Search Results

Search found 8876 results on 356 pages for 'hardware raid'.

Page 45/356 | < Previous Page | 41 42 43 44 45 46 47 48 49 50 51 52  | Next Page >

  • Hardware firewall vs VMWare firewall appliance

    - by Luke
    We have a debate in our office going on whether it's necessary to get a hardware firewall or set up a virtual one on our VMWare cluster. Our environment consists of 3 server nodes (16 cores w/ 64 GB RAM each) over 2x 1 GB switches w/ an iSCSI shared storage array. Assuming that we would be dedicating resources to the VMWare appliances, would we have any benefit of choosing a hardware firewall over a virtual one? If we choose to use a hardware firewall, how would a dedicated server firewall w/ something like ClearOS compare to a Cisco firewall?

    Read the article

  • Problem with using sysprep tool for running Windows on a different Hardware

    - by Usman Ajmal
    Hi, I am using sysprep tool for running Windows 7 on a different Hardware. What I do is that run sysprep on a computer, select System Audit, check the Generalize check box, select Shutdown, click OK and wait for the computer to shutdown. When the system shuts down, I remove the hard disk from my computer and plug it into another computer having different Hardware. Then I turn ON the computer and after a series of operations (including one reboot), I eventually get to the Desktop of Windows on the changed hardware computer BUT the problem is that System Preparation Tool's start up automatically. I rebooted the computer but the System Preparation Tool start up each time. One more thing that noted was that computer gives a message at each reboot before loading Desktop that "System is now preparing your computer for first use". Any idea how can i get a clean Desktop after performing sysprep? or is there any step I am missing? Thanks a lot

    Read the article

  • Need Recommendations: Network Software and Hardware Setup for small firm

    - by Rogue
    Will be starting a small graphics design firm soon, with 20 employees. Therefore need software to manage the network. Have bought a bulk license of Windows 7. I have a spare computer which can act as a server if necessary, but its an ancient Dell machine (Pentium-III). If required I would purchase an extra machine, but would like to avoid unnecessary costs at start up. Following are the main functions that I would like to perform: Need to monitor\control network traffic and internet usage, restrict access to certain websites Alerts when access to certain software's, and when trying to tamper with privileges Ability to view desktops of any computer at any given time Limit access to certain hardware like USB ports,etc Limit access to folders on the computer Log/Report of all actions including keystrokes performed on any computer Local Network chat and talk client Collaboration and Work logs Any Software available to do all of the above and also any additional hardware required besides network switches, network card's and CAT5e cables. Any other recommendations besides the above mentioned hardware setup

    Read the article

  • Local dedicated hosting space (own hardware)

    - by Scott
    Where can I find local dedicated hosting space for my own hardware? I know I can rent dedicated hosting from various companies online, but usually I think that means I'm renting their hardware too. I just need a space with a network connection and a power outlet. That's it. How much would this cost? What would I search for? Is it available easily? Or would it only be the sort of thing huge companies would do? I'm in the greater NYC area. It's for a project I'm working on, but the thing's loud and annoying. I'd be willing to pay a little to get it out of sight and out of mind. I don't even care too much about the quality of the network connection. I'd rather not rent other people's hardware cause it probably would cost a fortune to rent a machine like this (tons of ram).

    Read the article

  • Deciding to use VM or native install for new hardware

    - by Billy Moon
    I have a Ubuntu 10.10 installation running on hardware. I upgraded the hardware, and am planning to move the system over. Whilst reading the many various ways to do this, I came across tools for making a virtual machine out of a hardware installation. I think this might make managing my server easier in the future if I run it as a virtual machine. Also, I will be able to easily split responsibilities of my server, for example running MySQL on a separate virtual machine hosted on the same physical machine. Is it a good idea to install my production server as a virtual machine inside another thin server installation? What are the pros/cons and pitfalls?

    Read the article

  • (When) Does hardware, especially the CPU(s), deliver wrong results?

    - by sub
    What I'm talking about is: Is it possible that under certain circumstances the CPU "buggs" and suddenly responses 1+1=2? In which parts of the computer can that happen (HDD, RAM, Mainboard)? What could be the causes? Bad quality? Overheating? Does that even happen? When yes, how frequently? If everything is okay with the CPU (not a single fault in production, good temperature), can that still happen sometimes? What would be the results of, let's say one to three wrong computations? This is programming related as it would be nice to know if you can even rely on the hardware to return the right results.

    Read the article

  • Freeze during Battlefield 3 - Probable Hardware issue?

