Search Results

Search found 15947 results on 638 pages for 'model quality'.

Page 450/638 | < Previous Page | 446 447 448 449 450 451 452 453 454 455 456 457  | Next Page >

  • Wireless connection by using command screen

    - by Amadeus
    I installed Ubuntu 12.04 armhf to my beagleboard-xm and now trying to connect to a wireless network. First, I checked if I can search for available networks: ubuntu@arm:~$ iwlist scan lo Interface doesn't support scanning. usb0 Interface doesn't support scanning. wlan0 Scan completed : Cell 01 - Address: EA:7D:EF:60:C9:0B Channel:1 Frequency:2.412 GHz (Channel 1) Quality=70/70 Signal level=-23 dBm Encryption key:on ESSID:"ghostrider" Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s 24 Mb/s; 36 Mb/s; 54 Mb/s Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 48 Mb/s Mode:Ad-Hoc Extra:tsf=000000005a1ab50e Extra: Last beacon: 6242ms ago IE: Unknown: 000A67686F73747269646572 IE: Unknown: 010882848B962430486C IE: Unknown: 030101 IE: Unknown: 06020000 IE: Unknown: 2A0100 IE: Unknown: 2F0100 IE: Unknown: 32040C121860 IE: Unknown: 2D1A2C181BFF00000000000000000000000000000000000000000000 IE: Unknown: 3D16010800000000FF000000000000000000000000000000 IE: Unknown: DD09001018020000000000 Then I edited /etc/network/interfaces file to the following: root@arm:/etc/wpa_supplicant# cat /etc/network/interfaces auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet dhcp # Example to keep MAC address between reboots #hwaddress ether DE:AD:BE:EF:CA:FE # WiFi Example auto wlan0 iface wlan0 inet dhcp wpa-ssid "ghostrider" wpa-psk "b34d373eb2fb836a43b0afffe783c7d0af694724506c9e77b06d1021302905bf" But I cannot still connect to the wireless network: root@arm:/etc/wpa_supplicant# iwconfig lo no wireless extensions. usb0 no wireless extensions. wlan0 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Asociated Tx-Power=20 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:on eth0 no wireless extensions. root@arm:/etc/network# ifup wlan0 Failed to bring up wlan0. What is wrong? Should I change any other files also? But I think it was enough. By the way if you are curious about where that wpa-psk came from: zero@ghostrider:~$ wpa_passphrase ghostrider 34bddf67c2 network={ ssid="ghostrider" #psk="34bddf67c2" psk=b34d373eb2fb836a43b0afffe783c7d0af694724506c9e77b06d1021302905bf } I will appreciate any effort to help. Regards, Amadeus ps: Also I tried to connect manually: root@arm:/etc/network# iwconfig wlan0 essid ghostrider key s:34bddf67c2 But this did not solve my problem also.

    Read the article

  • How do you take into account usability and user requirements for your application?

    - by voroninp
    Our team supports BackOffice application: a mix of WinForm and WPF windows. (about 80 including dialogs). Really a kind of a Swiss Army Knife. It is used by developers, tech writers, security developers, testers. The requirements for new features come quite often and sometimes we play Wizard of Oz to decide which GUI our users like the most. And it usually happens (I admit it can be just my subjective interpretation of the reality) that one tiny detail giving the flavor of good usability to our app requires a lot of time. This time is being spent on 'fighting' with GUI framework making it act like we need. And it very difficult to make estimations for this type of tasks (at least for me and most members of our team). Scrum poker is not a help either. Management often considers this usability perfectionism to be a waste of time. On the other hand an accumulated affect of features where each has some little usability flaw frustrates users. But the same users want frequent releases and instant bug fixes. Hence, no way to get the positive feedback: there is always somebody who is snuffy. I constantly feel myself as competing with ourselves: more features - more bugs/tasks/architecture. We are trying to outrun the cart we are pushing. New technologies arrive and some of them can potentially help to improve the design or decrease task implementation time but these technologies require learning, prototyping and so on. Well, that was a story. And now is the question: How do you balance between time pressure, product quality, users and management satisfaction? When and how do you decide to leave the problem with not a perfect but to some extent acceptable solution, how often do you make these decisions? How do you do with your own satisfaction? What are your priorities? P.S. Please keep in mind, we are a BackOffice team, we have neither dedicated technical writer nor GUI designer. The tester have joined us recently. We've much work to do and much freedom concerning 'how'. I like it because it fosters creativity but I don't want to become too nerdy perfectionist.

    Read the article

  • Why are my scene's depth values not being written to my DepthStencilView?

