Search Results

Search found 14837 results on 594 pages for 'duplicate ip'.

Page 449/594 | < Previous Page | 445 446 447 448 449 450 451 452 453 454 455 456 | Next Page >

What is the best method to determine an account through DNS A record configuration?

- by Matt

I apologize if my description of the problem is unclear. I am working for an online CMS that allows external domains to be used similar to Tumblr or Flavors.me. I noticed both of these services simply require you to add an A record to your domain's DNS. When trying this, I added an A record for a blank name and "www" both leading to my webserver's IP. While this successfully routes to my server, it doesn't retain the used domain. This leaves me without any idea of what account they're attempting to reach at the application layer. I'm using nginx as my webserver. I have changed all the nameservers for a domain before, and that works properly, however that causes complications with other issues such as mail and isn't feasible on a scaled solution. What should I be doing here? Is the A record the correct method of accomplishing this? How are sites like Tumblr and Flavors.me determining which account is being referenced by the domain?

Read the article
How do I troubleshoot a page not found error when configuring IIS6 Windows Server 2003? [Page Not Found]

- by Vinicius Ottoni

I have configured IIS6 in my windows server 2003 with this link: http://www.simongibson.com/intranet/iis6/ After that I create a new web site inside Web Sites directory. Inside the physical path I created an index.htm that has: <html> <body>Test</body> </html> But I got the following error: "The page cannot be found". When I put the same index file inside the Web Site Default physical path, it works. I configured the new web site with the link above using the IP configuration and without a Host Header.' What should I do to troubleshoot this or is there an obvious configuration error?

Read the article
'IPv6' Newbie with IPv6 address assigment

- by Cute Puppy

I am new to IP v6 and I am looking to translate some existing private IPv4 addresses into v6 address assignment. Can someone please help me to answer/explain the questions below? If I have an v4 address of: 10.10.0.0/22 10.10.1.0/22 10.10.2.0/22 10.10.3.0/22 10.10.8.0/20 10.20.1.0/24 What will the new v6 address to be? I have been looking online @ http://www.subnetonline.com/pages/subnet-calculators/ipv4-to-ipv6-converter.php or other sites, Seems like they translated it directly to be: fe80::a0a:0 /118 fe80::a0a:100 /118 fe80::a0a:200 /118 fe80::a0a:300 /118 fe80::a0a:800 /118 fe80::a14:100 /120 Can someone please explain to me how we get to /118 from either "/22 or /24" (1. and 5) In addition, I would like to create the new private address based on the Unique local address "fc00::/16" How do I expand from there? Any help is greatly appreciated it!! Thanks,

Read the article
Reverse Proxy to filter out js files from multiple hosts in nginx

- by stwissel

I have a website http://someplace.acme.com that I want my users to access via http://myplace.mycorp.com - pretty standard reverse proxy setup. The special requirement: any js file - either identified by the .js extension and/or the mime-type (if that is possible) text/javascript needs to be served from a different location, a local tool that inspects the js for potential threats. So I have location / { proxy_pass http://someplace.acme.com; proxy_next_upstream error timeout invalid_header http_500 http_502 http_503 http_504; proxy_redirect off; proxy_buffering off; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; } location ~* \.(js)$ { proxy_pass http://127.0.0.1:8188/filter?source=$1; proxy_redirect off; proxy_buffering off; } The JS still is served from remote and I have no idea how to check for the mime type. What do I miss?

Read the article
Packets marked INVALID in FORWARD rule

- by Raphink

I have a firewall that has 3 IP aliases on 1 physical interface. Packets get dropped between these 3 interfaces (either ICMP, HTTP, or anything else). We tracked it down to these packets being marked INVALID in the FORWARD rule and dropped due to the this rule: chain FORWARD { policy DROP; # connection tracking mod state state INVALID LOG log-prefix 'INVALID FORWARD DROP: '; mod state state INVALID DROP; mod state state (ESTABLISHED RELATED) ACCEPT; } (That is, we see the INVALID FORWARD DROP logs in dmesg) What could be causing this?

