Search Results

Search found 1886 results on 76 pages for 'vendor neutrality'.

Page 45/76 | < Previous Page | 41 42 43 44 45 46 47 48 49 50 51 52  | Next Page >

  • How do I get a CardScan 60 II working with SANE?

    - by TiuTalk
    I have a CardScan 60 II device and installed SANE in my Ubuntu 10.10 laptop. The problem is I can't make scanimage find the device. Quote: $ sudo sane-find-scanner # sane-find-scanner will now attempt to detect your scanner. If the # result is different from what you expected, first make sure your # scanner is powered up and properly connected to your computer. # No SCSI scanners found. If you expected something different, make sure that # you have loaded a kernel SCSI driver for your SCSI adapter. found USB scanner (vendor=0x08f0 [Corex Technologies Corporation], product=0x1000 [Corex CardScan 60], chip=LM9832/3) at libusb:006:002 # Your USB scanner was (probably) detected. It may or may not be supported by # SANE. Try scanimage -L and read the backend's manpage. # Not checking for parallel port scanners. # Most Scanners connected to the parallel port or other proprietary ports # can't be detected by this program. But I can't find the device: $ sudo scanimage -L No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages).

    Read the article

  • Help find correct alsa model for onboard sound (alc887?) that will work with jack and have correct mixer setup

    - by Jazz
    I have a Gigabyte GA-MA74GMT-S2 motherboard. I am using Jack for sound - connected to ALSA. I am running Ubuntu 12.04. aplay -l reports card 0: SB [HDA ATI SB], device 0: ALC887 Analog [ALC887 Analog] The problem is that the default setup, that alsa decides to use, causes stuttering and xruns no matter how generous I set the frames/period or periods/buffer etc. Also, Jack works fine if I plug in an external USB sound system and use that. My processor is an AMD phenom x4 945, and I have 8GB ram, and Video card is Geforce GTX550 Ti, all of which should be quite capable enough. I also tried Pulseaudio and that works fine, but I need to use Jack At first I thought it might be an interrupt conflict, but I have found that adding "options snd-hda-intel model=generic" to /etc/modprobe.d/alsa-base.conf causes it to play correctly, but the limited mixer setup lacks controls I need - so this setup isn't good enough. Still, it seems to prove it isn't a hardware conflict. I have tried many other models, such as 3stack, 6stack, auto and even basic, and they all suffer from the stuttering. I eventually found "options snd-hda-intel model=3stack-6ch-intel" works without stuttering, and mixer is much closer to what it needs to be. Can anyone help on how to get a correct and accurate model for ALSA to use? More info on the hardware that might help... *-multimedia description: Audio device product: SBx00 Azalia (Intel HDA) vendor: Hynix Semiconductor (Hyundai Electronics) physical id: 14.2 bus info: pci@0000:00:14.2 version: 00 width: 64 bits clock: 33MHz capabilities: pm bus_master cap_list configuration: driver=snd_hda_intel latency=32 resources: irq:16 memory:fe024000-fe027fff

    Read the article

  • Windows Azure Virtual Machine Test Drive Kit

    - by Clint Edmonson
    The public preview of hosted Virtual Machines in Windows Azure is now available to the general public. This platform preview enables you to evaluate our new IaaS and Enterprise Networking capabilities. Once you have registered for the 90 Day Free Trial and created a new account, you can access the preview directly at this link: https://account.windowsazure.com/PreviewFeatures If you’ve been to any of my presentations lately, you’ll know that I’m fired up about these new offerings. As I’ve worked through some scenarios for myself and with my customers, I’ve been collecting the resources that helped me to ramp up. Here’s a collection of links to the items I’ve found most useful: Core Resources Digital Chalk Talk Videos – detailed technical overviews of the new Windows Azure services and supporting technologies as announced June 7, including Virtual Machines (IaaS Windows and Linux), Storage, Command Line Tools http://www.meetwindowsazure.com/DigitalChalkTalks Scenarios Videos on You Tube – “how to” guides, including “Create and Manage Virtual Networks”, “Create & Manage SQL Database”, and many more http://www.youtube.com/user/windowsazure Windows Azure Trust Center - provides a comprehensive of view of Windows Azure and security and compliance practices http://www.windowsazure.com/en-us/support/trust-center/ MSDN Forums for Windows Azure http://www.windowsazure.com/en-us/support/preview-support/ Microsoft Knowledge Base article Microsoft server software support for Windows Azure Virtual Machines Videos Deep Dive into Running Virtual Machines on Windows Azure Windows Azure Virtual Machines and Virtual Networks Windows Azure IaaS and How It Works Deep Dive into Windows Azure Virtual Machines: From the Cloud Vendor and Enterprise Perspective An Overview of Managing Applications, Services, and Virtual Machines in Windows Azure Monitoring and Managing Your Windows Azure Applications and Services Overview of Windows Azure Networking Features Hybrid Will Rule: Options to Connect, Extend and Integrate Applications in Your Data Center and Windows Azure Business Continuity in the Windows Azure Cloud Linux on Windows Azure Blogs Understanding Windows Azure Virtual Machines An Overview of Windows Azure Virtual Network Virtual Machines and Windows Running SQL Server in a Windows Azure Virtual Machine Support for Linux Virtual Machines on Windows Azure

    Read the article

  • links for 2010-05-03

    - by Bob Rhubart
    @ORACLENERD: Exadata + The Hartford Oracle ACE Chet "ORACLENERD" Justice went digging for information on Oracle Exadata, and shares the results. (tags: oracle otn oracleace hardware database exadata) @myfear: About the Java EE 6 Web Profile and the Future "If you look at the new web profile in more detail, you see that it is a specified minimal configuration targeted for small footprint servers that should support something called 'typical' web applications. It is thought of as a minimal specification, so a vendor is free to add additional services in their concrete implementation." -- Oracle ACE Director Markus Eisele (tags: oracle otn oracleace java) Edwin Biemond: WSM in FMW 11g Patch Set 2 and OSB 11g Oracle ACE Edwin Biemond of Whitehorses takes a look at the security aspects of Oracle Fusion Middleware and Oracle Service Bus 11g. (tags: oracle otn oracleace fusionmiddleware servicebus osb) James Taylor: Installing SOA Suite 11.1.1.3 James Taylor documents his attempt to implement a complete SOA Environment with SOA Suite, BPM and OSB on the WLS infrastructure. (tags: oracle otn soa soasuite fusionmiddleware) Eric Elzinga: Oracle Service Bus 11g Installation Eric Elzinga illustrates the Oracle Service Bus 11g installation process. (tags: otn oracle soa esb)

    Read the article

  • Web Essentials extension now available for Visual Studio Express

    - by ihaynes
    Originally posted on: http://geekswithblogs.net/ihaynes/archive/2014/08/12/web-essentials-extension-now-available-for-visual-studio-express.aspxVisual Studio Express has always had one big issue for me, the inability to install any (or very few) of the normal Visual Studio extensions. One of the best extensions for front-end development and design is the Web Essentials extension by Mads Kristensen on the VS team. It was a hugely welcome surprise to find that this extension is now available, in full, for VS Express, and had been since May, darn it! It has a huge number of useful features, not least being able to minify HTML, CSS and JavaScript files, which is almost a prerequisite for responsive sites. It can also bundle them together. There are lots of other features for HTML editing; intellisense and syntax highlighting for robots.txt files; 'surround with tag', intellisense for meta tags (including iOS, Twitter and Facebook); generate vendor-specific CSS etc etc. The full details can be found at the dedicated site. http://vswebessentials.com This extension alone makes VS Express far more useful and worth having.

    Read the article

  • How to Find Out Which Devices Are Supported By Solaris 11

    - by rickramsey
    Image of monks gathering on the steps of the main hall in the Tashilhunpo Monastery is courtesy of Alison Whitear Travel Photography. In his update of Brian Leonard's original Taking Your First Steps With Oracle Solaris, Glynn Foster walks you through the most basic steps required to get a version of Oracle Solaris 11 operational: Installing Solaris (VirtualBox, bare metal, or multi-boot) Managing users (root role, sudo command) Managing services with SMF (svcs and svcadm) Connecting to the network (with SMF or manually via dladm and ipadm) Figuring out the directory structure Updating software (with the IPS GUI or the pkg command) Managing package repositories Creating and managing additional boot environments One of the things you'll have to consider as you install Solaris 11 on an x86 system is whether Solaris has the proper drivers for the devices on your system. In the section titled "Installing On Bare Metal as a Standalone System," Glynn shows you how to use the Device Driver utility that's included with the Graphical Installer. However, if you want to get that information before you start installing Solaris 11 on your x86 system, you can consult the x86 Device List that's part of the Oracle Solaris Hardware Compatibility List (HCL). Here's how: Open the Device List. Scroll down to the table. Open the "Select Release" pull-down menu and pick "Solaris 11 11/11." Move over to the "Select Device Type" pull-down menu, and pick the device type. Or "All." The table will list all the devices of that type that are supported by Solaris 11, including PCI ID and vendor. In the coming days the Solaris Hardware Compatibility List will be updated with more Solaris 11 content. Stay tuned. - Rick Ramsey Website Newsletter Facebook Twitter

