Search Results

Search found 13347 results on 534 pages for 'embedded device'.

Page 452/534 | < Previous Page | 448 449 450 451 452 453 454 455 456 457 458 459  | Next Page >

• fdisk shows overlapping partitions

  - by Campa

  At every boot to start Ubuntu, a partition gets re-mounted more than 1 times, sometimes causing very long boots. Example below: > dmesg ... [ 21.472020] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro ... [ 42.021537] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0 ... I suspect there is a problem of overlapping partitions here, regarding sda4 and sda5: > sudo fdisk -l Device Boot Start End Blocks Id System /dev/sda1 63 610469 305203+ de Dell Utility /dev/sda2 612352 32069631 15728640 7 HPFS/NTFS/exFAT /dev/sda3 * 32069632 238979788 103455078+ 7 HPFS/NTFS/exFAT /dev/sda4 238983166 625141759 193079297 5 Extended /dev/sda5 238983168 612630527 186823680 83 Linux /dev/sda6 612632576 625141759 6254592 82 Linux swap / Solaris Further details: > more /etc/fstab ... # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda6 during installation UUID=b33be99b-5c9e-449e-ad48-be608aeff001 / ext4 errors=remount-ro 0 1 # swap was on /dev/sda7 during installation UUID=7c9071cc-b77b-40da-9f80-6b8a9a220cb1 none swap sw and > mount /dev/sda5 on / type ext4 (rw,errors=remount-ro,commit=0) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) fusectl on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) udev on /dev type devtmpfs (rw,mode=0755) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755) none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880) none on /run/shm type tmpfs (rw,nosuid,nodev) binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev) gvfs-fuse-daemon on /home/piero/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=piero) I am Running Ubuntu Oneiric + LXDE on Dell Studio XPS machine 64-bit, dual booting with Windows 7. A months ago, I resized the Ubuntu partition and maybe I messed up something by doing that. Do you have any idea, why this long booting is happening?

  Read the article

• Moms on Mobile: Are They Way Ahead of You?

  - by Mike Stiles

  You may have no idea how much and how fast moms are embracing mobile. Of all the demographics that can be targeted by marketers, moms have always been at or near the top of the list. And why not? They’re running households, they’re all over town, they’re making buying decisions, and they’re influencing family and friends. They, out of necessity, become masters of efficiency and time management. So when a technology tool, like mobile, comes along that assists with that efficiency and time management, we would obviously expect them to take advantage of it. So if it’s obvious, why are so many big, sophisticated brands left choking on the dust of moms who have zoomed past them in the adoption of mobile, and social on mobile? Let’s break down some hard truths as presented by a Mojiava report: -Moms spend 6.1 hours per day on average on their smartphones – more than magazines, TV or radio. -46% took action after seeing a mobile ad. -51% self-identify as “addicted” to their smartphone. -Households with an income of $25K-$50K have about the same mobile penetration among moms as those with incomes of $50K-$75K. So mobile is regarded as a necessity for middle-class moms. -Even moms without smartphones spend 2.5 hours on average per day on some connected mobile device. -Of moms with such devices, 9.8% have an iPad, 9.5% a Kindle and 5.7% an iPod Touch. -Of tablet-owning moms, 97% bought something using their tablet in the last month. -31% spend over 10 hours per week on their tablet, but less than 2 hours per week on their PCs. -62% of connected moms use shopping apps. -46% want to get info on their mobile while in a store. -Half of connected moms use social on their mobile. And they’re engaged. 81% are brand fans, 86% post updates, and 84% comment. If women and moms are one of your primary targets and you find yourself with no strong social channels where content is driving engagement and relationship-building, with sites not optimized for mobile, or with no tablet or smartphone apps, you have been solidly left behind by your customers and prospects. And their adoption of mobile and social on mobile is only exponentially speeding up, not slowing down. How much sense does it make when your customer is ready to act on your mobile ad, wants to user your iPad app to buy something from you, wants to be your fan on Facebook, wants to get messages and deals from you while they’re in your store…but you’re completely absent? I’ll help you cheat on the test by giving you the answer…no sense at all. Catch up to momma.

  Read the article

• ArchBeat Link-o-Rama for 10-24-2012

  - by Bob Rhubart

  Play Oracle Vanquisher Here's a little respite from whatever it is you normally spend your time on. Oracle Vanquisher is an online diversion that makes a game of data center optimization. According to the description: "Armed with a cool Oracle vacuum pack suit and a strategic IT roadmap, you will thwart threats and optimize your data center to increase your company’s stock price and boost your company's position." Mainly you avoid electric shock and killer birds. The current high score belongs to someone identified as "TEN." My score? Never mind. Book: DevOps for Developers | The Java Source The subject of DevOps has come up in a couple of recent OTN ArchBeat Podcasts, so it's somewhat serendipitous that Tori Weildt's recent blog post offers an overview of Java Champion Michael Hutterman's new book, DevOps for Developers, now available from Apress. Bring Your Own Device (BYOD) : Context is everything… | The ORACLE-BASE Blog BOYD is a factor in the evolution of IT, but in what context? "The real IT work in companies is still being done on PCs," says Oracle ACE Director Tim Hall. "Yes, you can use a cloud service on your phone, but look around the office and you will see those cloud services are actually being used by people on PCs." Oracle in the Cloud: Oracle EBusiness Suite sizing | Tom Laszewski Cloud expert Tom Laszewski shares several technical resources that will be helpful for sizing of Oracle EBusiness Suite. Setting Up, Configuring, and Using an Oracle WebLogic Server Cluster Author and expert Yuli Vasiliev shows you how take advantage of multiple Oracle WebLogic Server instances grouped into a cluster to maximize scalability and availability. Webcast: Reduce Costs with Oracle's Database Storage Management Watch this! Join Oracle experts Kevin Jernigan and Margaret Hamburger for an interactive webcast in which you'll learn how Oracle's Database Storage Management can reduce storage costs and management complexity while improving query performance to meet service-level agreements and compliance requirements. Event Date: Tuesday, November 6, 2012 Event Time: 10 a.m. PT/1 p.m. ET Thought for the Day "Most software today is very much like an Egyptian pyramid with millions of bricks piled on top of each other, with no structural integrity, but just done by brute force and thousands of slaves." — Alan Kay Source: softwarequotes.com

  Read the article

• Rendering Texture Quad to Screen or FBO (OpenGL ES)

