Search Results

Search found 12773 results on 511 pages for 'ide controller'.

Page 45/511 | < Previous Page | 41 42 43 44 45 46 47 48 49 50 51 52  | Next Page >

• Install server 2012 on HP ML110 G7 with B110i controller, no disks found

  - by Molotch

  I'm trying to install Server 2012 on a HP ML110 G7 with a B110i controller and four non hot-swappable SATA drives. I just can't get the Server 2012 boot disk PE environment to find any disks. I have downloaded the latest SPP (Service Pack for Proliant 2012.10) and flashed the BIOS. I have tried two different HP drivers for B110i and Windows X64, 6.18.0.64 and 6.18.2.64 to no avail. I have tried setting the controller to both AHCI and legacy mode in the BIOS, no difference. HP:s SmartStart disc for G7 servers only support installation of up to Windows Server 2008R2. HP:s installation instructions for Server 2012 Essentials says boot from the windows disk and use the storage drivers found on the SPP (I can't find any storage drivers on the SPP disk).

  Read the article

• HyperV on Domain Controller or DC on HyperV?

  - by Michael Stum

  I want to setup a little fileserver/domain controller/sharepoint server. SharePoint shouldn't run on the DC directly, so I want to use HyperV. But I never used it before, so I wonder: Should I install the Domain Controller and HyperV Role and run 1 VM for SharePoint? Or should I run HyperV server and then 2 servers, one for SharePoint and 1 for DC? Usage is minimal with only 1 user. Hardware will be an Athlon II X3 with 3x2.9 GHz and 4 GB RAM. Operating System will be Server 2008 R2 Standard in all cases.

  Read the article

• ASP.NET MVC & Silverlight development - on Ubuntu

  - by queen3

  I recently moved my working environment from Windows 7 to Ubuntu, and enjoy this every minute of my working day. My work is currently to develop ASP.NET MVC and Silverlight applications. Thus, important Windows stuff is being still run in VirtualBox (such as IIS, MSSQL, Silverlight 3, and legacy COM stuff). For now, I use Visual Studio under VirtualBox as editor/IDE/debugger. But since I prefer Ubuntu fonts and UI much more I'd like to move at least editor (and better IDE) to native Ubuntu. Things I have already done: I store project files in my home folder and run Visual Studio from \vboxsvr share. With few tricks for ASP.NET it works. I use svn on Ubuntu. I test my ASP.NET MVC site using FireFox/FireBug on Ubuntu. What I need on Ubuntu: SQL client to manage MSSQL. I mostly need querying, but I would miss SQL intellisense support. I enjoy command-line svn a lot, but there're times when it's not enough (e.g. view files / check diffs / selectively commit at the sames time) so I wonder if there're any addons - I don't mean replacement for svn, just addons for rare cases like above. I wonder if there're editors that can provide some C# intellisense. Yes I know about MonoDevelop, but will it provide intellisense without compiling (since I'm going to compile remotely in Win box)? And pretty big topic, what's the best way (editor/IDE) to do "folder-based" development? What I mean: The project is /trunk. Everything is there. I don't want to manually add files to project or like that. The project is the folder and files down there. Main task is to edit files of course. I need a quick way to open / search for files in the project. Like in Resharper, I can click Ctrl-Shift-T (IIRC) and just type file name, a list of matching files in the project folder and below is shown. For example, gedit has file tree browser, but I can't quickly type XYZ to find all XYZ files there; moreover it doesn't automatically switch focus to/from editor; so it's more mouse-oriented; I need 100% keyboard way. I need syntax highlighting for C#/HTML/JS. Most importantly, I need HTML tags autocompletion. I can live without it, but I'll be sorry. I need to run compilation remotely (via ssh I think, invoking NAnt script which does MSBuild) and grab results such as errors and warnings, and I'd prefer to quickly go to error line/file. In short, I need to edit/search/open/svn/compile/run files in some folder. Looks like a case for command-line, but imaging I'm in /trunk and want to open file.cs inside /trunk/foo/bar/boo/far, I wouldn't want to type all this path even with bash autocompletion help. I'd prefer to enter :open file.cs, and maybe then select from list of file.cs and file1.cs. Well, maybe I'll add more soon. Actually, I don't have exact requirements; for example, I don't even know if I need to ask for IDE or editor; or should it have svn support integrated or I need to use it from console; do people work with files from console (search/commit/delete/etc) and open editor from there, or they work from editor/IDE and manage files (search/commit/delete) from there? What's better? I have a feeling that vim might have everything I need. I'd like to confirm that, before I spend a lot of time learning it. No I don't want Emacs. Any other IDE? I like Eclipse, but is it good for such stuff? And after all, do you feel like it's a good way to go? I enjoy Ubuntu, enjoy learning new stuff, and Ubuntu + Windows in VirtualBox actually runs faster than Windows7 on my mahcine, but maybe I need to keep development (editor/files management/etc) in Windows/VirtualBox only, leaving other stuff for Ubuntu?