    Read the article

  • Wireless with WEP extremely slow on an Acer Timeline 4810T with a Centrino Wireless-N 1000

    - by noq38
    I've upgraded an Acer Timeline 4810T to Ubuntu 11.10. Everything works fine except for the darn wireless interface (network manager). I just tested the wireless interface over a non-encrypted signal and it works beautifully. The issue is definitely related to WEP. Unfortunately, some of the networks I need to connect to are WEP encrypted, therefore this is a serious issue for me that is preventing me from using Ubuntu on my laptop. This was no problem in 11.04 and prior. Is there a simple solution for this? Any suggestions? Here's more hardware information. Hopefully this helps to debug the network issue: sudo lshw -class network *-network description: Wireless interface product: Centrino Wireless-N 1000 vendor: Intel Corporation physical id: 0 bus info: pci@0000:02:00.0 logical name: wlan0 version: 00 serial: 00:1e:64:3c:5e:e0 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlagn driverversion=3.0.0-13-generic-pae firmware=39.31.5.1 build 35138 latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:43 memory:d2400000-d2401fff lspci 02:00.0 Network controller: Intel Corporation Centrino Wireless-N 1000 rfkill list 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no 1: acer-wireless: Wireless LAN Soft blocked: no Hard blocked: no Many thanks for your help! I just tested the wireless interface over a non-encrypted signal and it works beautifully. The issue is definitely related to WEP. Unfortunately, some of the networks I need to connect to are WEP encrypted, therefore this is a serious issue for me that is preventing me from using Ubuntu on my laptop. Any suggestions?

    Read the article

  • Issue 15: SVP Focus

    - by rituchhibber
         SVP FOCUS FOCUS -- Chris Baker SVP Oracle Worldwide ISV-OEM-Java Sales Chris Baker is the Global Head of ISV/OEM Sales responsible for working with ISV/OEM partners to maximise Oracle's business through those partners, whilst maximising those partners’ business to their end users. Chris works with partners, customers, innovators, investors and employees to develop innovative business solutions using Oracle products, services and skills. RESOURCES -- Oracle PartnerNetwork (OPN) OPN Solutions Catalog Oracle Exastack Program Oracle Exastack Optimized Oracle Cloud Computing Oracle Engineered Systems Oracle and Java SUBSCRIBE FEEDBACK PREVIOUS ISSUES "By taking part in marketing activities, our partners accelerate their sales cycles." -- Firstly, could you please explain Oracle's current strategy for ISV partners, globally and in EMEA? Oracle customers use independent software vendor (ISV) applications to run their businesses. They use them to generate revenue and to fulfil obligations to their own customers. Our strategy is very straight-forward. We want all of our ISV partners and OEMs to concentrate on the things that they do the best—building applications to meet the unique industry and functional requirements of their customer. We want to ensure that we deliver a best-in-class application platform so ISVs are free to concentrate their effort on their application functionality and user experience We invest over four billion dollars in research and development every year, and we want our ISVs to benefit from all of that investment in operating systems, virtualisation, databases, middleware, engineered systems, and other hardware. By doing this, we help them to reduce their costs, gain more consistency and agility for quicker implementations, and also rapidly differentiate themselves from other application vendors. It's all about simplification because we believe that around 25 to 30 percent of the development costs incurred by many ISVs are caused by customising infrastructure and have nothing to do with their applications. Our strategy is to enable our ISV partners to standardise their application platform using engineered architecture, so they can write once to the Oracle stack and deploy seamlessly in the cloud, on-premise, or in hybrid deployments. It's really important that architecture is the same in order to keep cost and time overheads at a minimum, so we provide standardisation and an environment that enables our ISVs to concentrate on the core business that makes them the most money and brings them success. How do you believe this strategy is helping the ISVs to work hand-in-hand with Oracle to ensure that end customers get the industry-leading solutions that they need? We work with our ISVs not just to help them be successful, but also to help them market themselves. We have something called the 'Oracle Exastack Ready Program', which enables ISVs to publicise themselves as 'Ready' to run the core software platforms that run on Oracle's engineered systems including Exadata and Exalogic. So, for example, they can become 'Database Ready' which means that they use the latest version of Oracle Database and therefore can run their application without modification on Exadata or the Oracle Database Appliance. Alternatively, they can become WebLogic Ready, Oracle Linux Ready and Oracle Solaris Ready which means they run on the latest release and therefore can run their application, with no new porting work, on Oracle Exalogic. Those 'Ready' logos are important in helping ISVs advertise to their customers that they are using the latest technologies which have been fully tested. We now also have Exadata Ready and Exalogic Ready programmes which allow ISVs to promote the certification of their applications on these platforms. This highlights these partners to Oracle customers as having solutions that run fluently on the Oracle Exadata Database Machine, the Oracle Exalogic Elastic Cloud or one of our other engineered systems. This makes it easy for customers to identify solutions and provides ISVs with an avenue to connect with Oracle customers who are rapidly adopting engineered systems. We have also taken this programme to the next level in the shape of 'Oracle Exastack Optimized' for partners whose applications run best on the Oracle stack and have invested the time to fully optimise application performance. We ensure that Exastack Optimized partner status is promoted and supported by press releases, and we help our ISVs go to market and differentiate themselves through the use of our technology and the standardisation it delivers. To date we have had several hundred organisations successfully work through our Exastack Optimized programme. How does Oracle's strategy of offering pre-integrated open platform software and hardware allow ISVs to bring their products to market more quickly? One of the problems for many ISVs is that they have to think very carefully about the technology on which their solutions will be deployed, particularly in the cloud or hosted environments. They have to think hard about how they secure these environments, whether the concern is, for example, middleware, identity management, or securing personal data. If they don't use the technology that we build-in to our products to help them to fulfil these roles, they then have to build it themselves. This takes time, requires testing, and must be maintained. By taking advantage of our technology, partners will now know that they have a standard platform. They will know that they can confidently talk about implementation being the same every time they do it. Very large ISV applications could once take a year or two to be implemented at an on-premise environment. But it wasn't just the configuration of the application that took the time, it was actually the infrastructure - the different hardware configurations, operating systems and configurations of databases and middleware. Now we strongly believe that it's all about standardisation and repeatability. It's about making sure that our partners can do it once and are then able to roll it out many different times using standard componentry. What actions would you recommend for existing ISV partners that are looking to do more business with Oracle and its customer base, not only to maximise benefits, but also to maximise partner relationships? My team, around the world and in the EMEA region, is available and ready to talk to any of our ISVs and to explore the possibilities together. We run programmes like 'Excite' and 'Insight' to help us to understand how we can help ISVs with architecture and widen their environments. But we also want to work with, and look at, new opportunities - for example, the Machine-to-Machine (M2M) market or 'The Internet of Things'. Over the next few years, many millions, indeed billions of devices will be collecting massive amounts of data and communicating it back to the central systems where ISVs will be running their applications. The only way that our partners will be able to provide a single vendor 'end-to-end' solution is to use Oracle integrated systems at the back end and Java on the 'smart' devices collecting the data—a complete solution from device to data centre. So there are huge opportunities to work closely with our ISVs, using Oracle's complete M2M platform, to provide the infrastructure that enables them to extract maximum value from the data collected. If any partners don't know where to start or who to contact, then they can contact me directly at [email protected] or indeed any of our teams across the EMEA region. We want to work with ISVs to help them to be as successful as they possibly can through simplification and speed to market, and we also want all of the top ISVs in the world based on Oracle. What opportunities are immediately opened to new ISV partners joining the OPN? As you know OPN is very, very important. New members will discover a huge amount of content that instantly becomes accessible to them. They can access a wealth of no-cost training and enablement materials to build their expertise in Oracle technology. They can download Oracle software and use it for development projects. They can help themselves become more competent by becoming part of a true community and uncovering new opportunities by working with Oracle and their peers in the Oracle Partner Network. As well as publishing massive amounts of information on OPN, we also hold our global Oracle OpenWorld event, at which partners play a huge role. This takes place at the end of September and the beginning of October in San Francisco. Attending ISV partners have an unrivalled opportunity to contribute to elements such as the OpenWorld / OPN Exchange, at which they can talk to other partners and really begin thinking about how they can move their businesses on and play key roles in a very large ecosystem which revolves around technology and standardisation. Finally, are there any other messages that you would like to share with the Oracle ISV community? The crucial message that I always like to reinforce is architecture, architecture and architecture! The key opportunities that ISVs have today revolve around standardising their architectures so that they can confidently think: "I will I be able to do exactly the same thing whenever a customer is looking to deploy on-premise, hosted or in the cloud". The right architecture is critical to being competitive and to really start changing the game. We want to help our ISV partners to do just that; to establish standard architecture and to seize the opportunities it opens up for them. New market opportunities like M2M are enormous - just look at how many devices are all around you right now. We can help our partners to interface with these devices more effectively while thinking about their entire ecosystem, rather than just the piece that they have traditionally focused upon. With standardised architecture, we can help people dramatically improve their speed, reach, agility and delivery of enhanced customer satisfaction and value all the way from the Java side to their centralised systems. All Oracle ISV partners must take advantage of these opportunities, which is why Oracle will continue to invest in and support them. Oracle OpenWorld 2010 Whether you attended Oracle OpenWorld 2009 or not, don't forget to save the date now for Oracle OpenWorld 2010. The event will be held a little earlier next year, from 19th-23rd September, so please don't miss out. With thousands of sessions and hundreds of exhibits and demos already lined up, there's no better place to learn how to optimise your existing systems, get an inside line on upcoming technology breakthroughs, and meet with your partner peers, Oracle strategists and even the developers responsible for the products and services that help you get better results for your end customers. Register Now for Oracle OpenWorld 2010! Perhaps you are interested in learning more about Oracle OpenWorld 2010, but don't wish to register at this time? Great! Please just enter your contact information here and we will contact you at a later date. How to Exhibit at Oracle OpenWorld 2010 Sponsorship Opportunities at Oracle OpenWorld 2010 Advertising Opportunities at Oracle OpenWorld 2010 -- Back to the welcome page

