Search Results

Search found 15208 results on 609 pages for 'andys crazy questions'.

Page 448/609 | < Previous Page | 444 445 446 447 448 449 450 451 452 453 454 455  | Next Page >

  • SSD, AHCI and write performance

    - by Dan
    We've started to deploy SSD drives to our developers workstations. At this moment we're having the unpleasant surprise that the systems using the new SSDs often freeze, with the HDD activity led blinking or being continuously on. Benchmarks shows read speeds around 180 MB/s, but write speeds around 5 MB/s. All developers are using Windows 7 Enterprise, 64 bit, SP1. One of our developers suggested (based on his experience) the following sequence: backup the workstation use a tool to completely erase the SSD make sure AHCI is enabled in BIOS install Windows restore from backup So far, this procedure seems to work (we're still testing, but write speed seems to be 120 MB/s). There are some questions in this context: why do we have to completely reinstall Windows? Is it possible to clean the SSD without reinstalling Windows? Is there a reliable tool? If AHCI was disabled when Windows was installed and we enable it, shouldn't this be enough to correct the write performance issue? If we have to completely erase the SSDs, does this mean the SSDs we've received were used before (SH)? I'm wondering this because the package I've got was open (I didn't think about it at that time, as I considered one of my coworkers simply took a peek inside the package). Has anyone seen a similar problem before?

    Read the article

  • Which linux distributions offer seamless support for UEFI and an LVM root out of the box?

    - by Jannik Jochem
    My new ultrabook (an Asus UX32VD) requires UEFI in order to boot from the internal harddisk. I use an LVM partition which contains my root fs and dual-boot Windows 8. I somehow managed to get this working on Sabayon Linux, however the overall process was pretty painful, and system upgrades keep breaking my configuration because everything depends on a hand-configured kernel and a hand-crafted GRUB2 configuration. This causes a lot of hassle and distractions for me, so I am considering to switch to a different distribution. However, I cannot find any concrete resources that precisely document the state of UEFI support in the popular distributions. As an example, the length of the Ubuntu wiki page on UEFI suggests that installing on UEFI systems is a non-trivial process, and this AskUbuntu thread on encrypted LVM on UEFI systems suggests that LVM might also be a problem. I know that this question seems somewhat open-ended, so I'll formulate concrete questions: Are there any Linux distributions with an installer that supports installing to an LVM root in a UEFI boot setting where Windows 8 is dual-booted? Which distributions support UEFI without having to jump through hoops in order to bootstrap into a UEFI-booted system or requiring manual configuration of the boot manager?

    Read the article

  • New XPC: No video, no ethernet link, but drive spins

    - by Mike Pennington
    I bought a Shuttle XPC SH67H3 with integrated video. I installed: An Intel i5 2450P 16GB DDR3 RAM A SATA hard drive from my old linux server that still is bootable I have both power connectors plugged into the motherboard. I realize that the Intel i5-2450P doesn't have video capabilities; however, the drive spins like it's doing something useful. It seems like I should get an ethernet link light when I fire this up. I plan to run this headless anyway, so it would be really nice if I could figure out how to run this without a video card at all. I know the IP address and login info for the linux install on the disk. I plugged in speakers, but get no bios beeps when I power it up. Shuttle's bios manual has nothing in there that indicates I should have problems in this configuration. My questions: Is there a reason that the missing video card would block usage of the ethernet port? Are there settings on the motherboard / bios I can change to get this working?

    Read the article

  • Howto: SaaS / PHP Application / Tenants / Security

    - by Ben Fransen
    Hi all, Being completely new in the webhostingcorner I have a few questions on how to implement/setup a webserver for a SaaS application. I'm about to rent my own server for a new product (CMS) I'm launching in two months. Developing the system wasn't that much of wild ride to me, but a correct way to implement it, is. So lets say this is my situation: I want to host 10 websites for 8 clients. There are 6 single sites, and two clients have two websites they can manage with my software. The CMS must be placed on the server too, all clients are connecting to 1 system The database must be placed Depending on the contract a client makes, the client gets some storage. How to measure the used storage over the DB, FileSystem and email Clients may not, in any case be able to somehow get outside their directory, but from the CMS directory the CMS must be able to create files and dirs in a clients directory (for templates, imagegalleries, widgets, etc, etc). I was thinking about something like a dirstructure like this: ./CMS/ [all CMS files] ./Websites/*/ [all websites] My hostingprovider will install updates to the os (CentOS, latest) and the admin panel (Direct Admin). Is there anybody with experience on this topic? Or do you have some thoughts about it? please join the conversation since I'm completely new to this. Ben

    Read the article

  • Http-Only cookies in WebLogic: what versions support them/how and why are they supported?