  Read the article

• Where to use Controller.HttpContext

  - by Ben

  Hi, In my base controller's constructor I am calling an extension method that checks for specific cookies on the client. Currently I am using System.Web.HttpContext.Current to get the current context. However, I am lead to believe that I should be using Controller.HttpContext since it is more testable and contains additional information about the request. However, Controller.HttpContext returns null on creation (believe this is by design) but also on Initialize and Execute methods (unless I use Routing.RequestContext.HttpContext?). So if I should be using Controller.HttpContext instead of HttpContext.Current, at what point is it available to me in a request? Thanks Ben

  Read the article

• Cannot exclude a path from basic auth when using a front controller script

  - by Adam Monsen

  I have a small PHP/Apache2 web application wherein I'd like to do two seemingly incompatible operations: Route all requests through a single PHP script (a "front controller", if you will) Secure everything except API calls with HTTP basic authentication I can satisfy either requirement just fine in isolation, it's when I try to do both at once that I am blocked. For no good reason I'm trying to accomplish these requirements solely with Apache configuration. Here are the requirements stated as an example. A GET request for this URL: http://basic/api/listcars?max=10 should be sent through front.php without requiring basic auth. front.php will get /api/listcars?max=10 and do whatever it needs to with that. Here's what I think should work. In my /etc/hosts I added 127.0.0.1 basic and I am using this Apache config: <Location /> AuthType Basic AuthName "Home Secure" AuthUserFile /etc/apache2/passwords require valid-user </Location> <VirtualHost *:80> ServerName basic DocumentRoot /var/www/basic <Directory /var/www/basic> <IfModule mod_rewrite.c> RewriteEngine On RewriteCond %{SCRIPT_FILENAME} !-f RewriteCond %{SCRIPT_FILENAME} !-d RewriteRule ^(.*)$ /front.php/$1 [QSA,L] </IfModule> </Directory> <Location /api> Order deny,allow Allow from all Satisfy any </Location> </VirtualHost> But I still always get a HTTP 401: Authorization Required response. I can make it work by changing <Location /api> into <Location ~ /api> but this allows more than I want to past basic auth. I also tried changing the <Directory /var/www/basic> section into <Location />, but this doesn't work either (and it results in some strange values for PATH_TRANSLATED being passed to the script). I searched around and found many examples of selective exclusion of basic auth, but none that also incorporated a front controller. I could certainly do something like handle basic auth in the front controller, but if I can have Apache do that instead I'll be able to keep all authentication logic out of my PHP code. A friend suggested splitting this into two vhosts, which I know also works. This used to be two separate vhosts, actually. I'm using Apache 2.2.22 / PHP 5.3.10 on Ubuntu 12.04.

  Read the article

• Restart Fibre channel controller after blade bootup IBM HS bladecentre

  - by Spence

  I have a remote system that needs to resume on startup. If the system is simply powered on then the blades boot before the SAN is online and then the only thing you can do is restart the systems. Is it possible to restart the fibre channel controller? That way I could have a system restart the controller after boot, connect to the SAN and then restart all servers requiring SAN information? Please note that I'm not a sys admin, just shooting for ideas to get a clean startup to work, apologies if my terminology is wrong.

