Search Results

Search found 64841 results on 2594 pages for 'linux on system z'.

Page 45/2594 | < Previous Page | 41 42 43 44 45 46 47 48 49 50 51 52  | Next Page >

• USB mouse disconnecting and reconnecting in windows and linux

  - by Kalak

  I have a problem similar to what is described at "Why is my USB mouse disconnecting and reconnecting randomly and often?" except is is happening in both Windows 7 and Linux (Ubuntu 12/04TLS, fully patched), multiple mice, multiple OSs. It stops responding to input for about 3-5 seconds, then starts responding again. It's more frequent and lasts longer when running games (TF2, L4D, Dishonored, Borderlands 2, and more), but happens when just running the OS as well. I was hoping it was the motherboard so I bought a USB 2.0 PCI card to try that, but it's still happening. I've stripped it down to just the keyboard and mouse (different keyboard too just in case the keyboard was the problem), but it's still happening. All the hardware (mice and keyboards) work fine on other computers. I have literally pulled the mouse and keyboard out and plugged them into another computer (laptop) and re-joined the online game and had no problem with the keyboard and mouse combo that just failed on my gaming rig. Please no driver / Windows or Linux only suggestions, as that wouldn't effect both OSs. edit: known good mice I've brought home are now going bad. I suspect the hardware is messed up (voltage?) and has been frying the mice.

  Read the article

• Nice level not working on linux

  - by xioxox

  I have some highly floating point intensive processes doing very little I/O. One is called "xspec", which calculates a numerical model and returns a floating point result back to a master process every second (via stdout). It is niced at the 19 level. I have another simple process "cpufloattest" which just does numerical computations in a tight loop. It is not niced. I have a 4-core i7 system with hyperthreading disabled. I have started 4 of each type of process. Why is the Linux scheduler (Linux 3.4.2) not properly limiting the CPU time taken up by the niced processes? Cpu(s): 56.2%us, 1.0%sy, 41.8%ni, 0.0%id, 0.0%wa, 0.9%hi, 0.1%si, 0.0%st Mem: 12297620k total, 12147472k used, 150148k free, 831564k buffers Swap: 2104508k total, 71172k used, 2033336k free, 4753956k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 32399 jss 20 0 44728 32m 772 R 62.7 0.3 4:17.93 cpufloattest 32400 jss 20 0 44728 32m 744 R 53.1 0.3 4:14.17 cpufloattest 32402 jss 20 0 44728 32m 744 R 51.1 0.3 4:14.09 cpufloattest 32398 jss 20 0 44728 32m 744 R 48.8 0.3 4:15.44 cpufloattest 3989 jss 39 19 1725m 690m 7744 R 44.1 5.8 1459:59 xspec 3981 jss 39 19 1725m 689m 7744 R 42.1 5.7 1459:34 xspec 3985 jss 39 19 1725m 689m 7744 R 42.1 5.7 1460:51 xspec 3993 jss 39 19 1725m 691m 7744 R 38.8 5.8 1458:24 xspec The scheduler does what I expect if I start 8 of the cpufloattest processes, with 4 of them niced (i.e. 4 with most of the CPU, and 4 with very little)

  Read the article

• Debian Squeeze Linux 9p virtfs guest mount failure

  - by Tero Kilkanen

  First some background information on the server: Host OS: Debian Linux Squeeze + qemu-kvm version 1.0+dfsg-8~bpo60+1 Guest OS: Debian Linux Squeeze I use qemu-kvm via libvirt. I have set up 9p VirtFS with the following in Guest's XML config: <filesystem type='mount' accessmode='passthrough'> <source dir='/srv/www'/> <target dir='wwwdata'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/> </filesystem> That is, I want to share /srv/www to the guest OS using mount tag wwwdata. When I try to mount the VirtFS share from the guest, I get an error message: root@server:~# mount -t 9p -o trans=virtio,version=9p2000.L2 wwwdata /srv/www/ mount: wwwdata: can't read superblock I also tried virtfs target dir/mount_tag www at first. I got the same error message. However, I was able to mount the VirtFS share using mount tag www1111, or www1 or similar. Some more notes on this one. dmesg doesn't show anything useful either in guest or the host. The only sign is this entry in the guest dmesg: [ 36.054936] Installing v9fs 9p2000 file system support Does anyone know how to get this working correctly? Google gives no useful information on this issue; I've tried several searches.

