Search Results

Search found 20336 results on 814 pages for 'connection strings'.

Page 45/814 | < Previous Page | 41 42 43 44 45 46 47 48 49 50 51 52  | Next Page >

  • Port forwarding + shared connection with Ubuntu

    - by Joey Adams
    Because my wireless router's ethernet ports are defective, I set up a shared wireless connection from my laptop (which has wifi) to my eMac (which does not) via a crossover ethernet cable. The laptop is behind a router as 192.168.1.131, and the eMac is behind the laptop as 10.42.43.1 . The laptop is running Ubuntu 9.10 (Karmic). I achieved the shared connection through NetworkManager Applet. I right-clicked on the network icon at the topright, went to Edit Connections, selected the Wired connection named "Auto eth0", clicked "Edit...", went to the "IPv4 Settings" tab, and selected the Method "Shared to other computers". The eMac can now access the Internet. Now I want to enable port forwarding. There's a game I want to play that needs port 6112 forwarded (both TCP and UDP) in order to host games. I set up the router to enable port forwarding for 192.168.1.131 (the laptop), but port forwarding still isn't available on the eMac. I suppose I need to pretend my laptop is a router and configure port forwarding on it, indicating that incoming connections to the laptop (192.168.1.131) should be forwarded to the eMac on the shared connection (10.42.43.1 ). Thus, packets coming into the router on port 6112 would be redirected to the laptop (by the router), then to the eMac (by the laptop). My question is, how would I do that on Ubuntu (in light of NetworkManager's presence)? Also, if I can't get this to work, does anyone mind hosting a comp stomp? :D

    Read the article

  • Ubuntu systematically losing wired connection

    - by Lukasz Baczynski
    I'm working on 11.10 for few recent days, everything was working perfect until today. Updated ubuntu (some certs were updates as far as i remember) and from this time, wired network stops working randomly and systematically. (All other pcs/macs work fine) From 192.168.0.9 icmp_seq=25 Destination Host Unreachable From 192.168.0.9 icmp_seq=26 Destination Host Unreachable From 192.168.0.9 icmp_seq=27 Destination Host Unreachable From 192.168.0.9 icmp_seq=28 Destination Host Unreachable From 192.168.0.9 icmp_seq=29 Destination Host Unreachable From 192.168.0.9 icmp_seq=30 Destination Host Unreachable From 192.168.0.9 icmp_seq=31 Destination Host Unreachable 64 bytes from 192.168.0.1: icmp_req=32 ttl=64 time=1003 ms 64 bytes from 192.168.0.1: icmp_req=33 ttl=64 time=0.496 ms 64 bytes from 192.168.0.1: icmp_req=34 ttl=64 time=0.576 ms 64 bytes from 192.168.0.1: icmp_req=35 ttl=64 time=0.522 ms 64 bytes from 192.168.0.1: icmp_req=36 ttl=64 time=0.624 ms 64 bytes from 192.168.0.1: icmp_req=37 ttl=64 time=0.625 ms 64 bytes from 192.168.0.1: icmp_req=38 ttl=64 time=0.555 ms It'll work for 20 seconds then it'll stop working for 10-30sec and so on. I've tried setting my router to give static IPs, it doesn't help. NOTHING has been changed since yesterday beside the package update... Here are other settings that may be useful: baka@baka-PC:~/Private/projects/wduk$ lspci -nnk | grep -iA2 net 06:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 06) Subsystem: ASUSTeK Computer Inc. P8P67 and other motherboards [1043:8432] Kernel driver in use: r8169 baka@baka-PC:~/Private/projects/wduk$ ifconfig -a eth0 Link encap:Ethernet HWaddr **Removed MAC address** inet addr:192.168.0.9 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::ca60:ff:fe0a:85b2/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:6400 errors:0 dropped:6400 overruns:0 frame:6400 TX packets:7085 errors:0 dropped:107 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:4191983 (4.1 MB) TX bytes:886881 (886.8 KB) Interrupt:72 Base address:0x2000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:2522 errors:0 dropped:0 overruns:0 frame:0 TX packets:2522 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1070130 (1.0 MB) TX bytes:1070130 (1.0 MB) baka@baka-PC:~/Private/projects/wduk$ cat /etc/resolv.conf # Generated by NetworkManager nameserver 8.8.8.8 thanks for help

