Search Results

Search found 26928 results on 1078 pages for 'disk image'.

Page 45/1078 | < Previous Page | 41 42 43 44 45 46 47 48 49 50 51 52  | Next Page >

• Moving Windows XP from ICH10R RAID 5 to single disk using Linux [migrated]

  - by tudor

  A friend's machine running Windows XP refused to boot recently which is running 3 SATA disks on RAID 5 (which was previously upgraded from RAID 1 not by me). I have determined there to be a disk failure. The disks have been replaced many times in the past few years. I wish to backup the RAID5 partition before I try anything to fix it. The RAID chipset used is ICH10R/DO. So, I plugged in an extra IDE drive and an Ubuntu USB key and looked at the RAID. The partitioning is a mess, but I did find at least one degraded but working RAID array with two partitions, one 79GB and the other 86GB. Then I: 1) Partitioned my IDE disk using fdisk to have a partition of 80GB and bootable, and marked as NTFS. 2) dd the contents of the array to the partition 3) disconnected everything else 4) inserted a Windows XP CD and ran fixboot, fixmbr, and bootcfg. They all run ok and claim that they worked. (e.g. bootcfg detects the Windows partition, fixboot returns saying that it was written correctly.) However, I'm still getting an error like "DISK FAILURE, BOOT DISK NOT FOUND". I have tried running the GRUB rescue disk, which also runs ok, but won't boot into Windows. It just stops with a flashing cursor after chainloader +1, boot. One clue may be that the partitions appear to be wack. One disk has a 79GB RAID partition on a 500GB drive with a offset, the second disk has a 320GB RAID partition across the whole drive. Additionally, the BIOS lists the RAID size as being 149GB. I don't see how this works. How are they even assembling the array when the partitions are so different? I have also tried running the Windows XP automated repair tool, but that didn't work either. I'm presuming this is something simple. Perhaps Windows is attempting to boot into RAID and, upon not finding it, simply crashing? Perhaps the 79GB partitions offset means that it's looking into the disk by that much? Please help!! To clarify: I want to make the single IDE disk bootable with a copy of the array so that I can prove/disprove that it's just that Windows has become corrupted, and use windows tools to correct it before attempting the same thing on the RAID array. That way I have a working backup and can show the process I used to fix it.

  Read the article

• Can't connect disk management to remote XP PC from local Win7/Server 2008

  - by Grez

  Scenario as follows: support technicians using Windows 7 PC's or Server 2008 terminal server are unable to connect Disk Management MMC snap in to a remote PC when the remote device is running Windows XP. "Disk management could not start Virtual Disk Service (VDS) on ". This can happen if the remote computer does not support VDS, or if a connection cannot be established because it was blocked by Windows Firewall." Connecting from another XP machine or 2003 server to the same XP machines works fine. Even connecting from XP/2003 to the Win7 or 2008 server works fine. Windows firewall disabled on all devices. I'm guessing this is something to do with the fact that XP uses logical disk manager service whereas Win7/2008 use Virtual disk manager service. But there doesn't seem to be any way to use logical disk manager service from 7/2008 to connect to XP...

  Read the article

• Text recognition from low resolution images

  - by iceman

  I have a bunch of word-tags as low resolution png images. Is there any OCR software which can dump the text from the images into a text file?

  Read the article

• Formatted USB flash drive with Disk Utility on Mac and now it is not recognized on any Mac or Windows machine

  - by Željko Filipin

  I have formatted Canyon CN-MP4A USB flash drive with Disk Utility on Mac and now it is not recognized on any Mac or Windows machine. I have formatted with Disk Utility > drive > Erease > Format > MS-DOS (FAT). Now when I plug it in any Mac or Windows machine, nothing happens. Like nothing is plugged in. It has a screen, and I was able to format it directly from the device before, but now when I turn it on, welcome screen appears, but nothing else. I can not get to the menu. Is there a way I can format it? I am looking for the answer on the internet, but no luck so far.

  Read the article

• Is it reasonable that a random disk seek & read costs ~16ms?

