Search Results

Search found 11107 results on 445 pages for 'drive bay'.

Page 45/445 | < Previous Page | 41 42 43 44 45 46 47 48 49 50 51 52  | Next Page >

• How do I restore GRUB 2?

  - by uahug

  I upgraded my laptop with an SSD, moving my old HDD to where the DVD-drive was, so that I could have speed and storage. Now, I have reinstalled Ubuntu on the SSD, deleting all the partitions on the old HDD to make space for a data partition. But now the laptop doesn't even get to GRUB 2 if the HDD is plugged in! If I take it out, everything works, but as soon as I plug it in and retry to boot, I won't find GRUB. At first, I thought it was because of the boot order, but the order was OK: first the notebook hard drive (SSD) and then the CD/DVD drive (which in reality is the HDD). How can I fix it? Doing a simple grub-install /dev/sda doesn't work.. The SSD is sda, and the HDD is sdb.

  Read the article

• Fixing Windows install by connecting it's hard drive via USB to a different laptop

  - by Jason

  I tried to upgrade a laptop to SP3, which broke it. I later found out SP3 doesn't work on that 2002 laptop. I can't uninstall SP3, or fix SP2, because the hard drive is now not detected during setup (I've read that's the problem you get). I put the hard drive in a USB drive case and plugged it into my other laptop, and I can read (& write to) the disk okay. (The hard drive won't fit in my other laptop, so I'm using USB.) I need to get that disk back to SP2, or fix whatever files got screwed up causing the disk to not be recognized. I don't want to do a re-install as there are 80GB of files on it I need, and they won't fit on the HD of my other laptop, and also because I no longer have some of the install CDs for software on it. What do I need to do to fix that drive from my other laptop? (I don't want my working laptop (XP SP3) to get screwed with by putting an SP2 disk in the CD drive, or the non-o/s data on the other hard drive screwed with.)

  Read the article

• Fixing Windows install by connecting its hard drive via USB to a different laptop

  - by Jason

  I tried to upgrade a laptop to SP3, which broke it. I later found out SP3 doesn't work on that 2002 laptop. I can't uninstall SP3, or fix SP2, because the hard drive is now not detected during setup (I've read that's the problem you get). I put the hard drive in a USB drive case and plugged it into my other laptop, and I can read (& write to) the disk okay. (The hard drive won't fit in my other laptop, so I'm using USB.) I need to get that disk back to SP2, or fix whatever files got screwed up causing the disk to not be recognized. I don't want to do a re-install as there are 80GB of files on it I need, and they won't fit on the HD of my other laptop, and also because I no longer have some of the install CDs for software on it. What do I need to do to fix that drive from my other laptop? (I don't want my working laptop (XP SP3) to get screwed with by putting an SP2 disk in the CD drive, or the non-o/s data on the other hard drive screwed with.)

  Read the article

• Why doesn't the Ubuntu Installer see all of my hard drives

  - by atodd

  I'm trying to setup a dual boot system with Windows Vista 64 (already installed) and Ubuntu 10.10. I added a new drive which is identical to the one Vista is installed on. When I boot into the LiveCD I can see and mount the second drive and edit it in Gparted. However, when I use the installer it will only bring up the drive that already has Vista installed. I've tried everything I know. I'm not sure if its a BIOS setting or something else I've missed. I've also tried both the desktop and alternate amd64 installs with the same result.

  Read the article

• How can one implement RAID1 with a Dell Latitude laptop containing one normal hard drive, and one hard drive in an external bay?

  - by user12583188

  OS: Win7 professional Laptop: latitude e6420 The answer to this question should address how to deploy RAID1 software wise on a dell latitude e6420. I have two Hitachi Z5K500 320GB drives (new). There is one hard drive (320GB capacity) in the system now, which contains the current installation that I would prefer to keep. The drive currently inside the laptop will be replaced with one of the Hitachi drives, and the other Hitachi drive will be fitted into the laptop by way of a Dell hard drive "caddy" enclosure, which inserts into the media bay of the laptop (you remove the cd-rom bay, insert hd-bay).

  Read the article

• Is there a performance difference between Windows 7 on SSD installed from scratch versus it using a recent ghost/clone drive image from a harddisk?

