Search Results

Search found 18321 results on 733 pages for 'network teaming'.

Page 45/733 | < Previous Page | 41 42 43 44 45 46 47 48 49 50 51 52  | Next Page >

• Can't connect to Wired Network after installing 12.04

  - by ezz9

  I have installed 12.04 into a used HP Compaq DC 7100 CMT. Plugged in LAN cable into the computer and it says network disconnected. from what I understand on the things I've read, it's not getting the address right, maybe it's just a guess (hardware address 00:16:35:78:47:bb). I know the LAN cable is working I can get on the net with the old computer. (Old computer is using device MAC address; Auto eth0 00:11:11:E6:4F:FE). I have put this address into the newer HP and it shows last used (minutes ago) but no Internet sever not found. I tried the hardware address it says never. I feel and think this should be easy to fix. But I just don't know. Here is the info everyone has asked for, but they never say what I should do. sudo lshw -C network; rfkill list; cat /etc/network/interfaces; cat /etc/lsb-release; lspci -nn; lsusb; uname -a; ifconfig; route -n *-network description: ethernet interface product; NetXtreme BCM5751 Gigabit Ethernet PCI Express vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:40:00.0 logical name: eth0 verson: 01 serial: 00:16:35:78:47:bb size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000-fd configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion= 3.121 duplex=full firmware=5751-v3.29a latency=0 link=yes multicast=yes port=twi sted pair speed=100Mbit/s resources: irq:17 memory:f0400000-f040ffff auto lo iface lo inet loopback DISTRIB_ID=Ubuntu DISTRIB_RELEASE=12.04 DISTRIB_CODENAME=precise DISTRIB_DESCRIPTION= "Ubuntu 12.04 LTS" 00:00.0 host bridge [0600]: Inter Corporation 82915G/P/GV/GL/PL/910GL Memory Con troller Hub [8086:2580] (rev 04) 00.02.0 VGA compatible controller [0300]: Intel Corporation 82915G/GV/910GL inte grated Graphics Controller [8086:2582] (rev 04) 00:1c.0 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 [8086:2660] (rev 03) 00:1c.1 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 [8086:2662] (rev 03) 00:1d.0 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Fam ily) USB UHCI #1 [8086:2658] (rev 03) 00:1d.1 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Fam ily) USB UHCI #2 [8086:2659] (rev 03) 00:1d.2 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Fam ily) USB UHCI #3 [8086:265a] (rev 03) 00:1d.3 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Fam ily) USB UHCI #4 [8086:265b] (rev 03) 00:1d.7 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Fam ily) USB2 UHCI Controller [8086:265c] (rev 03) 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI bridge [8086:244e] (rev d 3) 00:1e.2 Multimedia audio controller [0401]: Intel Corporation 82801FB/FBM/FR/FW/ FRW (ICH6 Family) AC'97 Autio conrtroller [8086:266e] (rev 03) 00:1f.0 ISA bridge [0601]: Intel Corporation 82801FB/RF (ICH6/ICH6R) LPC Interfa ce Bridge [8086:2640] (rev 03) 00:1f.1 IDE interface [0101]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 fami ly) IDE Controller [8086:266f] (rev 03) 00:1f.2 IDE interface [0101]: Intel Corporation 82801FB/FW (ICH6/ICH6W) SATA Con troller [8086:2651] (rev 03) 40:00.0 Ethernet controller [0200]: Broadcom Corporation NetXreme BCM5751 Gigab it Ethernet PCI Express [14e4:1677} (rev 01) Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Linux bob-desktop 3.2.0-23-generic-pae #36-Ubuntu SMP Tpr 10 22:19:09 UTC 20 12 i686 i686 i386 GNU/Linux eth0 Link encap:Ethernet HWaddr 00:16:35:78:47:bb inet6 addr: fe80::216:35ff:47bb/64 Scope:link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2517 errors:0 dropped:0 overruns:0 frame:0 TX packets:164 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:164508 (164.5 KB) TX bytes: 40884 (40.0 KB) Interrupt:17 lo Link encap:Local loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:3290 errors:0 dropped:0 overruns:0 frame:0 TX packets:3290 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen: 0 RX bytes:267212 (267.2 KB) TX bytes: 267212 (267.2 KB) Kernel Ip routing table Destination Gateway Genmask Flags Metric Ref Use Iface ran this sudo dhclient eth0 no reply ran this ip addr 1: lo <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST ,MULTICAST ,UP ,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000 link/enter 00:16:35:78:47:BB brd ff:ff:ff:ff:ff:ff inet 169.254.7.172/16 brd 169.254.255.255 scope link eth0:avahi inet6 fe80::216:35ff:fe78:47bb/64 scope link valid_lft forever preferred_lft forever Help please.

