Search Results

Search found 29284 results on 1172 pages for 'weblogic 10 x'.

Page 45/1172 | < Previous Page | 41 42 43 44 45 46 47 48 49 50 51 52  | Next Page >

  • Airport Express chokes Wi-Fi for a few seconds, several times per hour. Any idea why?

    - by user13727
    I'm using a MacBookPro connected to an AiportExpress' Wi-FI network. Every once in a while, the Wi-Fi will choke up and either drop some packets, or lag horribly for several seconds. I'm losing hair over this because every time I chat on Skype, the call hangs randomly due to this problem. Any idea what's wrong? Some more details: two networks are set up: 2.4Ghz and 5Ghz, and the issue happens on both the network uses WPA2 Personal for security the Airport is in the same room with my computer the Airport is fairly new, bought this summer, model number off the back: A1392 tried connecting to a neighbours wifi to see if it's a problem with my computer, or interference. It's not, it doesn't happen on their network. tried resetting it several times tried changing channels manually Ping results are below, so you can see what I'm talking about. EDIT: 10.0.1.1 is the Airport's IP 64 bytes from 10.0.1.1: icmp_seq=1795 ttl=255 time=0.813 ms 64 bytes from 10.0.1.1: icmp_seq=1796 ttl=255 time=3.335 ms 64 bytes from 10.0.1.1: icmp_seq=1797 ttl=255 time=3.403 ms 64 bytes from 10.0.1.1: icmp_seq=1798 ttl=255 time=3.414 ms 64 bytes from 10.0.1.1: icmp_seq=1799 ttl=255 time=3.227 ms 64 bytes from 10.0.1.1: icmp_seq=1800 ttl=255 time=3.274 ms 64 bytes from 10.0.1.1: icmp_seq=1801 ttl=255 time=3.253 ms 64 bytes from 10.0.1.1: icmp_seq=1802 ttl=255 time=3.292 ms >>>> choke starts <<< 64 bytes from 10.0.1.1: icmp_seq=1803 ttl=255 time=53.977 ms 64 bytes from 10.0.1.1: icmp_seq=1804 ttl=255 time=35.049 ms 64 bytes from 10.0.1.1: icmp_seq=1805 ttl=255 time=19.820 ms >>>> choke ends <<< 64 bytes from 10.0.1.1: icmp_seq=1806 ttl=255 time=0.716 ms 64 bytes from 10.0.1.1: icmp_seq=1807 ttl=255 time=0.705 ms 64 bytes from 10.0.1.1: icmp_seq=1808 ttl=255 time=0.919 ms 64 bytes from 10.0.1.1: icmp_seq=1809 ttl=255 time=0.659 ms 64 bytes from 10.0.1.1: icmp_seq=1810 ttl=255 time=0.877 ms 64 bytes from 10.0.1.1: icmp_seq=1811 ttl=255 time=0.679 ms 64 bytes from 10.0.1.1: icmp_seq=1812 ttl=255 time=0.854 ms 64 bytes from 10.0.1.1: icmp_seq=1813 ttl=255 time=0.644 ms 64 bytes from 10.0.1.1: icmp_seq=1814 ttl=255 time=3.779 ms ... time passes .. 64 bytes from 10.0.1.1: icmp_seq=1599 ttl=255 time=0.674 ms 64 bytes from 10.0.1.1: icmp_seq=1600 ttl=255 time=0.930 ms 64 bytes from 10.0.1.1: icmp_seq=1601 ttl=255 time=0.665 ms 64 bytes from 10.0.1.1: icmp_seq=1602 ttl=255 time=1.085 ms Request timeout for icmp_seq 1603 Request timeout for icmp_seq 1604 64 bytes from 10.0.1.1: icmp_seq=1605 ttl=255 time=104.969 ms 64 bytes from 10.0.1.1: icmp_seq=1606 ttl=255 time=11.521 ms 64 bytes from 10.0.1.1: icmp_seq=1607 ttl=255 time=0.926 ms 64 bytes from 10.0.1.1: icmp_seq=1608 ttl=255 time=0.993 ms 64 bytes from 10.0.1.1: icmp_seq=1609 ttl=255 time=0.745 ms And the Signal-Noise ratio:

    Read the article

  • Mac OS X Server 10.6.6 "disables" CPU in VMware Fusion

    - by wjlafrance
    Hello! I installed Mac OS X Server 10.6.0 in VMWare Fusion the other night and it worked perfectly, until I ran Software Update. I upgraded to 10.6.6 through the combo updater, and now when I start the VM it says: "The CPU has been disabled by the guest operating system. You will need to power off or reset the virtual machine at this point." I've switched the operating system in the options to OS X Server 32bit, 64bit, and even to Windows 7, and nothing has worked. Does anyone have any ideas?

