Search Results

Search found 1940 results on 78 pages for 'bulletin board'.

Page 45/78 | < Previous Page | 41 42 43 44 45 46 47 48 49 50 51 52  | Next Page >

• Motherboard max memory supported

  - by Ashfame

  I have an Intel DG965RY motherboard and its specification says it supports 8GB with 533 or 667Mhz RAM sticks and only 4GB with 800Mhz RAM sticks. I am running a 64bit OS. I earlier had 2 X 1GB sticks (800Mhz), so I bought 2 X 2GB sticks (800Mhz) and I underclocked them in the settings to run at 667Mhz. Shouldn't it support all 6GB RAM now? It would be a bummer if I will specifically need 667Mhz sticks thinking that at the worst they will underclock and then run at 667Mhz. I tried this because I saw someone posted at some forum that he put in 4GB+ of RAM in the same board @ 800Mhz and the system uses it all. In my case (On Ubuntu), it only shows 3.2GB as of now (link to Question) so needed to confirm if this is a hardware limitation.

  Read the article

• Computer freezes for 2+ seconds, mouse still moves

  - by xsaero00

  I have this problem on my workstation. The computer would effectively freeze for 2-5 seconds for no apparent reason, then continue as normal. While frozen the mouse would still be movable, but only on one of screens in my multi-screen setup. What can be the likely cause. System: CPU: i7-920 Memory: 12G of Patriot DDR3, 6 modules OS: SLED 11, Suse Linux Enterprise Desktop, using Gnome Main board: Asus P6T Video: two Nvidia 9500GT connected to three displays I am using memory at recommended settings of 8-8-8-1333. It has an XMP profile. Th CPU is a bit overclocked to 3.3 GHz, but my cooling more than allows for it. I ran the computer with all overclocks off and lower memory speed but the issue was still there. Any ideas? Where should I start looking?

  Read the article

• System fan connection on Mini-ITX server case and motherboard

  - by Robert

  The case: Newegg listing for Chenbro ES34169-BK-120 The motherboard: GIGABYTE GA-D525TUD (Newegg has it as well but I can't post more than one link due to being a new user) As far as the question, the system fan I have no idea how to get these to connect to the motherboard. There are two connectors which then go to extension fan cables. So when you connect these, it should be good, but the extension cables are two connectors that go to the system fans and a female molex connector (if you click the Chenbro listing, look at the 6th picture and you'll see the two connections being made and the molex connector just kind of hanging out in the case). Is there a piece I'm missing to get it to connect to the 3 pin sys_fan section of the board? Thanks,

  Read the article

• Laptop charger disconnects and reconnects, charger or battery broken?

  - by Rob

  I've got an Acer Aspire One netbook (AOA-150) and there's obviously something wrong with it. The charging port gets VERY HOT and the charger seems to disconnect and reconnect quickly sometimes. This only happens when the netbook is running, and it doesn't seem to care what it's doing other than being on. The battery has an extremely short life (< 30minutes, sometimes) and I almost exclusively run it on the power cable (which needs the battery plugged in. Having it just plugged into the wall won't start up). Does this sound like a problem with the power cable or the battery? The plug for the cable and the port get so hot that if I held them for longer than a few seconds, I'm sure I'd get burnt. EDIT Just got "Popular Question" on this and it WAS the power jack. The ground on it came loose from the board. A bit of solder on it and everything is working great again.

  Read the article

• Why does the EFI shell not detect my Windows DVD?

  - by Oliver Salzburg

  I'm currently looking into (U)EFI for the first time and am already really confused. I insert the Windows Server 2008 R2 Enterprise disc into the DVD-ROM and boot into the EFI shell. The shell will automatically list all detected devices, which are: blk0 :CDRom - Alias (null) Acpi(PNP0A03,0)/Pci(1F|2)/Ata(Primary,Master)/CDROM(Entry0) blk1 :BlockDevice - Alias (null) Acpi(PNP0A03,0)/Pci(1F|2)/Ata(Primary,Master) To my understanding, it should have already detected the filesystem on blk0 and should have mounted it as fs0. Why is that not happening? If I insert a USB drive, it gets mounted just fine. The board is an Intel S5520HC in case that makes a difference.

  Read the article

• Virtualizing OpenSolaris with physical disks

  - by Fionna Davids

  I currently have a OpenSolaris installation with a ~1Tb RaidZ volume made up of 3 500Gb hard drives. This is on commodity hardware (ASUS NVIDIA based board on Intel Core 2). I'm wondering whether anyone knows if XenServer or Oracle VM can be used to install 2009.06 and get given physical access to the three SATA drives so that I can continue to use the zpool and be able to use the Xen bits for other areas. I'm thinking of installing the JeOS version of OpenSolaris, have it manage just my ZFS volume and some other stuff for work(4GB), then have a Windows(2GB) and Linux(1GB) VM (theres 8Gb RAM on that box) virtualised for testing things. Currently I am using VirtualBox installed on OpenSolaris for the Windows and Linux testing but wondered if the above was a better alternative. Essentially, 3 Disks - OpenSolaris Guest VM, it loads the zpool and offers it to the other VMs via CIFS.

