Search Results

Search found 15913 results on 637 pages for 'screen'.

Page 448/637 | < Previous Page | 444 445 446 447 448 449 450 451 452 453 454 455  | Next Page >

  • Dual displays not working - NVidia - Ubuntu 12.04 - Second Monitor - Two Screens

    - by user75105
    Graphics Card: NVidia 460 GTX. Driver: NVIDIA accelerated graphics driver (version current) I have one DVI monitor, an old Dell LCD from 2005, and one VGA monitor, an Asus ML238H from 2010 whose HDMI port broke. The Asus is plugged into my graphics card's primary monitor slot and is the better monitor even though it is VGA but my computer defaults to the Dell. This happens when I boot as well; the loading screens, the motherboard brand image, etc. are all displayed on the Dell monitor until Windows loads. Then both monitors work. The same thing happened when I booted up Ubuntu 12.04 but I did not see the second monitor when the log-in screen popped up, nor did I when I logged in. I went to System Settings/Displays and my Asus monitor is not an option. I clicked Detect Displays and the Asus is not detected. I looked at the other questions regarding NVIDIA drivers and recalled my problems with Ubuntu a few years ago and decided to check the driver. I went to Additional Drivers to install the proprietary driver and it looks like it's installed and active but I'm still having this problem. There is another driver option, the post-release NVIDIA driver, but that does not fix the problem either. Also, under System Details/Graphics the graphics device is listed as Unknown, which might indicate that it is using an open source generic driver and not the proprietary NVidia driver. But under Additional Drivers it says that I am using the NVidia driver. Any help is appreciated.

    Read the article

  • Can we change control of two keys on keyboard?

    - by mr_eclair
    I'm using Eliteook 8440p hp machine and two keys on my keyboard aren't working v and b. laptop keyboard replace will take 2-3 days, and I can't stop my office work. I'm bored of using On screen keyboard to write v and b. I don't have any portable USb keyoard to connect to laptop right now. I'm thinking I'm not using Pg up and Pg Down button at all, is there any software or trick which can make it possible so that If i press Pg Up it will write v on page and Pg Down will write b. Hoping for quick and positive response.

    Read the article

  • Review: Logitech t620 Touch Mouse and Windows 8

    - by Tim Murphy
    It isn’t very often that I worry much about hardware, but since I heard some others talking about “touch” mice for their Windows 8 machines I figured I would try one out and see what the experience was.  The only Windows 8 compatible touch mouse that they had in the store was the Logitech t630 Touch Mouse.  At $69 it isn’t exactly a cheap purchase. So how does it work with Windows 8.  First it works well as a normal mouse with touch scroll capabilities.  Scrolling works both horizontally and vertically.  Then you get into to the Win8 features, all of which are associated with the back 2/3 of the mouse.  If you double-touch-tap (not depressing the internal button) it acts as a Windows home screen button.  The next feature is switching applications.  This is accomplished by dragging a finger from the left edge of the mouse in.  Bringing up the Windows 8 open apps list is the same movement as on the table where you drag in from the left and then move back to the right.  The last gesture available is to bring up the charms.  This is performed by dragging in from the right side of the mouse. There is a certain amount of configurability.  You can switch dominant hand configuration as well as turn on and off gestures as shown in the screenshot below. It is nice that they kept the gestures similar to the table gestures.  Hopefully future updates to the drivers will bring other gestures, but this is definitely a good start.  It would be interesting to also compare this to the Microsoft Touch Mouse and see if there are additional gestures such as app close and for the app bar. del.icio.us Tags: Logitech,Windows 8,Win8,t620,Logitech t620 Touch Mouse,Gesture

    Read the article

  • LiveCD not booting/can't install Ubuntu 11.04

    - by user20318
    So, i got a new laptop somedays ago and as usualy, i went formated it to install Ubuntu. Download 11.04 and burned it on my pendrive using my old laptop (running 11.04). When i tryed to boot from the LiveUSB on my new laptop, it just showed me some weird graphics and if i select any option (can't see what im selecting), it gives me a black screen and that is all. Then i tryed to boot with this LiveUSB on my old laptop, and it worked just fine ._. Burned a CD with Ubuntu 11.04 (64bits) and the problem continue. Then i tought it could be my CD Driver, since the laptop is new and all... burned a Windows 7 64 bits DVD and it worked just fine. Also, if i check the CD/Pendrive inside Windows Seven, all the files there are ok. Anyone have any idea of what can be? I found lots of questions about this, but none of them had the weird menus i'm getting ._. oohh... i also get a "prefix is not set" before the weird menu appears :S My sis specs: Intel Core i5 2400 Intel HD 3000 4gb DDR3 If anyone can help, i will be really greatfull ._.

