Search Results

Search found 15209 results on 609 pages for 'configuration'.

Page 448/609 | < Previous Page | 444 445 446 447 448 449 450 451 452 453 454 455  | Next Page >

• Samba fails to install

  - by jschoen

  I am running XBMC, which is built around Ubuntu 10.04. It does not come with samba pre-installed, and I need to share some media with a couple other boxes. I followed the Think Geek directions found here. I had it all set up a couple days ago, and thought I was in the clear. I rebooted this evening and when it came back up Samba was not started. I determined this by trying access the samba shares, and it would return there was an connecting to the server. I can ssh into it, so I know it is connected. In my inifinite wisdom, I figured I just messed something up and would just uninstall and reinstall. So I did: sudo apt-get purge samba and sudo apt-get purge smbfs. Then tried to follow the tutorial above again. The what I get after running sudo apt-get install samba smbfs is Reading package lists... Done Building dependency tree Reading state information... Done Suggested packages: openbsd-inetd inet-superserver smbldap-tools ldb-tools ufw smbclient The following NEW packages will be installed: samba smbfs 0 upgraded, 2 newly installed, 0 to remove and 5 not upgraded. Need to get 0B/8,131kB of archives. After this operation, 22.6MB of additional disk space will be used. Preconfiguring packages ... Selecting previously deselected package samba. (Reading database ... 57098 files and directories currently installed.) Unpacking samba (from .../samba_2%3a3.4.7~dfsg-1ubuntu3.2_i386.deb)... Selecting previously deselected package smbfs. Unpacking smbfs (from .../smbfs_2%3a3.4.7~dfsg-1ubuntu3.2_i386.deb) ... Processing triggers for ureadahead ... Setting up samba (2:3.4.7~dfsg-1ubuntu3.2) ... Generating /etc/default/samba... update-alternatives: using /usr/bin/smbstatus.samba3 to provide /usr/bin/smbstatus (smbstatus) in auto mode. smbd start/running, process 2963 **start: Job failed to start** Setting up smbfs (2:3.4.7~dfsg-1ubuntu3.2) ... The bold is my own emphasis. So I am not sure what I messed up here, or how to get back to where it was. Though I am pretty sure I made it worse than it is. I found where the logs are located, /var/logs, and found this line that seems to be the culprit. Jan 29 11:59:34 XBMCLive smbd[2806]: error opening config file So it seems to not create the configuration files. Is there a way to get samba to try to recreate them again?

  Read the article

• Tomcat Manager Application and HTTP 404 Error

  - by David

  I am trying to set up the admin application for a Tomcat 6.0.24 instance. None of the searches I've done turn up anything I can use. I am using this configuration for Apache 2.2.14: Alias /manager /usr/share/tomcat6-admin/manager <Directory "/usr/share/tomcat6-admin/manager"> Options Indexes FollowSymLinks AllowOverride None allow from all </Directory> ProxyPass /manager ajp://localhost:8009/manager In the tomcat-users.xml I have this: <tomcat-users> <role rolename="tomcat"/> <role rolename="admin"/> <role rolename="operator"/> <role rolename="manager"/> <user username="admin" password="nopasswordforyou" roles="admin,tomcat,manager"/> <user username="operator" password="nevermind" roles="operator"/> </tomcat-users> I found the docs that suggested I needed manager-gui role installed and defined, but that appears to be Tomcat 7, not Tomcat 6. The manager.xml is the default provided with Ubuntu Lucid Lynx 10.04: <Context path="/manager" docBase="/usr/share/tomcat6-admin/manager" antiResourceLocking="false" privileged="true" /> If I access /manager from a web browser, I get a 404 error from Tomcat: "requested resource not available." If I access /manager/images I get the same thing. If I access /manager/401.jsp I get the actual page. In addition, the server.xml has not only the usual Realm (UserDatabaseRealm) but also one for MySQL authentication (JDBCRealm). Investigating this showed that the role of manager was not present there for the user admin; I fixed that by doing: INSERT USER_ROLE_DB SET USER_NAME='admin', ROLE_NAME='manager'; I restarted Tomcat, although I suspect that was overkill. No change. I don't see any errors in catalina.out or in localhost.* log files. What am I missing? What is the interaction between the different realms? How do I get the manager application working?

  Read the article

• Mixing Forms and Token Authentication in a single ASP.NET Application

  - by Your DisplayName here!

  I recently had the task to find out how to mix ASP.NET Forms Authentication with WIF’s WS-Federation. The FormsAuth app did already exist, and a new sub-directory of this application should use ADFS for authentication. Minimum changes to the existing application code would be a plus ;) Since the application is using ASP.NET MVC this was quite easy to accomplish – WebForms would be a little harder, but still doable. I will discuss the MVC solution here. To solve this problem, I made the following changes to the standard MVC internet application template: Added WIF’s WSFederationAuthenticationModule and SessionAuthenticationModule to the modules section. Add a WIF configuration section to configure the trust with ADFS. Added a new authorization attribute. This attribute will go on controller that demand ADFS (or STS in general) authentication. The attribute logic is quite simple – it checks for authenticated users – and additionally that the authentication type is set to Federation. If that’s the case all is good, if not, the redirect to the STS will be triggered. public class RequireTokenAuthenticationAttribute : AuthorizeAttribute {     protected override bool AuthorizeCore(HttpContextBase httpContext)     {         if (httpContext.User.Identity.IsAuthenticated &&             httpContext.User.Identity.AuthenticationType.Equals( WIF.AuthenticationTypes.Federation, StringComparison.OrdinalIgnoreCase))         {             return true;         }                     return false;     }     protected override void HandleUnauthorizedRequest(AuthorizationContext filterContext)     {                    // do the redirect to the STS         var message = FederatedAuthentication.WSFederationAuthenticationModule.CreateSignInRequest( "passive", filterContext.HttpContext.Request.RawUrl, false);         filterContext.Result = new RedirectResult(message.RequestUrl);     } } That’s it ;) If you want to know why this works (and a possible gotcha) – read my next post.

  Read the article

• Synchronizing ODSEE and OUD

  - by Etienne Remillon

  When it comes to synchronizing between ODSEE and OUD, what should be the best options ? Couple  options are available - Use one of OUD internal capability called Replication Gateway - Use our synchronization tool called Directory Integration Platform part of Oracle Directory Services Plus - Manuel export and import Let's check pro and cons on each method. Replication Gateway is the natural, out of the box solution to perform the task. We created this as a feature of OUD because it works at our replication protocol level. The gateway perform the required adaptation between the ODSEE's replication protocol and OUD's one. The benefits of doing this is that it provide strong consistency between the to type of directories. This fully leverage conflict management implemented in the replication protocols to ensure that changes are applied in a coherent and ordered manner. It does not require specific modification on existing ODSEE production instances such as turning on "retro changelog". Changes are propagated at near speed of replication in both directions. Replication Gateway can also synchronize information that are stored internally in the directory server such as "xxxxx" account locking managed at ODSEE server level and not via the nsyyyy attribute. OUD replication gateway does no require any specific tools or installation specific procedure. It is manged like other OUD component with monitoring and configuration via the standard console. OUD Replication Gateway does not perform adaptation between ODSEE and OUD. Using Directory Integration Protocol as external component to OUD, brings flexibility in remapping and transformations between ODSEE and OUD. There is a price to pay in using DIP to perform the synchronization task. You will have to turn on the retro change log to get access to changes on the ODSEE side (this will impact disk and CPU usage and performances which could be a serious challenge for your existing ODSEE environment (if you have not provisioned additional hardware and instances). You will not benefits of conflict resolution management and this might have to be addressed at application level, which is not always possible to implement. Using export and import seams very simple, but this methodology cannot ensure an highly available deployment with up to date entries on booth sides. This solution can be used if full HA with up-to-date data is not needed (during synchronization time). It often used  if data-cleaning need to take place to avoid polluting a new environment with old un-necessary data.

