Search Results

Search found 6963 results on 279 pages for 'ia 32'.

Page 45/279 | < Previous Page | 41 42 43 44 45 46 47 48 49 50 51 52  | Next Page >

• Void* array casting to float, int32, int16, etc.

  - by Griffin

  Hey guys, I've got an array of PCM data, it could be 16 bit, 24 bit packed, 32 bit, etc.. It could be signed, or unsigned, and it could be 32 or 64 bit floating point. It is currently stored as a "void**" matrix, indexed by channel, then by frame. The goal is to allow my library to take in any PCM format and buffer it, without requiring manipulation of the data to fit a designated structure. If the A/D converter spits out 24 bit packed arrays of interleaved PCM, I need to accept it gracefully. I also need to support 16 bit non interleaved, as well as any permutation of the above formats. I know the bit depth and other information at runtime, and I'm trying to code efficiently while not duplicating code. What I need is an effective way to cast the matrix, put PCM data into the matrix, and then pull it out later. I can cast the matrix to int32_t, or int16_t for the 32 and 16 bit signed PCM respectively, I'll probably have to store the 24 bit PCM in an int32_t for 32 bit, 8 bit byte systems as well. Can anyone recommend a good way to put data into this array, and pull it out later? I'd like to avoid large sections of code which look like: switch( mFormat ) { case 1: // unsigned 8 bit for( int i = 0; i < mChannels; i++ ) framesArray = (uint8_t*)pcm[i]; break; case 2: // signed 8 bit for( int i = 0; i < mChannels; i++ ) framesArray = (int8_t*)pcm[i]; break; case 3: // unsigned 16 bit ... Limitations: I'm working in C/C++, no templates, no RTTI, no STL. Think embedded. Things get trickier when I have to port this to a DSP with 16 bit bytes. Does anybody have any useful macros they might be willing to share? Thanks, -Griff

  Read the article

• How do I tell whether my IE is 64-bit? (For that matter, Java too?)

  - by user225626

  Millions of questions already on the web about how to tell whether the OS is 64-bit, but not whether IE and/or Java runtime is 64-bit. Some background: I installed 64-bit Win 7, and IE installed automatically with it from CD; I didn't download IE. I did download Java runtime. Mouseover tips in Control Panel!Programs shows it as: "Java 32-bit Java(TM) Control Panel" Then I went to http://java.com/en/download/manual.jsp and that page says... We have detected you may be viewing this page in a 32-bit browser. If you use 32-bit and 64-bit browsers interchangeably, you will need to install both 32-bit and 64-bit Java in order to have the Java plug-in for both browsers. But I cannot tell in the aftermath whether my Java is 64-bit. Evidently the "Java(TM) Control Panel" is, but I don't know if that's the same as the runtime. (I'm afraid to ask on the offical Java forums, because they're such a-holes.) Also, How do I issue a command to the OS to tell whether this IE is 64-bit? Help!About doesn't say on that. Thanks.

  Read the article

• Access array of c-structs using Python ctypes

  - by sadris

  I have a C-function that allocates memory at the address passed to and is accessed via Python. The pointer contents does contain an array of structs in the C code, but I am unable to get ctypes to access the array properly beyond the 0th element. How can I get the proper memory offset to be able to access the non-zero elements? Python's ctypes.memset is complaining about TypeErrors if I try to use their ctypes.memset function. typedef struct td_Group { unsigned int group_id; char groupname[256]; char date_created[32]; char date_modified[32]; unsigned int user_modified; unsigned int user_created; } Group; int getGroups(LIBmanager * handler, Group ** unallocatedPointer); ############# python code below: class Group(Structure): _fields_ = [("group_id", c_uint), ("groupname", c_char*256), ("date_created", c_char*32), ("date_modified", c_char*32), ("user_modified", c_uint), ("user_created", c_uint)] myGroups = c_void_p() count = libnativetest.getGroups( nativePointer, byref(myGroups) ) casted = cast( myGroups, POINTER(Group*count) ) for x in range(0,count): theGroup = cast( casted[x], POINTER(Group) ) # this only works for the first entry in the array: print "~~~~~~~~~~" + theGroup.contents.groupname Related: Access c_char_p_Array_256 in Python using ctypes

  Read the article

• Cannot open database requested by the login. The login failed. Login failed for user

  - by Cipher

  Hi, I have copied a DB from one my computers and using it here. On trying to open the page which requires the fetching content from DB, on con.open I am getting this exception: Unable to open the physical file "E:\Program Files\Microsoft SQL Server\MSSQL10.SQLEXPRESS\MSSQL\DATA\cakephp.mdf". Operating system error 32: "32(The process cannot access the file because it is being used by another process.)". Unable to open the physical file "E:\Program Files\Microsoft SQL Server\MSSQL10.SQLEXPRESS\MSSQL\DATA\cakephp_log.LDF". Operating system error 32: "32(The process cannot access the file because it is being used by another process.)". Cannot open database "cakephp" requested by the login. The login failed. Login failed for user 'Sarin-PC\Sarin'. I have attached the database from Management Studio Express 2008 and I have also checcked the connection string. Here it is: <connectionStrings> <add name="cn" connectionString="server=.\sqlexpress;database=cakephp;integrated security=true;uid=sarin;pwd=******"/> </connectionStrings> In Visual Studio, when I test the connection, it says "Test connection succeeded". However, there is one strange thing going on. When I login to the Management Studio, there is no + sign with the newly attached database, as shown. If the full WebConfig is reqiured to be seen, I have pasted it here: http://pastebin.com/sVAuN0Ug

  Read the article

• WebGL pass array shader

  - by user987058

  I'm new to WebGL and I'm facing some problems of the shaders. I wanna do multiple light sources in the scene. I searched online and knew that in WebGL, you can't pass an array into the fragment shader, so the only way is use the texture. Here is the problem I can't figure out. First, I create a 32x32 texture using the following code: var pix = []; for(var i=0;i<32;i++) { for(var j=0;j<32;j++) pix.push(0.8,0.8,0.1); } gl.activeTexture(gl.TEXTURE0); gl.bindTexture(gl.TEXTURE_2D, lightMap); gl.pixelStorei(gl.UNPACK_ALIGNMENT,1); gl.texImage2D(gl.TEXTURE_2D, 0, gl.RGB, 32,32,0, gl.RGB, gl.UNSIGNED_BYTE,new Float32Array(pix)); gl.texParameteri(gl.TEXTURE_2D, gl.TEXTURE_MAG_FILTER, gl.LINEAR); gl.texParameteri(gl.TEXTURE_2D, gl.TEXTURE_MIN_FILTER, gl.LINEAR); gl.uniform1i(g_loader.program.set_uniform["u_texture2"],0); But however, when I tried to access the texture in the shader: [Fragment Shader] varying vec2 v_texcoord; uniform sampler2D u_texture2; void main(void) { vec3 lightLoc = texture2D(u_texture, v_texcoord).rgb; gl_FragData[0] = vec4(lightLoc,1.0); } The result is totally black. Is there anyone knows how to acces or create the texture correctly?

  Read the article

• Processor, OS : 32bit, 64 bit

  - by Sandbox

  I am new to programming and come from a non-CS background (no formal degree). I mostly program winforms using C#. I am confused about 32 bit and 64 bit.... I mean, have heard about 32 bit OS, 32 bit processor and based on which a program can have maximum memory. How it affects the speed of a program. There are lot more questions which keep coming to mind. I tried to go through some Computer Organization and Architecture books. But, either I am too dumb to understand what is written in there or the writers assume that the reader has some CS background. Can someone explain me these things in a plain simple English or point me to something which does that. EDIT: I have read things like In 32-bit mode, they can access up to 4GB memory; in 64-bit mode, they can access much much more....I want to know WHY to all such things. BOUNTY: Answers below are really good....esp one by Martin. But, I am looking at a thorough explanation, but in plain simple English.