    Read the article

  • Someone using my website for Email and significant increase in spam

    - by Joy
    Let me give you the background in context so that you know the full story. Last summer my web guy (he put my website together) got in a fight with someone who attempted to register on my site using the name of my company as part of his user name. I was not aware of this at all until it had escalated dramatically. I don't know why my web guy was so unprofessional in his response to this person. I really don't know him - met him via SCORE and have never met in person. He is a vendor. Anyway, this guy who got into it with my web guy then threatened to do all he could to hurt my business and said he was internet savvy, etc. So, nothing seemed to happen for a while then not long ago this guy attempted to send me a friend request on Linkedin. After his behavior I declined it. Shortly afterwards I began seeing a dramatic increase in spammers posting comments on the blog part of my site. Just lately I have been receiving Emails from a variety of names but all with the "@___" that I own - for my business. I had additional security added so now they have to register in order to comment on my blog and I am seeing a lot of registration attempts from the same (and similar) IP addresses with bogus names and weird Email addresses being blocked. So, it is not creating more work as it is all automatic. The Email addresses are of more concern. Is there a way to identify a person through an IP address or a place to report the behavior or the Email usage? This guy lives in South Carolina so he is not overseas. Any help/advice you can provide will be greatly appreciated. Thanks Joy

    Read the article

  • Can't adjust backlight on an Nvidia 335m GT

    - by Vladimir
    I have a laptop mySN QMG6 / Chiligreen Mobilitas NW which is Quanta TW9 barebone with intel i3 and nvidia 335m GT onboard. On ubuntu distros 10.04, 10.10, 11.04 and 11.10 i had problem with changing screen backlight with nouveau and nvidia drivers. FN+F4/F5 buttons did not change my brightness. I tried to edit xorg.conf, adding Option “RegistryDwords” “EnableBrightnessControl=1? Also tried to add some lines to grub acpi_osi="Linux" acpi_backlight=vendor Neither worked for me. Today I installed Ubuntu 12.04 beta2 and... With nouveau driver my FN key works, and changes the brightness (is it a new 3.0.22 linux kernel, or patched nouveau driver, i don't know). This is a big step forward. But, when installing proprietary nvidia driver (295.33) FN button stops working and i can't change brightness. I also tried workaround with xorg and grub with no result. Tried to install acpi from apt - no result. Is there anything left to try? I really need that nvidia driver working with FN keys, as i would like to have a working 3D acceleration. P.S. Does the nouveau driver has 3d acceleration like nvidia drivers??? If there is need to provide some log data, please write what should i print, as i'm a bit new to Ubuntu. P.P.S. Same problems i had with other Linux distros (Mint, Fedora and others) P.P.P.S. Other FN buttons work with both drivers (Mute, VOL UP/DOWN, WiFi on/off, Bluetooth, Sleep, Start/Pause, Stop, Next/Prev song) Some new thoughts... CONFIG_BACKLIGHT_GENERIC=m could this be an issue? Made this by grep BACKLIGHT /boot/config-3.2.0-22-generic-pae Full grep output can be viewed here: http://pastebin.com/sMRd2Z4k

    Read the article

  • links for 2010-12-15

    - by Bob Rhubart
    Pravin Janardanam: Security in OBIEE 11g, Part 1 Guest blogger Pravin Janardanam kicks off a two-part series in which he tackles the differences in security between OBIEE 11g and 10g, and provides some hints on security migration from a 10g environment. (tags: oracle otn businessintelligence obiee) HttpClusterServlet Configuration (Weblogic Server Acting as a Proxy) Quick tips from Divay Dureja. (tags: oracle weblogic servlet configuration) Accelerating Deployment of Virtualized Infrastructures with the Oracle VM Blade Cluster Reference Configuration "The Oracle VM blade cluster reference configuration is a single-vendor solution that addresses every layer of the virtualization stack with Oracle hardware and software components." - from the white paper. (tags: oracle otn oraclevm virtualization) A SOA Safari (Antony Reynolds' Blog) SOA author Antony Reynolds shares links to some of his favorite SOA titles available for reading on Safari. (tags: oracle otn soa) Using Crossbow and Solaris 11 Express Zones for a single machine proof of concept environment with Puppet "My last blog entry was about my debugging experience with Puppet and promise to share the setup that I used. I now follow up that previous entry with this one which describes my Crossbow + NAT + S11 Zones proof of concept." - Michael Tin (tags: oracle solaris crossbow) @myfear: One thing you did not know about Java EE class loading in GlassFish 2.x "Be careful migrating apps from one app server to the other. And don't expect to have a strong hierarchical class loader in place. That is especially true for GF 2.x class loading." Oracle ACE Director Markus Eisele (tags: oracle otn oracleace java glassfish weblogic)

    Read the article

  • Atheros wireless not working

    - by Chandru1
    I have been struggling hard since i have installed Ubuntu 10.10 but it has been difficult for me to get my wifi working. So here is what i tried. First i checked whether i have the driver using the ifconfig command and it shows the wireless lan driver as wlan0. Next, i tried the command iwlist wlan0 scanning by becoming the root which gave me the output as no scan results. Next, i visited this link https://help.ubuntu.com/community/WifiDocs/Driver/Atheros to see as to what problem my laptop may have. I do own have an ath5k chipset. And as i followed the instructions in the above link in one of the blacklist-ath_pci.conf file had this written in it. For some Atheros 5K RF MACs, the madwifi driver loads buts fails to correctly initialize the hardware, leaving it in a state from which ath5k cannot recover. To prevent this condition, stop madwifi from loading by default. Use Jockey to select one driver or the other. (Ubuntu: #315056, #323830 I am not that good at Linux but i have given it a try. I am desperate to have my wifi working and i would be glad if this community could help. ADDED: If anyone would like to know as to what drivers i am using this is the output. network description: Wireless interface product: AR2413 802.11bg NIC vendor: Atheros Communications Inc. physical id: 3 bus info: pci@0000:0a:03.0 logical name: wlan0 version: 01 serial: 00:19:7d:d3:0c:fd width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath5k driverversion=2.6.35-24-generic firmware=N/A latency=168 link=no maxlatency=28 mingnt=10 multicast=yes wireless=IEEE 802.11bg resources: irq:18 memory:d0000000-d000ffff Some more information and output as to what i have done. lsmod | grep ath ath5k 130083 0 mac80211 231541 1 ath5k ath 8153 1 ath5k cfg80211 144470 3 ath5k,mac80211,ath led_class 2633 1 ath5k

    Read the article

  • Oracle on Oracle: Is that all?