    - by dotminic
    I'm rendering to a depth map in order to use it as a shader resource view, but when I sample the depth map in my shader, the red component has a value of 1 while all other channels have a value of 0. The Texture2D I use to create the DepthStencilView is bound with the D3D11_BIND_DEPTH_STENCIL | D3D11_BIND_SHADER_RESOURCE flags, the DepthStencilView has the DXGI_FORMAT_D32_FLOAT format, and the ShaderResourceView's format is D3D11_SRV_DIMENSION_TEXTURE2D. I'm setting the depth map render target, then i'm drawing my scene, and once that is done, I'm the back buffer render target and depth stencil are set on the output merger, and I'm using the depth map shader resource view as a texture in my shader, but the depth value in the red channel is constantly 1. I'm not getting any runtime errors from D3D, and no compile time warning or anything. I'm not sure what I'm missing here at all. I have the impression the depth value is always being set to 1. I have not set any depth/stencil states, and AFAICT depth writing is enabled by default. The geometry is being rendered correctly so I'm pretty sure depth writing is enabled. The device is created with the appropriate debug flags; #if defined(DEBUG) || defined(_DEBUG) deviceFlags |= D3D11_CREATE_DEVICE_DEBUG | D3D11_RLDO_DETAIL; #endif This is how I create my depth map. I've omitted error checking for the sake of brevity D3D11_TEXTURE2D_DESC td; td.Width = width; td.Height = height; td.MipLevels = 1; td.ArraySize = 1; td.Format = DXGI_FORMAT_R32_TYPELESS; td.SampleDesc.Count = 1; td.SampleDesc.Quality = 0; td.Usage = D3D11_USAGE_DEFAULT; td.BindFlags = D3D11_BIND_DEPTH_STENCIL | D3D11_BIND_SHADER_RESOURCE; td.CPUAccessFlags = 0; td.MiscFlags = 0; _device->CreateTexture2D(&texDesc, 0, &this->_depthMap); D3D11_DEPTH_STENCIL_VIEW_DESC dsvd; ZeroMemory(&dsvd, sizeof(dsvd)); dsvd.Format = DXGI_FORMAT_D32_FLOAT; dsvd.ViewDimension = D3D11_DSV_DIMENSION_TEXTURE2D; dsvd.Texture2D.MipSlice = 0; _device->CreateDepthStencilView(this->_depthMap, &dsvd, &this->_dmapDSV); D3D11_SHADER_RESOURCE_VIEW_DESC srvd; srvd.Format = DXGI_FORMAT_R32_FLOAT; srvd.ViewDimension = D3D11_SRV_DIMENSION_TEXTURE2D; srvd.Texture2D.MipLevels = texDesc.MipLevels; srvd.Texture2D.MostDetailedMip = 0; _device->CreateShaderResourceView(this->_depthMap, &srvd, &this->_dmapSRV);

    Read the article

  • Social Networks & the Cloud

    - by kellsey.ruppel
    It’s no secret that millions of people are connected to the Internet. And it also probably doesn’t come as a surprise that a lot of those people are connected on social networking sites.  Social networks have become an excellent platform for sharing and communication that reflects real world relationships and they play a major part in the everyday lives of many people. Facebook, Twitter, Pinterest, LinkedIn, Google+ and hundreds of others have transformed the way we interact and communicate with one another. Social networks are becoming more than just an online gathering of friends. They are becoming a destination for ideation, e-commerce, and marketing. But it doesn’t just stop there. Some organizations are utilizing social networks internally, integrated with their business applications and processes and the possibility of social media and cloud integration is compelling. Forrester alone estimates enterprise cloud computing to grow to over $240 billion by 2020. It’s hard to find any current IT project today that is NOT considering cloud-based deployments. Security and quality of service concerns are no longer at the forefront; rather, it’s about focusing on the right mix of capabilities for the business. Cloud vs. On-Premise? Policies & governance models? Social in the cloud? Cloud’s increasing sophistication, security in applications, mobility, transaction processing and social capabilities make it an attractive way to manage information. And Oracle offers all of this through the Oracle Cloud and Oracle Social Network. Oracle Social Network is a secure private network that provides a broad range of social tools designed to capture and preserve information flowing between people, enterprise applications, and business processes. By connecting you with your most critical applications, Oracle Social Network provides contextual, real-time communication within and across enterprises. With Oracle Social Network, you and your teams have the tools you need to collaborate quickly and efficiently, while leveraging the organization’s collective expertise to make informed decisions and drive business forward. Oracle Social Network is available as part of a portfolio of application and platform services within the Oracle Cloud. Oracle Cloud offers self-service business applications delivered on an integrated development and deployment platform with tools to rapidly extend and create new services. Oracle Social Network is pre-integrated with the Fusion CRM Cloud Service and the Fusion HCM Cloud Service within the Oracle Cloud. Learn more how you can use Oracle Social Network to revolutionize how you create, understand, and achieve true value through enterprise social networking. And be sure to check out the follow sessions here at Oracle OpenWorld, where can learn more about Oracle Cloud and Oracle Social Network. Tuesday, Oct 2 – Oracle WebCenter’s Cloud Strategy: From Social and Platform Services to Mashups, 1:15pm - 2:15pm, Moscone West – 3001  Wednesday, Oct 3 – Oracle Social Network: Your Strategy for Socially Enabled Oracle Fusion Applications, 11:45am - 12:45pm, Moscone West – 3002/3004