    Read the article

  • How to stop live network traffic displayed in terminal?

    - by Jakobud
    For our network we are working on building a new firewall box and we just installed Smoothwall on it to test it out. When I start up the box, before the login prompt even appears, all of the live IP traffic is appearing in the terminal (source/destination IPs, MACs, Ports, etc). I wait for the boot sequence to finish, but all I see is this IP traffic. The login prompt never comes up. I finally get sick of waiting and press CTRL + C and it says "Entering Run Level 3" and then I get a login prompt finally. Once I login, the IP traffic continues to fly through the terminal even as I'm trying to type commands. How do I turn this stuff off? Is this the default setting for Smoothwall to have all this IP traffic going by on the screen? It essentially renders using the terminal to being useless.

    Read the article

  • $DISPLAY dependent gtk themes

    - by Vlad Seghete
    I have a computer at home that I log into remotely. The "monitor" for it is a TV, so I want gtk applications to use a large font and icon theme, which I managed to do by editing the ~/.gtkrc-2.0 file and some other similar stuff. What I want to be able to do is have a separate theme for when I'm logging in remotely. The best way to explain is that I would like my gtk theme choice to be dependent on the X display that the application is started on. For example, if I start something on :0.0 then that is the TV and I want large fonts, but if I start it on localhost:10.0 I want to use a regular size font, because it will get rendered on my laptop screen. The elegant solution would be to have some sort of IF statement in the .gtkrc-2.0 file that checks the $DISPLAY variable and behaves accordingly. The problem is I can't find any documentation on control structures in .gktrc files, or if it's even possible to do that.

    Read the article

  • ATI Radeon Drivers works with which linux distribution and version? [closed]

    - by amit.codename13
    I have ATI Mobility Radeon HD 5850 graphics card. Almost every new linux distribution seems to have an issue with it, when i install the drivers. Working without utilizing the graphics card leaves me so unproductive. So i made a plan to use older versions of linux, any distribution suitable as a desktop distribution. The problems that i am facing are, 1) After installing drivers the system boots and hangs, 2) There are unusual lines over the screen 3) After upgrade system doesn't start properly(hangs the usual old way) The kind of answers i am looking for is, distribution X(the newer the version the better) doesn't have the above problem after installing drivers for ATI Mobility Radeon HD 5850 graphics card. UPDATE: The new drivers released by AMD seems to fix all the issues, although they are still beta

    Read the article

  • Approaches for a clickable map of nations (such as a Risk game) with Spritekit

    - by Vukovitch
    I would like to create a political map where each country is clickable by tapping but I'm not sure the best way to determine which nation was selected. Imagine Risk where each country can be individually clicked to bring up additional information. My current approach is to make a sprite for each nation where every image is the size of the screen The images are mostly transparent except for the country, that way when all of the images are displayed the countries are in the correct place relative to one another. To determine if a click occurs on an individual country I look to see if the tapped location is a non transparent pixel and check that the sprite's name is one of the countries. Additionally the nation needs to glow or something when tapped as an indicator, however my current solution is yet another sprite that is displayed. This seems like a terrible approach and I was wondering what other solutions might achieve the same results. I'm pretty new to SpriteKit so I'm not entirely sure. The other idea I had was creating a single texture where each country is a different shade of gray, then when I get the tap location I do a lookup on the color at that location and get the corresponding country. However, I'm not sure how to create a hilight or glowing country effect with that method.

    Read the article

  • Ubuntu 9.10 freezes when HDMI port is connected

    - by Felipe Hummel
    I have a Sony Vaio FW350 with a HDMI output. I'm trying to use it under Ubuntu 9.10 with a LG LCD monitor 21,5'. The laptop has a Intel 4500 video card. I've tried two approaches: Boot the laptop with the HDMI cable connected and monitor turned on. Result: LCD Monitor keeps turned on but the whole screen is black and Ubuntu do not seem to be initializing. Boot Ubuntu until the end. I then connect the HDMI cable into the Laptop. The mouse and the whole system freezes. In both cases the only way to turn off the laptop is holding the power button. I've looked around the internet for similar problems, but only found workarounds for the same problem with VGA input, not HDMI. I also tried to use metacity before connecting the cable, but still got the same result. Any hints?

