Search Results

Search found 29354 results on 1175 pages for 'scala 2 10'.

Page 45/1175 | < Previous Page | 41 42 43 44 45 46 47 48 49 50 51 52  | Next Page >

• Airport Express chokes Wi-Fi for a few seconds, several times per hour. Any idea why?

  - by user13727

  I'm using a MacBookPro connected to an AiportExpress' Wi-FI network. Every once in a while, the Wi-Fi will choke up and either drop some packets, or lag horribly for several seconds. I'm losing hair over this because every time I chat on Skype, the call hangs randomly due to this problem. Any idea what's wrong? Some more details: two networks are set up: 2.4Ghz and 5Ghz, and the issue happens on both the network uses WPA2 Personal for security the Airport is in the same room with my computer the Airport is fairly new, bought this summer, model number off the back: A1392 tried connecting to a neighbours wifi to see if it's a problem with my computer, or interference. It's not, it doesn't happen on their network. tried resetting it several times tried changing channels manually Ping results are below, so you can see what I'm talking about. EDIT: 10.0.1.1 is the Airport's IP 64 bytes from 10.0.1.1: icmp_seq=1795 ttl=255 time=0.813 ms 64 bytes from 10.0.1.1: icmp_seq=1796 ttl=255 time=3.335 ms 64 bytes from 10.0.1.1: icmp_seq=1797 ttl=255 time=3.403 ms 64 bytes from 10.0.1.1: icmp_seq=1798 ttl=255 time=3.414 ms 64 bytes from 10.0.1.1: icmp_seq=1799 ttl=255 time=3.227 ms 64 bytes from 10.0.1.1: icmp_seq=1800 ttl=255 time=3.274 ms 64 bytes from 10.0.1.1: icmp_seq=1801 ttl=255 time=3.253 ms 64 bytes from 10.0.1.1: icmp_seq=1802 ttl=255 time=3.292 ms >>>> choke starts <<< 64 bytes from 10.0.1.1: icmp_seq=1803 ttl=255 time=53.977 ms 64 bytes from 10.0.1.1: icmp_seq=1804 ttl=255 time=35.049 ms 64 bytes from 10.0.1.1: icmp_seq=1805 ttl=255 time=19.820 ms >>>> choke ends <<< 64 bytes from 10.0.1.1: icmp_seq=1806 ttl=255 time=0.716 ms 64 bytes from 10.0.1.1: icmp_seq=1807 ttl=255 time=0.705 ms 64 bytes from 10.0.1.1: icmp_seq=1808 ttl=255 time=0.919 ms 64 bytes from 10.0.1.1: icmp_seq=1809 ttl=255 time=0.659 ms 64 bytes from 10.0.1.1: icmp_seq=1810 ttl=255 time=0.877 ms 64 bytes from 10.0.1.1: icmp_seq=1811 ttl=255 time=0.679 ms 64 bytes from 10.0.1.1: icmp_seq=1812 ttl=255 time=0.854 ms 64 bytes from 10.0.1.1: icmp_seq=1813 ttl=255 time=0.644 ms 64 bytes from 10.0.1.1: icmp_seq=1814 ttl=255 time=3.779 ms ... time passes .. 64 bytes from 10.0.1.1: icmp_seq=1599 ttl=255 time=0.674 ms 64 bytes from 10.0.1.1: icmp_seq=1600 ttl=255 time=0.930 ms 64 bytes from 10.0.1.1: icmp_seq=1601 ttl=255 time=0.665 ms 64 bytes from 10.0.1.1: icmp_seq=1602 ttl=255 time=1.085 ms Request timeout for icmp_seq 1603 Request timeout for icmp_seq 1604 64 bytes from 10.0.1.1: icmp_seq=1605 ttl=255 time=104.969 ms 64 bytes from 10.0.1.1: icmp_seq=1606 ttl=255 time=11.521 ms 64 bytes from 10.0.1.1: icmp_seq=1607 ttl=255 time=0.926 ms 64 bytes from 10.0.1.1: icmp_seq=1608 ttl=255 time=0.993 ms 64 bytes from 10.0.1.1: icmp_seq=1609 ttl=255 time=0.745 ms And the Signal-Noise ratio:

  Read the article

• networked storage for a research group, 10-100 TB

  - by Marc

  this is related to this post: http://serverfault.com/questions/80854/scalable-24-tb-nas-for-research-department but perhaps a little more general. Background: We're a research lab of around 10 people who do a lot of experiments that involve taking pictures at one of several lab setups and then analyzing it an one of several lab computers. Each experiment may produce 2 or 3 GB of data, and we are generating data at the rate of about 10 TB/year. Right now, we are storing the data on a 6-bay netgear readynas pro, but even with 2 TB drive, this only gives us 10 TB of storage. Also, right now we are not backing up at all. Our short term backup plan is to get a second readynas, put it in a different building and mirror the one drive onto the other. Obviously, this is somewhat non-ideal. Our options: 1) We can pay our university $400/ TB /year for "backed up" online storage. We trust them more than we trust us, but not a whole lot. 2) We can continue to buy small NASs and mirror them between offices. One limit, although stupid, is that we don't have an unlimited number of ethernet jacks. 3) We can try to implement our own data storage solution, which is why I'm asking you guys. One thing to consider is that we're a very transient population and none of us are network administration experts. I will probably be here only another year or so, and graduate students, who are here the longest, have a 5-6 year time scale. So nothing can require expert oversight. Our data transfer rates are low - most of the data will just sit on the server waiting for someone to look at it once or twice - so we don't need a really high speed system. Given these contraints, can someone recommend a fairly low-cost, scalable, more or less turn key shared data storage system with backup in a separate physical location. Does such a thing exist or should we just pay the university to take care of it for us? As a second question, our professor just got tenure and is putting together a budget. Here the goal is to ask for as much as you can and hope you get a fraction of it. So the same question, minus the low-cost. Without budget constraints, can you recommend a scalable turn-key backed up storage system. Thanks

  Read the article

• Mac OS X Server 10.6.6 "disables" CPU in VMware Fusion

  - by wjlafrance

  Hello! I installed Mac OS X Server 10.6.0 in VMWare Fusion the other night and it worked perfectly, until I ran Software Update. I upgraded to 10.6.6 through the combo updater, and now when I start the VM it says: "The CPU has been disabled by the guest operating system. You will need to power off or reset the virtual machine at this point." I've switched the operating system in the options to OS X Server 32bit, 64bit, and even to Windows 7, and nothing has worked. Does anyone have any ideas?

  Read the article

• Install flash player 10 without Adobe Download Manager

  - by Frank Meulenaar

  How do I get flash player 10 (on Firefox) without installing the Adobe Download Manager?

  Read the article

• how to install Mysql & tomcat on mac os x 10.5.8

  - by Divya Jyothi

  Hi can some one provide me how to install both om my mac osx 10.5.8 Hi can some one provide me how to install both om my mac osx 10.5.8 Ok this what I have done Downloaded MySQL version 5.5.22.dmg for Mac OS X 10.5 (x86, 64-bit) from http://dev.mysql.com/downloads/mysql/ Installed three files from it after mounting.... 1.MySQL -version.pkg installed it by double clicking on it 2.mysqlstartupitem.pkg installed it 3. MySql.prefpane - after installing it says it doesn't work on intel based Mac After that I have no idea whati need to start Regarding tomcat JAVA_HOME WAS the problem;(

  Read the article

• Upgrading Mac OS X 10.5.8 Corrupted Lightroom 2.7

  - by Tedd

  I use Photoshop CS4 and Lightroom 2. I recntly upgraded to 10.5.8 and began to have issues with LR. So, I reinstalled and downgraded my OS. I'm now running 10.5.2 on my MacBook 2.4G Core Duo with 4G RAM. Everything works fine now, but the downgrade also resulted in having only Safari 3.0.4 and and older version of iTunes. I can't upgrade either of those until I upgrade the OS but I'm reluctant to do so because I might have problems again. Any suggestions? Install 10.6 instead? What kind of issues can I expect from that?