    Read the article

  • dell vostro 1000 broadcom wireless connection

    - by lorrenuy
    I have a problem with the hardware broadcom wifi. I press the hotkey fn+f2 to activate the hardware and this will not work. I'll look at the drivers but it appears to be installed. How can I solve this problem? Ubuntu is all new to me so if possible, give me a clear explanation. Now do I connect the lan cable. I use the Ubuntu 11.10 lawrence@lawrence-Vostro-1000:~$ sudo lshw -class network [sudo] password for lawrence: PCI (sysfs) *-network description: Network controller product: BCM4311 802.11b/g WLAN vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:05:00.0 version: 01 width: 32 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=b43-pci-bridge latency=0 resources: irq:18 memory:c0200000-c0203fff *-network description: Ethernet interface product: BCM4401-B0 100Base-TX vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:08:00.0 logical name: eth1 version: 02 serial: 00:1c:23:a2:b9:a9 size: 100Mbit/s capacity: 100Mbit/s width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list ethernet physical mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=b44 driverversion=2.0 duplex=full ip=192.168.1.18 latency=64 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:21 memory:c0300000-c0301fff lawrence@lawrence-Vostro-1000:~$ lawrence@lawrence-Vostro-1000:~$ rfkill list all 0: dell-wifi: Wireless LAN Soft blocked: yes Hard blocked: yes

    Read the article

  • Minimizing data sent over a webservice call on expensive connection

    - by aceinthehole
    I am working on a system that has many remote laptops all connected to the internet through cellular data connections. The application will synchronize periodically to a central database. The problem is, due to factors outside our control, the cost to move data across the cellular networks are spectacularly expensive. Currently the we are sending a compressed XML file across the wire where it is being processed and various things are done with (mainly stuffing it into a database). My first couple of thoughts were to convert that XML doc to json, just prior to transmission and convert back to XML just after receipt on the other end, and get some extra compression for free without changing much. Another thought was to test various other compression algorithms to determine the smallest one possible. Although, I am not entirely sure how much difference json vs xml would make once it is compressed. I thought that their must be resources available that address this problem from an information theory perspective. Does anyone know of any such resources or suggestions on what direction to go in. This developed on the MS .net stack on windows for reference.

    Read the article

  • installed ubuntu 13.04 but no wireless or wired connection available

    - by James
    after having installed ubuntu 13.04 i can not connect to the internet wirelessly or wired? can only connect to internet by using "try ubuntu" via ethernet cable, ive tried seeking help in so many different ways yet getting no positive outcome at all, will someone please explain why i can only connect with ethernet while i have the cd in the tray? ive also tried downloading b43 drivers to connect to the internet but apparently i dont have enough disk space, what is going on here? i have the disk in the tray now at the screen where you can either try or install, if someone could give me a step by step from here it would probably cut out all this hassle of me not knowing whats going on

    Read the article

  • Attempting to install netgear N300 Wireless USB Adapter on Ubuntu without a present internet connection

    - by Liz
    Hello Linux/Ubuntu world out there. I don't have internet presently on the desktop I am trying to install the USB wireless adapter on. This seems to be the problem, which if the hardware would work would theoretically fix the problem. I can NOT access the internet via anything but wireless. I am presently on my laptop searching for answers while trying to install this little device. So any advice will have to take that into account. Now I have tried so far, using WINE which does not want to work, I have tried Windows Wireless Drivers which doesn't want to work, I have tried Software Sources, Other Software and it will not acknowledge the cdrom as a repository stating errors like E:Unable to stat the mount point /cdrom/ -stat (2: No such file or directory) However I can open the CD icon on my computer and access and browse the files. The computer can read the CD. I can read the CD. I've tried just plugging it in and seeing if the computer will automatically recognize the hardware, and go from there. That does not work either. I have tested USB port to just verify that the USB port works. It does. My laptop recognizes the hardware, and would easily install the software if I prompted it to. The difference is that my laptop is Vista, and I HATE Vista. Any tips, tricks?