    Read the article

  • Accounting for waves when doing planar reflections

    - by CloseReflector
    I've been studying Nvidia's examples from the SDK, in particular the Island11 project and I've found something curious about a piece of HLSL code which corrects the reflections up and down depending on the state of the wave's height. Naturally, after examining the brief paragraph of code: // calculating correction that shifts reflection up/down according to water wave Y position float4 projected_waveheight = mul(float4(input.positionWS.x,input.positionWS.y,input.positionWS.z,1),g_ModelViewProjectionMatrix); float waveheight_correction=-0.5*projected_waveheight.y/projected_waveheight.w; projected_waveheight = mul(float4(input.positionWS.x,-0.8,input.positionWS.z,1),g_ModelViewProjectionMatrix); waveheight_correction+=0.5*projected_waveheight.y/projected_waveheight.w; reflection_disturbance.y=max(-0.15,waveheight_correction+reflection_disturbance.y); My first guess was that it compensates for the planar reflection when it is subjected to vertical perturbation (the waves), shifting the reflected geometry to a point where is nothing and the water is just rendered as if there is nothing there or just the sky: Now, that's the sky reflecting where we should see the terrain's green/grey/yellowish reflection lerped with the water's baseline. My problem is now that I cannot really pinpoint what is the logic behind it. Projecting the actual world space position of a point of the wave/water geometry and then multiplying by -.5f, only to take another projection of the same point, this time with its y coordinate changed to -0.8 (why -0.8?). Clues in the code seem to indicate it was derived with trial and error because there is redundancy. For example, the author takes the negative half of the projected y coordinate (after the w divide): float waveheight_correction=-0.5*projected_waveheight.y/projected_waveheight.w; And then does the same for the second point (only positive, to get a difference of some sort, I presume) and combines them: waveheight_correction+=0.5*projected_waveheight.y/projected_waveheight.w; By removing the divide by 2, I see no difference in quality improvement (if someone cares to correct me, please do). The crux of it seems to be the difference in the projected y, why is that? This redundancy and the seemingly arbitrary selection of -.8f and -0.15f lead me to conclude that this might be a combination of heuristics/guess work. Is there a logical underpinning to this or is it just a desperate hack? Here is an exaggeration of the initial problem which the code fragment fixes, observe on the lowest tessellation level. Hopefully, it might spark an idea I'm missing. The -.8f might be a reference height from which to deduce how much to disturb the texture coordinate sampling the planarly reflected geometry render and -.15f might be the lower bound, a security measure.

    Read the article

  • How to deal with fellow programmer who likes to delegate task with lack any support from boss [closed]

    - by Rudy
    I have a problem with my fellow programmer. We are currently working together in a small project that need to be shipped every 2 weeks. She has a tendency to ask for help for every issues that she is facing. Whether it's a compile error, algorithm problem or even sync/merge issue that caused by herself. She does not even bother to check Google or try to find out by herself. I can be asked to help her for 5-10 times a day. Everyday her husband keeps calling (4-6 times a day), and most of the code that has been delivered by her are actually incorrect. Today she framed me for sending the wrong delivery product. She went home after lunch on the delivery day without telling PM and other team member on that day and her code she commited does not work at all. It's not even tested. I have no choice to roll back her code and cleaning her code just for sake to able to run the product. I have warned her about her defective codes for almost 3 iterations. She said when she was not around I should be able to test her module for her. I snapped and yelled that I am not her slave and directly reported to my boss. However, my boss is not a person that can manage and care about software quality. What is the most important thing to my boss is delivery of product, whether it tested or not. He can even asked us to deliver something that not even tested by QA to the client, on the next day. Most of our suggestion is not followed by him. He even asked me to apologize to her because I snapped. I am tired of the whole situation. This kind of thing keeps repeated. I do have saving to be able to survive for 6 months and the idea of resigning is keep haunting. There is nothing else that can be learned in my current job and I had been in a better environment than this. What should I do with the situation?

    Read the article

  • What ever happened to the Defense Software Reuse System (DSRS)?

    - by emddudley
    I've been reading some papers from the early 90s about a US Department of Defense software reuse initiative called the Defense Software Reuse System (DSRS). The most recent mention of it I could find was in a paper from 2000 - A Survey of Software Reuse Repositories Defense Software Repository System (DSRS) The DSRS is an automated repository for storing and retrieving Reusable Software Assets (RSAs) [14]. The DSRS software now manages inventories of reusable assets at seven software reuse support centers (SRSCs). The DSRS serves as a central collection point for quality RSAs, and facilitates software reuse by offering developers the opportunity to match their requirements with existing software products. DSRS accounts are available for Government employees and contractor personnel currently supporting Government projects... ...The DoD software community is trying to change its software engineering model from its current software cycle to a process-driven, domain-specific, architecture-based, repository-assisted way of constructing software [15]. In this changing environment, the DSRS has the highest potential to become the DoD standard reuse repository because it is the only existing deployed, operational repository with multiple interoperable locations across DoD. Seven DSRS locations support nearly 1,000 users and list nearly 9,000 reusable assets. The DISA DSRS alone lists 3,880 reusable assets and has 400 user accounts... The far-term strategy of the DSRS is to support a virtual repository. These interconnected repositories will provide the ability to locate and share reusable components across domains and among the services. An effective and evolving DSRS is a central requirement to the success of the DoD software reuse initiative. Evolving DoD repository requirements demand that DISA continue to have an operational DSRS site to support testing in an actual repository operation and to support DoD users. The classification process for the DSRS is a basic technology for providing customer support [16]. This process is the first step in making reusable assets available for implementing the functional and technical migration strategies. ... [14] DSRS - Defense Technology for Adaptable, Reliable Systems URL: http://ssed1.ims.disa.mil/srp/dsrspage.html [15] STARS - Software Technology for Adaptable, Reliable Systems URL: http://www.stars.ballston.paramax.com/index.html [16] D. E. Perry and S. S. Popovitch, “Inquire: Predicate-based use and reuse,'' in Proceedings of the 8th Knowledge-Based Software Engineering Conference, pp. 144-151, September 1993. ... Is DSRS dead, and were there any post-mortem reports on it? Are there other more-recent US government initiatives or reports on software reuse?