Read the article
SFTP over double server hop

- by josh.trow

I'm trying to work out a method to allow me to access files on an SFTP server than I cannot access from my local machine. Currently, I have to SSH to a remote server (it is in a certain IP block that the final SFTP server will accept from), then from there SFTP to the destination server. From there, I get the files I am interested in, thereby dropping them onto the middleman server, from which I can get the files either over a Samba share or with a direct scp. I also work in the reverse, where I drop the files onto the middleman, SSH to it then SFTP to the destination and put them into the appropriate folders. My goal is to shorten this. The unfortunate restrictions are that my machine is Windows (I use KiTTy and/or Cygwin) and I cannot modify the middleman server (or destination server) in any way. I am willing to use command line or GUI programs so long as it works and is free. Any ideas?

Read the article
How to update debian dns server? New VM with same hostname as old VM

- by opensourcechris

We run several linux VM's on our Hyper-V cluster. Our old IT manager configured the dns server to resolve the url 'devlabs.ourdomain.com' to a debian squeeze apache webserver hosted on the hyper v cluster with the hostname: devlabs. We recently created a new Ubuntu vm to replace the original squeeze vm. When we created the new Ubuntu VM we used the same hostname of 'devlabs" to name the new VM. My problem is that now I am only able to access the new Ubuntu VM by using the IP address. How can I update our DNS server to point the url 'devlabs.ourdomain.com' to the new VM?

Read the article
Exchange and external mail server

- by Bahrain Admin

Hi, We have our domain hosted externally with Network Solutions, and our mail server is running from there. We have a branch office in Bahrain and have 3 users who would like to use their email addresses on a local exchange server running at the Bahrain office. The Exchange server is currently only used for internal mail,contacts and calendaring. I've used a third=party program to download the POP3 mail to their exchange accounts. so they can receive mail from outside. The issue is in sending mail using their external addresses. I've setup their exchange accounts to include their external address. But we get an error message stating that the IP is not authorized. I tried putting the local ISP as the smart host, but then we get an error message stating that the Address was rejected. I tried using our own external mail server as the smart host, but then the message "Relaying is denied" comes up. Any suggestions? Thanks Arun

Read the article
DNS point to server on ISP and keep shared host too?

- by Dwayne

I know this is probably quite easy to do, but I might just have the right search sorted out... so here is the situation: We have example.com set up as a hosted server along with app1.example.com, app2.example.com and a few others. What I would like to do is set up the right zone file to also make our internal server addressable from the outside world as internalapp.example.com. This server sits behind a firewall (pfsense) and is hooked up to the world via a cable modem that is technically on DHCP from our ISP, but has had the same external IP for the past 15 months so far. What would be the best way to set this up?

Read the article
Access to local network machine

- by Jirka Kopriva

I have granted new setting from my domain provider. Domain with specific port is pointing on computer in local network (fixed ip) like: mydomain.com:87 -> 192.168.1.1 Local machine is running on win server 2008. Everything works fine on local network. But mydomain.com:87 is not working. Are there extra settings for win server to allow connection from outside? (Firewall is turned off while searching for working result.)

Read the article
How to configure DNS BIND to work locally on one computer?

- by user619656

I want to do some changes to the BIND source code. In order to test those changes I want to be able to post queries to my local BIND server and for it to use only the local zone files. I know how to make the zone files and somewhat the named.conf file but what should i put in /etc/resolv.conf? In resolv.conf currently there is the line nameserver 192.168.0.1 witch i guess is my router IP address and the queries go through the router to my ISP. I want those queries to go to the local BIND server and to look for answers in the zone files i provided. Is there a way for this using resolf.conf file or should i do something else?

Read the article
How can I display host name on windows desktop

- by Martin

I do a lot of work on Windows Server 2008 remote desktops and often lose track of which host I am currently logged on to. Is there a way of displaying (without installing any non-standard apps) the host name or IP address of the host I am connected to in either the wallpaper or the notification area? I tried creating files in the desktop with the name of the machine - but my roaming profile shows the same set of desktop files on every machine, so that was scuppered. Duh! In shell windows this is easy: just set the prompt to display the host name. Surely there is a simple way of doing the same for the graphical desktop.

Read the article
Is Samba "remote browse sync" possible across OpenVPN tunnel?

- by John Reynolds

I'm connecting 2 TomatoUSB (Shibby build on WNR3500L v2) routers with an OpenVPN routed connection: ----------------------- ----------------------- | Router 1, subnet 20 | <--tunnel--> | Router 2, subnet 21 | ----------------------- ----------------------- Router 1 is the OpenVPN server and Router 2 is a client. Clients attached to the routers on both subnets can ping clients on the other subnet, so the tunnel and routing works. I've enabled file sharing on both, in order to get their Samba WINS servers running. Is it possible to get name resolution across the tunnel? I've tried remote browse sync = 192.168.21.1 in /etc/smb.conf on the server side, to no avail. Also tried using the IP adress that the client gets from the OpenVPN address pool (usually 10.8.0.something), but still no joy.