  Read the article

• locked files on HFS+ home partition shared between OSX/Linux

  - by HazyBlueDot

  I dual boot into Arch Linux and OS X 10.6 on my MacBook pro. I synced my UID between both OSes and created an HFS partition (with no journaling) to use as a shared home/Users partition. For the most part it works just as I'd expect, but sometimes when I'm booted into OS X certain files are "locked" (when I get info on a particular file the "Locked" box is checked under the "General" pane. I can resolve the issue by manually unchecking the box) and/or I get "Operation not permitted" when I try deleting or chmod'ing a file. In both cases I don't see anything out of the ordinary on the permission bits displayed with ls -l, except for a trailing '@' character in the position where the sticky bit would normally occur: -rw-r--r--@ 1 myuser mygroup 296 Mar 29 11:44 myfile This '@' character shows up on ALL normal files, so doesn't seem to be linked to the locked/operation not permission situation. On the Linux side of things I never have permission problems. To the best of my limited knowledge and experience with ACLs I've not found any ACLs on any of the files in question. For what it's worth, I do most of my file editing using emacs (Aquamacs in OSX), is it possible it is setting weird permission bits? What is the "locked" setting that OS X uses and does it have a permission bit equivalent (so at the very least I could recursively unlock all files in my home directory from the terminal) why might some, but not other files get "locked" when booting into OS X what is the meaning of the '@' character?

  Read the article

• hadoop: port appears open locally but not remotelly

  - by miguel

  I am new to linux and hadoop and I am having the same issue as in this question. I think I understand what is causing it but I don't know how to solve it (Don't know what they mean by "Edit the Hadoop server's configuration file so that it includes its NIC's address."). The other post that they link says that the configuration files should refer to the machine's externally accessible host name. I think I got this right as every hadoop configuration file refers to "master" and the etc/hosts file lists the master by its private IP address. How can I solve this? Edit: I have 5 nodes: master, slavec, slaved, slavee and slavef all running debian. This is the hosts file in master: 127.0.0.1 master 10.0.1.201 slavec 10.0.1.202 slaved 10.0.1.203 slavee 10.0.1.204 slavef this is the hosts file in slavec (it looks similar in the other slaves): 10.0.1.200 master 127.0.0.1 slavec 10.0.1.202 slaved 10.0.1.203 slavee 10.0.1.204 slavef the masters file in master: master the slaves file in master: master slavec slaved slavee slavef the masters and slaves file in slavex has only one line: slavex

  Read the article

• Using ZFS or XFS on a Xen guest running Linux

  - by zoot

  Background: I'm investigating the viability of using a filesystem other than ext3/4, with the ability to run snapshots for backup and rollback purposes. The servers under consideration are mailbox server nodes running on Linode's Xen based VPS platform. I'm particularly drawn to the various published benefits which ZFS offers in terms of data integrity and this year's stable release of native ZFS support in Linux - http://zfsonlinux.org ZFS appears to be the more thorough option in terms of benefits and simplicity (instead of LVM+XFS). Please note that I have little experience with ZFS (which I use on a local FreeNAS installation) and none with XFS, hence the post. To date, my servers are using ext3 filesystems, not managed under LVM. Question in detail: So, I have two questions. (1) Which of the two filesystems would be the better choice for the best of all of the following 3 aspects, running on a Xen Linux guest? Snapshots Data Integrity Performance (2) If ZFS is a viable option, is it practical to use ZRAID across Xen disk images to further enhance the solution for data integrity? Note: I'm reluctant to consider btrfs, given the many warnings I've read about in using it on production systems.