    Read the article

  • 14.04 LTS, 32-bit, Software Updater error "Failed to download repository information: Check your internet connection"

    - by Lucas W
    There isn't much to say about this one: when I run Software Updater, I get the above error message. That can't be good. Interestingly, when I click on "Settings..." and then close the settings dialogue that pops up, all of a sudden Software Updater successfully finds updates and installs them. I thought I should bring this to the attention of the Ubuntu community. sudo apt-get update returns the following: W: Failed to fetch http://ppa.launchpad.net/deluge-team/ppa/ubuntu/dists/trusty/main/binary-i386/Packages 404 Not Found E: Some index files failed to download. They have been ignored, or old ones used instead. I have screen captures, but I don't have enough reputation points to post them.

    Read the article

  • Upgrade Ubuntu Server from 11.04 to 11.10 without internet connection

    - by Tony Marciano
    We have application software that really likes Ubuntu Server 11.10. I need to upgrade several 11.04 servers to this version. Two questions: The servers that need to be upgraded do not have Internet access in our datacenter due to security reasons. I need to download the updates/upgrades to a secure system and then transfer them to the datacenter servers for installation. Is anyone aware of the steps involved? How/where do I get the 11.10 updates from? I don't see an option on the Ubuntu site for downloading specific versions of the OS and/or upgrades.

    Read the article

  • Connection manager detects network but won't connect

    - by Carson Chittom
    I've just installed 12.04 on my home desktop. Because of where it's located, in order not to have my children tripping over cat5 cable, I've got a cheap 802.11n USB device plugged in, which uses a Realtek 8192CU chip. The house wifi is protected with WPA2. Ubuntu's Network Manager detects the network, but connecting to it just times out and asks for the password again. I'm sure I'm using the correct password. No other computers on the house network are having any difficulty. This device previously worked correctly with both Windows 7 and OpenBSD in the same machine. The linux-firmware package is installed (from the disc) at version 1.79, and /lib/firmware/rtlwifi/rtl8192cufw.bin is present. dmesg|grep rtl only shows the "loading firmware" message. I've tried Google, but I apparently can't find the right set of words to plug in, because I haven't found anything related (lots of "doesn't work at all," but nothing matching my circumstances). Any help would be greatly appreciated.

    Read the article

  • both IPV4 and IPV6 at the same time over DSL connection?

    - by namiheike
    Let me describe my situation: while I connect computer with the wire, I've got an IPV6 address automatically, there's a "Wired connection" tab in network manager, and I can access an website that support IPV6 (google,facebook,twitter...)with a hosts file, or use the proxy like google.com.sixxs.org But if I want to access the whole internet, I have to create a DSL connection with username and password that ISP gave me. BUT after I change my connection into this DSL connection, I cannot access website over IPV6, even there's the site's ipv6 address in /etc/hosts, then I realize that I lose my IPV6 connection, because the ping6 says connect: Network is unreachable. the problem is, there's no IPV6 tab or options about IPV6 in the configure of DSL connection. It feels like I can only use one connection at the same time, but the DSL doesn't support IPV6 and the wired connection doesn't support IPV4(I mean, there's no way to input the password the ISP gave me) maybe make somebody uncomfortable, but when I work in MS windows, there's no such problem, (maybe just feel like) I can access V4 and V6 at the same time. So how to solve with this? thanks a lot. I'm in 11.10 + gnome3

    Read the article

  • Problems with wired ethernet connection Ubuntu 11.10

    - by Andrew Fielden
    After some partition shuffling, I've got a problem on my 11.10 system. The wired ethernet interface fails to come up, although the wireless interface is working. I'm using NetworkManager. I thought this may be a problem with NetworkManager, so I checked the config files, which look ok. I then tried re-installing the package, but this didn't resolve the issues. I'm not sure at this point if the problem is due to software configuration, or a hardware problem. I've also tried the cable in other router ports, but same problem. The symptoms are:- System settings - Network reports that the cable is unplugged (it isn't) ifconfig reports the following eth0 Link encap:Ethernet HWaddr f0:4d:a2:a2:a7:fe UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:10 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:792 (792.0 B) TX bytes:0 (0.0 B) Interrupt:46 Base address:0xe000 My /etc/network/interfaces file has the following: auto lo iface lo inet loopback My /etc/resolv.conf file has the following: # Generated by NetworkManager The router's red light is on for this port dmesg reports ADDRCONF(NETDEV_UP): eth0: link is not ready

    Read the article

  • 10 GigE interfaces limits single connection throughput to 1 Gb on a ProCurve 4208vl