  Read the article

• Cannot get 3D OpenGL support in Vmware guests, how can I fix this?

  - by jjapol

  I have been working at this problem for 2 days now. I cannot for the life of me enable 3D support in VMWare 9 guests. My specifications are: Hardware: Dell Latitude E5520 laptop. Processor: Intel i7-2620M CPU @ 2.70GHz × 4. Memory: 8GB. Video: Intel Sandybridge Mobile x86/MMX/SSE2 OS: Ubuntu 12.04.1 LTS, 32 bit. Vmware Workstation: 9.0.1 build-894247 Glxgears functions fine. Frame rate is ~60fps. Vmware guest: Windows 7 Starting the Windows 7 guest in VMware throws the following errors: No 3D support is available from the host. and Hardware graphics acceleration is not available. I've read through this VMware forum thread, but again the hardware in the post is different (nVidia). I've followed the instructions at this Ask Ubuntu post as closely as possible as the question is nearly the same as mine although my hardware is different. Answer 1 regarding setting mks.gl.allowBlacklistedDrivers = TRUE; in my vmx configuration file causes the VM to crash when it starts. The second answer I followed as closely as possible. I uninstalled VMware, Did sudo apt-get install build-essential linux-headers-$(uname -r) at a terminal, Added the PPA https://launchpad.net/~glasen/+archive/intel-driver, Then at a terminal did sudo apt-get update && sudo apt-get upgrade -y I reinstalled VMware and have the same results: no 3D in guests. I'm getting the feeling that something is awry with the Sandy Bridge driver, but I can't seem to come up with any solutions. Has anyone out there run across this problem also? By the way, the operation of the likes of Solidworks and AutoCad within a Windpws 7 guest does appear to be improved in VMware 9 vs VMware 8 in spite of the fact that 3D support is lacking in the Windows 7 guest. I'd also add that my glxinfo file was nearly identical to the glxinfo file posted at askubuntu.com/questions/181829/…. I had a total of seven minor differences per a comparison using Meld. –

  Read the article

• Configuring the iPlanet as web tier for Oracle WebCenter Content (UCM)

  - by Adao Junior

  If you are looking for configure the iPlanet as Web server/proxy to use with the Oracle WebCenter Content, you probably won’t found an specific documentation for that or will found some old complex notes related to the old 10gR3. This post will help you out with few simple steps. That’s the diagram of the test scenario, considering that you will deploy in production in an cluster environment. First you need the software, for our scenario you will need: - Oracle iPlanet Web Server 7.0.15+ (Installed) - Oracle WebCenter Content 11gR1 PS5 (Installed) - Oracle WebLogic Web Server Plugins 11g (1.1) - Supported JDK (Using Oracle Java JDK 7u4 for the test) - Certified Client OS - Certified Server OS (Using Oracle Solaris 11 for the test) - Certified Database (Using Oracle Database 11.2.0.3 for the test) Then the configuration: - Download the latest plugin: http://www.oracle.com/technetwork/middleware/ias/downloads/wls-plugins-096117.html - Extract the WLSPlugin11g-iPlanet7.0 in some folder, like <iPlanet_Home>/plugins/wls11 - Include the plugin reference to the magnus.conf: If Unix (Solaris or Linux), include the line: Init fn="load-modules" shlib="/apps/oracle/WebServer7/plugins/wls11/lib/mod_wl.so" If Windows, Include the line:        Init fn="load-modules" shlib="D:\\oracle\\WebServer7\\plugins\\wls11\\lib\\mod_wl.dll" - Include the proxy reference to the obj.conf of each instance: <Object name="weblogic" ppath="*/cs/*"> Service fn="wl-proxy" WebLogicCluster="wcc-node1:16201,wcc-node2:16202, wcc-node3:16203" </Object>   <Object name="weblogic" ppath="*/_dav/*"> Service fn="wl-proxy" WebLogicCluster="wcc-node1:16201,wcc-node2:16202, wcc-node3:16203" </Object>   <Object name="weblogic" ppath="*/_ocsh/*"> Service fn="wl-proxy" WebLogicCluster="wcc-node1:16201,wcc-node2:16202, wcc-node3:16203" </Object>   <Object name="weblogic" ppath="*/adfAuthentication/*"> Service fn="wl-proxy" WebLogicCluster="wcc-node1:16201,wcc-node2:16202, wcc-node3:16203" </Object> If you are using an single node setup, change the Service fn=…. line to something like: Service fn="wl-proxy" WebLogicHost=<wcc-server> WebLogicPort=16200 With these configurations, your should have the WebCenter Content UI working with the iPlanet, test it. [http://<web-server>/cs/] With the UI working, the last step is to configure the WebDav: - Go to the iPlanet Admin Console (usually https://<web-server>:8989) - Go to Configurations >> [instance] >> Virtual Servers >> [Virtual Server] >> WebDAV: - Click New - Populate the URI with /cs/idcplg/webdav: - Select “Anyone (No Authentication)”, the wc Content will take care of the security: This will allow you to use the WebDav feature and the Desktop Integration Suite, including double-byte characters. Anothers iPlanet tunes could be done, I can cover in the next post related to the iPlanet. Cross-posted on the ContentrA.com Blog Related posts:  - Using a Web Proxy Server with WebCenter Family

  Read the article

• Sharing one static ip for both ftp and www service

  - by user11496

  Trying to figure out how to update the Zone record and configure webserver so that one application on the webserver is accessible by public. I'm completely not good at NS/DNS/NAT/firewall/routing/port forwarding/networking etc. "faraday" is the intranet name. Everyone within local network can access all applications hosted on "faraday". Hostname for webserver is "www", FTP server is "ftpserver". Both servers running RHEL4 OS. The goal is to allow anyone outside the company network (public) to access only one of the many applications on "faraday". Hope somebody can help me with some of the questions below, if not all. From zoneedit record, the static IP is used by FTP now. Can I use the same existing static IP - 219.95.10.100, for web service? Currently anyone who enter "http://www.abc.com.my" will be directed to "http://www.abc.com". I don't want this to change. Currently, no one else, except employee on local network, can access "faraday" web pages. How to configure so that when anyone type "http://thisapp.abc.com.my" on their web browser, the url will lead them to "http://faraday/thisapp" (application folder is /var/www/html/thisapp on RHEL4 web server). If possible, how to set the URL will continue to show "http://thisapp.abc.com.my" instead of "http://faraday/thisapp" How to limit/restrict user (those who are not from local network) so they only have access to "http://thisapp.abc.com.my", but not "http://faraday" or "http://faraday/anotherapp", etc. What's the configuration changes needed in /etc/httpd.conf on web server? Company domain name is "abc.com.my". Following is the zone records on www.zoneedit.com. Subdomain Type IP sdsl A 219.95.10.100 ftp CNAME sdsl.abc.com.my @ NS ns3.zoneedit.com @ NS ns7.zoneedit.com WebForward record: New Domain Destination Cloaked www.abc.com.my http://www.abc.com N On my local DNS server, there are 2 zone files: abc.com.my and pnmy.abc.com. > cat abc.com.my.zone ftp CNAME ftp.pnmy.abc.com. sdsl A 219.95.10.100 > cat pnmy.abc.com.zone ftp CNAME ftpserver ftpserver A 172.16.5.1 faraday CNAME www www A 172.16.5.2

  Read the article

• How to recognize an optimus laptop?