  Read the article

• Unable to enable wireless on a Vostro 2520

  - by Joe

  I have a Vostro 2520 and not sure how to enable wireless on my machine. The details are given below, would appreciate any pointers to resolving this issue. lsmod returns Module Size Used by ath9k 132390 0 ath9k_common 14053 1 ath9k ath9k_hw 411151 2 ath9k,ath9k_common ath 24067 3 ath9k,ath9k_common,ath9k_hw b43 365785 0 mac80211 506816 2 ath9k,b43 cfg80211 205544 4 ath9k,ath,b43,mac80211 bcma 26696 1 b43 ssb 52752 1 b43 ndiswrapper 282628 0 ums_realtek 18248 0 usb_storage 49198 1 ums_realtek uas 18180 0 snd_hda_codec_hdmi 32474 1 snd_hda_codec_cirrus 24002 1 joydev 17693 0 parport_pc 32866 0 ppdev 17113 0 rfcomm 47604 0 bnep 18281 2 bluetooth 180104 10 rfcomm,bnep psmouse 97362 0 dell_wmi 12681 0 sparse_keymap 13890 1 dell_wmi snd_hda_intel 33773 3 snd_hda_codec 127706 3 snd_hda_codec_hdmi,snd_hda_codec_cirrus,snd_hda_intel snd_hwdep 13668 1 snd_hda_codec snd_pcm 97188 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec snd_seq_midi 13324 0 snd_rawmidi 30748 1 snd_seq_midi snd_seq_midi_event 14899 1 snd_seq_midi snd_seq 61896 2 snd_seq_midi,snd_seq_midi_event snd_timer 29990 2 snd_pcm,snd_seq snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq wmi 19256 1 dell_wmi snd 78855 16 snd_hda_codec_hdmi,snd_hda_codec_cirrus,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device mac_hid 13253 0 i915 473240 3 drm_kms_helper 46978 1 i915 uvcvideo 72627 0 drm 242038 4 i915,drm_kms_helper videodev 98259 1 uvcvideo soundcore 15091 1 snd dell_laptop 18119 0 dcdbas 14490 1 dell_laptop i2c_algo_bit 13423 1 i915 v4l2_compat_ioctl32 17128 1 videodev snd_page_alloc 18529 2 snd_hda_intel,snd_pcm video 19596 1 i915 serio_raw 13211 0 mei 41616 0 lp 17799 0 parport 46562 3 parport_pc,ppdev,lp r8169 62099 0 sudo lshw -class network *-network UNCLAIMED description: Network controller product: Broadcom Corporation vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:07:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:f7c00000-f7c07fff *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:09:00.0 logical name: eth0 version: 07 serial: 78:45:c4:a3:aa:65 size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl8168e-3_0.0.4 03/27/12 ip=192.168.1.5 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s resources: irq:41 ioport:e000(size=256) memory:f0004000-f0004fff memory:f0000000-f0003fff rfkill list all 0: dell-wifi: Wireless LAN Soft blocked: yes Hard blocked: yes 1: dell-bluetooth: Bluetooth Soft blocked: yes Hard blocked: yes Output of lspci > 00:00.0 Host bridge: Intel Corporation Ivy Bridge DRAM Controller (rev > 09) 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge > Graphics Controller (rev 09) 00:16.0 Communication controller: Intel > Corporation Panther Point MEI Controller #1 (rev 04) 00:1a.0 USB > controller: Intel Corporation Panther Point USB Enhanced Host > Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation Panther > Point High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: > Intel Corporation Panther Point PCI Express Root Port 1 (rev c4) > 00:1c.3 PCI bridge: Intel Corporation Panther Point PCI Express Root > Port 4 (rev c4) 00:1c.5 PCI bridge: Intel Corporation Panther Point > PCI Express Root Port 6 (rev c4) 00:1d.0 USB controller: Intel > Corporation Panther Point USB Enhanced Host Controller #1 (rev 04) > 00:1f.0 ISA bridge: Intel Corporation Panther Point LPC Controller > (rev 04) 00:1f.2 SATA controller: Intel Corporation Panther Point 6 > port SATA Controller [AHCI mode] (rev 04) 00:1f.3 SMBus: Intel > Corporation Panther Point SMBus Controller (rev 04) 07:00.0 Network > controller: Broadcom Corporation Device 4365 (rev 01) 09:00.0 Ethernet > controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express > Gigabit Ethernet controller (rev 07) Output of lspci -v 0:00.0 Host bridge: Intel Corporation Ivy Bridge DRAM Controller (rev 09) Subsystem: Dell Device 0558 Flags: bus master, fast devsel, latency 0 Capabilities: <access denied> Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) (prog-if 00 [VGA controller]) Subsystem: Dell Device 0558 Flags: bus master, fast devsel, latency 0, IRQ 43 Memory at f7800000 (64-bit, non-prefetchable) [size=4M] Memory at e0000000 (64-bit, prefetchable) [size=256M] I/O ports at f000 [size=64] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: i915 Kernel modules: i915 00:16.0 Communication controller: Intel Corporation Panther Point MEI Controller #1 (rev 04) Subsystem: Dell Device 0558 Flags: bus master, fast devsel, latency 0, IRQ 42 Memory at f7d0a000 (64-bit, non-prefetchable) [size=16] Capabilities: <access denied> Kernel driver in use: mei Kernel modules: mei 00:1a.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #2 (rev 04) (prog-if 20 [EHCI]) Subsystem: Dell Device 0558 Flags: bus master, medium devsel, latency 0, IRQ 16 Memory at f7d08000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1b.0 Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04) Subsystem: Dell Device 0558 Flags: bus master, fast devsel, latency 0, IRQ 44 Memory at f7d00000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 1 (rev c4) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.3 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 4 (rev c4) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=07, subordinate=07, sec-latency=0 Memory behind bridge: f7c00000-f7cfffff Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.5 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 6 (rev c4) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=09, subordinate=09, sec-latency=0 I/O behind bridge: 0000e000-0000efff Prefetchable memory behind bridge: 00000000f0000000-00000000f00fffff Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #1 (rev 04) (prog-if 20 [EHCI]) Subsystem: Dell Device 0558 Flags: bus master, medium devsel, latency 0, IRQ 23 Memory at f7d07000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1f.0 ISA bridge: Intel Corporation Panther Point LPC Controller (rev 04) Subsystem: Dell Device 0558 Flags: bus master, medium devsel, latency 0 Capabilities: <access denied> Kernel modules: iTCO_wdt 00:1f.2 SATA controller: Intel Corporation Panther Point 6 port SATA Controller [AHCI mode] (rev 04) (prog-if 01 [AHCI 1.0]) Subsystem: Dell Device 0558 Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 40 I/O ports at f0b0 [size=8] I/O ports at f0a0 [size=4] I/O ports at f090 [size=8] I/O ports at f080 [size=4] I/O ports at f060 [size=32] Memory at f7d06000 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: ahci 00:1f.3 SMBus: Intel Corporation Panther Point SMBus Controller (rev 04) Subsystem: Dell Device 0558 Flags: medium devsel, IRQ 11 Memory at f7d05000 (64-bit, non-prefetchable) [size=256] I/O ports at f040 [size=32] Kernel modules: i2c-i801 07:00.0 Network controller: Broadcom Corporation Device 4365 (rev 01) Subsystem: Dell Device 0016 Flags: bus master, fast devsel, latency 0, IRQ 10 Memory at f7c00000 (64-bit, non-prefetchable) [size=32K] Capabilities: <access denied> 09:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 07) Subsystem: Dell Device 0558 Flags: bus master, fast devsel, latency 0, IRQ 41 I/O ports at e000 [size=256] Memory at f0004000 (64-bit, prefetchable) [size=4K] Memory at f0000000 (64-bit, prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: r8169 Kernel modules: r8169

  Read the article

• How can I remove old kernels/install new ones when /boot is full?