  Read the article

• Windows Share authentication from Active Directory Linux login

  - by Kenny

  I'm using Active Directory to log into RHEL. To do this, I followed the steps outlined here: http://www.markwilson.co.uk/blog/2007/05/using-active-directory-to-authenticate-users-on-a-linux-computer.htm I'd like to be able to read data from Windows Servers shared folders without being prompted for a password. On Windows I log into an AD domain, and when I access windows file shares on a server on the LAN (also part of the AD domain) my I can just access them with no authentication step. I've used SMBclient on Linux to access these shares, but it asks for my password. I would like to be able to script access to the data on the shares, but I can't if there's a password prompt in the way. Well, I could, but it's not how I want to do it. Now, since I'm logged in using my active directory username & password, can't I just access the shares without jumping that extra hoop? I know I can mount the share using something like: //192.168.0.5/share /mnt/windows cifs auto,username=steve,password=secret,rw 0 0 but access will depend who is logged in... each user logging in should have their own unique AD access privelages. Thanks for reading!

  Read the article

• Slow performance on VMWare Linux server after Tomcat install

  - by Loftx

  We have a VMWare ESXi 4.1 server hosting a number of Linux and Windows guests. Recently a new Linux guest was added to this server and seemed to be performing well. Tomcat and some other applications on this server were then installed which seem to have caused the server to run really slowly without any obvious resource issues. Slow performance include: The time taken to bring up the password prompt over ssh takes a few seconds when it was previously instantaneous. The time taken to unzip a zip file which was previously a few seconds now takes around 30 seconds The time taken to compile vmware tools has increased by similar factors Both the VMWare console and monitoring commands don't report any issues with high CPU or memory usage but something is obviously slowing the server down somehow. Does anyone have any ideas what may be causing this issue and how it can be resolved? Thanks, Tom Edit As per your questions I’ve looked at some of the performance indicators on both the VM host and VM guest indicated. Firstly I tried reserving the full amount of memory (3gb) for this VM – no other machines on this server have any memory reservation. The swap in rate and swap out rate for the VM host and guest are now both zero. Balloon memory on the guest is zero and on the host is 3.5gb (total memory on the host is 12gb) The swap rate for the guest is also zero. Swap used by the host is 200mb on average. Compression and decompression rates for the host and guest are zero. Command aborts for the host are zero. Read latency is very low – maximum 10ms average 0.8ms. Write latency is higher – a few spikes to 170ms but mostly around 25ms – is this bad? Queue command latency is zero . Physical disk read latency averages 5ms but often 10ms Physical disk write latency averages 15ms but is often 20ms I hope this helps - let me know if you need any more information.

  Read the article

• Restoring the owners on debian system files

  - by Vlad

  Due to my inattention, tiredness (and probably stupidity) i've run chown -R someuser:someuser / and now all your base are belongs to us the files on the server belong to one user (lol). After system restart apache, bind9, mysql, and a dozen of other applications don't start and fill their log files with permission errors. I haven't done any backups on system files, only on the db and website files... Please suggest some ways to revive my web server. I have only 2 month experience with linux, so please keep it simple...

  Read the article

• Linux: prevent VNC from swapping like mad

  - by Weezy

  I'm accessing a MacMini (with MacOS X 10.4) from my Linux machine using VNC and there's an issue that is driving me crazy... My Linux machine has 4 GB of ram and I run a lot of various apps on it and I've got no issue at all. It's all snappy and don't hear the hard disk swapping/read/writing too often. Now with VNC, the hard disk is swapping like mad... When I'm moving things on the OS X desktop. So I was thinking of creating a ramdisk and forcing the temp VNC files to go into that ramdisk but the problem is I can't find any temp files. I've attempted to do that: #!/bin/bash while [ true ] do lsof | grep vnc done And eyeball parse the output to try to find some temp file: no luck. The VNC version I'm using is this one: $ vncviewer -version VNC Viewer Free Edition 4.1.1 for X - built Jan 30 2009 19:33:16 Copyright (C) 2002-2005 RealVNC Ltd. No matter how much data is coming from the Mac, there should be plenty of memory (4 GB of ram) so there's really no reason to swap like crazy. This is driving me mad. Any help as to how I could solve this problem is most welcome because this is literally driving me nuts.