  Read the article

• Can't connect to my own wifi network

  - by Nicolas

  I use ubuntu 12.04 on various differents laptops/netbooks on my home. I was able to connect to my own wifi network. But sometimes, I couldn't connect to my wifi network, it ask me for password again and again. After many tries (a lot of them), sometimes I can connect, but sometimes I can't. I have this problem with a Samsung netbook and with a HP laptop. Right now, I can't connect with the HP laptop. I'll be grateful for any help. Best regards, Nicolás

  Read the article

• Which computer side has more salary chance in future programmer , sys admin , network admin , web developer

  - by Name

  I want to know which computer field has more probability of getting high salary with experience in the following fields 1)Programmer c , c++ , java 2)Sys admin MIcrosoft . linux 3)Network admin (Cisco ccna ccnp 4)web developer Any more idea will be good i work as web developer for 3 years and stiing at 40K$. I have to find new job and still look like i don't have offer more than 50K. may be i have chosen the wrong path. My friend in network admin has started from 65K and with experince he is going the ccnp or ccie with more high packages. I may e wrong , please correct me

  Read the article

• Deny to administrators to change network configuration settings

  - by moronrats

  I need to provide admin rights to every user but the users should not able to change network configuration settings. For this I have enabled following policies in User Configuration\Administrative Templates\Network\Network connections Enable Windows 2000 network connection settings for administrators Prohibit access to properties of a LAN connection Prohibit access to properties of components a LAN connection Users (that exist in administrators) still can change the LAN properties. Are there any other solutions?

  Read the article

• Resetting network adapter?

  - by Quixo

  I'm running Ubuntu 12.04. I get a strong wireless signal throughout my house, and the wireless symbol in the upper-right-hand corner shows that it's connected. The problem is, occasionally I am unable to access the internet (still having a strong symbol). This happened with Windows 7, too, but running the network troubleshooter fixed it each time. It claimed to be "resetting the network adapter". So, what I need to know is: How do I replicate that process on Ubuntu? Thanks for your help!

  Read the article

• Updated Win XP to 7: network adapter driver problem

  - by jiri

  I updated Windows XP on my old laptop to Windows 7. After installing I tried to open internet connection but Win 7 says that it cannot find network adapter because of a missing driver. I tried to find network adapter from device manager but could not find one. My network connection was working fine on Win XP. What has happened, how to update my network adapter driver for Windows 7?

