves using sqrt() and a large for loop). Any help finding a suitable solution would be greatly appreciated, Thanks Adam

Read the article

Essential Links for the SharePoint Client Side Developer

- by Mark Rackley

Front End Developer? Client Side Developer? Middle Tier??? I’m covering all my bases. Regardless, I’m sick and tired of Googling with Bing when I forget where information that I need often is located. I was getting ready to bookmark some of them when it hit me… “Hey Mark… (I don’t actually refer to myself in the third person), Why don’t you put the links in a blog so that it looks like you are being helpful!” I can’t tell you how many times I’ve had to go back to some of my old blogs to remember how I did something. Seriously people, you need to start a blog, it’s the best way to remember how the frick you got something to work… and it looks like you are being helpful when in reality you are just forgetful. So… where was I? Oh yeah.. essential information that I’ve needed from time to time when I was not using Visual Studio. All of this info has come in handy from time to time. Know about these things and keep them in your tool belt, it’s amazing the stuff you can accomplish with just knowing where to look. What Why SPServices Widely used library written by Marc Anderson used to call SharePoint Web Services with jQuery jQuery For SPServices and other cool stuff Easy Tabs Essential tool for quick page enhancements. This widely used too from Christophe Humbert groups multiple web parts into one tabbed display. Very quick and easy way to get oohs and ahs from End Users. Convert Calculated Columns to HTML Also from Christophe, I use this script all the time to convert html in my calculated columns to actually display as html and not with the tags. Unlocking the Mysteries of Data View Web Part XSL Tags This blog series from Marc Anderson makes it very easy to understand what’s going on with all those weird xsl tags in your data view web parts. Essential to make those things do what you want them to do. Creating Parent / Child list relationships (2007) Creating Parent / Child list relationships (2010) By far my most viewed blog posts (tens and tens of thousands). I have posts for both 2007 and 2010 that walk you through automatically setting the lookup id on a list to its “parent”. Set SharePoint Form fields using Query String Variables Also widely read, this one walks you through taking a variable from your Query String and set a form field to that value. Hmmm… I KNOW there are more, but I’m tired and drawing a blank. I’ll try to add them when I remember them (or need them again and think “Oh, I forgot to add that one”) But it’s a start, and please feel free to add your own in the comments… So, it’s YOUR turn to be helpful. What little tip or trick do you find yourself using ALL the time that you think everyone should know about??

Read the article

Oracle Announces Release of PeopleSoft HCM 9.1 Feature Pack 2

- by Jay Zuckert

Big things sometimes come in small packages. Today Oracle announced the availability of PeopleSoft HCM 9.1 Feature Pack 2 which delivers a new HR self service user experience that fundamentally changes the way managers and employees interact with the HCM system. Earlier this year we reviewed a number of new concept designs with our Customer Advisory Boards. With the accelerated feature pack development cycle we have adopted, these innovations are now available to all 9.1 customers without the need for an upgrade. There are no new products that need to be licensed for the capabilities below. For more details on Feature Pack 2, please see the Oracle press release. Included in Feature Pack 2 is a new search-based menu-free navigation that allows managers to search for employees by name and take actions directly from the secure search results. For example, a manager can now simply type in part of an employee’s first or last name and receive meaningful results from documents related to performance, compensation, learning, recruiting, career planning and more. Delivered actions can be initiated directly from these search results and the actions are securely tied to HCM security and user role. The feature pack also includes new pages that will enable managers to be more productive by aggregating key employee data into a single page. The new Manager Dashboard and Talent Summary provide a consolidated view of data related to a manager’s team and individual team members, respectively. The Manager Dashboard displays information relevant to their direct reports including team learning, objective alignment, alerts, and pending approvals requiring their attention. The Talent Summary provides managers with an aggregated view of talent management-related data for an individual employee including performance history, salary history, succession options, total rewards, and competencies. The information displayed in both the Manager Dashboard and Talent Summary is configurable by system administrators and can be personalized by each of your managers. Other Feature Pack 2 enhancements allow organizations to administer Matrix or Dotted-Line Relationship Management, which addresses the challenge of tracking and maintaining project-based organizations that cut across the enterprise and geographic regions. From within the Company Directory and Org Viewer organization charts, managers now have access to manager self-service transactions from related actions. More than 70 manager and employee self-service transactions have been tied into the related action framework accessible from Org Viewer, Manager Dashboard, Talent Summary and Secure Enterprise Search (SES) results. In addition to making it easier to access manager self-service transactions, the feature pack delivers streamlined transaction pages making everyday tasks such as promoting an employee faster and more efficient. With the delivery of PeopleSoft HCM 9.1 Feature Pack 2, Oracle continues to deliver on its commitment to our PeopleSoft customers. With this feature pack, HCM 9.1 customers will be able to deploy the newest functionality quickly, without a major release upgrade, and realize added value from their existing PeopleSoft investment. For customers newly deploying 9.1, a new download with all of Feature Pack 2 will be available early next year. This will aslo include recertified upgrade paths from 8.8, 8.9 and 9.0, for customers in the upgrade process.

Read the article

Columbus Regional Airport Authority Cuts Unbudgeted Carryover Costs for Capital Projects by 88% in One Year

- by Melissa Centurio Lopes

Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} The Columbus Regional Airport Authority (CRAA) is a public entity that works to connect Central Ohio with the world. It oversees operations at three airports?Port Columbus International Airport, Rickenbacker International Airport, and Bolton Field Airport?and manages the Rickenbacker Inland Port and Foreign Trade Zone # 138. It was created in 2002 through the merger of the Columbus Airport Authority and Rickenbacker Port Authority. CRAA manages approximately 100 projects annually, including initiatives as diverse as road and runway construction and maintenance, terminal improvements, construction of a new air traffic control tower, technology infrastructure development, customer service projects, and energy conservation programs. CRAA deployed Oracle’s Primavera P6 Enterprise Project Portfolio Management to create a unified methodology for scheduling and capital cash flow management. Today, the organization manages schedules and costs for all of its capital projects by using Primavera to provide enterprise wide visibility. As a result, CRAA cut unbudgeted carryover costs from US$24.4 million in 2010 to US$3.5 million in 2011?an 88% improvement. "Oracle’s Primavera P6 and Primavera Contract Management are transforming project management at CRAA. We have enabled resource-loaded scheduling and expanded visibility into cash flow, which allowed us to reduce unbudgeted carryover by 88% in a single year.” – Alex Beaver, Manager, Project Controls Office, Columbus Regional Airport Authority Challenges Standardize project planning and management for the approximately 100 projects?including airport terminal upgrades to road and runway creation and rehabilitation?that the airport authority undertakes annually Improve control over project scheduling and budgets to reduce unplanned carryover costs from one fiscal year to the next Ensure on-time, on-budget completion of critical infrastructure projects that support the organization’s mission to connect Central Ohio with the world through its three airports and inland port Solutions · Used Primavera P6 Enterprise Project Portfolio Management to develop a unified methodology for scheduling and managing capital projects for the airport authority, including the organization’s largest capital project ever?a five-year runway construction project · Gained a single, consolidated view into the organization’s capital projects and the ability to drill down into resource-loaded schedules and cash flow, enabling CRAA to take action earlier to avert the impact of emerging issues?including budget overages and project delays · Cut unbudgeted carryover costs from US$24.4 million in 2010 to US$3.5 million in 2011?an 88% improvement Click here to view all of the solutions. “Oracle’s Primavera solutions are the industry standard for project management. They provide robust and proven functionality that give us the power to effectively schedule and manage budgets for a wide range of projects, from terminal maintenance, to runway work, to golf course redesign,” said Alex Beaver, manager, project controls office, Columbus Regional Airport Authority. Click here to read the full version of the customer success story.