  Read the article

• Windows Share authentication from Active Directory Linux login

  - by Kenny

  Hi, I'm using Active Directory to log into RHEL. To do this, I followed the steps outlined here: http://www.markwilson.co.uk/blog/2007/05/using-active-directory-to-authenticate-users-on-a-linux-computer.htm I'd like to be able to read data from Windows Servers shared folders without being prompted for a password. On Windows I log into an AD domain, and when I access windows file shares on a server on the LAN (also part of the AD domain) my I can just access them with no authentication step. I've used SMBclient on Linux to access these shares, but it asks for my password. I would like to be able to script access to the data on the shares, but I can't if there's a password prompt in the way. Well, I could, but it's not how I want to do it. Now, since I'm logged in using my active directory username & password, can't I just access the shares without jumping that extra hoop? I know I can mount the share using something like: //192.168.0.5/share /mnt/windows cifs auto,username=steve,password=secret,rw 0 0 but access will depend who is logged in... each user logging in should have their own unique AD access privelages. Thanks for reading!

  Read the article

• Created User in Linux (Ubuntu) Without Creating a Home Directory - Causing Problems

  - by nicorellius

  This may be a rookie mistake, but I created a user (new user) in Linux on a Ubuntu system and didn't actually create the home directory for this user. Now, when I log in, it says there are problems... If I delete the path home/<new user> and try to log in the system tells me I can use root as home directory but I will likely experience problems, and then it won't let me log in. What is the best way to create this directory with the appropriate permissions? Should I just create another user and delete this one? I need some help...

  Read the article

• PC only boots from Linux-based media and won't boot from DOS-based media

  - by xolstice

  I have this problem where the PC only seems to boot from a floppy disk or CD if it was created as a Linux-based bootable media. If it was created as a DOS-based bootable media the system just freezes at the starting point of the boot process. I originally asked this under question 139515 for CD booting only, and based on the given answers, I was under the impression the problem was with the CD-ROM drive; however, I have since installed a newly purchased CD-ROM drive and the same freezing occurs. This then made me try the DOS bootable floppy disk approach and I was quite surprised that it exhibited the same freezing problem. I then tried try a Linux bootable floppy and everything booted from it without any issues. As I mentioned in my original question, the PC was booting just fine from the DOS-based bootable CD, and then it suddenly decides to pull this freezing stunt. I can't remember if I changed anything in the BIOS settings that may I have caused the problem, but I am wondering if that could be the case - it is currently using the Award Module BIOS v4.60PGMA. Can anyone help?

  Read the article

• The RTL8111/8168B NIC under Linux and the r8168 driver

  - by nik

  So I've got one of the infamous R8168 Realtek ethernet NIC, which have some problems under Linux. After some research, I found out I had to use the r8168 driver for this card (and not the r8169 which still loads when nothing else is available), which I did. So now everything works fine... Sort of. My download and upload rates are more than halved compared to what I should get. When I test (with eg. speedtest) I get something like 20M (often 15M) in download and 30M in upload, but if I test under Windows (everything is otherwise identical: same ethernet cable, same connection, at the same time of the day (well 5 min apart)...), I get 50M upload/download (which is what I expect). Where can it come from? Here's some info: ~ # lspci [...] 06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) ~ # modinfo r8168 filename: /lib/modules/3.2.1-gentoo-r2/net/r8168.ko version: 8.027.00-NAPI license: GPL description: RealTek RTL-8168 Gigabit Ethernet driver author: Realtek and the Linux r8168 crew <[email protected]> srcversion: 0A6E9F1D4E8E51DE4B6BEE3 alias: pci:v00001186d00004300sv00001186sd00004B10bc*sc*i* alias: pci:v000010ECd00008168sv*sd*bc*sc*i* depends: vermagic: 3.2.1-gentoo-r2 SMP mod_unload [...] ~ # mii-tool -v eth0: negotiated 100baseTx-HD, link ok product info: vendor 00:07:32, model 17 rev 4 basic mode: autonegotiation enabled basic status: autonegotiation complete, link ok capabilities: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD advertising: 100baseTx-HD 10baseT-FD 10baseT-HD flow-control link partner: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD

  Read the article

• linux + create host file from CSV file by sed or awk or perl

  - by yael

  I have the following CSV file this file defined which Linux machine exist in the system and there ip's my target is to create host file from this file please advice how to create host file as example 1 from my CSV file ( I need to match the IP address from CSV file and put it on the first field of the host file , then match the LINUX name and locate this name in the sec field – as example 1 ) remark - should be performed by sed or awk or perl .. , I need to write the solution in my bash script CSV file , machine , VM-LINUX1 , SZ , Phy , 10.213.158.18 , PROXY , VM-LINUX2 , SZ , 10.213.158.19 , OLD HW , VM-LINUX3 , SZ , 10.213.158.20 , , VM-LINUX4 , SZ , Phy , 10.213.158.21 , , VM-LINUX5 , SZ , Phy , OUT , EXT , LAN3 , 10.213.158.22 , INTERNAL , VM-LINUX6 , SZ , Phy , 10.213.158.23 , , server , new HW , VM-LINUX7 , SZ , Phy , 10.213.158.24 , OUT, LAN3 , VM-LINUX8 , SZ , 10.213.158.25 , OLD HW , machine , VM-LINUX9 , SZ , Phy , INT , 10.213.158.26 , LAN2, AN45, , VM-LINUX10 , SZ , Phy , 10.213.158.27 , , VM-LINUX11 , SZ , Phy , LAN5 , 10.213.158.28 , example 1 ( host file ) 10.213.158.18 VM-LINUX1 10.213.158.19 VM-LINUX2 10.213.158.20 VM-LINUX3 10.213.158.21 VM-LINUX4 10.213.158.22 VM-LINUX5 10.213.158.23 VM-LINUX6 10.213.158.24 VM-LINUX7 10.213.158.25 VM-LINUX8 10.213.158.26 VM-LINUX9 10.213.158.27 VM-LINUX10 10.213.158.25 VM-MACHINE8 10.213.158.26 STAR9 10.213.158.27 TOP10 10.213.158.28 SERVER11

  Read the article

• Use one NIC to create multiple interfaces for Linux KVM

  - by Phanto

  I am working on a thesis research project, and I am having some difficulty figuring out how to make one NIC spawn several "bridge" interfaces such that each KVM VM can be seen on the local network. I am very new to KVM, and am still exploring what it can do. Below is the scenario that I am attempting to make (on a CentOS/RHEL 6 system): Linux KVM Host has 1 NIC (eth0) connected to a switch. Create multiple "bridge" or equivalent interfaces that are spawned off of eth0 that would provide a unique IP for each VM. This is so that each VM can communicate with other hosts on the network, and that other hosts on the network can communicate with the VM. IMPORTANT: I would like iptables on the KVM host to be able to manipulate/control/restrict the traffic that would be sent on those "bridge" interfaces. I would like to create a minimum of three VM's, each using their own unique "bridge" interfaces. I have previously made a br0 interface off of eth0, but unfortunately, I am unable to add any more to it. It appears that you can only bridge 1 interface to the NIC. I would like to bridge many to one. Would a tap device be able to do this? If so, how would it be set up? Effectively, I am attempting to replicate what can easily be created with VirtualBox on Windows, where each VM is given a "bridged" interface, and can live on the network. I want to achieve this very same thing with Linux KVM. Thank You EDIT: To be more descriptive, I want to achieve something that looks like this: This can be found on this page: http://en.gentoo-wiki.com/wiki/KVM#Networking_2 HOST +---------------+ | | KVM GUEST1 | | +--------------+ | +------+ | | | LAN ---+--- eth0 | +--+---+---- nic0 | KVM GUEST2 | | tap0----+ | |192.168.1.13 | +--------------+ | | tap1----+ | +--------------+ | | | +------+ | | | | | br0 +--+----------------------+---- nic0 | |192.168.1.12 | |192.168.1.14 | +---------------+ +--------------+