    Read the article

  • "Tail" a logstash server query

    - by phatmanace
    Assuming I have a logstash server chocked full of logs being loaded regularly, is there a reasonably elegant way that I can tail the results of a continuously executing query on the logstash server and show this in a terminal window e.g some-special-logstash-command.sh | egrep -v "(searchword1|searchword2)" the idea being that the command pipes stuff out of logstash and to my grep query that filters and shows me the filtered output for. .. of course if there is a logstash command that can do the grep piece for me as well, then that works too :) motivation for doing this, is that assuming all of my events from my estate is being loaded into logstash, then would be nice to have a terminal window with a continuous tail of interesting events as they occur scrolling past the screen. -Ace

    Read the article

  • Authentication error in LTSP client

    - by sat
    I am building a LTSP server with LDAP authentication for LTSP Clients. I have configured LDAP server also. When I try to login from LTSP client in GUI, I am getting No response from server, restarting. Then, It's restarting the GUI and comes to the login screen again. I thought that there could be a problem with LDAP authentication. But, When I try to login from Alt+Ctrl+F1 terminal in LTSP client, it is logged in successfully with LDAP user. LDAP Server and authentication is working fine. Even, after executing the below commands, still I am getting the same error. ltsp-update-sshkeys ltsp-update-kernels ltsp-update-image --arch i386 Whether I need to configure anything for GUI login from LTSP Client? How to fix this issue?

    Read the article

  • How do I upgrade from ubuntu 9.10 to 12.10 on my Acer Aspire 3000

    - by 770
    I had my Acer Aspire 3000 as a dual boot XP/ubuntu 9.10 a couple years ago. I recently blew the dust of it and wanted to upgrade to 7/Ubuntu 12.10 so I began by formatting the Ubuntu side of the partition and apparently damaged the mbr as I could only get black screen with the error message: GRUB loading. error: no such partition grub rescue I then slaved the hdd to my win7 desktop and formatted the entire drive, both sides of the partition then reinstalled it in the Acer and tried to install win7. Upon starting the Acer I got the same error message: GRUB loading. error: no such partition grub rescue I then tried to reinstall Ubuntu 9.10 as I have an Ubuntu produced installation cd. Same result. Next day I received a new battery I had ordered for the Acer. I plugged it and the power supply in and hit the power button just to see if I at least could charge the battery but to my surprise Ubuntu 9.10 began to install, so I let it and it did. Now the hard drive shows 58 gb and 2.5gb partitions neither of which is formatted NTFS for/by windows. I am guessing that the GRUB/mbr was repaired somehow by the Ubuntu reinstallation. My question, should you choose to accept it; How can I get to my goal of dual boot win7/Ubuntu 12.10. I am a beginner and don't know much about linux or the terminology. Thank you for your thoughts and help.

    Read the article

  • Synergy configuration with multiple X screens

    - by Rob Drimmie
    I'm having a problem figuring out how to configure synergy to behave on a system with multiple X windows. On my desktop I am running Ubuntu 10.04 LTS. I have two monitors, setup as separate X screens by preference as well as to enable me to rotate the left-hand monitor. I also have a laptop, which I have on the desk in front of me, lower than the other two monitors. I have a very simple synergy.conf: section: screens desktop: laptop.local: end section: links desktop: down = laptop laptop: up = desktop end It works, but on the desktop only on whichever screen I run synergys from in terminal (I haven't set it up to run at startup yet because I've been playing with the configuration). I can't find any information how to reference multiple screens on one system, and would appreciate any help.

    Read the article

  • X crashes and GNOME loses all its configuration

    - by Oli
    About every 3 days on my desktop (always on), X crashes, gdm restarts and it dumps me at a login screen. When I log in Gnome appears to have lost a lot of its settings: it plays sounds in weird places, UI elements look like they're from the 90s (GTK+ defaults) and it's generally pretty hideous. Note everything works fine. It's not like my profile doesn't exist because I can browse the internet fine (Firefox knows my bookmarks, history, passwords, etc) and my desktop is unscathed (apart from the icon theme). Manually restarting gdm doesn't fix this. I have to do a full reboot. Now I'm almost certain that this is a nvidia issue causing X to baulk (I've seen similarish threads on nvnews) and I'm happy with that (my fault for running their latest drivers all the time). What I'm concerned about is why Gnome looks so fugly. Is there anything I can do to force it to reload its settings without restarting the whole computer. Restarting is an issue for me as I run several daemons that other computers on the network depend upon. This is what I mean by ugly/fugly... Look at that scroll bar!