  - by therobyouknow

  I'm planning to upgrade a notebook PC to a Solid-State Flash Drive (SSD) soon. I want to use the notebook before that and am considering installing Windows 7 on the hard disk (spinning variety, 5400rpm) before I get the SSD. To save time I am wondering if I can ghost/clone the installation of Windows 7 from the hard drive and put on the SSD. Would the performance of this clone from the harddisk onto the SSD be different from starting again and reinstalling Windows 7 from scratch on the SSD? (Windows 7 32bit professional)

  Read the article

• What are "Excess Fragments" in defragmenting a hard drive?

  - by Andrew Swift

  I'm defragmenting my hard drive (XP SP3) with PerfectDisk 7.0, and it finds 816,659 excess fragments when I ask for an analysis. [update] Specifically, it shows that the 1TB disk is 14% fragmented with 19693 fragments and 816,659 excess fragments. About 20% of the disk is still free space. What does excess fragments refer to? What is the difference between fragments and excess fragments? I have had problems in the past where I defragmented a fragmented disk and many files were corrupted. It seemed as though "excess fragments" referred to orphan pieces, where the program couldn't find out where to put them. If that was true, then defragmenting a disk resulted in many incomplete files, and in fact I defragmented a disk full of MP3's and got a lot of corrupted files as a result. Instead, I started to simply format a separate disk and copy everything from one to the other. That way there were no orphan bits, and no file corruption. Does anybody know what "excess fragments" really are?

  Read the article

• If I partition a drive connected via eSata will it show different partitions when connected via USB?

  - by jeffreypriebe

  I have an odd problem with an external drive. I'm formatting it connected to my laptop prior to connecting it to my router. The HDD enclosure has both an eSata and USB connections. Generally, I connect it via eSata to my laptop. I created my partitions and connected it to the router, but I see partition information that is different than what I created. After chasing leads concerning large HDD size, I mindlessly connected the HDD to my laptop with USB. Lo! I see the same partitions as the router. Attached are screenshots using the same program and the HDD in question. The only difference is the connection. For the first, I connected via eSata and hit "refresh" on the partition program. Then, turned off the HDD, disconnected the eSata cable, and connected via USB. Power and refresh. eSata: reports a total HDD size of 2328 GB, with four partitions (the third being 1.96TB) USB: reports a total HDD size of 280 GB, with three partitions (the third being 279 GB) Any idea why this is happening? It looks like it clearly is an issue of the 4K sector size and not playing nice with the USB enclosure. I tried it eSata and USB in Windows and Linux and it appears consistently that eSata is reporting correctly, USB incorrectly.

  Read the article

• Are there any disadvantages of having a "free fall sensor" on a hard disk drive?

  - by therobyouknow

  This is a general question that came out of a specific comparison between the Western Digital Scorpio WD3200BEKT and Western Digital Scorpio WD3200BJKT (which is the same as the former but with a free fall sensor.) Note: I'm not asking for a review or appraisal of these specific drives, as the general question does apply on other brands as well. Though your input would help my decision. To break down the general question in order to answer it, I would be looking for comments on things like: if it's necessary to have differing physical dimensions between free fall sensor drives and those without, e.g. does it make it any thicker, and therefore reduce the systems where it can be installed - particularly smaller laptops? does it actually make the system less reliable - because of false alarms whereby the drive thought the laptop was falling but it wasn't? I suppose that the fact that a manufacturer produces both drives with and without free fall sensors says something about possible disadvantages. Or it could be standard marketing techniques where by making drives with and without results in larger sales volume than just those with the feature alone.

  Read the article

• CD/DVD Drive not detecting locally burned CD/DVDs, but works fine with Genuine discs.

  - by Rahul

  I'm using Dell Inspiron 1420 - 32 Bit - Windows Vista, since 2.5 years. I'm facing a strange problem with my CD/DVD-drive. I cannot run/play a CD/DVD which I get burned from my friends. But when I insert Genuine CD, I'm able to play/run it. And when I try to install my Vista package which I got with my notebook, the CD/DVD gets loaded. If I insert a CD/DVD which I get from my friend, CD doesn't get loaded and the system gets hanged. But all these CDs/DVDs work on other systems. I've tested it on many of my friends PCs. So, now I'm able to run only genuine CDs & a few genuine DVDs. My Experience/Experiments: I tried to install Windows Vista using Genuine DVD - It worked I tried to install Ubuntu which I got from shipped from Canonical Ltd. - It worked I tried to install OpenSUSE .iso file burned to a DVD in my friend's PC - It didn't work for me (But working perfectly fine in my friends PCs(Tested in 4 other PCs) Tried to play a DVD containing movies, burned in my friend's PC - It didn't work for me (But working perfectly fine in my friends PCs Any help/suggestions would be appreciated. Thanks.