    Read the article

  • how to install Mysql & tomcat on mac os x 10.5.8

    - by Divya Jyothi
    Hi can some one provide me how to install both om my mac osx 10.5.8 Hi can some one provide me how to install both om my mac osx 10.5.8 Ok this what I have done Downloaded MySQL version 5.5.22.dmg for Mac OS X 10.5 (x86, 64-bit) from http://dev.mysql.com/downloads/mysql/ Installed three files from it after mounting.... 1.MySQL -version.pkg installed it by double clicking on it 2.mysqlstartupitem.pkg installed it 3. MySql.prefpane - after installing it says it doesn't work on intel based Mac After that I have no idea whati need to start Regarding tomcat JAVA_HOME WAS the problem;(

    Read the article

  • Upgrading Mac OS X 10.5.8 Corrupted Lightroom 2.7

    - by Tedd
    I use Photoshop CS4 and Lightroom 2. I recntly upgraded to 10.5.8 and began to have issues with LR. So, I reinstalled and downgraded my OS. I'm now running 10.5.2 on my MacBook 2.4G Core Duo with 4G RAM. Everything works fine now, but the downgrade also resulted in having only Safari 3.0.4 and and older version of iTunes. I can't upgrade either of those until I upgrade the OS but I'm reluctant to do so because I might have problems again. Any suggestions? Install 10.6 instead? What kind of issues can I expect from that?

    Read the article

  • 10 System LAN latency with ADSL modem as gateway

    - by itsoft3g
    Recently I expanded LAN in my office from 3 to 10 computers. Structure star topology, one ADSL Modem connected to One Switch which is again connected to 10 computers. Also we have Wifi device Netgear which is connected from switch. ADSL Modem acts as the DHCP Server, all the system will have default gateway IP (ADSL Modem's IP) Network latency is now become very high, All the chat severs disconnect often like google talk, skype etc, also internet become very very slow. when all the computer turned on. We have 4 Mbps Download and 100 Kbps upload Net speed. Its look like ADSL Modem cannot able to handle all the connections. I tried to setup a system as default gateway which will connect to modem, not sure how to do this. Please advice on this.

    Read the article

  • Google Chrome gets really slow on 10+ open tabs

    - by Anton
    For some time already I face a problem with Google Chrome. I really love this browser, but on Windows 7 on a pretty decent machine (i5, 4GB RAM) it gets REALLY slow when I open for instance 10 techcrunch.com pages. Once I do that it becomes virtually difficult to scroll through pages and the general responsiveness of the browser gets down. And if I open 20+ or 30+ tabs there is a good chance all of them will crash. Does anyone got an idea? This happens to me on several PCs with Windows 7 64bit. At 10 tabs there is 600-700MB memory used by Chrome. Two systems have the issue are both laptops with integrated graphics. One by Intel, the other an nVidia GeForce 310M.

    Read the article

  • cisco asa query dns external

    - by Alpacino
    my lab network asa firewall below 10.10.10.20 -- ASA --- 192.168.1.10 -- website external my client 10.10.10.20 want to access website external and i create nat nat (inside,outside) static 192.168.1.10 and access list access-list outside-acl extended permit tcp any host 10.10.10.20 eq www access-list outside-acl extended permit tcp any host 10.10.10.20 eq domain access-list inside-acl extended permit tcp 10.10.10.0 255.255.255.0 any eq www access-list inside-acl extended permit tcp 10.10.10.0 255.255.255.0 any eq domain access-group outside-acl in interface outside access-group inside-acl in interface inside when i access to website with domain name it can't access but i access website with ip address it work please help me to solve problem thank you

    Read the article

  • Mac OS X Server 10.6.6 "disables" CPU in VMware Fusion

    - by wjlafrance
    I installed Mac OS X Server 10.6.0 in VMWare Fusion the other night and it worked perfectly, until I ran Software Update. I upgraded to 10.6.6 through the combo updater, and now when I start the VM it says: "The CPU has been disabled by the guest operating system. You will need to power off or reset the virtual machine at this point." I've switched the operating system in the options to OS X Server 32bit, 64bit, and even to Windows 7, and nothing has worked. Does anyone have any ideas?