Read the article

Ask the Readers: Would You Be Willing to Give Windows Up and Use a Different O.S.?

- by Asian Angel

When it comes to computers, Windows definitely rules the desktop in comparison to other operating systems. What we would like to know this week is if you would actually be willing to give up using Windows altogether and move to a different operating system on your computers. Note: This week’s Ask the Readers post is posing a hypothetical situation, so please refrain from starting arguments or a flame war in the comments. Good reasoned discussion is always welcome. There is no doubt that Windows is the dominant operating system in use today. Everywhere you go or look it is easy to find computers with Windows installed such as at work, home, the library, government offices, and more. For many people it is the operating system that they know and are comfortable with, which makes changing to a different operating system less appealing. Adding to the preference for Windows (or dependency based on your view) is the custom software that many businesses use on a daily basis. Throw in the high volume of people who depend on and use Microsoft Office as a standard for their business documents and it is little wonder that Windows is so dominant. So what would you use if you did decide to take a break from or permanently move away from Windows? If your choice is Linux then you have a large and wonderful variety of distributions to choose from based on what you want out of your system. Want a distribution that is easy to work with? You could choose Ubuntu, Linux Mint, or others that are engineered to be ready to go “out of the box”. Like a challenge? Perhaps Arch Linux is more your style. One of the most attractive features of all about Linux is the price…it is very hard to beat free! Maybe Mac OS X sounds like the perfect choice. It has a certain mystique and elegance associated with it and many OS X fans refuse to use anything else if given a choice. Then there is the soon to be released Chrome OS with its’ emphasis on cloud computing. This is a system that is definitely focused on being as low-maintenance and hassle-free as possible. Quick on, quick off, minimalist, and made to be portable. All of the system’s updates will occur automatically leaving you free to work and play in the cloud. But it does have its’ limitations…no installing all of those custom apps that you love using on Windows or other systems…it is literally all about the browsing window and web apps. So there you have it. If the opportunity presented itself would you, could you give Windows up and use a different operating system? Would it be easy or hard for you to do? Perhaps it would not really matter so long as you could do what you needed or wanted to do on a computer. And maybe this is the perfect time to try something new and find out…that new favorite operating system could be just an install disc away. Let us know your thoughts in the comments! How-To Geek Polls require Javascript. Please Click Here to View the Poll. Latest Features How-To Geek ETC The Complete List of iPad Tips, Tricks, and Tutorials The 50 Best Registry Hacks that Make Windows Better The How-To Geek Holiday Gift Guide (Geeky Stuff We Like) LCD? LED? Plasma? The How-To Geek Guide to HDTV Technology The How-To Geek Guide to Learning Photoshop, Part 8: Filters Improve Digital Photography by Calibrating Your Monitor The Brothers Mario – Epic Gangland Style Mario Brothers Movie Trailer [Video] Score Awesome Games on the Cheap with the Humble Indie Bundle Add a Colorful Christmas Theme to Your Windows 7 Desktop This Windows Hack Changes the Blue Screen of Death to Red Edit Images Quickly in Firefox with Pixlr Grabber Zoho Writer, Sheet, and Show Now Available in Chrome Web Store

Read the article

How to use DI and DI containers

- by Pinetree

I am building a small PHP mvc framework (yes, yet another one), mostly for learning purposes, and I am trying to do it the right way, so I'd like to use a DI container, but I am not asking which one to use but rather how to use one. Without going into too much detail, the mvc is divided into modules which have controllers which render views for actions. This is how a request is processed: a Main object instantiates a Request object, and a Router, and injects the Request into the Router to figure out which module was called. then it instantiates the Module object and sends the Request to that the Module creates a ModuleRouter and sends the Request to figure out the controller and action it then creates the Controller and the ViewRenderer, and injects the ViewRenderer into the Controller (so that the controller can send data to the view) the ViewRenderer needs to know which module, controller and action were called to figure out the path to the view scripts, so the Module has to figure out this and inject it to the ViewRenderer the Module then calls the action method on the controller and calls the render method on the ViewRenderer For now, I do not have any DI container set up, but what I do have are a bunch of initX() methods that create the required component if it is not already there. For instance, the Module has the initViewRenderer() method. These init methods get called right before that component is needed, not before, and if the component was already set it will not initialize it. This allows for the components to be switched, but it does not require manually setting them if they are not there. Now, I'd like to do this by implementing a DI container, but still keep the manual configuration to a bare minimum, so if the directory structure and naming convention is followed, everything should work, without even touching the config. If I use the DI container, do I then inject it into everything (the container would inject itself when creating a component), so that other components can use it? When do I register components with the DI? Can a component register other components with the DI during run-time? Do I create a 'common' config and use that? How do I then figure out on the fly which components I need and how they need to be set up? If Main uses Router which uses Request, Main then needs to use the container to get Module (or does the module need to be found and set beforehand? How?) Module uses Router but needs to figure out the settings for the ViewRenderer and the Controller on the fly, not in advance, so my DI container can't be setting those on the Module before the module figures out the controller and action... What if the controller needs some other service? Do I inject the container into every controller? If I start doing that, I might just inject it into everything... Basically I am looking for the best practices when dealing with stuff like this. I know what DI is and what DI containers do, but I am looking for guidance to using them in real life, and not some isolated examples on the net. Sorry for the lengthy post and many thanks in advance.

Read the article

How to display Sharepoint Data in a Windows Forms Application

- by Michael M. Bangoy

In this post I'm going to demonstrate how to retrieve Sharepoint data and display it on a Windows Forms Application. 1. Open Visual Studio 2010 and create a new Project. 2. In the project template select Windows Forms Application. 3. In order to communicate with Sharepoint from a Windows Forms Application we need to add the 2 Sharepoint Client DLL located in c:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\ISAPI. 4. Select the Microsoft.Sharepoint.Client.dll and Microsoft.Sharepoint.Client.Runtime.dll. (Your solution should look like the one below) 5. Open the Form1 in design view and from the Toolbox menu Add a Button, TextBox, Label and DataGridView on the form. 6. Next double click on the Load Button, this will open the code view of the form. Add Using statement to reference the Sharepoint Client Library then create two method for the Load Site Title and LoadList. See below: using System; using System.Collections.Generic; using System.ComponentModel; using System.Data; using System.Drawing; using System.Linq; using System.Text; using System.Security; using System.Windows.Forms; using SP = Microsoft.SharePoint.Client; namespace ClientObjectModel { public partial class Form1 : Form { // url of the Sharepoint site const string _context = "theurlofthesharepointsite"; public Form1() { InitializeComponent(); } private void Form1_Load(object sender, EventArgs e) { } private void getsitetitle() { SP.ClientContext context = new SP.ClientContext(_context); SP.Web _site = context.Web; context.Load(_site); context.ExecuteQuery(); txttitle.Text = _site.Title; context.Dispose(); } private void loadlist() { using (SP.ClientContext _clientcontext = new SP.ClientContext(_context)) { SP.Web _web = _clientcontext.Web; SP.ListCollection _lists = _clientcontext.Web.Lists; _clientcontext.Load(_lists); _clientcontext.ExecuteQuery(); DataTable dt = new DataTable(); DataColumn column; DataRow row; column = new DataColumn(); column.DataType = Type.GetType("System.String"); column.ColumnName = "List Title"; dt.Columns.Add(column); foreach (SP.List listitem in _lists) { row = dt.NewRow(); row["List Title"] = listitem.Title; dt.Rows.Add(row); } dataGridView1.DataSource = dt; } } private void cmdload_Click(object sender, EventArgs e) { getsitetitle(); loadlist(); } } } 7. That’s it. Hit F5 to run the application then click the Load Button. Your screen should like the one below. Hope this helps.