  Read the article

• Custom IIdentity and passing data from an attribute to a controller

  - by DM

  Here's my scenario: I've successfully created a custom IIdentity that I pass to a GenericPrincipal. When I access that IIdentity in my controller I have to cast the IIdentity in order to use the custom properties. example: public ActionResult Test() { MyCustomIdentity identity = (MyCustomIdentity)User.Identity; int userID = identity.UserID; ...etc... } Since I need to do this casting for nearly every action I would like to wrap this functionality in an ActionFilterAttribute. I can't do it in the controller's constructor because the context isn't initialized yet. My thought would be to have the ActionFilterAttribute populate a private property on the controller that I can use in each action method. example: public class TestController : Controller { private MyCustomIdentity identity; [CastCustomIdentity] public ActionResult() { int userID = identity.UserID; ...etc... } } Question: Is this possible and how? Is there a better solution? I've racked my brain trying to figure out how to pass public properties that are populated in an attribute to the controller and I can't get it.

  Read the article

• check if my ethernet controller supports gigabit Ethernet

  - by Infestor

  is there a command that i can issue in ubuntu to see explicitly if my ethernet controller supports gigabit ethernet?

  Read the article

• Intel 520 SSD drives not working with lsi controller on VMware esxi 5

  - by Michael

  We have a problem with our LSI 9266 controller. LSI have vmware drivers which normally show the health status of connected drives, raid controller, battery etc from within the vSphere Client. This driver also allows connectivity from the LSI MSM utility from a windows workstation. The problem is as soon as I connect my intel 520 SSD drives the health status in the vsphere client disappears, also we lose connectivity via the LSI MSM utlity. Any other drives we test are fine, 1TB SAS drives, other SSD drives etc are all OK. The Intel drives are on the compatability list and are supported by LSI but dont work with the VMware driver. If I install a windows OS on the physical server we have no problems. I have logged a ticket with LSI but they havent been very helpful. I am trying to find other people that may have had the same issue and maybe even a fix

  Read the article

• Make Custom Project template in Eclipse IDE

  - by Mohit Deshpande

  I have been using Eclipse IDE for a long time. Its a really great IDE for Java/C/C++ (and other languages with its THOUSANDS of plugins). Every once in a while, I get the need for creating a Javax interface. To do this normally, I would setup the new java project then add what I need. But, wouldn't it be nice if I could just make a template project to automatically include the code for the files. How would I go about doing this? It it even possible? The Eclipse CDT can make a new project type. So can the Google ADT and Google App engine. So I would imagine it is possible. But how?

  Read the article

• Jquery html grab + calling a controller action using javascript (ruby on rails)

  - by Zind

  Preface: I consider myself "slightly effective" in ruby on rails, and a complete novice in javascript. Also, yes, I have installed jQuery and associated plugins instead of the default Prototype library. I am in a situation where I am pulling in a table from off-site in an iframe (which is taking care of all internal JS for me) such that when a part of the table is clicked, a td will gain the class "active." What I would like to do is take this info (I'm assuming I can get it in a string format), and pass it to a method (in my controller, I'm assuming) which will parse the html, pull out the pertinent info, and then call a creation method in the same controller with the parsed info, the end result being a new item in that table. What I have so far is javascript which I believe is correct so far: <script type="text/javascript"> var ImportInfo = function() { var info = $('td.active').html(); // call controller action which parses the given string, //checks for existence in database, and adds new row if needed } $("#Import").click(ImportInfo); </script> and, of course, a button with id="ImportLocation." I have looked at this question: http://stackoverflow.com/questions/1334447/using-jquery-to-call-a-controller-action but am somewhat unsure as to how to call a controller action to pass the contents of the td as a string. Is this doable with the jQuery post method?