  Read the article

• who has files open on a linux server

  - by Robert

  I have the fairly common task of finding who has files open on our Linux (Ubuntu ) file server in our Windows environment. We use Samba on the network and I use Putty from my workstation to establish a shell window to run bash scripts. I have been using something like this to find what files are open: (this returns a list of process ids with each open file) Robert:$ sudo lsof | grep "/srv/office/some/folder" Then, I follow up with something like this to show who owns the process: (this returns the name of the machine on the network using the IP4 protocol who owns the process) Robert:$ sudo lsof -p 27295 | grep "IPv4" Now I know the windows client who has a file open and can take action from there. As you can tell this is not difficult but time consuming. I would prefer to have a windows application I can run that would just give me what I want. So, I have been thinking about creating some process I can run on Linux that listens on a port and then returns a clean list of all open files with the IP address of the host who has the file open. Then, a small windows client application that can send the request on the port. It seems like this should be a very common need but I can not find anything like this that has been done before. Any suggestions?

  Read the article

• AWS Linux EC2: yum won't run with plugins

  - by Patrick

  Short Version: yum commands on my Amazon Linux EC2 AMI only work with --noplugins. Long Version: A couple of days ago, I ran yum update at the behest of the SSH Login MoTD telling me I had updates to install. About midway through the update (specifically while updating the kernel), the update abruptly ended (79 of 138 items completed). The website I host on EC2 got weird for a few minutes, but eventually seemed to stabilize back out (maybe EC2 restarted itself?), and I didn't have further issues (other than MySQL started running out of memory, but I think that's probably unrelated to this). Today, I went to install gcc-c++ (with yum install gcc-c++). When I did, I got the following message: Loaded plugins: priorities, security, update-motd, upgrade-helper Config error: Command "updateinfo" already defined and I get that for any command I can think to run using yum. However, If I throw in the --noplugins flag, then magically it seems to work. To be clear, when I installed a different package a week ago, it worked totally correctly, so the yum update is the only thing I can think of that changed. I could find nothing on Google with regard to "updateinfo" already defined (with and without quotes). I tried running yum update --noplugins which spit out a message telling me that I should have run yum-complete-transaction instead, but proceeded to try to update something on its own. When that completed, I tried yum-complete-transaction but that gave me a message about the transactions not lining up correctly, so it removed the old transaction (Probably since I should have completed the first transaction before trying to update again, if I had known). Based on the SF question "Linux EC2 Broken Yum", I've also tried yum clean all --noplugins (fails the same with plugins) which just gives me Cleaning repos: amzn-main amzn-updates rpmforge Cleaning up everything I also tried package-cleanup --problems Loaded plugins: priorities, update-motd, upgrade-helper No Problems Found and package-cleanup --dupes Gives a lot of dupes, so I pasted them here: http://pastebin.com/VVFQEkTT instead of inline. At this point, I'm not sure what else there even is to check.

  Read the article

• Understanding the Linux Root

  - by Zac

  I've been using Linux (Ubuntu) for about 2 weeks now and am still struggling with some basic concept surrounding the root user: (1) Some terminal operations (such as making subdirectories inside a FHS directory such as /opt) require me to prefix the command with sudo - why? I guess what I'm choking on is: if I'm already logged in as a valid system user, why do I have to be a superuser/root in order to modify things that the sysadmin has already deemed me worthy of accessing? (2) Is there a GUI (Gnome, KDE) equivalent to sudo? Is there a way to assume a superuser role through a graphical context, rather than from inside a new shell? (3) I can't access the /root directory logged in as myself... but I installed the system to begin with and was never asked to create a root account! How do I log in as root and gain access to /root?!? Thanks for all feedback & input!

  Read the article

• Understanding the Linux Root

  - by Zac

  I've been using Linux (Ubuntu) for about 2 weeks now and am still struggling with some basic concept surrounding the root user: (1) Some terminal operations (such as making subdirectories inside a FHS directory such as /opt) require me to prefix the command with sudo - why? I guess what I'm choking on is: if I'm already logged in as a valid system user, why do I have to be a superuser/root in order to modify things that the sysadmin has already deemed me worthy of accessing? (2) Is there a GUI (Gnome, KDE) equivalent to sudo? Is there a way to assume a superuser role through a graphical context, rather than from inside a new shell? (3) I can't access the /root directory logged in as myself... but I installed the system to begin with and was never asked to create a root account! How do I log in as root and gain access to /root?!? Thanks for all feedback & input!