    - by Darin Pendergraft
    On October 17th, I posted a short blog and a podcast interview with Chirag Andani, talking about how Oracle IT uses its own IDM products. Blog link here. In response, I received a comment from reader Jaime Cardoso ([email protected]) who posted: “- You could have talked about how by deploying Oracle's Open standards base technology you were able to integrate any new system in your infrastructure in days. - You could have talked about how by deploying federation you were enabling the business side to keep all their options open in terms of companies to buy and sell while maintaining perfect employee and customer's single view. - You could have talked about how you are now able to cut response times to your audit and security teams into 1/10th of your former times Instead you spent 6 minutes talking about single sign on and self provisioning? If I didn't knew your IDM offer so well I would now be wondering what its differences from Microsoft's offer was. Sorry for not giving a positive comment here but, please your IDM suite is very good and, you simply aren't promoting it well enough” So I decided to send Jaime a note asking him about his experience, and to get his perspective on what makes the Oracle products great. What I found out is that Jaime is a very experienced IDM Architect with several major projects under his belt. Darin Pendergraft: Can you tell me a bit about your experience? How long have you worked in IT, and what is your IDM experience? Jaime Cardoso: I started working in "serious" IT in 1998 when I became Netscape's technical specialist in Portugal. Netscape Portugal didn't exist so, I was working for their VAR here. Most of my work at the time was with Netscape's mail server and LDAP server. Since that time I've been bouncing between the system's side like Sun resellers, Solaris stuff and even worked with Sun's Engineering in the making of an Hierarchical Storage Product (Sun CIS if you know it) and the application's side, mostly in LDAP and IDM. Over the years I've been doing support, service delivery and pre-sales / architecture design of IDM solutions in most big customers in Portugal, to name a few projects: - The first European deployment of Sun Access Manager (SAPO – Portugal Telecom) - The identity repository of 5/5 of the Biggest Portuguese banks - The Portuguese government federation of services project DP: OK, in your blog response, you mentioned 3 topics: 1. Using Oracle's standards based architecture; (you) were able to integrate any new system in days: can you give an example? What systems, how long did it take, number of apps/users/accounts/roles etc. JC: It's relatively easy to design a user management strategy for a static environment, or if you simply assume that you're an <insert vendor here> shop and all your systems will bow to that vendor's will. We've all seen that path, the use of proprietary technologies in interoperability solutions but, then reality kicks in. As an ISP I recall that I made the technical decision to use Active Directory as a central authentication system for the entire IT infrastructure. Clients, systems, apps, everything was there. As a good part of the systems and apps were running on UNIX, then a connector became needed in order to have UNIX boxes to authenticate against AD. And, that strategy worked but, each new machine required the component to be installed, monitoring had to be made for that component and each new app had to be independently certified. A self care user portal was an ongoing project, AD access assumes the client is inside the domain, something the ISP's customers (and UNIX boxes) weren't nor had any intention of ever being. When the Windows 2008 rollout was done, Microsoft changed the Active Directory interface. The Windows administrators didn't have enough know-how about directories and the way systems outside the MS world behaved so, on the go live, things weren't properly tested and a general outage followed. Several hours and 1 roll back later, everything was back working. But, the ISP still had to change all of its applications to work with the new access methods and reset the effort spent on the self service user portal. To keep with the same strategy, they would also have to trust Microsoft not to change interfaces again. Simply by putting up an Oracle LDAP server in the middle and replicating the user info from the AD into LDAP, most of the problems went away. Even systems for which no AD connector existed had PAM in them so, integration was made at the OS level, fully supported by the OS supplier. Sun Identity Manager already had a self care portal, combined with a user workflow so, all the clearances had to be given before the account was created or updated. Adding a new system as a client for these authentication services was simply a new checkbox in the OS installer and, even True64 systems were, for the first time integrated also with a 5 minute work of a junior system admin. True, all the windows clients and MS apps still went to the AD for their authentication needs so, from the start everybody knew that they weren't 100% free of migration pains but, now they had a single point of problems to look at. If you're looking for numbers: - 500K directory entries (users) - 2-300 systems After the initial setup, I personally integrated about 20 systems / apps against LDAP in 1 day while being watched by the different IT teams. The internal IT staff did the rest. DP: 2. Using Federation allows the business to keep options open for buying and selling companies, and yet maintain a single view for both employee and customer. What do you mean by this? Can you give an example? JC: The market is dynamic. The company that's being bought today tomorrow will be sold again. Companies that spread on different markets may see the regulator forcing a sale of part of a company due to monopoly reasons and companies that are in multiple countries have to comply with different legislations. Our job, as IT architects, while addressing the customers and employees authentication services, is quite hard and, quite contrary. On one hand, we need to give access to all of our employees to the relevant systems, apps and resources and, we already have marketing talking with us trying to find out who's a customer of the bough company but not from ours to address. On the other hand, we have to do that and keep in mind we may have to break up all that effort and that different countries legislation may became a problem with a full integration plan. That's a job for user Federation. you don't want to be the one who's telling your President that he will sell that business unit without it's customer's database (making the deal worth a lot less) or that the buyer will take with him a copy of your entire customer's database. Federation enables you to start controlling permissions to users outside of your traditional authentication realm. So what if the people of that company you just bought are keeping their old logins? Do you want, because of that, to have a dedicated system for their expenses reports? And do you want to keep their sales (and pre-sales) people out of the loop in terms of your group's path? Control the information flow, establish a Federation trust circle and give access to your apps to users that haven't (yet?) been brought into your internal login systems. You can still see your users in a unified view, you obviously control if a user has access to any particular application, either that user is in your local database or stored in a directory on the other side of the world. DP: 3. Cut response times of audit and security teams to 1/10. Is this a real number? Can you give an example? JC: No, I don't have any backing for this number. One of the companies I did system Administration for has a SOX compliance policy in place (I remind you that I live in Portugal so, this definition of SOX may be somewhat different from what you're used to) and, every time the audit team says they'll do another audit, we have to negotiate with them the size of the sample and we spend about 15 man/days gathering all the required info they ask. I did some work with Sun's Identity auditor and, from what I've been seeing, Oracle's product is even better and, I've seen that most of the information they ask would have been provided in a few hours with the help of this tool. I do stand by what I said here but, to be honest, someone from Identity Auditor team would do a much better job than me explaining this time savings. Jaime is right: the Oracle IDM products have a lot of business value, and Oracle IT is using them for a lot more than I was able to cover in the short podcast that I posted. I want to thank Jaime for his comments and perspective. We want these blog posts to be informative and honest – so if you have feedback for the Oracle IDM team on any topic discussed here, please post your comments below.