    - by John
    We want to make all cookies set by our webapp http-only. I only have a basic understanding of the benefits of doing this but I'm told by security people that it's a Good Thing (tm) Our app is running under JDK1.6.05 and WebLogic10.3.0 After way too much digging around Oracle's website for documentation, I've found good evidence that the first version of WebLogic to support http-only cookies is 10.3.1. By "support," I mean the cookie-http-only deployment-descriptor element. Before we go about upgrading, I'd be nice to have these questions answered: 1a) Is it accurate that WL10.3.1 is the first version to support http-only cookies and that we're out of luck with 10.3.0? 1b) If we do indeed need to upgrade, is there an easy to do so under Windows? I've heard people mention an "upgrade jar" that you just stick in the classpath but I can't find any mention of this by Oracle. Does an easy way exist, or do we need to do a full-install of the new version? 2) What does the cookie-http-only deployment-descriptor element do when enabled? Will it ensure all cookies set by the application have an http-only=true attribute? Will it do more or less? Is there anything I'll have to do programmatically? 3) Is there anything in general I should know about http-only cookies, getting my web app to take advantage of them, or other security concerns?

    Read the article

  • Network share not always available on Windows 2003

    - by JP Hellemons
    Hello everybody, we have a windows 2003 server with a shared directory/folder. I've seen this thread but this wasn't any help: http://superuser.com/questions/58890/the-specified-network-name-is-no-longer-available I have a ping -t running from 3 pc's (vista and two windows 7) they all work. the problem occurss when two users enter the network share then this 'network share is no longer available' appears and the explorer windows turn white. after f5 or refresh the shared directory is back. this is really strange. there is no anti virus or kasparsky running on either end. this is all in the same LAN. the internet connection is really stable, so it's really strange. because a stable internet connection should imply that the local network connection is also stable and that this is a windows issue. can it be a router issue? I have checked the eventlog on the server for diskfailure related messages, but there are none. EDIT: can this be related to mapping a shared directory to a drive letter? and that there is a router between me and the mapped network drive? or is it just windows that is not working well with two users on the same shared folder? should I install samba or something?

    Read the article

  • Question for Vim search and peck typists

    - by mike
    I'm trying to write a Vim tutorial and I'd like to start by dismissing a few misconceptions, as well as giving some recommendations. I don't know if I should dismiss touch-typing as a misconception, or include it as a recommended prerequisite. At the time I learned the editor, I had already been touch typing for a couple of years, so I have absolutely no idea what would be the experience of a two-fingered typist in Vim. Are you a vim two-fingered typist? what has your experience been like? EDIT: I'm not sure if my question was clear enough. Maybe it's my fault, I don't know. I get mixed replies and other questions (why do you write this? what does one have to do with the other?), instead of empirical info (I don't touch type and it's been (fine|hell)). Some programmers touch-type others search and peck. In the middle, there's Vim which requires a certain affinity with keys to do various operations. I am a touch typist and I have no clue what my experience would have been like with the editor if I wasn't. I can't honestly picture myself pecking some of these combos. But like I said, I don't know what it is like. Before telling someone to start using Vim, I'd like to know if I should dismiss touch-typing as a misconceived requirement. So, I'll rephrase the question, have you felt that not being a touch-typist has impeded on your experience with Vim?