  Read the article

• Infiniband: a highperformance network fabric - Part I

  - by Karoly Vegh

  Introduction:At the OpenWorld this year I managed to chat with interesting people again - one of them answering Infiniband deepdive questions with ease by coffee turned out to be one of Oracle's IB engineers, Ted Kim, who actually actively participates in the Infiniband Trade Association and integrates Oracle solutions with this highspeed network. This is why I love attending OOW. He granted me an hour of his time to talk about IB. This post is mostly based on that tech interview.Start of the actual post: Traditionally datatransfer between servers and storage elements happens in networks with up to 10 gigabit/seconds or in SANs with up to 8 gbps fiberchannel connections. Happens. Well, data rather trickles through.But nowadays data amounts grow well over the TeraByte order of magnitude, and multisocket/multicore/multithread Servers hunger data that these transfer technologies just can't deliver fast enough, causing all CPUs of this world do one thing at the same speed - waiting for data. And once again, I/O is the bottleneck in computing. FC and Ethernet can't keep up. We have half-TB SSDs, dozens of TB RAM to store data to be modified in, but can't transfer it. Can't backup fast enough, can't replicate fast enough, can't synchronize fast enough, can't load fast enough. The bad news is, everyone is used to this, like back in the '80s everyone was used to start compile jobs and go for a coffee. Or on vacation. The good news is, there's an alternative. Not so-called "bleeding-edge" 8gbps, but (as of now) 56. Not layers of overhead, but low latency. And it is available now. It has been for a while, actually. Welcome to the world of Infiniband. Short history:Infiniband was born as a result of joint efforts of HPAQ, IBM, Intel, Sun and Microsoft. They planned to implement a next-generation I/O fabric, in the 90s. In the 2000s Infiniband (from now on: IB) was quite popular in the high-performance computing field, powering most of the top500 supercomputers. Then in the middle of the decade, Oracle realized its potential and used it as an interconnect backbone for the first Database Machine, the first Exadata. Since then, IB has been booming, Oracle utilizes and supports it in a large set of its HW products, it is the backbone of the famous Engineered Systems: Exadata, SPARC SuperCluster, Exalogic, OVCA and even the new DB backup/recovery box. You can also use it to make servers talk highspeed IP to eachother, or to a ZFS Storage Appliance. Following Oracle's lead, even IBM has jumped the wagon, and leverages IB in its PureFlex systems, their first InfiniBand Machines.IB Structural Overview: If you want to use IB in your servers, the first thing you will need is PCI cards, in IB terms Host Channel Adapters, or HCAs. Just like NICs for Ethernet, or HBAs for FC. In these you plug an IB cable, going to an IB switch providing connection to other IB HCAs. Of course you're going to need drivers for those in your OS. Yes, these are long-available for Solaris and Linux. Now, what protocols can you talk over IB? There's a range of choices. See, IB isn't accepting package loss like Ethernet does, and hence doesn't need to rely on TCP/IP as a workaround for resends. That is, you still can run IP over IB (IPoIB), and that is used in various cases for control functionality, but the datatransfer can run over more efficient protocols - like native IB. About PCI connectivity: IB cards, as you see are fast. They bring low latency, which is just as important as their bandwidth. Current IB cards run at 56 gbit/s. That is slightly more than double of the capacity of a PCI Gen2 slot (of ~25 gbit/s). And IB cards are equipped usually with two ports - that is, altogether you'd need 112 gbit/s PCI slots, to be able to utilize FDR IB cards in an active-active fashion. PCI Gen3 slots provide you with around ~50gbps. This is why the most IB cards are configured in an active-standby way if both ports are used. Once again the PCI slot is the bottleneck. Anyway, the new Oracle servers are equipped with Gen3 PCI slots, an the new IB HCAs support those too. Oracle utilizes the QDR HCAs, running at 40gbp/s brutto, which translates to a 32gbp/s net traffic due to the 10:8 signal-to-data information ratio. Consolidation techniques: Technology never stops to evolve. Mellanox is working on the 100 gbps (EDR) version already, which will be optical, since signal technology doesn't allow EDR to be copper. Also, I hear you say "100gbps? I will never use/need that much". Are you sure? Have you considered consolidation scenarios, where (for example with Oracle Virtual Network) you could consolidate your platform to a high densitiy virtualized solution providing many virtual 10gbps interfaces through that 100gbps? Technology never stops to evolve. I still remember when a 10mbps network was impressively fast. Back in those days, 16MB of RAM was a lot. Now we usually run servers with around 100.000 times more RAM. If network infrastrucure speends could grow as fast as main memory capacities, we'd have a different landscape now :) You can utilize SRIOV as well for consolidation. That is, if you run LDoms (aka Oracle VM Server for SPARC) you do not have to add physical IB cards to all your guest LDoms, and you do not need to run VIO devices through the hypervisor either (avoiding overhead). You can enable SRIOV on those IB cards, which practically virtualizes the PCI bus, and you can dedicate Physical- and Virtual Functions of the virtualized HCAs as native, physical HW devices to your guests. See Raghuram's excellent post explaining SRIOV. SRIOV for IB is supported since LDoms 3.1.  This post is getting lengthier, so I will rename it to Part I, and continue it in a second post. 