    Read the article

  • Use both OpenVPN & eth0 together

    - by shadyabhi
    I connect to a VPN using openVPN. Now, after the connection is established, all my traffic goes through tun0. My LAN gateway is 10.100.98.4... So, for apps to use my direct internet connnection I did sudo route add default gw 10.100.98.4 But, I cant use tun0 now. I know this because curl --interface tun0 google.com doesnt give me anything.. How do I go about using both connections simultaneously. How can I achieve that? ROUTING TABLES:- Without VPN running:- Destination Gateway Genmask Flags Metric Ref Use Iface 10.100.98.0 * 255.255.255.0 U 1 0 0 eth0 default 10.100.98.4 0.0.0.0 UG 0 0 0 eth0 With VPN:- Destination Gateway Genmask Flags Metric Ref Use Iface 10.10.0.1 10.10.54.230 255.255.255.255 UGH 0 0 0 tun0 10.10.54.230 * 255.255.255.255 UH 0 0 0 tun0 free-vpn.torvpn 10.100.98.4 255.255.255.255 UGH 0 0 0 eth0 10.100.98.0 * 255.255.255.0 U 1 0 0 eth0 default 10.10.54.230 0.0.0.0 UG 0 0 0 tun0 After the route command- Destination Gateway Genmask Flags Metric Ref Use Iface 10.10.0.1 10.10.54.230 255.255.255.255 UGH 0 0 0 tun0 10.10.54.230 * 255.255.255.255 UH 0 0 0 tun0 free-vpn.torvpn 10.100.98.4 255.255.255.255 UGH 0 0 0 eth0 10.100.98.0 * 255.255.255.0 U 1 0 0 eth0 default 10.100.98.4 0.0.0.0 UG 0 0 0 eth0 default 10.10.54.230 0.0.0.0 UG 0 0 0 tun0

    Read the article

  • Network Table assistance

    - by mitchnufc
    I am designing a small network and have came up with the following table I am just wondering if this seems right, would appreciate some feedback, thanks. Network/Router First IP Last IP Subnet Host Broadcast Router 1 162.10.0.1 162.10.0.7 255.255.255.248 162.10.0.0 162.10.0.8 Network 1 162.10.1.1 162.10.2.253 255.255.254.0 162.10.1.0 162.10.2.254 Network 2 162.10.0.9 162.10.0.14 255.255.255.248 162.10.0.8 162.10.0.15 Router 2 162.10.0.17 162.10.0.18 255.255.255.252 162.10.0.16 162.10.0.19 Network 3 162.10.0.21 162.10.0.146 255.255.255.128 162.10.0.20 162.10.0.147 Router one is the IP assigned by the ISP

    Read the article

  • Mac OS X Server 10.6.6 "disables" CPU in VMware Fusion [closed]

    - by wjlafrance
    Hello! I installed Mac OS X Server 10.6.0 in VMWare Fusion the other night and it worked perfectly, until I ran Software Update. I upgraded to 10.6.6 through the combo updater, and now when I start the VM it says: "The CPU has been disabled by the guest operating system. You will need to power off or reset the virtual machine at this point." I've switched the operating system in the options to OS X Server 32bit, 64bit, and even to Windows 7, and nothing has worked. Does anyone have any ideas?

    Read the article

  • ?????Java EE??????????(?2?)????