  - by kellogs

  kellogs@kellogs-K52Jc ~ $ lspci 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 18) 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18) 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) 00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06) 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 06) 00:1c.5 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 6 (rev 06) 00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a6) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 06) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 06) 00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 06) 02:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) 03:00.0 System peripheral: JMicron Technology Corp. SD/MMC Host Controller (rev 80) 03:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller (rev 80) 03:00.3 System peripheral: JMicron Technology Corp. MS Host Controller (rev 80) 03:00.4 System peripheral: JMicron Technology Corp. xD Host Controller (rev 80) 03:00.5 Ethernet controller: JMicron Technology Corp. JMC250 PCI Express Gigabit Ethernet Controller (rev 03) ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 05) ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 05) ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 05) ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 05) ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 05) ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 05) kellogs@kellogs-K52Jc ~ $ inxi -SGx System: Host: kellogs-K52Jc Kernel: 3.5.0-17-generic x86_64 (64 bit, gcc: 4.7.2) Desktop: KDE 4.9.5 (Qt 4.8.3) Distro: Linux Mint 14 Nadia Graphics: Card: Intel Core Processor Integrated Graphics Controller bus-ID: 00:02.0 X.Org: 1.13.0 drivers: intel (unloaded: fbdev,vesa) Resolution: [email protected] GLX Renderer: Mesa DRI Intel Ironlake Mobile GLX Version: 2.1 Mesa 9.0.3 Direct Rendering: Yes kellogs@kellogs-K52Jc ~ $ lshw [...] *-display description: VGA compatible controller product: Core Processor Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 18 width: 64 bits clock: 33MHz capabilities: vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:44 memory:d0000000-d03fffff memory:c0000000-cfffffff ioport:e080(size=8) Manufacturer advertises the K52Jc model which I bought as optimus enabled. However, no traces of it in the output above. Of course, Bumblebee would not start on this machine. Should I rest assured that is a defective / un-optimused machine ?

  Read the article

• Misaligned Display on Resume

  - by Shaun Killingbeck

  I have an odd issue with my laptop display when resuming from suspend. When I have an additional monitor connected there is no issue. However without an additional monitor connected, after resuming only the left 10% of the laptop screen (just enough to show the Unity Launcher and a bit more) is visibly working, although strangely in a screenshot this same 10% is shown on the right hand side of the screenshot: I ran xrandr --verbose before and after resume, and the only difference (using diff) was: 2c2 < LVDS connected 1366x768+0+0 (0x98) normal (normal left inverted right x axis y axis) 344mm x 194mm --- > LVDS connected 1366x768+1280+0 (0x98) normal (normal left inverted right x axis y axis) 344mm x 194mm This seems to suggest the screen position has been shifted by 1280 horizontally, the width of the second monitor I use. Indeed, running the command xrandr --output LVDS --pos 0x0 does bring the screen back to normal. However, I don't want to have to run this command every time, I'd prefer to cure the source of the problem than just correct the symptoms. Any ideas on how to get Ubuntu to keep the display configuration settings from before suspend when it resumes? or why it changes at all? Heres some technical details that might be pertinent: HP Pavilion DV6 Laptop Ubuntu 13.04 AMD Radeon HD 6400M Series AMD Radeon HD 6520G Using proprietary flgrx-updates driver and amdcccle (Catalyst Control Center) (Unfortunately the open source driver causes my laptop to run even hotter than it already does, otherwise I'd use that) The contents of Xorg.conf: Section "ServerLayout" Identifier "amdcccle Layout" Screen 0 "amdcccle-Screen[0]-0" 0 0 EndSection Section "Module" Load "glx" EndSection Section "Monitor" Identifier "0-LVDS" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1280x768" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Monitor" Identifier "0-CRT1" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1280x768" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Monitor" Identifier "1-LVDS" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "TargetRefresh" "60" Option "Position" "1280 0" Option "Rotate" "normal" Option "Disable" "false" Option "PreferredMode" "1366x768" EndSection Section "Monitor" Identifier "1-CRT1" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" Option "PreferredMode" "1280x1024" EndSection Section "Device" Identifier "amdcccle-Device[0]-0" Driver "fglrx" Option "Monitor-LVDS" "1-LVDS" Option "Monitor-CRT1" "1-CRT1" BusID "PCI:0:1:0" EndSection Section "Device" Identifier "amdcccle-Device[0]-1" Driver "fglrx" Option "Monitor-LVDS" "1-LVDS" BusID "PCI:0:1:0" Screen 1 EndSection Section "Screen" Identifier "Default Screen" DefaultDepth 24 EndSection Section "Screen" Identifier "amdcccle-Screen[0]-0" Device "amdcccle-Device[0]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Virtual 2646 2646 Depth 24 EndSubSection EndSection Section "Screen" Identifier "amdcccle-Screen[0]-1" Device "amdcccle-Device[0]-1" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection

  Read the article

• Partial Submit vs. Auto Submit

  - by Frank Nimphius

  Partial Submit ADF Faces adds the concept of partial form submit to JavaServer Faces 1.2 and beyond. A partial submit actually is a form submit that does not require a page refresh and only updates components in the view that are referenced from the command component PartialTriggers property. Another option for refreshing a component in response to a partial submit is call AdfContext.getCurrentInstance.addPartialTarget(component_instance_handle_goes_here)in a managed bean. If a form contains required fields that the user left empty invoking the partial submit, then errors are shown for each of the field as the full form gets submitted. Autosubmit An input component that has its autosubmit property set to true also performs a partial submit of the form. However, this time it doesn't submit the entire form but only the component that triggers the submit plus components referenced it in their PartialTriggers property. For example, consider a form that has three input fields inpA, inpB and inpC with autosubmit=true set on inpA and required=true set on inpB and inpC. use case 1: Running the view, entering data into inpA and then tabbing out of the field will submit the content for inpA but not for inpB and inpC. Further more, none of the required field settings on inpB and inpC causes an error. use case 2: You change the configuration of inpC and set its PartialTriggers property to point to the ID of component inpA. When rerunning the sample, entering a value into inpA and tabbing out of the field will now submit the inpA and inpC fields and thus show an error for the missing required value on inpC. Internally, using autosubmit=true on an input component sets the event root to just this field, which good to have in case of dependent field validation or behavior. The event root can extended to include other components by using the Partial Triggers property on these components to point to the input field that has autosubmit=true defined. PartialSubmit vs. AutoSubmit Partial submit set on a command component submits the whole form and leaves it to the developer to decide which UI component is refreshed in response. Client side required field validation (as well as the server side equivalent) is not disabled by executed in this scenario. Setting immediate=true on the command item to skip validation doesn't help as it would also skip the model update. Auto submit is a functionality on the input components and also performs a partial form submit. However, in addition an event root is defined that narrows the scope for the submitted data and thus the components that are validated on the request. To read more about this topic, see: http://docs.oracle.com/cd/E23943_01/web.1111/b31973/af_lifecycle.htm#CIAHCFJF

  Read the article

• Do you know about the Visual Studio 2010 Database Projects Guidance?