    - by wazoox
    The setup is as follow : 3 Linux servers with Intel CX4 10 GigE controllers and an X-Serve with a Myricom 10 GigE CX4 controller are connected to a ProCurve 4208vl switch, with a myriad of other machines connected through good ol' 1000 base-T. The interfaces are actually set up as 10 Gig, according to both the switch monitoring interface and the servers (ethtool, etc). However a single connection between two 10 GigE equipped machines through the switch is limited to exactly 1Gb. If I connect two of the 10 GigE machines directly with a CX4 cable, netperf reports the link bandwidth as 9000 Mb/s. NFS achieves about 550 MB/s transfers. But when I'm using the switch, the connection tops at 950 Mb/s through netperf and 110 MB/s with NFS. When I open several connections from 3 of the machines to the 4th, I get 350 MB/s of NFS transfer speed. So each individual 10 GigE ports actually can reach much more than 1 Gb, but individual connections are strictly limited to 1 Gb. Conclusion : the 10 GigE connection through the switch behaves exactly like a trunk of 10 1 Gb connections. That doesn't make any sense to me, unless HP planned these ports only for cascading switches or strictly for many-clients-to-single-server connection. Unfortunately this is NOT the envisioned setup, we need big throughput from machine to machine. Is this a not-so-known (or carefully hidden...) limitation of this type of switch? Should I suggest seppuku to the HP representative? Does anyone have any idea on how to enable a proper behaviour ? I upgraded for an hefty price from bonded 1Gb links to 10 GigE and see exactly ZERO gain! That's absolutely unacceptable.

    Read the article

  • Internet connection randomly drops out

    - by Dr_Bunsen
    Since a week or 2, I have this random network failures. No error pops up, the system says it's still connected to the internet(wifi and wired). The problem is, I can't connect to anything, even a ping google.com gives no feedback. And after many network-manager resets it will work again, for just a minute, and drop out again. I noticed that the /etc/resolv.conf contains this line: nameserver 127.0.0.1 I left out the "Do not edit" stuff, and after it worked for a second, this line is added: search lan When I change the nameserver to 8.8.8.8, I am still able to connect to anywhere. Does anyone got a clue what is happening here? I will provide any information asked. Thanks in advance p.s. I run Ubuntu 13.04 since lastnight(24-06-2013)

    Read the article

  • Accessing and controlling to the modem by ethernet connection

    - by iwd35
    I have a PC and I connectted to my modem (via ethernet cable). I want to prepare interface (VS2010) and I want to connect it and do the following: Modem access the admin page (IP: 192.168.1.1 password: admin password: admin) Wireless band (2.4GHz or 5GHz) changing Network mode (N-only, B/G/N- Mixed) changing channel changing (channel 1, 2,3, etc.) The project will be a desktop application. I will use VB .NET; modem model:cisco linksys wag320. How I can do it?

    Read the article

  • After upgrading to trusty, ALSA midi connection (aconnect) doesn't seem to work right

    - by SougonNaTakumi
    Previously in kubuntu 13.10 I was able to open vmpk or plug in a midi keyboard, and provided that TiMidity was running in server mode, I could run aconnect [keyboard port (129:0 for vmpk)] 14:0 aconnect 14:0 128:0 and I could play the keyboard and get sound. But now, a while after upgrading to trusty, I tried to do that, and didn't get any sound. TiMidity itself still plays files fine, but if I try to play them with aplaymidi, I still just get silence. Oddly, the midi files are clearly being read. When I ran (where 130:0 was vmpk's input port) aplaymidi -p 130:0 ~/path/to/midi.mid vmpk was highlighting notes on the piano as if it were playing the midi. One time I tried this, TiMidity (?) very briefly played a fraction of a second of the first chord of my song before everything went silent and vmpk just highlighted the first voice on the keyboard as usual. Now the weirdest part of this is that probably about 40% of the time, when I've played at least one note with either aplaymidi or vmpk, when I run aconnect -x I get a sudden burst of a note or chord from my speakers (that is, if I played one note, I get a note; if I played multiple sequential notes, they turn into a chord), as if the notes were being queued up but not being played and that somehow liberated them. I have no idea what's going on there. A little while ago I remember having a problem with Audacity playing wav files sped up and also locking up if I tried to pause it, which it stopped doing when I set the audio devices to the actual audio devices rather than pulse. But now when I checked again, it's doing the opposite: it won't play audio at all and/or acts weirdly if I don't set the audio devices to pulse, and either way will very occasionally randomly do the speeding up thing regardless. Oddly in the midst of what's looking like a pretty screwed up sound system, sound in VLC and Firefox has been working fine and if I play a wav file with aplay ~/path/to/sound.wav that works fine too. Any idea what I could do to figure out what's wrong with ALSA and/or fix it?