  Read the article

• RTL8188CU USB Network Adaptor on ubuntu 13.04

  - by Daniel B

  I have an RTL8188CU USB Network Adaptor. On Ubuntu 12.10 I had to download RTL8188C_8192C_USB_linux_v3.4.4_4749.20121105 because the built-in rtl8192cu driver did not work on the 64bit system (Tested fine on 32bit). Now I have upgraded to Ubuntu 13.04 and of cause the switch from kernel 3.4 to 3.8 broke the compatibility with the driver source. And (Like I suspected), the 64bit issue with rtl8192cu has still not been resolved. Since Realtek has not yet provided a new driver source, I have no working network on my computer (I use USB Tethering from my mobile at the moment). I tried downloading the Windows driver and set it up with ndiswrapper, but as soon as I activate the ndiswrapper module while having that driver installed, I get a kernel panic. Since I cannot be the only one using this USB Adaptor, I wanted to see if someone else might have found a solution to get something working? Someone might even have a solution as to why the built-in 64bit driver does not work?

  Read the article

• Aliased network interfaces and isc dhcp server

  - by Jonatan

  I have been banging my head on this for a long time now. There are many discussions on the net about this and similar problems, but none of the solutions seems to work for me. I have a Debian server with two ethernet network interfaces. One of them is connected to internet, while the other is connected to my LAN. The LAN network is 10.11.100.0 (netmask 255.255.255.0). We have some custom hardware that use network 10.4.1.0 (netmask 255.255.255.0) and we can't change that. But we need all hosts on 10.11.100.0 to be able to connect to devices on 10.4.1.0. So I added an alias for the LAN network interface so that the Debian server acts as a gateway between 10.11.100.0 and 10.4.1.0. But then the dhcp server stopped working. The log says: No subnet declaration for eth1:0 (no IPv4 addresses). ** Ignoring requests on eth1:0. If this is not what you want, please write a subnet declaration in your dhcpd.conf file for the network segment to which interface eth1:1 is attached. ** No subnet declaration for eth1:1 (no IPv4 addresses). ** Ignoring requests on eth1:1. If this is not what you want, please write a subnet declaration in your dhcpd.conf file for the network segment to which interface eth1:1 is attached. ** I had another server before, also running Debian but with the older dhcp3 server, and it worked without any problems. I've tried everything I can think of in dhcpd.conf etc, and I've also compared with the working configuration in the old server. The dhcp server need only handle devices on 10.11.100.0. Any hints? Here's all relevant config files: /etc/default/isc-dhcp-server INTERFACES="eth1" /etc/network/interfaces (I've left out eth0, that connects to the Internet, since there is no problem with that.) auto eth1:0 iface eth1:0 inet static address 10.11.100.202 netmask 255.255.255.0 auto eth1:1 iface eth1:1 inet static address 10.4.1.248 netmask 255.255.255.0 /etc/dhcp/dhcpd.conf ddns-update-style none; option domain-name "???.com"; option domain-name-servers ?.?.?.?; default-lease-time 86400; max-lease-time 604800; authorative; subnet 10.11.100.0 netmask 255.255.255.0 { option subnet-mask 255.255.255.0; pool { range 10.11.100.50 10.11.100.99; } option routers 10.11.100.102; } I have tried to add shared-network etc, but didn't manage to get that to work. I get the same error message no matter what...

  Read the article

• How to design network protocols

  - by dandroid

  As a programmer, you work on your software design skills. You learn about things such as modularity and reusability and how you can achieve them in code. There's plenty of literature on the subject and engineers talk about it all the time. What about if you want to design network protocols? How do you judge that protocol X is badly designed while Y is well designed? (eg. in programming you are often pointed out to a well-written piece of code in order to learn from it - what is the equivalent for network protocols?) For example, suppose I want to design a P2P protocol similar to BitTorrent or I want to make a better version of the Socks protocol. How would I go about doing a good job on this? Thanks!

  Read the article

• No wireless network recognized on a Dell Vostro 3560

  - by Itai

  I just installed Ubuntu 12.04 along with Windows 7 on the same laptop - Dell Vostro 3560. Now, on Windows 7 I can access to different wi-fi networks. However, when I am logging onto the Ubuntu section (after re-starting my laptop) - an error message appears: Disconnected - you are now offline When I take a look at my network menu (in the upper bar on the screen), I see that no network is found (and I have a few of them in the area. ). I tried to look around but really could not find a concrete practical solution to this specific problem, would appreciate any solution from anyone out there that had this problem and solved it.