  - by Usman.3D

  I need to render the texture on the iOS device's screen or a render-to-texture frame buffer object. But it does not show any texture. It's all black. (I am loading texture with image myself for testing purpose) //Load texture data UIImage *image=[UIImage imageNamed:@"textureImage.png"]; GLuint width = FRAME_WIDTH; GLuint height = FRAME_HEIGHT; //Create context void *imageData = malloc(height * width * 4); CGColorSpaceRef colorSpace = CGColorSpaceCreateDeviceRGB(); CGContextRef context = CGBitmapContextCreate(imageData, width, height, 8, 4 * width, colorSpace, kCGImageAlphaPremultipliedLast | kCGBitmapByteOrder32Big); CGColorSpaceRelease(colorSpace); //Prepare image CGContextClearRect(context, CGRectMake(0, 0, width, height)); CGContextDrawImage(context, CGRectMake(0, 0, width, height), image.CGImage); glGenTextures(1, &texture); glBindTexture(GL_TEXTURE_2D, texture); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_NEAREST); glTexImage2D(GL_TEXTURE_2D, 0, GL_RGBA, width, height, 0, GL_RGBA, GL_UNSIGNED_BYTE, imageData); glTexParameterf(GL_TEXTURE_2D, GL_TEXTURE_WRAP_S, GL_CLAMP_TO_EDGE); glTexParameterf(GL_TEXTURE_2D, GL_TEXTURE_WRAP_T, GL_CLAMP_TO_EDGE); Simple Texture Quad drawing code mentioned here //Bind Texture, Bind render-to-texture FBO and then draw the quad const float quadPositions[] = { 1.0, 1.0, 0.0, -1.0, 1.0, 0.0, -1.0, -1.0, 0.0, -1.0, -1.0, 0.0, 1.0, -1.0, 0.0, 1.0, 1.0, 0.0 }; const float quadTexcoords[] = { 1.0, 1.0, 0.0, 1.0, 0.0, 0.0, 0.0, 0.0, 1.0, 0.0, 1.0, 1.0 }; // stop using VBO glBindBuffer(GL_ARRAY_BUFFER, 0); // setup buffer offsets glVertexAttribPointer(ATTRIB_VERTEX, 3, GL_FLOAT, GL_FALSE, 3*sizeof(float), quadPositions); glVertexAttribPointer(ATTRIB_TEXCOORD0, 2, GL_FLOAT, GL_FALSE, 2*sizeof(float), quadTexcoords); // ensure the proper arrays are enabled glEnableVertexAttribArray(ATTRIB_VERTEX); glEnableVertexAttribArray(ATTRIB_TEXCOORD0); //Bind Texture and render-to-texture FBO. glBindTexture(GL_TEXTURE_2D, GLid); //Actually wanted to render it to render-to-texture FBO, but now testing directly on default FBO. //glBindFramebuffer(GL_FRAMEBUFFER, textureFBO[pixelBuffernum]); // draw glDrawArrays(GL_TRIANGLES, 0, 2*3); What am I doing wrong in this code? P.S. I'm not familiar with shaders yet, so it is difficult for me to make use of them right now.

  Read the article

• kubuntu: wireless manager can't find any networks

  - by timuçin

  I just installed Kubuntu 12.10 and as I knew my wireless driver would not be recognized, I installed it manually through here. I suppose I shall mention that I also had to do this. The driver worked just fine until I restarted my system. Since then I can't even start over. My wireless card is realtek 8723 The oly lead I have is this piece of log: 11/14/12 07:35:21 AM timucin-W150ER NetworkManager[989] <info> wpa_supplicant started 11/14/12 07:35:21 AM timucin-W150ER NetworkManager[989] <info> (wlan0) supports 4 scan SSIDs 11/14/12 07:35:21 AM timucin-W150ER NetworkManager[989] <info> (wlan0): supplicant interface state: starting -> ready 11/14/12 07:35:21 AM timucin-W150ER NetworkManager[989] <info> (wlan0): device state change: unavailable -> disconnected (reason 'supplicant-available') [20 30 42] 11/14/12 07:35:21 AM timucin-W150ER NetworkManager[989] <warn> Trying to remove a non-existant call id. 11/14/12 07:35:21 AM timucin-W150ER NetworkManager[989] <info> (wlan0): supplicant interface state: ready -> inactive 11/14/12 07:35:21 AM timucin-W150ER NetworkManager[989] <info> (wlan0) supports 4 scan SSIDs I feel really bad that I have been trying so many things and even while I am trying them I get a problem at every step. I am really frustrated. You can the time in the logs, I didn't get up early. Just needed to share my feelings. Even the ethernet cable I have use is short for God's sake, I have had to sit at this massively uncomfortable posture for hours. edit: I discovered something interesting. When I boot my windows I see that my wireless manager says "disconnected" now. However when I start ubuntu after windows and modprobe rtl8723e wireless works just fine. Then again, when I restart ubuntu I am back where I have started. So now I have to start windows, restart my machine and do the modprobe thing to see wireless networks.

