Search Results

Search found 3267 results on 131 pages for 'brian paul'.

Page 45/131 | < Previous Page | 41 42 43 44 45 46 47 48 49 50 51 52  | Next Page >

• Windows 7 hangs after going into sleep a second time

  - by Brian Stephenson

  I've searched everywhere around Google and can't figure out why this is happening so I decide to ask here to see if anyone has a problem like this. Like it says in the title, whenever I sleep ONCE I'm able to wake the system, but going back to sleep again AFTER waking up for the first time results in it hanging on no input and no output, with the fan spinning as fast as possible and alot of heat being spewed out by the fan as well. I've tried various things like setting all USB Hub Root's to not get switched off for power saving, disabling USB selective suspend, disabling PCI-e link state power management, and even unplugging ALL USB devices and it wont wake up after the second attempt. And I've even waited up to a full hour of the CPU fan spinning loudly and it's still stuck trying to wake up. The only USB devices I use are a Microsoft USB Comfort Curve Keyboard 2000 (IntelliType Pro) and a generic HID compliant mouse from Creative model number OMC90S "CREATIVE MOUSE OPTICAL LITE". My other devices like external drives and controllers are unplugged when I'm not using them as having too many USB devices plugged in at a time causes a deadlock on almost all of the ports I have. Here's my system specifications (Most of these are from CPU-Z): Brand: Gateway DX4300-19 Mainboard: Gateway RS780 Chipset: AMD 780G Rev 00 Southbridge: AMD SB700 Rev 00 LPCIO: ITE IT8718 BIOS: American Megatrends Inc. ver P01-A4 09/15/2009 CPU: AMD Phenom II X4 810 at 2.60 GHz RAM: 8.0 GB DDR2 Dual Channel Ganged Mode at 400 MHz GPU: ATI Radeon HD3200 Graphics Intergrated - RS780 OS: Windows 7 Home Premium x64 OEM (Acer Group) HDD: WDC WD10EADS-22M2B0 1.0 TB (Western Digital Green Caviar) My BIOS has absolutely no control over how I setup the sleep mode to be either S1 or S3. So I can't check these settings or even change them. Hybrid sleep is also disabled, I can successfully go into hibernation and wake from hibernation but this is painfully slow due to a harddrive problem I'm having with this "Green Drive". (Hibernation takes over ~3 minutes to complete) Any help would be appreciated, thanks.

  Read the article

• Mail server Backup script

  - by Paul Stevens

  Hello, Im looking for the best way to accomplish a full backup of our "vmail" accounts on our mail server (CentOS "iRedMail" 5.1). I also need to split on 4GB parts the resulting tar or bzip compressed backup, and get this DVD-RW burned, on same server. The idea is to get this procedure to running overnight, once a week. Our mail server holds about 45GB of information. I will appreciate any advise or help on this topic. Thanks.

  Read the article

• Can I use TCP as DNS query protocol on Mac OS?

  - by Brian

  Hi, I'm using Mac OS, Snow Leopard 10.6.2, and I'm suffering from UDP packet loss during DNS query. So I tried DNS query as TCP using dig command, it worked very well. However, I can't find some control switch to change to use TCP during DNS query. Is there a way to change it in Mac OS? Thank you.

  Read the article

• Can I use TCP as DNS query protocol on Mac OS?

  - by Brian

  Hi, I'm using Mac OS, Snow Leopard 10.6.2, and I'm suffering from UDP packet loss during DNS query. So my web browser is too slow to surf internet nicely. But it worked very well when I tried a DNS query on TCP using dig command. However, I can't find some control switch to change to use TCP during DNS query. Is there a way to change it in Mac OS? Thank you.

  Read the article

• Updated: NLB 2 Windows Server 2003 Servers - Looking to Hire SysAdmin to solve!

  - by Paul Hinett

  I need to configure windows NLB on 2 dedicated servers I have. My main machine has been running for some time, with several domain names pointing to the servers primary IP address. Both servers have 2 NIC's installed, and both have several secondary public IP addresses available if needed? What IP address would I use for the cluster IP, does this IP need to be added to the IP list of both public NIC's ip address list? What IP addresses do I use for the host's dedicated IP? Please help, this is driving me nuts...i've taken down the server twice on accident today! UPDATE: Looking to hire a windows SysAdmin to solve! I have updated my question, i would like to hire a trusted windows SysAdmin to take care of this for me, preferably today...can anyone help and provide some credentials please? Thank you in advance!