    Read the article

  • Adding Internal DNS server in Host file

    - by Param
    I have added Global DNS server ip address to one of my Desktop ( please see the Network configuration screenshot ). and after that i have added my both domain controller ip address in host file, and it is working fine. ( please see the below screen-shot for your reference ) Can you please guide, what problem can i face if i kept my configuration in this way. but i am wondering, can this setting can create a problem? because the computer will be able to reach corp.abc.com easily, with the help of host file.

    Read the article

  • Resolution of monitor is not supported by motherboard

    - by Sandesh
    I have Desktop with configuration Pentium 4,945 intel chipset board,dual booting with win 7 and ubuntu 10.10 (no graphics card) Recently i purchased Dell IN2020M 20" with native resolution of 1600x900 but my display allow maximum of 1024x768 because of this when i play any video in full screen mode it doesn't play smoothly or frames are refreshed jerkily I have tried updating my VGA driver but its doesn't helping me much. Is there any way to solve this problem ? 1if i want to replace monitor what maximum resolution should i buy ? 2if i want to upgrade(graphics card/motherboard) my desktop what is the minimum configuration to support the current system. Thanks in advance

    Read the article

  • Unable to start Ubuntu 12.04. The system is running in low-graphics

    - by kaleidoscpicsoul
    I am a newbie to Ubuntu. I installed Ubuntu 12.04 using a USB Stick and it was running all fine for a few weeks and this error popped up. According to one of my friend, the best way was to re-install Ubuntu. Being from a non unix background i thought the same too and after the second install it happened again, but only this time was much quicker, in 3 days. I don't want to re-install Ubuntu every time this happens. I am a complete newbie to Linux which means that i am really bad at using terminal. I know there are other people who fixed this issue using this very same forum, but unfortunately the answers provided are too complex for me to understand. Please let me know how to do this. Things I want to let you know: I would need help step by step if that is alright with you. After i get the error i get the options and i click exit to console login I get the following message in a black screen (which i think is a command line sort of thing): * Stopping save kernel messages [OK] apache2: Could not reliably determine the server's fully qualified domain name,using 127.0.1.1 for ServerName [OK] * Starting web server apache2 and a blinking cursor. So basically it looks like a dead end for my non unixy eye. And one final thing is before this issue had happened i had tried configuring Python to Apache2. For that i had uninstalled and installed LAMP server several time and edited the configuration files too. I don't know if this really is a concern, but I don't know.. I have a USB with Ubuntu 12.04 in it so i can install it anytime. (But i want to know what the issue is rather than running away) . I migrated to Ubuntu from Windows and i have no plans to go back. I think that's from my side. Please let me know if there are any questions.

    Read the article

  • Windows 7 RDP Fullscreen mode

    - by kubal5003
    I have a problem with remote desktop connection in Windows 7. When I connect to remote computer I would like to switch to fullscreen like I did in previous versions - just by clicking maximize. When I was in fullscreen mode and I moved the mouse to the upper border of the screen a nice bar appeared and I could minimize rdp or close it. In Windows seven when I click on the maximize button the window maximizes like a normal window - menu start/taskbar(whatever you call it) is still visible and because the resolution of the rdp client desktop is set like on the computer that I'm using it's not fully visible and scrollbars appear. That's really annoying. Can anyone tell me what to do? Is it a bug or maybe there is a "magic shortcut" that is poorly documented and does the trick? (I was trying to find it myself first ofcoz, but no result)

    Read the article

  • Can I get 4 screens running on an ATI Radeon HD 5700 series video card?

    - by Wayne
    I have successfully run 3 displays using the 5700, but i want to run a 4th screen off the HDMI Port. Mainly I would like it to Mirror the primary monitor onto the TV connected to the HDMI Port. Any help at all would be greatly appreciated. I can get a signal to it, i just have to disable one of my original 3 monitors. Im not willing to do that. So other than disabling one of my monitors, does anyone have any suggestions?

    Read the article

  • ADF - Now with Robots!