Read the article

Backup SQL Database Federation

- by Herve Roggero

One of the amazing features of Windows Azure SQL Database is the ability to create federations in order to scale your cloud databases. However until now, there were very few options available to backup federated databases. In this post I will show you how Enzo Cloud Backup can help you backup, and restore your federated database easily. You can restore federated databases in SQL Database, or even on SQL Server (as regular databases). Generally speaking, you will need to perform the following steps to backup and restore the federations of a SQL Database: Backup the federation root Backup the federation members Restore the federation root Restore the federation members These actions can be automated using: the built-in scheduler of Enzo Cloud Backup, the command-line utilities, or the .NET Cloud Backup API provided, giving you complete control on how you want to perform your backup and restore operations. Backing up federations Let’s look at the tool to backup federations. You can explore your existing federations by using the Enzo Cloud Backup application as shown below. As you can see, the federation root and the various federations available are shown in separate tabs for convenience. You would first need to backup the federation root (unless you intend to restore the federation member on a local SQL Server database and you don’t need what’s in the federation root). The steps are similar than those to backup a federation member, so let’s proceed to backing up a federation member. You can click on a specific federation member to view the database details by clicking at the tab that contains your federation member. You can see the size currently consumed and a summary of its content at the bottom of the screen. If you right-click on a specific range, you can choose to backup the federation member. This brings up a window with the details of the federation member already filled out for you, including the value of the member that is used to select the federation member. Notice that the list of Federations includes “Federation Root”, which is what you need to select to backup the federation root (you can also do that directly from the root database tab). Once you provide at least one backup destination, you can begin the backup operation. From this window, you can also schedule this operation as a job and perform this operation entirely in the cloud. You can also “filter” the connection, so that only the specific member value is backed up (this will backup all the global tables, and only the records for which the distribution value is the one specified). You can repeat this operation for every federation member in your federation. Restoring Federations Once backed up, you can restore your federations easily. Select the backup device using the tool, then select Restore. The following window will appear. From here you can create a new root database. You can also view the backup properties, showing you exactly which federations will be created. Under the Federations tab, you can select how the federations will be created. I chose to recreate the federations and let the tool perform all the SPLIT operations necessary to recreate the same number of federation members. Other options include to create the first federation member only, or not to create the federation members at all. Once the root database has been restored and the federation members have been created, you can restore the federation members you previously backed up. The screen below shows you how to restore a backup of a federation member into a specific federation member (the details of the federation member are provided to make it easier to identify). Conclusion This post gave you an overview on how to backup and restore federation roots and federation members. The backup operations can be setup once, then scheduled daily.

Read the article

Take Snapshots of Your Favorite Movie Scenes in VLC

- by DigitalGeekery

Have you ever wanted to grab a screenshot of your favorite TV or movie scene? Today we’ll show you how to do so with VLC Media Player. If you don’t have it already, download and install the latest version of VLC (link below). Start playing your movie, and to grab a snapshot, select Video from the menu and click Snapshot. When you take a snapshot, by default a preview is displayed at the top left and the folder where the file is saved is briefly displayed on the screen. If you enable the Advanced Controls, you can take a snapshot with a click of a button, and advance the video frame by frame to get a more accurate shot. To enable the Advanced Controls, select View and Advanced Controls. You’ll see the Advanced Controls buttons appear below the slider. Now just click on the Snapshot button to grab an image. You can more easily control the frame you wish to grab by pressing the Frame by Frame button. You can pause the movie when it is near the perfect spot for your snapshot, and then press the Frame by Frame button to advance a single frame at a time. By default, the snapshots are saved as PNG files in your My Pictures folder in Windows. You can change those setting in the Preferences. First, you’ll need to select All under Show settings at the bottom. Then click on Video on the left. Scroll down a bit and you’ll see the Snapshot section. Here you can change the format from PNG to JPG, change the directory to which the snapshots are stored, turn on and off the preview, and change the filename prefix. Click Save when finished. Now you have nice screenshots of your favorite movie to display as you wish…such as a Desktop Background! VLC is an excellent media player that runs on Windows, Mac, and Linux. In addition to playing almost any media file, it also makes grabbing screenshots of your videos a breeze. Want to know more about VLC? Check out some of our previous articles like how to rip DVDs and how to set a video as your desktop wallpaper. Download the Latest version of VLC Similar Articles Productive Geek Tips Desktop Fun: Rural Scenes WallpapersAutomatically Mount and View ISO files in Windows 7 Media CenterHow to Make/Edit a movie with Windows Movie Maker in Windows VistaAdd Images and Metadata to Windows 7 Media Center Movie LibraryQuickly Find Movies to Watch at Hello Movies TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 tinysong gives a shortened URL for you to post on Twitter (or anywhere) 10 Superb Firefox Wallpapers OpenDNS Guide Google TV The iPod Revolution Ultimate Boot CD can help when disaster strikes

Read the article

Part 6: Extensions vs. Modifications

- by volker.eckardt(at)oracle.com

Customizations = Extensions + Modifications In the EBS terminology, a customization can be an extension or a modification. Extension means that you mainly create your own code from scratch. You may utilize existing views, packages and java classes, but your code is unique. Modifications are quite different, because here you take existing code and change or enhance certain areas to achieve a slightly different behavior. Important is that it doesn't matter if you place your code at the same or at another place – it is a modification. It is also not relevant if you leave the original code enabled or not! Why? Here is the answer: In case the original code piece you have taken as your base will get patched, you need to copy the source again and apply all your changes once more. If you don't do that, you may get different results or write different data compared to the standard – this causes a high risk! Here are some guidelines how to reduce the risk: Invest a bit longer when searching for objects to select data from. Rather choose a view than a table. In case Oracle development changes the underlying tables, the view will be more stable and is therefore a better choice. Choose rather public APIs over internal APIs. Same background as before: although internal structure might change, the public API is more stable. Use personalization and substitution rather than modification. Spend more time to check if the requirement can be covered with such techniques. Build a project code library, avoid that colleagues creating similar functionality multiple times. Otherwise you have to review lots of similar code to determine the need for correction. Use the technique of “flagged files”. Flagged files is a way to mark a standard deployment file. If you run the patch analyse (within Application Manager), the analyse result will list flagged standard files in case they will be patched. If you maintain a cross reference to your own CEMLIs, you can easily determine which CEMLIs have to be reviewed. Implement a code review process. This can be done by utilizing team internal or external persons. If you implement such a team internal process, your team members will come up with suggestions how to improve the code quality by themselves. Review heavy customizations regularly, to identify options to reduce complexity; let's say perform this every 6th month. You may not spend days for such a review, but a high level cross check if the customization can be reduced is suggested. De-install customizations which are no more required. Define a process for this. Add a section into the technical documentation how to uninstall and what are possible implications. Maintain a cross reference between CEMLIs and between CEMLIs, EBS modules and business processes. Keep this list up to date! Share this list! By following these guidelines, you are able to improve product stability. Although we might not be able to avoid modifications completely, we can give a much better advise to developers and to our test team. Summary: Extensions and Modifications have to be handled differently during their lifecycle. Modifications implicate a much higher risk and should therefore be reviewed more frequently. Good cross references allow you to give clear advise for the testing activities.