  - by Marcel

  I know this question is asked many times before, however with me it is just a bit different I guess. # df -h Filesystem Size Used Avail Use% Mounted on /dev/sda3 224G 5.2G 208G 3% / udev 1.9G 4.0K 1.9G 1% /dev tmpfs 777M 260K 777M 1% /run none 5.0M 0 5.0M 0% /run/lock none 1.9G 0 1.9G 0% /run/shm /dev/sda2 90M 88M 0 100% /boot /dev/sda6 1.9G 514M 1.3G 29% /tmp My boot partition is full. Current Kernel: # uname -r 3.2.0-35-generic All Kernels: # dpkg --list | grep linux-image ii linux-image-3.2.0-32-generic 3.2.0-32.51 Linux kernel image for version 3.2.0 on 64 bit x86 SMP ii linux-image-3.2.0-34-generic 3.2.0-34.53 Linux kernel image for version 3.2.0 on 64 bit x86 SMP ii linux-image-3.2.0-35-generic 3.2.0-35.55 Linux kernel image for version 3.2.0 on 64 bit x86 SMP iF linux-image-3.2.0-37-generic 3.2.0-37.58 Linux kernel image for version 3.2.0 on 64 bit x86 SMP iF linux-image-3.2.0-38-generic 3.2.0-38.60 Linux kernel image for version 3.2.0 on 64 bit x86 SMP iU linux-image-generic 3.2.0.37.45 Generic Linux kernel image So I thought of removing the 3.2.0.32-generic kernel with: # sudo apt-get purge linux-image-3.2.0-32-generic Reading package lists... Done Building dependency tree Reading state information... Done You might want to run 'apt-get -f install' to correct these: The following packages have unmet dependencies: linux-generic : Depends: linux-headers-generic (= 3.2.0.37.45) but 3.2.0.38.46 is to be installed E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution). No success. When I try apt-get -f install it also fails: # apt-get -f install Reading package lists... Done Building dependency tree Reading state information... Done Correcting dependencies... Done The following packages were automatically installed and are no longer required: linux-headers-3.2.0-34 linux-headers-3.2.0-35 linux-headers-3.2.0-34-generic linux-headers-3.2.0-35-generic Use 'apt-get autoremove' to remove them. The following extra packages will be installed: linux-generic linux-image-generic The following packages will be upgraded: linux-generic linux-image-generic 2 upgraded, 0 newly installed, 0 to remove and 9 not upgraded. 5 not fully installed or removed. Need to get 0 B/4,334 B of archives. After this operation, 0 B of additional disk space will be used. Do you want to continue [Y/n]? y Setting up initramfs-tools (0.99ubuntu13.1) ... update-initramfs: deferring update (trigger activated) Setting up linux-image-3.2.0-37-generic (3.2.0-37.58) ... Running depmod. update-initramfs: deferring update (hook will be called later) The link /initrd.img is a dangling linkto /boot/initrd.img-3.2.0-38-generic Examining /etc/kernel/postinst.d. run-parts: executing /etc/kernel/postinst.d/initramfs-tools 3.2.0-37-generic /boot/vmlinuz-3.2.0-37-generic update-initramfs: Generating /boot/initrd.img-3.2.0-37-generic gzip: stdout: No space left on device E: mkinitramfs failure cpio 141 gzip 1 update-initramfs: failed for /boot/initrd.img-3.2.0-37-generic with 1. run-parts: /etc/kernel/postinst.d/initramfs-tools exited with return code 1 Failed to process /etc/kernel/postinst.d at /var/lib/dpkg/info/linux-image-3.2.0-37-generic.postinst line 1010. dpkg: error processing linux-image-3.2.0-37-generic (--configure): subprocess installed post-installation script returned error exit status 2 Setting up linux-image-3.2.0-38-generic (3.2.0-38.60) ... Running depmod. update-initramfs: deferring update (hook will be called later) The link /initrd.img is a dangling linkto /boot/initrd.img-3.2.0-37-generic Examining /etc/kernel/postinst.d. run-parts: executing /etc/kernel/postinst.d/initramfs-tools 3.2.0-38-generic /boot/vmlinuz-3.2.0-38-generic update-initramfs: Generating /boot/initrd.img-3.2.0-38-generic gzip: stdout: No space left on device E: mkinitramfs failure cpio 141 gzip 1 update-initramfs: failed for /boot/initrd.img-3.2.0-38-generic with 1. run-parts: /etc/kernel/postinst.d/initramfs-tools exited with return code 1 Failed to process /etc/kernel/postinst.d at /var/lib/dpkg/info/linux-image-3.2.0-38-generic.postinst line 1010. dpkg: error processing linux-image-3.2.0-38-generic (--configure): subprocess installed post-installation script returned error exit status 2 dpkg: dependency problems prevent configuration of linux-image-generic: linux-image-generic depends on linux-image-3.2.0-37-generic; however: Package linux-image-3.2.0-37-generic is not configured yet. dpkg: error processing linux-image-generic (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of linux-generic: linux-generic depends on linux-image-generic (= 3.2.0.37.45); however: Package linux-image-generic is not configured yet. linux-generic depends on linux-headers-generic (= 3.2.0.37.45); however: Version of linux-headers-generic on system is 3.2.0.38.46. dpkg: error processing linux-generic (--configure): dependency problems - leaving unconfigured Processing triggers for initramfs-tools ... No apport report written because the error message indicates its a followup error from a previous failure. No apport report written because MaxReports is reached already update-initramfs: Generating /boot/initrd.img-3.2.0-35-generic gzip: stdout: No space left on device E: mkinitramfs failure cpio 141 gzip 1 update-initramfs: failed for /boot/initrd.img-3.2.0-35-generic with 1. dpkg: error processing initramfs-tools (--configure): subprocess installed post-installation script returned error exit status 1 No apport report written because MaxReports is reached already Errors were encountered while processing: linux-image-3.2.0-37-generic linux-image-3.2.0-38-generic linux-image-generic linux-generic initramfs-tools E: Sub-process /usr/bin/dpkg returned an error code (1) Any help would really be appreciated. Update: I did: sudo rm /boot/*-3.2.0-32-generic /boot/*-3.2.0-34-generic After that the following problem with apt-get -f install: root@localhost:/# apt-get -f install Reading package lists... Done Building dependency tree Reading state information... Done Correcting dependencies... Done The following extra packages will be installed: linux-generic The following packages will be upgraded: linux-generic 1 upgraded, 0 newly installed, 0 to remove and 9 not upgraded. 1 not fully installed or removed. Need to get 0 B/1,722 B of archives. After this operation, 0 B of additional disk space will be used. Do you want to continue [Y/n]? y dpkg: dependency problems prevent configuration of linux-generic: linux-generic depends on linux-image-generic (= 3.2.0.37.45); however: Version of linux-image-generic on system is 3.2.0.38.46. linux-generic depends on linux-headers-generic (= 3.2.0.37.45); however: Version of linux-headers-generic on system is 3.2.0.38.46. dpkg: error processing linux-generic (--configure): dependency problems - leaving unconfigured No apport report written because the error message indicates its a followup error from a previous failure. Errors were encountered while processing: linux-generic E: Sub-process /usr/bin/dpkg returned an error code (1)

  Read the article

• Microphone not capturing sound on 12.04 Lenovo G580

  - by Yam Marcovic

  In both Skype and the Sound Recorder application, I am not capturing any audio from my built-in microphone. I'm not sure why. Otherwise, sound output is working well. I have tried running gstreamer-properties and setting the Default Input plugin to PulseAUdio as well (to match the output), and it didn't help. I have tried running alsamixer -V all and I only get 2 input-related entries: Capture(L R) which is on 100 and not muted (can't be either), and Analog Mic Boost which is on 20db. Extra info: Camera (video) is working well on Skype and Kamerka. Can you please help me get my microphone to work? lspci: 00:00.0 Host bridge: Intel Corporation Ivy Bridge DRAM Controller (rev 09) Subsystem: Lenovo Device 3977 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) (prog-if 00 [VGA controller]) Subsystem: Lenovo Device 3977 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 42 Region 0: Memory at e0000000 (64-bit, non-prefetchable) [size=4M] Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at 3000 [size=64] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: i915 Kernel modules: i915 00:14.0 USB controller: Intel Corporation Panther Point USB xHCI Host Controller (rev 04) (prog-if 30 [XHCI]) Subsystem: Lenovo Device 3977 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 41 Region 0: Memory at e0600000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: xhci_hcd 00:16.0 Communication controller: Intel Corporation Panther Point MEI Controller #1 (rev 04) Subsystem: Lenovo Device 3977 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 43 Region 0: Memory at e0614000 (64-bit, non-prefetchable) [size=16] Capabilities: <access denied> Kernel driver in use: mei Kernel modules: mei 00:1a.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #2 (rev 04) (prog-if 20 [EHCI]) Subsystem: Lenovo Device 3977 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at e0619000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1b.0 Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04) Subsystem: Lenovo Device 3977 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 44 Region 0: Memory at e0610000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 1 (rev c4) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: e0500000-e05fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.1 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 2 (rev c4) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 Memory behind bridge: e0400000-e04fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #1 (rev 04) (prog-if 20 [EHCI]) Subsystem: Lenovo Device 3977 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at e0618000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1f.0 ISA bridge: Intel Corporation Panther Point LPC Controller (rev 04) Subsystem: Lenovo Device 3977 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel modules: iTCO_wdt 00:1f.2 SATA controller: Intel Corporation Panther Point 6 port SATA Controller [AHCI mode] (rev 04) (prog-if 01 [AHCI 1.0]) Subsystem: Lenovo Device 3977 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 40 Region 0: I/O ports at 3088 [size=8] Region 1: I/O ports at 3094 [size=4] Region 2: I/O ports at 3080 [size=8] Region 3: I/O ports at 3090 [size=4] Region 4: I/O ports at 3060 [size=32] Region 5: Memory at e0617000 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: ahci 00:1f.3 SMBus: Intel Corporation Panther Point SMBus Controller (rev 04) Subsystem: Lenovo Device 3977 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 10 Region 0: Memory at e0615000 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at 3040 [size=32] Kernel modules: i2c-i801 01:00.0 Ethernet controller: Atheros Communications Inc. AR8162 Fast Ethernet (rev 08) Subsystem: Lenovo Device 3979 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 11 Region 0: Memory at e0500000 (64-bit, non-prefetchable) [size=256K] Region 2: I/O ports at 2000 [size=128] Capabilities: <access denied> 02:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) Subsystem: Lenovo Device 31a1 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 17 Region 0: Memory at e0400000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: ath9k Kernel modules: ath9k aplay -l **** List of PLAYBACK Hardware Devices **** card 0: PCH [HDA Intel PCH], device 0: CONEXANT Analog [CONEXANT Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0

  Read the article

• Network outside internal not reaching TMG Forefront 2010 (Hyper-V environment)