    Read the article

  • The difference

    So with the CTP tools available, weve been building a few apps, just to get a feel for the tools and whats supported in the framework.  Whats been great is that everything is fairly familiar and consistent, largely to do with the .net framework and Microsofts focus on providing good tools.  Weve produced mobile applications, mostly in concept form, for Windows Phone Classic, iPhone and Android but never so quickly and not of such high quality and visual impression.  I attribute some of this obviously to our familiarity to the Microsoft platform and tools.  Though when you look at the designs our team has produced, it becomes clear that this is not just another mobile application container.                                                            The Metro design language implores content prominence with fluid motion and transitions, with a crisp font and easily organized features and services placement.  In addition to a purposeful right edge tease, where the intent is for users to discover new premium content and services.   The concept that enables this is called hubs, building application with hubs changes your thinking from a single mobile application task, to thinking creatively about a mobile experience. Its engaging to think of the other brands and industry verticals that will take advantage of this core feature.  Combine this with Windows Phone 7 live tiles, more on that later, and you have a recipe for a solid mobile services platform.                                                              This so much more fun and liberating than my icon on a gridDid you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

  • Insanity&ndash;Day 1

    - by D'Arcy Lussier
    Some people do those posts about “Here’s what I’m going to do to change my life”. I don’t really like those. I’m a “don’t tell me what you’re going to do, tell me what you’re doing/have done” type of guy. So while I could say how I’m going to change my life and be healthier and happier and thinner in 60 days, I’m just going to tell you how I’m progressing through the Insanity workout. Insanity is a workout-in-a-box. It’s a collection of DVDs that you work out to. Nothing new here, except that the program is intense. It’s core tenet of the program is intensity – you workout at an elevated heart rate for 3 minutes with a short break in between, as opposed to traditional interval training where you go hard for a short time and recover for a few minutes. The other aspect of it is commitment. There is a timetable to follow – you workout 6 days a week with one rest day. This isn’t meant to be a “pick it up whenever you feel like it” type of program. The videos themselves are kind of…I don’t want to say low quality, but not as polished as I expected. Maybe that’s what they were going for. By that I mean they show shots of cameramen and the production equipment during the workout. Otherwise, it’s the Insanity leader Shawn T. leading a group of pretty fit folks through this gruelling workout. And ultimately, those little production nit-picks are irrelevant compared to the actual workout. Holy crap. I haven’t done an aerobics class in like…ever. And watching the video before my actual workout, I thought “That doesn’t look too hard”. Believe me, it is. No weights, no machines, just various exercises done in circuits and with increasing speed. By the end of the workout, I was drenched. So that was day one. Some stats just so I can track it: I’m 286 lbs at my last weigh-in a week ago or so. Should be interesting to see what 60 days of this does! D

    Read the article

  • WiFi on Ubuntu 12.04 custom: downloading unbearably slow

    - by Mark
    iwconfig reports 11 Mbps, yet I've seen as low as <1 KBps. This is the latest in my laundry list of Ubuntu problems in a dual-boot machine (cyberpowerpc custom, intel i7-3820, nvidia gtx 570). I received it two days ago, Windows 7 running fine, still having problems with Ubuntu. The browsing is intermittent but unacceptable. e.g. I could get to this site last night but I couldn't post this question. The downloading is unbearably slow, I can't download anything or install any packages because the speed is so slow. e.g. I am trying to install vim which is inexplicably missing from my 12.04 install (add another one to the problems list) and my download speed reported in the terminal was 241 B/s. Yes, bytes. iwconfig reports 11 Mbps, which further adds to the confusion. User@ubuntu:~$ iwconfig lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:"linksys" Mode:Managed Frequency:2.437 GHz Access Point: 00:18:39:76:2C:A1 Bit Rate=11 Mb/s Tx-Power=20 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=36/70 Signal level=-74 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:54 Invalid misc:18 Missed beacon:0 eth0 no wireless extensions. Any ideas? I see this is a problem a lot of people, but none of the on line solutions have worked for me so far. e.g. one site recommends editing the ath9k.conf file in /etc/modprobe.d, yet this file isn't even in the folder: User@ubuntu:/$ cd etc/modprobe.d User@ubuntu:/etc/modprobe.d$ ls alsa-base.conf blacklist-oss.conf blacklist-ath_pci.conf blacklist-rare-network.conf blacklist.conf blacklist-watchdog.conf blacklist-firewire.conf dkms.conf blacklist-framebuffer.conf nvidia-current_hybrid.conf blacklist-modem.conf nvidia-graphics-drivers.conf I think the nvidia gpu might be mucking things up. I had the "blinking cursor" problem when installing in the first place, and then I had the monitor out of range problem as well. I have my faithful Asus laptop, which is running Ubuntu 12.04 just fine. The only difference is executing host -t SOA local in the terminal gives User@ubuntu:~$ host -t SOA local local has SOA record local. nobody.localhost. 42 86400 43200 604800 10800 in my new machine, and the command reports Host local. not found in the laptop. Help would be most welcome, as I am in danger of reverting back to Windows. I'm seriously considering it. Sorry for the length, trying to show my effort in resolving the issue and include terminal snippets that might be helpful.