  Read the article

• One quarter of screen corrupted on MacBook Pro

  - by danyal

  I have a problem with my MacBook Pro's screen - here's a video: http://yfrog.com/4wm63z For those who prefer words, if you divide the screen vertically into 4 columns, the second column is corrupted (flickering, and discoloured, usually with yellow). I took it to an Apple store and they said it could be the screen or the logic board, neither of which will be cheap to replace. However, occasionally this problem will completely go away. So before I part with my cash, or decide to turn this into an overpriced media center for my TV... could the problem be a loose cable, or something else cheaper to fix?

  Read the article

• SATA drive not recognized when installing RHEL 5.1 on PowerEdge R410

  - by Rachel

  Here's my setup: Dell R410 with Perc S100 (software) raid controller on an Intel ICH10R chipset The first problem is that the Perc S100 is only supported on windows. I'm trying to install RHEL 5.1. It boots from the cdrom, but later the installer can't see the cdrom or hard drive. Both are connected to the on-board sata controller. The only options in the R410 bios for SATA are ATA or RAID. I don't need raid, I just want a single drive setup.

  Read the article

• Memeory Leak in Windows Page file when calling a shell command

  - by Arno

  I have an issue on our Windows 2003 x64 Build Server when invoking shell commands from a script. Each call causes a "memory leak" in the page file so it grows quite rapidly until it reaches the maximum and the machine stops working. I can reproduce the problem very nicely by running a perl script like for ($count=1; $count<5000; $count++) { system "echo huhu"; } It is independent of he scripting language as the same happens with lua: for i=1,5000 do os.execute("echo huhu") end I found somebody describing the same issue with php at http://www.issociate.de/board/post/454835/Memory_leak_occurs_when_exec%28%29_function_is_used_on_Windows_platform.html His solution: Firewall/Virus Scanner does not apply, neither are running on the machine. We can also reproduce the issue on other Developer Machines running XP 64, but not on XP 32 Bit. The guilty guy for the allocation is C:\WINDOWS\System32\svchost.exe -k netsvcs which runs all the basic Windows services. Does anybody know the issue and how to resolve it ?

  Read the article

• Choosing A Power Supply [closed]

  - by Geeks On Hugs

  Possible Duplicate: Power Supply Capacity Formula How can I check if my system needs more PSU power? I'm not sure if it's OK or not to ask a hardware question here. If not please let me know a good place but I've always got good info here so I thought I'd give it a shot. I'm custom building a new workstation for coding (Linux/Eclipse). How do I determine how much power the power supply needs? I'm building a mini ITX system on a budget and so I need to get as small as possible that is sufficient. I'll have a mini itx mobo with on board wifi and bluetooth, 8 GB RAM, an Intel i3 3.1 Ghz processor, 64 GB SSD and a slim optical drive. In the future I might add a descrete GPU, 16 GB RAM, 128 GB SSD. What is the minimum power I need and how do I calculate that?

  Read the article

• IDE to SATA convertor Motherboard Issue

  - by ravidev

  I bought new motherboard Intel DH67GD which has not IDE interface to attach the DVD writer. It has 2 SATA with 6Gb/s, 3 SATA with 3Gb/s and 1 e-SATA with 3GB/s.(mobo specs link : http://www.intel.in/content/www/us/en/motherboards/desktop-motherboards/desktop-board-dh67gd.html) Can anyone tell me how can i connect my old LG DVD Writer(IDE interface) with Mobo ?? Will IDE to SATA Connector work? If yes then how to connect that DVD writer with IDE-SATA converter? Please provide link. Thanks in advance !!

  Read the article

• Are there significant performance difference between chipsets?

  - by Let_Me_Be

  I wanted to build a single PC to fit all my needs, but since hardware virtualization support (Vt-d specifically) is a huge problem, I decided to build multiple single-use oriented computers. In this scenario I want these computers to be as minimal as possible. So the core of my question is: "Are there significant performance difference between chipsets?" I'm considering Sandy-Bridge i7 or i5 for my "game console" computer. And since I will use only one graphic card, one or two HDD, 4-8GB RAM and nothing else, I would be fine with a micro-ATX board with a Q67 (or some other low-end chipset).