  - by Martin Hinshelwood

  Early on in the Team System (now Visual Studio ALM) cycle a new product surfaced within Team System that was affectionately called “Data Dude”, but had the more formal name of “Visual Studio 2005 Team Edition for Database Professionals”. The purpose of this product was to try and make the database a “first class citizen” in the development world. Those that started using Visual Studio 2005 Team Edition for Database Professionals (Data Dude) loved it, but everyone else did not get it. The capabilities were a little patchy, but the one thing it did bring to the party was the ability to put your database schema under source control. This was revolutionary as previously your DBA sat as far away from the team as possible, and usually in a dark cupboard, now they could partake of all the goodness of Version Control, Work Item Tracking and automated builds. The problem was that the understanding required to manage these projects was very different to that needed previously. Then the Visual Studio ALM Rangers got a hold of it…and produced some of the best guidance available. Figure: Download the guidance from http://vsdatabaseguide.codeplex.com/ This guidance discusses scenarios and approaches of using the Database Projects in Visual Studio 2010 to help you use the tools more effectively and maximize their value to your organization This guidance is focused on these five areas: Solution and Project Management Source Code Control and Configuration Management Integrating External Changes with the Project System Build and Deployment Automation with Visual Studio Database Projects Database Testing and Deployment Verification Each of these areas has common guidance, usage scenarios, hands on labs, and lessons learned from real world engagements and the community discussions.   The guidance is broken down into three packages: Guidance documentation Hands-on-lab (HOL) documentation note: The documentation is available in XPS-only format packages or complete XPS,PDF,DOCX format packages HOL Package If you need assistance and no one else can help, then you may need to call the Visual Studio ALM Rangers. The Visual Studio ALM Rangers have the mission to provide out of band solutions for missing features or guidance. They are supported by Microsoft Product Group, Microsoft Consulting Services, Microsoft Most Valued Professionals (MVPs) and technical specialists from technology communities around the globe, giving you a real-world view from the field, where the technology has been tested and used. For more information on the Rangers please visit http://msdn.microsoft.com/en-us/vstudio/ee358786.aspx and for more a list of other Rangers projects please see http://msdn.microsoft.com/en-us/vstudio/ee358787.aspx.

  Read the article

• Planning Bulletin for JRE 7: What EBS Customers Can Do Today

  - by Steven Chan (Oracle Development)

  An initiative to certify Oracle E-Business Suite with JRE 7 desktop clients is underway.  We have tested EBS 11.5.10.2, 12.0, and 12.1 with JRE 7. We have fixes for nearly all of the compatibility issues now, and are working hard to produce the remaining fixes quickly. A. When will JRE 7 be certified with Oracle E-Business Suite? We will announce the certification of the E-Business Suite with JRE 7 once all fixes are available, verified, and documented.  Certification announcements will be distributed through My Oracle Support, My Oracle Support Community Forums, Oracle Technology Network Forums, newsletters, and user group news outlets. Oracle's Revenue Recognition rules prohibit us from discussing certification and release dates.  In addition to the standard communication channels listed above, customers are encouraged to monitor or subscribe to this blog.    B. What can customers do to prepare for the JRE 7 certification? Customers should ensure that they are on the latest available JRE 6 update. Of the compatibility issues identified so far with JRE 7, the most critical is an issue that prevents E-Business Suite Forms-based products from launching on Windows desktops that are running JRE 7.  Customers can prevent this issue today by ensuring that they have applied the latest certified patches documented for JRE 6 configurations to their EBS application tier servers: Apply Forms patch 14615390 to EBS 11i environments (Note 125767.1) Apply Forms patch 14614795 to EBS 12.0 and 12.1 environments (Note 437878.1) These patches are compatible with JRE 6 and 7, production ready, and fully-tested with the E-Business Suite.  These patches may be applied immediately to all E-Business Suite environments. All other Forms prerequisites documented in the Notes above should also be applied now. C. What else will be required by the final certified configuration? Oracle expects that all other compatibility issues will be resolved by installing a specific JRE 7 release, at minimum.  That specific release has not been finalized yet, and this is subject to change. D.  Where will the official patch requirements be documented? All patches required for ensuring full compatibility of the E-Business Suite with JRE 7 will be documented in updates to these published Notes: For EBS 11i: Deploying Sun JRE (Native Plug-in) for Windows Clients in Oracle E-Business Suite Release 11i (Note 290807.1) Upgrading Developer 6i with Oracle E-Business Suite 11i (Note 125767.1) For EBS 12 Deploying Sun JRE (Native Plug-in) for Windows Clients in Oracle E-Business Suite Release 12 (Note 393931.1) Upgrading OracleAS 10g Forms and Reports in Oracle E-Business Suite Release 12 (Note 437878.1) Disclaimer The preceding is intended to outline our general product direction.  It is intended for information purposes only, and may not be incorporated into any contract.   It is not a commitment to deliver any material, code, or functionality, and should not be relied upon in making purchasing decision.  The development, release, and timing of any features or functionality described for Oracle’s products remains at the sole discretion of Oracle.

  Read the article

• How to run a local and external website on same computer with 2 NIC's, 2 Routers and 3 seperate networks?

  - by CandN

  Hello and hopefully I can get some answers to my question, though I think I'm making it more complicated for myself than it has to be. My business is a used auto dealership, and I'm in the process of connecting it to the world - via ethernet from the business server [running Xubuntu] to the ISP's ethernet router/modem, so that I can host our own website (no more than 5-10 people probably visiting at any time - mainly paying their bill), as well as set up a web based internal-intranet site - via DD-WRT Router on the 2nd NIC on the business server - that'll be accessed over Wifi from employees personal devices. On the other end of this is trying to offer free wifi to customers that is completely seperate of the 2 mentioned above networks. Quick Rundown: 1. Web Site for Customers to access. I'm going to use no-ip.org for DNS for the moment being, so I'll have a site that customers can access from anywhere in the world at "mybiz.no-ip.org". This will be forwarded to NIC #1 on the server, possibly at an address like "108.69.." as its being provided an IP from the ISP's modem/router, that is from Time Warner, and they allow NO! configuration options. Web Site for employees to access. I'm trying not to use the server too much as a desktop, only for critical situations, so having a backend thats seperate from the front-facing website is critical. This will be the DD-WRT router hardwired into NIC #2 on the server. This WiFi will be password accessible. Public WiFi for customers. The DD-WRT can seperate networks if I'm correct, I just can't seem to understand how to seperate the 2 and still have internet access on both. I've done it before, but the "Public" wifi (with no password set to connect) kept dropping the connection like a problem was happening that I couldn't figure out. So if I could do a little drawing, this is how it would/should possibly look. ISP -- [Sends Public Facing IP of 108.69.*.1/8] -- ISP Modem Router ISP Modem Router (Ethernet Only) -- [Gives Private IP 108.69.*.2] -- Server NIC #1 Server NIC #1 -- [Gives Private IP 108.69.*.3] -- DD-WRT Router DD-WRT Router -- [DHCP Enabled Giving IP's 172.16.0.0/16] -- Employees Network | | --------- [DHCP Enabled Giving IP's 192.168.1.0/24] -- Public WIFI Hope it's not too confusing, but it anyone could give me some good direct tutorials on how to accomplish this, or if YOU know, then it'll be alot of help. Thanks to all in advance. Need anything else to be explained? Don't hesitate to ask! *Using The LAMP stack with Webmin/VirtualMin -Customer site is located in /var/www2/ -Private Employees site is located in /var/www/ Using no-ip.org's dynamic client updater