    - by HendsteR
    my friend's notebook frequently freezes during BF3 sessions since ~1 1/2 months. It runs Win764Bit and he already reinstalled windows during the process, it didn't help. So we guess it might probably be a hardware issue. Now the question - which part of the hardware could effect a total freeze of the system WITHOUT getting a bluescreen? Or are there any known software issues he could also try? The hardware specs are: Acer 7745G Intel i7 720QM AMD Mobility 5850HD - Running Catalyst 11.6 now btw. (all drivers tested from 11.2 to 12.6 though) 4GB Ram 1.333MHz Oh and yeah, he just added that it crashes playing Diablo3 from time to time, too. Please help :)

    Read the article

  • Mac OS X 10.5 VNC Resolution independent of hardware display

    - by Qberticus
    Is it possible to set the VNC display resolution that is independent of the hardware resolution when you are using OS X 10.5 Screen Sharing? I have a macbook and a windows box with 3 monitors. I'd like to use the 3 monitors on my windows box to do work on my macbook when I'm at my desk. When I VNC into the macbook I only get the resolution of the hardware screen (1280x800). Instead I'd like to use two of my monitors on my windows box to display a large VNC screen from my macbook. The scaling options in the VNC clients (TightVNC and Ultr@VNC) do not adjust the actual resolution of the display they just do image processing. My ultimate goal is for someway to have a virtual display on my windows box that is from my macbook that is independent of the macbook's hardware screen.

    Read the article

  • When machine code is generated from a program how does it translates to hardware level operations ??

    - by user553492
    Like if say the instruction is something like 100010101 1010101 01010101 011101010101. Now how is this translating to an actual job of deleting something from memory? Memory consists of actual physical transistors the HOLD data. What causes them to lose that data is some external signal? I want to know how that signal is generated. Like how some binary numbers change the state of a physical transistor. Is there a level beyond machine code that isn't explicitly visible to a programmer? I have heard of microcode that handle code at hardware level, even below assembly language. But still I pretty much don't understand. Thanks!

    Read the article

  • Is a disk/ata timeout exception dangerous?

    - by j-g-faustus
    I have a few hard drives in mdadm RAID 5 configured to go to standby after a few minutes of inactivity. (Using hdparm.conf spindown_time.) At irregular intervals I get messages like these in dmesg: [ 1840.251661] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 1840.251722] ata4.00: failed command: SMART [ 1840.251758] ata4.00: cmd b0/d5:01:06:4f:c2/00:00:00:00:00/00 tag 0 pio 512 in [ 1840.251759] res 40/00:14:50:2e:04/00:00:02:00:00/40 Emask 0x4 (timeout) [ 1840.251858] ata4.00: status: { DRDY } [ 1840.251888] ata4: hard resetting link [ 1840.600742] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1840.601521] ata4.00: configured for UDMA/133 [ 1840.601547] ata4: EH complete [337877.713988] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [337877.714019] ata4.00: failed command: SMART [337877.714038] ata4.00: cmd b0/d5:01:06:4f:c2/00:00:00:00:00/00 tag 0 pio 512 in [337877.714039] res 40/00:04:90:10:81/00:00:00:00:00/40 Emask 0x4 (timeout) [337877.714089] ata4.00: status: { DRDY } [337877.714107] ata4: hard resetting link [337878.063085] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [337878.063743] ata4.00: configured for UDMA/133 [337878.063764] ata4: EH complete I think the exception is caused by smartd when a drive does not wake up quickly enough. There are no issues (that I can tell) in accessing the drives normally through the file system - it takes a few seconds longer than normal when they are asleep, but there are no exceptions. Is this something I should worry about, as a potential symptom on something that could corrupt a drive over time? Or can I safely ignore it as part of normal operation? Edit: By request: smartctl -a for sdaand sde, both disks are members of the array. If ata4is the same as scsi-4 then sde is the one that gave the error above, according to /dev/disk/by-path.

    Read the article

  • Switching mdadm to an external bitmap

    - by Oli
    I've just read this in another post about improving RAID5/6 write speeds: After increasing stripe cache & switching to external bitmap, my speeds are 160 Mb/s writes, 260 Mb/s reads. :-D I've already found out how to increase the stripe cache and this worked pretty well but I'd like to know more about an external bitmap. I have an incredibly fast (540MB/s) RAID0 SSD that would do well if a bitmap does what I think it does but I'm still very unsure. I've only known about them as long as I've known this post. A few questions: What is a bitmap (in terms of mdadm)? What are the advantages of an internal bitmap (over external)? What are the advantages of an external bitmap (over internal)? How do I switch between the two? I should add that while this is a I'm-bored-let's-break-something thread, I do value the data stored on the RAID array. If doing this is going to put data at significant risk, please let me know.