  Read the article

• Mousin' down the PathListBox

  - by T

  While modifying the standard media player with a new look and feel for Ineta Live I saw a unique opportunity to use their logo with a dotted I with and attached arc as the scrub control. So I created a PathListBox that I wanted an object to follow when a user did a click and drag action.  Below is how I solved the problem.  Please let me know if you have improvements or know of a completely different way.  I am always eager to learn. First, I created a path using the pen tool in Expression Blend (see the yellow line in image below).  Then I right clicked that path and chose [Path] --> [Make Layout Path].   That created a new PathListBox.  Then I chose the object I want to move down the new PathListBox and Placed it as a child in the Objects and Timeline window (see image below).  If the child object (the thing the user will click and drag) is XAML, it will move much smoother than images. Just as another side note, I wanted there to be no highlight when the user selects the “ball” to drag and drop.  This is done by editing the ItemContainerStyle under Additional Templates on the PathListBox.  Post a question if you need help on this and I will expand my explanation. Here is a pic of the object and the path I wanted it to follow.  I gave the path a yellow solid brush here so you could see it but when I lay this over another object, I will make the path transparent.   To animate this object down the path, the trick is to animate the Start number for the LayoutPath.  Not the StartItemIndex, the Start above Span. In order to enable animation when a user clicks and drags, I put in the following code snippets in the code behind. the DependencyProperties are not necessary for the Drag control.   namespace InetaPlayer { public partial class PositionControl : UserControl { private bool _mouseDown; private double _maxPlayTime; public PositionControl() { // Required to initialize variables InitializeComponent(); //mouse events for scrub control positionThumb.MouseLeftButtonDown += new MouseButtonEventHandler(ValueThumb_MouseLeftButtonDown); positionThumb.MouseLeftButtonUp += new MouseButtonEventHandler(ValueThumb_MouseLeftButtonUp); positionThumb.MouseMove += new MouseEventHandler(ValueThumb_MouseMove); positionThumb.LostMouseCapture += new MouseEventHandler(ValueThumb_LostMouseCapture); } // exposed for binding to real slider using a DependencyProperty enables animation, styling, binding, etc.... public double MaxPlayTime { get { return (double)GetValue(MaxPlayTimeProperty); } set { SetValue(MaxPlayTimeProperty, value); } } public static readonly DependencyProperty MaxPlayTimeProperty = DependencyProperty.Register("MaxPlayTime", typeof(double), typeof(PositionControl), null);   // exposed for binding to real slider using a DependencyProperty enables animation, styling, binding, etc....   public double CurrSliderValue { get { return (double)GetValue(CurrSliderValueProperty); } set { SetValue(CurrSliderValueProperty, value); } }   public static readonly DependencyProperty CurrSliderValueProperty = DependencyProperty.Register("CurrSliderValue", typeof(double), typeof(PositionControl), new PropertyMetadata(0.0, OnCurrSliderValuePropertyChanged));   private static void OnCurrSliderValuePropertyChanged(DependencyObject d, DependencyPropertyChangedEventArgs e) { PositionControl control = d as PositionControl; control.OnCurrSliderValueChanged((double)e.OldValue, (double)e.NewValue); }   private void OnCurrSliderValueChanged(double oldValue, double newValue) { _maxPlayTime = (double) GetValue(MaxPlayTimeProperty); if (!_mouseDown) if (_maxPlayTime!=0) sliderPathListBox.LayoutPaths[0].Start = newValue / _maxPlayTime; else sliderPathListBox.LayoutPaths[0].Start = 0; }   //mouse control   void ValueThumb_MouseMove(object sender, MouseEventArgs e) { if (!_mouseDown) return; //get the offset of how far the drag has been //direction is handled automatically (offset will be negative for left move and positive for right move) Point mouseOff = e.GetPosition(positionThumb); //Divide the offset by 1000 for a smooth transition sliderPathListBox.LayoutPaths[0].Start +=mouseOff.X/1000; _maxPlayTime = (double)GetValue(MaxPlayTimeProperty); SetValue(CurrSliderValueProperty ,sliderPathListBox.LayoutPaths[0].Start*_maxPlayTime); }   void ValueThumb_MouseLeftButtonUp(object sender, MouseButtonEventArgs e) { _mouseDown = false; } void ValueThumb_LostMouseCapture(object sender, MouseEventArgs e) { _mouseDown = false; } void ValueThumb_MouseLeftButtonDown(object sender, MouseButtonEventArgs e) { _mouseDown = true; ((UIElement)positionThumb).CaptureMouse(); }   } }   I made this into a user control and exposed a couple of DependencyProperties in order to bind it to a standard Slider in the overall project.  This control is embedded into the standard Expression media player template and is used to replace the standard scrub bar.  When the player goes live, I will put a link here.

  Read the article

• Wifi problems after upgrading to 13.10

  - by Simon

  I just upgraded to Ubuntu 13.10, but since the upgrade I don't have internet access via wifi anymore. I can: See networks Connect to a network Ping myself (localhost, 192.168.0.103) I can't: Ping others (including other devices on the same wireless network, including the gateway/router) Resolve hosts Access any other external resource, whether on my own network or on the internet Using Wireshark, I noticed my computer is continuously sending ARP-requests like "Who has 192.168.0.1 [which is the gateway]? Tell 192.168.0.103". It doesn't get any replies though. When I ping another IP-address for which it knows the mac-address (from cache), it turns out a packet loss of 90% occurs, and even if a packet manages to arrive it takes around 3000ms. The output of route -n is: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 eth1 192.168.0.0 0.0.0.0 255.255.255.0 U 9 0 0 eth1 192.168.122.0 0.0.0.0 255.255.255.0 U 0 0 0 virbr0 Before upgrading, wifi worked fine. Using other devices, wifi still works fine.Resetting the router didn't help. Ethernet still works after upgrading. Any suggestions? Update: I'm using the wl driver. Here's the relevant output of some commands: lspci | grep Wireless 03:00.0 Network controller: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter (rev 01) cat /etc/modprobe.d/blacklist.conf [...] blacklist mac80211 blacklist brcm80211 blacklist cfg80211 blacklist lib80211_crypt_tkip blacklist lib80211 blacklist b43 cat /etc/rc.local sudo modprobe -r lib80211 sudo insmod /lib/modules/3.2.0-30-generic-pae/kernel/net/wireless/lib80211.ko sudo insmod /lib/modules/3.2.0-30-generic-pae/kernel/net/wireless/lib80211_crypt_wep.ko sudo insmod /lib/modules/3.2.0-30-generic-pae/kernel/net/wireless/lib80211_crypt_tkip.ko sudo insmod /lib/modules/3.2.0-30-generic-pae/kernel/net/wireless/lib80211_crypt_ccmp.ko sudo modprobe wl exit 0 The last lines are probably how I got wireless working after the previous upgrade (wireless has been a problem after each upgrade). Update 2: added information about the exact hardware below. The hardware is an integrated device, so I ran lspci -nn | grep -i network. The output is: 03:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter [14e4:4727] (rev 01)

  Read the article

• Why are my scene's depth values not being written to my DepthStencilView?