    Read the article

  • WPA2 authentication fails on Ubuntu 12.04 using Rosewill RNX-N1

    - by user94156
    Decided to reduce the clutter in the house and replace a wired connection with a wireless one on my wife's system using USB network device Rosewill RNX-X1. I can see and connect to unprotected network, but WPA2 authentication repeatedly fails. RNX-X1 works on other systems (including TV); also have 2 of 'em and tried each. Worth noting that I recently switched from Comcast to CenturyLink and so switched routers. The system connected successfully to previous router (Linksys EA4500) using WPA2. Would think it is the router (Actiontec C1000A) but all other devices (TV, iPad, Windows, Blackberry, and Squeezebox) connect ok. Would appreciate some diagnostic guidance and insight (phrased for a newbie!) Tests to date: sudo lshw -class network *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 01 serial: 00:e0:4d:30:40:a1 size: 10Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=N/A latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:47 ioport:ac00(size=256) memory:fdcff000-fdcfffff memory:fdb00000-fdb1ffff *-network description: Wireless interface physical id: 1 bus info: usb@1:2 logical name: wlan1 serial: 00:02:6f:bd:30:a0 capabilities: ethernet physical wireless configuration: broadcast=yes driver=rt2800usb driverversion=3.2.0-31-generic firmware=0.29 link=no multicast=yes wireless=IEEE 802.11bgn sudo lspci -v 00:00.0 RAM memory: NVIDIA Corporation MCP67 Memory Controller (rev a2) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0 Capabilities: [44] HyperTransport: Slave or Primary Interface Capabilities: [dc] HyperTransport: MSI Mapping Enable+ Fixed- 00:01.0 ISA bridge: NVIDIA Corporation MCP67 ISA Bridge (rev a2) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0 00:01.1 SMBus: NVIDIA Corporation MCP67 SMBus (rev a2) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: 66MHz, fast devsel, IRQ 11 I/O ports at fc00 [size=64] I/O ports at 1c00 [size=64] I/O ports at 1c40 [size=64] Capabilities: [44] Power Management version 2 Kernel driver in use: nForce2_smbus Kernel modules: i2c-nforce2 00:01.2 RAM memory: NVIDIA Corporation MCP67 Memory Controller (rev a2) Flags: 66MHz, fast devsel 00:02.0 USB controller: NVIDIA Corporation MCP67 OHCI USB 1.1 Controller (rev a2) (prog-if 10 [OHCI]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23 Memory at fe02f000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Kernel driver in use: ohci_hcd 00:02.1 USB controller: NVIDIA Corporation MCP67 EHCI USB 2.0 Controller (rev a2) (prog-if 20 [EHCI]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22 Memory at fe02e000 (32-bit, non-prefetchable) [size=256] Capabilities: [44] Debug port: BAR=1 offset=0098 Capabilities: [80] Power Management version 2 Kernel driver in use: ehci_hcd 00:04.0 USB controller: NVIDIA Corporation MCP67 OHCI USB 1.1 Controller (rev a2) (prog-if 10 [OHCI]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21 Memory at fe02d000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Kernel driver in use: ohci_hcd 00:04.1 USB controller: NVIDIA Corporation MCP67 EHCI USB 2.0 Controller (rev a2) (prog-if 20 [EHCI]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20 Memory at fe02c000 (32-bit, non-prefetchable) [size=256] Capabilities: [44] Debug port: BAR=1 offset=0098 Capabilities: [80] Power Management version 2 Kernel driver in use: ehci_hcd 00:06.0 IDE interface: NVIDIA Corporation MCP67 IDE Controller (rev a1) (prog-if 8a [Master SecP PriP]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0 [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8] [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1] [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8] [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1] I/O ports at f000 [size=16] Capabilities: [44] Power Management version 2 Kernel driver in use: pata_amd Kernel modules: pata_amd 00:07.0 Audio device: NVIDIA Corporation MCP67 High Definition Audio (rev a1) Subsystem: Biostar Microtech Int'l Corp Device 820c Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22 Memory at fe024000 (32-bit, non-prefetchable) [size=16K] Capabilities: [44] Power Management version 2 Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+ Capabilities: [6c] HyperTransport: MSI Mapping Enable- Fixed+ Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 00:08.0 PCI bridge: NVIDIA Corporation MCP67 PCI Bridge (rev a2) (prog-if 01 [Subtractive decode]) Flags: bus master, 66MHz, fast devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: fdf00000-fdffffff Prefetchable memory behind bridge: fd000000-fd0fffff Capabilities: [b8] Subsystem: NVIDIA Corporation Device cb84 Capabilities: [8c] HyperTransport: MSI Mapping Enable- Fixed- 00:09.0 IDE interface: NVIDIA Corporation MCP67 AHCI Controller (rev a2) (prog-if 85 [Master SecO PriO]) Subsystem: Biostar Microtech Int'l Corp Device 5407 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23 I/O ports at 09f0 [size=8] I/O ports at 0bf0 [size=4] I/O ports at 0970 [size=8] I/O ports at 0b70 [size=4] I/O ports at dc00 [size=16] Memory at fe02a000 (32-bit, non-prefetchable) [size=8K] Capabilities: [44] Power Management version 2 Capabilities: [8c] SATA HBA v1.0 Capabilities: [b0] MSI: Enable- Count=1/8 Maskable- 64bit+ Capabilities: [cc] HyperTransport: MSI Mapping Enable- Fixed+ Kernel driver in use: ahci 00:0b.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000b000-0000bfff Memory behind bridge: fde00000-fdefffff Prefetchable memory behind bridge: 00000000fdd00000-00000000fddfffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:0c.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 0000a000-0000afff Memory behind bridge: fdc00000-fdcfffff Prefetchable memory behind bridge: 00000000fdb00000-00000000fdbfffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:0d.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 00009000-00009fff Memory behind bridge: fda00000-fdafffff Prefetchable memory behind bridge: 00000000fd900000-00000000fd9fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:0e.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 I/O behind bridge: 00008000-00008fff Memory behind bridge: fd800000-fd8fffff Prefetchable memory behind bridge: 00000000fd700000-00000000fd7fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:0f.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=06, subordinate=06, sec-latency=0 I/O behind bridge: 00007000-00007fff Memory behind bridge: fd600000-fd6fffff Prefetchable memory behind bridge: 00000000fd500000-00000000fd5fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:10.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=07, subordinate=07, sec-latency=0 I/O behind bridge: 00006000-00006fff Memory behind bridge: fd400000-fd4fffff Prefetchable memory behind bridge: 00000000fd300000-00000000fd3fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:11.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=08, subordinate=08, sec-latency=0 I/O behind bridge: 00005000-00005fff Memory behind bridge: fd200000-fd2fffff Prefetchable memory behind bridge: 00000000fd100000-00000000fd1fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:12.0 VGA compatible controller: NVIDIA Corporation C68 [GeForce 7050 PV / nForce 630a] (rev a2) (prog-if 00 [VGA controller]) Subsystem: Biostar Microtech Int'l Corp Device 1406 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21 Memory at fb000000 (32-bit, non-prefetchable) [size=16M] Memory at e0000000 (64-bit, prefetchable) [size=256M] Memory at fc000000 (64-bit, non-prefetchable) [size=16M] [virtual] Expansion ROM at 80000000 [disabled] [size=128K] Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+ Kernel driver in use: nvidia Kernel modules: nvidia_current, nouveau, nvidiafb 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration Flags: fast devsel Capabilities: [80] HyperTransport: Host or Secondary Interface 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map Flags: fast devsel 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller Flags: fast devsel 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control Flags: fast devsel Capabilities: [f0] Secure device <?> Kernel driver in use: k8temp Kernel modules: k8temp 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01) Subsystem: Biostar Microtech Int'l Corp Device 2305 Flags: bus master, fast devsel, latency 0, IRQ 47 I/O ports at ac00 [size=256] Memory at fdcff000 (64-bit, non-prefetchable) [size=4K] [virtual] Expansion ROM at fdb00000 [disabled] [size=128K] Capabilities: [40] Power Management version 2 Capabilities: [48] Vital Product Data Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] Express Endpoint, MSI 00 Capabilities: [84] Vendor Specific Information: Len=4c <?> Capabilities: [100] Advanced Error Reporting Capabilities: [12c] Virtual Channel Capabilities: [148] Device Serial Number 32-00-00-00-10-ec-81-68 Capabilities: [154] Power Budgeting <?> Kernel driver in use: r8169 Kernel modules: r8169 sudo rfkill list all 2: phy2: Wireless LAN Soft blocked: no Hard blocked: no

    Read the article

  • Screen becomes black after pressing dash or alt-tab

    - by cegerxwin
    I did an upgrade from 11.04 to 11.10. Unity 3d becomes a black screen after pressing the dash-button or after pressing alt-tab to switch between open windows. I can see the panel on the top(lock,sound,..) and the panel on the left (launcher) but the rest is black. It looks like a maximised black window. The open Windows are active but I cant see them. I logout by pressing logout in the right top corner and pressing enter (because logout is default focused on the dialogue screen) and leave unity3d. Unity3d worked with 11.04 very good. If I press the dash button the dash looks like an 16-Bit or 8-Bit window and buttons for maximise, minimise and close are displayed and looks inverted. I have rebooted my notebook just now and log in to Unity 3D and tested some features of Unity and everything works well. The black thing is only a layer. I can use my desktop but cant see anything because of the layer, but everything works. It seems so, that a layer appear when pressing dash or alt-tab and does not disappear when close dash or choose a running app with alt-tab. you will see the necessary info related video problems: Unity support: /usr/lib/nux/unity_support_test -p OpenGL vendor string: X.Org R300 Project OpenGL renderer string: Gallium 0.4 on ATI RC410 OpenGL version string: 2.1 Mesa 7.11-devel Not software rendered: yes Not blacklisted: yes GLX fbconfig: yes GLX texture from pixmap: yes GL npot or rect textures: yes GL vertex program: yes GL fragment program: yes GL vertex buffer object: yes GL framebuffer object: yes GL version is 1.4+: yes Unity 3D supported: yes xorg glxinfo lspci -nn | grep VGA 01:05.0 VGA compatible controller [0300]: ATI Technologies Inc RC410 [Radeon Xpress 200M] [1002:5a62]

    Read the article

  • Closed-loop Recommendation Engines: Analyst Insight report on Oracle Real-Time Decisions (RTD)

    - by Mike.Hallett(at)Oracle-BI&EPM
    In November 2011, Helena Schwenk of MWD Advisors, published her analysis on Oracle Real-Time Decisions.  She summarizes as follows: "In contrast to other popular approaches to implementing predictive analytics, RTD focuses on learning from each interaction and using these insights to adjust what is presented, offered or displayed to a customer. Likewise its capabilities for optimising decisions within the context of specific business goals and a report-driven framework for assessing the performance of models and decisions make it a strong contender for organisations that want to continuously improve decision making as part of a customer experience marketing, e-commerce optimisation and operational process efficiency initiative." This is an outstanding report to share with a prospect or client as it goes into great detail about the product and its capabilities.  It also highlights the differences in Oracle's Real-Time Decisions product vs. other closed loop recommendation engines. I encourage you to share this report with your clients and prospects. It can be downloaded directly from here - MWD Advisors Vendor Profile: Oracle Real-Time Decisions. (expires in November 2012) Highlights: "At the core of RTD lies a learning engine that combines business rules and adaptive predictive models to deliver recommendations to operational systems while simultaneously learning from experiences." "While closed-loop recommendation engines are becoming more prevalent... there are a number of features that distinguish RTD: It makes its decisions in the context of the business objectives, such as maximising customer revenue or reducing service costs Its support for operational integration offers organisations some flexibility in how they implement the offering."

