Search Results

Search found 41582 results on 1664 pages for 'fault tolerance'.

Page 45/1664 | < Previous Page | 41 42 43 44 45 46 47 48 49 50 51 52  | Next Page >

• HP P212 hangs on Initializing

  - by user927586

  I'm in trouble... Server: HP Microserver N36L Storage: HP P212/256 with BBWC Drives: 4 WD 2 Tb While expanding the RAID 5 array from 3 to 4 drives, the server rebooted itself. Expansion was at 76%. Now at boot the P212 seems to hang on initializing. After some time screen resets and the server boots, but in the os (Windows Server 2008R2) the P212 has errors (error code 10) and it's not seen by the HP ACU. Whats' going on? It's trying to complete the expansion? It's trying to make all over the expansion? It's simply stuck? What should I do? I NEED the data on the array! PS In the server BIOS, on the hd boot priority, the server still reports the array logical drive... maybe it's a good sign... PPS I'm not at the server physical location, so I cannot tell if the drives in the array are being accessed (that would be the case if the controller it's redoing/completing the expansion process) or not right now. Bye Dario

  Read the article

• SCCM Report to identify machines with 64-bit capable hardware

  - by GAThrawn

  Currently looking at deployment options for Windows 7. One of the questions we're looking into is 32 bit vs 63 bit. I'm trying to run a SCCM report against our estate to identify which machines are 64-bit capable (whether or not they're currently running a 64-bit OS). There seem to be a few resources out on the net for this (here, here and here) but none of them seem to work right on machines running 32-bit Windows XP. 32-bit XP machines seem to always report that they're running on 32-bit hardware. The query I'm currently running is: select sys.netbios_name0, sys.Operating_System_Name_and0 as OperatingSystem, case when pr.addresswidth0=64 then '64bit OS' when pr.addresswidth0=32 then '32bit OS' end as [Operating System Type], case when pr.DataWidth0=64 then '64bit Processor' when pr.DataWidth0=32 then '32bit Processor' end as [Processor Type], case when pr.addresswidth0=32 and pr.DataWidth0=64 then 'YES' end as [32-bit OS on x64 processor] from v_r_system sys join v_gs_processor pr on sys.resourceid=pr.resourceid I've also tried this, which reports all "Windows XP Professional" systems are on "X86-based PC", not x64 based even though a number of them definitely are: select OS.Caption0, CS.SystemType0, Count(*) from dbo.v_GS_COMPUTER_SYSTEM CS Left Outer Join dbo.v_GS_OPERATING_SYSTEM OS on CS.ResourceID = OS.ResourceId Group by OS.Caption0, CS.SystemType0 Order by OS.Caption0, CS.SystemType0 For instance we have a set of Dell Latitude E4200 laptops. Some of these are running 32-bit Windows XP SP3, some of them are running 32-bit Windows 7, some are running 64-bit Windows 7. All the laptops are identical, having come from the same order. Out of these the Windows 7 (32 and 64-bit) report that the hardware is 64-bit capable, and the Windows XP machines report that they're only 32-bit capable. Does anyone know if there's another value I can query to get the hardware's capabilities correctly on XP, or is there a hotfix that will get it reporting the correct info?

  Read the article

• iPad connections to Cisco VPN error -- "Enter your user authentication"

  - by rhart

  Is anyone else having problems with the iPad IPSec (Cisco) VPN configuration? I've configured a Cisco VPN connection to a PIX 501 firewall on a 32GB Wifi Apple iPad. This is done in Settings - General - Network - VPN - Add VPN Configuration - IPSec tab. When everything is set up properly and I attempt to connect I just get a popup that says "Enter your user authentication" with no fields to enter either piece of info, and just OK and Cancel buttons. I've read about similar problems with the VPN client built into Mac OS X and the iPhone 3GS but never with the iPad. Does anybody know a solution? I'm not afraid to change the configuration of my PIX 501 if that's necessary.

  Read the article

• How to resolve "svn: Can't find a temporary directory: Internal error"?

  - by HorusKol

  I have already googled the message, and I have plenty of disk space available on the SVN server (it's about 4% usage of 150 GB). I have noticed that when I try echo $TMPDIR at the command prompt on the SVN server I get nothing. What is making this a little confusing is that I only get this message from one location when I do an svn diff (that I've tested so far) - this error is not coming up when I try from three other computers (one of which is testing against the exact same repository, the other two are different repositories on the same svn server). About the only difference I can see is that the broken working copy is connecting to the server by an IP address where all the others are using a server name (although this resolves over DNS to the same IP Address). I'm hoping that I don't have to scratch the broken working copy and checkout a new one - unfortunately, this is a legacy project and not all changes have been properly revisioned.

  Read the article

• filestream restore very slow to DR server

  - by Jim

  We are backing up a database containing 100GB of filestream data. The backup takes under two hours to write. Restoring the same database to the DR environment is taking over forty hours. We don't have the same problem with other (non-filestream) databases, including some that are much larger. How do we try and get to the bottom of the problem. The database is in full recovery mode, and we are doing a full backup. Thanks.

  Read the article

• Unable to back up SQL Server databases using a maintenance plan

  - by Stephen Jennings

  I am trying to create a maintenance plan that will run automatically and back up my SQL Server 2005 databases automatically. I create a new maintenance plan and add a "Back Up Database Task", select all databases, and choose a path to back up to. When I save and try to execute this plan, I get the following error message: =================================== Execution failed. See the maintenance plan and SQL Server Agent job history logs for details. =================================== Job 'Backup.Subplan_1' failed. (SqlManagerUI) ------------------------------ Program Location: at Microsoft.SqlServer.Management.SqlManagerUI.MaintenancePlanMenu_Run.PerformActions() I've checked the maintenance plan log, the agent log, and just about every log file I can find and there are no entries at all to help me figure out why this is failing. If I right-click on a specific database and select "Back Up", the task succeeds. I tried changing the plan to back up just that one database and it still failed. I've tried running the plan with both Windows authentication and SQL Server authentication with the sa account. I also tried specifically granting the SQL Server Agent user account full privileges on the backup folder, but it still failed. While searching the web for clues, the only solution I've run across so far suggests running sp_configure 'allow_update', 0. I tried this but allow_update was already set to 0 and it did not fix the problem. The Windows server and SQL Server have all updates applied to them. Thanks for any suggestions!