  - by Pascal

  Below is my environment: I have 1 physical machine running Windows 2008 R2, with the Hyper-V role. This machine has 3 physical NICs: One for Internet One for Internal Network One for Wireless Network All 3 have their respective Virtual Networks in Hyper-V, and I have an extra Private virutal machine network for a DMZ Network. In one of the virtual machines, I have TMG Forefront 2010 SP1 installed, with all 4 networks available to it. Below is the IPCONFIG /ALL at the firewall: Windows IP Configuration Host Name . . . . . . . . . . . . : FRW-EXP1-02 Primary Dns Suffix . . . . . . . : exp1.eti.br Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : Yes WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : exp1.eti.br Ethernet adapter Internet: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Microsoft Virtual Machine Bus Network Adapter #4 Physical Address. . . . . . . . . : 00-15-5D-01-06-0E DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::6d05:6033:4cfc:bdf5%15(Preferred) IPv4 Address. . . . . . . . . . . : 189.100.110.xxx(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.240.0 Lease Obtained. . . . . . . . . . : quarta-feira, 5 de janeiro de 2011 11:17:24 Lease Expires . . . . . . . . . . : quarta-feira, 5 de janeiro de 2011 16:07:02 Default Gateway . . . . . . . . . : 189.100.96.xxx DHCP Server . . . . . . . . . . . : 201.6.2.43 DHCPv6 IAID . . . . . . . . . . . : 436213085 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-14-6D-75-6F-00-15-5D-01-06-0B DNS Servers . . . . . . . . . . . : 201.6.2.163 201.6.2.43 NetBIOS over Tcpip. . . . . . . . : Enabled Ethernet adapter Rede Interna: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Microsoft Virtual Machine Bus Network Adapter #3 Physical Address. . . . . . . . . : 00-15-5D-01-06-0C DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::51ff:4723:ce4c:bbc3%14(Preferred) IPv4 Address. . . . . . . . . . . : 10.50.75.10(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : DHCPv6 IAID . . . . . . . . . . . : 352327005 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-14-6D-75-6F-00-15-5D-01-06-0B DNS Servers . . . . . . . . . . . : 10.50.75.1 10.50.75.2 NetBIOS over Tcpip. . . . . . . . : Enabled Ethernet adapter DMZ: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Microsoft Virtual Machine Bus Network Adapter #2 Physical Address. . . . . . . . . : 00-15-5D-01-06-0A DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::d4c5:75cf:e9aa:73e1%13(Preferred) IPv4 Address. . . . . . . . . . . : 192.168.10.1(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : DHCPv6 IAID . . . . . . . . . . . : 301995357 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-14-6D-75-6F-00-15-5D-01-06-0B DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1 fec0:0:0:ffff::2%1 fec0:0:0:ffff::3%1 NetBIOS over Tcpip. . . . . . . . : Enabled Ethernet adapter Wireless: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Microsoft Virtual Machine Bus Network Adapter Physical Address. . . . . . . . . : 00-15-5D-01-06-0B DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::459:8ca6:d02:8da1%11(Preferred) IPv4 Address. . . . . . . . . . . : 192.168.1.10(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : DHCPv6 IAID . . . . . . . . . . . : 234886493 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-14-6D-75-6F-00-15-5D-01-06-0B DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1 fec0:0:0:ffff::2%1 fec0:0:0:ffff::3%1 NetBIOS over Tcpip. . . . . . . . : Enabled I have the Networks below at Forefront: External: IP addresses external to the Forefront TMG Networks Internal: 10.50.75.0 - 10.50.75.255 Local Host: Perimiter: 192.168.10.0 - 192.168.10.255 Wireless: 192.168.1.0 - 192.168.1.255 In the Networks Rules, I have: 1 => Route => Local Host => All Networks 2 => Route => Quarantined; VPN => Internal 3 => NAT => Internal; VPN => Perimiter 4 => NAT => Internal; Perimiter; Quarantined; VPN; Wireless => External My problem is that I can only communicate with the Internal and External networks. If a ping www.google.com or 10.50.75.21 from the Forefront VM, I get answer backs without a problem. If I try to ping a machine at the Perimiter network or the Wireless network, it doesn't get routed back to Forefront, and it's the default gateway on all Networks. Here as ping samples: PS C:\Users\Administrator.TPB1> ping www.google.com Pinging www.l.google.com [64.233.163.104] with 32 bytes of data: Reply from 64.233.163.104: bytes=32 time=11ms TTL=58 Reply from 64.233.163.104: bytes=32 time=8ms TTL=58 Ping statistics for 64.233.163.104: Packets: Sent = 2, Received = 2, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 8ms, Maximum = 11ms, Average = 9ms Control-C PS C:\Users\Administrator.TPB1> ping 10.50.75.21 Pinging 10.50.75.21 with 32 bytes of data: Reply from 10.50.75.21: bytes=32 time=1ms TTL=128 Reply from 10.50.75.21: bytes=32 time=1ms TTL=128 Reply from 10.50.75.21: bytes=32 time=1ms TTL=128 Reply from 10.50.75.21: bytes=32 time=1ms TTL=128 Ping statistics for 10.50.75.21: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 1ms, Maximum = 1ms, Average = 1ms PS C:\Users\Administrator.TPB1> ping 192.168.10.3 Pinging 192.168.10.3 with 32 bytes of data: Reply from 192.168.10.1: Destination host unreachable. Request timed out. Request timed out. Request timed out. Ping statistics for 192.168.10.3: Packets: Sent = 4, Received = 1, Lost = 3 (75% loss), PS C:\Users\Administrator.TPB1> The ping to the 192.168.10.3 gets the Destination host unreachable. Below is the ipconfig for the perimiter VM: PS C:\Users\Administrator.Administrator> ipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : app-exp1-02 Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Unkown IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Microsoft Virtual Machine Bus Network Adapter Physical Address. . . . . . . . . : 00-15-5D-01-06-08 DHCP Enabled. . . . . . . . . . . : No IPv4 Address. . . . . . . . . . . : 192.168.10.3 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.10.1 DNS Servers . . . . . . . . . . . : 201.6.2.163 201.6.2.43 Trying to ping 192.168.10.1 ( the gateway ) from the DMZ machine also does not work. When I use Log & Reports to monitor packets from Wireless network and Perimiter network, I don't get any packets link PING or HTTP that I try to send. But I do get a lot of spoofing messages for NETBIOS broadcasts... it's like Forefront thinks it's coming from a different network, but I don't know why. Please Help! Tks