Read the article

Incorrect lighting results with deferred rendering

- by Lasse

I am trying to render a light-pass to a texture which I will later apply on the scene. But I seem to calculate the light position wrong. I am working on view-space. In the image above, I am outputting the attenuation of a point light which is currently covering the whole screen. The light is at 0,10,0 position, and I transform it to view-space first: Vector4 pos; Vector4 tmp = new Vector4 (light.Position, 1); // Transform light position for shader Vector4.Transform (ref tmp, ref Camera.ViewMatrix, out pos); shader.SendUniform ("LightViewPosition", ref pos); Now to me that does not look as it should. What I think it should look like is that the white area should be on the center of the scene. The camera is at the corner of the scene, and it seems as if the light would move along with the camera. Here's the fragment shader code: void main(){ // default black color vec3 color = vec3(0); // Pixel coordinates on screen without depth vec2 PixelCoordinates = gl_FragCoord.xy / ScreenSize; // Get pixel position using depth from texture vec4 depthtexel = texture( DepthTexture, PixelCoordinates ); float depthSample = unpack_depth(depthtexel); // Get pixel coordinates on camera-space by multiplying the // coordinate on screen-space by inverse projection matrix vec4 world = (ImP * RemapMatrix * vec4(PixelCoordinates, depthSample, 1.0)); // Undo the perspective calculations vec3 pixelPosition = (world.xyz / world.w) * 3; // How far the light should reach from it's point of origin float lightReach = LightColor.a / 2; // Vector in between light and pixel vec3 lightDir = (LightViewPosition.xyz - pixelPosition); float lightDistance = length(lightDir); vec3 lightDirN = normalize(lightDir); // Discard pixels too far from light source //if(lightReach < lightDistance) discard; // Get normal from texture vec3 normal = normalize((texture( NormalTexture, PixelCoordinates ).xyz * 2) - 1); // Half vector between the light direction and eye, used for specular component vec3 halfVector = normalize(lightDirN + normalize(-pixelPosition)); // Dot product of normal and light direction float NdotL = dot(normal, lightDirN); float attenuation = pow(lightReach / lightDistance, LightFalloff); // If pixel is lit by the light if(NdotL > 0) { // I have moved stuff from here to above so I can debug them. // Diffuse light color color += LightColor.rgb * NdotL * attenuation; // Specular light color color += LightColor.xyz * pow(max(dot(halfVector, normal), 0.0), 4.0) * attenuation; } RT0 = vec4(color, 1); //RT0 = vec4(pixelPosition, 1); //RT0 = vec4(depthSample, depthSample, depthSample, 1); //RT0 = vec4(NdotL, NdotL, NdotL, 1); RT0 = vec4(attenuation, attenuation, attenuation, 1); //RT0 = vec4(lightReach, lightReach, lightReach, 1); //RT0 = depthtexel; //RT0 = 100 / vec4(lightDistance, lightDistance, lightDistance, 1); //RT0 = vec4(lightDirN, 1); //RT0 = vec4(halfVector, 1); //RT0 = vec4(LightColor.xyz,1); //RT0 = vec4(LightViewPosition.xyz/100, 1); //RT0 = vec4(LightPosition.xyz, 1); //RT0 = vec4(normal,1); } What am I doing wrong here?

Read the article

Heterogeneous Datacenter Management with Enterprise Manager 12c

- by Joe Diemer

The following is a Guest Blog, contributed by Bryce Kaiser, Product Manager at Blue MedoraWhen I envision a perfect datacenter, it would consist of technologies acquired from a single vendor across the entire server, middleware, application, network, and storage stack - Apps to Disk - that meets your organization’s every IT requirement with absolute best-of-breed solutions in every category. To quote a familiar motto, your datacenter would consist of "Hardware and Software, Engineered to Work Together". In almost all cases, practical realities dictate something far less than the IT Utopia mentioned above. You may wish to leverage multiple vendors to keep licensing costs down, a single vendor may not have an offering in the IT category you need, or your preferred vendor may quite simply not have the solution that meets your needs. In other words, your IT needs dictate a heterogeneous IT environment. Heterogeneity, however, comes with additional complexity. The following are two pretty typical challenges:1) No End-to-End Visibility into the Enterprise Wide Application Deployment. Each vendor solution which is added to an infrastructure may bring its own tooling creating different consoles for different vendor applications and platforms.2) No Visibility into Performance Bottlenecks. When multiple management tools operate independently, you lose diagnostic capabilities including identifying cross-tier issues with database, hung-requests, slowness, memory leaks and hardware errors/failures causing DB/MW issues. As adoption of Oracle Enterprise Manager (EM) has increased, especially since the release of Enterprise Manager 12c, Oracle has seen an increase in the number of customers who want to leverage their investments in EM to manage non-Oracle workloads. Enterprise Manager provides a single pane of glass view into their entire datacenter. By creating a highly extensible framework via the Oracle EM Extensibility Development Kit (EDK), Oracle has provided the tooling for business partners such as my company Blue Medora as well as customers to easily fill gaps in the ecosystem and enhance existing solutions. As mentioned in the previous post on the Enterprise Manager Extensibility Exchange, customers have access to an assortment of Oracle and Partner provided solutions through this Exchange, which is accessed at http://www.oracle.com/goto/emextensibility. Currently, there are over 80 Oracle and partner provided plug-ins across the EM 11g and EM 12c versions. Blue Medora is one of those contributing partners, for which you will find 3 of our solutions including our flagship plugin for VMware. Let's look at Blue Medora’s VMware plug-in as an example to what I'm trying to convey. Here is a common situation solved by true visibility into your entire stack:Symptoms• My database is bogging down, however the database appears okay internally. Maybe it’s starved for resources?• My OS tooling is showing everything is “OK”. Something doesn’t add up. Root cause• Through the VMware plugin we can see the problem is actually on the virtualization layer Solution• From within Enterprise Manager -- the same tool you use for all of your database tuning -- we can overlay the data of the database target, host target, and virtual machine target for a true picture of the true root cause. Here is the console view: Perhaps your monitoring conditions are more specific to your environment. No worries, Enterprise Manager still has you covered. With Metric Extensions you have the “Next Generation” of User-Defined Metrics, which easily bring the power of your existing management scripts into a single console while leveraging the proven Enterprise Manager framework. Simply put, Oracle Enterprise manager boasts a growing ecosystem that provides the single pane of glass for your entire datacenter from the database and beyond. Bryce can be contacted at [email protected]