  Read the article

• Test Ruby-on-Rails controller with RSpec and different route name

  - by jhwist

  I have a Rails model named Xpmodule with a corresponding controller XpmoduleController. class XpmoduleController < ApplicationController def index @xpmodule = Xpmodule.find(params[:module_id]) end def subscribe flash[:notice] = "You are now subscribed to #{params[:subscription][:title]}" redirect_to :action => :index end end The original intent was to name the model Module which for obvious reasons doesn't work. However I still want to have the URLs look like /module/4711/ therefore I added this to my routes.rb: map.connect '/module/:module_id', :controller => 'xpmodule', :action => 'index' map.connect '/module/:module_id/subscribe', :controller => 'xpmodule', :action => 'subscribe' Now I want to test this controller with Rspec: describe XpmoduleController do fixtures :xpmodules context "index" do it "should assign the current xpmodule" do xpm = mock_model(Xpmodule) Xpmodule.should_receive(:find).and_return(xpm) get "index" assigns[:xpmodule].should be_an_instance_of(Xpmodule) end end end for which I get No route matches {:action=>"index", :controller=>"xpmodule"}. Which of course is sort-of right, but I don't want to add this route just for testing purposes. Is there a way to tell Rspec to call a different URL in get?

  Read the article

• Linux Mint 14 severe overheating

  - by agvares

  I've tried switching to Mint (it was Mint 12) about 6 months ago, but failed to do it due to enormous overheating which made it virtually impossible to run any applications more complex than Gedit. Time had passed, and now I'm back again with Mint 14, but feeling way more determined. What I face are the following issues: 1) Great overheating (and by great I mean that just by doing nothing my CPU temp is floating around 70-75 C, which I find a lot) 2) Running multiple applications (let's say Chrome, Skype and Pidgin) results in critical overheating and immediate shutdown of the system 3) Due to the stuff listed above, my battery drains in about 10-15 minutes, pretty much turning my laptop into a crippled desktop machine I've got a HP-dv6 laptop (i7, 6gb RAM, dual graphics) Here's the output of lspci: 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) 00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b5) 00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b5) 00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5) 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) 00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05) 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Whistler XT [AMD Radeon HD 6700M Series] 07:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) 0d:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01) 13:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5209 PCI Express Card Reader (rev 01) 19:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04) what i've tried to do already: 1) I've edited my grub file to add some "splash" arguments there 2) Installed jupiter and powertop 3) Tried to upgrade to newer kernels (up to 3.8), btw running anything newer than 3.5 results in both resolution and wi-fi detection fail 4) Read lots of forum threads devoted to the topic So, my question is simple: What else might I do to become finally able to use Mint as my default OS without the risk of being burned alive by the CPU heat?

  Read the article

• rails: checking which controller method was called from within the model

  - by bandhunt

  Is there a way to check which controller method was called from within the model? Example: Say the controller create method was called: def create do something end Then in the model do something only when create in the controller was called if create? do something end

  Read the article

• Laptop wakes from sleep, once, due to audio controller (Windows 7)

  - by stijn

  The laptop is a recent Dell XPS 15z and the problem is as follows (reproducible about 90% of tries): put laptop to sleep using either Start-Sleep or closing the lid laptop goes to sleep after about 5 seconds, but instantly wakes again showing a black screen (touching the keyboard or moving the mouse shows the login screen one normally gets after wake) login again, put laptop to sleep latop stays in sleep mode output of powercfg -lastwake after the first instant wake shows the audio controller is responsible. Why would that be, why only the first try, and how to fix this? Wake History Count - 1 Wake History [0] Wake Source Count - 1 Wake Source [0] Type: Device Instance Path: PCI\VEN_8086&DEV_1C20&SUBSYS_04461028&REV_05\3&11583659&0&D8 Friendly Name: Description: High Definition Audio Controller Manufacturer: Microsoft

  Read the article

• How to perform spring validation in multiaction controller?

  - by Yashwant Chavan

  How to perform spring validation in multiaction controller?

  Read the article

• Routing with command controller and sub controllers without using areas

  - by user205258

  How can I create a routing structure for a project management application where there are discrete controllers for all the relevant pieces such as TaskController, DocumentController etc and an Over arching controller. I would essentially like a structure like: http://server/Project/123/Task http://server/Project/123/Document I am using mvc1 so I have no access to areas etc. The project section will have a separate master page for project controllers such as task, document etc with a dfferent menu navigaton. I have tried three routes together n Global.asax like: routes.MapRoute( "Task", "Project/{id}/Task/{action}", new { controller = "Task", action = "Index", id = "" } ); routes.MapRoute( "Message", "Project/{id}/Message/{action}", new { controller = "Message", action = "Index", id = "" } ); routes.MapRoute( "Document", "Project/{id}/Document/{action}", new { controller = "Document", action = "Index", id = "" } ); What am I doing wrong here