  Read the article

• User Input That Involves A ' ' Causes A Substring Out Of Range Error

  - by Greenhouse Gases

  Hi Stackoverflow people. You have already helped me quite a bit but near the end of writing this program I have somewhat of a bug. You see in order to read in city names with a space in from a text file I use a '/' that is then replaced by the program for a ' ' (and when the serializer runs the opposite happens for next time the program is run). The problem is when a user inputs a name too add, search for, or delete that contains a space, for instance 'New York' I get a Debug Assertion Error with a substring out of range expression. I have a feeling it's to do with my correctCase function, or setElementsNull that looks at the string until it experiences a null element in the array, however ' ' is not null so I'm not sure how to fix this and I'm going a bit insane. Any help would be much appreciated. Here is my code: // U08221.cpp : main project file. #include "stdafx.h" #include <_iostream> #include <_string> #include <_fstream> #include <_cmath> using namespace std; class locationNode { public: string nodeCityName; double nodeLati; double nodeLongi; locationNode* Next; locationNode(string nameOf, double lat, double lon) { this->nodeCityName = nameOf; this->nodeLati = lat; this->nodeLongi = lon; this->Next = NULL; } locationNode() // NULL constructor { } void swapProps(locationNode *node2) { locationNode place; place.nodeCityName = this->nodeCityName; place.nodeLati = this->nodeLati; place.nodeLongi = this->nodeLongi; this->nodeCityName = node2->nodeCityName; this->nodeLati = node2->nodeLati; this->nodeLongi = node2->nodeLongi; node2->nodeCityName = place.nodeCityName; node2->nodeLati = place.nodeLati; node2->nodeLongi = place.nodeLongi; } void modify(string name) { this->nodeCityName = name; } void modify(double latlon, int mod) { switch(mod) { case 2: this->nodeLati = latlon; break; case 3: this->nodeLongi = latlon; break; } } void correctCase() // Correct upper and lower case letters of input { int MAX_SIZE = 35; int firstLetVal = this->nodeCityName[0], letVal; int n = 1; // variable for name index from second letter onwards if((this->nodeCityName[0] >90) && (this->nodeCityName[0] < 123)) // First letter is lower case { firstLetVal = firstLetVal - 32; // Capitalise first letter this->nodeCityName[0] = firstLetVal; } while(this->nodeCityName[n] != NULL) { if((this->nodeCityName[n] >= 65) && (this->nodeCityName[n] <= 90)) { if(this->nodeCityName[n - 1] != 32) { letVal = this->nodeCityName[n] + 32; this->nodeCityName[n] = letVal; } } n++; } } }; Here is the main part of the program: // U08221.cpp : main project file. #include "stdafx.h" #include "Locations2.h" #include <_iostream> #include <_string> #include <_fstream> #include <_cmath> using namespace std; #define pi 3.14159265358979323846264338327950288 #define radius 6371 #define gig 1073741824 //size of a gigabyte in bytes int n = 0,x, locationCount = 0, MAX_SIZE = 35 , g = 0, i = 0, modKey = 0, xx; string cityNameInput, alter; char targetCity[35], skipKey = ' '; double lat1, lon1, lat2, lon2, dist, dummy, modVal, result; bool acceptedInput = false, match = false, nodeExists = false;// note: addLocation(), set to true to enable user input as opposed to txt file locationNode *temp, *temp2, *example, *seek, *bridge, *start_ptr = NULL; class Menu { int junction; public: /* Convert decimal degrees to radians */ public: void setElementsNull(char cityParam[]) { int y=0; while(cityParam[y] != NULL) { y++; } while(y < MAX_SIZE) { cityParam[y] = NULL; y++; } } void correctCase(string name) // Correct upper and lower case letters of input { int MAX_SIZE = 35; int firstLetVal = name[0], letVal; int n = 1; // variable for name index from second letter onwards if((name[0] >90) && (name[0] < 123)) // First letter is lower case { firstLetVal = firstLetVal - 32; // Capitalise first letter name[0] = firstLetVal; } while(name[n] != NULL) { if((name[n] >= 65) && (name[n] <= 90)) { letVal = name[n] + 32; name[n] = letVal; } n++; } for(n = 0; targetCity[n] != NULL; n++) { targetCity[n] = name[n]; } } bool nodeExistTest(char targetCity[]) // see if entry is present in the database { match = false; seek = start_ptr; int letters = 0, letters2 = 0, x = 0, y = 0; while(targetCity[y] != NULL) { letters2++; y++; } while(x <= locationCount) // locationCount is number of entries currently in list { y=0, letters = 0; while(seek->nodeCityName[y] != NULL) // count letters in the current name { letters++; y++; } if(letters == letters2) // same amount of letters in the name { y = 0; while(y <= letters) // compare each letter against one another { if(targetCity[y] == seek->nodeCityName[y]) { match = true; y++; } else { match = false; y = letters + 1; // no match, terminate comparison } } } if(match) { x = locationCount + 1; //found match so terminate loop } else{ if(seek->Next != NULL) { bridge = seek; seek = seek->Next; x++; } else { x = locationCount + 1; // end of list so terminate loop } } } return match; } double deg2rad(double deg) { return (deg * pi / 180); } /* Convert radians to decimal degrees */ double rad2deg(double rad) { return (rad * 180 / pi); } /* Do the calculation */ double distance(double lat1, double lon1, double lat2, double lon2, double dist) { dist = sin(deg2rad(lat1)) * sin(deg2rad(lat2)) + cos(deg2rad(lat1)) * cos(deg2rad(lat2)) * cos(deg2rad(lon1 - lon2)); dist = acos(dist); dist = rad2deg(dist); dist = (radius * pi * dist) / 180; return dist; } void serialise() { // Serialize to format that can be written to text file fstream outfile; outfile.open("locations.txt",ios::out); temp = start_ptr; do { for(xx = 0; temp->nodeCityName[xx] != NULL; xx++) { if(temp->nodeCityName[xx] == 32) { temp->nodeCityName[xx] = 47; } } outfile << endl << temp->nodeCityName<< " "; outfile<<temp->nodeLati<< " "; outfile<<temp->nodeLongi; temp = temp->Next; }while(temp != NULL); outfile.close(); } void sortList() // do this { int changes = 1; locationNode *node1, *node2; while(changes > 0) // while changes are still being made to the list execute { node1 = start_ptr; node2 = node1->Next; changes = 0; do { xx = 1; if(node1->nodeCityName[0] > node2->nodeCityName[0]) //compare first letter of name with next in list { node1->swapProps(node2); // should come after the next in the list changes++; } else if(node1->nodeCityName[0] == node2->nodeCityName[0]) // if same first letter { while(node1->nodeCityName[xx] == node2->nodeCityName[xx]) // check next letter of name { if((node1->nodeCityName[xx + 1] != NULL) && (node2->nodeCityName[xx + 1] != NULL)) // check next letter until not the same { xx++; } else break; } if(node1->nodeCityName[xx] > node2->nodeCityName[xx]) { node1->swapProps(node2); // should come after the next in the list changes++; } } node1 = node2; node2 = node2->Next; // move to next pair in list } while(node2 != NULL); } } void initialise() { cout << "Populating List..."; ifstream inputFile; inputFile.open ("locations.txt", ios::in); char inputName[35] = " "; double inputLati = 0, inputLongi = 0; //temp = new locationNode(inputName, inputLati, inputLongi); do { inputFile.get(inputName, 35, ' '); inputFile >> inputLati; inputFile >> inputLongi; if(inputName[0] == 10 || 13) //remove linefeed from input { for(int i = 0; inputName[i] != NULL; i++) { inputName[i] = inputName[i + 1]; } } for(xx = 0; inputName[xx] != NULL; xx++) { if(inputName[xx] == 47) // if it is a '/' { inputName[xx] = 32; // replace it for a space } } temp = new locationNode(inputName, inputLati, inputLongi); if(start_ptr == NULL){ // if list is currently empty, start_ptr will point to this node start_ptr = temp; } else { temp2 = start_ptr; // We know this is not NULL - list not empty! while (temp2->Next != NULL) { temp2 = temp2->Next; // Move to next link in chain until reach end of list } temp2->Next = temp; } ++locationCount; // increment counter for number of records in list } while(!inputFile.eof()); cout << "Successful!" << endl << "List contains: " << locationCount << " entries" << endl; inputFile.close(); cout << endl << "*******************************************************************" << endl << "DISTANCE CALCULATOR v2.0\tAuthors: Darius Hodaei, Joe Clifton" << endl; } void menuInput() { char menuChoice = ' '; while(menuChoice != 'Q') { // Menu if(skipKey != 'X') // This is set by case 'S' below if a searched term does not exist but wants to be added { cout << endl << "*******************************************************************" << endl; cout << "Please enter a choice for the menu..." << endl << endl; cout << "(P) To print out the list" << endl << "(O) To order the list alphabetically" << endl << "(A) To add a location" << endl << "(D) To delete a record" << endl << "(C) To calculate distance between two points" << endl << "(S) To search for a location in the list" << endl << "(M) To check memory usage" << endl << "(U) To update a record" << endl << "(Q) To quit" << endl; cout << endl << "*******************************************************************" << endl; cin >> menuChoice; if(menuChoice >= 97) { menuChoice = menuChoice - 32; // Turn the lower case letter into an upper case letter } } skipKey = ' '; //Reset skipKey so that it does not skip the menu switch(menuChoice) { case 'P': temp = start_ptr; // set temp to the start of the list do { if (temp == NULL) { cout << "You have reached the end of the database" << endl; } else { // Display details for what temp points to at that stage cout << "Location : " << temp->nodeCityName << endl; cout << "Latitude : " << temp->nodeLati << endl; cout << "Longitude : " << temp->nodeLongi << endl; cout << endl; // Move on to next locationNode if one exists temp = temp->Next; } } while (temp != NULL); break; case 'O': { sortList(); // pass by reference??? cout << "List reordered alphabetically" << endl; } break; case 'A': char cityName[35]; double lati, longi; cout << endl << "Enter the name of the location: "; cin >> cityName; for(xx = 0; cityName[xx] != NULL; xx++) { if(cityName[xx] == 47) // if it is a '/' { cityName[xx] = 32; // replace it for a space } } if(!nodeExistTest(cityName)) { cout << endl << "Please enter the latitude value for this location: "; cin >> lati; cout << endl << "Please enter the longitude value for this location: "; cin >> longi; cout << endl; temp = new locationNode(cityName, lati, longi); temp->correctCase(); //start_ptr allignment if(start_ptr == NULL){ // if list is currently empty, start_ptr will point to this node start_ptr = temp; } else { temp2 = start_ptr; // We know this is not NULL - list not empty! while (temp2->Next != NULL) { temp2 = temp2->Next; // Move to next link in chain until reach end of list } temp2->Next = temp; } ++locationCount; // increment counter for number of records in list cout << "Location sucessfully added to the database! There are " << locationCount << " location(s) stored" << endl; } else { cout << "Node is already present in the list and so cannot be added again" << endl; } break; case 'D': { junction = 0; locationNode *place; cout << "Enter the name of the city you wish to remove" << endl; cin >> targetCity; setElementsNull(targetCity); correctCase(targetCity); for(xx = 0; targetCity[xx] != NULL; xx++) { if(targetCity[xx] == 47) { targetCity[xx] = 32; } } if(nodeExistTest(targetCity)) //if this node does exist { if(seek == start_ptr) // if it is the first in the list { junction = 1; } if(seek->Next == NULL) // if it is last in the list { junction = 2; } switch(junction) // will alter list accordingly dependant on where the searched for link is { case 1: start_ptr = start_ptr->Next; delete seek; --locationCount; break; case 2: place = seek; seek = bridge; seek->Next = NULL; delete place; --locationCount; break; default: bridge->Next = seek->Next; delete seek; --locationCount; break; } cout << endl << "Link deleted. There are now " << locationCount << " locations." << endl; } else { cout << "That entry does not currently exist" << endl << endl << endl; } } break; case 'C': { char city1[35], city2[35]; cout << "Enter the first city name" << endl; cin >> city1; setElementsNull(city1); correctCase(targetCity); if(nodeExistTest(city1)) { lat1 = seek->nodeLati; lon1 = seek->nodeLongi; cout << "Lati = " << seek->nodeLati << endl << "Longi = " << seek->nodeLongi << endl << endl; } cout << "Enter the second city name" << endl; cin >> city2; setElementsNull(city2); correctCase(targetCity); if(nodeExistTest(city2)) { lat2 = seek->nodeLati; lon2 = seek->nodeLongi; cout << "Lati = " << seek->nodeLati << endl << "Longi = " << seek->nodeLongi << endl << endl; } result = distance (lat1, lon1, lat2, lon2, dist); cout << "The distance between these two locations is " << result << " kilometres." << endl; } break; case 'S': { char choice; cout << "Enter search term..." << endl; cin >> targetCity; setElementsNull(targetCity); correctCase(targetCity); if(nodeExistTest(targetCity)) { cout << "Latitude: " << seek->nodeLati << endl << "Longitude: " << seek->nodeLongi << endl; } else { cout << "Sorry, that city is not currently present in the list." << endl << "Would you like to add this city now Y/N?" << endl; cin >> choice; /*while(choice != ('Y' || 'N')) { cout << "Please enter a valid choice..." << endl; cin >> choice; }*/ switch(choice) { case 'Y': skipKey = 'X'; menuChoice = 'A'; break; case 'N': break; default : cout << "Invalid choice" << endl; break; } } break; } case 'M': { cout << "Locations currently stored: " << locationCount << endl << "Memory used for this: " << (sizeof(start_ptr) * locationCount) << " bytes" << endl << endl << "You can store " << ((gig - (sizeof(start_ptr) * locationCount)) / sizeof(start_ptr)) << " more locations" << endl ; break; } case 'U': { cout << "Enter the name of the Location you would like to update: "; cin >> targetCity; setElementsNull(targetCity); correctCase(targetCity); if(nodeExistTest(targetCity)) { cout << "Select (1) to alter City Name, (2) to alter Longitude, (3) to alter Latitude" << endl; cin >> modKey; switch(modKey) { case 1: cout << "Enter the new name: "; cin >> alter; cout << endl; seek->modify(alter); break; case 2: cout << "Enter the new latitude: "; cin >> modVal; cout << endl; seek->modify(modVal, modKey); break; case 3: cout << "Enter the new longitude: "; cin >> modVal; cout << endl; seek->modify(modVal, modKey); break; default: break; } } else cout << "Location not found" << endl; break; } } } } }; int main(array<System::String ^> ^args) { Menu mm; //mm.initialise(); mm.menuInput(); mm.serialise(); }