  Read the article

• Windows 7 dual boots after upgrade

  - by Paul

  I was running Vista 64, I installed (not upgraded, fresh install) Windows 7 64 bit on the same partition, but since then it's been bringing up a dual boot menu asking if I want to boot to 7 or Vista. Any way to get rid of that, I'm really not interested in rolling back.

  Read the article

• Windows 7 dual boots after upgrade

  - by Paul

  I was running Vista 64, I installed (not upgraded, fresh install) Windows 7 64 bit on the same partition, but since then it's been bringing up a dual boot menu asking if I want to boot to 7 or Vista. Any way to get rid of that, I'm really not interested in rolling back.

  Read the article

• Windows XP install driver notification for AirCard

  - by Brian

  A co-worker of mine is using an air-card. It prompted him to install software in the notification tray, but he clicked on the wrong thing and the icon went away without him installing that software. How can I get that icon back? He can't install the software then. I know that you can download the software from the site, but we did that and were having issues from that too. Restarting and trying again doesn't pop up the notification either. Thanks.

  Read the article

• Change Windows 7 Explorer's Details Pane limits

  - by Paul

  For some reason, MS decided to completely kill the status bar's functionality in Win7 (and maybe Vista, but I don't know for sure). I have tried all possible options such as Classic Shell and so on. Basically, the one thing I miss most is seeing at a glance the total size of my selected files. I know I can press Alt+Enter or whatever, but that's not the point. The point is that the so-called 'details' pane stops providing details if more than 15 files are selected! WTH? Cannot understand the reason behind such a stupid arbitrary limit, that doesn't seem to be user-configurable at all. Anyway, what I'm looking for is a way to change that limit, either via the registry or otherwise. If changing the limit isn't possible, would it be possible for some programming genius to create a very small optimized light-weight non resource-hungry (you get the idea!) program whose sole purpose will be to automatically click the "Show more details..." link in the details pane after every file selection? For bonus points, the program should wait for a second or two after file selection is complete to do this, so that selecting multiple files in quick succession doesn't hit the HDD repeatedly. Any takers for the challenge? :)

  Read the article

• Computer won't start unless power is removed for ~5 minutes

  - by Paul Tarjan

  I have a fairly standard 2-year old desktop computer (quad-core intel, single hard drive, decent video card, 300W power supply) which recently started acting up. I'm not sure what the cause is, so hopefully you can help. Sometimes (once a week-ish) I press the power button and nothing happens. No blinking, no sounds, no nothing. If I remove the power cord (or flip the switch on the power supply) I hear a capacitor discharge. If I leave it in the "no power at all" state for about 5 minutes then I can put the plug back in and the computer works perfectly. What is the issue? What do you think I have to replace?

  Read the article

• Is there an app for the Mac that shows you which apps are using the network?

  - by Paul D. Waite

  I use Menu Meters to show me how much data is being sent and received by my Mac as a whole. But (as far as I can tell), it doesn’t break it down by application. If there’s a lot of data being sent or received, it’d be nice to see which app is doing it.

  Read the article

• Pentium D & Intel Core 2 Duo

  - by Paul

  What's the difference between Pentium D and Intel Core 2 Duo?

  Read the article

• On WHM/cPanel how can you tell which packages are in use?

  - by Paul Masri

  I want to find out a) which packages are currently in use, and b) which accounts are using them, so I can do some housekeeping. If I go to 'Show Reseller Accounts', it'll list all the accounts by reseller and I can see which accounts use which, so I could go the longhand route of counting through them one by one, but I wondered if there's a way of getting a simple listing. NB: I've seen that if I go to 'Edit Reseller privileges & nameservers' for one of my resellers, I'll see a 'Package limits' table which has a 'Current' column that shows exactly what I'm looking for... but it's for that reseller only, and I don't get this table for resellers that have no package limits (e.g. me).

  Read the article

• Finding the most common errors in event logs using Powershell.

  - by Paul

  I have the event logs for one of our servers locally in .evtx format. I can load the log file into PS using the command: Get-WinEvent -Path D:\Desktop\serverlogs.evtx What I would like to do is on the Message field group events where the text matches by a certain percent (say 80% the same). As we have stacktraces for errors in the details which will be the same, but we also log the client's IP, url that was accessed which will likely be different. I want to group them so that I can work out the most common errors to prioritize fixing them and as there are 25,000+ errors in the log file I would rather not do it manually. I think I can work out how to do most of this, but am not sure how I could do the 'group fields which are mostly the same' part, does powershell have anything like this built in?