  Read the article

• Debugging Visual Studio 2010 Unit Test and WCF Service in one IDE instance

  - by Dr.HappyPants

  I have created a WCF service in Visual Studio 2010 along with some supporting assemblies. I have also created a test project which contains multiple unit tests for the service and the supporting assemblies. Right now I have them all in one solution with the Test project having a service reference (http) to the WCF service. If I debug the WCF service and select "Run checked tests" in a Test List I created, I can debug the WCF service without a problem. Note: I cannot select Debug Checked Tests while debugging the WCF service. (Because the IDE is already debugging?) If I open the Test project in another instance of VS 2010, debug the WCF service and then select "Debug Checked Tests" - I can debug both my tests and the WCF service. However - I would like to (and my question is) be able to debug my tests and my service in a single IDE. Is this possible?

  Read the article

• ASP.Net MVC Json Result: Parameters passed to controller method issue

  - by Moskie

  I'm having a problem getting a controller method that returns a JsonResult to accept parameters passed via the JQuery getJSON method. The code I’m working on works fine when the second parameter ("data") of the getJSON method call is null. But when I attempt to pass in a value there, it seems as if the controller method never even gets called. In this example case, I just want to use an integer. The getJSON call that works fine looks like this: $.getJSON(”/News/ListNewsJson/”, null, ListNews_OnReturn); The controller method is like this: public JsonResult ListNewsJson(int? id) { … return Json(toReturn); } By putting a breakpoint in the ListNewsJson method, I see that this method gets called when the data parameter of getJSON is null, but when I replace it with value, such as, say, 3: $.getJSON(”/News/ListNewsJson/”, 3, ListNews_OnReturn); … the controller method/breakpoint is never hit. Any idea what I'm doing wrong? I should also mention that the controller method works fine if I manually go to the address via my browser ("/News/ListNewsJson/3").

  Read the article

• Frequent Netbeans freezes

  - by danilo

  I'm using Netbeans 6.8 for PHP projects located on network drives in a Windows network. Frequently, the IDE gets really slow (like a temporary freeze) to a point where it's totally unusable. At first it seems like a total crash, but after some time (might be sevaral minutes) the IDE works again as before. This happens with Netbeans 6.7 as well as 6.8 on my Windows XP 32-bit installation. I'm using Java 1.6.0_13. This is a fresh Netbeans installation, so it can't have to do with too many temp files. I assume it has to do with the frequent code checks that Netbeans does. It's probably not very fast when doing this over the network connection. But it can't be that this feature renders the IDE useless... This thread deals with the same issue http://forums.netbeans.org/viewtopic.php?t=5548. Does anyone know a solution to this problem?

  Read the article

• My linux server takes more than an hour to boot. Suggestions?