    Read the article

  • BCM2046B1 Bluetooth Dongle connection problem

    - by Andfoy
    Well i have a Blueooth dongle with an BCM2046 IC intrregated, my problem is that when i connect it, Ubuntu recognize it, but it don't work whe i try to scan or scan the PC from other device, i replaced the default Gnome Bluetooth manager and i installed Blueman, but the problem presists. The Bluetooth LED indicator appears to be "working". I'm using 11.10 Oneiric Ocelot hcitool dev: Devices: hci0 89:21:XX:XX:XX:XX lsusb: Bus 002 Device 003: ID 0a5c:4500 Broadcom Corp. BCM2046B1 USB 2.0 Hub (part of BCM2046 Bluetooth) Bus 002 Device 004: ID 0a5c:2100 Broadcom Corp. Bluetooth 2.0+eDR dongle hciconfig -a: hci0: Type: BR/EDR Bus: USB BD Address: 89:21:XX:XX:XX:XX ACL MTU: 1017:8 SCO MTU: 64:0 UP RUNNING PSCAN ISCAN RX bytes:1329 acl:0 sco:0 events:40 errors:0 TX bytes:671 acl:0 sco:0 commands:35 errors:0 Features: 0xff 0xff 0x8d 0xfe 0x9b 0xf9 0x00 0x80 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: RSWITCH HOLD SNIFF PARK Link mode: SLAVE ACCEPT Name: 'ubuntu-0' Class: 0x4a0100 Service Classes: Networking, Capturing, Telephony Device Class: Computer, Uncategorized HCI Version: 2.0 (0x3) Revision: 0x4000 LMP Version: 2.0 (0x3) Subversion: 0x430e Manufacturer: Broadcom Corporation (15) Sorry for my English and thanks for any hints.

    Read the article

  • No wireless connection using a conceptronic c54i (RT2561/RT61 rev B)

    - by jrosell
    Detected but not working. New install on ubuntu 11.10 using coneptronic C54Ri. As documentation says it uses Ralink drivers.... Any ideas why my wireless does not work? $ lspci -nn | grep -i 'ralink' 01:05.0 Network controller: Ralink corp. RT2561/RT61 rev B 802.11g ifconfig eth0 Link encap:Ethernet HWaddr 00:1e:90:e5:af:13 inet addr:192.168.0.197 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::21e:90ff:fee5:af13/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:28361 errors:0 dropped:0 overruns:0 frame:0 TX packets:16858 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:39812172 (39.8 MB) TX bytes:1633405 (1.6 MB) Interrupt:43 Base address:0xc000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:80 errors:0 dropped:0 overruns:0 frame:0 TX packets:80 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:6608 (6.6 KB) TX bytes:6608 (6.6 KB) iwconfig wlan0 wlan0 IEEE 802.11abg ESSIDff/any Mode:Managed Access Point: Not-Associated Tx-Power=0 dBm Retry long limit:7 RTS thrff Fragment thrff Power Managementff lsmod | grep rt rt61pci 27493 0 crc_itu_t 12627 1 rt61pci rt2x00pci 14202 1 rt61pci rt2x00lib 48114 2 rt61pci,rt2x00pci mac80211 272785 2 rt2x00pci,rt2x00lib cfg80211 172392 2 rt2x00lib,mac80211 eeprom_93cx6 12653 1 rt61pci parport_pc 32114 1 parport 40930 3 ppdev,parport_pc,lp lsmod | grep rt [ 2497.816989] phy0 -> rt2x00pci_regbusy_read: Error - Indirect register access failed: offset=0x0000308c, value=0xffffffff [ 2497.827112] phy0 -> rt2x00pci_regbusy_read: Error - Indirect register access failed: offset=0x0000308c, value=0xffffffff [ 2497.837430] phy0 -> rt2x00pci_regbusy_read: Error - Indirect register access failed: offset=0x0000308c, value=0xffffffff [ 2497.847528] phy0 -> rt2x00pci_regbusy_read: Error - Indirect register access failed: offset=0x0000308c, value=0xffffffff [ 2497.847632] phy0 -> rt61pci_wait_bbp_ready: Error - BBP register access faile d, aborting. [ 2497.847637] phy0 -> rt61pci_set_device_state: Error - Device failed to enter state 4 (-5). sudo lshw -C network *-network DISABLED description: Wireless interface product: RT2561/RT61 rev B 802.11g vendor: Ralink corp. physical id: 5 bus info: pci@0000:01:05.0 logical name: wlan0 version: 00 serial: fa:b8:14:58:62:35 width: 32 bits clock: 33MHz capabilities: pm cap_list ethernet physical wireless configuration: broadcast=yes driver=rt61pci driverversion=3.0.0-12-generic firmware=0.8 latency=0 link=no multicast=yes wireless=IEEE 802.11abg resources: irq:16 memory:fdef8000-fdefffff iwlist scan lo Interface doesn't support scanning. eth0 Interface doesn't support scanning. wlan0 Failed to read scan data : Network is down uname -mr 3.0.0-12-generic i686 Edit 1 $ rfkill list all 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no On reboot, sudo lshw -C network returns network is ok. Hovever, WPA keeps on asking the wireless key