    - by Masa Sasaki
    WebLogic Server?????????????WebLogic Server???????? 2014?6?24?? ??48?WebLogic Server???@??????????? ?????????Java EE???????????????(?4?)??2???? 5?27?????????1? Java EE&WebLogic Server??? ?Web ?????????????Java??????????????????????????? Java EE????????????????WebLogic Server??????????????????????????? WebLogic Server???????????????????????Java EE???????????????????? JSF(JavaServer Faces)??????????????????????????????????? ?2????????????? (?????? Fusion Middleware?????? ??? ??) ?1? Java EE & Oracle WebLogic Server??????????? ????????·????? ??????????????????????????????? ????????????????????? ??????????????????????????? ???????????????????? ???????????????????????????????? ?????????????????????????????????? ??????????????????????????·??????? ???????????????????? ???????????????????????????? ???????????=????????????????????? ????????·??????????????????????? ??????????????????????????? ??????????????????????????? Oracle WebLogic Server??????Java EE 6?????????????? ???????????????Java EE ??????????????? ?????? Java EE 6???????????? Java EE 6?????JSR-000316 JavaTM Platform, Enterprise Edition 6 (Final Release)? ?????????JSF 2.1(??????????????????????????Web????????·???????)?Servlet3.1(?????·???????????????????????Servlet???Ajax??)? EJB3.1(?????·????????????????????????????????)? JAX-RS(??????????????Web????????)? CDI(????????????????????DI???????????)??? ???????????????? ?2???3???4?????Web????????????????2?JSF (JavaServer Faces), ?3?EJB(Enterprise JavaBeans)?CDI(Context Dependency Injection)? ?4?JPA(Java Persistent API)???????????????????????????????? ?????????????????????????????????????????????????????????? WebLogic Server?? ?2???????????????WebLogic Server????????????? ???WebLogic Server???????????????????????????????????? ??????? ???????·?????????????????? ??48?WebLogic Server???@???????????? 2014?6?24?? ??48?WebLogic Server???@?????????????????????????? ???????????????? ??????Java EE??????????????: ?2?JSF??? JSF (JavaServer Faces)??Web????????????????????????????????Web??????????????????JSF????? ????????????????JSF??????????????????????????????????????????Ajax? ?????????? ?????? ??????????? ?? ?? ?OutOfMemoryError ?????/Heap ?????(MAT)????? Java????????????????????(??OOME)?????????????????????????????????? ???????????????????????????????????Eclipse Memory Analyzer(MAT)???????????? ?????????????????? ???????????? ?? ??? ????????Q&A? ?WebLogic Server?????????????????????? (???)WebLogic Server?????? ?????? WebLogic Server??? WebLogic Server?????????WebLogic Server???? ?! WebLogic Server??????(???????????) WebLogic Server???????? WebLogic Server??????

    Read the article

  • File Access problems with SLES 10 SP2 OES2 SP1

    - by Blackhawk131
    We have identified a couple of repeatable, demonstrable scenarios with unexplained rejected folder access on our servers for Mac users. Hopefully, this can be presented to Novell for a solution. What we did to demonstrate scenario 1; 1. setup a PC and Mac side-by-side 2. login to our server and open up to a central location on both Mac and PC 3. on the PC in that central location create a folder 4. on the Mac in that central location drag the created folder to the Mac desktop, this should work fine, no problem 5. on the PC rename that folder 6. on the Mac drag a file to that renamed folder, this should error with the following message; a. You cannot copy some of these items to the destination because their names are too long for the destination. Do you want to skip copying these items and continue copying the other items? b. Select skip, response is the filename is copied to the location with zero or small byte size. Try opening it and you get file is corrupted error message. What we did to demonstrate scenario 2; 1. setup a PC and Mac side-by-side 2. login to our server and open up to a central location on both Mac and PC 3. on the PC in that central location create a folder then create a subfolder 4. copy some content into the subfolder 5. on the Mac in that central location drag the created top level folder to the Mac desktop, this should work fine, no problem 6. on the PC rename that subfolder 7. on the Mac drag that top level folder to the Mac desktop, this should error on the Mac with the following; a. The operation cannot be completed because you do not have sufficient privileges for b. The operation cannot be completed because you do not have sufficient privileges for 8. on the Mac, if you open that subfolder you can see the file copied in step 4 above but, you can not open that file, you get the following message if you try; a. There was an error opening this document. You do not have permission to open this file. 9. on the PC drag some content into the top level folder 10. on the Mac you can open that file directly from the server or copy it locally, no problem, however-the subfolder is still corrupted or locked, whichever 11. on the PC rename the top level folder 12. on the Mac that same file just opened in step 10 above is now not accessible, get the following message; a. The document could not be opened. I have observed some variances in the above. For instance, a change on the PC side may take a moment before you can observer or act on the Mac side - kind of like the server is slow to respond. Also, the error message may vary. However, the key is once a folder, or subfolder, gets renamed by a PC, Mac problems commence. The solution is to create a new folder from a PC and copy the contents of the corrupted folder to the new folder and not rename the folder name. This has to be done on a PC because the corrupted folder is not accessible by a Mac user. Another problem that dovetails with the above is that we know certain characters are not allowed for PC folder or filenames. If a Mac user creates a folder with a slash in the file name, from the PC the user does not see that slash in the name. As soon as the PC user copies a file to that folder, the Mac user is locked from that folder. Will get the following error message; - Sorry, the operation could not be completed because an unexpected error occurred. - (Error code - 50) In addition to the above mentioned character issue with folders, the problem is more evil with filenames. If, for example, you create a file with a slash in the filename on a Mac and copy it to the server you will get the following error message; - You cannot copy some of these items to the destination because their names are too long for the destination. Do you want to skip copying these items and continue copying the other items? Select either Stop or Skip buttons. It does not matter which button is selected. The file name gets copied to the destination location at a reduced size. Depending on the file type, the icon associated with the file may or may not be present. Furthermore, if you open that file on the server you will get the following message; - Couldnt open the file. It may be corrupt or a file format that doesnt recognize. From the users perspective, if they are not observant of the icon or file size, they may disregard the error message and think their file has copied as intended. Only later do they discover the file is corrupt if they open that file. I want to make a note on this problem. It is the PC causing the issue. You can change folder and file names all day on a MAC and you don't have a problem as long as a character is not the issue. Once you change the file name or folder name from a PC the entire folder structure from that level down is corrupted. But it has to be resolved from a PC by creating a new folder and copying the contents to the new folder like stated above. Is something not configured correctly? SUSE Linux Enterprise Server 10 (x86_64) VERSION = 10 PATCHLEVEL = 2 LSB_VERSION="core-2.0-noarch:core-3.0-noarch:core-2.0-x86_64:core-3.0-x86_64" Novell Open Enterprise Server 2.0.1 (x86_64) VERSION = 2.0.1 PATCHLEVEL = 1 BUILD Note: We use Novell clients on all windows systems to connect to the servers for file access and network storage. We use AFP to allow OSx systems to connect to servers.