  - by jamieb

  I am building a CentOS 5.4 system that boots off a compact flash card using a card reader that emulates an IDE drive. It literally takes about an hour to boot. The ultra-slow part occurs when Grub is loading the kernel. Once that's done, the rest of the boot process only takes about a minute to get to a login prompt. Does anyone have any suggestions? I suspect that it may have to do with UDMA. Everything IDE-related in my BIOS seems to checkout. The read performance hdparm is telling me 1.77 MB/s. Ouch! (But even at that rate, it still shouldn't take an hour to decompress and load the kernel) [root@server ~]# hdparm -tT /dev/hdc /dev/hdc: Timing cached reads: 2444 MB in 2.00 seconds = 1222.04 MB/sec Timing buffered disk reads: 6 MB in 3.39 seconds = 1.77 MB/sec Trying to enable DMA is a no-go though: [root@server ~]# hdparm -d1 /dev/hdc /dev/hdc: setting using_dma to 1 (on) HDIO_SET_DMA failed: Operation not permitted using_dma = 0 (off) Here's some command outputs that might help: System [root@server ~]# uname -a Linux server.localdomain 2.6.18-164.el5xen #1 SMP Thu Sep 3 04:47:32 EDT 2009 i686 i686 i386 GNU/Linux PCI info: [root@server ~]# lspci -v 00:00.0 Host bridge: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub (rev 02) Subsystem: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub Flags: bus master, fast devsel, latency 0 Capabilities: [e0] Vendor Specific Information 00:02.0 VGA compatible controller: Intel Corporation 82945G/GZ Integrated Graphics Controller (rev 02) (prog-if 00 [VGA controller]) Subsystem: Intel Corporation 82945G/GZ Integrated Graphics Controller Flags: bus master, fast devsel, latency 0, IRQ 10 Memory at fdf00000 (32-bit, non-prefetchable) [size=512K] I/O ports at ff00 [size=8] Memory at d0000000 (32-bit, prefetchable) [size=256M] Memory at fdf80000 (32-bit, non-prefetchable) [size=256K] Capabilities: [90] Message Signalled Interrupts: 64bit- Queue=0/0 Enable- Capabilities: [d0] Power Management version 2 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 01) (prog-if 00 [UHCI]) Subsystem: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 Flags: bus master, medium devsel, latency 0, IRQ 16 I/O ports at fe00 [size=32] 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 01) (prog-if 00 [UHCI]) Subsystem: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 Flags: bus master, medium devsel, latency 0, IRQ 17 I/O ports at fd00 [size=32] 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 01) (prog-if 00 [UHCI]) Subsystem: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 Flags: bus master, medium devsel, latency 0, IRQ 18 I/O ports at fc00 [size=32] 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 01) (prog-if 00 [UHCI]) Subsystem: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 Flags: bus master, medium devsel, latency 0, IRQ 19 I/O ports at fb00 [size=32] 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01) (prog-if 20 [EHCI]) Subsystem: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller Flags: bus master, medium devsel, latency 0, IRQ 16 Memory at fdfff000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Capabilities: [58] Debug port 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) (prog-if 01 [Subtractive decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: fde00000-fdefffff Prefetchable memory behind bridge: 00000000fdd00000-00000000fdd00000 Capabilities: [50] #0d [0000] 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01) Subsystem: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge Flags: bus master, medium devsel, latency 0 Capabilities: [e0] Vendor Specific Information 00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller (rev 01) (prog-if 80 [Master]) Subsystem: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 17 I/O ports at <unassigned> I/O ports at <unassigned> I/O ports at <unassigned> I/O ports at <unassigned> I/O ports at f800 [size=16] Capabilities: [70] Power Management version 2 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01) Subsystem: Intel Corporation 82801G (ICH7 Family) SMBus Controller Flags: medium devsel, IRQ 17 I/O ports at 0500 [size=32] 01:04.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) Subsystem: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ Flags: bus master, medium devsel, latency 32, IRQ 18 I/O ports at de00 [size=256] Memory at fdeff000 (32-bit, non-prefetchable) [size=256] Capabilities: [50] Power Management version 2 01:06.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) Subsystem: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ Flags: bus master, medium devsel, latency 32, IRQ 17 I/O ports at dc00 [size=256] Memory at fdefe000 (32-bit, non-prefetchable) [size=256] Capabilities: [50] Power Management version 2 01:07.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) Subsystem: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ Flags: bus master, medium devsel, latency 32, IRQ 19 I/O ports at da00 [size=256] Memory at fdefd000 (32-bit, non-prefetchable) [size=256] Capabilities: [50] Power Management version 2 hdparm ouput: [root@server ~]# hdparm /dev/hdc /dev/hdc: multcount = 0 (off) IO_support = 0 (default 16-bit) unmaskirq = 0 (off) using_dma = 0 (off) keepsettings = 0 (off) readonly = 0 (off) readahead = 256 (on) geometry = 8146/16/63, sectors = 8211168, start = 0 [root@server ~]# hdparm -I /dev/hdc /dev/hdc: ATA device, with non-removable media Model Number: InnoDisk Corp. - iCF4000 4GB Serial Number: 20091023AACA70000753 Firmware Revision: 081107 Standards: Supported: 5 Likely used: 6 Configuration: Logical max current cylinders 8146 8146 heads 16 16 sectors/track 63 63 -- CHS current addressable sectors: 8211168 LBA user addressable sectors: 8211168 device size with M = 1024*1024: 4009 MBytes device size with M = 1000*1000: 4204 MBytes (4 GB) Capabilities: LBA, IORDY(can be disabled) Standby timer values: spec'd by Vendor R/W multiple sector transfer: Max = 2 Current = 2 DMA: mdma0 mdma1 mdma2 udma0 udma1 *udma2 udma3 udma4 Cycle time: min=120ns recommended=120ns PIO: pio0 pio1 pio2 pio3 pio4 Cycle time: no flow control=120ns IORDY flow control=120ns Commands/features: Enabled Supported: * Power Management feature set * WRITE_BUFFER command * READ_BUFFER command * NOP cmd * CFA feature set * Mandatory FLUSH_CACHE HW reset results: CBLID- above Vih Device num = 0 CFA power mode 1: enabled and required by some commands Maximum current = 100ma Checksum: correct