  Read the article

• Why appending to a list in Scala should have O(n) time complexity?

  - by Jubbat

  I am learning Scala at the moment and I just read that the execution time of the append operation for a list (:+) grows linearly with the size of the list. Appending to a list seems like a pretty common operation. Why should the idiomatic way to do this be prepending the components and then reversing the list? It can't also be a design failure as implementation could be changed at any point. From my point of view, both prepending and appending should be O(1). Is there any legitimate reason for this?

  Read the article

• 10 System LAN latency with ADSL modem as gateway

  - by itsoft3g

  Recently I expanded LAN in my office from 3 to 10 computers. Structure star topology, one ADSL Modem connected to One Switch which is again connected to 10 computers. Also we have Wifi device Netgear which is connected from switch. ADSL Modem acts as the DHCP Server, all the system will have default gateway IP (ADSL Modem's IP) Network latency is now become very high, All the chat severs disconnect often like google talk, skype etc, also internet become very very slow. when all the computer turned on. We have 4 Mbps Download and 100 Kbps upload Net speed. Its look like ADSL Modem cannot able to handle all the connections. I tried to setup a system as default gateway which will connect to modem, not sure how to do this. Please advice on this.

  Read the article

• Google Chrome gets really slow on 10+ open tabs

  - by Anton

  For some time already I face a problem with Google Chrome. I really love this browser, but on Windows 7 on a pretty decent machine (i5, 4GB RAM) it gets REALLY slow when I open for instance 10 techcrunch.com pages. Once I do that it becomes virtually difficult to scroll through pages and the general responsiveness of the browser gets down. And if I open 20+ or 30+ tabs there is a good chance all of them will crash. Does anyone got an idea? This happens to me on several PCs with Windows 7 64bit. At 10 tabs there is 600-700MB memory used by Chrome. Two systems have the issue are both laptops with integrated graphics. One by Intel, the other an nVidia GeForce 310M.

  Read the article

• cisco asa query dns external

  - by Alpacino

  my lab network asa firewall below 10.10.10.20 -- ASA --- 192.168.1.10 -- website external my client 10.10.10.20 want to access website external and i create nat nat (inside,outside) static 192.168.1.10 and access list access-list outside-acl extended permit tcp any host 10.10.10.20 eq www access-list outside-acl extended permit tcp any host 10.10.10.20 eq domain access-list inside-acl extended permit tcp 10.10.10.0 255.255.255.0 any eq www access-list inside-acl extended permit tcp 10.10.10.0 255.255.255.0 any eq domain access-group outside-acl in interface outside access-group inside-acl in interface inside when i access to website with domain name it can't access but i access website with ip address it work please help me to solve problem thank you

  Read the article

• Mac OS X Server 10.6.6 "disables" CPU in VMware Fusion

  - by wjlafrance

  I installed Mac OS X Server 10.6.0 in VMWare Fusion the other night and it worked perfectly, until I ran Software Update. I upgraded to 10.6.6 through the combo updater, and now when I start the VM it says: "The CPU has been disabled by the guest operating system. You will need to power off or reset the virtual machine at this point." I've switched the operating system in the options to OS X Server 32bit, 64bit, and even to Windows 7, and nothing has worked. Does anyone have any ideas?