  Read the article

• iptables is not allowing me to contact my dns nameservers

  - by user1272737

  I have the follwing iptables rules: Chain INPUT (policy DROP) target prot opt source destination ACCEPT tcp -- anywhere anywhere tcp dpt:ssh ACCEPT tcp -- anywhere anywhere tcp dpt:http ACCEPT tcp -- anywhere anywhere tcp dpt:https ACCEPT tcp -- localhost.localdomain anywhere tcp dpt:mysql ACCEPT tcp -- anywhere anywhere tcp dpt:14443 ACCEPT tcp -- anywhere anywhere tcp dpt:ftp ACCEPT tcp -- anywhere anywhere tcp dpt:ftp-data ACCEPT tcp -- anywhere anywhere tcp dpt:xxxxxxx Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination When I turn off iptables I am able to use wget and all other commands. When these rules are enabled I cannot connect to any address. Any idea why this would be?

  Read the article

• Mono 2.11 on nginx using fastcgi-mono-server4 will not work

  - by fuzzycow101

  I have mono 2.11 set up with my nginx 1.0.15 webserver running on centos 6.2. I built it from source and xps2, xps4 and fastcgi-mono-server2 work as expected. The problem is when I try and run fastcgi-mono-server4. When I run: fastcgi-mono-server4 /applications=site:/:/srv/www/html/ /socket=tcp:127.0.0.1:9000 /loglevels=Debug /printlog=true Here is what I get from fastcgi-mono-server2: [2012-06-06 23:51:07Z] Debug Record received. (Type: BeginRequest, ID: 1, Length: 8) [2012-06-06 23:51:07Z] Debug Record received. (Type: Params, ID: 1, Length: 801) [2012-06-06 23:51:07Z] Debug Record received. (Type: Params, ID: 1, Length: 0) [2012-06-06 23:51:07Z] Debug Read parameter. (QUERY_STRING = ) [2012-06-06 23:51:07Z] Debug Read parameter. (REQUEST_METHOD = GET) [2012-06-06 23:51:07Z] Debug Read parameter. (CONTENT_TYPE = ) [2012-06-06 23:51:07Z] Debug Read parameter. (CONTENT_LENGTH = ) [2012-06-06 23:51:07Z] Debug Read parameter. (SCRIPT_NAME = /) [2012-06-06 23:51:07Z] Debug Read parameter. (REQUEST_URI = /) [2012-06-06 23:51:07Z] Debug Read parameter. (DOCUMENT_URI = /) [2012-06-06 23:51:07Z] Debug Read parameter. (DOCUMENT_ROOT = /srv/www/html) [2012-06-06 23:51:07Z] Debug Read parameter. (SERVER_PROTOCOL = HTTP/1.1) [2012-06-06 23:51:07Z] Debug Read parameter. (GATEWAY_INTERFACE = CGI/1.1) [2012-06-06 23:51:07Z] Debug Read parameter. (SERVER_SOFTWARE = nginx/1.0.15) [2012-06-06 23:51:07Z] Debug Read parameter. (REMOTE_ADDR = 192.168.128.121) [2012-06-06 23:51:07Z] Debug Read parameter. (REMOTE_PORT = 62326) [2012-06-06 23:51:07Z] Debug Read parameter. (SERVER_ADDR = 192.168.128.125) [2012-06-06 23:51:07Z] Debug Read parameter. (SERVER_PORT = 80) [2012-06-06 23:51:07Z] Debug Read parameter. (SERVER_NAME = site) [2012-06-06 23:51:07Z] Debug Read parameter. (REDIRECT_STATUS = 200) [2012-06-06 23:51:07Z] Debug Read parameter. (PATH_INFO = ) [2012-06-06 23:51:07Z] Debug Read parameter. (SCRIPT_FILENAME = /srv/www/html/) [2012-06-06 23:51:07Z] Debug Read parameter. (HTTP_HOST = site) [2012-06-06 23:51:07Z] Debug Read parameter. (HTTP_USER_AGENT = Mozilla/5.0 (Windows NT 6.1; WOW64; rv:13.0) Gecko/20100101 Firefox/13.0) [2012-06-06 23:51:07Z] Debug Read parameter. (HTTP_ACCEPT = text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8) [2012-06-06 23:51:07Z] Debug Read parameter. (HTTP_ACCEPT_LANGUAGE = en-us,en;q=0.5) [2012-06-06 23:51:07Z] Debug Read parameter. (HTTP_ACCEPT_ENCODING = gzip, deflate) [2012-06-06 23:51:07Z] Debug Read parameter. (HTTP_CONNECTION = keep-alive) [2012-06-06 23:51:07Z] Debug Read parameter. (HTTP_COOKIE = ASP.NET_SessionId=0176BE8FC161E702439D3C91) [2012-06-06 23:51:07Z] Debug Record received. (Type: StandardInput, ID: 1, Length: 0) [2012-06-06 23:51:08Z] Debug Record sent. (Type: StandardOutput, ID: 1, Length: 196) [2012-06-06 23:51:08Z] Debug Record sent. (Type: StandardOutput, ID: 1, Length: 128) [2012-06-06 23:51:08Z] Debug Record sent. (Type: StandardOutput, ID: 1, Length: 0) [2012-06-06 23:51:08Z] Debug Record sent. (Type: EndRequest, ID: 1, Length: 8) And this is what I get from fastcgi-mono-server4: [2012-06-06 23:50:52Z] Debug Record received. (Type: BeginRequest, ID: 1, Length: 8) [2012-06-06 23:50:52Z] Debug Record received. (Type: Params, ID: 1, Length: 801) [2012-06-06 23:50:52Z] Debug Record received. (Type: Params, ID: 1, Length: 0) [2012-06-06 23:50:52Z] Debug Read parameter. (QUERY_STRING = ) [2012-06-06 23:50:52Z] Debug Read parameter. (REQUEST_METHOD = GET) [2012-06-06 23:50:52Z] Debug Read parameter. (CONTENT_TYPE = ) [2012-06-06 23:50:52Z] Debug Read parameter. (CONTENT_LENGTH = ) [2012-06-06 23:50:52Z] Debug Read parameter. (SCRIPT_NAME = /) [2012-06-06 23:50:52Z] Debug Read parameter. (REQUEST_URI = /) [2012-06-06 23:50:52Z] Debug Read parameter. (DOCUMENT_URI = /) [2012-06-06 23:50:52Z] Debug Read parameter. (DOCUMENT_ROOT = /srv/www/html) [2012-06-06 23:50:52Z] Debug Read parameter. (SERVER_PROTOCOL = HTTP/1.1) [2012-06-06 23:50:52Z] Debug Read parameter. (GATEWAY_INTERFACE = CGI/1.1) [2012-06-06 23:50:52Z] Debug Read parameter. (SERVER_SOFTWARE = nginx/1.0.15) [2012-06-06 23:50:52Z] Debug Read parameter. (REMOTE_ADDR = 192.168.128.121) [2012-06-06 23:50:52Z] Debug Read parameter. (REMOTE_PORT = 62326) [2012-06-06 23:50:52Z] Debug Read parameter. (SERVER_ADDR = 192.168.128.125) [2012-06-06 23:50:52Z] Debug Read parameter. (SERVER_PORT = 80) [2012-06-06 23:50:52Z] Debug Read parameter. (SERVER_NAME = site) [2012-06-06 23:50:52Z] Debug Read parameter. (REDIRECT_STATUS = 200) [2012-06-06 23:50:52Z] Debug Read parameter. (PATH_INFO = ) [2012-06-06 23:50:52Z] Debug Read parameter. (SCRIPT_FILENAME = /srv/www/html/) [2012-06-06 23:50:52Z] Debug Read parameter. (HTTP_HOST = site) [2012-06-06 23:50:52Z] Debug Read parameter. (HTTP_USER_AGENT = Mozilla/5.0 (Windows NT 6.1; WOW64; rv:13.0) Gecko/20100101 Firefox/13.0) [2012-06-06 23:50:52Z] Debug Read parameter. (HTTP_ACCEPT = text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8) [2012-06-06 23:50:52Z] Debug Read parameter. (HTTP_ACCEPT_LANGUAGE = en-us,en;q=0.5) [2012-06-06 23:50:52Z] Debug Read parameter. (HTTP_ACCEPT_ENCODING = gzip, deflate) [2012-06-06 23:50:52Z] Debug Read parameter. (HTTP_CONNECTION = keep-alive) [2012-06-06 23:50:52Z] Debug Read parameter. (HTTP_COOKIE = ASP.NET_SessionId=0176BE8FC161E702439D3C91) [2012-06-06 23:50:53Z] Debug Record received. (Type: StandardInput, ID: 1, Length: 0) [2012-06-06 23:50:53Z] Debug Record sent. (Type: EndRequest, ID: 1, Length: 8) I do not see what I am doing wrong. Any help would be great.