  Read the article

• CentOS 5.5 : Postfix, Dovecot & MySQL

  - by GruffTech

  I'm hoping someone has seen this issue before because I'm at quite a loss. We're building a new outbound smtp server for our clients that features anti-spam scanning and virus scanning for outbound emails, something we had not previously done. So with CentOS 5.5 x64, Installed and patched completely. Postfix & Dovecot both installed via base repo. [grufftech@outgoing postfix]# rpm -qa | grep postfix postfix-2.3.3-2.1.el5_2 [grufftech@outgoing postfix]# rpm -qa | grep dovecot dovecot-1.0.7-7.el5 [grufftech@outgoing ~]# dovecot --build-options Build options: ioloop=poll notify=inotify ipv6 openssl SQL drivers: mysql postgresql Passdb: checkpassword ldap pam passwd passwd-file shadow sql Userdb: checkpassword ldap passwd prefetch passwd-file sql static /etc/dovecot.conf auth default { mechanisms = plain login digest-md5 cram-md5 passdb sql { args = /etc/dovecot-mysql.conf } userdb sql { args = /etc/dovecot-mysql.conf } userdb prefetch { } user = nobody socket listen { master { path = /var/run/dovecot/auth-master mode = 0660 user = postfix group = postfix } client { path = /var/spool/postfix/private/auth mode = 0660 user = postfix group = postfix } } } All the server is doing is auth for postfix, so no reason to have imap / pop / dict. /etc/dovecot-mysql.conf driver = mysql connect = host=10.0.32.159 dbname=mail user=****** password=******** default_pass_scheme = plain user_query = select 1 password_query = select password from users where username = '%n' and domain = '%d' So drop in my configuration, (which is working on another server identical to this one.) [grufftech@outgoing ~]# /etc/init.d/dovecot start Starting Dovecot Imap: [ OK ] Sweet. Booted up nicely, thats good.... (incoming problem in 3....2....1....) May 21 08:09:01 outgoing dovecot: Dovecot v1.0.7 starting up May 21 08:09:02 outgoing dovecot: auth-worker(default): mysql: Connect failed to 10.0.32.159 (mail): Can't connect to MySQL server on '10.0.32.159' (13) - waiting for 1 seconds before retry well what the crap. went and checked permissions on my MySQL database, and its fine. [grufftech@outgoing ~]# mysql vpopmail -h 10.0.32.159 -u ****** -p Enter password: Welcome to the MySQL monitor. Commands end with ; or \g. Your MySQL connection id is 127828558 Server version: 4.1.22 Type 'help;' or '\h' for help. Type '\c' to clear the buffer. mysql>\q So! My server can talk to my database server. but dovecot, for whatever reason, isn't able to. I've fiddled with it for the last six hours, grabbed slightly-older copies of the RPM (ones that matched our production server exactly) to test those, copied configs, searched google, searched server fault, chatted in IRC, banged my head against the table, I've done it all. Surely I'm doing something wrong or forgetting something, can anyone tell me what the elephant in the room is? This stuff is supposed to work.

  Read the article

• Wireless on Medion MD96500 (Intel® PRO/Wireless 2200BG) running Windows 7

  - by Jakob Schmitt

  I just installed Windows 7 (32 bit) on a Medion MD96500 (Intel 2200BG Wireless Card) and then installed the Windows Vista (32 bit) driver. Now, in the "device driver window", the Wireless Card is listed as working/active. If I want to set up a wireless connection, however, I always get the error message "No connections available". Pushing the hardware-switch (or however that thing is called, right next to the keyboard) does not seem to have any effect.

  Read the article

• Fedora 12 Wireless problems (Intel Wireless 4965AGN Card)

  - by Ninefingers

  Hi All, I'm having an interesting experience with my wireless card at the moment. Basically, it does like this: I connect to the local wireless network (netgear router) It works, briefly, allowing me to browse a webpage or maybe two, if I'm lucky. It then stops working / sending any packets, whilst reported still connected. Now, me being me I've had a look to see what I can find. wpa_supplicant.log looks like this: Trying to associate with valid_mac:a2:30 (SSID='vennardwireless' freq=2462 MHz) Associated with valid_mac:a2:30 WPA: Key negotiation completed with valid_mac:a2:30 [PTK=CCMP GTK=TKIP] CTRL-EVENT-CONNECTED - Connection to valid_mac:a2:30 completed (reauth) [id=0 id_str=] CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys So that's working fine. dmesg | grep "*iwl*" spits out this: iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27kds iwlagn: Copyright(c) 2003-2009 Intel Corporation iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 iwlagn 0000:03:00.0: setting latency timer to 64 iwlagn 0000:03:00.0: Detected Intel Wireless WiFi Link 4965AGN REV=0x4 iwlagn 0000:03:00.0: Tunable channels: 13 802.11bg, 19 802.11a channels iwlagn 0000:03:00.0: irq 32 for MSI/MSI-X phy0: Selected rate control algorithm 'iwl-agn-rs' iwlagn 0000:03:00.0: firmware: requesting iwlwifi-4965-2.ucode iwlagn 0000:03:00.0: loaded firmware version 228.61.2.24 Registered led device: iwl-phy0::radio Registered led device: iwl-phy0::assoc Registered led device: iwl-phy0::RX Registered led device: iwl-phy0::TX iwlagn 0000:03:00.0: iwl_tx_agg_start on ra = 00:24:b2:32:a3:30 tid = 0 iwlagn 0000:03:00.0: iwl_tx_agg_start on ra = 00:24:b2:32:a3:30 tid = 0 So that's working too. I can also ping 192.168.0.1 -I wlan0 and arping 192.168.0.1 -I wlan0 the router until the network falls over. uname -r:2.6.32.10-90.fc12.x86_64. Laptop is a Core2 Duo (2Ghz) with 3GB RAM. Other symptoms I've noticed are that wireshark freezes when I capture on the "broken" interface until I disconnect. Am using networkmanager as per normal. Stupidly, I can connect to the same router via eth0/a cat6 cable just fine. Everyone else can connect to the AP fine (from Windows). Yes, I'm sat right next to it and not trying to access a hotspot the other side of the world. Any ideas? Is this a broken update? (I intend to reboot and test an older kernel later)? Anyone else come across this? Edit: iwconfig wlan0 rate auto is the settings I'm using for rates. Also, according to networkmanager the network is still connected. Thanks for any pointers / advice.