  Read the article

• In a state machine, is it a good idea to separate states and transitions?

  - by codablank1

  I have implemented a small state machine in this way (in pseudo code): class Input {} class KeyInput inherits Input { public : enum { Key_A, Key_B, ..., } } class GUIInput inherits Input { public : enum { Button_A, Button_B, ..., } } enum Event { NewGame, Quit, OpenOptions, OpenMenu } class BaseState { String name; Event get_event (Input input); void handle (Event e); //event handling function } class Menu inherits BaseState{...} class InGame inherits BaseState{...} class Options inherits BaseState{...} class StateMachine { public : BaseState get_current_state () { return current_state; } void add_state (String name, BaseState state) { statesMap.insert(name, state);} //raise an exception if state not found BaseState get_state (String name) { return statesMap.find(name); } //raise an exception if state or next_state not found void add_transition (Event event, String state_name, String next_state_name) { BaseState state = get_state(state_name); BaseState next_state = get_state(next_state_name); transitionsMap.insert(pair<event, state>, next_state); } //raise exception if couple not found BaseState get_next_state(Event event, BaseState state) { return transitionsMap.find(pair<event, state>); } void handle(Input input) { Event event = current_state.get_event(input) current_state.handle(event); current_state = get_next_state(event, current_state); } private : BaseState current_state; map<String, BaseState> statesMap; //map of all states in the machine //for each couple event/state, this map stores the next state map<pair<Event, BaseState>, BaseState> transitionsMap; } So, before getting the transition, I need to convert the key input or GUI input to the proper event, given the current state; thus the same key 'W' can launch a new game in the 'Menu' state or moving forward a character in the 'InGame' state; Then I get the next state from the transitionsMap and I update the current state Does this configuration seem valid to you ? Is it a good idea to separate states and transitions ? And I have some kind of trouble to represent a 'null state' or a 'null event'; What initial value can I give to the current state and which one should be returned by get_state if it fails ?

  Read the article

• ArchBeat Link-o-Rama for 2012-08-29

  - by Bob Rhubart

  ORCLville: OOW 2012 - Crystal BallOracle ACE Director Floyd Teter cooks up some tongue-in-cheek predictions for news and announcements that might come out of Oracle OpenWorld 2012. What's your prediction? Oracle Optimized Solutions at Oracle OpenWorld 2012 | Oracle Hardware Hardware matters, too! The people behind the Oracle Hardware blog have put together a list of Oracle Openworld 2012 sessions focused Oracle Optimized Solutions, "designed, pre-tested, tuned and fully documented architectures for optimal performance and availability." Just plug the session ID numbers into Schedule Builder and you're good to go. AIX Checklist for stable OBIEE deployment | Dick Dunbar "OBIEE is a complicated system with many moving parts and connection points," according to Oracle Business Inteligence escalation engineer Dick Dunbar. "The purpose of this article is to provide a checklist to discuss OBIEE deployment with your systems administrators." Demo for OPN: Coherence Management with EM Cloud Control 12c Oracle Partner Network members can check out a new Coherence Management demo that showcases some of the key capabilities of Management Pack for Oracle Coherence and JVM Diagnostics. "The demo flow showcases the key enhancements made in Enterprise Manager 12c release which includes new customizable performance summary, cache data management and configuration management," according to the WebLogic Partner Community EMEA blog. The Pragmatic Architect: To Boldly Go Where No One Has Gone Before | Frank Buschmann "Many architects have technical knowledge that's both impressive and sound, which is indeed an inevitable basis for design success," says Frank Buschmann. "Yet, a lot of software projects fail or suffer due to severe challenges in their architecture. The key to mastery is how architects approach design, what they value, and where they focus their attention and work." As retail dies, whom will be the winners? | Peter Evans-Greenwood "The problem for many retailers is that how consumers shop has changed but the the retailers haven't adapted, " says Peter Evans-Greenwood. "Their sole virtue was to be the last step in a supply chain delivering somebody else's products to the consumer. However, being the last step in the supply chain is no longer a virtue when consumers skip across channels and can reach around the globe, no longer dependant on or limited to what they can find locally." Thought for the Day "Brains require stimulation. If you're locked into a pattern of work, work, and more work, your brain soon habituates - the same way that it lets you stop hearing a clock ticking. So, if you want to be more effective at work, you must, paradoxically, be less single-minded in your devotion to work. Anything you do—anything—that stimulates new segments of your brain will make you a more effective programmer or analyst. I promise, with a money-back guarantee." — Gerald M. Weinberg Source: SoftwareQuotes.com

  Read the article

• How do I get long command lines to wrap to the next line?

  - by BrianH

  Edit It was my .bashrc file. I've copied the same profile from machine to machine, and I used special characters in my $PS1 that are somehow throwing it off. I'm now sticking with the standard bash variables for my $PS1. Thanks to @ændrük for the tip on the .bashrc! ...End Edit... Something I have noticed in Ubuntu for a long time that has been frustrating to me is when I am typing a command at the command line that gets longer (wider) than the terminal width, instead of wrapping to a new line, it goes back to column 1 on the same line and starts over-writing the beginning of my command line. (It doesn't actually overwrite the actual command, but visually, it is overwriting the text that was displayed). It's hard to explain without seeing it, but let's say my terminal was 20 characters wide (Mine is more like 120 characters - but for the sake of an example), and I want to echo the English alphabet. What I type is this: echo abcdefghijklmnopqrstuvwxyz But what my terminal looks like before I hit the key is: pqrstuvwxyzghijklmno When I hit enter, it echos abcdefghijklmnopqrstuvwxyz so I know the command was received properly. It just wrapped my typing after the "o" and started over on the same line. What I would expect to happen, if I typed this command in on a terminal that was only 20 characters wide would be this: echo abcdefghijklmno pqrstuvwxyz Background: I am using bash as my shell, and I have this line in my ~/.bashrc: set -o vi to be able to navigate the command line with VI commands. I am currently using Ubuntu 10.10 server, and connecting to the server with Putty. In any other environment I have worked in, if I type a long command line, it will add a new line underneath the line I am working on when my command gets longer than the terminal width and when I keep typing I can see my command on 2 different lines. But for as long as I can remember using Ubuntu, my long commands only occupy 1 line. This also happens when I am going back to previous commands in the history (I hit Esc, then 'K' to go back to previous commands) - when I get to a previous command that was longer than the terminal width, the command line gets mangled and I cannot tell where I am at in the command. The only work-around I have found to see the entire long command is to hit "Esc-V", which opens up the current command in a VI editor. I don't think I have anything odd in my .bashrc file. I commented out the "set -o vi" line, and I still had the problem. I downloaded a fresh copy of Putty and didn't make any changes to the configuration - I just typed in my host name to connect, and I still have the problem, so I don't think it's anything with Putty (unless I need to make some config changes) Has anyone else had this problem, and can anyone think of how to fix it? Thanks in advance! Brian