  Read the article

• Java error starting with "log4j:WARN No appenders could be found for logger" in ZuckerReports SugarC

  - by Tom McDonnell

  Greetings all. I apologise for posting this problem here, but I do so in desperation after receiving no response on the SugarCRM forums. Even if a reader is unfamiliar with ZuckerReports or SugarCRM some general advice on Java may be of use to me. I have installed ZuckerReports v1.12 in SugarCRM 5.5.1. When I attempt to run a report I get the following error message. cmdline: javaw -classpath "custom/ZuckerReports/resources/;custom/ZuckerReports/resources/contact_counts_by_first_name.jasper_files/;modules/ZuckerReports/jasper/ant-1.7.1.jar;modules/ZuckerReports/jasper/antlr-2.7.6.jar;modules/ZuckerReports/jasper/asm-attrs.jar;modules/ZuckerReports/jasper/asm.jar;modules/ZuckerReports/jasper/barbecue-1.5-beta1.jar;modules/ZuckerReports/jasper/barcode4j-2.0.jar;modules/ZuckerReports/jasper/batik-anim.jar;modules/ZuckerReports/jasper/batik-awt-util.jar;modules/ZuckerReports/jasper/batik-bridge.jar;modules/ZuckerReports/jasper/batik-css.jar;modules/ZuckerReports/jasper/batik-dom.jar;modules/ZuckerReports/jasper/batik-ext.jar;modules/ZuckerReports/jasper/batik-gvt.jar;modules/ZuckerReports/jasper/batik-parser.jar;modules/ZuckerReports/jasper/batik-script.jar;modules/ZuckerReports/jasper/batik-svg-dom.jar;modules/ZuckerReports/jasper/batik-svggen.jar;modules/ZuckerReports/jasper/batik-util.jar;modules/ZuckerReports/jasper/batik-xml.jar;modules/ZuckerReports/jasper/bcel-5.2.jar;modules/ZuckerReports/jasper/bsh-2.0b4.jar;modules/ZuckerReports/jasper/castor-1.2.jar;modules/ZuckerReports/jasper/cglib-2.1.jar;modules/ZuckerReports/jasper/cincom-jr-xmla.jar;modules/ZuckerReports/jasper/commons-beanutils-1.8.2.jar;modules/ZuckerReports/jasper/commons-collections-3.2.1.jar;modules/ZuckerReports/jasper/commons-dbcp-1.2.2.jar;modules/ZuckerReports/jasper/commons-digester-1.7.jar;modules/ZuckerReports/jasper/commons-javaflow-20060411.jar;modules/ZuckerReports/jasper/commons-logging-1.1.jar;modules/ZuckerReports/jasper/commons-math-1.0.jar;modules/ZuckerReports/jasper/commons-pool-1.3.jar;modules/ZuckerReports/jasper/commons-vfs-1.0.jar;modules/ZuckerReports/jasper/dom4j-1.6.jar;modules/ZuckerReports/jasper/ehcache-1.1.jar;modules/ZuckerReports/jasper/eigenbase-properties-1.1.0.10924.jar;modules/ZuckerReports/jasper/eigenbase-resgen-1.3.0.11873.jar;modules/ZuckerReports/jasper/eigenbase-xom-1.3.0.11999.jar;modules/ZuckerReports/jasper/ejb3-persistence.jar;modules/ZuckerReports/jasper/groovy-all-1.5.5.jar;modules/ZuckerReports/jasper/hibernate-annotations.jar;modules/ZuckerReports/jasper/hibernate-commons-annotations.jar;modules/ZuckerReports/jasper/hibernate3.jar;modules/ZuckerReports/jasper/hsqldb-1.8.0-10.jar;modules/ZuckerReports/jasper/iText-2.1.0.jar;modules/ZuckerReports/jasper/iTextAsian.jar;modules/ZuckerReports/jasper/jakarta-bcel-20050813.jar;modules/ZuckerReports/jasper/jasperreports-3.7.1.jar;modules/ZuckerReports/jasper/jasperreports-chart-themes-3.6.2.jar;modules/ZuckerReports/jasper/jasperreports-extensions-3.5.3.jar;modules/ZuckerReports/jasper/jasperreports-fonts-3.6.1.jar;modules/ZuckerReports/jasper/javacup.jar;modules/ZuckerReports/jasper/javassist-3.4.GA.jar;modules/ZuckerReports/jasper/jaxen-1.1.1.jar;modules/ZuckerReports/jasper/jcommon-1.0.15.jar;modules/ZuckerReports/jasper/jdt-compiler-3.1.1.jar;modules/ZuckerReports/jasper/jfreechart-1.0.12.jar;modules/ZuckerReports/jasper/jpa.jar;modules/ZuckerReports/jasper/js_activation-1.1.jar;modules/ZuckerReports/jasper/js_axis-1.4patched.jar;modules/ZuckerReports/jasper/js_commons-codec-1.3.jar;modules/ZuckerReports/jasper/js_commons-discovery-0.2.jar;modules/ZuckerReports/jasper/js_commons-httpclient-3.1.jar;modules/ZuckerReports/jasper/js_jasperserver-common-ws-3.5.0.jar;modules/ZuckerReports/jasper/js_jaxrpc.jar;modules/ZuckerReports/jasper/js_mail-1.4.jar;modules/ZuckerReports/jasper/js_saaj-api-1.3.jar;modules/ZuckerReports/jasper/js_wsdl4j-1.5.1.jar;modules/ZuckerReports/jasper/jta.jar;modules/ZuckerReports/jasper/jxl-2.6.jar;modules/ZuckerReports/jasper/log4j-1.2.15.jar;modules/ZuckerReports/jasper/mondrian-3.1.1.12687-Jaspersoft.jar;modules/ZuckerReports/jasper/mysql-connector-java-3.1.11-bin.jar;modules/ZuckerReports/jasper/olap4j-0.9.7.145.jar;modules/ZuckerReports/jasper/png-encoder-1.5.jar;modules/ZuckerReports/jasper/poi-3.2-FINAL-20081019.jar;modules/ZuckerReports/jasper/rex-20080421.jar;modules/ZuckerReports/jasper/rhino-1.7R1.jar;modules/ZuckerReports/jasper/saaj-api-1.3.jar;modules/ZuckerReports/jasper/slf4j-api.jar;modules/ZuckerReports/jasper/slf4j-log4j12.jar;modules/ZuckerReports/jasper/spring.jar;modules/ZuckerReports/jasper/sqleonardo-2007.03.jar;modules/ZuckerReports/jasper/swingx-2007_10_07.jar;modules/ZuckerReports/jasper/xml-apis-ext.jar;modules/ZuckerReports/jasper/xml-apis.jar;modules/ZuckerReports/jasper/zuckerreports-1.0.jar" at.go_mobile.zuckerreports.JasperBatchMain