    Read the article

  • Finding the Right Solution to Source and Manage Your Contractors

    - by mark.rosenberg(at)oracle.com
    Many of our PeopleSoft Enterprise applications customers operate in service-based industries, and all of our customers have at least some internal service units, such as IT, marketing, and facilities. Employing the services of contractors, often referred to as "contingent labor," to deliver either or both internal and external services is common practice. As we've transitioned from an industrial age to a knowledge age, talent has become a primary competitive advantage for most organizations. Contingent labor offers talent on flexible terms; it offers the ability to scale up operations, close skill gaps, and manage risk in the process of delivering services. Talent comes from many sources and the rise in the contingent worker (contractor, consultant, temporary, part time) has increased significantly in the past decade and is expected to reach 40 percent in the next decade. Managing the total pool of talent in a seamless integrated fashion not only saves organizations money and increases efficiency, but creates a better place for workers of all kinds to work. Although the term "contingent labor" is frequently used to describe both contractors and employees who have flexible schedules and relationships with an organization, the remainder of this discussion focuses on contractors. The term "contingent labor" is used interchangeably with "contractor." Recognizing the importance of contingent labor, our PeopleSoft customers often ask our team, "What Oracle vendor management system (VMS) applications should I evaluate for managing contractors?" In response, I thought it would be useful to describe and compare the three most common Oracle-based options available to our customers. They are:   The enterprise licensed software model in which you implement and utilize the PeopleSoft Services Procurement (sPro) application and potentially other PeopleSoft applications;  The software-as-a-service model in which you gain access to a derivative of PeopleSoft sPro from an Oracle Business Process Outsourcing Partner; and  The managed service provider (MSP) model in which staffing industry professionals utilize either your enterprise licensed software or the software-as-a-service application to administer your contingent labor program. At this point, you may be asking yourself, "Why three options?" The answer is that since there is no "one size fits all" in terms of talent, there is also no "one size fits all" for effectively sourcing and managing contingent workers. Various factors influence how an organization thinks about and relates to its contractors, and each of the three Oracle-based options addresses an organization's needs and preferences differently. For the purposes of this discussion, I will describe the options with respect to (A) pricing and software provisioning models; (B) control and flexibility; (C) level of engagement with contractors; and (D) approach to sourcing, employment law, and financial settlement. Option 1:  Enterprise Licensed Software In this model, you purchase from Oracle the license and support for the applications you need. Typically, you license PeopleSoft sPro as your VMS tool for sourcing, monitoring, and paying your contract labor. In conjunction with sPro, you can also utilize PeopleSoft Human Capital Management (HCM) applications (if you do not already) to configure more advanced business processes for recruiting, training, and tracking your contractors. Many customers choose this enterprise license software model because of the functionality and natural integration of the PeopleSoft applications and because the cost for the PeopleSoft software is explicit. There is no fee per transaction to source each contractor under this model. Our customers that employ contractors to augment their permanent staff on billable client engagements often find this model appealing because there are no fees to affect their profit margins. With this model, you decide whether to have your own IT organization run the software or have the software hosted and managed by either Oracle or another application services provider. Your organization, perhaps with the assistance of consultants, configures, deploys, and operates the software for managing your contingent workforce. This model offers you the highest level of control and flexibility since your organization can configure the contractor process flow exactly to your business and security requirements and can extend the functionality with PeopleTools. This option has proven very valuable and applicable to our customers engaged in government contracting because their contingent labor management practices are subject to complex standards and regulations. Customers find a great deal of value in the application functionality and configurability the enterprise licensed software offers for managing contingent labor. Some examples of that functionality are... The ability to create a tiered network of preferred suppliers including competencies, pricing agreements, and elaborate candidate management capabilities. Configurable alerts and online collaboration for bid, resource requisition, timesheet, and deliverable entry, routing, and approval for both resource and deliverable-based services. The ability to manage contractors with the same PeopleSoft HCM and Projects applications that are used to manage the permanent workforce. Because it allows you to utilize much of the same PeopleSoft HCM and Projects application functionality for contractors that you use for permanent employees, the enterprise licensed software model supports the deepest level of engagement with the contingent workforce. For example, you can: fill job openings with contingent labor; guide contingent workers through essential safety and compliance training with PeopleSoft Enterprise Learning Management; and source contingent workers directly to project-based assignments in PeopleSoft Resource Management and PeopleSoft Program Management. This option enables contingent workers to collaborate closely with your permanent staff on complex, knowledge-based efforts - R&D projects, billable client contracts, architecture and engineering projects spanning multiple years, and so on. With the enterprise licensed software model, your organization maintains responsibility for the sourcing, onboarding (including adherence to employment laws), and financial settlement processes. This means your organization maintains on staff or hires the expertise in these domains to utilize the software and interact with suppliers and contractors. Option 2:  Software as a Service (SaaS) The effort involved in setting up and operating VMS software to handle a contingent workforce leads many organizations to seek a system that can be activated and configured within a few days and for which they can pay based on usage. Oracle's Business Process Outsourcing partner, Provade, Inc., provides exactly this option to our customers. Provade offers its vendor management software as a service over the Internet and usually charges your organization a fee that is a percentage of your total contingent labor spending processed through the Provade software. (Percentage of spend is the predominant fee model, although not the only one.) In addition to lower implementation costs, the effort of configuring and maintaining the software is largely upon Provade, not your organization. This can be very appealing to IT organizations that are thinly stretched supporting other important information technology initiatives. Built upon PeopleSoft sPro, the Provade solution is tailored for simple and quick deployment and administration. Provade has added capabilities to clone users rapidly and has simplified business documents, like work orders and change orders, to facilitate enterprise-wide, self-service adoption with little to no training. Provade also leverages Oracle Business Intelligence Enterprise Edition (OBIEE) to provide integrated spend analytics and dashboards. Although pure customization is more limited than with the enterprise licensed software model, Provade offers a very effective option for organizations that are regularly on-boarding and off-boarding high volumes of contingent staff hired to perform discrete support tasks (for example, order fulfillment during the holiday season, hourly clerical work, desktop technology repairs, and so on) or project tasks. The software is very configurable and at the same time very intuitive to even the most computer-phobic users. The level of contingent worker engagement your organization can achieve with the Provade option is generally the same as with the enterprise licensed software model since Provade can automatically establish contingent labor resources in your PeopleSoft applications. Provade has pre-built integrations to Oracle's PeopleSoft and the Oracle E-Business Suite procurement, projects, payables, and HCM applications, so that you can evaluate, train, assign, and track contingent workers like your permanent employees. Similar to the enterprise licensed software model, your organization is responsible for the contingent worker sourcing, administration, and financial settlement processes. This means your organization needs to maintain the staff expertise in these domains. Option 3:  Managed Services Provider (MSP) Whether you are using the enterprise licensed model or the SaaS model, you may want to engage the services of sourcing, employment, payroll, and financial settlement professionals to administer your contingent workforce program. Firms that offer this expertise are often referred to as "MSPs," and they are typically staffing companies that also offer permanent and temporary hiring services. (In fact, many of the major MSPs are Oracle applications customers themselves, and they utilize the PeopleSoft Solution for the Staffing Industry to run their own business operations.) Usually, MSPs place their staff on-site at your facilities, and they can utilize either your enterprise licensed PeopleSoft sPro application or the Provade VMS SaaS software to administer the network of suppliers providing contingent workers. When you utilize an MSP, there is a separate fee for the MSP's service that is typically funded by the participating suppliers of the contingent labor. Also in this model, the suppliers of the contingent labor (not the MSP) usually pay the contingent labor force. With an MSP, you are intentionally turning over business process control for the advantages associated with having someone else manage the processes. The software option you choose will to a certain extent affect your process flexibility; however, the MSPs are often able to adapt their processes to the unique demands of your business. When you engage an MSP, you will want to give some thought to the level of engagement and "partnering" you need with your contingent workforce. Because the MSP acts as an intermediary, it can be very valuable in handling high volume, routine contracting for which there is a relatively low need for "partnering" with the contingent workforce. However, if your organization (or part of your organization) engages contingent workers for high-profile client projects that require diplomacy, intensive amounts of interaction, and personal trust, introducing an MSP into the process may prove less effective than handling the process with your own staff. In fact, in many organizations, it is common to enlist an MSP to handle contractors working on internal projects and to have permanent employees handle the contractor relationships that affect the portion of the services portfolio focused on customer-facing, billable projects. One of the key advantages of enlisting an MSP is that you do not have to maintain the expertise required for orchestrating the sourcing, hiring, and paying of contingent workers.  These are the domain of the MSPs. If your own staff members are not prepared to manage the essential "overhead" processes associated with contingent labor, working with an MSP can make solid business sense. Proper administration of a contingent workforce can make the difference between project success and failure, operating profit and loss, and legal compliance and fines. Concluding Thoughts There is little doubt that thoughtfully and purposefully constructing a service delivery strategy that leverages the strengths of contingent workers can lead to better projects, deliverables, and business results. What requires a bit more thinking is determining the platform (or platforms) that will enable each part of your organization to best deliver on its mission.

    Read the article

  • Researching runtime technologies (Xmas fun with HTML5)

    - by Eric Nelson
    The Internet Explorer 9.0 team just posted about Pirates love Daises. This is a showcase game for the power of HTML 5 running inside IE 9.0 – and the author has done a fantastic job (you can get more details from Grant’s blog post). A game developer is an ISV (Independent Software Vendor) – a B2C  ISV. In my role I don’t (typically) work with B2C ISVs, hence a reasonable question is “Why blog about it?”. I think applications like this demonstrate the power of HTML 5 and IE9 for delivering really rich user experiences which have the promise of working cross browser and cross platform - in the future as HTML5 capable browsers become the norm. Microsoft is investing heavily in implementing a great “run time” in IE9 if cross platform is an important requirement for your UX. And the other reason for blogging this… it is nearly Xmas and we all should be having a little more fun on the run in. Hence you can play with confidence that your defence to your manager is “I’m just researching a powerful runtime that Microsoft is working on which could be significant to our future B2B product directions” Play now (Needs HTML 5 browser such as IE9) Related Links: To install IE9 Beta or the Preview (which won’t replace your existing IE) check our the IE9 TestDrive center. Learn about our other important UX runtime with the on-demand recordings of the Silverlight FireStarter event. If you want FREE help with new technologies from Microsoft, sign up to Microsoft Platform Ready.