  - by dotminic

  I'm rendering to a depth map in order to use it as a shader resource view, but when I sample the depth map in my shader, the red component has a value of 1 while all other channels have a value of 0. The Texture2D I use to create the DepthStencilView is bound with the D3D11_BIND_DEPTH_STENCIL | D3D11_BIND_SHADER_RESOURCE flags, the DepthStencilView has the DXGI_FORMAT_D32_FLOAT format, and the ShaderResourceView's format is D3D11_SRV_DIMENSION_TEXTURE2D. I'm setting the depth map render target, then i'm drawing my scene, and once that is done, I'm the back buffer render target and depth stencil are set on the output merger, and I'm using the depth map shader resource view as a texture in my shader, but the depth value in the red channel is constantly 1. I'm not getting any runtime errors from D3D, and no compile time warning or anything. I'm not sure what I'm missing here at all. I have the impression the depth value is always being set to 1. I have not set any depth/stencil states, and AFAICT depth writing is enabled by default. The geometry is being rendered correctly so I'm pretty sure depth writing is enabled. The device is created with the appropriate debug flags; #if defined(DEBUG) || defined(_DEBUG) deviceFlags |= D3D11_CREATE_DEVICE_DEBUG | D3D11_RLDO_DETAIL; #endif This is how I create my depth map. I've omitted error checking for the sake of brevity D3D11_TEXTURE2D_DESC td; td.Width = width; td.Height = height; td.MipLevels = 1; td.ArraySize = 1; td.Format = DXGI_FORMAT_R32_TYPELESS; td.SampleDesc.Count = 1; td.SampleDesc.Quality = 0; td.Usage = D3D11_USAGE_DEFAULT; td.BindFlags = D3D11_BIND_DEPTH_STENCIL | D3D11_BIND_SHADER_RESOURCE; td.CPUAccessFlags = 0; td.MiscFlags = 0; _device->CreateTexture2D(&texDesc, 0, &this->_depthMap); D3D11_DEPTH_STENCIL_VIEW_DESC dsvd; ZeroMemory(&dsvd, sizeof(dsvd)); dsvd.Format = DXGI_FORMAT_D32_FLOAT; dsvd.ViewDimension = D3D11_DSV_DIMENSION_TEXTURE2D; dsvd.Texture2D.MipSlice = 0; _device->CreateDepthStencilView(this->_depthMap, &dsvd, &this->_dmapDSV); D3D11_SHADER_RESOURCE_VIEW_DESC srvd; srvd.Format = DXGI_FORMAT_R32_FLOAT; srvd.ViewDimension = D3D11_SRV_DIMENSION_TEXTURE2D; srvd.Texture2D.MipLevels = texDesc.MipLevels; srvd.Texture2D.MostDetailedMip = 0; _device->CreateShaderResourceView(this->_depthMap, &srvd, &this->_dmapSRV);

  Read the article

• What are the industry metrics for average spend on dev hardware and software? [on hold]

  - by RationalGeek

  I'm trying to budget for my dev shop and compare our budget items to industry expectations. I'm hoping to find some information on what percentage of a dev's salary is generally spent on tooling, both hardware and software. Where can I find such information? If instead there is a source that looks at raw dollars that is useful, too. I can extrapolate what I need from that. NOTE: Your anecdotal evidence from your own job will not be very helpful. I'm looking for industry average statistics from a credible source. EDIT: I'm reluctant to even keep this question going based on the passionate negative responses of commenters, but I do think this is valuable information (assuming anyone will care to answer) so let me make one attempt to clarify why I'm looking for this information, and then leave it at that. I'm not sure why understanding and validating my motives is a necessary step to providing the information, but apparently that is the case, so I will do my best. Firstly, let me respond to the idea that us "management types" shouldn't use these types of metrics to evaluate budgets. I agree in part. Ideally, you should spend whatever is necessary on developers in order to keep them fully happy and productive. And this is true of all employees. However, companies operate in a world of limited resources, and every dollar spent in one area means a dollar not spent in another. So it is not enough to simply say "I need to spend $10,000 per developer next year" without having some way to justify that position. One way to help justify it is to compare yourself against the industry. If it is the case that on average a software shops spends 5% (making up that number) of their total development budget (salaries being the large portion of the other 95%, for arguments sake), and I'm only spending 3%, it helps in the justification process. So, it is not my intent to use this information to limit what I spend on developers, but rather to arm myself with the necessary justification to spend what I need to spend on developers to give them the best tools I can. I have been a developer for many years and I understand the need for proper tooling. Next, let's examine the idea that even considering the relationship between a spend on developer salaries and developer tooling is ludicrous and should be banned from budgetary thinking. As Jimmy Hoffa put it in their comment, it's like saying "I'm going to spend no more than 10% of median employee salary on light bulbs and coffee from now on.". Well, yes, it is like saying that, and from a budgeting perspective, this is a useful way to look at things. If you know that, on average, an employee consumes X dollars of coffee a year, then you can project a coffee budget based on that. And you can compare it to an industry metric to understand where you fall: do you spend more on coffee than other companies or less? Why might this be? If you are a coffee supply manager, that seems like a useful thought process. The same seems to hold true for developers. Now, on to the idea that I need to compare "apples to apples" and only look at other shops that are in the same place geographically, the same business, the same application architecture, and the same development frameworks. I guess if I could find such a statistic that said "a shop that is exactly identical to yours spends X on developer tooling" it would be wonderful. But there is plenty of value in an average statistic. Here's an analogy: let's say you are working on a household budget and need to decide how much to spend on groceries. Is it enough to know that the average consumer spends 15% on groceries and therefore decide that you will budget exactly 15%? No. You have to tweak your budget based on your individual needs and situation. But the generalized statistic does help in this evaluation. You can know if your budget is grossly off from what others are doing, and this can help you figure out why this is. So, I will concede the point that it would be better to find statistics that align to my shop, though I think any statistics I could find would be useful for what I'm doing. In that light, let's say that my shop is mostly focused on ASP.NET web applications. That doesn't map perfectly to reality because large enterprises have very heterogenous IT environments. But if I was going to pick one technology that is our focus that would be it. But, if you were to point me at some statistics that are related to a Linux shop doing embedded Java applications, I would still find it useful as a point of comparison. SUMMARY: Let me try to rephrase my question. I'm trying to find industry metrics on how much dev shops spend on developer tooling, both hardware and software. I don't so much care whether it is expressed as a percentage of total budget or as X dollars per dev or as Y percentage of salary. Any metric would be useful. If there are metrics that are specific to ASP.NET dev shops in the Northeast US, all the better, but I would be happy to find anything.