custom/ZuckerReports/temp/aff882c1-684b-d2de-403e-4be367bc2f5f/cmd.properties 2&1 JasperBatchMain :: loading jasper design custom/ZuckerReports/resources/contact_counts_by_first_name.jasper JasperBatchMain :: getParameterValue(REPORT_PARAMETERS_MAP, java.util.Map) = null JasperBatchMain :: getParameterValue(JASPER_REPORT, net.sf.jasperreports.engine.JasperReport) = null JasperBatchMain :: getParameterValue(REPORT_CONNECTION, java.sql.Connection) = null JasperBatchMain :: getParameterValue(REPORT_MAX_COUNT, java.lang.Integer) = null JasperBatchMain :: getParameterValue(REPORT_DATA_SOURCE, net.sf.jasperreports.engine.JRDataSource) = null JasperBatchMain :: getParameterValue(REPORT_SCRIPTLET, net.sf.jasperreports.engine.JRAbstractScriptlet) = null JasperBatchMain :: getParameterValue(REPORT_LOCALE, java.util.Locale) = null JasperBatchMain :: getParameterValue(REPORT_RESOURCE_BUNDLE, java.util.ResourceBundle) = null JasperBatchMain :: getParameterValue(REPORT_TIME_ZONE, java.util.TimeZone) = null JasperBatchMain :: getParameterValue(REPORT_FORMAT_FACTORY, net.sf.jasperreports.engine.util.FormatFactory) = null JasperBatchMain :: getParameterValue(REPORT_CLASS_LOADER, java.lang.ClassLoader) = null JasperBatchMain :: getParameterValue(REPORT_URL_HANDLER_FACTORY, java.net.URLStreamHandlerFactory) = null JasperBatchMain :: getParameterValue(REPORT_FILE_RESOLVER, net.sf.jasperreports.engine.util.FileResolver) = null JasperBatchMain :: getParameterValue(REPORT_VIRTUALIZER, net.sf.jasperreports.engine.JRVirtualizer) = null JasperBatchMain :: getParameterValue(IS_IGNORE_PAGINATION, java.lang.Boolean) = null JasperBatchMain :: getParameterValue(REPORT_TEMPLATES, java.util.Collection) = null log4j:WARN No appenders could be found for logger (net.sf.jasperreports.extensions.ExtensionsEnviron ment). log4j:WARN Please initialize the log4j system properly. Exception in thread "main" java.lang.IllegalArgumentException: Null 'key' argument. at org.jfree.data.DefaultKeyedValues.setValue(Default KeyedValues.java:229) at org.jfree.data.DefaultKeyedValues2D.setValue(Defau ltKeyedValues2D.java:337) at org.jfree.data.DefaultKeyedValues2D.addValue(Defau ltKeyedValues2D.java:303) at org.jfree.data.category.DefaultCategoryDataset.add Value(DefaultCategoryDataset.java:222) at net.sf.jasperreports.charts.fill.JRFillCategoryDat aset.customIncrement(JRFillCategoryDataset.java:14 3) at net.sf.jasperreports.engine.fill.JRFillElementData set.increment(JRFillElementDataset.java:175) at net.sf.jasperreports.engine.fill.JRCalculator.calc ulateVariables(JRCalculator.java:148) at net.sf.jasperreports.engine.fill.JRVerticalFiller. fillDetail(JRVerticalFiller.java:736) at net.sf.jasperreports.engine.fill.JRVerticalFiller. fillReportContent(JRVerticalFiller.java:272) at net.sf.jasperreports.engine.fill.JRVerticalFiller. fillReport(JRVerticalFiller.java:114) at net.sf.jasperreports.engine.fill.JRBaseFiller.fill (JRBaseFiller.java:923) at net.sf.jasperreports.engine.fill.JRBaseFiller.fill (JRBaseFiller.java:826) at net.sf.jasperreports.engine.fill.JRFiller.fillRepo rt(JRFiller.java:59) at at.go_mobile.zuckerreports.JasperBatchMain.main(Ja sperBatchMain.java:126) The same report runs correctly in another SugarCRM installation on the same server. The installation in which the report runs correctly is of the same version, and has the same version of the ZuckerReports module. The report previously ran correctly on both installations. I think that the only changes that have been made on the installation in which the report now does not work since the report was last successfully run are the additions of a few custom fields in the Contacts module. These changes should have nothing to do with ZuckerReports. I have tried uninstalling and reinstalling the ZuckerReports module, but the problem remains. A google search for the warnings given in the error message ie. * log4j:WARN No appenders could be found for logger (net.sf.jasperreports.extensions.ExtensionsEnviron ment). * log4j:WARN Please initialize the log4j system properly. Returns a few links (not specific to ZuckerReports) with tips similar to the following: * log4j.properties or log4j.xml needs to be on the classpath where log4j can find it. I cannot find a file with either of those names anywhere on my server, and yet the report can be run successfully on one of my SugarCRM installations. So I figure log4j must be being configured another way. Can anyone suggest a way to solve this problem? Or explain how I might discover how log4j is configured in ZuckerReports? Or explain how I might compare the working with the non-working installation in order to help find a solution? (I have tried searching for files containing "log4j" in both installations and comparing but all I can find are .jar files (nothing I can read with a text editor), and the .jar files found in each installation appear to be the same.)