    Read the article

  • My Western Digital 500GB Passport disk says "not formatted" when I plug it in Windows

    - by learnerforever
    Hi, When I plug my Western Digital 500 GB Passport disk in my Windows machine, it says "not formatted, do you want to format it" something. I started having this problem after I put it in an old desktop at home. I don't exactly know what went wrong. May be partition table is corrupted etc. Questions: Some quick search on internet tells me there are partition fixing utilities, which can fix corrupted partition table. testdisk being one of such utiities. I can understand how to use this to copy files from the disk to some other location, but I would like to fix the partition table in-place so that I don't have to temporary move around my data of approx size 300GB, then format passport disk and then again bring back the data. Is there any way I can fix the partition table in-place? Also, how to know which file system was there originally in the disk? Can I only keep the same file system? My current laptop is running Windows 7. Earlier I used to use Windows Vista. My other laptop has Windows XP. So I have access to Windows 7 and Windows XP. Please help! Thanks,

    Read the article

  • Virtualmin & git integration

    - by weby3456
    I've installed virtualmin on my VPS to manage my websites. It's working perfect and as expected nearly a year now. Recently I wanted to add some features to one of my sites, and I need git integration. I've correctly installed git & gitweb on my server, and I can create repositories and watch them under http://sub.domain.com/git/gitweb.cgi Here is the current relevant directory tree: /home/user/domains/sub.domain.com/public_html/git/ drwxr-sr-x user user . drwxr-x--- user user .. -rw-r--r-- user user git-favicon.png -rw-r--r-- user user git-logo.png -rwxr-xr-x user user gitweb.cgi -rw-r--r-- user user gitweb.css drwxrwx--- apache user reponame.git /home/user/domains/sub.domain.com/public_html/git/reponame.git/ drwxrwx--- apache user . drwxr-sr-x user user .. drwxrwx--- apache user branches -rwxrwx--- apache user config -rwxrwx--- user user description -rwxrwx--- apache user HEAD drwxrwx--- apache user hooks drwxrwx--- apache user info drwxrwx--- apache user objects drwxrwx--- apache user refs But I have some questions: When I'm visiting http://sub.domain.com/git/gitweb.cgi, the owner is listed as 'Apache'. why? how can I change that? Usually, to create a new git repository, I'll do something like: $ mkdir proj $ cd proj $ git init Initialized empty Git repository in /home/user/proj/.git/ // here I'm creating the files or copy them from somewhere else $ git add *.php $ git add README $ git commit -m 'initial version' But after creating the repository in virtualmin, I can find a new dir named 'reponame.git' but not the '.git' dir. When I'm trying to run any git command (e.g. git status) I'm receiving "fatal: This operation must be run in a work tree". How can I work with that repository? Currently I need to explicitly grant access for users to be able to view the repositories via gitweb. How can I make certain repositories public?

    Read the article

  • Temporary boot problem after thunder storm - likely causes?

    - by alastairs
    The village where I live was sat under a thunder cloud for most of Friday, and we suffered a few power fluctuations (specifically, what seemed to be split-second outages). When I got back home from work, I found that my PCs had shut down during one of these outages. When I went to boot one of them back up, I couldn't get anything to display on screen, nor did the boot seem to complete correctly. I tried a number of things - unplugging different bits of hardware, swapping graphics adaptors, etc. - to no avail. I thought I was looking at a fried motherboard or CPU. Power seemed to be distributed correctly to the peripherals (the drives all appeared to be working) so I figured it couldn't be the PSU. Eventually I unplugged it from the mains and left it overnight (approx 12hrs unplugged). I tried it again this morning, and it booted up correctly. Woo-hoo! I have all my equipment protected by surge-protected power strips, so I don't think a spike caused these problems. Obviously it has something to do with the power fluctuations, and maybe the PSU in the problem machine got itself confused somehow. The questions are, for future reference and to help people with similar problems: What are the likely causes of the boot failure I experienced? Is a UPS a simple and cost-effective solution, or might other things help prevent this happening in future? What UPS can you recommend (my budget is limited)?

    Read the article

  • RemoteApp .rdp embed creds?

    - by Chris_K
    Windows 2008 R2 server running Remote Desktop Services (what we used to call Terminal Services back in the olden days). This server is the entry point into a hosted application -- you could call it Software as a Service I suppose. We have 3rd party clients connecting to use it. Using RemoteApp Manager to build RemoteApp .rdp shortcuts to distribute to client workstations. These workstations are not in the same domain as the RDS server. There is no trust relationship between domains (nor will there be). There is a tightly controlled site to site VPN between workstations and the RDS server, we're quite confident we have access to the server locked down. The remoteApp being run is an ERP application with its own authentication scheme. The issue? I'm trying to avoid the need to create AD logins for every end user when connecting to the RemoteApp server. In fact, since we're doing a remoteApp and they have to authenticate to that app, I'd rather just not prompt them at all for AD creds. I certainly don't want them caught up in managing AD passwords (and periodic expirations) for accounts they only use to get to their ERP login. However, I can't figure out how to embed AD creds in a RemoteApp .rdp file. I don't really want to turn off all authentication on the RDS server at that level. Any good options? My goal is to make this as seamless as possible for the end-users. Clarifying questions are welcome.