    - by Duncan Mills
    I mentioned this briefly in a tweet the other day, just before the full rush of OOW really kicked off, so I though it was worth re-visiting. Check out this video, and then read on: So why so interesting? Well - you probably guessed from the title, ADF is involved. Indeed this is as about as far from the traditional ADF data entry application as you can get. Instead of a database at the back-end there's basically a robot. That's right, this remarkable tape drive is controlled through an ADF using all your usual friends of ADF Faces, Controller and Binding (but no ADFBC for obvious reasons). ADF is used both on the touch screen you see on the front of the device in the video, and also for the remote management console which provides a visual representation of the slots and drives. The latter uses ADF's Active Data Framework to provide a real-time view of what's going on the rack. . What's even more interesting (for the techno-geeks) is the fact that all of this is running out of flash storage on a ridiculously small form factor with tiny processor - I probably shouldn't reveal the actual specs but take my word for it, don't complain about the capabilities of your laptop ever again! This is a project that I've been personally involved in and I'm pumped to see such a good result and,  I have to say, those hardware guys are great to work with (and have way better toys on their desks than we do). More info in the SL150 (should you feel the urge to own one) is here. 

    Read the article

  • Bad password when logging in via Remote Desktop

    - by Shiraz Bhaiji
    I have just setup a windows 2003 server running in hyper-V. When I log in via Hyper-V it works fine. When I try to login via remote desktop I get a bad user name or password error. I have: Disabled the firewall Enabled remote connections Before I did the above I did not get to the login screen. I can ping the ip address of the image. I am trying to login as Administrator. Anyone have an idea about how to fix this? Edit I have now managed to fix this by changing the password to something without special characters. Strange thing is the I could not see any problems with the passord, had tried typing it into the user name field to check it.

    Read the article

  • Altering the Windows 7 grouping thumbnail preview

    - by russ
    I like the windows 7 grouping behaviour for multiple similar windows, except when I have multiple Explorer windows open. In this case, showing thumbnails of each open explorer window is next to useless, and I would like to know how to either: Disable thumbnail display completely (but preserve the grouping behaviour) Disable thumbnail display for a subset of programs (all explorer.exe instances) Change the number of similar programs that are open before the grouping behaviour falls back on a more sensible text preview when hovering over the taskbar icon (currently 14 or over) I don't particularly want to disable any other features of windows to get this behaviour, so disabling the theme compleletely isn't what I want to do. I definitely want to keep the grouping behaviour. Its just those thumbnail previews I would like to alter. Here are some screen shots of what I don't want, and what I do want: http://dl.dropbox.com/u/13184372/StackOverflow/BadGrouping.png http://dl.dropbox.com/u/13184372/StackOverflow/GoodGrouping.png

    Read the article

  • I'm trying to setup Xvfb to run an GUI app on a remote server with no display

    - by jz87
    I have a 3rd party java app that I need to run on a remote server. Unfortunately, the app is designed for the desktop and assumes a GUI is available. The thing is I would like to leave this app running on the remote server without having to tie up my desktop machine with a persistent VNC connection to the remote machine. I'm trying to setup Xvfb on the remote machine so emulate a graphical environment, connect to the remote machine via VNC to launch the app and configure parameters and then log off and let it run. Here's what I have so far: I have ubuntu 11.04 server apt-get install xvfb apt-get install fluxbox apt-get install x11vnc Xvfb :1 -screen 0 1024x768x16 & fluxbox & At this point I run into a problem because it gives a very undescriptive error: Cannot connect to server. How do I know if the server is running and that it's running properly?

    Read the article

  • Motherboard or Processor Problem

    - by bradlis7
    My computer is broken, but I'm having trouble narrowing down the issue. I replaced the power supply, because I assumed that was the issue, but it has the same problem. The issue started with my computer starting the fans and running, but it didn't get to the BIOS screen for about 10 seconds. Now it refuses to do anything when the power button is pressed, except when I turn off the machine and take the processor out for 10-20 seconds, then put it back in, I came hit the power button immediately, and the fans start for 1/2 second, and quit. Does this sound like a is a processor or motherboard issue? I removed all components, so I know that the issue is with one of these two things.

    Read the article

  • Windows 7 Boot Loader - Remove 30 second waiting time

    - by derekhh
    I've installed Fedora 17 and Windows 7 on two different hard disks as a dual-boot system. The default boot loader is GRUB 2 maintained and configured in Fedora 17. When I startup and choose "Windows 7 bootloader (on /dev/sda1)" in GRUB 2, Windows 7 boot loader will appear, with only Windows 7 as the only choice and also the default operating system, with a 30 second waiting time if no input is detected. I'm trying to see if it is possible to remove this 30-second waiting time. I've tried to follow the instructions on the Web by configuring default operating system in the control panel but seems there is something wrong with it. I've also tried to use "bcdedit enum /all" but still receives error prompts. Update: Added my boot tab screen in msconfig.

    Read the article

< Previous Page | 444 445 446 447 448 449 450 451 452 453 454 455  | Next Page >