  Read the article

• Use both OpenVPN & eth0 together

  - by shadyabhi

  I connect to a VPN using openVPN. Now, after the connection is established, all my traffic goes through tun0. My LAN gateway is 10.100.98.4... So, for apps to use my direct internet connnection I did sudo route add default gw 10.100.98.4 But, I cant use tun0 now. I know this because curl --interface tun0 google.com doesnt give me anything.. How do I go about using both connections simultaneously. How can I achieve that? ROUTING TABLES:- Without VPN running:- Destination Gateway Genmask Flags Metric Ref Use Iface 10.100.98.0 * 255.255.255.0 U 1 0 0 eth0 default 10.100.98.4 0.0.0.0 UG 0 0 0 eth0 With VPN:- Destination Gateway Genmask Flags Metric Ref Use Iface 10.10.0.1 10.10.54.230 255.255.255.255 UGH 0 0 0 tun0 10.10.54.230 * 255.255.255.255 UH 0 0 0 tun0 free-vpn.torvpn 10.100.98.4 255.255.255.255 UGH 0 0 0 eth0 10.100.98.0 * 255.255.255.0 U 1 0 0 eth0 default 10.10.54.230 0.0.0.0 UG 0 0 0 tun0 After the route command- Destination Gateway Genmask Flags Metric Ref Use Iface 10.10.0.1 10.10.54.230 255.255.255.255 UGH 0 0 0 tun0 10.10.54.230 * 255.255.255.255 UH 0 0 0 tun0 free-vpn.torvpn 10.100.98.4 255.255.255.255 UGH 0 0 0 eth0 10.100.98.0 * 255.255.255.0 U 1 0 0 eth0 default 10.100.98.4 0.0.0.0 UG 0 0 0 eth0 default 10.10.54.230 0.0.0.0 UG 0 0 0 tun0

  Read the article

• Network Table assistance

  - by mitchnufc

  I am designing a small network and have came up with the following table I am just wondering if this seems right, would appreciate some feedback, thanks. Network/Router First IP Last IP Subnet Host Broadcast Router 1 162.10.0.1 162.10.0.7 255.255.255.248 162.10.0.0 162.10.0.8 Network 1 162.10.1.1 162.10.2.253 255.255.254.0 162.10.1.0 162.10.2.254 Network 2 162.10.0.9 162.10.0.14 255.255.255.248 162.10.0.8 162.10.0.15 Router 2 162.10.0.17 162.10.0.18 255.255.255.252 162.10.0.16 162.10.0.19 Network 3 162.10.0.21 162.10.0.146 255.255.255.128 162.10.0.20 162.10.0.147 Router one is the IP assigned by the ISP

  Read the article

• Mac OS X Server 10.6.6 "disables" CPU in VMware Fusion [closed]

  - by wjlafrance

  Hello! I installed Mac OS X Server 10.6.0 in VMWare Fusion the other night and it worked perfectly, until I ran Software Update. I upgraded to 10.6.6 through the combo updater, and now when I start the VM it says: "The CPU has been disabled by the guest operating system. You will need to power off or reset the virtual machine at this point." I've switched the operating system in the options to OS X Server 32bit, 64bit, and even to Windows 7, and nothing has worked. Does anyone have any ideas?

  Read the article

• dynamically create class in scala, should I use interpreter?

  - by Phil

  Hi, I want to create a class at run-time in Scala. For now, just consider a simple case where I want to make the equivalent of a java bean with some attributes, I only know these attributes at run time. How can I create the scala class? I am willing to create from scala source file if there is a way to compile it and load it at run time, I may want to as I sometimes have some complex function I want to add to the class. How can I do it? I worry that the scala interpreter which I read about is sandboxing the interpreted code that it loads so that it won't be available to the general application hosting the interpreter? If this is the case, then I wouldn't be able to use the dynamically loaded scala class. Anyway, the question is, how can I dynamically create a scala class at run time and use it in my application, best case is to load it from a scala source file at run time, something like interpreterSource("file.scala") and its loaded into my current runtime, second best case is some creation by calling methods ie. createClass(...) to create it at runtime. Thanks, Phil

  Read the article

• JSP or .ascx equivalent for Scala?