    Read the article

  • Problems using Mesa demos

    - by Rodnower
    Hello, I successfully installed Mesa with "yum install Mesa*" and downloaded MesaDemos-7.8.tar.gz archive. Now I try follow instructions from "Mesa3d.org - Download / Insall - Compiling and Installing - 1.5 Running the demos", but in progs/demos there is only *.c files, when I try to compile them, I get many similar errors like: gears.c:(.text+0x54): undefined reference to `glShadeModel' I guess that this is very noob question, and I understand that there is very simple solution, but I haven't any idea... In beggining of the file there are all necessary #includes: #include <math.h> #include <stdlib.h> #include <stdio.h> #include <string.h> #include <GL/glut.h> So I have some questions: Is there some Mesa forum on the web? Is there some compiled demos? Is there some site with well described examples of Mesa using? What I need for compile those examples? I have CentOS 5 Thank you for ahead.

    Read the article

  • Which database to use and system/db administration by layman [closed]

    - by blah
    So my friend and I got briliant ;) idea for a business. Since it is not predictable whether it will work out or not, we decided to keep cost as low as possible to start with, in particular not to hire anyone. If it will work out as expected it will generate enough profit to hire professionals in few months. But for the first few months we'll be doing everything by ourselfs. He's a business/finance major, and I'm a software developer, so obviously I have to take care of IT :) It will be a webapp, written in python/django. My questions regarding this project: 1) What database should I choose? I'm experienced with oracle, and have been working with SQL Server for a while, but both of them are too expensive(at least now). It's a developer experience, I've never done any dba stuff. I'm looking for something free(as in beer). Looks like MySql or PostgreSQL are most popular in this sector. I would appreciate any comments on which db to choose. I'm open to any suggestions(it doesn't have to be MySql or Postgre). Here's what I know about data: It will be almost dates and numbers, a little bit of text. Searched mainly by dates. Data will almost never be updated, mostly inserted and browsed. From 30k to 300k new records/month. 2) Servers. My idea is to rent two dedicated servers. During normal operation one would be a web server(debian/apache), other would be a db server(debian/?). My recovery plan is to install everything on both, and in case of trouble with one of machines just run everything on the other one. Does it even makes sense? Any other tips appreciated. Thanks.

    Read the article

  • Are SATA II and SATA 3.0 Gbps compatible?

    - by Johnny Maelstrom
    I am trying to check that if I buy a new internal HDD it will work in the NAS I am buying. Currently I'm confused about naming schemes and once that is resolved whether there is compatibility. I will gladly author this question to be more general if there is not already an article helping with the confusion of SATA naming and standards. I see similar, but not identical questions and will accept this as a duplicate if thought as such. The specifications on the eCommerce site for the NAS says, "Controller Interface Type Serial ATA-150", the product home page for the manufacturer says, "Compatible with SATA and SATA II HDD". The specifications on the eCommerce site for the hard drives say, "Interface Type Serial ATA-300", the product home page for the manufacturer says, "Interface SATA 3.0 Gbps" Wikipedia says many things about different naming conventions, the closest being, "SATA II 3.0 Gbit/s, which was colloquially referred to as "SATA 3G" [bps] or "SATA 300" [MB/s] since 1.5 Gbit/s SATA I and 1.5 Gbit/s SATA II were referred to as both "SATA 1.5G" [b/s] or "SATA 150" [MB/s]). Therefore, they will operate with negligible differences between them." Are SATA II and SATA 3.0 Gbps the same? I feel I'm tantalisingly close to getting a definitive answer here before I purchase, but really want to clear up these naming schemes.