    Read the article

  • How bad does it look to have left a job soon after starting? [closed]

    - by unitedgremlin
    I have a job I would like to leave. On advice from friends and parents I have stayed. Their primary concern is that it would look bad on my resume if I left only after a few months of joining. My concerns with the job are as follows: When I started it was preferred I provide and use my own equipment. Could be out of business in a few months from lack of cash flow Poor code quality: memory leaks and lack of error handling. The same mistakes continue to be made even though I have raised the issue. It has become evident that co-workers do not understand memory management rules of the platform and are not interested in learning them. Yet, there is still surprise from them when strange bugs continue to crop up. As a result don't feel I will learn from co-workers. Plus, fixing the the lingering bugs and trying to keep up on new feature development is like a game of whack-o-mole that never ends. I don't believe in the companies vision or its ability to execute on the ideas anymore. My ideas and suggestions for very small tweaks are quickly dismissed. And so more than half or so have come back as bugs that we end up needing to address. I have been told to wait on fixing bugs in codes until we can talk to the original author. I don't feel I am allowed to take initiative to just fix/change things and do what I think is best. Everything needs consensus even for a bug fix before any work is done. I am adopting a shut-up and just do what I am told approach to save myself from ulcers. Lots of meetings (I am personally not involved in all of them which is good) but the sheer amount reminds me of days at a big corporation. Why is everyone around me always meeting? It's a small company. I can count everyone on my toes and fingers. I can say with certainty I have no interest in working with any of them again. This is the first time I have truly worked with a group of so called "B and C players". Ultimately, I think it is my fault for not doing a better job evaluating the team and company before joining. But I have generated a better set of questions when probing companies in the future. My questions are: How bad does it look to have left a job soon (few months) after starting? What would be the best way to explain my concerns and reasons for leaving without badmouthing the company? Should I stick it out to what I believe will be the soon end of the company?

    Read the article

  • Strangling the life out of Software Testing

    - by MarkPearl
    I recently did a course at the local university on Software Engineering. At the beginning of the course I looked over the outline of the subject and there seemed to be some really good content. It covered traditional & agile project methodologies, some general communication and modelling chapters and finished off with testing. I was particularly excited to see the section on testing as this was something I learnt on my own and see great value in. The course has now just ended and I am very disappointed. I now know one of the reasons why so few people i.e. in my region do Test Driven Development, or perform even basic testing methodologies. The topic was to academic! Yes, you might be able to list 4 different types of black box test approaches vs. white box test approaches and describe the characteristics of Smoke Tests, but never during course did we see an example of an actual test or how it might be implemented! In fact, if I did not have personal experience of applying testing in actual projects, I wouldn’t even know what a unit test looked like. Now, what worries me is the following… It took us 6 months to cover the course material, other students more than likely came out of that course with little appreciation of the subject – in fact they now have a very complex view of what a test is – so complex that I think most of them will never attempt it again on their own. Secondly, imagine studying to be a dentist without ever actually seeing a tooth? Yes, you might be able to describe a tooth, and know what it is made out of – but nobody would want a dentist who has never seen a tooth to operate on them. Yet somehow we expect people studying software engineering to do the same? This is not right. Now, before I finish my rant let me say that I know this is not the same everywhere in the world, and that there needs to be a balance on practical implementation and academic understanding – I am just disappointed that this does not seem to be happening at the institution that I am currently studying at ;-( Please, if you happen to be a lecturer or teacher reading this post – a combination of theory and practical's goes a long way. We need to up the quality of software being produced and that starts at learner level!

    Read the article

  • Should we persist with an employee still writing bad code after many years?

    - by user94986
    I've been assigned the task of managing developers for a well-established company. They have a single developer who specialises in all their C++ coding (since forever), but the quality of the work is abysmal. Code reviews and testing have revealed many problems, one of the worst being memory leaks. The developer has never tested his code for leaks, and I discovered that the applications could leak many MBs with only a minute of use. User's were reporting huge slowdowns, and his take was, "it's nothing to do with me - if they quit and restart, it's all good again." I've given him tools to detect and trace the leaks, and sat down with him for many hours to demonstrate how the tools are used, where the problems occur, and what to do to fix them. We're 6 months down the track, and I assigned him to write a new module. I reviewed it before it was integrated into our larger code base, and was dismayed to discover the same bad coding as before. The part that I find incomprehensible is that some of the coding is worse than amateurish. For example, he wanted a class (Foo) that could populate an object of another class (Bar). He decided that Foo would hold a reference to Bar, e.g.: class Foo { public: Foo(Bar& bar) : m_bar(bar) {} private: Bar& m_bar; }; But (for other reasons) he also needed a default constructor for Foo and, rather than question his initial design, he wrote this gem: Foo::Foo() : m_bar(*(new Bar)) {} So every time the default constructor is called, a Bar is leaked. To make matters worse, Foo allocates memory from the heap for 2 other objects, but he didn't write a destructor or copy constructor. So every allocation of Foo actually leaks 3 different objects, and you can imagine what happened when a Foo was copied. And - it only gets better - he repeated the same pattern on three other classes, so it isn't a one-off slip. The whole concept is wrong on so many levels. I would feel more understanding if this came from a total novice. But this guy has been doing this for many years and has had very focussed training and advice over the past few months. I realise he has been working without mentoring or peer reviews most of that time, but I'm beginning to feel he can't change. So my question is, would you persist with someone who is writing such obviously bad code?