    Read the article

  • Can't start system due to mdadm failing

    - by user101212
    I used to have a 5-disk RAID5 partition, all working very well. I have then decided to add 3 more disks on it, totaling 8 equal disks. I've opened Webmin and just asked to add the disks. Then I've realized the three disks had NTFS partitions, wich mdadm didn't complain, so I tried to stop the growing to remove the Windows partitions. I've tried to remove a disk using the same Webmin, but (as you might guess and call me fool...), the system became unstable. By restarting the system, I've started receiving these messages: "udev[126]: timeout: killing '/sbin/mdadm --incremental /dev/sdh1' [311]" "udev[124]: timeout: killing '/sbin/mdadm --detail --export /dev/md0' [316]" I've formated the system disk, hoping to get a system up and running. I did that with all RAID disks disconected, so everything was fine. I then reconnected the disks, wich was also ok. And finally installed mdadm using apt-get. By reboot, the system has found the mdadm intention of growing the system, so the same messages appear again. I other words: I can't even reach a command prompt to do something. Any ideas of what to do? I believe I could turn off the system, disconnect the disks and look for the mdadm.conf file. Would that be a good idead? I'm no Linux expert, so I'm really lost here.

    Read the article

  • Poor NFS Performance: OpenFiler

    - by Safin09
    Good Day Everyone, I have an issue with OpenFiler, a Linux-based operating that converts a computer system into a SAN/NAS appliance. Here is the problem. In my environment we have two Netapp Storevault 500 appliances that I normally perform backups to a NFS share. There are two backup cronjobs that use ghettoVCB to backup two groups of VM's. One group is a pool of 3 VMs. This takes 13 mins to complete. A second job that backups a pool of 5 VMs to a 2nd Storevault appliance which takes 2 hours. We then installed Openfiler on a old server that has 2 core Xeon processors. There is a software RAID 5 process in place. When performing the same backups to a NFS Openfiler share, the first backup job, which takes 13 mins, takes around 4 hours. The second backup job, which takes 2 hours, takes almost 10 hours to complete. This is unacceptable!!!! Especially considering the strain placed on the host ESX Server. I assumed that because of the software RAID 5, the overhead on the CPU explained the long backup times. I then installed Openfiler on a 2nd server, an IBM x306 machine which has a P4 Intel processor. This time no software RAID or any RAID at all. A single 750GB hard drive that contained the OS and the rest of the disk uses to backup VMs to a NFS share. I performed the first backup job of the pool of 3 VMs. This time the backup job took 1 and 1/2 hours to complete instead of 13 mins!!!!!!!!!! Is Openfiler simply poor at being an NFS Server!!!!!!!!!!!!! Has anyone else had these issues with Openfiler?

    Read the article

  • HTG Explains: Are You Using IPv6 Yet? Should You Even Care?