    Read the article

  • Identifying and Resolving Oracle ITL Deadlock

    - by Allan
    I have an Oracle DB package that is routinely causing what I believe is an ITL (Interested Transaction List) deadlock. The relevant portion of a trace file is below. Deadlock graph: ---------Blocker(s)-------- ---------Waiter(s)--------- Resource Name process session holds waits process session holds waits TM-0000cb52-00000000 22 131 S 23 143 SS TM-0000ceec-00000000 23 143 SX 32 138 SX SSX TM-0000cb52-00000000 30 138 SX 22 131 S session 131: DID 0001-0016-00000D1C session 143: DID 0001-0017-000055D5 session 143: DID 0001-0017-000055D5 session 138: DID 0001-001E-000067A0 session 138: DID 0001-001E-000067A0 session 131: DID 0001-0016-00000D1C Rows waited on: Session 143: no row Session 138: no row Session 131: no row There are no bit-map indexes on this table, so that's not the cause. As far as I can tell, the lack of "Rows waited on" plus the "S" in the Waiter waits column likely indicates that this is an ITL deadlock. Also, the table is written to quite often (roughly 8 insert or updates concurrently, as often as 240 times a minute), so and ITL deadlock seems like a strong possibility. I've increased the INITRANS parameter of the table and it's indexes to 100 and increased the PCT_FREE on the table from 10 to 20 (then rebuilt the indexes), but the deadlocks are still occurring. The deadlock seems to happen most often during an update, but that could just be a coincidence, as I've only traced it a couple of times. My questions are two-fold: 1) Is this actually an ITL deadlock? 2) If it is an ITL deadlock, what else can be done to avoid it? Cross-posted from Stack Overflow. Deadlocks are normally a programming problem, but ITL deadlocks relate directly to how Oracle writes to disk, so this may be an area where DBAs have more experience.

    Read the article

  • cPanel web servers mounting home partition to a NAS or SAN

    - by Scott
    I currently have 2 cPanel web servers that are little 1RU dual cpu quad core xeons. They have a lot of resources for processing and handling web requests, and never exceed more than 10% cpu usage. They also have plenty of RAM. The problem is though that they both have RAID 1 160Gb SAS hard disk drives in them that are 75% full, and growing by the day. I didnt think that the amount of disk usage would be so high, but due to the nature of the sites hosted, this has become an issue. The easy fix would be just to upgrade the hard drives to something bigger (probably not of the SAS variety), but I am thinking of keeping the current machines as "processing servers" and buying a central "storage server" with about 12TB of storage. The /home/ partition on each of the 1RU servers would be mounted to a NAS or SAN point on this central storage server. My questions are: - Has anyone got a cPanel setup where they mount /home/ to a NAS or SAN elsewhere? If so, can you provide details as to what you did and how it went :) - Any recommendations on networking? Is gigabit ethernet enough? Is TCP/IP going to be a noticable performance problem? Anyone used a TOE key? - Anyone benchmarked or had any performance issues with SAN over NAS? Any help greatly appreciated. Scott

    Read the article

  • Virtual Lan on the Cloud -- Help Confirm my understanding?

    - by marfarma
    [Note: Tried to post this over at ServerFault, but I don't have enough 'points' for more than one link. Powers that be, move this question over there.] Please give this a quick read and let me know if I'm missing something before I start trying to make this work. I'm not a systems admin professional, and I'd hate to end up banging my head into the wall if I can avoid it. Goals: Create a 'road-warrior' capable star shaped virtual LAN for consultants who spend the majority of their time on client sites, and who's firm has no physical network or servers. Enable CIFS access to a cloud-server based installation of Alfresco Allow Eventual implementation of some form of single-sign-on ( OpenLDAP server ) access to Alfresco and other server applications implemented in the future Given: All Servers will live in the public internet cloud (Rackspace Cloud Servers) OpenVPN Server will be a Linux disto, probably Ubuntu 9.x, installed on same server as Alfresco (at least to start) Staff will access server applications and resources from client sites, hotels, trains, planes, coffee shops or their homes over various ISP, using their company laptops or personal home desktops. Based on my Research thus far, to accomplish this, I'll need: OpenVPN with Bridging Enabled to create a star shaped "virtual" LAN http://openvpn.net/index.php/open-source/documentation/miscellaneous/76-ethernet-bridging.html A Road Warrior Network Configuration, as described in this Shorewall article (lower down the page) http://www.shorewall.net/OPENVPN.html Configure bridge addressesing (probably DHCP) http://openvpn.net/index.php/open-source/faq.html#bridge-addressing Configure CIFS / Samba to accept VPN IP address http://serverfault.com/questions/137933/howto-access-samba-share-over-vpn-tunnel Set up Client software, with keys configured for access (potentially through a OpenVPN-Sa client portal) http://www.openvpn.net/index.php/access-server/download-openvpn-as/221-installation-overview.html