  Read the article

• Serial connection over a single USB cable (Windows to linux, or linux to linux)

  - by andyortlieb

  I'm helping out with a project for an embedded device that only has USB and no serial. This device is running Linux. These days, when we need to connect to a serial port on a device we typically use a USB to serial adapter (on something like a phone system or a load balancing device, etc). I would like to know if it is possible to have the host device behave as though it were a serial adapter, thus removing the need for one. Given the nature of USB, is this approach even necessary? To recap, I would like to be able to connect a single A-to-A USB cable from my workstation (be it windows or linux) to this device, for the purpose of administration (especially initial setup), using minicom, putty or hyperterminal. Thanks

  Read the article

• ntrights equivalent/replacement for Server 2008

  - by Chris J

  Hi all, Does anyone know what or if there exists a replacement utility for the Server 2000/Server 2003 command line tool ntrights on Server 2008? More info on this utility (for those that don't know what it is) is in MSDN KB 315276.

  Read the article

• Can't get Postfix Admin to use Dovecot password hashing

  - by Paul

  I'm setting up Postfix Admin 2.91 and trying to use dovecot:SHA512-CRYPT for password hashing. In config.inc.php I have set: // dovecot:CRYPT-METHOD = use dovecotpw -s 'CRYPT-METHOD'. Example: dovecot:CRAM-MD5 // (WARNING: don't use dovecot:* methods that include the username in the hash - you won't be able to login to PostfixAdmin in this case) $CONF['encrypt'] = 'dovecot:SHA512-CRYPT'; // If you use the dovecot encryption method: where is the dovecotpw binary located? // for dovecot 1.x // $CONF['dovecotpw'] = "/usr/sbin/dovecotpw"; // for dovecot 2.x (dovecot 2.0.0 - 2.0.7 is not supported!) $CONF['dovecotpw'] = "/usr/sbin/doveadm pw"; I have also tried SHA256-CRYPT and MD5-CRYPT with same results (as I understand it, these do not include usernames in the hash) In running setup.php, I get the following message when trying to create an admin account: can't encrypt password with dovecotpw, see error log for details Server error log reports: 1624#0: *6 FastCGI sent in stderr: "PHP message: dovecotpw password encryption failed. PHP message: STDERR output: sh: 1: /usr/sbin/doveadm: not found" while reading response header from upstream <...> upstream: "fastcgi://unix:/var/run/php5-fpm.sock:" <...> A couple quick checks: # ll /usr/sbin/doveadm -rwxr-xr-x 1 root root 423264 Feb 13 23:23 /usr/bin/doveadm* # doveadm pw -l CRYPT MD5 MD5-CRYPT SHA SHA1 SHA256 SHA512 SMD5 SSHA SSHA256 SSHA512 PLAIN CLEAR CLEARTEXT PLAIN-TRUNC CRAM-MD5 SCRAM-SHA-1 HMAC-MD5 DIGEST-MD5 PLAIN-MD4 PLAIN-MD5 LDAP-MD5 LANMAN NTLM OTP SKEY RPA SHA256-CRYPT SHA512-CRYPT # doveadmin pw -s SHA512-CRYPT Enter new password: Retype new password: {SHA512-CRYPT}$6$<long string here>/ Using Dovecot 2.2, PHP 5.5, MariaDB 10, Postfix 2.11, nginx 1.6.0, Ubuntu 12.04.

  Read the article

• DNS lookup failed --- dig: couldn't get address for 'ns1.p34.dynect.net': failure

  - by Udit Gupta

  I am a Network Admin from India, managing a large University Network of more than 15000 users. Here goes my problem - My DNS is unable to get ip address for ns1.p34.dynect.net. when i use dig +trace twitter.com on my DNS Server i get this messages:- dig: couldn't get address for 'ns1.p34.dynect.net': failure and this is happening with all those sites listed with dynect.net like twitter,linkedin,quora etc. Find the attached screen shot for the same message. Right now I have temporally fixed (not actually fixed) the problem using Google DNS (8.8.8.8) What could be the issue as It is able to resolve all other sites perfectlly. Thanks Edit: As suggested in answer, I am attaching one more screen shot.

  Read the article

• AWS Cloud Formation.Requires capabilities : [CAPABILITY_IAM] (Child Stack)

  - by Drew Khoury

  I'm running a CloudFormation template in the AWS Console. Running Stack Directly I started with a template that used IAM resources, and the console prompts me to acknowledge IAM capabilities when running the stack directly. Running Stack as a child I then tried to call the same stack from a parent stack and did not receive the same prompt. The stack then failed with the message: Requires capabilities : [CAPABILITY_IAM] Research The docs indicate that I can run CF scripts in a number of ways. There's plenty of docs around CLI/API and supplying the capability parameter, but there appears to be no information about how to make sure it's applied when running through the console. http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/using-iam-template.html IAM Resources in AWS CloudFormation Templates CF Console CLI API What I've done / What I think I've raised an issue via the forum for now, but no response (yet): https://forums.aws.amazon.com/thread.jspa?threadID=139160 I suspect this is a bug in the Console, as there doesn't appear to be any documentation of how to change the behaviour via the console and as far as I'm aware this should just work. Anyone came across the same problem, or can report that it's working fine for them?