  - by Daniel Worthington

  I'm working on a small MVC "framework" (it's really very small) in Scala. I'd like to be able to write my view files as Scala code so I can get lots of help from the compiler. Pre-compiling is great, but what I really want is a way to have the servlet container automatically compile certain files (my view files) on request so I don't have to shut down Jetty and compile all my source files at once, then start it up again just to see small changes to my HTML. I do this a lot with .ascx files in .NET (the file will contain just one scriptlet tag with a bunch of C# code inside which writes out markup using an XmlWriter) and I love this workflow. You just make changes and then refresh your browser, but it's still getting compiled! I don't have a lot of experience with Java, but it seems possible to do this with JSP as well. I'm wondering if this sort of thing is possible in Scala. I have looked into building this myself (see more info here: http://www.nabble.com/Compiler-API-td12050645.html) but I would rather use something else if it's out there.

  Read the article

• Project Euler 7 Scala Problem

  - by Nishu

  I was trying to solve Project Euler problem number 7 using scala 2.8 First solution implemented by me takes ~8 seconds def problem_7:Int = { var num = 17; var primes = new ArrayBuffer[Int](); primes += 2 primes += 3 primes += 5 primes += 7 primes += 11 primes += 13 while (primes.size < 10001){ if (isPrime(num, primes)) primes += num if (isPrime(num+2, primes)) primes += num+2 num += 6 } return primes.last; } def isPrime(num:Int, primes:ArrayBuffer[Int]):Boolean = { // if n == 2 return false; // if n == 3 return false; var r = Math.sqrt(num) for (i <- primes){ if(i <= r ){ if (num % i == 0) return false; } } return true; } Later I tried the same problem without storing prime numbers in array buffer. This take .118 seconds. def problem_7_alt:Int = { var limit = 10001; var count = 6; var num:Int = 17; while(count < limit){ if (isPrime2(num)) count += 1; if (isPrime2(num+2)) count += 1; num += 6; } return num; } def isPrime2(n:Int):Boolean = { // if n == 2 return false; // if n == 3 return false; var r = Math.sqrt(n) var f = 5; while (f <= r){ if (n % f == 0) { return false; } else if (n % (f+2) == 0) { return false; } f += 6; } return true; } I tried using various mutable array/list implementations in Scala but was not able to make solution one faster. I do not think that storing Int in a array of size 10001 can make program slow. Is there some better way to use lists/arrays in scala?

  Read the article

• Groovy / Scala / Java under the hood

  - by Jack

  I used Java for like 6-7 years, then some months ago I discovered Groovy and started to save a lot of typing.. then I wondered how certain things worked under the hood (because groovy performance is really poor) and understood that to give you dynamic typing every Groovy object is a MetaClass object that handles all the things that the JVM couldn't handle by itself. Of course this introduces a layer in the middle between what you write and what you execute that slows down everything. Then somedays ago I started getting some infos about Scala. How these two languages compare in their byte code translations? How much things they add to the normal structure that it would be obtained by plain Java code? I mean, Scala is static typed so wrapper of Java classes should be lighter, since many things are checked during compile time but I'm not sure about the real differences of what's going inside. (I'm not talking about the functional aspect of Scala compared to the other ones, that's a different thing) Can someone enlighten me? From WizardOfOdds it seems like that the only way to get less typing and same performance would be to write an intermediate translator that translates something in Java code (letting javac compile it) without alterating how things are executed, just adding synctatic sugar withour caring about other fallbacks of the language itself.

  Read the article

• Yet another Haskell vs. Scala question

  - by Travis Brown

  I've been using Haskell for several months, and I love it—it's gradually become my tool of choice for everything from one-off file renaming scripts to larger XML processing programs. I'm definitely still a beginner, but I'm starting to feel comfortable with the language and the basics of the theory behind it. I'm a lowly graduate student in the humanities, so I'm not under a lot of institutional or administrative pressure to use specific tools for my work. It would be convenient for me in many ways, however, to switch to Scala (or Clojure). Most of the NLP and machine learning libraries that I work with on a daily basis (and that I've written in the past) are Java-based, and the primary project I'm working for uses a Java application server. I've been mostly disappointed by my initial interactions with Scala. Many aspects of the syntax (partial application, for example) still feel clunky to me compared to Haskell, and I miss libraries like Parsec and HXT and QuickCheck. I'm familiar with the advantages of the JVM platform, so practical questions like this one don't really help me. What I'm looking for is a motivational argument for moving to Scala. What does it do (that Haskell doesn't) that's really cool? What makes it fun or challenging or life-changing? Why should I get excited about writing it?