  Read the article

• Linux RFID reader HID Device not matching driver

  - by blietaer

  Hello, I got a RFID reader (GigaTek PCR330A-00) that is meant to be recognized under linux/windows as a (Human Interface Device) keyboard/USB. I hate to say this but it is working as a charm under Win7 but not "really" under Linux. Under Debian-like distros (x/k/Ubuntu, Debian,..), or Gentoo, or... I just can't have the device working at all: the device scan well (it has its USB 5V, so it is happy/beeping/blinking) something happened in the dmesg, but no immediate screen display of the RFID Tag code as expected (and seen under win7) Support is claiming it is ok under RHEL or SLED "enterprises" distros... and I must admit I saw it working under a RHEL4... I tried stealing the driver but did not succeed having my reader working... My question is thus double: 1./ How can I hack the kernel to add support to my device (simply register PID/VID?) ? 2./ What is different at all in a "enterprise" proprietary distro? how can I re-use it? Thank you for any hint/help. Cheers,

  Read the article

• Synchronizing files between Linux servers, through FTP

  - by Daniel Magliola

  I have the following configuration of servers: 1 central linux server, a VPS 8 satellite linux servers, "crappy shared hostings" I have a bunch of files that I need to have in all servers. Right now i'm copying them everywhere manually, but I want to be able to copy them to the central server, and then have a scheduled process that runs every now and then and synchronizes them (only outwardly, no need to try to find "new" files in the satellite servers). There are a couple of catches though: I can't have any custom software in the satellite servers, or do strange command line things that'll auto connect to them and send the files directly. I know this is the way these kinds of things are normally done, but the satellite servers are crappy shared hosting ones where I have absolutely no control over anything. I need to send the files over FTP I also need to have, in my central server, a list of the files that are available in each of the satellite servers, to make sure they are ready before I send traffic to them. If I were to do this manually, the steps would be: get the list of files in a satellite server compare to my own, and send the files that are missing get the list of files again, and store it in my central database. I'd like to know what tools are out there that can alleviate as much of this as possible, first the syncing, and then the "getting the list of files available in the other server". I'm going to be doing everything from PHP, not sure if there are good tools to "use FTP from PHP", which i'm pretty sure i'll have to do for step 3 at least. Thanks in advance for any ideas! Daniel

  Read the article

• AVCHD MTS h264 1080p file with choppy playback in Linux

  - by marc

  When I'm trying play video files from my camera: Seems stream 0 codec frame rate differs from container frame rate: 50.00 (50/1) -> 50.00 (50/1) Input #0, mpegts, from '00027.MTS': Duration: 00:00:38.88, start: 2.884289, bitrate: 16945 kb/s Program 1 Stream #0.0[0x1011]: Video: h264 (High), yuv420p, 1920x1080 [PAR 1:1 DAR 16:9], 50 fps, 50 tbr, 90k tbn, 50 tbc Stream #0.1[0x1100]: Audio: ac3, 48000 Hz, stereo, s16, 256 kb/s … on my Linux computer (Ubuntu 12.04), I get choppy playback. It's completly unusable... I tried: Totem VLC mplayer The result is always same issue. I sent the same video file to a friend who has ubuntu 10.04 to test, and he also has the same issue. He has Windows 7, and confirms that on Windows, the video work well. I have an Intel® Core™2 CPU 6300 @ 1.86GHz × 2 with GF 9600 GT, with closed NVIDIA drivers. This is not any kind of issue with big files playing slow from an HDD issue. I have an SSD drive! I spent the last days and nights, trying hundreds of commands for ffmpeg, handbrake, mencoder... Any of them won't let me create a file with enough quality. I downloaded few movies from YouTube in 1080p, and playback worked well without any big pixels and choppiness. I would like have highest possible quality, I will put following files onto a Blu-ray disk so I don't need to compress them to get a smaller size. I just want smoth playback on my Linux box. On Windows, the same file is working well.