    - by Chris Hoffman
    IPv6 is extremely important for the long-term health of the Internet. But is your Internet service provider providing IPv6 connectivity yet? Does your home network support it? Should you even care if you’re using IPv6 yet? Switching from IPv4 to IPv6 will give the Internet a much larger pool of IP addresses. It should also allow every device to have its own public IP address, rather than be hidden behind a NAT router. IPv6 is Important Long-Term IPv6 is very important for the long-term health of the Internet. There are only about 3.7 billion public IPv4 addresses. This may sound like a lot, but it isn’t even one IP address for each person on the planet. Considering people have more and more Internet-connected devices — everything from light bulbs to thermostats are starting to become network-connected — the lack of IP addresses is already proving to be a serious problem. This may not affect those of us in well-off developed countries just yet, but developing countries are already running out of IPv4 addresses. So, if you work at an Internet service provider, manage Internet-connected servers, or develop software or hardware — yes, you should care about IPv6! You should be deploying it and ensuring your software and hardware works properly with it. It’s important to prepare for the future before the current IPv4 situation becomes completely unworkable. But, if you’re just typical user or even a typical geek with a home Internet connection and a home network, should you really care about your home network just yet? Probably not. What You Need to Use IPv6 To use IPv6, you’ll need three things: An IPv6-Compatible Operating System: Your operating system’s software must be capable of using IPv6. All modern desktop operating systems should be compatible — Windows Vista and newer versions of Windows, as well as modern versions of Mac OS X and Linux. Windows XP doesn’t have IPv6 support installed by default, but you shouldn’t be using Windows XP anymore, anyway. A Router With IPv6 Support: Many — maybe even most — consumer routers in the wild don’t support IPv6. Check your router’s specifications details to see if it supports IPv6 if you’re curious. If you’re going to buy a new router, you’ll probably want to get one with IPv6 support to future-proof yourself. If you don’t have an IPv6-enabled router yet, you don’t need to buy a new one just to get it. An ISP With IPv6 Enabled:  Your Internet service provider must also have IPv6 set up on their end. Even if you have modern software and hardware on your end, your ISP has to provide an IPv6 connection for you to use it. IPv6 is rolling out steadily, but slowly — there’s a good chance your ISP hasn’t enabled it for you yet. How to Tell If You’re Using IPv6 The easiest way to tell if you have IPv6 connectivity is to visit a website like testmyipv6.com. This website allows you to connect to it in different ways — click the links near the top to see if you can connect to the website via different types of connections. If you can’t connect via IPv6, it’s either because your operating system is too old (unlikely), your router doesn’t support IPv6 (very possible), or because your ISP hasn’t enabled it for you yet (very likely). Now What? If you can connect to the test website above via IPv6, congratulations! Everything is working as it should. Your ISP is doing a good job of rolling out IPv6 rather than dragging its feet. There’s a good chance you won’t have IPv6 working properly, however. So what should you do about this — should you head to Amazon and buy a new IPv6-enabled router or switch to an ISP that offers IPv6? Should you use a “tunnel broker,” as the test site recommends, to tunnel into IPv6 via your IPv4 connection? Well, probably not. Typical users shouldn’t have to worry about this yet. Connecting to the Internet via IPv6 shouldn’t be perceptibly faster, for example. It’s important for operating system vendors, hardware companies, and Internet service providers to prepare for the future and get IPv6 working, but you don’t need to worry about this on your home network. IPv6 is all about future-proofing. You shouldn’t be racing to implement this at home yet or worrying about it too much — but, when you need to buy a new router, try to buy one that supports IPv6. Image Credit: Adobe of Chaos on Flickr, hisperati on Flickr, Vox Efx on Flickr     

    Read the article

  • How to let hard drive sleep in RAID1 configuration?

    - by Al Kepp
    Normally in Windows 7 a hard drive stops spinning when it is not used for a longer while. This can be configured in Windows and I use it on computers which are turned on 24/7 but not used much often. My problem is on a computer with Intel X79 chipset with an integrated RAID controller. There is Windows 7 installed on an SSD drive, and there is RAID1 array with two SATA HDD drives for data. Those SATA drives aren't used much so I'd like to let them sleep (i.e stop spinning). But they ignore settings in Windows. How to let them sleep when using RAID1? It seems to me that those drives are "unstoppable", they are spinning 24/7 even when they aren't used at all. Maybe they would behave normally if I used Windows-based software RAID, but I use hardware RAID controller. Is there a way to let them stop spinning and sleep after for example 3 or 5 hours of inactivity (i.e. the same way as they would behave in Windows without RAID)?

    Read the article

  • Stats on Screen Size for Flash Games

    - by ashes999
    I'm working on a Flash game after many, many years. I'm trying to figure out size to make my application run (eg. 600x800). Because it's a tall (not wide) game, I'm confused. I know about (and love) the Steam hardware stats. However, for Flash gaming, I have two nit-picks with their survey sample: 1) Caters to more hardcore gamers with better hardware (overall) 2) Captures only a subset of Flash gamers. Doesn't capture people who play at school, work, etc. or not netbooks and lighter machines. Are there any sort of statistics I can use to determine which size to use? Ideally, I would like to know something like: 800x600 will fit 94% of users screens 1024x768 will fit 74% of users screens 1200x960 will fit 53% of users screens etc.