Read the article
How to put fear of God (law) into Wi-Fi hacking neighbors [closed]

- by Shakehar

I live in an apartment and some new guys have apparently moved into one of the apartments. They have been shamelessly hacking into my WiFi. Mine was initially a WEP encrypted network and out of laziness I just limited and reserved the IPS on my router for the people in my house. Yesterday I had to free up an IP for a guest in my house but before he could join the network these guys connected in. I have changed my encryption to WPA2 and hope they dont have the hardware/patience required to hack into it, but there are many wi-fi networks in my apartment most of which are secured using WEP. I don't really want to call the police on them. Is there any way to deter them from misusing other people's wi-fi ? I have gone through I think someone else has access to my wireless network. What next? but I have already taken the steps mentioned there.

Read the article
Lan DNS not working after reinstall of Ubuntu 13.10

- by DrorCohen

I upgrade my Ubuntu desktop to 13.10. When I say upgrade I mean installed on a new partition from scratch (old partition is available if To the problem: I'm trying to ping a host (Drobo-FS server) by it's host name. I get "Unknown Host". However pinging from another computer on the same lan - works fine (a laptop with 12.04 lts). for that matter every ping from the 13.10 to the local lan by hostname fails, ping with ip works. I don't have a local DNS server but somehow all the other computers in the network find each other by host name - only this new one fails... help appreciated...

Read the article
How to access MySQL on Windows

- by Dan

This may sound like a really dumb question, but I normally only deal with MSSQL, no LAMP stuff, so I'm struggling to figure out what's going on. I have Windows 7 and have installed MySQL 5.1 through Web Platform Installer. I have HeidiSQL installed to manage data in MySQL, but how do I connect? In Heidi it's asking for 'Hostname / IP' which is prepopulated with 127.0.0.1. It prepopulates the user field to 'root' (which is right) and I'm entering the password I chose when MySQL was installed. However, it just errors when I connect, saying: SQL Error (1045): Access denied for user 'root'@'localhost' (using password: YES). Can anyone point me in the right direction here? Many thanks...

Read the article
Windows 2008 server unaccessible without traces in the event log

- by Rob

I am trying to figure out why a Windows 2008 server became inaccessible in terms of RDP and access to a web application. The server was turned off and then on. Look at the event log at the time it went offline, I can't find anything. And looking at misc application logs, the system was running like normal after it went offline. It has to be said that by mistake the firewall was switched off earlier, so a lot of attempts had been done to access the SQL Server with the sa user as well as RDP login. But the attempts has been going on for days, so nothing new about that. Besides the event logs, is there anywhere else I can go to examine the cause of this? I am also in doubt whether or not a DOS attack or similar would show up in the event log. From a log for a backup application running on this server I can see that an attempt was done to access a remote IP after the server went offline, but got no connection.

Read the article
Can't see a Windows XP computer on the network

- by user56614

I have two PC's connected to the same router. One is running Vista Home Premium and the other is running XP Pro. I'm trying to reach the shares of second PC from the first PC. I've enabled file sharing on the XP PC, I've disabled firewall and defender, and I can successfully ping it from the Vista PC. Both computers are set to the same workgroup "WORKGROUP". However, if I try to type "\\192.168.1.2" in Windows Explorer (192.168.1.2 being the IP address of the XP PC), I get a message: "Windows can't access \\192.168.1.2... Error code: 0x80004005 Unspecified error". And If I type "net view \\192.168.1.2" in command prompt, I get "System error 53 has occurred. The network path was not found." Am I missing something trivial?

Read the article
Workaround for API limits [closed]

- by blunders

Problem: Planning on building out a client services company that requires access to APIs. Most APIs are limited based on user, IP, etc. - and even though the API calls would be on a per client basis, there's no way to get usage not tied to IPs. (Theoretical) Solution: Have each client install on their network a proxy/VPN that would allow my systems to connect and use their assigned usage. So, it's possible there's a better solution than the one I've thought of, but it's the only one I've been able to come up with.