  Read the article

• Mounting root failed. Dropping into basic maintenance shell

  - by vmsystem

  Hi, I have purchased AMD Phenom X4 955 3.2GHZ processor with supporting gigabyte GA-MA785GM-US2H mother board / 6GB DDR2 RAM / 500GB SATA drive for learning Vmware ESX 3.5 product. In the above configuration, I have installed windows xp 64 bit operating systems and continue to installed vmware workstation 6.5. From the VM workstation, I can able to install ESX3.5 update2, but I unable to start properly, please refer the below mention error. “Mounting root failed. Dropping into basic maintenance shell. To collect logs for VMware, connect a USB storage device and run 'bin/vm-support '. Machine will be rebooted when you exit from this shell.” The same was tested in the windows 2003 Enterprise Edition server / windows 7 32bit / windows 7 64bit also, Please help me to resolve the issue.

  Read the article

• How to fix: mac keyboard ignores "first" key pressed

  - by lexu

  UPDATE 2012.03.19: the MBP described in this post is now broken and recycled (logic board fried). The replacement doesn't manifest the same problems. I tend to believe the problem originated in the keyboard firmware of the old MBP. Every now and then, usually after I haven't pressed a key in some time, sometimes minutes, sometimes seconds, my MBP will "swallow" the the first key I press ... say I'm logging into "superuser.com" .. I start typing my username and the textbox will show "exu" instead of "lexu" This is driving me nuts! My guess is the keyboard or it's controller goes to sleep and fails to wake up propperly ... What can I do about this? PS: I've already installed "MacBook, MacBook Pro Keyboard Firmware Update 1.0"

  Read the article

• Is it possible to modify a color scheme and windows decorations in Xfce4?

  - by Juhele

  just testing PCLinuxOS Phoenix XFCE Edition 2011-07 which I would like to install on my grandpa's PC instead older PCLOS 2009 with KDE3 (which is almost impossible to upgrade). The PC is relatively older one (Sempron 2200+ CPU, MSI K7N2GM2 board with integrated GeForce 440MX series graphics, 1GB RAM and 80GB IDE HDD) and I thought that it is too weak for KDE4. I already used Xfce in the past (Sam Linux 2006 and 2007), but in new Xfce4 I am not able to somehow change the windows color scheme and the windows decorations - the settings manager offers me switching between preinstalled themes but it is possible to modify them with some GUI?

  Read the article

• How would you diagnose an integrated network card that doesn't show up on the device list?

  - by Tomer Gabel

  I've been setting up a server based around a Gigabyte GA-G33M-DS2R motherboard (G33, PCH9R with integrated Realtek 811B network device. I've enabled it in the BIOS, but it doesn't show up in the pre-boot PCI device list, isn't recognized by Windows (even after installing the chipset and networking drivers) and doesn't even show up via lspci. I've tried cycling power, disabling, cycling again, enabling, cycling again etc. to no avail. I'm sort of at a loss at this point; the board isn't under warranty anymore, but I'd rather not have to replace it. Any advice would be greatly appreciated...

  Read the article

• 4TB HGST SATA drive only shows 1.62 TB in Windows Server 2012

  - by user136085

  I'm using a Supermicro X9SRE-3F motherboard with the latest BIOS and 2x 4TB drives connected to the on-board SATA controller. If I set the BIOS to RAID and create a RAID 1 array, the array shows up in the BIOS as 3.6TB. However when I boot Windows (on a separate RAID 1 array), the 4TB drives show up individually in disk manager as 2x 1.62TB drives. I could use Windows 2012 to set up software RAID 1, but when I set the BIOS back to 2x individual drives, they still show up in Windows as 2x 1.62TB drives. How do I access the full capacity of these drives? Thanks, Brian Bulaw

  Read the article

• Is the 4-pin PSU connector required? (Trying to connect a PSU to a mini case.)

  - by Geeks On Hugs

  I am trying to build a computer, placing an ASUS P8H67-I DELUXE in a custom retro C64 case. The case is an extra small form factor which can accomodate the Mini ITX board, but requires an external power supply, similar to the power-bricks that laptops use. I am looking at different power supplies and like these, but cannot figure out whether/how to power this system because they provide a 24-pin connector, but the motherboard has a 4-pin connector as well. Is the 4-pin connector optional or is it required? If it is required, how can I provide power for this system?