    Read the article

  • File Access problems with SLES 10 SP2 OES2 SP1

    - by Blackhawk131
    We have identified a couple of repeatable, demonstrable scenarios with unexplained rejected folder access on our servers for Mac users. Hopefully, this can be presented to Novell for a solution. What we did to demonstrate scenario 1; 1. setup a PC and Mac side-by-side 2. login to our server and open up to a central location on both Mac and PC 3. on the PC in that central location create a folder 4. on the Mac in that central location drag the created folder to the Mac desktop, this should work fine, no problem 5. on the PC rename that folder 6. on the Mac drag a file to that renamed folder, this should error with the following message; a. You cannot copy some of these items to the destination because their names are too long for the destination. Do you want to skip copying these items and continue copying the other items? b. Select skip, response is the filename is copied to the location with zero or small byte size. Try opening it and you get file is corrupted error message. What we did to demonstrate scenario 2; 1. setup a PC and Mac side-by-side 2. login to our server and open up to a central location on both Mac and PC 3. on the PC in that central location create a folder then create a subfolder 4. copy some content into the subfolder 5. on the Mac in that central location drag the created top level folder to the Mac desktop, this should work fine, no problem 6. on the PC rename that subfolder 7. on the Mac drag that top level folder to the Mac desktop, this should error on the Mac with the following; a. The operation cannot be completed because you do not have sufficient privileges for b. The operation cannot be completed because you do not have sufficient privileges for 8. on the Mac, if you open that subfolder you can see the file copied in step 4 above but, you can not open that file, you get the following message if you try; a. There was an error opening this document. You do not have permission to open this file. 9. on the PC drag some content into the top level folder 10. on the Mac you can open that file directly from the server or copy it locally, no problem, however-the subfolder is still corrupted or locked, whichever 11. on the PC rename the top level folder 12. on the Mac that same file just opened in step 10 above is now not accessible, get the following message; a. The document could not be opened. I have observed some variances in the above. For instance, a change on the PC side may take a moment before you can observer or act on the Mac side - kind of like the server is slow to respond. Also, the error message may vary. However, the key is once a folder, or subfolder, gets renamed by a PC, Mac problems commence. The solution is to create a new folder from a PC and copy the contents of the corrupted folder to the new folder and not rename the folder name. This has to be done on a PC because the corrupted folder is not accessible by a Mac user. Another problem that dovetails with the above is that we know certain characters are not allowed for PC folder or filenames. If a Mac user creates a folder with a slash in the file name, from the PC the user does not see that slash in the name. As soon as the PC user copies a file to that folder, the Mac user is locked from that folder. Will get the following error message; - Sorry, the operation could not be completed because an unexpected error occurred. - (Error code - 50) In addition to the above mentioned character issue with folders, the problem is more evil with filenames. If, for example, you create a file with a slash in the filename on a Mac and copy it to the server you will get the following error message; - You cannot copy some of these items to the destination because their names are too long for the destination. Do you want to skip copying these items and continue copying the other items? Select either Stop or Skip buttons. It does not matter which button is selected. The file name gets copied to the destination location at a reduced size. Depending on the file type, the icon associated with the file may or may not be present. Furthermore, if you open that file on the server you will get the following message; - Couldnt open the file. It may be corrupt or a file format that doesnt recognize. From the users perspective, if they are not observant of the icon or file size, they may disregard the error message and think their file has copied as intended. Only later do they discover the file is corrupt if they open that file. I want to make a note on this problem. It is the PC causing the issue. You can change folder and file names all day on a MAC and you don't have a problem as long as a character is not the issue. Once you change the file name or folder name from a PC the entire folder structure from that level down is corrupted. But it has to be resolved from a PC by creating a new folder and copying the contents to the new folder like stated above. Is something not configured correctly? SUSE Linux Enterprise Server 10 (x86_64) VERSION = 10 PATCHLEVEL = 2 LSB_VERSION="core-2.0-noarch:core-3.0-noarch:core-2.0-x86_64:core-3.0-x86_64" Novell Open Enterprise Server 2.0.1 (x86_64) VERSION = 2.0.1 PATCHLEVEL = 1 BUILD Note: We use Novell clients on all windows systems to connect to the servers for file access and network storage. We use AFP to allow OSx systems to connect to servers.