Read the article

Dallas First Regionals 2012– For Inspiration and Recognition of Science and Technology

- by T

Wow! That is all I have to say after the last 3 days. Three full fun filled days in a world that fed the geek, sparked the competitor, inspired the humanitarian, encouraged the inventor, and continuously warmed my heart. As part of the Dallas First Regionals, I was awed by incredible students who teach as much as they learn, inventive and truly caring mentors that make mentoring look easy, and completely passionate and dedicated volunteers that bring meaning to giving all that you have and making events fun and safe for all. If you have any interest in innovation, robotics, or highly motivated students, I can’t recommend anything any higher than visiting a First Robotics event. This is my third year with First and I was honored enough to serve the Dallas First Regionals as both a Web Site evaluator and as the East Field Volunteer Coordinator. This was also the first year my daughter volunteered with me. My daughter and I both recognize how different the First program is from other team events. The difference with First is that everyone is a first class citizen. It is a difference we can feel through experiencing and observing interactions between executives, respected engineers, students, and event staff. Even with a veracious competition, you still find a lot of cooperation and we never witnessed any belittling between teams or individuals. First Robotics coined the term “Gracious Professionalism”. It's a way of doing things that encourages high-quality work, emphasizes the value of others, and respects individuals and the community.1 I was introduced to this term as the Volunteer Coordinator when I was preparing the volunteer instructional speech. Through the next few days, I discovered it is truly core to everything that First does. One of the ways First accomplishes Gracious Professionalism is by utilizing another term they came up with which is “CoopertitionTM”. At FIRST, CoopertitionTM is displaying unqualified kindness and respect in the face of fierce competition.1 One of the things I never liked about sports was the need to “destroy” the other team. First has really found a way to integrate CoopertitionTM into the rules so teams can be competitive and part of that competition rewards cooperation. Oh and did I mention it has ROBOTS!!! This year it had basket ball playing Kinect connected, remote controlled, robots! There are not words for how exciting these games are. You HAVE to check out this years game, Rebound Rumble, on youtube or you can view live action on Dallas First Video (as of this posting, the recording haven’t posted yet but should be there soon). There are also some images below. Whatever it is, these students get it and exemplify it and these mentors ooze with it. I am glad that First supports these events so we can all learn and be inspired by these exceptional students and mentors. I know that no matter how much I give, it will never compare to what I gain volunteering at First. Even if you don’t have time to volunteer, you owe it to yourself to go check out one of these events. See what the future holds, be inspired, be encouraged, take some knowledge, leave some knowledge and most of all, have FUN. That is what First is all about and thanks to First, I get it. First Dallas Regionals 2012 VIEW SLIDE SHOW DOWNLOAD ALL 1. USFirst http://www.usfirst.org/aboutus/gracious-professionalism

Read the article

JOGL2 test compiles, but doesn't execute - help?

- by Chuchinyi

I have a problem with JOGL2. My JOGL2Template.java compiles fine, but executing it results in the following error: D:\java\java\jogl>javac JOGL2Template.java <== compile ok D:\java\java\jogl>java JOGL2Template <== execute error Exception in thread "main" java.lang.ExceptionInInitializerError at javax.media.opengl.GLProfile.<clinit>(GLProfile.java:1176) at JOGL2Template.<init>(JOGL2Template.java:24) at JOGL2Template.main(JOGL2Template.java:57) Caused by: java.lang.SecurityException: no certificate for gluegen-rt.dll in D:\ java\lib\gluegen-rt-natives-windows-i586.jar at com.jogamp.common.util.JarUtil.validateCertificate(JarUtil.java:350) at com.jogamp.common.util.JarUtil.validateCertificates(JarUtil.java:324) at com.jogamp.common.util.cache.TempJarCache.validateCertificates(TempJa rCache.java:328) at com.jogamp.common.util.cache.TempJarCache.bootstrapNativeLib(TempJarC ache.java:283) at com.jogamp.common.os.Platform$3.run(Platform.java:308) at java.security.AccessController.doPrivileged(Native Method) at com.jogamp.common.os.Platform.loadGlueGenRTImpl(Platform.java:298) at com.jogamp.common.os.Platform.<clinit>(Platform.java:207) ... 3 more Here is the JOGL2Template.java source code: import java.awt.Dimension; import java.awt.Frame; import java.awt.event.WindowAdapter; import java.awt.event.WindowEvent; import javax.media.opengl.GLAutoDrawable; import javax.media.opengl.GLCapabilities; import javax.media.opengl.GLEventListener; import javax.media.opengl.GLProfile; import javax.media.opengl.awt.GLCanvas; import com.jogamp.opengl.util.FPSAnimator; import javax.swing.JFrame; /* * JOGL 2.0 Program Template For AWT applications */ public class JOGL2Template extends JFrame implements GLEventListener { private static final int CANVAS_WIDTH = 640; // Width of the drawable private static final int CANVAS_HEIGHT = 480; // Height of the drawable private static final int FPS = 60; // Animator's target frames per second // Constructor to create profile, caps, drawable, animator, and initialize Frame public JOGL2Template() { // Get the default OpenGL profile that best reflect your running platform. GLProfile glp = GLProfile.getDefault(); // Specifies a set of OpenGL capabilities, based on your profile. GLCapabilities caps = new GLCapabilities(glp); // Allocate a GLDrawable, based on your OpenGL capabilities. GLCanvas canvas = new GLCanvas(caps); canvas.setPreferredSize(new Dimension(CANVAS_WIDTH, CANVAS_HEIGHT)); canvas.addGLEventListener(this); // Create a animator that drives canvas' display() at 60 fps. final FPSAnimator animator = new FPSAnimator(canvas, FPS); addWindowListener(new WindowAdapter() { // For the close button @Override public void windowClosing(WindowEvent e) { // Use a dedicate thread to run the stop() to ensure that the // animator stops before program exits. new Thread() { @Override public void run() { animator.stop(); System.exit(0); } }.start(); } }); add(canvas); pack(); setTitle("OpenGL 2 Test"); setVisible(true); animator.start(); // Start the animator } public static void main(String[] args) { new JOGL2Template(); } @Override public void init(GLAutoDrawable drawable) { // Your OpenGL codes to perform one-time initialization tasks // such as setting up of lights and display lists. } @Override public void display(GLAutoDrawable drawable) { // Your OpenGL graphic rendering codes for each refresh. } @Override public void reshape(GLAutoDrawable drawable, int x, int y, int w, int h) { // Your OpenGL codes to set up the view port, projection mode and view volume. } @Override public void dispose(GLAutoDrawable drawable) { // Hardly used. } } Any ideas what might be the cause of these errors?