    Read the article

  • Copying email with qmail and Plesk

    - by Greg
    I need to keep a copy of all outgoing and incoming email (for a single domain if possible) using qmail or Plesk. I can't recompile qmail, so qmailtap is out of the question, as is setting QUEUE_EXTRA in extra.h. I'm pretty sure it should be possible with Plesk's mailmng utility, aka Mail Handlers but I'm having trouble getting them to work. I've registered 2 hooks: incoming hook ./mailmng --add-handler --handler-name=incoming --recipient-domain=example.com --executable=/xxx/incoming.sh --context=/xxx/incoming/ --hook=before-local incoming.sh #!/bin/bash # The email is passed on stdin - grab it to a variable e=`cat -` # $1 = context (/xxx/incoming) # $3 = recipient ([email protected]) # Create /xxx/incoming/[email protected] mkdir -p $1$3 # Save the email to /xxx/incoming/[email protected]/0123456789.txt echo "$e" > $1$3/`date +%s%N`.txt # Echo PASS to stderr echo 'PASS' >&2 # Echo the email to stdout echo "$e" outgoing hook # ./mailmng --add-handler --handler-name=outgoing --sender-domain=holidaysplease.com --executable=/xxx/outgoing.sh --context=/xxx/outgoing/ --hook=before-remote The outgoing.sh file is the same as incoming.sh, except replace $3 (recipient) with $2 (sender). The incoming hook does work, but saves 2 copies of each email - one before and one after SpamAssassin has run. The outgoing hook doesn't seem to get called at all. So finally, my questions are: How can I make the incoming hook save only a single copy (preferably after SpamAssassin has run)? How can I get the outgoing hook to work?

    Read the article

  • Secondary backup server

    - by verdy
    I've been given a task to implement a backup solution in the event of our website goes down. It is a dedicated server running centos 6. From what i've experience on our server, our server may go down because of PHP application crash or hardware failure. I have couple of questions: In the first case, is it possible to get the server restart the PHP automatically, how can I do that? Because in my mind, if it is only the application that goes down, probably I can still make use of the server itself. In the second case, can I redirect a request to a secondary server? How can I do that? What do I need other than another server? For now it is gonna be a simple server which shows the user a static landing page so later the system notify us via email that the primary server went down so that we can restart the server manually. Is it possible to setup just a vps or even a shared server for the secondary server ? As I think there is only gonna be a static page. Thanks. Any help would be much appreciated

    Read the article

  • Error loading operating system: format Windows 7 to Windows XP Service Pack 3

    - by Blerta
    I saw that there are other questions like mine here. But O also saw that some problems where solved with fixmbr from a Windows 7 recovery console, but that didn't work for me. I bought my laptop with Vista installed and later reformated and used Windows 7. During formatting with Windows 7 I had some problems with my hard drive and found out it was dead so I bought a new one. I wanted to reformat with Windows XP,because Windows 7 is consuming more RAM that it is able handle and I wanted to use it for other programs. So I formatted with Windows XP Service Pack 3 but after first reboot a message appeared: "Error loading operating system" Reading here, I assumed that maybe I had installed it on the wrong partition and maybe having two OS now, so I used fixmbr but it is still not starting up. Anyway I am sure that is not the case of two operating systems. Is there any chance that when the computer designed to work with Vista you would face problems with Windows XP? Like not recognizing a hard drive?