    Read the article

  • why Apache with ssl but back end weblogic without ssl works?

    - by huangli
        Hello everyone. my question is very simple . The link below is a picture about my architecture. https://docs.google.com/open?id=0BxSXbpgYIZVOR212RVk4ZDN1Sm8.      The pic above shows the architecture right now and it works correctly ! which means I could visit apache with url https//apchehost:8080, could not visit the web app with https served by weblogic but I could visit these app with https served by Apache(Apache is proxy server).      My question is why the Apache is configured with ssl but weblogic without ssl works ? I think weblogic should also configured with ssl . If this works , what about security level ? Is the ssl really works if only Apache configured with ssl but Weblogic without it ? Thanks . condition: Apache 2.2.17 with weblogic module mod_wl_22.so Weblogic: 10.3 OS: Windows server 2003

    Read the article

  • Embedding BIP just got easier!

    - by Tim Dexter
    To make up for yesterday's documentation faux pas, when I referenced Kan's blog as a source for the debug feature over Leslie's fine official documentation that had come out some time before Kan's blog. Apologies again Leslie! I noticed another new feature that I was unaware of in the New Features guide for 10.1.3.4.1. The ability to remove the BI Publisher header from the user interface so you can get this: instead of this. Useful? If you wanted to host BIP inside another application such as a portal or custom app, you can make the BIP UI app look much more integrated. By default you still get our 'blue' look and feel' but I have documented else where how you can change that. For instance, now you can have BIP hosted inside a BIEE instance and provide access to all the reports a user might wish to run with very little effort rather than picking and choosing what to bubble up to the dashboard. How do you do it? Get on over to the New Features guide and find out, there are some other goodies there too. Note to self, RTFM!

    Read the article

  • Configuring weblogic server console with external server urls, etc

    - by MeBigFatGuy
    there are obviously various 'canned' configuration options in oracle's weblogic server console for setting up data sources, jms queues, ldap servers etc, etc. What i want however is a way to configure other servers, mostly server urls, etc, in the console as well, and allow web applications running on the web server to access those configuration settings at runtime, probably through jndi names. Things like a document management server, a workflow server, etc. However I'm at a loss for how to configure custom jndi 'data sources' within wls' console. Is this possible?

    Read the article

  • Solaris 10 zlogin logs in, logs out immediately

    - by Spelevink
    On a SPARC v445 running Solaris 10 9/10, had to rebuild rpool and reattached the three existing mirrored zpools on the other existing disks, with their zfs filesystems and NG zones intact. The zones have been configured with zonecfg -z ZONENAME create etc. ... and are now online using zoneadm -z ZONENAME attach -U then simply booting after being in installed state, but I cannot zlogin to any of the zones except one. It shows that I am logged in, then a blank line, then immediately logged out again. When I try to login using zlogin -C ZONENAME I cannot; the error message is: May 15 15:43:46 <hostname> login: open_module: stat(/usr/lib/security/pam_mkhomedir.so.1) failed: no such file or directory. May 15 15:43:46 <hostname> login: load_modules: cannot open module /usr/lib/security/pam_mkhomedir.so.1 But /usr/lib/pam_mkhomedir.so.1 does not exist, and it does not exist on my other servers, but those zones are accessible using zlogin. I can only zlogin to the zones with zlogin -S ZONENAME. What to do next? Thank you.