  Read the article

• Ubuntu 12.4.1 failing in vm both Vbox and Vmware on new HP Envy 4t-1000

  - by Chas

  Brand new to Linux, getting frustrated trying to get an environment up with Ubuntu. My primary goal is to learn Linux and Apache/PHP development. I need to keep my Windows OS as main on my machine for work, so i'm trying to virtualize Ubuntu 12.4.1 without luck (many attempts). I have a new HP Envy 4t-1000 with 16gb ram, and 32 gb ssd caching with 500gb spindle hard drive. Graphics card is an Intel HD 3000 with AMD Radeon 7670M. With installing Ubuntu desktop in VBox, I'm getting this result: https://forums.virtualbox.org/viewtopic.php?f=6&t=51939 With VMware workstation 7 (patched), I complete the install of Ubuntu, it reboots, purple desktop briefly flashes then it drops to command line. I bought a beginning Ubuntu book, and it recommends trying to manually configure graphics if this happens. So I tried doing a safe boot holding shift - I get to the first screen (GRUB) loads fine, and I choose recovery mode. After choosing the recovery mode, I get the recovery mode options, and can arrow down to what the book suggests 'Run in fail safe graphic mode.' Once I select this option, I get a black screen with a large white dialogue box, at the top it says "The system is running in low-graphics mode. Your screen, graphics card, and input device settings could not be detected correctly. You will need to configure these yourself." Then there is an ok button way down at the bottom. When I select 'ok' I get a menu for a few options, book recommended 'reconfigure graphics.' When I try this, I get a menu of two options: 1) "Use generic (default) configuration or 2) use backup. I've tried both options several times, hitting ok just refreshes screen and nothing more. Rebooting at this point just goes back to command line as before. I don't know what to do at this point, I've spent too many hours this weekend trying in both VBox and VMware to get Ubuntu going. Isn't there like a very basic graphic display or something I can use to at least get into the desktop? I explored the GRUB some more, and tried to look at the startup and xserver logs - both are blank. No help there I guess? When I try to choose 'Edit the configuration file, then 'ok' screen just refreshes on same menu options, nothing happens. thx for any advice. I really need to focus on learning Linux, Apache and PHP, so perhaps Ubuntu just won't work on my hardware? Any other suggestions? I will need to virtualize - THANKS for any help/advice.

  Read the article

• 13.10 upgrade dropping wifi [on hold]

  - by Daryl

  Almost a complete newb here. After my last upgrade from 12.04 to 13.10 my wifi now randomly drops. The only way I can get a signal back is a shutdown and restart otherwise it shows no network is even available to connect to. Had no problems until the upgrade. Any help would be appreciated. H/W path Device Class Description ==================================================== system h8-1534 (H2N64AA#ABA) /0 bus 2AC8 /0/0 memory 64KiB BIOS /0/4 processor AMD FX(tm)-6200 Six-Core Processor /0/4/5 memory 288KiB L1 cache /0/4/6 memory 6MiB L2 cache /0/4/7 memory 8MiB L3 cache /0/d memory 10GiB System Memory /0/d/0 memory DIMM Synchronous [empty] /0/d/1 memory 4GiB DIMM DDR3 Synchronous 1600 MHz (0.6 ns) /0/d/2 memory 2GiB DIMM DDR3 Synchronous 1600 MHz (0.6 ns) /0/d/3 memory 4GiB DIMM DDR3 Synchronous 1600 MHz (0.6 ns) /0/100 bridge RD890 PCI to PCI bridge (external gfx0 port B) /0/100/0.2 generic RD990 I/O Memory Management Unit (IOMMU) /0/100/2 bridge RD890 PCI to PCI bridge (PCI express gpp port B) /0/100/2/0 display Turks PRO [Radeon HD 7570] /0/100/2/0.1 multimedia Turks/Whistler HDMI Audio [Radeon HD 6000 Series] /0/100/5 bridge RD890 PCI to PCI bridge (PCI express gpp port E) /0/100/5/0 bus TUSB73x0 SuperSpeed USB 3.0 xHCI Host Controller /0/100/11 storage SB7x0/SB8x0/SB9x0 SATA Controller [RAID5 mode] /0/100/12 bus SB7x0/SB8x0/SB9x0 USB OHCI0 Controller /0/100/12.2 bus SB7x0/SB8x0/SB9x0 USB EHCI Controller /0/100/13 bus SB7x0/SB8x0/SB9x0 USB OHCI0 Controller /0/100/13.2 bus SB7x0/SB8x0/SB9x0 USB EHCI Controller /0/100/14 bus SBx00 SMBus Controller /0/100/14.2 multimedia SBx00 Azalia (Intel HDA) /0/100/14.3 bridge SB7x0/SB8x0/SB9x0 LPC host controller /0/100/14.4 bridge SBx00 PCI to PCI Bridge /0/100/14.5 bus SB7x0/SB8x0/SB9x0 USB OHCI2 Controller /0/100/15 bridge SB700/SB800/SB900 PCI to PCI bridge (PCIE port 0) /0/100/15.1 bridge SB700/SB800/SB900 PCI to PCI bridge (PCIE port 1) /0/100/15.2 bridge SB900 PCI to PCI bridge (PCIE port 2) /0/100/15.2/0 wlan0 network RT3290 Wireless 802.11n 1T/1R PCIe /0/100/15.2/0.1 generic RT3290 Bluetooth /0/100/15.3 bridge SB900 PCI to PCI bridge (PCIE port 3) /0/100/15.3/0 eth0 network RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller /0/100/16 bus SB7x0/SB8x0/SB9x0 USB OHCI0 Controller /0/100/16.2 bus SB7x0/SB8x0/SB9x0 USB EHCI Controller /0/101 bridge Family 15h Processor Function 0 /0/102 bridge Family 15h Processor Function 1 /0/103 bridge Family 15h Processor Function 2 /0/104 bridge Family 15h Processor Function 3 /0/105 bridge Family 15h Processor Function 4 /0/106 bridge Family 15h Processor Function 5 /0/1 scsi0 storage /0/1/0.0.0 /dev/sda disk 1TB WDC WD1002FAEX-0 /0/1/0.0.0/1 volume 189MiB Windows FAT volume /0/1/0.0.0/2 /dev/sda2 volume 244MiB data partition /0/1/0.0.0/3 /dev/sda3 volume 931GiB LVM Physical Volume /0/2 scsi2 storage /0/2/0.0.0 /dev/cdrom disk DVD A DH16ACSHR /0/3 scsi6 storage /0/3/0.0.0 /dev/sdb disk SCSI Disk /0/3/0.0.1 /dev/sdc disk SCSI Disk /0/3/0.0.2 /dev/sdd disk SCSI Disk /0/3/0.0.3 /dev/sde disk MS/MS-Pro /0/3/0.0.3/0 /dev/sde disk /1 power Standard Efficiency I apologize for my newbness. I hope this is enough info for the hardware. Thanks Bruno for pointing out I needed to add more info. If I am lacking anything else please let me know and I'll post it.