  Read the article

• Cannot mount a CIFS network share on Ubuntu over VPN

  - by Aron Rotteveel

  I have setup u VPN connection to our Windows 2008 server at the office and it seems to work fine. For some reason, however, I still am not able to access the network shares over a VPN connection using my standard fstab entries. When I am physically connected to the network, it works fine, but now when trying this over VPN I get the following error: mount error(110): Connection timed out Refer to the mount.cifs(8) manual page (e.g. man mount.cifs) My /etc/fstab looks like this: //server2008/share /mnt/share cifs iocharset=utf8,credentials=/home/aron/.smbcredentials,uid=1000 0 0 As said, it works fine when physically connected, but over VPN it just wont work. Any help is appreciated.

  Read the article

• Setting primary internet connection and network on notebook

  - by Francois

  I have installed Ubuntu on a notebook that I have configured to connect to the internet using an Iburst USB modem. This works 100% after a bit of configuring. I now have a desktop pc that I have installed ubuntu on, and would like to connect the two with a router. I bought a router with wifi, and would like to connect my notebook to the other computer using wifi, while still keeping the internet working with the usb modem. The problem is that as soon as the wifi connect, the internet connection dies. Is there a way to force ubuntu to get internet access through the usb modem, but use wifi to connect to the network? I am pretty new to ubuntu so any help would be appreciated. I also have a samsung galaxy tab that I would like to connect to the internet through usb modem via the wifi, so is there also a way to share that internet connection with the other computers on the network? Thanks in advance.....

  Read the article

• What is the sysadmin's dream network printer? 6-8k pg/mo. Xerox, OkiData, Lexmark and HP are all fail

  - by Jacob

  How do I find out what printer brand and/or type doesn't suck? This information is hard to find and manufacturer's websites won't reveal any issues with certain printers. After 10 years of dealing with network shared printers, I can't say that I have been impressed with any of the printer brands I've seen. Brother's little laser MFPs have been close to ideal for low volume, but that is it, period. OkiData, Lexmark, HP, Xerox solid ink printers, they all sucked in one way or another. Currently I'm looking to replace a Xerox ColorQube 8570 because it fails to print on a regular basis. Sometimes it doesn't even boot VxWorks fully - it just hangs at 2% or whatever. I've used Xerox 8860MFPs and they sucked just as bad. I won't talk about ink jets here, that's most likely not what I'm looking for. We currently spend about $4k on paper and ink per year for this printer at up to 6-8k pages per month, letter, mostly black and white, low color usage. I want the printer to feed paper correctly, not crash and burn when a PDF isn't according to its taste (my favorite Xerox problem here) and with decent drivers for Windows and OS X. Print quality is not of the utmost importance but paper does get sent to customers.

  Read the article

• Enumerate the ALL SQL Server Instances in Network

  In this article I will teach you how to get names and all other information of sql server instances that are in network.

  Read the article

• slow speed transfering files to a local network device

  - by F. Ariel Jung

  I'm having troubles copying files from my pc(ubuntu 13.04 64 bits) to a Media Center(WDTV Live: with an SATA2 HDD attached) through the local network. the speed is to slow, it's up to 2.0 MB/s image: http://s11.postimg.org/g1nuai92b/Captura_de_pantalla_de_2013_06_24_07_46_55.png (I don't use image tag because it is a big image) my PC has a wifi network card Tp Link TL-WN951N and it is connected to a TP Link TL-WDR3500 router via wifi, and the WDTV Live is connected via LAN here is a iwconfig: eth0 no wireless extensions. lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:"TL-WDR3500" Mode:Managed Frequency:2.462 GHz Access Point: A0:F3:C1:6C:3B:F1 Bit Rate=39 Mb/s Tx-Power=20 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=62/70 Signal level=-48 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:33521 Invalid misc:2245290 Missed beacon:0 if more data is required I'll post it as needed. I can't figure this out, needed help. please