  Read the article

• Windows Vista: turn off UAC dimming.

  - by Wesley

  I'm running Windows Vista HP 32-bit on my laptop right now (used to have Windows 7 Ultimate RC 32-bit). The thing is, I miss the fact that in Windows 7, UAC could be adjusted so that the whole screen doesn't dim when UAC activates. Is there software or a tweak that I could use to stop the whole screen from dimming when UAC goes on?

  Read the article

• PXE Boot Fedora 17 Error

  - by DrifterDave

  When trying to boot into the latest Fedora 17 cd via PXE, I am presented with the following error: PXE dracut: fatal: no or empty root= argument So, I added a root= line to my fedora menu entry (shown below), but receive the following error: dracut Warning: Unable to process initqueue Any assistance would be greatly appreciated. Fedora.menu LABEL 1 MENU LABEL fedora 17 (32-bit) KERNEL fedora/17/i386/vmlinuz0 APPEND method=nfs:192.168.1.101:/srv/install/fedora/17/i386/ lang=us keymap=us ip=dhcp ksdevice=eth1 noipv6 root=/dev/ram0 initrd=fedora/17/i386/initrd0.img ramdisk_size=10000 TEXT HELP Install Fedora 17 (32-bit) ENDTEXT

  Read the article

• Intel data bus of intel 80486 and above CPU

  - by JustAGuy

  Hi, I know this might be hard question, but why does Intel 80486 and above CPUs have doubled 32 bit internal data bus? I mean, ALU is still 32bit wide, so what is that extra 32 bit bus for? Thanks.

  Read the article

• Error connecting to Sonicwall L2TP VPN from iPad/iPhone

  - by db2

  A client has a Sonicwall Pro 2040 running SonicOS 3.0, and they'd like to be able to use the L2TP VPN client from their iPads to connect to internal services (Citrix, etc). I've enabled the L2TP VPN server on the Sonicwall, made sure to set AES-128 for phase 2, and set up the configuration on a test iPad with the appropriate username, password, and pre-shared key. When I attempt to connect, I get some rather cryptic error messages in the log on the Sonicwall: 2 03/29/2011 12:25:09.096 IKE Responder: IPSec proposal does not match (Phase 2) [My outbound IP address redacted] (admin) [WAN IP address redacted] 10.10.130.7/32 -> [WAN IP address redacted]/32 3 03/29/2011 12:25:09.096 IKE Responder: Received Quick Mode Request (Phase 2) [My outbound IP address redacted], 61364 (admin) [WAN IP address redacted], 500 4 03/29/2011 12:25:07.048 IKE Responder: IPSec proposal does not match (Phase 2) [My outbound IP address redacted] (admin) [WAN IP address redacted] 10.10.130.7/32 -> [WAN IP address redacted]/32 5 03/29/2011 12:25:07.048 IKE Responder: Received Quick Mode Request (Phase 2) [My outbound IP address redacted], 61364 (admin) [WAN IP address redacted], 500 The console log on the iPad looks like this: Mar 29 13:31:24 Daves-iPad racoon[519] <Info>: [519] INFO: ISAKMP-SA established 10.10.130.7[500]-[WAN IP address redacted][500] spi:5d705eb6c760d709:458fcdf80ee8acde Mar 29 13:31:24 Daves-iPad racoon[519] <Notice>: IPSec Phase1 established (Initiated by me). Mar 29 13:31:24 Daves-iPad kernel[0] <Debug>: launchd[519] Builtin profile: racoon (sandbox) Mar 29 13:31:25 Daves-iPad racoon[519] <Info>: [519] INFO: initiate new phase 2 negotiation: 10.10.130.7[500]<=>[WAN IP address redacted][500] Mar 29 13:31:25 Daves-iPad racoon[519] <Notice>: IPSec Phase2 started (Initiated by me). Mar 29 13:31:25 Daves-iPad racoon[519] <Info>: [519] ERROR: fatal NO-PROPOSAL-CHOSEN notify messsage, phase1 should be deleted. Mar 29 13:31:25 Daves-iPad racoon[519] <Info>: [519] ERROR: Message: '@ No proposal is chosen'. Mar 29 13:31:46 Daves-iPad racoon[519] <Info>: [519] ERROR: fatal NO-PROPOSAL-CHOSEN notify messsage, phase1 should be deleted. Mar 29 13:31:46 Daves-iPad racoon[519] <Info>: [519] ERROR: Message: '@ No proposal is chosen'. Mar 29 13:31:55 Daves-iPad pppd[518] <Notice>: IPSec connection failed Does this offer any clues as to what's going wrong?

  Read the article

• My screen flickers at 1280 x 1024

  - by abcdefghijklmnopqrstuvwxyz

  My screen flickers at 1280 x 1024, 75 hertz, 32 bit color, Dell Monitor e190s 19 inch square monitor. This problem only at the above mentioned resolution , it works fine with other resolutions. I just bought this Monitor 2 days back, do you think the Monitor is defective ? Why is this problem occurring , the system says this is the recommended resolution. Can it be due to my graphic Card ATI xpress 200, 256 MB (in built). Pentium 4 Windows 7 32 bit OS

  Read the article

• Most common account names used in ssh brute force attacks

  - by Charles Stewart

  Does anyone maintain lists of the most frequently guessed account names that are used by attackers brute-forcing ssh? For your amusement, from my main server's logs over the last month (43 313 failed ssh attempts), with root not getting as far as sshd: cas@txtproof:~$ grep -e sshd /var/log/auth* | awk ' { print $8 }' | sort | uniq -c | sort | tail -n 13 32 administrator 32 stephen 34 administration 34 sales 34 user 35 matt 35 postgres 38 mysql 42 oracle 44 guest 86 test 90 admin 16513 checking

  Read the article

• SAS Expanders vs Direct Attached (SAS)?

  - by jemmille

  I have a storage unit with 2 backplanes. One backplane holds 24 disks, one backplane holds 12 disks. Each backplane is independently connected to a SFF-8087 port (4 channel/12Gbit) to the raid card. Here is where my question really comes in. Can or how easily can a backplane be overloaded? All the disks in the machine are WD RE4 WD1003FBYX (black) drives that have average writes at 115MB/sec and average read of 125 MB/sec I know things would vary based on the raid or filesystem we put on top of that but it seems to be that a 24 disk backplane with only one SFF-8087 connector should be able to overload the bus to a point that might actually slow it down? Based on my math, if I had a RAID0 across all 24 disks and asked for a large file, I should, in theory should get 24*115 MB/sec wich translates to 22.08 GBit/sec of total throughput. Either I'm confused or this backplane is horribly designed, at least in a perfomance environment. I'm looking at switching to a model where each drive has it's own channel from the backplane (and new HBA's or raid card). EDIT: more details We have used both pure linux (centos), open solaris, software raid, hardware raid, EXT3/4, ZFS. Here are some examples using bonnie++ 4 Disk RAID-0, ZFS WRITE CPU RE-WRITE CPU READ CPU RND-SEEKS 194MB/s 19% 92MB/s 11% 200MB/s 8% 310/sec 194MB/s 19% 93MB/s 11% 201MB/s 8% 312/sec --------- ---- --------- ---- --------- ---- --------- 389MB/s 19% 186MB/s 11% 402MB/s 8% 311/sec 8 Disk RAID-0, ZFS WRITE CPU RE-WRITE CPU READ CPU RND-SEEKS 324MB/s 32% 164MB/s 19% 346MB/s 13% 466/sec 324MB/s 32% 164MB/s 19% 348MB/s 14% 465/sec --------- ---- --------- ---- --------- ---- --------- 648MB/s 32% 328MB/s 19% 694MB/s 13% 465/sec 12 Disk RAID-0, ZFS WRITE CPU RE-WRITE CPU READ CPU RND-SEEKS 377MB/s 38% 191MB/s 22% 429MB/s 17% 537/sec 376MB/s 38% 191MB/s 22% 427MB/s 17% 546/sec --------- ---- --------- ---- --------- ---- --------- 753MB/s 38% 382MB/s 22% 857MB/s 17% 541/sec Now 16 Disk RAID-0, it's gets interesting WRITE CPU RE-WRITE CPU READ CPU RND-SEEKS 359MB/s 34% 186MB/s 22% 407MB/s 18% 1397/sec 358MB/s 33% 186MB/s 22% 407MB/s 18% 1340/sec --------- ---- --------- ---- --------- ---- --------- 717MB/s 33% 373MB/s 22% 814MB/s 18% 1368/sec 20 Disk RAID-0, ZFS WRITE CPU RE-WRITE CPU READ CPU RND-SEEKS 371MB/s 37% 188MB/s 22% 450MB/s 19% 775/sec 370MB/s 37% 188MB/s 22% 447MB/s 19% 797/sec --------- ---- --------- ---- --------- ---- --------- 741MB/s 37% 376MB/s 22% 898MB/s 19% 786/sec 24 Disk RAID-1, ZFS WRITE CPU RE-WRITE CPU READ CPU RND-SEEKS 347MB/s 34% 193MB/s 22% 447MB/s 19% 907/sec 347MB/s 34% 192MB/s 23% 446MB/s 19% 933/sec --------- ---- --------- ---- --------- ---- --------- 694MB/s 34% 386MB/s 22% 894MB/s 19% 920/sec 28 Disk RAID-0, ZFS 32 Disk RAID-0, ZFS 36 Disk RAID-0, ZFS More details: Here is the exact unit: http://www.supermicro.com/products/chassis/4U/847/SC847E1-R1400U.cfm