  Read the article

• Cannot determine ethernet address for proxy ARP on PPTP

  - by Linux Intel

  I installed pptp server on a centos 6 64bit server PPTP Server ip : 55.66.77.10 PPTP Local ip : 10.0.0.1 Client1 IP : 10.0.0.60 centos 5 64bit Client2 IP : 10.0.0.61 centos5 64bit PPTP Server can ping Client1 And client 1 can ping PPTP Server PPTP Server can ping Client2 And client 2 can ping PPTP Server The problem is client 1 can not ping Client 2 and i get this error also on PPTP server error log Cannot determine ethernet address for proxy ARP Ping from Client2 to Client1 PING 10.0.0.60 (10.0.0.60) 56(84) bytes of data. --- 10.0.0.60 ping statistics --- 6 packets transmitted, 0 received, 100% packet loss, time 5000ms route -n on PPTP Server Destination Gateway Genmask Flags Metric Ref Use Iface 10.0.0.60 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0 10.0.0.61 0.0.0.0 255.255.255.255 UH 0 0 0 ppp1 55.66.77.10 0.0.0.0 255.255.255.248 U 0 0 0 eth0 10.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 eth0 0.0.0.0 55.66.77.19 0.0.0.0 UG 0 0 0 eth0 route -n On Client 1 Destination Gateway Genmask Flags Metric Ref Use Iface 10.0.0.1 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0 55.66.77.10 70.14.13.19 255.255.255.255 UGH 0 0 0 eth0 10.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 eth1 0.0.0.0 70.14.13.19 0.0.0.0 UG 0 0 0 eth0 route -n On Client 2 Destination Gateway Genmask Flags Metric Ref Use Iface 10.0.0.1 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0 55.66.77.10 84.56.120.60 255.255.255.255 UGH 0 0 0 eth1 10.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 eth0 0.0.0.0 84.56.120.60 0.0.0.0 UG 0 0 0 eth1 cat /etc/ppp/options.pptpd on PPTP server ############################################################################### # $Id: options.pptpd,v 1.11 2005/12/29 01:21:09 quozl Exp $ # # Sample Poptop PPP options file /etc/ppp/options.pptpd # Options used by PPP when a connection arrives from a client. # This file is pointed to by /etc/pptpd.conf option keyword. # Changes are effective on the next connection. See "man pppd". # # You are expected to change this file to suit your system. As # packaged, it requires PPP 2.4.2 and the kernel MPPE module. ############################################################################### # Authentication # Name of the local system for authentication purposes # (must match the second field in /etc/ppp/chap-secrets entries) name pptpd # Strip the domain prefix from the username before authentication. # (applies if you use pppd with chapms-strip-domain patch) #chapms-strip-domain # Encryption # (There have been multiple versions of PPP with encryption support, # choose with of the following sections you will use.) # BSD licensed ppp-2.4.2 upstream with MPPE only, kernel module ppp_mppe.o # {{{ refuse-pap refuse-chap refuse-mschap # Require the peer to authenticate itself using MS-CHAPv2 [Microsoft # Challenge Handshake Authentication Protocol, Version 2] authentication. require-mschap-v2 # Require MPPE 128-bit encryption # (note that MPPE requires the use of MSCHAP-V2 during authentication) require-mppe-128 # }}} # OpenSSL licensed ppp-2.4.1 fork with MPPE only, kernel module mppe.o # {{{ #-chap #-chapms # Require the peer to authenticate itself using MS-CHAPv2 [Microsoft # Challenge Handshake Authentication Protocol, Version 2] authentication. #+chapms-v2 # Require MPPE encryption # (note that MPPE requires the use of MSCHAP-V2 during authentication) #mppe-40 # enable either 40-bit or 128-bit, not both #mppe-128 #mppe-stateless # }}} # Network and Routing # If pppd is acting as a server for Microsoft Windows clients, this # option allows pppd to supply one or two DNS (Domain Name Server) # addresses to the clients. The first instance of this option # specifies the primary DNS address; the second instance (if given) # specifies the secondary DNS address. #ms-dns 10.0.0.1 #ms-dns 10.0.0.2 # If pppd is acting as a server for Microsoft Windows or "Samba" # clients, this option allows pppd to supply one or two WINS (Windows # Internet Name Services) server addresses to the clients. The first # instance of this option specifies the primary WINS address; the # second instance (if given) specifies the secondary WINS address. #ms-wins 10.0.0.3 #ms-wins 10.0.0.4 # Add an entry to this system's ARP [Address Resolution Protocol] # table with the IP address of the peer and the Ethernet address of this # system. This will have the effect of making the peer appear to other # systems to be on the local ethernet. # (you do not need this if your PPTP server is responsible for routing # packets to the clients -- James Cameron) proxyarp # Normally pptpd passes the IP address to pppd, but if pptpd has been # given the delegate option in pptpd.conf or the --delegate command line # option, then pppd will use chap-secrets or radius to allocate the # client IP address. The default local IP address used at the server # end is often the same as the address of the server. To override this, # specify the local IP address here. # (you must not use this unless you have used the delegate option) #10.8.0.100 # Logging # Enable connection debugging facilities. # (see your syslog configuration for where pppd sends to) debug # Print out all the option values which have been set. # (often requested by mailing list to verify options) #dump # Miscellaneous # Create a UUCP-style lock file for the pseudo-tty to ensure exclusive # access. lock # Disable BSD-Compress compression nobsdcomp # Disable Van Jacobson compression # (needed on some networks with Windows 9x/ME/XP clients, see posting to # poptop-server on 14th April 2005 by Pawel Pokrywka and followups, # http://marc.theaimsgroup.com/?t=111343175400006&r=1&w=2 ) novj novjccomp # turn off logging to stderr, since this may be redirected to pptpd, # which may trigger a loopback nologfd # put plugins here # (putting them higher up may cause them to sent messages to the pty) cat /etc/ppp/options.pptp on Client1 and Client2 ############################################################################### # $Id: options.pptp,v 1.3 2006/03/26 23:11:05 quozl Exp $ # # Sample PPTP PPP options file /etc/ppp/options.pptp # Options used by PPP when a connection is made by a PPTP client. # This file can be referred to by an /etc/ppp/peers file for the tunnel. # Changes are effective on the next connection. See "man pppd". # # You are expected to change this file to suit your system. As # packaged, it requires PPP 2.4.2 or later from http://ppp.samba.org/ # and the kernel MPPE module available from the CVS repository also on # http://ppp.samba.org/, which is packaged for DKMS as kernel_ppp_mppe. ############################################################################### # Lock the port lock # Authentication # We don't need the tunnel server to authenticate itself noauth # We won't do PAP, EAP, CHAP, or MSCHAP, but we will accept MSCHAP-V2 # (you may need to remove these refusals if the server is not using MPPE) refuse-pap refuse-eap refuse-chap refuse-mschap # Compression # Turn off compression protocols we know won't be used nobsdcomp nodeflate # Encryption # (There have been multiple versions of PPP with encryption support, # choose which of the following sections you will use. Note that MPPE # requires the use of MSCHAP-V2 during authentication) # # Note that using PPTP with MPPE and MSCHAP-V2 should be considered # insecure: # http://marc.info/?l=pptpclient-devel&m=134372640219039&w=2 # https://github.com/moxie0/chapcrack/blob/master/README.md # http://technet.microsoft.com/en-us/security/advisory/2743314 # http://ppp.samba.org/ the PPP project version of PPP by Paul Mackarras # ppp-2.4.2 or later with MPPE only, kernel module ppp_mppe.o # If the kernel is booted in FIPS mode (fips=1), the ppp_mppe.ko module # is not allowed and PPTP-MPPE is not available. # {{{ # Require MPPE 128-bit encryption #require-mppe-128 # }}} # http://mppe-mppc.alphacron.de/ fork from PPP project by Jan Dubiec # ppp-2.4.2 or later with MPPE and MPPC, kernel module ppp_mppe_mppc.o # {{{ # Require MPPE 128-bit encryption #mppe required,stateless # }}} IPtables is stopped on clients and server, Also net.ipv4.ip_forward = 1 is enabled on PPTP Server. How can i solve this problem .?