  Read the article

• Samba network sharing NTFS drives and root permissions from local drives

  - by Bill

  I'm able to share my internal 2ndry NTFS drives (sdb1,2 and 3) on the network with Windows computers now but even though Samba read/write is enabled, Windows network computers can only open files "read-only" and can't save files to the samba shared drives/folders. I try to set permissions in Ubuntu via folder and/or file properties even logged in root via Nautilus but all the samba shared folders and files are set as owner = root, accessible and does not allow me to change them to read/write, it just resets to root, accessible, in other words, I can't change permissions. I'm running Ubuntu 11.04 Gnome on an old Dell Dimension 2400. Also, in order to for me to copy or move any files from the Ubuntu drive to the sdb1,2 or 3 drives, I have to gksu nautilus. This consequently prevents me from copying .ISO files to my "Multisys" thumb drive too.

  Read the article

• Juju bootstrap fails to start network on local environment

  - by Amith KK

  I've followed the instructions at https://juju.ubuntu.com/CharmSchool and rebooted 5 times...... I cant seem to do a juju-bootstrap (local) This is the output: amith@amith-desktop:~$ juju bootstrap 2011-11-24 17:08:05,708 INFO Bootstrapping environment 'local' (type: local)... 2011-11-24 17:08:05,710 INFO Checking for required packages... 2011-11-24 17:08:06,593 INFO Starting networking... error: Failed to start network default error: internal error Child process (dnsmasq --strict-order --bind-interfaces --pid-file=/var/run/libvirt/network/default.pid --conf-file= --except-interface lo --listen-address 192.168.122.1 --dhcp-range 192.168.122.2,192.168.122.254 --dhcp-leasefile=/var/lib/libvirt/dnsmasq/default.leases --dhcp-lease-max=253 --dhcp-no-override) status unexpected: exit status 2 Command '['virsh', 'net-start', 'default']' returned non-zero exit status 1 2011-11-24 17:08:07,217 ERROR Command '['virsh', 'net-start', 'default']' returned non-zero exit status 1 Is there any fix at all?

  Read the article

• Changes to 'resolveconf' discarded when connecting to a new network

  - by sudheer

  I have upgraded to 12.10 from 12.04 recently and I am having issues with connecting to the Internet. I got an IP address and am able to ping other LAN IPs in the local network but I am unable to connect to the Internet and am even unable to ping www.google.com from a terminal. Somehow making changes in /etc/resolv.conf and restarting resolvconf service and rebooting works but I need to do this every time I connect to a new network. How do I make these changes permanent? Can someone suggest a solution to this issue?

  Read the article

• Oracle Technology Network @ Devoxx 2011

  - by oracletechnet

  As you would expect, Oracle Technology Network will be stirring the pot next week at Devoxx in Antwerp. Our own Tori Wieldt is attending with a full video crew and stable of expert guests at her disposal, and she needs some suggestions from you about what questions you want answered: The Oracle Technology Network (meaning me) will be at Devoxx next week doing interviews with Java experts. Do you have technical questions about Project Jigsaw, JavaFX or Java on MacOS? Take a look at the list below of experts and topics. Leave your questions as a comment on this blog and I'll do my best to include them. Most of the interviews happen Tuesday, so get you questions in quickly. Thanks! You can see the full list of guests/topics and post suggestions via comments at The Java Source blog.

  Read the article

• WiFi AdHoc Network: Unable to access peer by ip

  - by Pranav

  I've set up a WiFi AdHoc network in Maverick and selected the IPv4 settings as "Shared to other computers". On the client computer, I joined the network with the same SSID and set IPv4 method to Manual and I gave it an IP 10.42.43.2 (As on the first computer, the auto generated IP was 10.42.43.1). From either of the computers, I'm not able to access the other using the IP (in browser). Any idea why? (If I browse to 10.42.43.1 from the first computer, it works) Thanks!