    Read the article

  • Using ZFS or XFS on a Xen guest running Linux

    - by zoot
    Background: I'm investigating the viability of using a filesystem other than ext3/4, with the ability to run snapshots for backup and rollback purposes. The servers under consideration are mailbox server nodes running on Linode's Xen based VPS platform. I'm particularly drawn to the various published benefits which ZFS offers in terms of data integrity and this year's stable release of native ZFS support in Linux - http://zfsonlinux.org ZFS appears to be the more thorough option in terms of benefits and simplicity (instead of LVM+XFS). Please note that I have little experience with ZFS (which I use on a local FreeNAS installation) and none with XFS, hence the post. To date, my servers are using ext3 filesystems, not managed under LVM. Question in detail: So, I have two questions. (1) Which of the two filesystems would be the better choice for the best of all of the following 3 aspects, running on a Xen Linux guest? Snapshots Data Integrity Performance (2) If ZFS is a viable option, is it practical to use ZRAID across Xen disk images to further enhance the solution for data integrity? Note: I'm reluctant to consider btrfs, given the many warnings I've read about in using it on production systems.

    Read the article

  • GnuPG Command Line - Verifying KeePass Signature

    - by Stisfa
    I'm trying to verify the PGP Signature of the latest version of KeePass 2.14's setup file against this signature, but this is the output I receive: C:\Program Files (x86)\GNU\GnuPG>gpg.exe --verify C:\Users\User\Desktop\KeePass-2.14-Setup.exe gpg: no valid OpenPGP data found. gpg: the signature could not be verified. Please remember that the signature file (.sig or .asc) should be the first file given on the command line. C:\Program Files (x86)\GNU\GnuPG> I found this command here, but it made no mention about ".sig" or ".asc" files, so I figured I did something wrong. By reading (http://www.gnupg.org/documentation/manuals/gnupg/gpgv.html#gpgv), I further tried the following: C:\Program Files (x86)\GNU\GnuPG>gpg.exe --pgpfile C:\Users\User\Desktop\KeePass-2.14-Setup.exe gpg: Invalid option "--pgpfile" C:\Program Files (x86)\GNU\GnuPG> As you can see, the results are quite obfuscating... I took a look at this on SuperUser (http://superuser.com/questions/16160/short-easy-to-understand-explanation-of-gpg-pgp-for-nontechnical-people - I couldn't use "a href" due to the built in spam filter that discriminates against users with < 10 rep; this is the same reason for the link above this link), but none of the links seemed to really address my question, at least not directly enough for me to get any idea on how to move forward on this. Can anybody here help me with the esoteric technicality of OpenPGP & the associated use of the GnuPG program? I've felt pretty dumb learning VBS, but this is beyond humiliating: it's absolutely debilitating and maiming whatever confidence I had with my IT skills (then again, I have no justification for making any boast either, as I have yet to get my A+ Cert, lol).

    Read the article

  • SQL Server transaction log backups,

    - by krimerd
    Hi there, I have a question regarding the transaction log backups in sql server 2008. I am currently taking full backups once a week (Sunday) and transaction log backups daily. I put full backup in folder1 on Sunday and then on Monday I also put the 1st transaction log backup in the same folder. On tuesday, before I take the 2nd transaction log backup I move the first transaction log backup from folder1 an put it into folder2 and then I take the 2nd transaction log backup and put it in the folder1. Same thing on Wed, Thurs and so on. Basicaly in folder1 I always have the latest full backup and the latest transaction log backup while the other transaction log backups are in folder2. My questions is, when sql server is about to take, lets say 4th (Thursday) transaction log backup, does it look for the previous transac log backups (1st, 2nd, and 3rd) so that this new backup will only include the transactions from the last backup or it has some other way of knowing whether there are other transac log backups. Basically, I am asking this because all my transaction log backups seem to be about the same size and I thought that their size will depend on the amount of transactions since the last transaction log backup. Can anyone please explain if my assumptions are right? Thanks...

    Read the article

  • Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host.