  Read the article

• RAID 1 not performing as expected

  - by Faken

  I recently bought a new 320Gb hard drive for my computer to set up RAID 1 on it for some added security. Installation went as smooth as could possibly be (plug in power, plug in data cable, start up computer, Intel software recognized new drive, right click create RAID 1, done!). However, for some inexplicable reason, I seem to have strange test results when using BENCH32. On my old configuration, a single 7200 rpm drive, I achieved about 60 MB/s write and 70 MB/s read. With a new RAID 1 configuration, I would expect the write to be slightly diminished but read to be significantly improved (though not exactly double speed). However, with the new configuration, I am getting 90 MB/s write and only about 80 MB/s read. I should NOT be getting improved write performance, especially NOT better than read! What's going on? My system setup is: q6600 2.4ghz CPU 4Gb DDR2 667mhz RAM on board Intel ICH9R "RAID chip" 2x Seagate 7200 RPM 320GB drives in RAID 1 Widows 7 home premium 64-bit

  Read the article

• pinx 501 with print server - 10 licenses

  - by ra170

  I have pix 501 with only 10 licenses. I'm already approaching this limit, running 2 computers at home, 2 laptops, PS3, iphones, 2 web cams..not everthing is on all the time, but it's possible as I'm looking into adding a print server, so that I can print from anywhere in the house. So my question is, will the print server count as a connection towards the license? I think it will need default gateway, which in this case will be my pix 501. I've seen somewhere on some othee board saying, don't set default gateway in the print server to pix 501, but then how would that work? is there a work around? I don't need to print from VPN or from outside, just inside..

  Read the article

• What is a good motherboard for the Intel i7 series processor?

  - by jasondavis

  I am lost on choosing a good miotherboard at a decent price for my Intel i7-930 CPU. I have read bad things about all of them so far. Issues with RAM not working correctly, Windows not loading with USB keyboards plugged in and all kinds of nightmare stories. Here is my needs. - 6g/b SATA 3 - USB 3.0 - Cheaper is better - Support for up to 24gb of RAM, I will start out with only 12gb though - I will use 64bit v. of Windows 7 so the 4gb RAM limit should not be a problem from my OS - Should be able to boot even if I have a USB keyboard plugged in. If you have experience with a motherboard that meets these specs, please do tell about it. I appreciate any help, I am stuck right now on picking a good board.

  Read the article

• CPU Affinity on ARM processors

  - by dsljanus

  I am using some RaspberryPI boards for a data acquisition system. They are nice boards, with plenty of community support around them, but they are really slow. I am thinking of gradually replacing them with ODROID multicore boards, with the Samsung Exynos processors. I have some experience using taskset to set CPU affinity on my servers because I am always running Node.js applications that are by definition single threaded. Now, is it possible to do this on an ARM board? I do not see why it would not in theory, but I have doubts over how well it is going to work. Does anyone have experience with this kind of hack? Also, I would appreciate any comments about ARM CPUs and how they differ from x86.

  Read the article

• Remote access not working without connected monitor

  - by winSharp93

  I am trying to configure a Windows Server 2008 as a Home Server for my personal use (mainly for storing documents, hosting source-control, etc.). The "server" consists of an Intel Atom 2700DC board and an Intel SSD. Configuring remote access to the server, I am confronted with a very strange problem: As long as a monitor is connected to my server, remote access works without any problems. However, when no monitor is connected at boot-time, remote access simply won't work (I keep getting errors when trying to connect that the remote server was not found or that remote access is disabled). Windows definitely boots when no monitor is connected as I receive a message asking me whether to enter safe mode when booting after powering the server down by plugging the power cord. When I plug in a monitor after boot, it stays turned off and remote desktop connections still fail. Do you have any ideas about what I could try?

  Read the article

• BSOD when playing Portal 2 using ATI Radeon 4800 on H61M/U3S3 mobo

  - by Ben Walker

  playing Portal 2 will always give me blue screen of death, usually after about 10 minutes of playing. BSOD references atikmpag.sys. I have tried several updates for graphics driver and through ATI Catalyst Center. I have updated the motherboard BIOS. My RAM is OK. Nothing changes. I had previously run the game fine, then I removed my video card to use on-board graphics once, and after re-installing the video card, I get this problem every time. I am using: ATI Radeon 4800 ASRockH61M/U3S3 motherboard Windows 7 64-bit

  Read the article

• Creative software leftovers - ASIO error message

  - by Tony Patriarche

  I temporarily installed an old Creative Audigy 2 soundboard on my Vista x64 Home Premium computer. Bad idea! I uninstalled the board & all software visible on the control panel. Now, with one particular app. (Sibelius) I keep getting a start-up message "CTASIO Warning: Creative ASIO: there are no Creative audio products installed on the system that support ASIO". I offer this as a candidate for "Most useless message", but that's beside the point. I used a commercial registry cleaner (PC-Tools Registry Mechanic) and then edited the registry looking for "creative", "audigy" and "ASIO". After removing everything I could find, I still get the message. Any suggestions?

  Read the article

< Previous Page | 41 42 43 44 45 46 47 48 49 50 51 52  | Next Page >