  Read the article

• Web Development Goes Pre-Visual InterDev

  - by Ken Cox [MVP]

  As a longtime and hardcore ASP.NET webforms developer, I’m finding the new client-side development world a bit of a grind.  I love learning new technologies, but I can’t help feeling we’ve regressed and lost our old RAD advantage as we move heavy lifting to the client. For my latest project, I’m using Telerik’s KendoUI in Visual Studio 2012. To say I feel clumsy writing this much JavaScript is an understatement. It seems like the only safe way to ‘write’ this code is by copying a working snippet from someone else and pasting it into my HTML page.  For me, JavaScript has largely been for small UI tasks like client-side validation and a bit of AJAX – and often emitted by a server-side control. I find myself today lost in nests of curly braces that Ctrl+K, Ctrl+D doesn’t seem to understand that well either. IntelliSense, my old syntax saviour, doesn’t seem to have kept up with this cobweb of code either. Code completion? Not seeing it. As I fumbled about this evening, I thought about how web development rocketed forward when Microsoft introduced Visual InterDev. Its Design-Time Controls (DTCs) changed the way we created sites. All the iterations of Visual Studio have enhanced that server-side experience where you let a tool write the bulk of the code and manually finesse it from there. What happened? Why am I typing  properties and values (especially default values!) into VS 2012 to get a client-side grid on a page? Where are the drag and drop objects that traditionally provided 70 percent of the mark-up and configuration?  Did we forget how to write Property Pages where you enter a value and the correct syntax appears magically in the source code? To me, the tooling was looking the other way as the scene shifted from server-side code to nimble client-side script. It’ll have to catch up. Although JavaScript is the lingua franca of web browsers, the language is unwieldy, tough to maintain, and messy to debug. If a .NET JIT compiler can turn our VB, F#, and C# source code into an Intermediate Language that executes on a computer, I don’t see why there can’t be a client-side compiler that turns a .NET language into JavaScript that browsers can consume.

  Read the article

• No suspend on lid closing on a Samsung Series 5 14" NP530U4BI

  - by dmeu

  Ok, i realize I am not the only one, but I will try to provide all info possible to make it exemplary as possible and narrow down the error sources. I have a fresh install of Ubuntu 12.04 and the suspend worked fine upon having it freshly installed but now it does not anymore. The suspend option from the system power button on the top right works fine. Things I did do which I don't know if they are related: Install and remove againthe FGLRX drivers (Radeon graphic card) Install Jupiter power managment (shutting it down is not changin anything) Plug in and out an external display The configuration I know of is well set: In System Settings/Power all is set to suspend when closing lid Double checked with dconf-editor, everything set to suspend So, from here on I don't know how to proceed.. what are common problems that cause this error? EDIT: My computer model is: Samsung Series 5 14" NP530U4BI $ sudo lspci -nn 00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller 00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port 00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller 00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller 00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 00:1c.3 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 00:1c.4 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 00:1f.0 ISA bridge [0601]: Intel Corporation HM65 Express Chipset Family LPC Controller [8086:1c49] (rev 04) 00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller 00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] (rev 04) 01:00.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI Thames [Radeon 7500M/7600M Series] 02:00.0 Network controller [0280]: Intel Corporation Centrino Advanced-N 6230 03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller 04:00.0 USB controller [0c03]: ASMedia Technology Inc. ASM1042 SuperSpeed USB Host Controller

  Read the article

• EBS – ATG Webcast 9/11 - 9/12

  - by cwarticki

  EBS – ATG Webcast in September 2012 EBS – Multiple Language Support (MLS) Agenda :EBS is MLS Ready                                                                                 NLS / MLS Basic ArchitectureNLS / MLS InstallationNLS / MLS Configuration Settings                                                                    TroubleshootingQuestion and AnswersEMEA Session : September 11, 2012 at 09:00 UK / 10:00 CET / 13:30 India / 17:00 Japan / 18:00 Sydney (Australia) Details & Registration : Note 1480084.1 Direct link to register in WebEx US Session : September 12, 2012 at 18:00 UK / 19:00 CET / 10:00 AM Pacific / 11:00 AM Mountain/ 01:00 PM Eastern ·      Details & Registration : Note 1480085.1 ·      Direct link to register in WebEx ·         Schedules, recordings and the Presentations of the Advisor Webcast drove under the EBS Applications Technology area can be found in Note 1186338.1. ·         Current Schedules of Advisor Webcast for all Oracle Products can be found on Note 740966.1 ·         Post Presentation Recordings of the Advisor Webcasts for all Oracle Products can be found on Note 740964.1 If you have any question about the schedules or if you have a suggestion for an Advisor Webcast to be planned in future, please send an E-Mail to Ruediger Ziegler.