  - by fzhang

  I am frustrated about the latency of random reading from a non-ssd disk. Based on results from following test program, it speeds ~16 ms for a random read of just 512 bytes without help of os cache. I tried changing 512 to larger values, such as 25k, and the latency did not increase as much. I guess it is because the disk seek dominates the time. I understand that random reading is inherently slow, but just want to be sure that ~16ms is reasonable, even for non-ssd disk. #include <sys/stat.h> #include <sys/time.h> #include <sys/types.h> #include <sys/unistd.h> #include <fcntl.h> #include <limits.h> #include <stdio.h> #include <string.h> int main(int argc, char** argv) { int fd = open(argv[1], O_RDONLY); if (fd < 0) { fprintf(stderr, "Failed open %s\n", argv[1]); return -1; } const size_t count = 512; const off_t offset = 25990611 / 2; char buffer[count] = { '\0' }; struct timeval start_time; gettimeofday(&start_time, NULL); off_t ret = lseek(fd, offset, SEEK_SET); if (ret != offset) { perror("lseek error"); close(fd); return -1; } ret = read(fd, buffer, count); if (ret != count) { fprintf(stderr, "Failed reading all: %ld\n", ret); close(fd); return -1; } struct timeval end_time; gettimeofday(&end_time, NULL); printf("tv_sec: %ld, tv_usec: %ld\n", end_time.tv_sec - start_time.tv_sec, end_time.tv_usec - start_time.tv_usec); close(fd); return 0; }

  Read the article

• How to convert a raw disk image to a copy-on-write image based on another image for use with kvm and

  - by Jean-Paul Calderone

  I have a virtual Windows machine running on kvm. Presently it has a 90GB raw disk image. I would like to clone this VM without having to keep two copies of the 90GB raw disk image around. It seems like a good approach for doing this is to make two new qcow or qcow2 images based on the original. First I converted the raw image to a qcow2 image: qemu-img convert -O qcow2 basewindowsxp.img basewindowsxp.qcow2 Then I tried creating a new image backed by this: qemu-img create -F qcow2 -f qcow2 -b `pwd`/basewindowsxp.qcow2 windowsxp-1.qcow2 Then I used virt-manager to point the original VM at windowsxp-1.qcow2. However, when I try to start up the VM in this new configuration, virt-manager reports an error: Traceback (most recent call last): File "/usr/share/virt-manager/virtManager/engine.py", line 588, in run_domain vm.startup() File "/usr/share/virt-manager/virtManager/domain.py", line 150, in startup self._backend.create() File "/usr/lib/python2.6/dist-packages/libvirt.py", line 300, in create if ret == -1: raise libvirtError ('virDomainCreate() failed', dom=self) libvirtError: internal error unable to start guest: qemu: could not open disk image /var/lib/libvirt/images/windowsxp-1.qcow2 The error suggests that the filename was misspecified or that the filesystem permissions are too restrictive, but neither of these is the case: $ ls -l /var/lib/libvirt/images/windowsxp-1.qcow2 -rwxrwxrwx 1 root root 262144 2010-05-27 08:32 /var/lib/libvirt/images/windowsxp-1.qcow2 Why won't virt-manager start this vm?

  Read the article

• IOMEGA 500GB hard disk data reccovery

  - by Vineeth

  Last year by November I bought an IOMEGA 500GB Prestige hard disk. Yesterday, unfortunately the hard disk fell down from my table. After that incident, when I connect my disk, Windows asks me to format the disk to use, but I didn't format it yet. Actually, on that hard disk I have about 320GB of data. I tried all my possible ways to access my disk. I tried using DOS. It shows "data error (Cyclic redundancy check)". I have a 3 year warranty. Will I be covered under warranty if I report this issue to IOMEGA? Can I get my data back?

  Read the article

• Solaris disk I/O spike... which monitoring tools do I need?

  - by bonez05

  Hi all, My Solaris 10 websever / database server disk io keeps spiking at intermittent times. Using iostat -xtc 5 the reads / sec will jump from 3.0 to 1450.0 and %busy will jump to 98% The apache access log doesn't indicate anything out of the ordinary. In other words, requests aren't any higher than usual. top doesn't generate anything useful. The cpu usage is fine with mysql using about 20% and nothing else to speak of really. What monitoring tool should I be using to see what process is using excessive disk I/O? or if there are any other suggestions I'm all ears. Thanks

  Read the article

• Volume size doesn't match Disk size after gparted expansion

  - by Cybersylum

  I just expanded a basic disk on a Windows XP VM from 15gb to 40 gb using GPARTED LiveCD (0.5.2-11). I didn't notice anything unusual during the expansion; but after I rebooted back into Windows, the disk capacity doesn't match the disk size as it should (only 1 volume on the disk). The disk shows as 40gb; but the C: volume still shows the original size. I've tried expanding the disk again with GPARTED (no change), and using VMware converter and have it adjust the size of the volume during the process (complains about a lack of space of snapshot error inside the os). The volume has 27% free space so I don't think it is a space issue. Chkdsk doesn't seem to find anything wrong either. The OS seems to run just fine, it doesn't see the additional space however. Any ideas?