    Read the article

  • Rewriting a URL for tomcat through an ajp connection

    - by StudentKen
    I've tried several attempts to resolve this, but all have come up naught. Currently I have apache setup to forward all urls at and past the /portal/ tag to tomcat. Unfortunately, tomcat receives these requests through /portal/appName, a subdirectory in webapps rather than the webapps root directory where my wars are deployed. Is there a simple solution to this that I'm not seeing? I've been trying to use mod_rewrite to ^/portal/ $ / but that doesn't yield the expected results (perhaps I'm doing this wrong?).

    Read the article

  • How do I disable network connection at prelogin?

    - by ProGNOMmers
    --- This question is related to Ubuntu 12.10, since previous versions did not connect to network before login --- I had a bad boot today: the Ubuntu screen was blocked at startup time, after a green [OK] and a white blinking underscore. In recovery mode I figured out the problem: NetworkManager hung trying to connect to a wireless network that wasn't available anymore, and so I couldn't reach the prelogin level. Anyway: I really don't like that the pc connects to a network before the user logging in. How is it possible to disable it?

    Read the article

  • After installing ubuntu 12.04 my internet connection has completely disappeared

    - by Tony
    On my PC after installing Ubuntu 12.04 my networks are completely gone. Inside the terminal, after typing in nm-tool I get the following: The program nm-tool is currently not installed. You can install by typing: sudo apt-get install network-manager After I type that in then my password I get this: Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: network manager : Depends: iputils-arping but it is not going to be installed E: Unable to correct problems, you have held broken packages I'm a complete novice when it comes to computers so I have no clue.

    Read the article

  • Pro xy to Direct Connection

    - by Shivam Verma
    I use a Proxy Server with LDAP Authentication for accessing internet. So I need to manually add Server Address and Port in every application that has to connect to internet. Any methods by which I dont need to enter proxy address in my applications ? ( I have entered the authentication and proxy details at : apt.conf and changed the environment variables too. Firefox still asks for username pwd every time I connect)

    Read the article

  • My internet connection slows or dies unexpectedly

    - by genesis
    I installed Ubuntu 10.04 once again and I'm having some problems which I had before, but I have no idea how I solved them. On Windows, everything's working fine and I had no problems with this. My problem is that sometimes, when browsing through the internet, webpages just start to load really slow, sometimes it doesn't load anything at all (Error 118 (net::ERR_CONNECTION_TIMED_OUT): The operation timed out.) and it starts to work after few minutes. My IPv4 settings are automatic (DHCP), and IPv6 settings are Ignored/Disabled. I think my previous problems had something to do with IPv6, but I'm not sure. Is there a fix for this? iwconfig lo no wireless extensions. eth0 no wireless extensions. wlan0 IEEE 802.11bgn ESSID:"Fsite1" Mode:Managed Frequency:2.442 GHz Access Point: C8:3A:35:40:43:68 Bit Rate=0 kb/s Tx-Power=20 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:on Link Quality=43/70 Signal level=-67 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0

    Read the article

  • How to setup firewall to allow internet connection sharing via Wifi USB stick?