  Read the article

• No client internet access when setting up these iptables rules

  - by Siriss

  I have read many other posts but cannot figure this out. eth0 is my external connected to a Comcast modem. The server has internet access with no issues. eth1 is internal and running DHCP for the clients. I have DHCP working just fine, all my clients can get an IP and ping the server but they cannot access the internet. I am using ISC-DHCP-SERVER and have set /etc/default/isc-dhcp-server to INTERFACE="eht1" Here is my dhcpd.conf file located in /etc/dhcp/dhcpd.conf ddns-update-style interim; ignore client-updates; subnet 10.0.10.0 netmask 255.255.255.0 { range 10.0.10.10 10.0.10.200; option routers 10.0.10.2; option subnet-mask 255.255.255.0; option domain-name-servers 208.67.222.222, 208.67.220.220; #OpenDNS # option domain-name "example.com"; default-lease-time 21600; max-lease-time 43200; authoritative; } I have made the *net.ipv4.ip_forward=1* change in /etc/sysctl.conf here is my interfaces file: auto lo iface lo inet loopback auto eth0 iface eth0 inet dhcp iface eth1 inet static address 10.0.10.2 netmask 255.255.255.0 network 10.0.10.0 auto eth1 And finally- here is my iptables.conf file: # Firewall configuration written by system-config-firewall # Manual customization of this file is not recommended. *nat :PREROUTING ACCEPT [0:0] :OUTPUT ACCEPT [0:0] :POSTROUTING ACCEPT [0:0] -A POSTROUTING -s 10.0.10.0/24 -o eth0 -j MASQUERADE #-A PREROUTING -i eth0 -p tcp --dport 59668 -j DNAT --to-destination 10.0.10.2:59668 COMMIT *filter :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [0:0] -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT -A INPUT -p icmp -j ACCEPT -A INPUT -i lo -j ACCEPT -A INPUT -i eth1 -j ACCEPT -A INPUT -m state --state NEW -m tcp -p tcp --dport 22 -j ACCEPT -A INPUT -m state --state NEW -m tcp -p tcp --dport 80 -j ACCEPT -A INPUT -m state --state NEW -m tcp -p tcp --dport 443 -j ACCEPT -A INPUT -m state --state NEW -m tcp -p tcp --dport 53 -j ACCEPT -A INPUT -m state --state NEW -m udp -p udp --dport 53 -j ACCEPT -A FORWARD -s 10.0.10.0/24 -o eth0 -j ACCEPT -A FORWARD -d 10.0.10.0/24 -m state --state ESTABLISHED,RELATED -i eth0 -j ACCEPT -A FORWARD -p icmp -j ACCEPT -A FORWARD -i lo -j ACCEPT -A FORWARD -i eth1 -j ACCEPT #-A FORWARD -i eth0 -m state --state NEW -m tcp -p tcp -d 10.0.10.2 --dport 59668 -j ACCEPT -A INPUT -j REJECT --reject-with icmp-host-prohibited -A FORWARD -j REJECT --reject-with icmp-host-prohibited COMMIT I am completely stuck. I cannot figure out why the clients cannot access the internet. Am I missing a service? Is a service not running? Any help would be greatly appreciated. I tried to be as thorough as possible but please let me know if I have missed something. Thank you!

  Read the article

• Auto-run script when iPad plugged in

  - by oldmankit

  The way that Ubuntu handles documents on the iPad is awesome (without any configuration required). It beats windows, even after you install iTunes. I want to have the documents in certain iPad apps automatically synced into my Dropbox directory whenever the iPad is connected by USB. The syncing is easy; getting the script to run is not. I have already read the information in various (very out-of-date) tutorials. The best I could find was here: http://askubuntu.com/a/25091/16157 I used lsusb, with the following results: Bus 002 Device 012: ID 05ac:12a2 Apple, Inc. (Please note that when an iPad is connected, Ubuntu seems to mount it to two different mount points: one for "Documents" and one for the whole iPad filesystem. They are both mounted in ~/.gvfs) I have created the following file /etc/udev/rules.d/96-ipad_sync.rules ACTION=="add", ATTRS{idVendor}=="05ac", ATTRS{idProduct}=="12a2", RUN+="/home/kit/bin/jobdone2" I want it to run a test script (which sleeps for five seconds then plays an mp3 file. The test script works, and I have typed the location correctly). So far, when I plug the iPad in, nothing happens. Yes, I waited five seconds. This is the output I get from typing udevadm monitor –env KERNEL[29348.114010] add /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4 (usb) KERNEL[29348.114844] add /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0 (usb) KERNEL[29348.129118] remove /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0 (usb) KERNEL[29348.130699] add /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:4.0 (usb) KERNEL[29348.130845] add /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:4.1 (usb) KERNEL[29348.130909] add /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:4.2 (usb) UDEV [29348.163861] add /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4 (usb) UDEV [29348.170390] add /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0 (usb) UDEV [29348.171521] add /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:4.1 (usb) UDEV [29348.172230] remove /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0 (usb) UDEV [29348.172890] add /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:4.2 (usb) UDEV [29348.175645] add /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:4.0 (usb)

  Read the article

• Application Integration Future &ndash; BizTalk Server &amp; Windows Azure (TechEd 2012)

  - by SURESH GIRIRAJAN

  I am really excited to see lot of new news around BizTalk in TechEd 2012. I was recently watching the session presented by Sriram and Rajesh on “Application Integration Futures: The Road Map and What's Next on Windows Azure”. It was great session and lot of interesting stuff about the feature updates for BizTalk and Azure integration. I have highlighted them below, definitely customers who haven’t started using Microsoft BizTalk ESB Toolkit should start using them which is going to be part of the core BizTalk product in future release, which is cool… BizTalk Server feature enhancements Manageability: ESB Tool Kit is going to be part of the core BizTalk product and Setup. Visualize BizTalk artifact dependencies in BizTalk administration console. HIS administration using configuration files. Performance: Improvements in ordered send port scenarios Improved performance in dynamic send ports and ESB, also to configure BizTalk host handler for dynamic send ports. Right now it runs under default host, which does not enable to scale. MLLP adapter enhancements and DB2 client transaction load balancing / client bulk insert. Platform Support: Visual Studio 2012, Windows 8 Server, SQL Server 2012, Office 15 and System Center 2012. B2B enhancements to support latest industry standards natively. Connectivity Improvements: Consume REST service directly in BizTalk SharePoint integration made easier. Improvements to SMTP adapter, to add macros for sending same email with different content to different parties. Connectivity to Azure Service Bus relay, queues and topics. DB2 client connectivity to SQL Server and SQL Server connectivity to Informix. CICS Http client connectivity to Windows. Azure: Use Azure as IaaS/PaaS for BizTalk environment. Use Azure to provision BizTalk environment for test environment / development. Later move to On-premises or build a Hybrid cloud approach. Eliminate HW procurement for BizTalk environment for testing / demos / development etc. Enable to create BizTalk farm easily and remove/add more servers as needed. EAI Service: EAI Bridge Protocol transformation Message Transformation Running custom code Message Enrichment Hybrid Connectivity LOB Applications On-premises Application On-premises Connectivity to Applications in the cloud Queues/ Topics Ftp Devices Web Services Bridge can be customized based on the service needs to provide different capabilities needed as part of the bridge. Look at the sample for EDI bridge for EDI service sample. Also with Tracking enabled through the portal. http://msdn.microsoft.com/en-us/library/windowsazure/hh674490 Adapters: Service Bus Messaging adapter - New adapter added. WebHttp adapter - For REST services. NetTcpRelay adapter - New adapter added. I will start posting more and once I start playing with this…

  Read the article

• Is Cygwin or Windows Command Prompt preferable for getting a consistent terminal experience for development?

  - by Paul Hazen

  The question: Which is better, installing cygwin or one of its cousins on all my windows machines to have a consistent terminal experience across all my development machines, or becoming well trained in the skill of mentally switching from linux terminal to windows command prompt? Systems I use: OSX Lion on a Macbook Air Windows 8 on a desktop Windows 7 on the same desktop Fedora 16 on the same desktop What I'm trying to accomplish Configure an entirely consistent (or consistent enough) terminal experience across all my machines. "enough" in this context is clearly subjective. Please be clear in your answer why the configuration you suggest is consistent enough. One more thing to keep in mind: While I do write a lot of code intended to run on Windows (actually code that runs on Windows Phone which necessitates a windows machine), I also write a lot of Java code, and prefer to do so in vim. I test a local repo in Java on my windows machine, and push to another test machine running ubuntu later in the development stage. When I push to the ubuntu machine, I'm exclusively in terminal, since I'm accessing it via SSH. Summary, with more accurate question: Is there a good way to accomplish what I'm trying to do, or is it better to get accustomed to remembering different commands based on the system I'm on? Which (if either) is considered "best practice" by the development community? Alternatively, for a consistent development experience, would it be better to write all my code SSHed into another machine, and move things to windows for compile / build only when I needed to? That seems like too much work... but could be a solution. Update: While there are insightful responses below, I have yet to hear an answer that talks about why any given solution is superior. Cygwin/GnuWin32 is certainly a way to accomplish a similar experience on all platforms, but since I'm just learning all things command line, I don't want to set myself up to do a lot of relearning/unlearning in the future. Cygwin/GnuWin32 has its peculiarities I would imagine, and being aware of how that set up works on Windows is a learning curve. Additionally, using Cygwin/GnuWin32 robs me of learning the benefits of PowerShell. As a newcomer to working in a command line, which path should I choose to minimize having to relearn/unlearn things in the future? or as my first paragraph poses: [is it better to use Cygwin] ...or [become] well trained in the skill of mentally switching from linux terminal to windows command prompt?