Read the article

ARTS Reference Model for Retail

- by Sanjeev Sharma

Consider a hypothetical scenario where you have been tasked to set up retail operations for a electronic goods or daily consumables or a luxury brand etc. It is very likely you will be faced with the following questions: What are the essential business capabilities that you must have in place? What are the essential business activities under-pinning each of the business capabilities, identified in Step 1? What are the set of steps that you need to perform to execute each of the business activities, identified in Step 2? Answers to the above will drive your investments in software and hardware to enable the core retail operations. More importantly, the choices you make in responding to the above questions will several implications in the short-run and in the long-run. In the short-term, you will incur the time and cost of defining your technology requirements, procuring the software/hardware components and getting them up and running. In the long-term, as you grow in operations organically or through M&A, partnerships and franchiser business models you will invariably need to make more technology investments to manage the greater complexity (scale and scope) of business operations. "As new software applications, such as time & attendance, labor scheduling, and POS transactions, just to mention a few, are introduced into the store environment, it takes a disproportionate amount of time and effort to integrate them with existing store applications. These integration projects can add up to 50 percent to the time needed to implement a new software application and contribute significantly to the cost of the overall project, particularly if a systems integrator is called in. This has been the reality that all retailers have had to live with over the last two decades. The effect of the environment has not only been to increase costs, but also to limit retailers' ability to implement change and the speed with which they can do so." (excerpt taken from here) Now, one would think a lot of retailers would have already gone through the pain of finding answers to these questions, so why re-invent the wheel? Precisely so, a major effort began almost 17 years ago in the retail industry to make it less expensive and less difficult to deploy new technology in stores and at the retail enterprise level. This effort is called the Association for Retail Technology Standards (ARTS). Without standards such as those defined by ARTS, you would very likely end up experiencing the following: Increased Time and Cost due to resource wastage arising from re-inventing the wheel i.e. re-creating vanilla processes from scratch, and incurring, otherwise avoidable, mistakes and errors by ignoring experience of others Sub-optimal Process Efficiency due to narrow, isolated view of processes thereby ignoring process inter-dependencies i.e. optimizing parts but not the whole, and resulting in lack of transparency and inter-departmental finger-pointing Embracing ARTS standards as a blue-print for establishing or managing or streamlining your retail operations can benefit you in the following ways: Improved Time-to-Market from parity with industry best-practice processes e.g. ARTS, thus avoiding “reinventing the wheel” for common retail processes and focusing more on customizing processes for differentiations, and lowering integration complexity and risk with a standardized vocabulary for exchange between internal and external i.e. partner systems Lower Operating Costs by embracing the ARTS enterprise-wide process reference model for developing and streamlining retail operations holistically instead of a narrow, silo-ed view, and procuring IT systems in compliance with ARTS thus avoiding IT budget marginalization While parity with industry standards such as ARTS business process model by itself does not create a differentiation, it does however provide a higher starting point for bridging the strategy-execution gap in setting up and improving retail operations.

Read the article

Projective texture and deferred lighting

- by Vodácek

In my previous question, I asked whether it is possible to do projective texturing with deferred lighting. Now (more than half a year later) I have a problem with my implementation of the same thing. I am trying to apply this technique in light pass. (my projector doesn't affect albedo). I have this projector View a Projection matrix: Matrix projection = Matrix.CreateOrthographicOffCenter(-halfWidth * Scale, halfWidth * Scale, -halfHeight * Scale, halfHeight * Scale, 1, 100000); Matrix view = Matrix.CreateLookAt(Position, Target, Vector3.Up); Where halfWidth and halfHeight is are half of the texture's width and height, Position is the Projector's position and target is the projector's target. This seems to be ok. I am drawing full screen quad with this shader: float4x4 InvViewProjection; texture2D DepthTexture; texture2D NormalTexture; texture2D ProjectorTexture; float4x4 ProjectorViewProjection; sampler2D depthSampler = sampler_state { texture = <DepthTexture>; minfilter = point; magfilter = point; mipfilter = point; }; sampler2D normalSampler = sampler_state { texture = <NormalTexture>; minfilter = point; magfilter = point; mipfilter = point; }; sampler2D projectorSampler = sampler_state { texture = <ProjectorTexture>; AddressU = Clamp; AddressV = Clamp; }; float viewportWidth; float viewportHeight; // Calculate the 2D screen position of a 3D position float2 postProjToScreen(float4 position) { float2 screenPos = position.xy / position.w; return 0.5f * (float2(screenPos.x, -screenPos.y) + 1); } // Calculate the size of one half of a pixel, to convert // between texels and pixels float2 halfPixel() { return 0.5f / float2(viewportWidth, viewportHeight); } struct VertexShaderInput { float4 Position : POSITION0; }; struct VertexShaderOutput { float4 Position :POSITION0; float4 PositionCopy : TEXCOORD1; }; VertexShaderOutput VertexShaderFunction(VertexShaderInput input) { VertexShaderOutput output; output.Position = input.Position; output.PositionCopy=output.Position; return output; } float4 PixelShaderFunction(VertexShaderOutput input) : COLOR0 { float2 texCoord =postProjToScreen(input.PositionCopy) + halfPixel(); // Extract the depth for this pixel from the depth map float4 depth = tex2D(depthSampler, texCoord); //return float4(depth.r,0,0,1); // Recreate the position with the UV coordinates and depth value float4 position; position.x = texCoord.x * 2 - 1; position.y = (1 - texCoord.y) * 2 - 1; position.z = depth.r; position.w = 1.0f; // Transform position from screen space to world space position = mul(position, InvViewProjection); position.xyz /= position.w; //compute projection float3 projection=tex2D(projectorSampler,postProjToScreen(mul(position,ProjectorViewProjection)) + halfPixel()); return float4(projection,1); } In first part of pixel shader is recovered position from G-buffer (this code I am using in other shaders without any problem) and then is tranformed to projector viewprojection space. Problem is that projection doesn't appear. Here is an image of my situation: The green lines are the rendered projector frustum. Where is my mistake hidden? I am using XNA 4. Thanks for advice and sorry for my English. EDIT: Shader above is working but projection was too small. When I changed the Scale property to a large value (e.g. 100), the projection appears. But when the camera moves toward the projection, the projection expands, as can bee seen on this YouTube video.

Read the article

Workarounds for supporting MVVM in the Silverlight ContextMenu service

- by cibrax

As I discussed in my last post, some of the Silverlight controls does not support MVVM quite well out of the box without specific customizations. The Context Menu is another control that requires customizations for enabling data binding on the menu options. There are a few things that you might want to expose as view model for a menu item, such as the Text, the associated icon or the command that needs to be executed. That view model should look like this, public class MenuItemModel { public string Name { get; set; } public ICommand Command { get; set; } public Image Icon { get; set; } public object CommandParameter { get; set; } } This is how you can modify the built-in control to support data binding on the model above, public class CustomContextMenu : ContextMenu { protected override DependencyObject GetContainerForItemOverride() { CustomMenuItem item = new CustomMenuItem(); Binding commandBinding = new Binding("Command"); item.SetBinding(CustomMenuItem.CommandProperty, commandBinding); Binding commandParameter = new Binding("CommandParameter"); item.SetBinding(CustomMenuItem.CommandParameterProperty, commandParameter); return item; } } public class CustomMenuItem : MenuItem { protected override DependencyObject GetContainerForItemOverride() { CustomMenuItem item = new CustomMenuItem(); Binding commandBinding = new Binding("Command"); item.SetBinding(CustomMenuItem.CommandProperty, commandBinding); return item; } } The change is very similar to the one I made in the TreeView for manually data binding some of the Menu item properties to the model. Once you applied that change in the control, you can define it in your XAML like this. <toolkit:ContextMenuService.ContextMenu> <e:CustomContextMenu ItemsSource="{Binding MenuItems}"> <e:CustomContextMenu.ItemTemplate> <DataTemplate> <StackPanel Orientation="Horizontal" > <ContentPresenter Margin="0 0 4 0" Content="{Binding Icon}" /> <TextBlock Margin="0" Text="{Binding Name, Mode=OneWay}" FontSize="12"/> </StackPanel> </DataTemplate> </e:CustomContextMenu.ItemTemplate> </e:CustomContextMenu> </toolkit:ContextMenuService.ContextMenu> The property MenuItems associated to the “ItemsSource” in the parent model just returns a list of supported options (menu items) in the context menu. this.menuItems = new MenuItemModel[] { new MenuItemModel { Name = "My Command", Command = new RelayCommand(OnCommandClick), Icon = ImageLoader.GetIcon("command.png") } }; The only problem I found so far with this approach is that the context menu service does not support a HierarchicalDataTemplate in case you want to have an hierarchy in the context menu (MenuItem –> Sub menu items), but I guess we can live without that.