    Read the article

  • Differences between a retail and wholesale website, and how difficult would it be to integrate them? [closed]

    - by kmy
    I was told to come here for some guidance, I know that my questions can be quite broad, but I just really want some kind of direction to go towards (links, articles, etc). So here it goes: For the past month I have been planning and started implementing a wholesale website, but plans got changed on me and I need to allow both retail and wholesale orders which will also depend on whether the account is a regular customer or also has a seller account. There are various types of products and it has been decided that I would use subcategories as tables to organize them and allow various specific item fields. So here are some of my specific questions: How different is the database structure for each item to be available for both wholesale and retail? Will it just be adding a quantity column and have two different pricing, or much more complicated? I am unaware if there's any price tables but would that be more difficult? They use Quickbooks POS software, how difficult/inefficient will it be to update inventory quantities if they have like 2000-4000 products? And what would be the best ways to extract the information and update the system? I know it export an excel spreadsheet so maybe a suggested php plugin for it? How difficult is this project in your professional opinion, and how big should a team usually be? (At the moment it is just me.) Projected time for planning, implementation, and quality assurance in accordance to team size? I am an entry level developer and I know that I do not have enough knowledge to direct myself on this website...What kind of web developer skills will I need to find to help me? (My company is willing to hire people to get this website done as fast as possible.) Also, what would be some great questionnaires to ask the product stakeholder about what he wants from the website? (He has made it clear he is neither computer or internet savvy...) Sorry for the amount of questions, I'm an entry level web developer and do not have a senior to look up to for guidance. I have knowledge in HTML, CSS, Javascript, jQuery, PHP, MySQL, phpMyAdmin. I have never used any frameworks like Zend, Magento, etc, and is doing this all from scratch. So far the website is built in an object oriented way, MVC architecture to the best of my abilities, but I have many doubts because I would really want to have this done right. If I have been unclear on some parts please tell me and I'll add more detail. I'm sure I'll have more additional questions later on, if anyone is open to that please tell me. Thanks in advance!

    Read the article

  • ??????????????????

    - by kazun
    2012 ? 8 ? 9 ???????????? ?? 13F ??????????????????????? DB ???????????????????????????????????????????????????????·????????????·??????????Exadata ?????????? Hybrid Columnar Compression(HCC)?????????????????????????????? (1)?????????????????IT????????????? ?????????????·??????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????IT???????????????????ZFS Storage Appliances ????????100Petabytes ??(8 ? 9 ???)? ZFS Storage ?????????????????????????????????????????????????????????????????????? (2)????????????????????????????? ??????????? VTR ???????????????????? EOL(End of Life)????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????? ?????????7 ??????????? StorageTek SL150 ??????????????????????????450TB(????)?30~300 ????????????????????????? 10.1TB?????????????????????????????????????????????????????????????????????????????? ??:StorageTek SL150(????????????) ?????????????????????????????????????????????????????????? (3)Oracle????????????????????????? ??????(????????)????????????????????????????????????????????????Sun ZFS Storage Appliance?????????????????????????????Sun ZFS Storage Appliance ?Pillar Axiom ???????????????????????????? ?????????Oracle Database?????????????????????????????????????????? Database ????????? Hybrid Columnar Compression / Snapshot?Clone????????????????DB???????? I/O Quality of Services?????????DB??? ????? ???Optimized Solutions????Oracle??????(??????????????????)????????????????????????????????Exadata ?? InfiniBand ?????????????????1?????? ??????????????????????????????????????????????Oracle Database ? Exadata ?????????????????????????? Oracle ?????????????????????? Sun ZFS Storage 7120 Appliance ??????????????????????? ??:Sun ZFS Storage 7120 Appliance (4)?????????Oracle Database ??????????????? “Hybrid Columnar Compression (HCC) ” ????????????? HCC??????????????????????????????????????????????????? I/O ????????????????????????????????????????????Oracle Database ???? HCC ??????????????? ?????:?Oracle ????·???? 2009?12? Exadata Hybrid Columnar Compression? ?????????Sun ZFS Storage Appliance ?Pillar Axiom ?????????4??????HCC??????????????????? HCC ???????? HCC ???????? Exadata ? DataGuard ?????HCC ?????????????????????? Exadata ??????????????·??????????????? DB ??????? HCC ?????? ?????????????????????????HCC ?????????????????????????????????? ?????????? HCC ?????????????????????ZFS Storage Appliance ? Pillar Axiom ?????????????????????? 6 ?????????????????????????????????????? ¦???????? ???????????

    Read the article

  • Disabling standby modus on Gear4 Blackbox speakers

    - by cj
    I have a set of bluetooth Gear4 Blackbox speakers. The sound quality and the design is great, but it switches to standby modus automatically every now and then, when I am listening to music and when it's silent. In that situation, the only way to get them working again is turning them off and on, since they do not react to the remote nor to the buttons on top of it. I emailed Gear4 with this problem and they recommended me to reflash the firmware again, but the problem is persisting after having done that. It has nothing to do with the device that is streaming music. So, the question is, is there a way to disable the standby modus permamently, so the speakers are all the time active even if I am not using them? To switch them off I would just turn the power switch off. If anyone is curious about what device I am talking about, here's a link to Amazon, but I wouldn't reccomend anyone to buy them because of this problem. http://www.amazon.co.uk/Gear-4-PG142-GEAR4-BlackBox/dp/B000QEFZI2 Thanks in advance.