    - by hannanaha
    I have a Windows8 computer linked to the internet via an ethernet cable ("Ethernet" network connection). I have attached to it a DLink Wifi USB stick, and I'm trying to share the main PC's internet connection with my Android phone via a local wifi network. I am using the following batch file to set up this network: netsh wlan set hostednetwork mode=allow ssid=MyWifiName key=password keyUsage=persistent netsh wlan start hostednetwork After I run this script, I can see a new network connection appear in "Control Panel\Network and Internet\Network Connections" named "Local Area Connection *12", and I can see "MyWifiName" on the Android phone. The device name for this connection on the PC is "Microsoft Hosted Network Virtual Adapter". I also set up the "Ethernet" connection to share Internet with "Local Area Connection *12". However, the Android phone usually doesn't manage to obtain an IP from the wireless network, and when it does, there still seems to be no connectivity to the internet. When I turn off the Windows Firewall completely, or even just for "Local Area Connection *12", the Android connection is perfect. My questions are: How should I set up the Windows firewall to allow the phone to connect properly? Is there a specific rule I need to add to the Windows firewall advanced settings? [Note: the above method worked great in Windows 7, without any specific tinkering with the firewall]. Is it safe to turn off the firewall specifically for the "Local Area Connection *12" (the wifi connection) if the main Ethernet connection is still protected by the firewall? Thanks in advance.

    Read the article

  • 12.04 in Virtualbox is keep losing my wireless connection

    - by Derek
    I've Windows 7 as the Host OS, Ubuntu 12.04 as the guest and a Netgear WG111v2 as the USB Wireless device. Its connected to an open Wi-Fi network at work to bypass my works crazy strict filtering, When on the domain. I currently have network eth0 turned off in the virtualbox settings so the only network source would be through the USB device at wlan1. Its odd but the wireless seems extremely temperamental, I constantly have to ifconfig wlan down then ifconfig wlan1 up to get it back online. I know this might be super vague just curious if anyone has tried something like this or run into anything like it to point me in a direction I might not be seeing.

    Read the article

  • Building a Solaris 11 repository without network connection

    - by user12611852
    Solaris 11 has been released and is a fantastic new iteration of Oracle's rock solid, enterprise operating system.  One of the great new features is the repository based Image Packaging system.  IPS not only introduces new cloud based package installation services, it is also integrated with our zones, boot environment and ZFS file systems to provide a safe, easy and fast way to perform system updates. My customers typically don't have network access and, in fact, can't connect to any network until they have "Authority to connect."  It's useful, however, to build up a Solaris 11 system with additional software using the new Image Packaging System and locally stored repository. The Solaris 11 documentation describes how to create a locally stored repository with full explanations of what the commands do. I'm simply providing the quick and dirty steps.  The easiest way is to download the ISO image, burn to a DVD and insert into your DVD drive.  Then as root: pkg set-publisher -G '*' -g file:///cdrom/sol11repo_full/repo solaris Now you can to install software using the GUI package manager or the pkg commands.  If you would like something more permanent (or don't have a DVD drive), however, it takes a little more work. After installing Solaris 11, download (on another system perhaps) the two files that make up the Solaris 11 repository from our download site Sneaker-net the files to your Solaris 11 system Unzip and cat the two files together to create one large ISO image. The file is about 6.9 GB in size zfs create rpool/export/repoSolaris11 zfs set atime=off rpool/export/repoSolaris11 zfs set compression=on rpool/export/repoSolaris11 (save some space) lofiadm -a sol-11-1111-repo-full.iso /dev/lofi/1 mount -F hsfs /dev/lofi/1 /mnt You could stop here and set the publisher to point to the /mnt/repo location, however, this mount will not be persistent across reboots. Copy the repository from the mounted ISO image to a permanent, on disk location. rsync -aP /mnt/repo /export/repoSolaris11 pkgrepo -s /export/repoSolaris11 refresh pkg set-publisher -G '*' -g /export/repoSolaris11/repo solaris You now have a locally installed repository for adding additional software packages for Solaris 11.  The documentation also takes you through publishing your repository on the network so that others can access it.

    Read the article

< Previous Page | 41 42 43 44 45 46 47 48 49 50 51 52  | Next Page >