Read the article

Managing software projects - advice needed

- by Callum

I work for a large government department as part of an IT team that manages and develops websites as well as stand alone web applications. We’re running in to problems somewhere in the SDLC that don’t rear their ugly head until time and budget are starting to run out. We try to be “Agile” (software specifications are not as thorough as possible, clients have direct access to the developers any time they want) and we are also in a reasonably peculiar position in that we are not allowed to make profit from the services we provide. We only service the divisions within our government department, and can only charge for the time and effort we actually put in to a project. So if we deliver a project that we have over-quoted on, we will only invoice for the actual time spent. Our software specifications are not as thorough as they could be, but they always include at a minimum: Wireframe mockups for every form view A data dictionary of all field inputs Descriptions of any business rules that affect the system Descriptions of the outputs I’m new to software management, but I’ve overseen enough software projects now to know that as soon as users start observing demos of the system, they start making a huge amount of requests like “Can we add a few more fields to this report.. can we redesign the look of this interface.. can we send an email at this part of the workflow.. can we take this button off this view.. can we make this function redirect to a different screen.. can we change some text on this screen… can we create a special account where someone can log in and get access to X… this report takes too long to run can it be optimised.. can we remove this step in the workflow… there’s got to be a better image we can put here…” etc etc etc. Some changes are tiny and can be implemented reasonably quickly.. but there could be up to 50-100 or so of such requests during the course of the SDLC. Other change requests are what clients claim they “just assumed would be part of the system” even if not explicitly spelled out in the spec. We are having a lot of difficulty managing this process. With no experienced software project managers in our team, we need to come up with a better way to both internally identify whether work being requested is “out of spec”, and be able to communicate this to a client in such a manner that they can understand why what they are asking for is “extra” work. We need a way to track this work and be transparent with it. In the spirit of Agile development where we are not spec'ing software systems in to the ground and back again before development begins, and bearing in mind that clients have access to any developer any time they want it, I am looking for some tips and pointers from experienced software project managers on how to handle this sort of "scope creep" problem, in tracking it, being transparent with it, and communicating it to clients such that they understand it. Happy to clarify anything as needed. I really appreciate anyone who takes the time to offer some advice. Thanks.

Read the article

BI&EPM in Focus November 2012

- by Mike.Hallett(at)Oracle-BI&EPM

Customers · San Diego Unified School District Harnesses Attendance, Procurement, and Operational Data with Oracle Exalytics, Generating $4.4 Million in Savings · NilsonGroup chooses Oracle Exalytics In-Memory Machine as their solution to access critical data to keep its stores competitive with real-time Mobile BI: Video · Nykredit, in the Danish Financial Sector, describes their experiences from testing the Exalytics Business Intelligence Machine: Video · Sodexo chose Oracle Exalytics as their business analytics platform: Video · AstraZeneca (US, Canada, MedImmune) Improves Insight, Analytics, and Reporting, Enterprisewide with Unified Planning on a Single Platform · Experian Consolidates Reporting Systems for One, Global View of Financial Data and Improves Planning for Continued Growth · Munchkin Gives its Line of Children’s Products Plenty of Room to Grow in an Upgraded Enterprise Application Environment · Top 20 EPM Customer Snapshots, in One Handy Booklet (link) · Customer and Partner Successes: Link to Complete Archive Enterprise Performance Management · Nov 15: Is Hope and Email the Core of your Reconciliation Process? (link) · Replay: Integrated Business Planning, Featuring Leggett & Platt (link) · Whitepaper: The New Competitive Advantage - Strategic CIO's Embrace the Cloud (link) · Press: Oracle Enterprise Performance Management Driving Significant Improvements in Budget Management and Reporting for Public Sector Organizations (link) · Enterprise Performance Management Video Feature Overviews, Now Available on YouTube (link) · NEW Solution Brief - Oracle Hyperion Planning on the Oracle Exalytics In-Memory Machine (link) · For Insurance sector: Datasheet for new release V2.0 - Oracle Quantitative Management and Reporting for Solvency II (link) · Whitepaper FSN 2012: Managing Risk and Uncertainty, an Executive's Guide to Integrated Business Planning (link) · NEW Datasheet for Oracle Planning and Budgeting Cloud Service (link) · Blog: Planning in the Cloud - For Real Business Intelligence · Press: Latest Release of Oracle Exalytics In-Memory Machine Software Enables Customers to View and Analyze Data at the Speed of Business (link) · Press: New Release (11.1.1.6.2BP1) of Oracle Business Intelligence Enables Users to Quickly Access and Analyze Key Business Information, Anytime, Anywhere (link) · Mark Hurd Interviewed on USA Today about Big Data & Analytics (link) · Whitepaper: Mastering Big Data - CFO Strategies to Transform Insight into Opportunity (link) · Nov 15: Improve Asset Utilization. Achieve Greater Profitability: Oracle Enterprise Asset Management Analytics (link) · Replay: Oracle Enterprise Asset Mgmt Analytics and Oracle Manufacturing Analytics (link) · Overload to Impact: An Industry Scorecard on Big Data Business Challenges (link) · Webcast Replay: Overview of Oracle Endeca Informational Discovery (link) · OBIEE 11g: Required and Recommended Patches and Patch Sets (link)

Read the article

Questions to ask to ensure someone understands programming? (and iOS)