    Read the article

  • Crash after plugging in the Logitech H600 wireless transmitter

    - by SneezyDinosaur
    I recently bought the Logitech H600 Wireless Headset. When I plug in the USB wireless transmitter, Ubuntu 12.04 LTS crashes. How does that come and what do you suggest me to do? Same problem here, as soon as the H600 headset is plugged in 12.04 crashes. Relevant snip from /var/log/Xorg.failsafe.log is below, complete log can be found as a gist [ 2676.496] (**) Logitech Logitech Wireless Headset: Applying InputClass "evdev keyboard catchall" [ 2676.496] (II) Using input driver 'evdev' for 'Logitech Logitech Wireless Headset' [ 2676.496] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 2676.496] (**) Logitech Logitech Wireless Headset: always reports core events [ 2676.496] (**) evdev: Logitech Logitech Wireless Headset: Device: "/dev/input/event16" [ 2676.496] (--) evdev: Logitech Logitech Wireless Headset: Vendor 0x46d Product 0xa29 [ 2676.496] (--) evdev: Logitech Logitech Wireless Headset: Found absolute axes [ 2676.496] (--) evdev: Logitech Logitech Wireless Headset: Found absolute multitouch axes [ 2676.496] (--) evdev: Logitech Logitech Wireless Headset: Found keys [ 2676.496] (II) evdev: Logitech Logitech Wireless Headset: Configuring as mouse [ 2676.496] (II) evdev: Logitech Logitech Wireless Headset: Configuring as keyboard [ 2676.496] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2.2/2-1.2.2:1.3/input/input16/event16" [ 2676.496] (II) XINPUT: Adding extended input device "Logitech Logitech Wireless Headset" (type: KEYBOARD, id 10) [ 2676.496] (**) Option "xkb_rules" "evdev" [ 2676.496] (**) Option "xkb_model" "pc105" [ 2676.496] (**) Option "xkb_layout" "us" [ 2676.497] (II) evdev: Logitech Logitech Wireless Headset: initialized for absolute axes. [ 2676.497] Backtrace: [ 2676.497] 0: /usr/bin/X (xorg_backtrace+0x37) [0xb7698637] [ 2676.497] 1: /usr/bin/X (0xb7510000+0x18c3ba) [0xb769c3ba] [ 2676.497] 2: (vdso) (__kernel_rt_sigreturn+0x0) [0xb74ed40c] [ 2676.497] 3: /lib/i386-linux-gnu/libc.so.6 (0xb7155000+0x135d32) [0xb728ad32] [ 2676.497] 4: /usr/bin/X (XIChangeDeviceProperty+0x16c) [0xb7630b0c] [ 2676.497] 5: /usr/lib/xorg/modules/input/evdev_drv.so (0xb3f4a000+0x634e) [0xb3f5034e]

    Read the article

  • How to enable Unity 3D support in 12.04 using open-source drivers for RadeonHD cards?

    - by martin
    As the title says I can't enable the Unity 3D support when I'm using open-source drivers (xorg-edgers). I have an xfx Radeon HD 6950 by the way. If I install the proprietary 12.3 drivers from AMD it works, but I get poorer 2D performance than the open-source drivers and also I get some freezes and lock ups at random. So because of this I'm trying the open-source drivers and so far no issues at all, except this one. Running this command $ /usr/lib/nux/unity_support_test -p shows this: OpenGL vendor string: VMware, Inc. OpenGL renderer string: Gallium 0.4 on llvmpipe (LLVM 0x300) OpenGL version string: 2.1 Mesa 8.0.2 Not software rendered: no Not blacklisted: yes GLX fbconfig: yes GLX texture from pixmap: yes GL npot or rect textures: yes GL vertex program: yes GL fragment program: yes GL vertex buffer object: yes GL framebuffer object: yes GL version is 1.4+: yes Unity 3D supported: no And this command $ lspci -nn | grep VGA shows: 01:00.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI Cayman PRO [Radeon HD 6950] [1002:6719] So, is this normal? Do I need to go back to proprietary drivers to enable Unity 3D? If anyone can give me help, I'll much appreciate it.

    Read the article

  • WPA2 authentication fails using USB network devices (Linksys and Rosewill)

    - by Greg Youtz
    Decided to reduce the clutter in the house and replace a wired connection with a wireless one on my wife's system using USB network device Rosewill RNX-X1. I can see and connect to unprotected network, but WPA2 authentication repeatedly fails. Tried the same with a Linksys USB network adapter. Both failed to authenticate. Worth noting that I recently switched from Comcast to CenturyLink and so switched routers. The system connected successfully to previous router (Linksys EA4500) using WPA2. Would think it is the router (Actiontec C1000A) but all other devices (TV, iPad, Windows, Blackberry, and Squeezebox) connect ok. Would appreciate some diagnostic guidance and insight (phrased for a newbie!) Tests to date: sudo lshw -class network *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 01 serial: 00:e0:4d:30:40:a1 size: 10Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=N/A latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:47 ioport:ac00(size=256) memory:fdcff000-fdcfffff memory:fdb00000-fdb1ffff *-network description: Wireless interface physical id: 1 bus info: usb@1:2 logical name: wlan1 serial: 00:02:6f:bd:30:a0 capabilities: ethernet physical wireless configuration: broadcast=yes driver=rt2800usb driverversion=3.2.0-31-generic firmware=0.29 link=no multicast=yes wireless=IEEE 802.11bgn sudo lspci -v 00:00.0 RAM memory: NVIDIA Corporation MCP67 Memory Controller (rev a2) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0 Capabilities: [44] HyperTransport: Slave or Primary Interface Capabilities: [dc] HyperTransport: MSI Mapping Enable+ Fixed- 00:01.0 ISA bridge: NVIDIA Corporation MCP67 ISA Bridge (rev a2) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0 00:01.1 SMBus: NVIDIA Corporation MCP67 SMBus (rev a2) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: 66MHz, fast devsel, IRQ 11 I/O ports at fc00 [size=64] I/O ports at 1c00 [size=64] I/O ports at 1c40 [size=64] Capabilities: [44] Power Management version 2 Kernel driver in use: nForce2_smbus Kernel modules: i2c-nforce2 00:01.2 RAM memory: NVIDIA Corporation MCP67 Memory Controller (rev a2) Flags: 66MHz, fast devsel 00:02.0 USB controller: NVIDIA Corporation MCP67 OHCI USB 1.1 Controller (rev a2) (prog-if 10 [OHCI]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23 Memory at fe02f000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Kernel driver in use: ohci_hcd 00:02.1 USB controller: NVIDIA Corporation MCP67 EHCI USB 2.0 Controller (rev a2) (prog-if 20 [EHCI]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22 Memory at fe02e000 (32-bit, non-prefetchable) [size=256] Capabilities: [44] Debug port: BAR=1 offset=0098 Capabilities: [80] Power Management version 2 Kernel driver in use: ehci_hcd 00:04.0 USB controller: NVIDIA Corporation MCP67 OHCI USB 1.1 Controller (rev a2) (prog-if 10 [OHCI]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21 Memory at fe02d000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Kernel driver in use: ohci_hcd 00:04.1 USB controller: NVIDIA Corporation MCP67 EHCI USB 2.0 Controller (rev a2) (prog-if 20 [EHCI]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20 Memory at fe02c000 (32-bit, non-prefetchable) [size=256] Capabilities: [44] Debug port: BAR=1 offset=0098 Capabilities: [80] Power Management version 2 Kernel driver in use: ehci_hcd 00:06.0 IDE interface: NVIDIA Corporation MCP67 IDE Controller (rev a1) (prog-if 8a [Master SecP PriP]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0 [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8] [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1] [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8] [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1] I/O ports at f000 [size=16] Capabilities: [44] Power Management version 2 Kernel driver in use: pata_amd Kernel modules: pata_amd 00:07.0 Audio device: NVIDIA Corporation MCP67 High Definition Audio (rev a1) Subsystem: Biostar Microtech Int'l Corp Device 820c Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22 Memory at fe024000 (32-bit, non-prefetchable) [size=16K] Capabilities: [44] Power Management version 2 Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+ Capabilities: [6c] HyperTransport: MSI Mapping Enable- Fixed+ Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 00:08.0 PCI bridge: NVIDIA Corporation MCP67 PCI Bridge (rev a2) (prog-if 01 [Subtractive decode]) Flags: bus master, 66MHz, fast devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: fdf00000-fdffffff Prefetchable memory behind bridge: fd000000-fd0fffff Capabilities: [b8] Subsystem: NVIDIA Corporation Device cb84 Capabilities: [8c] HyperTransport: MSI Mapping Enable- Fixed- 00:09.0 IDE interface: NVIDIA Corporation MCP67 AHCI Controller (rev a2) (prog-if 85 [Master SecO PriO]) Subsystem: Biostar Microtech Int'l Corp Device 5407 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23 I/O ports at 09f0 [size=8] I/O ports at 0bf0 [size=4] I/O ports at 0970 [size=8] I/O ports at 0b70 [size=4] I/O ports at dc00 [size=16] Memory at fe02a000 (32-bit, non-prefetchable) [size=8K] Capabilities: [44] Power Management version 2 Capabilities: [8c] SATA HBA v1.0 Capabilities: [b0] MSI: Enable- Count=1/8 Maskable- 64bit+ Capabilities: [cc] HyperTransport: MSI Mapping Enable- Fixed+ Kernel driver in use: ahci 00:0b.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000b000-0000bfff Memory behind bridge: fde00000-fdefffff Prefetchable memory behind bridge: 00000000fdd00000-00000000fddfffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:0c.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 0000a000-0000afff Memory behind bridge: fdc00000-fdcfffff Prefetchable memory behind bridge: 00000000fdb00000-00000000fdbfffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:0d.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 00009000-00009fff Memory behind bridge: fda00000-fdafffff Prefetchable memory behind bridge: 00000000fd900000-00000000fd9fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:0e.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 I/O behind bridge: 00008000-00008fff Memory behind bridge: fd800000-fd8fffff Prefetchable memory behind bridge: 00000000fd700000-00000000fd7fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:0f.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=06, subordinate=06, sec-latency=0 I/O behind bridge: 00007000-00007fff Memory behind bridge: fd600000-fd6fffff Prefetchable memory behind bridge: 00000000fd500000-00000000fd5fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:10.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=07, subordinate=07, sec-latency=0 I/O behind bridge: 00006000-00006fff Memory behind bridge: fd400000-fd4fffff Prefetchable memory behind bridge: 00000000fd300000-00000000fd3fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:11.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=08, subordinate=08, sec-latency=0 I/O behind bridge: 00005000-00005fff Memory behind bridge: fd200000-fd2fffff Prefetchable memory behind bridge: 00000000fd100000-00000000fd1fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:12.0 VGA compatible controller: NVIDIA Corporation C68 [GeForce 7050 PV / nForce 630a] (rev a2) (prog-if 00 [VGA controller]) Subsystem: Biostar Microtech Int'l Corp Device 1406 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21 Memory at fb000000 (32-bit, non-prefetchable) [size=16M] Memory at e0000000 (64-bit, prefetchable) [size=256M] Memory at fc000000 (64-bit, non-prefetchable) [size=16M] [virtual] Expansion ROM at 80000000 [disabled] [size=128K] Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+ Kernel driver in use: nvidia Kernel modules: nvidia_current, nouveau, nvidiafb 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration Flags: fast devsel Capabilities: [80] HyperTransport: Host or Secondary Interface 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map Flags: fast devsel 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller Flags: fast devsel 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control Flags: fast devsel Capabilities: [f0] Secure device <?> Kernel driver in use: k8temp Kernel modules: k8temp 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01) Subsystem: Biostar Microtech Int'l Corp Device 2305 Flags: bus master, fast devsel, latency 0, IRQ 47 I/O ports at ac00 [size=256] Memory at fdcff000 (64-bit, non-prefetchable) [size=4K] [virtual] Expansion ROM at fdb00000 [disabled] [size=128K] Capabilities: [40] Power Management version 2 Capabilities: [48] Vital Product Data Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] Express Endpoint, MSI 00 Capabilities: [84] Vendor Specific Information: Len=4c <?> Capabilities: [100] Advanced Error Reporting Capabilities: [12c] Virtual Channel Capabilities: [148] Device Serial Number 32-00-00-00-10-ec-81-68 Capabilities: [154] Power Budgeting <?> Kernel driver in use: r8169 Kernel modules: r8169 sudo rfkill list all 2: phy2: Wireless LAN Soft blocked: no Hard blocked: no Would appreciate insight on how to chase this down.