    Read the article

  • Skype performance in IPSEC VPN

    - by dunxd
    I've been challenged to "improve Skype performance" for calls within my organisation. Having read the Skype IT Administrators Guide I am wondering whether we might have a performance issue where the Skype Clients in a call are all on our WAN. The call is initiated by a Skype Client at our head office, and terminated on a Skype Client in a remote office connected via IPSEC VPN. Where this happens, I assume the trafficfrom Client A (encrypted by Skype) goes to our ASA 5510, where it is furtehr encrypted, sent to the remote ASA 5505 decrypted, then passed to Client B which decrypts the Skype encryption. Would the call quality benefit if the traffic didn't go over the VPN, but instead only relied on Skype's encryption? I imagine I could achieve this by setting up a SOCKS5 proxy in our HQ DMZ for Skype traffic. Then the traffic goes from Client A to Proxy, over the Skype relay network, then arrives at Cisco ASA 5505 as any other internet traffic, and then to Client B. Is there likely to be any performance benefit in doing this? If so, is there a way to do it that doesn't require a proxy? Has anyone else tackled this?

    Read the article

  • Laptop choice for development: MacBook Pro 17 vs Dell Studio XPS 16 vs HP Envy 15

    - by Shalan
    Hey! First things first - let me state that I am not intending to play games on this - I have narrowed down to these 3 purely based on specs and its individual brand reliability in the market. I intend to primarily use: Visual Studio 2008 Pro a lot (develop and deploy on Windows platforms) SQL Server 2005 Oracle 10g Adobe Photoshop CS4 Microsoft Expression Studio Google Sketchup I currently use a desktop PC (Core2Duo 2.66Ghz with 3GB DDRII memory) running Vista Business 32-bit - and I have to admit that, especially for Visual Studio, its quite sluggish to a point where it affects productivity. Furthermore, I intend to only use the notebook on a table - with a cooled surface, like granite :) - so I would appreciate people's input with regard to heat issues. Im aware that the Dell's primary exhaust gets blocked by the lid when open, but some reviews don't seem to place extraordinary emphasis on heat issues resulting from this. My options for the Dell/Alienware: Core i7 720QM 4GB DDRIII memory ATI mobility 3670 (512) 128GB Solid State Drive 16-inch Full HD RGB-LED LCD display (1080p) 3-year next-business-day support My configuration for the Apple MBP: Core2Duo 2.8Ghz (Im assuming the T9600) 4GB DDRIII memory 128GB Solid State Drive standard 1 year support The one advantage I think of with the MBP is that I can have the addition of OSX (though Im unsure what I would use it for, but purely to play around with a much-boasted-about OS) What are your thoughts on this, especially regarding build-quality, heat, performance and battery-life? Much thanks! ~shalan

    Read the article

  • Linksys/Cisco Small Business SRW-Series (ie SRW248G4) - Overcoming the Limitations

    - by Warren P
    We just purchased a Cisco/Linksys SRW 248G4 switch to try it out. We have always had unmanaged switches before, and this is our first "somewhat managed" switch. So far the major limitations are: Only Internet Explorer 6 (manual says IE 5.5!) works for the web interface SSH exists but is not practically useable because the only key length that is supported is no longer even used by most modern SSH installs. (I get the error "RSA modulus too small" in openssh 4.x/5.x) This is with the latest firmware revision, I believe, although Cisco's website does not actually tell you what version you're downloading. All in all, I think, they must be trying to tell me that if I want a good-quality switch, I shouldn't buy these SRWs and should buy a Dell or an HP ProCurve, or save up my pennies, and buy a Catalyst. The question here, then, at long last: Has anyone gotten the web-browser to work via some IE 7 or IE 8 compatibility mode settings or used another browser (Opera? KDE/Safari/WebKit?) and spoofed IE6? Is there any way to get the SSH key length upgraded? I'm guessing a 0% chance of a yes on that last one. I found an XP machine, used telnet (via PuttyTel.exe) and IE6 to set this up, and I doubt we'll have to touch it again. Which is fine with us. But it would be nice if I could administer this thing from either (a) a linux box, or (b) my primary desktop which is windows 7. It looks like XPMode with IE6 on the virtual XP machine may be my only way to administer this type of switch via the web.

    Read the article

  • Viewing a large-resolution VNC server through a small-resolution viewer in Ubuntu

    - by Madiyaan Damha
    I have two Ubuntu computers, one with a large screen resolution (1920x1600) that is running default ubuntu vnc server. I have another computer that has a resolution of about 1200x1024 that I use to vnc into the server (I use the default ubuntu vnc viewer). Now everything works fine except there are annoying scrollbars in the viewer because the server's desktop resolution is so much higher than the viewer's. Is there a way to: 1) Scale the server's desktop down to the viewer's resolution. I know there will be a loss of image quality, but I am willing to try it out. This should be something like how windows media player or vlc scales down the window (and does some interpolation of pixels). 2) Automatically shrink the resolution of the server to the client's when I connect and scale the resolution back when I disconnect. This seems like a less attractive solution. 3) Any other solution that gurus out there use? I am sure someone has experienced this before (annoying scroll bars) so there must be a solution out there. Thanks,

    Read the article

  • MediaWiki Math Extension Out of Sync

    - by kfmfe04
    I am trying to run MediaWiki 1.19.2 on Ubuntu Linux (3.0.0-26-generic #42-Ubuntu AMD 64). It installs fine via tar.gz, however, I run into problems when trying to install the Math extension (via git clone from its repository). I get the following error in the Apache logs: PHP Fatal error: Call to undefined method FSFileBackend::getRootStoragePath() in /var/www/abc.com/html/mediawiki-1.19.2/extensions/Math/Math.body.php on line 361, referer: http://intra.abc.com/wiki/index.php?title=Quality&action=submit so apparently, the latest Math extension is out-of-sync with MediaWiki 1.19.2; the latest Math extension is apparently using post-1.19.2 methods. I tried looking through the git logs for some indication (a tag, perhaps?) of which revision of Math worked with 1.19.2, but no luck. Anyone have any suggestions? Thanks in advance. Edit: Just my luck - after posting this message, I found this link. I think this version should do the job. Consider this question closed/answered.