  Read the article

• After startup, display reverts to one desktop duplicated on both screens

  - by Skilldrick

  I have a Samsung R530 laptop. I'm actually running Linux Mint, which is based on Ubuntu (which is why I thought it would be OK to post this here). I'm now getting exactly the same problem on Ubuntu 10.10. I've got it setup with a secondary LCD monitor, and I've changed the display settings so the laptop screen and monitor are at optimal resolution, with the desktop shared between them. After startup though (typically around 10-30 seconds) the display reverts to 1024 x 768 on both screens, and the display is duplicated (i.e. both screens show the same thing). I think this is something to do with my video card, as I had the same problem when I was running Arch Linux. Any ideas? Edit: 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 09) 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 09) 00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 09) 00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) 00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) 00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03) 00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03) 00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03) 00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) 00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) 00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) 00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI Controller (rev 03) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03) 02:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) 04:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8040 PCI-E Fast Ethernet Controller It seems it's Intel, not Nvidia. I have a current work around, which is to have a launcher to a script containing xrandr --output LVDS1 --mode 1366x768 --output HDMI1 --mode 1280x1024 --left-of LVDS1 on my desktop, and to run it after the displays revert, but it's not ideal.

  Read the article

• Mousin' down the PathListBox

  - by T

  While modifying the standard media player with a new look and feel for Ineta Live I saw a unique opportunity to use their logo with a dotted I with and attached arc as the scrub control. So I created a PathListBox that I wanted an object to follow when a user did a click and drag action.  Below is how I solved the problem.  Please let me know if you have improvements or know of a completely different way.  I am always eager to learn. First, I created a path using the pen tool in Expression Blend (see the yellow line in image below).  Then I right clicked that path and chose [Path] --> [Make Layout Path].   That created a new PathListBox.  Then I chose the object I want to move down the new PathListBox and Placed it as a child in the Objects and Timeline window (see image below).  If the child object (the thing the user will click and drag) is XAML, it will move much smoother than images. Just as another side note, I wanted there to be no highlight when the user selects the “ball” to drag and drop.  This is done by editing the ItemContainerStyle under Additional Templates on the PathListBox.  Post a question if you need help on this and I will expand my explanation. Here is a pic of the object and the path I wanted it to follow.  I gave the path a yellow solid brush here so you could see it but when I lay this over another object, I will make the path transparent.   To animate this object down the path, the trick is to animate the Start number for the LayoutPath.  Not the StartItemIndex, the Start above Span. In order to enable animation when a user clicks and drags, I put in the following code snippets in the code behind. the DependencyProperties are not necessary for the Drag control. namespace InetaPlayer{ public partial class PositionControl : UserControl { private bool _mouseDown; private double _maxPlayTime; public PositionControl() { // Required to initialize variables InitializeComponent(); //mouse events for scrub control positionThumb.MouseLeftButtonDown += new MouseButtonEventHandler(ValueThumb_MouseLeftButtonDown); positionThumb.MouseLeftButtonUp += new MouseButtonEventHandler(ValueThumb_MouseLeftButtonUp); positionThumb.MouseMove += new MouseEventHandler(ValueThumb_MouseMove); positionThumb.LostMouseCapture += new MouseEventHandler(ValueThumb_LostMouseCapture); } // exposed for binding to real slider using a DependencyProperty enables animation, styling, binding, etc.... public double MaxPlayTime { get { return (double)GetValue(MaxPlayTimeProperty); } set { SetValue(MaxPlayTimeProperty, value); } } public static readonly DependencyProperty MaxPlayTimeProperty = DependencyProperty.Register("MaxPlayTime", typeof(double), typeof(PositionControl), null);   // exposed for binding to real slider using a DependencyProperty enables animation, styling, binding, etc....   public double CurrSliderValue { get { return (double)GetValue(CurrSliderValueProperty); } set { SetValue(CurrSliderValueProperty, value); } }   public static readonly DependencyProperty CurrSliderValueProperty = DependencyProperty.Register("CurrSliderValue", typeof(double), typeof(PositionControl), new PropertyMetadata(0.0, OnCurrSliderValuePropertyChanged));   private static void OnCurrSliderValuePropertyChanged(DependencyObject d, DependencyPropertyChangedEventArgs e) { PositionControl control = d as PositionControl; control.OnCurrSliderValueChanged((double)e.OldValue, (double)e.NewValue); }   private void OnCurrSliderValueChanged(double oldValue, double newValue) { _maxPlayTime = (double) GetValue(MaxPlayTimeProperty); if (!_mouseDown) if (_maxPlayTime!=0) sliderPathListBox.LayoutPaths[0].Start = newValue / _maxPlayTime; else sliderPathListBox.LayoutPaths[0].Start = 0; }  //mouse control   void ValueThumb_MouseMove(object sender, MouseEventArgs e) { if (!_mouseDown) return; //get the offset of how far the drag has been //direction is handled automatically (offset will be negative for left move and positive for right move) Point mouseOff = e.GetPosition(positionThumb); //Divide the offset by 1000 for a smooth transition sliderPathListBox.LayoutPaths[0].Start +=mouseOff.X/1000; _maxPlayTime = (double)GetValue(MaxPlayTimeProperty); SetValue(CurrSliderValueProperty ,sliderPathListBox.LayoutPaths[0].Start*_maxPlayTime); }   void ValueThumb_MouseLeftButtonUp(object sender, MouseButtonEventArgs e) { _mouseDown = false; } void ValueThumb_LostMouseCapture(object sender, MouseEventArgs e) { _mouseDown = false; } void ValueThumb_MouseLeftButtonDown(object sender, MouseButtonEventArgs e) { _mouseDown = true; ((UIElement)positionThumb).CaptureMouse(); }   }}  I made this into a user control and exposed a couple of DependencyProperties in order to bind it to a standard Slider in the overall project.  This control is embedded into the standard Expression media player template and is used to replace the standard scrub bar.  When the player goes live, I will put a link here.