  Read the article

• Configuring network route between two routers on home network

  - by Paul

  I have a home network - the main router connected to the internet (and has wifi) is a Netopia box. Connected to it is a Linksys router. Everything currently works - I can connect via the wireless network and get to the internet. Machines connected to the Linksys can connect with each other and connect to the internet. Both routers are configured to serve addresses via DHCP (Netopia 192.168.1.1 - 192.168.1.99), Linksys (192.168.0.1 - 192.168.0.100). Here's how they are connected: Internet <-> Netopia w/wifi (192.168.1.254) <-> Linksys (192.168.0.1) I decided I really need to allow wireless connections to also communicate with machines behind the Linksys router. Currently the Linksys is configured to obtain an IP address via DHCP. I thought this would be straightforward. I configured the Linksys to have a static IP address: IP: 192.168.1.100 Mask: 255.255.255.0 GW: 192.168.1.254 Then I configured a static route on the Netopia: Network: 192.168.0.0 Mask: 255.255.255.0 GW: 192.168.1.100 So it should now look like this: Internet <-> Netopia w/wifi (192.168.1.254) <-> (192.168.1.100) Linksys (192.168.0.1) I reset both routers. I cannot ping the Netopia (192.168.1.254) from inside the Linksys network, and if I attempt to ping 192.168.0.1 from a wifi connection I get a "Destination host not available" error. Obviously I'm missing something, but I'm not sure where. Any ideas on what I'm missing?

  Read the article

• How to copy only VM changes in VMware to another physical machine

  - by Paul

  How can I use VMware Workstation to copy only changes to a VM to another physical machine, rather than recopying the entire VM every time? Can I just copy the snapshot files, if the second physical machine starts from a pristine copy of the VM? Would it be best to create a linked clone against the original VM, and then copy the linked clone directory each time? Does that even work? (I'm assuming I'll have to change the path in the VM's metadata file, since the paths will be different. I'm assuming I can't clone a linked clone w/o cloning the base.) Background: I and another developer with VMware Workstation are using VM's for systems development. I have to work from a home desktop. Transporting a multi-gigabyte VM either direction takes several hours at best. Downloading it is easiest, but that takes an hour to get it on a DMZ machine for download and then many hours to actually download.

  Read the article

• Computer won't start unless power is removed for ~5 minutes

  - by Paul Tarjan

  I have a fairly standard 2-year old desktop computer (quad-core intel, single hard drive, decent video card, 300W power supply) which recently started acting up. I'm not sure what the cause is, so hopefully you can help. Sometimes (once a week-ish) I press the power button and nothing happens. No blinking, no sounds, no nothing. If I remove the power cord (or flip the switch on the power supply) I hear a capacitor discharge. If I leave it in the "no power at all" state for about 5 minutes then I can put the plug back in and the computer works perfectly. What is the issue? What do you think I have to replace?

  Read the article

• XP Install Driver Notification for AirCard

  - by Brian

  Hello, A co-worker of mine is using an air-card; it prompted him to install software in the notification tray; he clicked on the wrong thing and the icon went away without him installing that software. How can I get that icon back? He can't install the software then... I know that you can download the software from the site, but we did that and were having issues from that too, was hoping to be able to install the sofware on the air card... Restarting and trying again doesn't pop up the notification too. Thanks.

  Read the article

• Is there any limit on the number of e-mails in a given folder with Courier IMAP?

  - by Paul Kroon

  I'm not running into a problem or anything, I was just curious about this when I saw I have 2 folders with around 20,000 items in each. Everything works fine (using Thunderbird), but I couldn't find anything with Google about this. Anyone ever heard of a limit on this with Courier IMAP?

  Read the article

• Apache Configuration Issue - website without www going to default site

  - by Brian

  I have included a copy of my virtual host file for apache below. (However I have hidden the ip address and domain name for now) My problem is that the following work: www.mydomainnamehere.org www.mydomainnamehere.com mydomainnamehere.com This one doesn't work: mydomainnamehere.org - instead of going to the document root listed below, it goes to the document root of the default site. What could be causing this? <VirtualHost [ipaddresshidden]:80> ServerAdmin [email protected] ServerName mydomainnamehere.org ServerAlias www.mydomainnamehere.org ServerAlias mydomainnamehere.com ServerAlias www.mydomainnamehere.com DocumentRoot /home/www/mydomainnamehere.org/html/ ErrorLog /home/www/mydomainnamehere.org/logs/error.log CustomLog /home/www/mydomainnamehere.org/logs/access.log combined </VirtualHost>

  Read the article

• Does putting the XFS log on an SSD significantly improve performance?