    Read the article

  • EEE PC Keyboard malfunctioning - Ctrl key "sticks" after 10 seconds

    - by DWilliams
    I was given a EEE PC belonging to a friend of a friend to fix. The keyboard did not appear to work at all. I spent a while testing out various things, blowing the keyboard out, checking for damage, and so on. Nothing appeared to be physically wrong. At first I noticed that the keyboard appeared to work just fine for 10 seconds (on average, sometimes more sometimes less) after being powered on. It had been restored to the factory default xandros installation with no user set up, so I couldn't get in to mess with things since I couldn't type to make a user. I made an ubuntu live USB to boot it from, and managed to get the boot order changed to boot from USB in the ~10 seconds of working keyboard I had (I don't think I've ever had to rush around BIOS menus that quickly). After I got Ubuntu up on it, I played around a bit more and determined that apparently the ctrl key is stuck down (not literally, but it's on all the time). If I open gedit, pressing the "o" key brings the open dialog, "s" opens the save dialog, and all other behaviour you would expect to see if you were holding down the control key. The only exception that I noticed is the "9" and "0" keys. They function normally. Figuring that out I made a xandros user with a name/password consisting of 9's and 0's. I couldn't find any options in Xandros that could potentially be helpful. I'm not familiar with EEE PCs. Is it safe to assume that the keyboard is simply dead or could there be another problem? I don't want to purchase another keyboard for him if that isn't going to fix the problem. The netbook doesn't show any obvious signs of damage but the owner is a biker and very often has it with him on the road so it's been subjected to a good bit of vibration.

    Read the article

  • Authenticating Linked Servers - SQL Server 8 to SQL Server 10

    - by jp2code
    We have an old SQL Server 2000 database that has to be kept because it is needed on our manufacturing machines. It also maintains our employee records, since they are needed on these machines for employee logins. We also have a newer SQL Server 10 database (I think this is 2008, but I'm not sure) that we are using for newer development. I have recently learned (i.e. today) that I can link the two servers. This would allow me to access the employee tables in the newer server. Following the SF post SQL Server to SQL Server Linked Server Setup, I tried adding the link. In our SQL Server 2000 machine, I got this error: Similarly, on our SQL Server 10 machine, I got this error: The messages, though worded different, probably say the same thing: I need to authenticate, somehow. We have an Active Directory, but it is on yet another server. What, exactly, should be done here? A guy HERE<< said to check the Security settings, but did not say what else to do. Both servers are set to SQL Server and Windows Authentication mode. Now what?

    Read the article

  • CDROM does not appear on desktop, MACOS 10.5.7

    - by Cheeso
    When I pop a CDROM into the drive of my Macbook Pro, It spins up, I hear it, but no icon appears on the desktop. (I think it's 10.5.7; actually not sure how to verify this on Mac, but I think I saw a 10.5.7 flash by somewhere). In the finder preferences, I have "Show these items on the Desktop" set to show HDs, External Disks, and CDs, DVDs, and ipods. All three of those are checked. I do see the internal HD on the desktop. In Disk utility I can see the CD/DVD hardware. It says "MATSHITA DVD-R UJ-857E...". From Disk Utility I can eject the drive. But in Finder, there is never a CD/DVD listed under "Devices". When I insert a disk, nothing happens, I cannot see it. I also cannot boot from bootable CDROMs by holding C down . Suggestions? I am not very experienced with Mac; I have used Windows for years. EDIT Two updates: I saw this article on support.apple.com, and modified the hostconfig appropriately. It did not have the AUTODISKMOUNT entry, so I added one, rebooted. Same behavior. It does not see the CDROM in Finder, does not mount it on desktop. I put an old manufactured CDROM into the drive, and voila! it showed up on the desktop. The CD that does not appear is a GNome Partition Editor Live CD, which I guess is based on debian. That CD boots in other (non-Mac) PCs. I want to use this to adjust the Bootcamp partition. Suggestions?