  Read the article

• Help recovering broken OS (permissions issue)

  - by Guandalino

  (At the bottom there is an important update.) I was doing experiments in order to backup a remote account to my local system, Ubuntu 12.04 LTS. I'm not confident with duplicity and probably, due to wrong syntax, some local files have been replaced with remote files. This is just a supposition, I'm not sure this is the real cause of OS corruption. The corruption happened after experimenting with backups, so I think I did something wrong at this regard. I was aware there was a problem when I tried to access a command using sudo: $ sudo ls sudo: unable to open /etc/sudoers: Permission denied sudo: no valid sudoers sources found, quitting sudo: unable to initialize policy plugin This is how /etc/sudoers looks like: $ ls -ald /etc/sudoers -r--r----- 1 root root 788 Oct 2 18:30 /etc/sudoers At this point I tried to reboot and now this is the message I get: The system is running in low graphics mode. Your screen, graphics card and input device settings could not be detected correctly. You will need to configure these yourself. I tried to follow the wizard to configure these settings, but without luck (the system prevents me going on when I press "Next"). The thing that makes me a bit less worried is that all the data on the disk seems readable and I'm able to access them using a live cd. I run memtest and RAM seems to be OK. Do you have any idea about how to recover my system? I'm very glad to provide further information, just let me know what info could be helpful. UPDATE. The issue is about wrong permissions and this is how I discovered: I mounted the root partition of the broken OS on /mnt/broken/ (live CD) and did ls /mnt/broken/. I got a permission denied error, while I expected to have the directory listing. I had to do sudo ls /mnt/broken/ and this worked. Thus without having root permission via sudo it's impossible to access the root of broken os. The current output of ls -ld /mnt/broken/ is: drwxr-x--- 29 1000 812 4096 2012-12-08 21:58 /mnt/broken Any thoughts on how to restore the old (working) set of permissions?

  Read the article

• No Sound in 12.04 on Acer TimelineX 3830TG

  - by Fawkes5

  When i first installed ubuntu 12.04 everything worked fine. All of a sudden my sound has stopped working!! This has happened before [like 2 days ago], however the next day it started working again. That may happen again...[I've already rebooted 5 times] My Sound Card is a HDA intel PCH My Sound Chip is Intel CougarPoint HDMI My machine is an Acer TimelineX 3830TG, heres my lcpci output 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b4) 00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b4) 00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b4) 00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b4) 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 04) 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 04) 01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 540M] (rev ff) 02:00.0 Ethernet controller: Atheros Communications Inc. AR8151 v2.0 Gigabit Ethernet (rev c0) 03:00.0 Network controller: Atheros Communications Inc. AR9287 Wireless Network Adapter (PCI-Express) (rev 01) 04:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5116 PCI Express Card Reader (rev 01) 05:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04) I'm running a dual boot with Windows 7, sound always works there. I've tried loading earlier kernels [3.2.0 ] but that hasn't helped. I've tried playing with alsamixer, unmuting and raising volume, doesn't work I've tried playing with pauvcontrol, doesnt work. Althought, strangely, when i play a song, under output i can see a bar moving implying that something is working, just the sound isn't getting through my speakers. Thus it might be a hardware problem. I've tried unistalling and reinstalling pulsaudio annd alsamixer, doesn't work [maybe made it worse...]. I've heard reverting back to kernel 3.0... works, but i'm reluctant to try that[i dont know much about kernels]. Thank you. Please tell me what other information you need. EDIT: My audio has started working again after another reboot. However this time im not connected to my external audio on startup. I will see if this is the issue next time i'm at home Edit: Connecting to external audio is not the problem.

  Read the article

• Misused mke2fs and cannot boot into system

  - by surlogics

  I installed Ubuntu with WUBI in Windows 7 64bit, and I had installed Mandriva 2011 with a disk. I tried to learn Linux with Ubuntu and misused mke2fs; after I reboot my computer, Windows 7 and Ubuntu has crashed. As I have Mandriva, I boot into Mandriva and found # df -h /dev/sda7 12G 9.8G 1.5G 88% / /dev/sda2 15G 165M 14G 2% /media/logical /dev/sda6 119G 88G 32G 74% /media/2C9E85319E84F51C /dev/sda5 118G 59G 60G 50% /media/D25A6DDE5A6DBFB9 /dev/sda9 100G 188M 100G 1% /media/ae69134a-a65e-488f-ae7f-150d1b5e36a6 /dev/sda1 100M 122K 100M 1% /media/DELLUTILITY /dev/sda3 98G 81G 17G 83% /media/OS # fdisk /dev/sda Command (m for help): p Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xd24f801e Device Boot Start End Blocks Id System /dev/sda1 2048 206847 102400 6 FAT16 /dev/sda2 * 206848 30926847 15360000 7 HPFS/NTFS/exFAT /dev/sda3 30926848 235726847 102400000 7 HPFS/NTFS/exFAT /dev/sda4 235728864 976771071 370521104 f W95 Ext'd (LBA) /dev/sda5 235728896 481488895 122880000 7 HPFS/NTFS/exFAT /dev/sda6 727252992 976771071 124759040 7 HPFS/NTFS/exFAT /dev/sda7 481500243 506674034 12586896 83 Linux /dev/sda8 506674098 514851119 4088511 82 Linux swap / Solaris /dev/sda9 514851183 727246484 106197651 83 Linux Partition table entries are not in disk order I think I may used the following command mke2fs -j -L "logical"/dev/sda2 but I had forgotten what kind of partition it was before I transfered it into ext3. perhaps ntfs Data was not lost, and I can view my files as I could in Windows. In Mandriva, there are following disks: 117.2 GB hard disk, files in it is the same as my Windows D:, and Ubuntu was installed in it; 119.0 GB hard disk is my G:, with my personal files in it; 12.0 GB is the same with Mandriva / (with means root), 101.3 GB hard disk with nothing but lost+found; DELLUTILITY should be Dell computer utilities pre-installed in my computer; logical is the disk which I had spoiled, I can view nothing but lost+found; and OS is the C: in my Windows. After I boot, grub lets me choose Mandriva or Windows. I chose Windows and it tells me: FILE system type unknown, partition type 0x7 Error 13: Invalid or unsupported executable format I doubt something wrong with windows MBR or something # cat /boot/grub/menu.lst timeout 5 color black/cyan yellow/cyan gfxmenu (hd0,6)/boot/gfxmenu default 0 title linux kernel (hd0,6)/boot/vmlinuz BOOT_IMAGE=linux root=UUID=199581b7-ac7e-4c5f-9888-24c4f213cad8 nokmsboot logo.nologo quiet resume=UUID=34c546e4-9c42-4526-aa64-bbdc0e9d64fd splash=silent vga=788 initrd (hd0,6)/boot/initrd.img title linux-nonfb kernel (hd0,6)/boot/vmlinuz BOOT_IMAGE=linux-nonfb root=UUID=199581b7-ac7e-4c5f-9888-24c4f213cad8 nokmsboot resume=UUID=34c546e4-9c42-4526-aa64-bbdc0e9d64fd initrd (hd0,6)/boot/initrd.img title failsafe kernel (hd0,6)/boot/vmlinuz BOOT_IMAGE=failsafe root=UUID=199581b7-ac7e-4c5f-9888-24c4f213cad8 nokmsboot failsafe initrd (hd0,6)/boot/initrd.img title windows root (hd0,1) makeactive chainloader +1 I can boot into Linux, but not Ubuntu, it boot into Mandriva. I don't have a boot disk. Help me find a way to make it work again.