  - by Paul Wagland

  I have a five disk array running XFS in RAID5, and I would like to improve it's performance. I have seen some hints that putting the log onto a separate device can help, does putting the log onto an SSD help dramtically? In theory, it should, but I have not been able to find any case studies where someone has actually done this, and buying an SSD and then having it not work well would be inconvenient at best…

  Read the article

• Is it possible to have XP Mode in Windows 7 Home Premium?

  - by Paul

  I have Windows 7 Home Prem 32-bit with 2GB RAM. I have some older software that won't run so am wondering if i can run XP Mode? Is it only possible if you have Windows 7 Professional or Ultimate? If that is the case is there any other way to do something similar or will i need to install XP on another HD or partition?

  Read the article

• Standards for documenting/designing infrastructure

  - by Paul

  We have a moderately complex solution for which we need to construct a production environment. There are around a dozen components (and here I'm using a definition of "component" which means "can fail independently of other components" - e.g. an Apache server, a Weblogic web app, an ftp server, an ejabberd server, etc). There are a number of weblogic web apps - and one thing we need to decide is how many weblogic containers to run these web apps in. The system needs to be highly available, and communications in and out of the system are typically secured by SSL Our datacentre team will handle things like VLAN design, racking, server specification and build. So the kinds of decisions we still need to make are: How to map components to physical servers (and weblogic containers) Identify all communication paths, ensure all are either resilient or there's an "upstream" comms path that is resilient, and failover of that depends on all single-points of failure "downstream". Decide where to terminate SSL (on load balancers, or on Apache servers, for instance). My question isn't really about how to make the decisions, but whether there are any standards for documenting (especially in diagrams) the design questions and the design decisions. It seems odd, for instance, that Visio doesn't have a template for something like this - it has templates for more physical layout, and for more logical /software architecture diagrams. So right now I'm using a basic Visio diagram to represent each component, the commms between them with plans to augment this with hostnames, ports, whether each comms link is resilient etc, etc. This all feels like something that must been done many times before. Are there standards for documenting this?

  Read the article

• Is this video card good for 3 monitors? [on hold]

  - by Brian Briu

  Video card: http://www.amazon.de/Zotac-NVIDIA-GeForce-Grafikkarte-Speicher/dp/B00D4KCSHG/ref=sr_1_11?ie=UTF8&qid=1408575042&sr=8-11&keywords=grafikkarte 3 Monitors like this: http://www.mediamarkt.de/mcs/product/ASUS-MX-239-H,48353,462790,951629.html?langId=-3 If yes how can I connect them? If no, i'll buy one more video card like that. Also tell me what motherboard should I buy for these things + 32 ram and i7 (remember that in the future i'll buy one morre video card (to have 2). Power supply also?

  Read the article

• Does IIS Sometimes Allocate More Worker Processes Than Configured?

  - by Paul Williams

  We have an IIS 7.5 web service on Windows Server 2008 that handles WCF requests from C# clients. This service is configured to have Maximum Worker Processes = 1, so it is not a web garden. IIS is setup to recycle itself at the same time every day (3 AM). I am trying to debug gnarly connection issues, so I wanted to be sure the application pool was not recycling itself. I configured the pool to log an event when it recycles itself. To my surprise, I see the following entries in the System event log: Level: Information Date/Time: 3/23/2012 3:00:00 AM - Source: WAS - Event ID: 5076 A worker process with process id of '6636' serving application pool 'MyAppPool' has requested a recycle because it reached its scheduled recycle time. Level: Information Date/Time: 3/23/2012 2:59:39 AM - Source: WAS - Event ID: 5076 A worker process with process id of '9364' serving application pool 'MyAppPool' has requested a recycle because it reached its scheduled recycle time. IIS is correctly recycling the application pool at 3 AM. However, I do not understand why I would be getting two recycle events in the log within a few seconds of each other. The maximum number of processes is 1. Does IIS sometimes allocate multiple processes for an application pool that is specified as having 1 process? -- edit -- I connected at about 4 PM today and only saw 1 w3wp.exe process. There are no other event log entries that would indicate a crash.

  Read the article

< Previous Page | 41 42 43 44 45 46 47 48 49 50 51 52  | Next Page >