  Read the article

• Dell 2950 Perc 6/i "physical disk" and "Enclosure(Backplane)" under Connector 1 in OMSA tree- Troubleshoot help

  - by user66357

  Just looking for someone who might know why this could occur... In OMSA, on my Dell 2950, there usually is only one "Physical Disks" child under "Enclosure (Backplane)" in the tree view. Currently, the tree looks like this: Dell PERC 6/i Integrated Connector 1 (RAID) Enclosure (Backplane) Physical Disks (1:04 good, 1:05 removed) Physical Disks (1:33 Ready but unused) Normally it's like this: Connector 1 (RAID) Enclosure (Backplane) Physical Disks (1:04 good, 1:05 good) From the front, 6 of 6 3.5" SAS drives are connected. The server is showing Slot 5 as bad and the disk as removed. It seems that the drive in Slot 5 is being sensed as external to the Enclosure. Any ideas why this would happen? Think I can get away with rebuilding the virtual disk by replacing 1:05 with 1:33? Thanks.

  Read the article

• Can I "branch" VirtualBox snapshots (base multiple VM on the same disk image + separate diffs)?

  - by Thilo

  I keep multiple VirtualBoxes for different projects. They are all running the same Debian base system. Keeping complete copies of all the disk images is getting expensive. Is there a way that I can base multiple VM on the same (read-only) disk image, with (hopefully small) diffs layered on top? This is just like snapshots work, except that there is no concept of "current" and "previous", they are more like branches. Or can I just use snapshots (of the "same" VM) for this? I would be wanting to run more than one of those snapshots concurrently.

  Read the article

• Can not boot windows XP from cloned hard disk - what can I do?

  - by Martin

  My configuration: a PC (some years old) with MSI K8N-Neo-4F Motherboard, 1 GB RAM. Disk 1 (Maxtor, SATA II, 250 GB): 2 Partitions, on Partition 1 (48 GB): Windows XP Professional (NTFS) on Partition 2 (190 GB): data (NTFS) I wanted to have a larger and faster disk (the PC is incredibly slow and permanently the disk is rattling when I try to open an application or during Windows startup), so I took Disk 2 (Seagate, Sata II, 500 GB), installed in the PC, created at first a 400 GB-partition at the end of the disk and cloned the data to it, which worked well Installed a swap partition and a partition for Ubuntu Linux 12.10 on the first "part" of the disk so I was able to boot Linux and the old Windows XP with the Linux "System selection" at startup. Now I wanted to move Windows XP to the new disk, deleted the Linux partitions cloned Windows XP to the new disk (with free tools - EASESUS), left both disks in the PC and tried to select the new hard drive during boot as boot partition. This did not work, the PC refused to boot from this second disk. I tried many things like making the boot partition on the 2nd drive "active" in the Windows System Preferences modifying the boot.ini file to boot from the second disk - tried to boot from it, but ended with an error message stating that it was not possible to boot from this disk because of a hardware failure or something else or so removing the original disk and plugging the new one on the same SATA port as the original one - also booting failed with an error message repairing the MBR by booting into recovery mode from the Windows XP Installation CD-ROM, selecting the second disk and doing "FIXMBR" which said that everything was fine with the MBR. after that at least the PC tried to boot from the newer disk and then startup was hanging during the blue screen with the Windows Logo.... no luck. ... deleting the cloned partition and cloning again - this time with Macrium Reflect Free version... - no success during booting. I tried a lot of things with no success, so I wonder what I am doing wrong?! What could I do to successfully clone my Win XP partition to replace the original disk by a larger one which is bootable.

  Read the article

• grub2 error: out of disk

  - by Carl Smotricz

  I'm trying to make a 250G USB hard disk Ubuntu-bootable on a Compaq nc6220 laptop. I've removed all other disks, so /dev/sda (the USB disk) is the only disk other than CDROM. I installed Ubuntu 9.10 to this disk from the live CD, putting the bootloader on /dev/sda . The default system couldn't be booted, and nothing I did in the Grub menu/cmdline helped. So I chrooted onto the disk and did grub-install /dev/sda. That seemed to work fine, but Grub (1.97 beta 4) keeps coming up with error: out of disk Even when I drop to the command line to do something simple like ls or help, it's always the same error message. Any hints for resolving this, please?