  Read the article

• Mikrotik and NAT/Routing issue

  - by arul

  I have basic NAT/Routing problem with Mikrotik RB750 that I've been unable to solve over the past days. From our ISP we have 26 IP addresses: 10.10.10.192/27, with 10.10.10.193 being the gateway and 10.10.10.194 the first available IP. What I need is that everything connected to ether2 gets a public IP from the DHCP server, and everything connected to ether3 gets a local IP from another DHCP (192.168.100.0/24). All clients should have internet access (I'll figure out bandwidth throttling later) and optimally just 'see' each other (all boxes are Win7, I guess this can ultimately be handled with VPN). Here is my setup: ether1 (10.10.10.194) is connected directly to ISP. 20 clients connected to ether2(10.10.10.195), and another 20 to ether3(10.10.10.196) (both through same 24 port switches). This is my setup, which doesn't work, all 20 clients from ether2 can access the internet, though all comm. seems to come from 10.10.10.194 (is this due to the masquerade on ether1?), and ether3 can't access the internet at all. I think that I need to masquerade ether3, and SNAT/DNAT or NETMAP ether2, but that doesn't work either, I guess that I need to somehow 'wire' both ether2+3 to ether1. Address list: # ADDRESS NETWORK INTERFACE 0 ;;; public 10.10.10.194/32 10.10.10.192 ether1-gateway 1 ;;; inner DHCP 192.168.100.0/24 192.168.100.0 ether3-private 2 ;;; public 10.10.10.195/32 10.10.10.192 ether2-pub 3 ;;; public 10.10.10.196/32 10.10.10.192 ether3-private NAT 0 ;;; ether3 nat chain=srcnat action=src-nat to-addresses=10.10.10.196 src-address=192.168.100.0/24 out-interface=ether3-private 1 ;;; ether3 nat chain=dstnat action=dst-nat to-addresses=192.168.100.0/24 in-interface=ether3-private 2 ;;; ether1 masquerade chain=srcnat action=masquerade to-addresses=10.10.10.194 out-interface=ether1-gateway Routes: # DST-ADDRESS PREF-SRC GATEWAY DISTANCE 0 A S 0.0.0.0/0 ether1-gateway 1 2 A S 10.10.10.192/27 10.10.10.195 ether2-pub 1 3 ADC 10.10.10.192/32 10.10.10.195 ether2-pub 0 ether1-gateway ether3-private 4 ADC 192.168.100.0/24 192.168.100.0 ether3-private 0 IP Pools: # NAME RANGES 0 public-pool 10.10.10.201-10.10.10.220 1 private-pool 192.168.100.2-192.168.100.254 DHCP configs: # NAME INTERFACE RELAY ADDRESS-POOL LEASE-TIME ADD-ARP 0 public-dhcp ether2-pub public-pool 3d 1 private-dhcp ether3-private private-pool 3d Thanks!

  Read the article

• Synergy reports connected but mouse doesn't hop between screens

  - by tor

  I'm using synergy between two windows computers (Windows 7 32-bit, acting as the server part, and Windows XP 32-bit, as a client). I'm running the server part as admin, as suggested in some posts when running synergy in Vista/7, and I think it's properly configured in the server part: It reports on both sides that the connection has succesfully been established, but there's no way to move the mouse from one screen to the other (neither from server2client, nor client2server). Any ideas?

  Read the article

• How to change resolution in ubuntu

  - by Daziplqa

  I am trying to change resolution in ubuntu 10.04 ( as I am used to do in ealier versions) but It didn't works for me! my /etc/X11/xorg.conf contains the following: Section "Device" Identifier "Configured Video Device" EndSection Section "Monitor" Identifier "Monitor0" EndSection Section "Screen" Identifier "Screen0" Device "Videocard0" DefaultDepth 32 SubSection "Display" Viewport 0 0 Depth 32 Modes "1024x768" EndSubSection EndSection Section "ServerLayout" Identifier "Default Layout" Screen "Default Screen" InputDevice "Synaptics Touchpad" EndSection I want to change the resolution to be 1024x768 !! please help

  Read the article

• OpenLDAP with StartTLS broken on Debian Lenny

  - by mr.zog

  I'm trying to get OpenLDAP on Lenny to work with StartTLS. I have a Fedora 13 machine which I'm using as a client for testing. So far the Fedora client is ignoring the 'host' directive in /etc/ldap.conf when I try to connect using ldapsearch. The client wants to connect to 127.0.0.1:389 even if I specify -H ldaps://server.name on when using ldapsearch. /etc/ldap.conf on the client machine is in mode 444. But even when I try connecting locally from an ssh session, I see errors like this: ldap_sasl_interactive_bind_s: Can't contact LDAP server (-1) Someone hit me with a cluebat, plz. Update: you must use ~/.ldaprc for settings such as 'host'. Also, I just used nmap against the ldap server and it showed 636 and 389 in an open state. Here's what prints to screen when I try to connect with, ldapsearch -ZZ –x '(objectclass=*)'+ -d -1 ldap_create ldap_extended_operation_s ldap_extended_operation ldap_send_initial_request ldap_new_connection 1 1 0 ldap_int_open_connection ldap_connect_to_host: TCP 192.168.10.41:636 ldap_new_socket: 3 ldap_prepare_socket: 3 ldap_connect_to_host: Trying 192.168.10.41:636 ldap_pvt_connect: fd: 3 tm: -1 async: 0 ldap_open_defconn: successful ldap_send_server_request ber_scanf fmt ({it) ber: ber_dump: buf=0x9bdbdb8 ptr=0x9bdbdb8 end=0x9bdbdd7 len=31 0000: 30 1d 02 01 01 77 18 80 16 31 2e 33 2e 36 2e 31 0....w...1.3.6.1 0010: 2e 34 2e 31 2e 31 34 36 36 2e 32 30 30 33 37 .4.1.1466.20037 ber_scanf fmt ({) ber: ber_dump: buf=0x9bdbdb8 ptr=0x9bdbdbd end=0x9bdbdd7 len=26 0000: 77 18 80 16 31 2e 33 2e 36 2e 31 2e 34 2e 31 2e w...1.3.6.1.4.1. 0010: 31 34 36 36 2e 32 30 30 33 37 1466.20037 ber_flush2: 31 bytes to sd 3 0000: 30 1d 02 01 01 77 18 80 16 31 2e 33 2e 36 2e 31 0....w...1.3.6.1 0010: 2e 34 2e 31 2e 31 34 36 36 2e 32 30 30 33 37 .4.1.1466.20037 ldap_write: want=31, written=31 0000: 30 1d 02 01 01 77 18 80 16 31 2e 33 2e 36 2e 31 0....w...1.3.6.1 0010: 2e 34 2e 31 2e 31 34 36 36 2e 32 30 30 33 37 .4.1.1466.20037 ldap_result ld 0x9bd3050 msgid 1 wait4msg ld 0x9bd3050 msgid 1 (infinite timeout) wait4msg continue ld 0x9bd3050 msgid 1 all 1 ** ld 0x9bd3050 Connections: * host: 192.168.10.41 port: 636 (default) refcnt: 2 status: Connected last used: Sun Jun 6 12:54:05 2010 ** ld 0x9bd3050 Outstanding Requests: * msgid 1, origid 1, status InProgress outstanding referrals 0, parent count 0 ld 0x9bd3050 request count 1 (abandoned 0) ** ld 0x9bd3050 Response Queue: Empty ld 0x9bd3050 response count 0 ldap_chkResponseList ld 0x9bd3050 msgid 1 all 1 ldap_chkResponseList returns ld 0x9bd3050 NULL ldap_int_select read1msg: ld 0x9bd3050 msgid 1 all 1 ber_get_next ldap_read: want=8, got=0 ber_get_next failed. ldap_err2string ldap_start_tls: Can't contact LDAP server (-1)

  Read the article

< Previous Page | 41 42 43 44 45 46 47 48 49 50 51 52  | Next Page >