  Read the article

• Rspec stubing view for anonymous controller

  - by Colin G

  I'm trying to test a method on the application controller that will be used as a before filter. To do this I have setup an anonymous controller in my test with the before filter applied to ensure that it functions correctly. The test currently looks like this: describe ApplicationController do controller do before_filter :authenticated def index end end describe "user authenticated" do let(:session_id){"session_id"} let(:user){OpenStruct.new(:email => "[email protected]", :name => "Colin Gemmell")} before do request.cookies[:session_id] = session_id UserSession.stub!(:find).with(session_id).and_return(user) get :index end it { should assign_to(:user){user} } end end And the application controller is like this: class ApplicationController < ActionController::Base protect_from_forgery def authenticated @user = nil end end My problem is when ever I run the test I'm getting the following error 1) ApplicationController user authenticated Failure/Error: get :index ActionView::MissingTemplate: Missing template stub_resources/index with {:handlers=>[:erb, :rjs, :builder, :rhtml, :rxml, :haml], :formats=>[:html], :locale=>[:en, :en]} in view paths "#<RSpec::Rails::ViewRendering::PathSetDelegatorResolver:0x984f310>" According to the docs the view is not rendered when running controller tests however this points to no stub existing for this action (which is understandable as the view doesn't exist) Anyone have a clue how to solve this problem or stub the view out. Cheers Colin G

  Read the article

• Dynamic URL -> Controller mapping for routes in Rails

  - by Daniel Beardsley

  I would like to be able to map URLs to Controllers dynamically based on information in my database. I'm looking to do something functionally equivalent to this (assuming a View model): map.route '/:view_name', :controller => lambda { View.find_by_name(params[:view_name]).controller } Others have suggested dynamically rebuilding the routes, but this won't work for me as there may be thousands of Views that map to the same Controller

  Read the article

• How can I deal with No module named edit.editor ?

  - by Tomas Pajonk

  I am trying to follow the WingIDE tutorial on creating scripts in the IDE. This following example scripts always throws an error: import wingapi def test_script(test_str): app = wingapi.gApplication v = "Product info is: " + str(app.GetProductInfo()) v += "\nAnd you typed: %s" % test_str wingapi.gApplication.ShowMessageDialog("Test Message", v) Traceback (most recent call last): File "C:\Wing-pi\Scripts\test.py", line 1, in import wingapi File "C:\Program Files\Development\Wing IDE 3.1\bin\wingapi.py", line 18, in import edit.editor ImportError: No module named edit.editor Process terminated with an exit code of 1 I am launching the script in the Wing IDE as suggested by someone, but I keep getting the same result.

  Read the article

• How many disks to use for eight channel RAID controller

  - by Tvrtko

  I have a 3ware 8 channel SAS controller and a back plane extender (also 8 channel) which can take 16 drives. I will be creating a single RAID 10 volume. I know that adding more drives has positive effect on performance, but I'm not sure if adding more than 8 drives on an 8 channel controller will have any positive impact at all. Am I wrong? Should I put 16 drives for best performance? Would 8 drives give me the same performance?

  Read the article

< Previous Page | 41 42 43 44 45 46 47 48 49 50 51 52  | Next Page >