    Read the article

  • Can't access my accelerated hard disk from msdos after installing linux on ssd cache

    - by Chibueze Opata
    I mistakenly installed Linux Mint on my ssd (forgot my PC actually came with one), when it detected a ~31GiB disk that it wanted to install to, I was a bit confused since I had brought out 30Gb in my primary disk for it, but I clicked continue. After installation, I tried to boot back into my Windows and it brought out some Intel Raid Disk Utility stuff saying I should disable acceleration on a disk something couldn't be found, I canceled it but whatever I tried, recovery tools, setups etc, I couldn't just access the drive which was apparently using the SSD as cache. Since then I've been stuck. I tried setting the 'raid' flag to the disk from 'gParted', still I couldn't. I tried the diskraid utility from windows recover disk, it said it couldn't detect any raid, diskpart sees the partition but doesn't see the volume, when I remove the raid flag, it sees the volume as one of raw type, and I can't access anything. I can however mount the drive from terminal in Mint and access my files, but I don't have any backup media at the moment so I can do a factory re-install. Please how do I go about solving the issue, precisely I would like to know how to boot into the drive again. Thanks!

    Read the article

  • Windows XP corrupts registry every several hours

    - by Ilya Kazakevich
    There is a Dell XPS 400 with Windows Media Center installer. It is installed on RAID (Intel Matrix Storage) which is built-in chipset south bridge. Raid has two 150 Gb WDC drivers connected as mirror. All drivers and updates are installed( sp3 and so on). A week ago PC changed its video mode to 256 colors (like VESA mode) and after several moments I got BSOD: c000021a: 0xc0000005 Doctor watson did not create dump although it is installed as default debugger. After reboot it said that config file is missing or corrupted. So, I boot to recovery console and found that registry file (config) is so small. I've replaced it with one from recovery point and windows booted sucessfully. But after about 3 hrs -- it has crashed again in the same wat! I look in event viewer: is said that Explorer.exe failed to open \global??\DLIAFS. I look in winobj, and found that it is a device. I made "deny from everyone" for this device ACL, and after several hours my windows crashed. I restored registry, boot again and there was no error about DLIAFS. I did full chkdsk and it did not found anything bad. But I found event about error paging to \Harddrive1\D. I do not have pagefile there, but I thought I should check my disk again. Unfortunatelly I cannt use smart tools for RAID, but I downloaded latest software from Intel (it can do the same things like RAID bios can but from windows). It verified my disks, found some errors, fix them, than I rebooted. And it crashed again. I am lost. What (except kernel debugging) could be done here? Thanks

    Read the article

  • Windows XP corrupts registry every several hours

    - by Ilya Kazakevich
    There is a Dell XPS 400 with Windows Media Center installer. It is installed on RAID (Intel Matrix Storage) which is built-in chipset south bridge. Raid has two 150 Gb WDC drivers connected as mirror. All drivers and updates are installed( sp3 and so on). A week ago PC changed its video mode to 256 colors (like VESA mode) and after several moments I got BSOD: c000021a: 0xc0000005 Doctor watson did not create dump although it is installed as default debugger. After reboot it said that config file is missing or corrupted. So, I boot to recovery console and found that registry file (config) is so small. I've replaced it with one from recovery point and windows booted sucessfully. But after about 3 hrs -- it has crashed again in the same wat! I look in event viewer: is said that Explorer.exe failed to open \global??\DLIAFS. I look in winobj, and found that it is a device. I made "deny from everyone" for this device ACL, and after several hours my windows crashed. I restored registry, boot again and there was no error about DLIAFS. I did full chkdsk and it did not found anything bad. But I found event about error paging to \Harddrive1\D. I do not have pagefile there, but I thought I should check my disk again. Unfortunatelly I cannt use smart tools for RAID, but I downloaded latest software from Intel (it can do the same things like RAID bios can but from windows). It verified my disks, found some errors, fix them, than I rebooted. And it crashed again. I am lost. What (except kernel debugging) could be done here? Thanks

    Read the article

  • Error in mounting HDD

    - by Vikramjeet
    I am getting the following error whenever I mount my external HDD. It was working before and then I opted for safely removing the drive. Now its giving me following error Error mounting: mount exited with exit code 13: ntfs_mst_post_read_fixup_warn: magic: 0x43425355 size: 4096 usa_ofs: 8850 usa_count: 65535: Invalid argument Actual VCN (0x800006009000000) of index buffer is different from expected VCN (0x0). Failed to mount '/dev/sdb1': Input/output error NTFS is either inconsistent, or there is a hardware fault, or it's a SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows then reboot into Windows twice. The usage of the /f parameter is very important! If the device is a SoftRAID/FakeRAID then first activate it and mount a different device under the /dev/mapper/ directory, (e.g. /dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation for more details.