  Read the article

• Windows server detected error with hard disk

  - by user53864

  We have hosting Windows server 2008 R2 and I am working as admin in small company. The server is hanging and restarting as the hard disk seems to be damaged due to power fluctutaion(though having inverter) as it's showing the below error message on server reboot: Problem detected with the hard disk Press any key to continue It's Seagate 1TB SATA hard disk and it's booting after pressing enter. So it's clear that the hard disk is dying. Yes, it's in warranty but it's fact that warranty won't recover the lincesed windows server 2008 and it's data. As it's booting now, I backed up required things and I am thinking to clone the entire hard disk. The first thing it striked me is checking on the Seagate site if any tool available for cloning and I found Seagate DiskWizard but not specified it for windows server 2008. Please anybody could help me giving your best ideas for the below: Urgently, What's the best way(free of cost) for me to clone in my case with the new same sized hard disk? It's a one time lincenced and I cannot use the same key again if I reinstall the server. Will the lincense be carried with new disk if cloned? else there is a way to contact Microsoft explaining the problem occurred, to obtain new key for no charge?. I want to take measure for future. How do I keep two disks in continuous sync? mirrored & raid are the only options converting the disks to dynamic? or is there a best way I could do with no additional charge?. Any help is greatly appreciated. Thank you! EDIT:1 I started cloning the disk with CloneZilla and it was going proper showing in GUI. But after some time there is no GUI but a black screen with some codes(looks like disk location numbers) going page by page(I have attached the screenshots below captured from my phone). Do you people think it's actually cloning?. I started in the morning and it's evening now. I left the office now to let it finish what it's trying to do and I'll go & check it tomorrow. Slowly lost hope, don't know what face it's going to show tomorrow. Any ideas?

  Read the article

• Does installing windows format the hard disk?

  - by Jason

  My Google search for ""does installing windows format the hard disk" returns: No results found for "does installing windows format the hard disk". I was quite surprised. I'm hoping to get a quick answer here. Does an install format the hard disk, and destroy all data, including non-os/s data? -Or do you specifically have to say "format" at some point so you know you are losing everything? [I tried to go to SP3, but it doesn't work on my computer. My SP2 disk is fired. I only have a SP1 disk, with a seperate SP2 package. I can't get to Safe Mode to uninstall SP3 ("Windows XP Setup cann run under Safemode. Setup will restart now.). I don't want running the SP1 disk to destroy any non-o/s data.] Thanks.

  Read the article

• Unable to format/add a partition to Windows XP

  - by sma

  I recently add a 1T disk to an XP machine. I found the disk in the "disk management", I click "initialize" to init it, then creates a primary partition with size 950G, then select quick format to format the disk, the "disk management" will then complains: The disk configuration operation did not complete. Check the system event log for more information on the error. Verify the status of your storage devices before retrying. If that does not solve the problem, close the disk management console, then restart disk management or restart the computer. What could be the reason?

  Read the article

• Linux RHEL : Making disk image efficiently

  - by TheProfoundGeek

  I have a linux box having RHEL. Its disk (hda1) is having free space of about 25GB. I have an another disk (hda2) which is of 250GB having another RHEL instance, it's partitioned for 200GB. Data on the disk occupies about 21GB of data. The image of hda2 needs to be taken and restored on other disk of same specs. What is the best way to make image file of the hda2? Ideally the images size should be around 25GBs as the actual data on the disk is just 21GB. I am aware about the following two methods. Method 1 : Raw Image dd if=/dev/hda2 of=/path/to/image dd if=/path/to/image of=/dev/hda3 Question 1 : Will the above method make a gigantic image of 250GBs? Is it efficient? Method 2 : Compressed Image. dd if=/dev/hda2 | gzip > /path/to/image.gz gzip -dc /path/to/image.gz | dd of=/dev/hda2 Question 2 : I tried the method 2, its taking too long. What are the pit falls of this methods? Which of the above method id efficient and why? Is there any other Linux utility which can do the job? Third party tools are no no.

  Read the article

• How to read a barcode from an image

  - by tardate

  I'm seeking a library, technique or advice on how to read an EAN-13 barcode from an image (including ISBN,and ISSN encodings). The image would come from a mobile phone or webcam, so resolution may be quite poor and not well aligned. I'm specifically interested in something that could be used from ruby on rails, but answers for other languages are welcome. Open Source solutions preferred. Leading solutions so far: ZBar (previously known as Zebra - h/t @bgbg, @Natim) and ZXing (h/t @codr)