  Read the article

• Unable to ping inside or outside network with default gateway 0.0.0.0

  - by agentroadkill

  I've been around here before and I could usually piece together everything to more or less get myself up and running, but this time I'm truly stumped. I'm trying to connect my new 14.04 install to a network, and I'm forced to be behind my college's router. Now I've tested the vary cable that is right now plugged into my Ubuntu box on a Windows, Mac OS X, and even my friend's Ubuntu 14.04 box, and they all connect no problem. I've been trying to track this down for about two days, but every time I get close to it, the bug jumps to some other piece of my connection. Anyway, as it sits ifconfig -a gives: eth2 Lninkencap:Ethernet HWaddr:00:1f:bc:08:31:1d inet addr:10.32.51.51 Bcast:10.32.51.155 Mask: 255.255.255.0 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 RX bytes:0 TX bytes:0 as well as the local loopback, but I'm assuming that is not an issue here. sudo dhclient -v eth2 returns: Listening on LPF/<hardware address of my integrated NIC, above> Sending on <same> Sending on Socket/fallback DHCPREQUEST of 10.32.51.51 on eth2 to 255.255.255.255 port 67 (xid=0x6f4a66ba) <two more lines of same> DHCPDISCOVER on eth2 to 255.255.255.255 port 67 interval 3 (xid=0x156f9fb4) <many more of above with varying intervals> No DHCPOFFERS received. Trying recorded lease 10.32.51.51 RTNETLINK answers: File exists bound: renewal in <large number> seconds If I then try ping 8.8.8.8, I get: connect: Network is unreachable /etc/resolv.conf only contains the two lines telling you not to edit it, while /etc/network/interfaces only has the loopback interface block in it. I've tried commenting out the "option rfc3442" line in /etc/dhcp/dhclient.conf which seemed to fix this issue for many people, as well as adding the line send vendor-class-indentifier "MSFT5.0" to dhclient.conf as well to tell the router I'm a windows box, in case they don't like Linux. Finally, route -n reveals: Destination Gateway Genmask Flags Metric Ref Use Iface 10.32.51.0 0.0.0.0 255.255.255.0 U 0 0 0 eth2 I would like to apologize in advance for the doubtless butchered text alignment, but I'm obviously typing this all by hand, reading from the terminal as I type commands. I'm hoping this is an interesting problem, and not something I blithely stumbled past in my (apparent) over-confidence. TIA! Quick addendum before posting: The activity light on the ethernet port are lit and one blinks during boot, but they rarely (and seemingly randomly) do so afterwards (both are dark) even while running dhclient in the foreground. When I had the Ubuntu box tethered to my MacBook earlier, I got what looked like a normal power/uplink blinking pattern, but was unable to ping one from the other.

  Read the article

• Ubuntu ver 14.04 Network discovery not showing up on windows 8 but on windows 7

  - by Schwabber

  I have an old PC that is now my new Ubuntu machine. Currently I was working on sharing a drive so that backups and streaming could take place. I have it set up perfectly on my windows 7 laptop (able to read and write to it). For some reason however my wife's windows 8 laptop is not showing up on the Ubuntu and vice versa. I turned on network discovery on the win8 machine, but that didn't help. Thanks in advance edit- I have my win7 and win8 in the same homegroup and both can see each other in the network. Also the workgroup is the same.

  Read the article

• How To Get a Better Wireless Signal and Reduce Wireless Network Interference

  - by Chris Hoffman

  Like all sufficiently advanced technologies, Wi-Fi can feel like magic. But Wi-Fi isn’t magic – it’s radio waves. A variety of things can interfere with these radio waves, making your wireless connection weaker and more unreliable. The main keys to improving your wireless network’s signal are positioning your router properly — taking obstructions into account — and reducing interference from other wireless networks and household appliances. Image Credit: John Taylor on Flickr How To Get a Better Wireless Signal and Reduce Wireless Network Interference How To Troubleshoot Internet Connection Problems 7 Ways To Free Up Hard Disk Space On Windows

  Read the article

• Divide a network into two subnets of equal size

  - by kylex

  I have been given the following IP 192.168.14.137/25 and asked to divide the network into 2. This is what I've come up with: The subnet mask is therefore 255.255.255.128 The network address is 192.168.14.128 There are a total of 128 available addresses (including the network address and broadcast address) To divide the network we create to subnets: 192.168.14.128/26 192.168.14.192/26 This will have a subnet mask of 255.255.255.192 Am I missing anything, or is this correct?

  Read the article

< Previous Page | 41 42 43 44 45 46 47 48 49 50 51 52  | Next Page >