- by Stephen J

So, I've been tutoring my friend for 2 years. Most people learn programming on their own in 3-6 months, (sans algorithms). It's confusing 'cause he'll run anywhere I tell him to, understands how to read C and C++ honestly better than the average college student, and he'll modify and repeat anything I do... but for the love of god he doesn't move on to new things and he still has test anxiety. I've recently realized he's copied and toyed with existing, but not once gained an understanding of why. I was under the impression he was learning fast because he could write it, but when you say "Make a function that takes an NSString" and he says "How?" and I say "The same way you make ANY function that takes any parameter, NSString is just a type like int" and all I hear is "No, it's an NSString, it's a special thing." and we get into an arguing match 'cause I'm like "It's just a class like any other class, you've used them for months now" and blah... I've subconsciously avoided comprehension questions because of this. Anyway, if you have him copy a program and say "Just initialize it" "Where?" "I don't care, didLoad or initWithCoder or Awake from nib, anywhere it gets initialized" and "No, it has to be exactly where you had it!" "No it doesn't!" I'm sick of this, but he won't give up. So I'm done avoiding these yelling matches and becoming a sadist from now on. I would like some help in finding questions to ask him that force him to understand what he's doing. I'd like some help and any resources I can find. CQuestions looked like a good site, but now I need some iPhone stuff. For example: *What do properties do? How are they changed? How do you change the name of the getter? *Why are Booleans inefficent? What advantage does int have over a boolean and how does the bit-shift operator help? *What does Copy do to a string? *What's the difference between a view controller and a uiview? *Write a program from memory that displays blah on screen, and flashes each view one by one. From beginner up to intermediate, hobbyist with some algebra at most. I'm just looking for resources to work with. I left in backstory so you know to "twist" the questions so he doesn't know he's supposed to init a variable here or there, but has to figure it out, and learn why it goes "here" or that "anywhere is fine as long as it's". Sample programs, anything. I'm relatively open about this because, being a programmer, I seriously doubt he's the only one who has this issue. I'd like to know how others have overcome similar. What made things "click"? for you? Did you have a hard time finding answers on Google, and how did you learn a better way to find what you were looking for? (He's so exact, he'll search for how to write a checkers program with color X and Y inside a uiview, as his search string, instead of breaking it up into components, I need help with that too, and believe it is related). This type of problem has to remind one of us of someone they know. So, Exercises to force them to think? Ways we overcame this thing in the past? I greatly appreciate any help.

Read the article

HLSL 5 interpolation issues

- by metredigm

I'm having issues with the depth components of my shadowmapping shaders. The shadow map rendering shader is fine, and works very well. The world rendering shader is more problematic. The only value which seems to definitely be off is the pixel's position from the light's perspective, which I pass in parallel to the position. struct Pixel { float4 position : SV_Position; float4 light_pos : TEXCOORD2; float3 normal : NORMAL; float2 texcoord : TEXCOORD; }; The reason that I used the semantic 'TEXCOORD2' on the light's pixel position is because I believe that the problem lies with Direct3D's interpolation of values between shaders, and I started trying random semantics and also forcing linear and noperspective interpolations. In the world rendering shader, I observed in the pixel shader that the Z value of light_pos was always extremely close to, but less than the W value. This resulted in a depth result of 0.999 or similar for every pixel. Here is the vertex shader code : struct Vertex { float3 position : POSITION; float3 normal : NORMAL; float2 texcoord : TEXCOORD; }; struct Pixel { float4 position : SV_Position; float4 light_pos : TEXCOORD2; float3 normal : NORMAL; float2 texcoord : TEXCOORD; }; cbuffer Camera : register (b0) { matrix world; matrix view; matrix projection; }; cbuffer Light : register (b1) { matrix light_world; matrix light_view; matrix light_projection; }; Pixel RenderVertexShader(Vertex input) { Pixel output; output.position = mul(float4(input.position, 1.0f), world); output.position = mul(output.position, view); output.position = mul(output.position, projection); output.world_pos = mul(float4(input.position, 1.0f), world); output.world_pos = mul(output.world_pos, light_view); output.world_pos = mul(output.world_pos, light_projection); output.texcoord = input.texcoord; output.normal = input.normal; return output; } I suspect interpolation to be the culprit, as I used the camera matrices in place of the light matrices in the vertex shader, and had the same problem. The problem is evident as both of the same vectors were passed to a pixel from the VS, but only one of them showed a change in the PS. I have already thoroughly debugged the matrices' validity, the cbuffers' validity, and the multiplicative validity. I'm very stumped and have been trying to solve this for quite some time. Misc info : The light projection matrix and the camera projection matrix are the same, generated from D3DXMatrixPerspectiveFovLH(), with an FOV of 60.0f * 3.141f / 180.0f, a near clipping plane of 0.1f, and a far clipping plane of 1000.0f. Any ideas on what is happening? (This is a repost from my question on Stack Overflow)

Read the article

Fun tips with Analytics

- by user12620172

If you read this blog, I am assuming you are at least familiar with the Analytic functions in the ZFSSA. They are basically amazing, very powerful and deep. However, you may not be aware of some great, hidden functions inside the Analytic screen. Once you open a metric, the toolbar looks like this: Now, I’m not going over every tool, as we have done that before, and you can hover your mouse over them and they will tell you what they do. But…. Check this out. Open a metric (CPU Percent Utilization works fine), and click on the “Hour” button, which is the 2nd clock icon. That’s easy, you are now looking at the last hour of data. Now, hold down your ‘Shift’ key, and click it again. Now you are looking at 2 hours of data. Hold down Shift and click it again, and you are looking at 3 hours of data. Are you catching on yet? You can do this with not only the ‘Hour’ button, but also with the ‘Minute’, ‘Day’, ‘Week’, and the ‘Month’ buttons. Very cool. It also works with the ‘Show Minimum’ and ‘Show Maximum’ buttons, allowing you to go to the next iteration of either of those. One last button you can Shift-click is the handy ‘Drill’ button. This button usually drills down on one specific aspect of your metric. If you Shift-click it, it will display a “Rainbow Highlight” of the current metric. This works best if this metric has many ‘Range Average’ items in the left-hand window. Give it a shot. Also, one will sometimes click on a certain second of data in the graph, like this: In this case, I clicked 4:57 and 21 seconds, and the 'Range Average' on the left went away, and was replaced by the time stamp. It seems at this point to some people that you are now stuck, and can not get back to an average for the whole chart. However, you can actually click on the actual time stamp of "4:57:21" right above the chart. Even though your mouse does not change into the typical browser finger that most links look like, you can click it, and it will change your range back to the full metric. Another trick you may like is to save a certain view or look of a group of graphs. Most of you know you can save a worksheet, but did you know you could Sync them, Pause them, and then Save it? This will save the paused state, allowing you to view it forever the way you see it now. Heatmaps. Heatmaps are cool, and look like this: Some metrics use them and some don't. If you have one, and wish to zoom it vertically, try this. Open a heatmap metric like my example above (I believe every metric that deals with latency will show as a heatmap). Select one or two of the ranges on the left. Click the "Change Outlier Elimination" button. Click it again and check out what it does. Enjoy. Perhaps my next blog entry will be the best Analytic metrics to keep your eyes on, and how you can use the Alerts feature to watch them for you. Steve

Search Results

Search found 23609 results on 945 pages for 'view criteria'.

Page 447/945 | < Previous Page | 443 444 445 446 447 448 449 450 451 452 453 454 | Next Page >

- by rajbk

- by subodhnpushpak

- by Roger Ford

- by Adam Henderson

- by Mark Rackley

- by Jay Zuckert

- by Melissa Centurio Lopes

- by Asian Angel

- by Pinetree

- by Michael M. Bangoy

- by Herve Roggero

- by DigitalGeekery

- by volker.eckardt(at)oracle.com

- by Lasse

- by Joe Diemer

- by T

- by Chuchinyi

- by Sanjeev Sharma

- by Vodácek

- by cibrax

- by Callum

- by Mike.Hallett(at)Oracle-BI&EPM

- by Stephen J

- by metredigm

- by user12620172

< Previous Page | 443 444 445 446 447 448 449 450 451 452 453 454 | Next Page >