    - by Paul J. Warner
    I am having an issue with a program where after 6 mins +- 5 secs we get the above exception. Some more info about the exception stacktrace is below. This all happens pretty religiously, 6 mins goes by and bam the following 3 exeptions. We have the application installed in 2 other environments and it is working fine there. I am hoping to find some server settings either IIS 6 or Server 2003 settings that may be causing this issue to occur. I have reviewed some of the similar questions and don't see very many answers. I am hoping that maybe the information I have provided may help a little bit. 208741,Exception,,,,2011-06-21 00:30:14.193,SERVERNAME,2624,1,CLIENTNAME,The underlying connection was closed: An unexpected error occurred on a receive. , at System.Web.Services.Protocols.WebClientProtocol.GetWebResponse(WebRequest request) at System.Web.Services.Protocols.HttpWebClientProtocol.GetWebResponse(WebRequest request) at Microsoft.Web.Services3.WebServicesClientProtocol.GetResponse(WebRequest request, IAsyncResult result) at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters) at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size) at System.Net.FixedSizeReader.ReadPacket(Byte[] buffer, Int32 offset, Int32 count) at System.Net.Security._SslStream.StartFrameHeader(Byte[] buffer, Int32 offset, Int32 count, AsyncProtocolRequest asyncRequest) at System.Net.Security._SslStream.StartReading(Byte[] buffer, Int32 offset, Int32 count, AsyncProtocolRequest asyncRequest) at System.Net.Security._SslStream.ProcessRead(Byte[] buffer, Int32 offset, Int32 count, AsyncProtocolRequest asyncRequest) at System.Net.TlsStream.Read(Byte[] buffer, Int32 offset, Int32 size) at System.Net.PooledStream.Read(Byte[] buffer, Int32 offset, Int32 size) at System.Net.Connection.SyncRead(HttpWebRequest request, Boolean userRetrievedStream, Boolean probeRead),2004437127,114,1 208742,Exception,,,,2011-06-21 00:30:14.227,SERVERNAME,2624,1,CLIENTNAME,Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host. , at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size) at System.Net.FixedSizeReader.ReadPacket(Byte[] buffer, Int32 offset, Int32 count) at System.Net.Security._SslStream.StartFrameHeader(Byte[] buffer, Int32 offset, Int32 count, AsyncProtocolRequest asyncRequest) at System.Net.Security._SslStream.StartReading(Byte[] buffer, Int32 offset, Int32 count, AsyncProtocolRequest asyncRequest) at System.Net.Security._SslStream.ProcessRead(Byte[] buffer, Int32 offset, Int32 count, AsyncProtocolRequest asyncRequest) at System.Net.TlsStream.Read(Byte[] buffer, Int32 offset, Int32 size) at System.Net.PooledStream.Read(Byte[] buffer, Int32 offset, Int32 size) at System.Net.Connection.SyncRead(HttpWebRequest request, Boolean userRetrievedStream, Boolean probeRead),2004437127,114,1 208743,Exception,,,,2011-06-21 00:30:14.287,SERVERNAME,2624,1,CLIENTNAME,An existing connection was forcibly closed by the remote host , at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size),-691097507,62,1

    Read the article

  • DNS zone file SPF configuration to support sending mail from multiple servers and gmail

    - by Tauren
    I want to configure SPF on a domain to allow mail to be sent from: the x.com website server (x.com and www.x.com - both at same IP) it's MX servers (smtp.x.com, mx.x.com, mail.x.com) another server that isn't listed as an MX server (somehost.x.com) via gmail using an account that has authenticated use of [email protected] Will this zone file work? If not, what are the problems with it? $ttl 38400 @ IN SOA ns1.x.com. hostmaster.x.com. ( 201003092 ; serial 8H ; refresh 15M ; retry 1W ; expire 1H ) ; minimum @ NS ns1.x.com. @ NS ns2.x.com. @ MX 10 mx.x.com. @ MX 20 smtp.x.com. @ MX 30 mailhost.x.com. ; SPF records @ IN TXT "v=spf1 a mx a:somehost.x.com include:_spf.google.com ~all" mx IN TXT "v=spf1 a -all" smtp IN TXT "v=spf1 a -all" mailhost IN TXT "v=spf1 a -all" Questions: Is _spf.google.com the right thing to include for gmail.com, or is it only for Google Hosted Apps? If only for Google Apps, what should I include to send from gmail.com? If mail shouldn't be sent from anywhere else, is it safe to use -all instead of ~all? Does it make sense to add specific SPF records for each of the mail servers? Any other problems with the zone file? I want to confirm these things before making changes to my zone file. The file has SPF configured basically the same now, just without google.com and somehost, but I want to make sure I won't break things when I change it.

    Read the article

< Previous Page | 444 445 446 447 448 449 450 451 452 453 454 455  | Next Page >