  Read the article

• Can I clone my hard drive to an external and boot from the clone?

  - by willbuntu

  First thing: I am not asking what software I'm supposed to use. I already know the answer: Ghost (proprietary), Clonezilla, and dd (if I'm careful). What I really want to know is if it is possible to (essentially) bit-for-bit clone my entire installation (OS, installed software, activation(s), etc.) to an external USB hard-drive, and then boot off of that (if I need to, I know how to edit BIOS settings and use Plop boot manager), and work with it day-to-day as if there was virtually no difference from using my internal HDD now. Again, I'm not asking how to install Windows to an external (because I know I'd need to do some special workaround), I'm asking if I can clone everything and boot off of it. In case you're wondering why I'm going to this trouble: I'm using a Lenovo Essentials laptop that has an unmodifiable partition table (due to recovery crap), and has all 4 of its partitions spoken for (3 primary, one extended, cannot change the extended). Anyway, my thought is that if I can clone everything and boot off of it when I need to, and just have a Linux distro on the internal HDD, then that could work.

  Read the article

• How to mount a drive in Ubuntu from terminal

  - by Mirage

  hi, I want to mount a drive from terminal at start up. At start if i use ls /media then its empty but if i go to computer and then click VM drive there and after that i use ls /media then it shows VM drive . How can i mount that drive at from terminal something like mount VM or how can find the path of VM like /dev/sda or something

  Read the article

• Why suddenly DOS-type hexadecimal file names?

  - by Marvin Nicholson

  One of the fairly recent folders on my XP SATA data drive suddenly shows DOS-type hexadecimal file names (i.e., eight characters with three-character extensions) I deleted them and now my Recycle bin shows them with a tilde (i.e., 194ABE~1.JPG). The images are all valid but the file names I assigned are gone. (The 2-terabyte SATA data drive has no OS, if that matters.) The last time this happened on an IDE drive, I was able to back up all the remaining files just before the drive died. Am I facing the same scenario now with my 2-terabyte SATA data drive? It is only a couple of years old. Should I quickly buy another one and back up 20 years of files to it before my current drive dies?

  Read the article

• Strange behaviour of Apache with network drive

  - by AMIT

  Hii all, Am runnnig Apache web server in front of mongrel server and mapped a network drive on my system.In my application miongrel is doing file upload to network drive and apche is serving file from network . But i disconnected the network drive and what strange behaviour am getting still am able to uplaod as well as download files to and from network drive .could anyone tell me why is it so. Am on windows NT machine

  Read the article

• SMPS stops when I plug in a SATA drive?

  - by claws

  Hello, Part 1: my first question is all the 4 wire power connectors (intended for hardisks/dvd drives not mother board) are same. Right? I've been using all of them same and I had no problem for years. Yesterday I borrowed a SATA disk from my friend and connected it my computer using Sata Power adaptor (4 wire) and when I switched on the computer. There were fumes coming out of the connector. I immediately turned it off (in just one second). I tested the voltages in the 4 wire power connector of my SMPS: They were 5.3v & 12.2V. I couldn't measure the current. But my SMPTS label reads: DC Output: 3.3v (25A) +5v (32A) -5v (0.3A) +12V (17A) -12V (0.8A) And the SATA hardisk label reads Input: +5v (0.72A) +12V (0.52A) I'm shocked! I never noticed this. Does the "sata power adaptor" scale down the current to required? If it doesn't, I've been connecting same way for years. I never had any problem. This is the first time I'm encountering it. Part 2: I wanted to return the drive to my friend. He has two hard disks, SATA & PATA. Its the SATA that I borrowed. When he usually switches on. The CPU fan starts & then stops for a sec and starts again and continues working. That was the earlier situation. I don't know why it stops & starts? Well, Now when I connect this SATA disk and switch ON the computer. CPU fan starts (just for an instant, not even a 0.5 sec) and stops. It doesn't start again, I mean the power from SMPS has stopped. But if I disconnect this SATA disk. It works fine. What seems to be the problem? I've no idea about why there were fumes or why his SMPS starts & stops giving power? What is its relation with the SATA disk connection?