Read the article
How to failover to local account on a cisco switch/router if radius server fails?

- by 3d1l

I have the following configuration on a switch that I testing for RADIUS authentication: aaa new-model aaa authenticaton login default group radius local aaa authentication enable default group radius enable aaa authorization exec default group radius local enable secret 5 XXXXXXXXX ! username admin secret 5 XXXXXXXXX ! ip radius source-interface FastEthernet0/1 radius-server host XXX.XXX.XXX.XXX auth-port 1812 acct-port 1813 key XXXXXXXXX radius-server retransmit 3 ! line con 0 line vty 5 15 Radius authentication is working just fine but if the server is not available I can not log into the router with the ADMIN account. What's wrong there? Thanks!

Read the article
VPN Configuration

- by Josh

How can I allow incoming connections on a Windows 7 machine that is connected to VPN? I have some services listening on certain ports that I have forwarded from my router. When the VPN is disconnected, I can connect to these services from my internal network as well as from the Internet without issue. When I connect my VPN however, I am still able to access the ports from my internal network, but not remotely. I think I need a split tunnel setup, and there is an option in the VPN settings to Use Default Gateway on remote network. I want this option enabled so all my traffic is routed through the VPN, but I want incoming connections to be allowed on my internal network IP from the Internet. Is there some hybrid way to set this up with routing?

Read the article
Remote Desktop Problem on Windows Server 2008 R2

- by lukiffer

Revised this question to be more concise, consolidating several revisions. Symptoms: From a domain-member Windows 7 Client: Domain credentials to a domain controller = success Domain credentials to a member server (by hostname or FQDN) = success Domain credentials to a member server (by IP) = fail Local credentials to a member server (by either) = success From a non-domain-member Windows 7 Client: Domain credentials to a domain controller = success Domain credentials to a member server = fail Local credentials to a member server = success (Identical behavior from a Mac RDC 2.1 client) Server Configuration Details: Windows 2008 R2 Datacenter w/ SP1 The domain in question is a subdomain of a Windows 2008 domain (forest root). Root has DCs in both Site A and Site B, subdomain only has DCs in Site B. RDP is operating normally on all root member-servers and DCs. No remote desktop settings are defined by GPOs. Network level authentication is enabled; all clients are compatible and the certificate exchange/SSL handshake completes successfully. Not catching any errors in netlogon log.

Read the article
Using nginx as a reverse proxy for tomcat results in new jsessionids for every ssl request

- by user439407

I am using nginx as a reverse proxy for a tomcat setup, and everything works fine for the MOST part, the only issue I am having is that every request to an http address results in a new JSESSION ID being created(this doesn't happen in http), here is the relevant part of the NGINX configuration: location / { proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Host $http_host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-Proto https; proxy_redirect off; proxy_connect_timeout 240; proxy_send_timeout 240; proxy_read_timeout 240; proxy_pass http://localhost:8080; } Any idea why I am constantly genning new jsessionids?

Read the article
User for Public Network

- by user71604

my computer can catch the signal for many Access Points for the same network, while the network has problem with internet connection in some APs and it's working in others "all APs have the same SSID" Please advice if as i user i can force my computer to connect with specific AP neither than to go with the one with higher power (through MAC adress or IP)?. I am sure that my computer catch more than 10 signals for APs"All with same SSID". I am using windows 7 home primume 64 bit. as a user i dont have access to the AP config.

Read the article
Setting up a transparent proxy with only one box.

- by Scott Chamberlain

I am playing around with transparent proxies, unfortunately I do not have two machines to test it out with. The current way I am doing things is the program makes a request to a computer on port 80, I use iptables -t nat -A OUTPUT -p tcp --destination-port 80 -j REDIRECT --to-port 1234 to redirect to my proxy that I am playing with. the proxy will send out a request to port 81 (as all outbound port 80 are being fed back in to the proxy so I want to do something like iptables -t nat -A OUTPUT -p tcp --destination-port 81 -j DNAT --to-destination xxxx:80 The problem lies with the xxxx part. How do I change the destination port without changing changing the destination ip? Or am I doing this setup completely wrong, I am learning after all and constructive criticism is definitely appreciated. The machine I am using is pretty low end so I would like not not have to create a VM with a second box unless absolutely necessary.

Read the article

< Previous Page | 445 446 447 448 449 450 451 452 453 454 455 456 | Next Page >