  Read the article

• Dell VRTX - slow cluster shared storage

  - by NorbyTheGeek

  I have a brand new Dell VRTX box set up as a Failover Cluster running HA Hyper-V virtual machines. This is my first time setting up clustering, and my first time with one of these boxes, so I'm sure I've missed something. The virtual machines are experiencing high disk latency and bad performance when accessing their VHD(x) files located on a Cluster Shared Volume. The VRTX has 10 x 900 GB 10K SAS drives in RAID 6 configuration, and the VRTX has the redundant Shared PERC 8 controllers. Both blades have full access to the virtual disks. There are two M520 blades installed, each with 128 GB RAM. MPIO is configured for the PERC 8 controllers. Operating system on the blades is Server 2012 (NOT R2). The RAID 6 array is split into a small (8 GB) volume for cluster quorum witness and a large (6.5 TB) volume for a Cluster Shared Volume (mounted on the nodes as C:\ClusterStorage\Volume1) An example of slow disk access: logging into a Server 2012 VM and having Server Manager come up automatically. Disk access goes to 100%, with write speeds at 20 MB or so, read speeds of 500 KB or so, and Average Response Time of over 1000 ms, sometimes spiking at 4000-5000 ms or so. It's the latency that really worries me. Is there something specific I should look at in my configuration? It doesn't seem to matter whether I use VHD or VHDX, dynamic or static.

  Read the article

• Port forwarding on Fortigate 50B

  - by sindre j

  I have serious problems setting up port forwarding on a Fortigate 50B. The unit is basically running as factory default, the wan1 interface is connected to my fibre optic internet modem, and my lan is connected to the internal switch of the Fortigate. The factory default firewall policy allowing traffic from the internal interface to wan1 is kept and I'm able to access the interet as normal. Then I added a virtual ip and a firewall policy for allowing access from the internet to my local servers (ip 192.168.9.51) webserver (standard port 80). The settings I made are as follows. Edit Virtual IP Mapping Name : Server VIP External interface : wan1 Type : Static NAT Extermal IP Address/Range : 0.0.0.0 Mapped IP Address/Range : 192.168.9.51 Port Forwading : not checked Firewall policy Source interface/Zone : wan1 Source address : all Destination interface/Zone : internal Destination address : Server VIP Schedule : always Service : HTTP Action : ACCEPT no other settings checked What happens now is that I'm unable to access internet from my server, I'm not getting through to the webserver from internet either. I'm able to ping a site on the outside, but all web traffic is blocked, both ways. I've checked the documentation, but as far as I can tell I have set this up correctly. Anyone here with knowledge of Fortigate port forwading/NAT?

  Read the article

• Network Error: no buffer space available

  - by braindump

  After some time of running fine, one of our Windows XP SP3 machines does not open some(!) new TCP/IP connections anymore. Putty says "Network Error: no buffer space available", IE won't open any new connections but e.g. network drive mappings still work, even new ones can be established. netstat does not show more open connections that usual, ping and dns lookups work fine. Any hints?

  Read the article

• PHP bcompiler install

  - by dobs

  How to install bcompiler on Fedora, have this error: [root@server server]# pecl install channel://pecl.php.net/bcompiler-0.9.1 downloading bcompiler-0.9.1.tgz ... Starting to download bcompiler-0.9.1.tgz (47,335 bytes) .............done: 47,335 bytes 10 source files, building running: phpize Configuring for: PHP Api Version: 20090626 Zend Module Api No: 20090626 Zend Extension Api No: 220090626 building in /var/tmp/pear-build-server/bcompiler-0.9.1 running: /var/tmp/bcompiler/configure checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for a sed that does not truncate output... /bin/sed checking for cc... cc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes .... /var/tmp/bcompiler/bcompiler.c:2174: ?????????: expected ‘struct zend_arg_info *’ but argument is of type ‘const struct _zend_arg_info *’ /var/tmp/bcompiler/bcompiler.c: ? ??????? ‘apc_serialize_zend_class_entry’: /var/tmp/bcompiler/bcompiler.c:3100: ??????????????: ???????????? ???????? ????????????? ?????????? ???? /var/tmp/bcompiler/bcompiler.c:3107: ??????????????: ???????? ????????? 1 ‘apc_serialize_zend_function_entry’ ???????? ????????????? ?????????? ???? /var/tmp/bcompiler/bcompiler.c:2874: ?????????: expected ‘struct zend_function_entry *’ but argument is of type ‘const struct _zend_function_entry *’ /var/tmp/bcompiler/bcompiler.c: ? ??????? ‘apc_deserialize_zend_class_entry’: /var/tmp/bcompiler/bcompiler.c:3324: ??????????????: ???????? ????????? 1 ‘apc_deserialize_zend_function_entry’ ???????? ????????????? ?????????? ???? /var/tmp/bcompiler/bcompiler.c:2900: ?????????: expected ‘struct zend_function_entry *’ but argument is of type ‘const struct _zend_function_entry *’ make: *** [bcompiler.lo] ?????? 1 ERROR: 'make' failed yum install bzip2-libs bzip2-devel - Fix it...

  Read the article

• Installing WindowsAuthentication breaks authentication / web.config?

  - by Ian Quigley

  I have a clean Windows 2008 R2 box (on a VM) and have installed IIS 7.5 with default options. I then copied a website to it (from Windows 7, IIS 7) and after a little tweaking the website is working fine. The website is currently using and working with Anonymous Authentication. I have gone back to the Windows Components/Sever Manager, Roles - Security and ticked and installed Windows Authentication. When I check my server in IIS (top level above sites) - Authentication, I see Anonymous Authentication (enabled) ASP.NET Impersonation (disabled) Forms Authentication (disbaled) Windows Authentication (enabled) When I check my default website - Authentication, I see as above but "Retrieving status" and an error dialog saying There was an error while performing this operation. Details: Filename c:\inetpub\wwwroot\screwturnwiki\web.config Line number: 96 Error: This configuration section cannot be used in this path. This happens when the section is being locked at the parent level. Locking is either by default (overriderModeDefault="Deny"), or set explicity by a location tag with overrideMode="Deny" or the legacy allowOverride="False". I have tried hand editing the web.config with no success. (How to use locking in IIS7 Configuration) UN-installing Windows Authentication happily returns my site to working with Anonymous Authentication, and allows me to enable/disable these three options. FYI. I am using ScrewTurnWiki with the Active Directory plug in. It all works fine under Windows 7 IIS 7 locally (has been for months) Web.Config <system.webServer> (edit) <handlers> ( deleted removes/adds ) </handlers> <security> <authentication> 96: <windowsAuthentication enabled="true" useKernelMode="true"> <extendedProtection tokenChecking="Allow" /> <providers> <clear /> <add value="NTLM" /> <add value="Negotiate" /> </providers> </windowsAuthentication> </authentication> </security>