  Read the article

• Different Scala Actor Implementations Overview

  - by Stefan K.

  I'm trying to find the 'right' actor implementation for my thesis. I realized there is a bunch of them and it's a bit confusing to pick one. Personally I'm especially interested in remote actors, but I guess a complete overview would be helpful to many others. This is a pretty general question, so feel free to answer just for the implementation you know about. I know about the following Scala Actor implementations (SAI). Please add the missing ones. Scala 2.7 (difference to) Scala 2.8 Akka (http://www.akkasource.org/) Lift (http://liftweb.net/) Scalaz (http://code.google.com/p/scalaz/) What are the target use-cases for these SAIs (lightweight vs. "heavy" enterprise framework)? do they support remote actors? What shortcomings do remote actors have in the SAIs? How is their performace? How active is there community? How easy are they to get started? How good is the documentation? How easy are they to extend? How stable are they? Which projects are using them? What are their shortcomings? What are their design principles? Are they thread based or event based (receive/ react) or both? Nested receiveS hotswapping the Actor’s message loop

  Read the article

• Scala newbie vproducer/consumer attempt running out of memory

  - by Nick

  I am trying to create a producer/consumer type Scala app. The LoopControl just sends a message to the MessageReceiver continually. The MessageReceiver then delegates work to the MessageCreatorActor (whose work is to check a map for an object, and if not found create one and start it up). Each MessageActor created by this MessageCreatorActor is associated with an Id. Eventually this is where I want to do business logic. But I run out of memory after 15 minutes. Its finding the cached actors,but quickly runs out of memory. Any help is appreciated. Or any one has any good code on producers consumers doing real stuff (not just adding numbers), please post. import scala.actors.Actor import java.util.HashMap import scala.actors.Actor._ case object LoopControl case object MessageReceiver case object MessageActor case object MessageActorCreator class MessageReceiver(msg: String) extends Actor { var messageActorMap = new HashMap[String, MessageActor] val messageCreatorActor = new MessageActorCreator(null, null) def act() { messageCreatorActor.start loop { react { case MessageActor(messageId) => if (msg.length() > 0) { var messageActor = messageActorMap.get(messageId); if(messageActor == null) { messageCreatorActor ! MessageActorCreator(messageId, messageActorMap) }else { messageActor ! MessageActor } } } } } } case class MessageActorCreator(msg:String, messageActorMap: HashMap[String, MessageActor]) extends Actor { def act() { loop { react { case MessageActorCreator(messageId, messageActorMap) => if(messageId != null ) { var messageActor = new MessageActor(messageId); messageActorMap.put(messageId, messageActor) println(messageActorMap) messageActor.start messageActor ! MessageActor } } } } } class LoopControl(messageReceiver:MessageReceiver) extends Actor { var count : Int = 0; def act() { while (true) { messageReceiver ! MessageActor ("00-122-0X95-FEC0" + count) //Thread.sleep(100) count = count +1; if(count > 5) { count = 0; } } } } case class MessageActor(msg: String) extends Actor { def act() { loop { react { case MessageActor => println() println("MessageActor: Got something-> " + msg) } } } } object messages extends Application { val messageReceiver = new MessageReceiver("bootstrap") val loopControl = new LoopControl(messageReceiver) messageReceiver.start loopControl.start }

  Read the article

• Scala downwards or decreasing for loop?