    Read the article

  • Running Ubuntu on Vaio laptops

    - by Deepak Adhikari
    I am an Ubuntu user... and willing to buy a laptop for my undergraduate study, but the brand which I am likely to buy does not fall on Ubuntu certified hardware. I am willing to buy vaio S series laptop. Can anyone answer my following questions? will Ubuntu 11.10 run smoothly with full hardware compatibility on vaio S series laptop? is there ubuntu support for vaio or vaio support for Ubuntu? googling on net found that there are some problems running Ubuntu on vaio is that true? if so will I get support from any community?

    Read the article

  • My Computer hangs for a few minutes just after startup, and then is fine.

    - by EvilChookie
    So I just built myself a reasonably beefy computer, and I installed Windows 7 on it. However, I start the machine up each morning and within a few minutes, the computer will semi hang. That is the mouse is responsive, and most of the time I can open task manager, or a new tab in Chrome. Occasionally windows will be labelled as 'Not responding'. Then, the machine will get over it's problem, and will be nice and quick until I turn it off. Here's my specs: CPU: AMD Phenom-II X4 955 Black (Quad Core, 3.2ghz) RAM: 4GB of DDR3 1300 MOBO: ASUS M4A785T-M (Latest BIOS) HARD DRIVES: 2x1TB Western Digital Caviar Blacks in RAID-0. OS: Windows 7 Ultimate x64. GPU: ASUS GT240 1GB. I believe this issue relates to the RAID array, as I didn't have the lockup problem before I created the array. I purchased a second drive and reformatted after creating a RAID array, since the single drive was a little on the pokey side (compared to the rest of the computer). What I have tried: Updated Raid Drivers Malware checks Windows Updates Unecessary Services CPU and Disk activity appears to be low (via Resource Monitor) No strange errors in the error log. Any thoughts?

    Read the article

  • Analog and digital audio output at the same time

    - by wim
    My speakers use a digital input, but my headphones use an analog input. I have them both plugged in, and when I want to use the headphones I just turn off the speakers and switch on the headphones. I know that simultaneous output on digital and analog is supported by the hardware, because it worked fine in Windows XP. But on Ubuntu, I seem to only get one at a time, depending on which setting is selected in the combo box located at System -> Preferences -> Sound -> Hardware. How can I get simultaneous analog and digital output without having to switch the profile every time? I'm on Ubuntu 11.04 and it's an HDA Intel chip.

    Read the article

  • Windows 8 x64 with VMWare Workstation or inside ESXi

    - by Dommer
    I need to run several virtual machines on a core i7-920 box with 12GB or RAM and a 256GB SSD to host the VMs. It also has a Highpoint RocketRaid 2720SGL RAID controller with a 12TB RAID 5 array. I want one of my VMs to run Windows 8 x64, to have access to the RAID array as a native disk (not as networked drives and it needs to run at full speed) and to be able to send files quickly across the network. Initially I thought I'd try to do this using ESXi 5, but I have been unable to find any working RAID drivers for the RR2720SGL and it is not on the HCL for ESXi 5. In light of this, I have installed Windows 8 x64 on the hardware and am thinking of installing VMWare Workstation and running my VMs inside there. I guess my questions are these: How does VMWare Workstation 9 perform compared to ESXi 5? In the real world I mean? Presumably installing Win 8 as the host OS will give me way better performance for that Win 8 machine than Win 8 running under ESXi? I should stick with Windows 8 x64 as the host OS, right? If I install a domain controller VM inside my Win 8 box and join the Win 8 machine to that domain, am I insane (I would guess the Win 8 machine wouldn't see the domain controller until it finished starting everything up, but I don't think that matters)?! is it feasible to give metrics like this and if so, what is the likely value of x? 25%? 50%? 75%? Win 8 under ESXi runs x% as fast as Win 8 installed bare metal.

    Read the article

  • My wireless/WiFi connection does not work. What can I do?

    - by Wild Man
    Your situation You have successfully installed Ubuntu. You have just downloaded and booted Ubuntu live media. The latest LTS (see also HWE) or latest non-LTS release are preferred. See the list of Ubuntu releases that are currently supported.) You upgraded your Ubuntu installation to the latest release that the software updater offered you. WiFi worked before, but not now on the new release. You migrated your existing Ubuntu installation to new hardware. Your problem The wireless of your laptop or dekstop is not working. You tried switching the wireless switch off and on and you tried rebooting several times, but you don't see any WiFi access points. You can see your wireless access point, but you cannot establish a connection. You want to analyze the problem, but you don't know where to start or what information you can provide. Related questions I have a hardware detection problem, what logs do I need to look into?

    Read the article

< Previous Page | 41 42 43 44 45 46 47 48 49 50 51 52  | Next Page >