  Read the article

• Unable to compile netmap on Fedora 32 bit

  - by John Elf

  This is the error everytime I try to install netmap: Can someone let me know how to isntall the same on e1000e or ixgbe. I have kernel header and source installed. [root@localhost e1000]# make KSRC=/usr/src/kernels/2.6.35.6-45.fc14.i686/ make -C /usr/src/kernels/2.6.35.6-45.fc14.i686/ M=/media/sf_Shared/netmap-linux/net/e1000 modules make[1]: Entering directory /usr/src/kernels/2.6.35.6-45.fc14.i686' CC [M] /media/sf_Shared/netmap-linux/net/e1000/e1000_main.o /media/sf_Shared/netmap-linux/net/e1000/e1000_main.c: In function ‘e1000_setup_tx_resources’: /media/sf_Shared/netmap-linux/net/e1000/e1000_main.c:1485:2: error: implicit declaration of function ‘vzalloc’ /media/sf_Shared/netmap-linux/net/e1000/e1000_main.c:1485:20: warning: assignment makes pointer from integer without a cast /media/sf_Shared/netmap-linux/net/e1000/e1000_main.c: In function ‘e1000_setup_rx_resources’: /media/sf_Shared/netmap-linux/net/e1000/e1000_main.c:1680:20: warning: assignment makes pointer from integer without a cast /media/sf_Shared/netmap-linux/net/e1000/e1000_main.c: In function ‘e1000_tx_csum’: /media/sf_Shared/netmap-linux/net/e1000/e1000_main.c:2780:2: error: implicit declaration of function ‘skb_checksum_start_offset’ /media/sf_Shared/netmap-linux/net/e1000/e1000_main.c: In function ‘e1000_rx_checksum’: /media/sf_Shared/netmap-linux/net/e1000/e1000_main.c:3689:2: error: implicit declaration of function ‘skb_checksum_none_assert’ /media/sf_Shared/netmap-linux/net/e1000/e1000_main.c: In function ‘e1000_restore_vlan’: /media/sf_Shared/netmap-linux/net/e1000/e1000_main.c:4617:23: error: ‘VLAN_N_VID’ undeclared (first use in this function) /media/sf_Shared/netmap-linux/net/e1000/e1000_main.c:4617:23: note: each undeclared identifier is reported only once for each function it appears in make[2]: *** [/media/sf_Shared/netmap-linux/net/e1000/e1000_main.o] Error 1 make[1]: *** [_module_/media/sf_Shared/netmap-linux/net/e1000] Error 2 make[1]: Leaving directory/usr/src/kernels/2.6.35.6-45.fc14.i686' make: * [all] Error 2

  Read the article

• How to install Red Hat Enterprise Linux on Apple Macbook Pro MacBookPro4,1

  - by Todd V. Rovito

  I have a one year old Mac Book Pro that I am trying to get RHEL 5.4 installed on via bootcamp. No matter what I do I can't get the installer to boot. I have tried multiple DVD's and even verified the install works on a new Mac Book Pro. Most of the time the installer simply locks up. I usually use Linux text with all-generic-ide on the boot line. I removed the ide parameter and I just used linux text. The results I get are that a bunch of kernel messages appear then the background turns blue and a thin text box pops up saying its loading ata..... something it disappears too fast for me to read. Then the machine freezes. I pressed the alt function keys to see if I could look at the system log, here is what it says: Alt-f3 says "trying to mount CD device hda" Alt-f4 says status error: hda: lastFailedSense Hda: Failed opcode was: unknown Hda: Lost interrupt Hda: Drive not ready for command Ide-cd: command 0x3 timed out Above this junk it looks like it found the partition because it knew it was 20 GB and listed as /dev/sda3. I think it has something to do with the CD drive, is that possible? Thanks again for the support. PS I posted in the apple support forums ( Apple.com Support Discussions Boot Camp Installation and Storage) and didn't get an answer.

  Read the article

< Previous Page | 41 42 43 44 45 46 47 48 49 50 51 52  | Next Page >