    Read the article

  • What is the best / latest software to convert DVD recorder disc to YouTube?

    - by Jian Lin
    I recorded some Wii gameplay to a DVD-R using a DVD recorder, and tried using Handbrake to convert it to YouTube compatible format. Basically, it needs resizing to 16:9, and selecting 00:03 to 3:10 of the chapter (out of the 7 minutes). It seems Handbrake can't do it for 480p... and if using AutoGK and then VirtualDub to resize and do video time selection, it feels so old school (autogk not updated since 2005)... Windows Movie Maker seems like 15fps video quality... Is there a way to do it nicely? Details if using Handbrake: I can't find a way to convert a DVD recorded video which is 720 x 480 (Wii Gameplay in 16 : 9 ratio) into 852 x 480... It seems that the only possible resize is to shrink but not to expand? It is fine to make it 720 x 406... except YouTube won't be able to show it as 480p... If it can be made 852 x 480, then YouTube can at least show it as 480p (besides 360p and 240p)... is there any way to do it? thanks.

    Read the article

  • HLS video segmenting complications. How to create a transport stream with ffmpeg

    - by Agzam
    I have h264 videos, and currently we're using Apple's HTTP Video Streaming tools and mediafilesegmenter to segment these files. What I need to do is to switch to alternative segmenter based on this very popular open-sourced segmenter The problem is that this segmenter does not just take any video, but takes only MPEG-TS videos. So I have to convert my h264 videos to TS first. I can do that with ffmpeg. I'm using this: ffmpeg -i encoded.mp4 -vcodec h264 -i encoded.mp4 -sameq -acodec aac -strict experimental -f mpegts output.ts But this creates fairly larger output. And the reason is that Apple's segmenter keeps the same codec - AVC and the same audio codec - AAC, whereas ffmpeg changes video format to MPEG Video. The question is: can I somehow keep the same AVC video codec and still convert video to a transport stream? So my goal is to keep the same video quality and same video codecs as Apple's medifilesegmenter does. UPD: Okay... it seems that ffmpeg CAN split videos into segments: ffmpeg -i encoded.mp4 -c copy -map 0 -vbsf h264_mp4toannexb -f segment -segment_time 10 -segment_list test.m3u8 -segment_format mpegts segment%d.ts That's still has one problem: it doesn't create http live streaming index file. (-segment_list creates a file with list of segments, but it doesn't look like HLS index). So, you still have to create index file

    Read the article

  • Free or Open Solution for Storing and Charting CSV data

    - by rrrfusco
    I'm presently storing CSV files, combining them, opening them in open office, creating pivot tables and then generating charts from the spreadsheet. I've looked at OOBase, but appending csv files to base is clunky for some reason. SQLite seems like a good database solution, but I've haven't found a good charting program that connects to it with ease. Although open office (or libreoffice) maintains the references and allows you to update the information, this process is far from efficient. There are too many steps and it seems one program should handle all of these tasks. A better program would be more intuitive, allow you to simply add inserts into a database, and include an interface for standard charting settings. EDIT Simplest Automated Analysis and Chart Generation Tool? The above answer references Spotfire and Tableau, each of which has a free 14 and 30 day trial. Each program is nicely streamlined and designed. I'm looking for a program between this quality and LibreOffice. Can you recommend a better open or free desktop solution for windows?

    Read the article

  • Convert DVD Movie to MPEG and view on PS3 via Windows Media Server 12

    - by Vidar
    I think Apollo spacecraft missions to the moon were easier than this! I have tried dozens of DVD ripping software and media servers and have had limited success in trying to convert all my DVDs into file format so they can be viewed on PS3. I have also been on dozens of forums and it's all getting a bit confusing, some advice is out of date, some software is no longer updated - updates have been applied to PS3 operating system and windows and so on and so on. There has to be a way to get all this knowledge and information in one place that's up to date so people can do the same thing as me. Can anyone give me some definitive software and/or advice to do the following: I have over 200 DVDs - I want to convert these to VOB files (rename to MPEG so WMS can stream them). Store on hard disk and view via Windows Media Server 12 (Windows 7). I will then be able to view these via my PS3 in my lounge and never have to get out another DVD case again. I don't want to encode to any other format like MP4 with H.264 because I will lose some of the original quality. So MPEG-2 is fine for me. Note: I have been using DVD Shrink but it gives odd results sometimes. The main problem being that once the DVD has been ripped - WMS shows the wrong playing length of the film, however if I use VLC Media Player it will play through the whole film OK. This is obviously no good when it comes to streaming on the PS3.

    Read the article

< Previous Page | 446 447 448 449 450 451 452 453 454 455 456 457  | Next Page >