  Read the article

• iwlwifi on lenovo z570 disabled by hardware switch

  - by Kevin Gallagher

  It was working fine with windows 7. The hardware switch is not disabled. I've toggled it back and forth dozens of times. The wifi light never turns on and it always lists as hardware disabled. I have the latest updates installed. I've been searching for solutions, but none of them seem to work for me. I've tried removing acer-wmi. I've tried setting 11n_disable=1. I've tried resetting the bios. I've tried using rfkill to unblock (only removes soft block). I've rebooted dozens of times. The wifi light turns off as soon as grub loads. Edit: I have a usb edimax wireless nic. It shows hardware disabled as well (although rfkill lists as unblocked). If I unload iwlwifi the usb nic works fine. uname -a `Linux xxx-Ideapad-Z570 3.2.0-55-generic #85-Ubuntu SMP Wed Oct 2 12:29:27 UTC 2013 x86_64 x86_64 x86_64 GNU/Linu`x rfkill list 19: phy18: Wireless LAN Soft blocked: no Hard blocked: yes dmesg [43463.022996] Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree: [43463.023002] Copyright(c) 2003-2011 Intel Corporation [43463.023107] iwlwifi 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [43463.023190] iwlwifi 0000:03:00.0: setting latency timer to 64 [43463.023253] iwlwifi 0000:03:00.0: pci_resource_len = 0x00002000 [43463.023257] iwlwifi 0000:03:00.0: pci_resource_base = ffffc900057c8000 [43463.023261] iwlwifi 0000:03:00.0: HW Revision ID = 0x0 [43463.023797] iwlwifi 0000:03:00.0: irq 43 for MSI/MSI-X [43463.024013] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Wireless-N 1000 BGN, REV=0x6C [43463.024250] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S [43463.045496] iwlwifi 0000:03:00.0: device EEPROM VER=0x15d, CALIB=0x6 [43463.045501] iwlwifi 0000:03:00.0: Device SKU: 0X50 [43463.045504] iwlwifi 0000:03:00.0: Valid Tx ant: 0X1, Valid Rx ant: 0X3 [43463.045542] iwlwifi 0000:03:00.0: Tunable channels: 13 802.11bg, 0 802.11a channels [43463.045744] iwlwifi 0000:03:00.0: RF_KILL bit toggled to disable radio. [43463.047652] iwlwifi 0000:03:00.0: loaded firmware version 39.31.5.1 build 35138 [43463.047823] Registered led device: phy18-led [43463.047895] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [43463.048037] ieee80211 phy18: Selected rate control algorithm 'iwl-agn-rs' [43463.055533] ADDRCONF(NETDEV_UP): wlan0: link is not ready nm-tool State: connected (global) - Device: wlan0 ---------------------------------------------------------------- Type: 802.11 WiFi Driver: iwlwifi State: unavailable Default: no HW Address: 74:E5:0B:4A:9F:C2 Capabilities: Wireless Properties WEP Encryption: yes WPA Encryption: yes WPA2 Encryption: yes Wireless Access Points lshw -C network *-network DISABLED description: Wireless interface product: Centrino Wireless-N 1000 [Condor Peak] vendor: Intel Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 00 serial: 74:e5:0b:4a:9f:c2 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlwifi driverversion=3.2.0-55-generic firmware=39.31.5.1 build 35138 latency=0 link=no multicast=yes wireless=IEEE 802.11bg resources: irq:43 memory:f1500000-f1501fff lspci 03:00.0 Network controller: Intel Corporation Centrino Wireless-N 1000 [Condor Peak]

  Read the article

• Need help with xorg.conf for dual Radeon HD6450 video cards with 4 monitors

  - by Eriks Goodwin-Pfister

  I am running 64-bit Ubuntu 13.10 with Unity and have dual (2) Radeon HD6450 video cards and 4 Hanns-G HL273 monitors. Each Radeon card is driving one monitor via DVI and the other via VGA. I am running the proprietary video drivers from AMD's web site: "amd-catalyst-13.11-beta V9.4-linux-x86.x86_64.run" I tried to use "amd-catalyst-13.12-linux-x86.x86_64.run" but could not get that newer version to install. What I need help with is how to "correct" my xorg.conf file and any other needed instructions to get all four of my monitors to work as a continuous desktop that allows me to drag things from one monitor to the next, etc. When I tried to use the default open source drivers that came in Ubuntu 13.10, only three of the monitors would work. Now that I am running the proprietary ones, all four monitors come on and I can move my mouse from one end to the other--but only the right-most monitor displays my desktop and allows me to "do anything". Any time I move my mouse to any of the other three monitors (which display all-white), it turns into an "X" and does not do anything else but move. Enabling xinerama makes all four displays go all-black after login. I do have amdcccle installed, but it does not seem to have the ability to handle my particular configuration. My Current xorg.conf: Section "ServerLayout" Identifier "Basic Layout" Screen 0 "Screen1" 5760 0 Screen 1 "Screen0" 0 0 Screen 2 "Screen2" 3840 0 Screen 3 "Screen3" 1920 0 EndSection Section "Module" EndSection Section "Monitor" Identifier "0-DFP2" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1920x1080" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Monitor" Identifier "0-CRT1" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1920x1080" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Monitor" Identifier "1-DFP2" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1920x1080" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Monitor" Identifier "1-CRT1" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1920x1080" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Device" Identifier "Device0" Driver "fglrx" Option "Monitor-CRT1" "1-CRT1" BusID "PCI:1:0:0" EndSection Section "Device" Identifier "Device1" Driver "fglrx" Option "Monitor-DFP2" "0-DFP2" BusID "PCI:4:0:0" EndSection Section "Device" Identifier "Device2" Driver "fglrx" Option "Monitor-DFP2" "1-DFP2" BusID "PCI:1:0:0" Screen 1 EndSection Section "Device" Identifier "Device3" Driver "fglrx" Option "Monitor-CRT1" "0-CRT1" BusID "PCI:4:0:0" Screen 1 EndSection Section "Screen" Identifier "Screen0" Device "Device0" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Device1" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen2" Device "Device2" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen3" Device "Device3" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection

  Read the article

< Previous Page | 444 445 446 447 448 449 450 451 452 453 454 455  | Next Page >