  Read the article

• Finding edge and corner values of an image in matlab

  - by James

  Hi, this problem links to two other questions i've asked on here. I am tracing the outline of an image and plotting this to a dxf file. I would like to use the bwboundaries function to find the coordinates of the edges of the image, find the corner coordinates using the cornermetric function and then remove any edge coordinates that are not a corner. The important thing I need to be able to do is keep the order of the corner elements obtained from bwboundaries, so that the section traces properly. The dxf function I have that draws from the coordinates draws lines between coordinates that are next to each other, so the line has to be drawn "around" the section rather than straight between the corner points. The reason I am doing this is because there are less coordinates obtained this way, so it is easier to amend the dxf file (as there are less points to manipulate). The code I have so far is: %# Shape to be traced bw = zeros(200); bw(20:40,20:180) = 1; bw(20:180,90:110) = 1; bw(140:180,20:185) = 1; %# Boundary Finding Section [Boundary] = bwboundaries(bw); %Traces the boundary of each section figure, imshow(bw); hold on; colors=['b' 'g' 'r' 'c' 'm' 'y']; for k=1:length(Boundary) perim = Boundary{k}; %Obtains perimeter coordinates (as a 2D matrix) from the cell array cidx = mod(k,length(colors))+1;% Obtains colours for the plot plot(perim(:,2), perim(:,1),... colors(cidx),'LineWidth',2); end Coordmat = cell2mat(Boundary) %Converts the traced regions to a matrix X = Coordmat(:,1) Y = Coordmat(:,2) % This gives the edge coordinates in matrix form %% Corner Finding Section (from Jonas' answer to a previous question %# get corners cornerProbability = cornermetric(bw); cornerIdx = find(cornerProbability==max(cornerProbability(:))); %# Label the image. bwlabel puts 1 for the first feature, 2 for the second, etc. %# Since concave corners are placed just outside the feature, grow the features %# a little before labeling bw2 = imdilate(bw,ones(3)); labeledImage = bwlabel(bw2); %# read the feature number associated with the corner cornerLabels = labeledImage(cornerIdx); %# find all corners that are associated with feature 1 corners_1 = cornerIdx(cornerLabels==1) [Xcorners, Ycorners] = ind2sub(200,corners_1) % Convert subscripts The code I have is, to give a matrix Xfin for the final x coordinates (which are on the edge AND at a corner. Xfin = zeros(length(X),1) for i = Xcorners XFin(i) = Xcorners if i~= Xcorners XFin(i) = [] end end However, this does not work correctly, because the values in the solution are sorted into order, and only one of each value remains. As I said, I would like the corner elements to be in the same order as obtained from bwboundaries, to allow the image to trace properly. Thanks

  Read the article

• How to create an image from a UIView / UIScrollView

  - by Andre

  Hi, I have an image in an UIScrollView, that can be scrolled and zoomed. When the user presses a button, I want the code to create an image from whatever part of the UIScrollView is inside an area I specify with a CGRect. I've seen code to crop UIImages, but I can't adapt it to do the same for a view, because it uses CGContextDrawImage. Any thoughts? Cheers, Andre

  Read the article

• Crop the image using Jquery in C# and ASP.Net

  - by Vara Prasad.M

  I am having a image in one page and i have to crop the image to the predefined borders to crop this should happen using jquery and it has to be done in C# and ASP.Net and this is done by using Client side not the server side. but the X and Y coordinate values must be saved in hidden fields and used for backend plz reply me ASAP it is very urgent ThanQ, Vara Prasad.M

  Read the article

• Image upload and jCrop and codeigniter

  - by sea_1987

  Hi There, I am trying to build a system that allows a user to select an image from their own computer, and crop it using the jCrop tool from jQuery. My question is can I show the image the user has selected from their system without uploading it to a system, I dont really want to do two uploads, unless I can do the first upload silently? Any help would be great. Thank you.

  Read the article

• very large image manipulation and tiling

  - by Mohammad

  I need to a software , Program(Java),or a method for tiling very larg images (more than 140MB). I have used imagemagic and convert tools photoshop and corel draw and matlab (in win os) but I have problem with memory amount.and memory is not enough.imagemagic is very slow and result is not desirable. I dont know how can i only load a small part of image on hard disk to RAM .(with out load whole image from hard)

  Read the article

• how to crop an image using rectangale overlay and touch on iphone

  - by Amir

  Hey Everyone, I am looking for a good tutorial or sample code, that would show how to crop an image taking from iphone camera something in lines of http://www.defusion.org.uk/code/javascript-image-cropper-ui-using-prototype-scriptaculous/ but you would control the corners with your fingers any tip would be greatly appericated, as i am new to iphone dev. Thanks, Amir

  Read the article

• How to make android app's background image repeat.

  - by virsir

  I have set a background image in my app, but the background image is small and I want it to be repeated and filled in the whole screen. What should I do <LinearLayout xmlns:android="http://schemas.android.com/apk/res/android" android:orientation="vertical" android:layout_width="fill_parent" android:layout_height="fill_parent" android:background="@drawable/bg" android:tileMode="repeat">

  Read the article

< Previous Page | 41 42 43 44 45 46 47 48 49 50 51 52  | Next Page >