  - by Felix

  In scala, you often use an iterator to do a for loop in an increasing order like: for(i <- 1 to 10){ code } How would you do it so it goes from 10 to 1? I guess 10 to 1 gives an empty iterator (like usual range mathematics)? I made a scala script which solves it by calling reverse on the iterator, but it's not nice in my opinion, is this the way to go: def nBeers(n:Int) = n match { case 0 => ("No more bottles of beer on the wall, no more bottles of beer."+ "\nGo to the store and buy some more, "+ "99 bottles of beer on the wall.\n") case _ => (n+" bottles of beer on the wall, "+n +" bottles of beer.\n"+"Take one down and pass it around, "+ (if((n-1)==0) "no more" else (n-1))+ " bottles of beer on the wall.\n") } for(b <- (0 to 99).reverse)println(nBeers(b)) ?? Any comments/suggestions?

  Read the article

• Scala path dependent return type from parameter

  - by Rich Oliver

  In the following code using 2.10.0M3 in Eclipse plugin 2.1.0 for 2.10M3. I'm using the default setting which is targeting JVM 1.5 class GeomBase[T <: DTypes] { abstract class NewObjs { def newHex(gridR: GridBase, coodI: Cood): gridR.HexRT } class GridBase { selfGrid => type HexRT = HexG with T#HexTr def uniformRect (init: NewObjs) { val hexCood = Cood(2 ,2) val hex: HexRT = init.newHex(selfGrid, hexCood)// won't compile } } } Error message: Description Resource Path Location Type type mismatch; found: GeomBase.this.GridBase#HexG with T#HexTr required: GridBase.this.HexRT (which expands to) GridBase.this.HexG with T#HexTr GeomBase.scala Why does the compiler think the method returns the type projection GridBase#HexG when it should be this specific instance of GridBase? Edit transferred to a simpler code class in responce to comments now getting a different error message. package rStrat class TestClass { abstract class NewObjs { def newHex(gridR: GridBase): gridR.HexG } class GridBase { selfGrid => def uniformRect (init: NewObjs) { val hex: HexG = init.newHex(this) //error here } class HexG { val test12 = 5 } } } . Error line 11:Description Resource Path Location Type type mismatch; found : gridR.HexG required: GridBase.this.HexG possible cause: missing arguments for method or constructor TestClass.scala /SStrat/src/rStrat line 11 Scala Problem Update I've switched to 2.10.0M4 and updated the plug-in to the M4 version on a fresh version of Eclipse and switched to JVM 1.6 (and 1.7) but the problems are unchanged.

  Read the article

• Commenting out portions of code in Scala

  - by akauppi

  I am looking for a C(++) #if 0 -like way of being able to comment out whole pieces of Scala source code, for keeping around experimental or expired code for a while. I tried out a couple of alternatives and would like to hear what you use, and if you have come up with something better? // Simply block-marking N lines by '//' is one way... // <tags> """ anything My editor makes this easy, but it's not really The Thing. It gets easily mixed with actual one-line comments. Then I figured there's native XML support, so: <!-- ... did not work --> Wrapping in XML works, unless you have <tags> within the block: class none { val a= <ignore> ... cannot have //<tags> <here> (not even in end-of-line comments!) </ignore> } The same for multi-line strings seems kind of best, but there's an awful lot of boilerplate (not fashionable in Scala) to please the compiler (less if you're doing this within a class or an object): object none { val ignore= """ This seems like ... <truly> <anything goes> but three "'s of course """ } The 'right' way to do this might be: /*** /* ... works but not properly syntax highlighed in SubEthaEdit (or StackOverflow) */ ***/ ..but that matches the /* and */ only, not i.e. /*** to ***/. This means the comments within the block need to be balanced. And - the current Scala syntax highlighting mode for SubEthaEdit fails miserably on this. As a comparison, Lua has --[==[ matching ]==] and so forth. I think I'm spoilt? So - is there some useful trick I'm overseeing?