    Read the article

  • How do I get Intel 845g graphics working?

    - by Rayson Jimenez
    I need help enabling Intel 845g to run with intel drivers. I'v looked everywhere on the net with no joy. I can't seem to get intel video drivers to load the gui, only with vesa drivers. it drops me straight to the shell prompt. Xorg.0.log shows the following. Any help would be GREATLY appreciated. [ 244.843] (II) LoadModule: "intel" [ 244.843] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so [ 244.844] (II) Module intel: vendor="X.Org Foundation" [ 244.844] compiled for 1.9.0, module version = 2.12.0 [ 244.844] Module class: X.Org Video Driver [ 244.844] ABI class: X.Org Video Driver, version 8.0 [ 244.844] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale, Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge [ 244.844] (--) using VT number 8 [ 244.971] (EE) intel(0): No kernel modesetting driver detected. [ 244.971] (II) UnloadModule: "intel" [ 244.971] (EE) Screen(s) found, but none have a usable configuration. [ 244.971] Fatal server error: [ 244.971] no screens found [ 244.971] Please consult the The X.Org Foundation support at http://wiki.x.org for help. [ 244.971] Please also check the log file at "/var/log/Xorg.0.log" for additional information. [ 244.971] [ 245.213] ddxSigGiveUp: Closing log

    Read the article

  • Firefox 12's hardware acceleration on Ubuntu 12.04 LTS

    - by user64943
    After I have installed Ubuntu 12.04 LTS (32 bits), Firefox 12 works fine but without hardware acceleration. Needless to say I have the latest nVidia's proprietary drivers installed and my Firefox Preferences, on "Advanced" tab, "Browsing" section, have the option "Use hardware acceleration when available" checked. I have tried the following things before asking this question: Creating a boolean key "webgl.force-enabled" and set it to true on Firefox's page about:config; Starting a new profile like commented on thread Mozilla Firefox 12 is very slow on Ubuntu 12.04 LTS; I have updated my nVidia driver to version 295.53. And none of this have worked. As you can see below in my Firefox's page about:support report, "Graphics" section shows no "GPU Accelerated Windows": Adapter Description NVIDIA Corporation -- GeForce GTX 460/PCIe/SSE2 Vendor ID NVIDIA Corporation Device ID GeForce GTX 460/PCIe/SSE2 Driver Version 4.2.0 NVIDIA 295.53 WebGL Renderer NVIDIA Corporation -- GeForce GTX 460/PCIe/SSE2 -- 4.2.0 NVIDIA 295.53 GPU Accelerated Windows 0 AzureBackend skia I use the following site to test hardware acceleration: http://ie.microsoft.com/testdrive/Performance/FishBowl/ On Windows 7 I get 60 fps even with 1,750 fishes on browser's Full Screen Mode (1680x1050x32bit-color). On Ubuntu 12.04 LTS, same nVidia drivers (as shown in report), won't go faster than 15 fps with only 1,000 fishes. Can anybody help me? Best Regards,

    Read the article

  • Gartner Market Share: Oracle is #1 in PPM for WW revenues

    - by Melissa Centurio Lopes
    v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Normal 0 false false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} By Sylvie Mackenzie, PMP The Gartner report published March 2014, Market Share: All Software Markets, Worldwide, 2013 shows Oracle as the leader in the Project and Portfolio Management space, with a market share of 22.5% and growth rate of 4.9%. Gartner WW PPM Vendor Share, 2013

    Read the article

  • SD Card Reader not working in Ubuntu 12.04

    - by tripkane
    I have a read many other posts on this issue and believe that Ubuntu 12.04 is not even recognizing my SD Card Reader as just that: Computer Model: Metabox (Australian builder of Clevo laptops) / Clevo P150EM OS: Ubuntu 12.04 (64 Bit) CPU: Intel(R) Core(TM) i7-3720QM CPU @ 2.60GHz HD: 120GB Intel 550/520MB/s SSD According to the people who built my computer, the specs of the SD Card reader in my comp are as follows: Manufacture: Realtek Semiconduct Corp. Location: PCI bus 3 Hardware ID: PCI\Ven_10EC&DEV_5289&SUBSYS_51051558 Physical device object name: \Device\NTPNP_PCI0015 Here are the relevant outputs of the following commands run from the terminal: sudo lshw *-generic UNCLAIMED description: Unassigned class product: Realtek Semiconductor Co., Ltd. vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 version: 01 width: 32 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list configuration: latency=0 resources: memory:f6a00000-f6a0ffff sudo lspci -v -nn 03:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device [10ec:5289] (rev 01) Subsystem: CLEVO/KAPOK Computer Device [1558:5105] Flags: bus master, fast devsel, latency 0, IRQ 4 Memory at f6a00000 (32-bit, non-prefetchable) [size=64K] Capabilities: [40] Power Management version 3 Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [70] Express Endpoint, MSI 00 Capabilities: [b0] MSI-X: Enable- Count=1 Masked- Capabilities: [d0] Vital Product Data Capabilities: [100] Advanced Error Reporting Capabilities: [140] Virtual Channel Capabilities: [160] Device Serial Number 00-00-00-00-00-00-00-00 Does the unassigned details of these outputs mean that Ubunutu desn't know that the SD Card Reader is one and what do with it? and if so how should I go about fixing it?? Cheers ;)

    Read the article

< Previous Page | 41 42 43 44 45 46 47 48 49 50 51 52  | Next Page >