  Read the article

• Win7 - DVD drive spins up but fails to read, fails write

  - by MA

  Running Windows 7 x64. DVD drive is a BenQ DC DQ60 ATA dvd-dl rw. Everything functions correctly in linux, and I can boot to cd/dvds, so the drive itself does work. Symptom: when I insert any CD or DVD (burned or retail), the drive spins up the disk, and (usually) displays the disk title in My Computer, but just continues to spin indefinitely. I cannot browse the disk in the drive, install from it, or read anything.

  Read the article

• Slow solid state drive on laptop running Linux

  - by wcyang

  I installed a solid state drive on my laptop, but I don't get the blazing speeds which people write about. My system: Laptop: Acer Aspire 7552G-6061 Solid state drive: Crucial 256GB M4 CT256M4SSD2 Operating system: Linux (Trisquel 5.5, a derivative of Ubuntu) I am using AHCI. I installed the operating system onto the solid state drive (as opposed to copying it). How can I make the solid state drive faster? Could the problem be with the block or sector alignment?

  Read the article

• Powershell mapped network drive doesn't persist

  - by Davidw

  I'm trying to create a script that maps a network drive whenever I connect to a VPN, then disconnects the drive when I disconnect from the VPN, using Task Scheduler to launch the script when the event is created. It launches the script, which creates the drive, but when Powershell closes, it disconnects the drive, so it only stays open for a few seconds, then closes it again. I have the persist parameter specified, but it doesn't persist. New-PSDrive -Name "N" -PSProvider FileSystem -Root \(Serverpath)\ndrive -Persist

  Read the article

• Why do msi installations use slower drives over faster ones in windows 7?

  - by Joshua C

  I have noticed that the slowest drive in my system is used most during an msi installation. I mainly notice this when running windows updates but it seems to be msi installs in general. The setup I last saw this occur on was running Windows 7 with the following drives: Sata: 240GB SSD NTFS ~515MB/s Operating system drive 1TB NTFS ~110MB/s Firewire: 4TB ExFAT ~80MB/s I would think that windows would choose the fastest drive with available space for temporary files. But it will instead choose the external drive with the slowest transfer speed. I could also understand choosing the 1TB for not being an ssd in an attempt to preserve the longevity of the ssd write capacity. Why does this happen? Is there a way to force these installations to use the OS drive or a specific drive?

  Read the article

• Win7 x64 unresponsive for a minute or so. HD failing?

  - by Gaia

  On a fully updated Win7 x64, every so often the system stalls for a minute or so. This has been going on for a couple months now. By stalling I mean the mouse responds and I can move windows around, but any window, any program, that is open becomes whiteish when I select it AND any new programs will not open. It doesn't matter what kind of program it is. When the stall stops all clicks I made (open new programs for example) take effect. Nothing shows up consistently (as in every time this happens) in the event log. Today though I was able to find something, but it doesn't reveal much other than the "system was unresponsive". It's a 7009 for "A timeout was reached (30000 milliseconds) while waiting for the Windows Error Reporting Service service to connect." It doesn't matter if I have any USB devices plug-in or not. I've ran Microsoft Security Essentials and Malwarebytes. While the machine is unresponsive, I've noticed that Drive D (the other partition on the single internal HD in this laptop) is displayed like this in explorer. This never occurs with Drive C or any other drive on the machine. . SMART report for the physical drive: Read benchmark by HD Tune 5 Pro, probably the most telling piece of the puzzle. Isn't this alone enough to see there is a problem with the drive, regardless of whether the unresponsiveness is caused by such purported problem? Here is a short hardware report: Computer: LENOVO ThinkPad T520 CPU: Intel Core i5-2520M (Sandy Bridge-MB SV, J1) 2500 MHz (25.00x100.0) @ 797 MHz (8.00x99.7) Motherboard: LENOVO 423946U Chipset: Intel QM67 (Cougar Point) [B3] Memory: 8192 MBytes @ 664 MHz, 9.0-9-9-24 - 4096 MB PC10600 DDR3 SDRAM - Samsung M471B5273CH0-CH9 - 4096 MB PC10600 DDR3 SDRAM - Patriot Memory (PDP Systems) PSD34G13332S Graphics: Intel Sandy Bridge-MB GT2+ - Integrated Graphics Controller [D2/J1/Q0] [Lenovo] Intel HD Graphics 3000 (Sandy Bridge GT2+), 3937912 KB Drive: ST320LT007, 312.6 GB, Serial ATA 3Gb/s Sound: Intel Cougar Point PCH - High Definition Audio Controller [B2] Network: Intel 82579LM (Lewisville) Gigabit Ethernet Controller Network: Intel Centrino Advanced-N 6205 AGN 2x2 HMC OS: Microsoft Windows 7 Professional (x64) Build 7601 The drive less than 1 year old. Do I have a defective drive? Seagate Tools diag says there is nothing wrong with the drive... UPDATE: I noticed that the windows error reporting service entered the running state then the stopped state and the space between the two events was exactly 2 minutes. Which error it was trying to report I don't know. I check the "Reliability Monitor" and it shows no errors to be reported. I've disabled the windows error reporting service to see if the problem stops.