  Read the article

• File Access problems with SLES 10 SP2 OES2 SP1

  - by Blackhawk131

  We have identified a couple of repeatable, demonstrable scenarios with unexplained rejected folder access on our servers for Mac users. Hopefully, this can be presented to Novell for a solution. What we did to demonstrate scenario 1; 1. setup a PC and Mac side-by-side 2. login to our server and open up to a central location on both Mac and PC 3. on the PC in that central location create a folder 4. on the Mac in that central location drag the created folder to the Mac desktop, this should work fine, no problem 5. on the PC rename that folder 6. on the Mac drag a file to that renamed folder, this should error with the following message; a. You cannot copy some of these items to the destination because their names are too long for the destination. Do you want to skip copying these items and continue copying the other items? b. Select skip, response is the filename is copied to the location with zero or small byte size. Try opening it and you get file is corrupted error message. What we did to demonstrate scenario 2; 1. setup a PC and Mac side-by-side 2. login to our server and open up to a central location on both Mac and PC 3. on the PC in that central location create a folder then create a subfolder 4. copy some content into the subfolder 5. on the Mac in that central location drag the created top level folder to the Mac desktop, this should work fine, no problem 6. on the PC rename that subfolder 7. on the Mac drag that top level folder to the Mac desktop, this should error on the Mac with the following; a. The operation cannot be completed because you do not have sufficient privileges for b. The operation cannot be completed because you do not have sufficient privileges for 8. on the Mac, if you open that subfolder you can see the file copied in step 4 above but, you can not open that file, you get the following message if you try; a. There was an error opening this document. You do not have permission to open this file. 9. on the PC drag some content into the top level folder 10. on the Mac you can open that file directly from the server or copy it locally, no problem, however-the subfolder is still corrupted or locked, whichever 11. on the PC rename the top level folder 12. on the Mac that same file just opened in step 10 above is now not accessible, get the following message; a. The document could not be opened. I have observed some variances in the above. For instance, a change on the PC side may take a moment before you can observer or act on the Mac side - kind of like the server is slow to respond. Also, the error message may vary. However, the key is once a folder, or subfolder, gets renamed by a PC, Mac problems commence. The solution is to create a new folder from a PC and copy the contents of the corrupted folder to the new folder and not rename the folder name. This has to be done on a PC because the corrupted folder is not accessible by a Mac user. Another problem that dovetails with the above is that we know certain characters are not allowed for PC folder or filenames. If a Mac user creates a folder with a slash in the file name, from the PC the user does not see that slash in the name. As soon as the PC user copies a file to that folder, the Mac user is locked from that folder. Will get the following error message; - Sorry, the operation could not be completed because an unexpected error occurred. - (Error code - 50) In addition to the above mentioned character issue with folders, the problem is more evil with filenames. If, for example, you create a file with a slash in the filename on a Mac and copy it to the server you will get the following error message; - You cannot copy some of these items to the destination because their names are too long for the destination. Do you want to skip copying these items and continue copying the other items? Select either Stop or Skip buttons. It does not matter which button is selected. The file name gets copied to the destination location at a reduced size. Depending on the file type, the icon associated with the file may or may not be present. Furthermore, if you open that file on the server you will get the following message; - Couldnt open the file. It may be corrupt or a file format that doesnt recognize. From the users perspective, if they are not observant of the icon or file size, they may disregard the error message and think their file has copied as intended. Only later do they discover the file is corrupt if they open that file. I want to make a note on this problem. It is the PC causing the issue. You can change folder and file names all day on a MAC and you don't have a problem as long as a character is not the issue. Once you change the file name or folder name from a PC the entire folder structure from that level down is corrupted. But it has to be resolved from a PC by creating a new folder and copying the contents to the new folder like stated above. Is something not configured correctly? SUSE Linux Enterprise Server 10 (x86_64) VERSION = 10 PATCHLEVEL = 2 LSB_VERSION="core-2.0-noarch:core-3.0-noarch:core-2.0-x86_64:core-3.0-x86_64" Novell Open Enterprise Server 2.0.1 (x86_64) VERSION = 2.0.1 PATCHLEVEL = 1 BUILD Note: We use Novell clients on all windows systems to connect to the servers for file access and network storage. We use AFP to allow OSx systems to connect to servers.

  Read the article

< Previous Page | 41 42 43 44 45 46 47 48 49 50 51 52  | Next Page >