    Read the article

  • linux hardware raid 10 / lvm / virtual machine partition alignment and filesystem optimization

    - by Jason Ward
    I've been reading everything I can find about partition alignment and filesystem optimization (ext4 and xfs) but still don't know enough to be confident in setting up my current configuration. My remaining confusion comes from the LVM layer and if I should use raid parameters on the filesystem in guest os'es. My main questions are: When I use 'pvcreate --dataalignment' do I use the stripe-width as calculated for a filesystem on RAID (128kB for ext4 in my situation), the Stripe size of the RAID set (256kB), something else altogether, or do I not need this? When I create ext2/3/4 or xfs filesystems in guests on the Logical Volumes, should I add the settings for the underlying RAID (e.g. mkfs.ext4 -b 4096 -E stride=64,stripe-width=128)? Does anyone see any glaring errors in my set up below? I'm running some benchmarks now but haven't done enough to start comparing results. I have four drives in RAID 10 on a 3ware 9750-4i controller (more details on the settings below) giving me a 6.0TB device at /dev/sda. Here is my partition table: Model: LSI 9750-4i DISK (scsi) Disk /dev/sda: 5722024MiB Sector size (logical/physical): 512B/512B Partition Table: gpt Number Start End Size File system Name Flags 1 1.00MiB 257MiB 256MiB ext4 BOOTPART boot 2 257MiB 4353MiB 4096MiB linux-swap(v1) 3 4353MiB 266497MiB 262144MiB ext4 4 266497MiB 4460801MiB 4194304MiB Partition 1 is to be the /boot partition for my xen host. Partition 2 is swap. Partition 3 is to be the root (/) for my xen host. Partition 4 is to be (the only) physical volume to be used by LVM (for those who are counting, I left about 1.2TB unallocated for now) For my Xen guests, I usually create a Logical Volume of the needed size and present it to the guests for them to partition as needed. I know there are other ways of handling that but this method works best for my situation. Here's the hardware of interest on my CentOS 6.3 Xen Host: 4x Seagate Barracuda 3TB ST3000DM001 Drives (sector size: 512 logical/4096 physical) 3ware 9750-4i w/BBU (sector size reported: 512 logical/512 physical) All four drives make up a RAID 10 array. Stripe: 256kB Write Cache enabled Read Cache: intelligent StoreSave: Balance Thanks!

    Read the article

  • Juniper’s Network Connect ncsvc on Linux: “host checker failed, error 10”

    - by hfs
    I’m trying to log in to a Juniper VPN with Network Connect from a headless Linux client. I followed the instructions and used the script from http://mad-scientist.us/juniper.html. When running the script with --nogui switch the command that gets finally executed is $HOME/.juniper_networks/network_connect/ncsvc -h HOST -u USER -r REALM -f $HOME/.vpn.default.crt. I get asked for the password, a line “Connecting to…” is printed but then the programm silently stops. When adding -L 5 (most verbose logging) to the command line, these are the last messages printed to the log: dsclient.info state: kStateCacheCleaner (dsclient.cpp:280) dsclient.info --> POST /dana-na/cc/ccupdate.cgi (authenticate.cpp:162) http_connection.para Entering state_start_connection (http_connection.cpp:282) http_connection.para Entering state_continue_connection (http_connection.cpp:299) http_connection.para Entering state_ssl_connect (http_connection.cpp:468) dsssl.para SSL connect ssl=0x833e568/sd=4 connection using cipher RC4-MD5 (DSSSLSock.cpp:656) http_connection.para Returning DSHTTP_COMPLETE from state_ssl_connect (http_connection.cpp:476) DSHttp.debug state_reading_response_body - copying 0 buffered bytes (http_requester.cpp:800) DSHttp.debug state_reading_response_body - recv'd 0 bytes data (http_requester.cpp:833) dsclient.info <-- 200 (authenticate.cpp:194) dsclient.error state host checker failed, error 10 (dsclient.cpp:282) ncapp.error Failed to authenticate with IVE. Error 10 (ncsvc.cpp:197) dsncuiapi.para DsNcUiApi::~DsNcUiApi (dsncuiapi.cpp:72) What does host checker failed mean? How can I find out what it tried to check and what failed? The HostChecker Configuration Guide mentions that a $HOME/.juniper_networks/tncc.jar gets installed on Linux, but my installation contains no such file. From that I concluded that HostChecker is disabled for my VPN on Linux? Are the POST to /dana-na/cc/ccupdate.cgi and “host checker failed” connected or independent? By running the connection over a SSL proxy I found out that the POST data is status=NOTOK (Funny side note: the client of the oh-so-secure VPN does not validate the server’s SSL certificate, so is wide open to MITM attacks…). So it seems that it’s the client that closes the connection and not the server.

    Read the article

< Previous Page | 41 42 43 44 45 46 47 48 49 50 51 52  | Next Page >