  Read the article

• Specify drive letters during installation

  - by Seva Alekseyev

  Hi all, The hard drive has two partitions. I'm installing Windows 7 on the second one. It automatically gets assigned the drive letter C (and the first partition becomes D). Is there any way to override this assignment during installation? It's a dual-boot system, and I want drive letters to be consistent. On the vanilla drive selection dialog, there's no letter assignment UI.

  Read the article

• Make a bootable USB drive that can install both Windows XP and Ubuntu

  - by Utkarsh

  I have ISO images for both Ubuntu and Windows XP. I want to host both of them on a USB drive so that I can install either without needing installation CDs (I don't have a CD drive). How can I do that? SO, I want to have both Windows XP and Ubuntu on my USB Drive so that i could install any one of tem just from a USB. I do not have CD Drive thats why i wanna do that. I have ISO image of both ubuntu and windows xp

  Read the article

• How should I use my new SSD drive?

  - by jasondavis

  I just built a new PC the other day. Specs... Processor: Intel i7-930 quad core CPU CPU Cooler: COOLER MASTER Hyper 212 Motherboard: AsRock X58 Extreme 3 RAM/Memory: 6gb G-Skill tripple channel DDR3 memory (3 sticks of 2gb planning to get another kit to make it 12gb total soon) Operating System Hard drive: Intel X25-M 80GB Mainstream SATA2 Solid State Drive Video Cards: 2 XFX ATI Redeon HD 4650 cards to run 3-4 monitors Case: Lian Li PC-B10 Midtower case Power Supply: Antec TruePower New TP-750 Blue 750W Operating System Windows 7 Pro 64bit Not sure if the specs are helpful at all but I posted them just in case. So I got everything put together and running great so far but I need some advice/ideas/help/tips. I got the SSD drive in hopes of using it strictly for my windows 7 install along with all my other programs I install. I am then going to get another drive or 2 just for data (video,music,photos, etc). So my plan is to just install the new data drives and then in windows 7 I will change my "My documents" "My Music" "My Video" "MY Photos" library's to be located on the data drives instead of the OS SSD drive. I would ultimately like to install all my programs with my windows install on the SSD drive and then create an IMAGE of the drive and then 6 months down the road if things are sluggish I can just wipe the drive and restore my IMAGE with all my programs and settings in tact still. So here are some questions now. 1) How can I verify that TRIM is working on my new SSD? 2) Is there anything above that I missed that I should be doing? I think I once read that there is a page file or some sort of file that windows changes a lot and that it should be moved off f an SSD an onto my data drives. DOes anyone know what I might of heard? If you do can you explain the pros and cons of doing such a thing as well as how to possibly? 3) Any tips or advice to get the best performance from all this, I built a pretty nice system and I just want to make it stay that way as long as I can.

  Read the article

• Run batch file with custom drive mappings

  - by mwolfe02

  I want to create a "mini virtual environment" to run a program. The only difference between my normal environment and the virtual one would be the drive mappings. I have an X: drive mapped to \\some\network\location I have a program myapp.exe that expects the X: drive to be mapped to C:\local\path I need to keep my X: drive mapped to \\some\network\location throughout the process I would like to be able to run the following batch file and not have it affect the current environment: subst X: C:\local\path myapp.exe

  Read the article

• IBM LTO 3 Tape drive periodically going "offline"

  - by bruno077

  I have a problem with a LTO 3 Tape Drive. I'm using Brightstor ArcServe Backup software with Windows Server 2003. Sometimes, the scheduled backups will stop working and going into "devices" inside this software reveals that the Tape Drive is offline. The only way to make it work again is uninstalling the Tape Drive's driver and rebooting the server: Windows then auto recognizes and installs the required drivers and the Tape Drive works again. Has anyone ever encountered a similar problem?

  Read the article

< Previous Page | 41 42 43 44 45 46 47 48 49 50 51 52  | Next Page >