  Read the article

• VSS error 521 when attempting backup

  - by blade

  Hi, I have backupassist and I attempt to run a backup, with VSS service running. However, I get this error in Windows Event Log: The backup operation that started at '?2010?-?04?-?30T01:51:15.601000000Z' has failed because the Volume Shadow Copy Service operation to create a shadow copy of the volumes being backed up failed with following error code '2155348129'. Please review the event details for a solution, and then rerun the backup operation once the issue is resolved. Code: 521. The error in backupassist is: The backup operation stopped before completing. Detailed error: ERROR - A Volume Shadow Copy Service operation error has occurred: (0x80042336) The writer experienced a partial failure. Check the component level error state for more information. Log of files successfully backed up: C:\Windows\Logs\WindowsServerBackup\Backup-29-04-2010_18-51-15.log Log of files for which backup failed: C:\Windows\Logs\WindowsServerBackup\Backup_Error-29-04-2010_18-51-15.log A Volume Shadow Copy Service operation failed. Please check "VSS" and "SPP" application event logs for more information. ERROR - A Volume Shadow Copy Service operation error has occurred: (0x80042336) The writer experienced a partial failure. Check the component level error state for more information. Any idea how to fix this? I work in a company with server engineers, they all state of having no problems with 2008 and VSS (though in the company we use predominantly 2003). Without vss working, I assume no backup application will work? Thanks

  Read the article

• Mount CIFS share gives "mount error 127 = Key has expired"

  - by djk

  I'm currently replicating the setup of a CentOS box an am running into a strange error while trying to mount a samba share that resides on a NAS. The error I'm getting is: mount error 127 = Key has expired Refer to the mount.cifs(8) manual page (e.g.man mount.cifs) The settings are identical to the old machine, the password is definitely correct as well. I have googled the issue of course, and looked at every single page that references this issue (not that many) and have still not found an answer. The older CentOS box is using version 3.0.28-0.el4.9 of Samba and the one I'm trying to setup now is 3.0.33-3.7.el5_3.1. I don't know if this has anything to do with it but it's certainly one of the only differences between the 2 setups. When I try the mount command this appears in the syslog: Sep 8 10:51:54 helvetica2 kernel: Status code returned 0xc0000072 NT_STATUS_ACCOUNT_DISABLED Sep 8 10:51:54 helvetica2 kernel: CIFS VFS: Send error in SessSetup = -127 Sep 8 10:51:54 helvetica2 kernel: CIFS VFS: cifs_mount failed w/return code = -127 The account is very much not disabled as it works on the old box using the same credentials. Has anyone else seen this problem? Thanks!

  Read the article

• TortoiseSVN hangs in Windows Server 2012 Azure VM

  - by ZaijiaN

  Following @shanselman's article on remoting into an Azure VM for development, I spun up my own VS 2013 VM, and that image runs on WS 2012. Once I was able to remote in, I started installing all my dev tools, including Tortoise SVN 1.8.3 64bit. Things went south once I started attempting to check out code from my personal svn server. It would hang and freeze often, although sometimes it would work - I was able to partially check out projects, but I would get frequent connection time out errors. My personal svn server (VisualSVN 2.7.2) runs at home on a windows 7 machine, and I have a dyndns url pointing to it. I have also configured my router to passthrough all 443 traffic to the appropriate port on the server. I self-signed a cert and made sure it was imported into the VM cert store under trusted root authorities. I have no problems connecting to my svn server from 4-5 other computers & locations. From the Azure VM, in both IE and Chrome, I can access the repository web browser with no issues. There are no outbound firewall restrictions. I have installed other SVN add-ons for Visual Studio (AnkhSVN, VisualSVN) and attempted to connect with my svn server, with largely the same results - random and persistent connection issues (hangs/timeouts). I spun up a completely fresh WS 2008 Azure VM, and installed TortoiseSVN, and had the same results. So I'm at a loss as to what the problem is and how to fix it. Web searches on tortoisesvn and windows server issues doesn't yield any current or relevant information. At this point, i'm guessing that maybe some setting or configuration that MS Azure VM images is the culprit - although I should probably attempt to spin up my own local WS VM to rule out that it's a window server issue. Any thoughts? I hope I'm just missing something really obvious!

  Read the article

• heartbeat: Bad nodename in /etc/ha.d//haresources [node1]

  - by Richard

  I'm trying to start heartbeat on Ubuntu 10.04 with service heartbeat start, but getting the following errors: heartbeat[24829]: 2011/11/22_19:31:07 ERROR: Bad nodename in /etc/ha.d//haresources [node1] heartbeat[24829]: 2011/11/22_19:31:07 ERROR: Configuration error, heartbeat not started. On on server uname -n produces loadb1, on the second server uname -n produces loadb2. The two servers can ping each other okay with those names. This is /etc/ha.d/ha.cnf on both servers: debugfile /var/log/ha-debug logfile /var/log/ha-log logfacility local0 keepalive 2 deadtime 10 udpport 694 bcast eth1 ucast eth0 my.external.ip ucast eth0 my.external.ip ucast eth1 10.0.0.5 ucast eth1 10.0.0.6 #udp eth0 node loadb1 node loadb2 auto_failback off And this is /etc/ha.d/haresources on both servers: node1 IPaddr::46.20.121.113 httpd smb dhcpd Authkeys is also set up. What am I doing wrong? The part where I'm least clear is the ucast/bcast lines.

  Read the article

• How can I configure Symantec Endpoint Protection Agent to allow access to windows shares?

  - by Peter Bernier

  I'm having some difficulties exposing a standard windows file share on a Windows Embedded Standard 2009 device that is running Symantec Endpoint Protection Agent 5.1. I'm using simply file sharing to expose a particular directory. That share is visible locally on the machine and externally visible when I disable the endpoint protection agent. I've added a rule (and moved it to the to ensure priority) allowing all hosts access on TDP ports 137,138,138,445 and another rule allowing UDP access on ports 137,138,139. When I try to connect, two endpoint protection dialogs pop up saying: Traffic has been blocked from this application: NWLINK2 IPX Protocol Driver (nwlnkipx.sys) Traffic has been blocked from this application: IPv6 driver (tcpip6.sys) I'm not using IPv6 anywhere. Interestingly, I discovered a workaround in that I can white-list all traffic from the subnet the device is on, which meets my needs, but I'm still curious as to why my original approach wasn't successful. Can anyone suggestion a reason why the above endpoint protection rules won't allow me to access windows file shares on the device?

  Read the article

< Previous Page | 41 42 43 44 45 46 47 48 49 50 51 52  | Next Page >