  Read the article

• openGL textures in bitmap mode

  - by evenex_code

  For reasons detailed here I need to texture a quad using a bitmap (as in, 1 bit per pixel, not an 8-bit pixmap). Right now I have a bitmap stored in an on-device buffer, and am mounting it like so: glBindBuffer(GL_PIXEL_UNPACK_BUFFER, BFR.G[(T+1)%2]); glTexImage2D(GL_TEXTURE_2D, 0, GL_RGB, W, H, 0, GL_COLOR_INDEX, GL_BITMAP, 0); The OpenGL spec has this to say about glTexImage2D: "If type is GL_BITMAP, the data is considered as a string of unsigned bytes (and format must be GL_COLOR_INDEX). Each data byte is treated as eight 1-bit elements..." Judging by the spec, each bit in my buffer should correspond to a single pixel. However, the following experiments show that, for whatever reason, it doesn't work as advertised: 1) When I build my texture, I write to the buffer in 32-bit chunks. From the wording of the spec, it is reasonable to assume that writing 0x00000001 for each value would result in a texture with 1-px-wide vertical bars with 31-wide spaces between them. However, it appears blank. 2) Next, I write with 0x000000FF. By my apparently flawed understanding of the bitmap mode, I would expect that this should produce 8-wide bars with 24-wide spaces between them. Instead, it produces a white 1-px-wide bar. 3) 0x55555555 = 1010101010101010101010101010101, therefore writing this value ought to create 1-wide vertical stripes with 1 pixel spacing. However, it creates a solid gray color. 4) Using my original 8-bit pixmap in GL_BITMAP mode produces the correct animation. I have reached the conclusion that, even in GL_BITMAP mode, the texturer is still interpreting 8-bits as 1 element, despite what the spec seems to suggest. The fact that I can generate a gray color (while I was expecting that I was working in two-tone), as well as the fact that my original 8-bit pixmap generates the correct picture, support this conclusion. Questions: 1) Am I missing some kind of prerequisite call (perhaps for setting a stride length or pack alignment or something) that will signal to the texturer to treat each byte as 8-elements, as it suggests in the spec? 2) Or does it simply not work because modern hardware does not support it? (I have read that GL_BITMAP mode was deprecated in 3.3, I am however forcing a 3.0 context.) 3) Am I better off unpacking the bitmap into a pixmap using a shader? This is a far more roundabout solution than I was hoping for but I suppose there is no such thing as a free lunch.

  Read the article

• Is Ubuntu recognizing and/or using my NVIDIA graphics card?

  - by user212860

  This is my first post here, and I'm pretty new to Ubuntu/Linux. I currently have no other OS except for Ubuntu 13.10. (I used to have Win7 until i got a new terabyte hard drive). My current PC build, if any of this helps: CPU: Intel i5 quad-core Graphics: NVIDIA GeForce GTX 650 RAM: 8 GB HDD: 1 TB SATA 3 Motherboard: MSi Z77 A-G41 OS Ubuntu 13.10 So I recently installed Ubuntu 13.10 and put Steam on it, and I'm seeing that my games run a lot slower than they did when I had Win7. I figured it was a graphics problem, so I checked System Settings Details Overview. It says in "Graphics" that I have "Gallium 0.4 on NVE7" (don't really know what that is). Does this mean that Ubuntu is not using my graphics card? In System Settings Software & Updates Additional Drivers, it clearly shows like this: NVIDIA Corporation: GK107 [GeForce GTX 650] -This device is using an alternative driver (And then it shows a list of drivers that I can switch back and forth to) So this is a bit confusing. In Software and Updates, it clearly shows that I have my NVIDIA card installed, and that I have a driver selected for it. But in System Settings, it shows I have some Gallium 0.4 thing. I had done a bit of research, and ended up typing command: "lspci|grep VGA" in the Terminal. It showed this in response: VGA compatible controller: NVIDIA Corporation GK107 [GeForce GTX 650] (rev a1) The Terminal seems to recognize my graphics card. What it looks like to me, is that I don't have the proper driver, and I might be using my CPU's integrated graphics. When I switch around which driver I am using in that list, it still does not see my card in System Settings. Some of the drivers in the list give me some sort of OpenGL error when I try to run a game. It might just be that my games are running slow because the game developers have not optimized it for Ubuntu that well. However, that still doesn't take away from the fact that System Settings is not showing my NVIDIA card. TL;DR Version: How do I know if my video card is being recognized/used? If my video card is not being used, what is the best way fix that? Please make your answers easy to understand. I do not mind wordy responses, as long as I can follow what you're saying. Any help would be greatly appreciated! Thanks, Jabber5

  Read the article

• Wifi problems with Ubuntu 13.10

  - by Sparrowhawk4

  I should probably say straight off that I am brand new to Ubuntu. I installed 13.10 alongside Windows 7 a couple of days ago and I've managed to clear up all the little problems, apart from with the wifi. My internet is fine using an ethernet cable. I can connect to the wifi, and it tells me that the signal is good, but for the vast majority of the time I can't load anything, and system monitor tells me that I am sending and receiving nothing. The problem is somewhere in Ubuntu. It works fine on Windows 7, my Android phone and all of my flatmates laptops. I know I'm not the only one with this problem, but the fixes I've seen either don't work or I don't understand them enough to carry them out. Help? EDIT: from lspci command as requested 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07) 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) 00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) 00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03) 00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03) 00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) 00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) 00:1d.3 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03) 00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) 00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] (rev 03) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03) 00:1f.6 Signal processing controller: Intel Corporation 82801I (ICH9 Family) Thermal Subsystem (rev 03) 02:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8191SEvA Wireless LAN Controller (rev 10) 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)

  Read the article

• Linux?????Oracle ASMLib??????

  - by ??-Oracle

  ??Oracle ASMLIB?????? ?????????linux??????oracle?asmlib?????????,?????????????,????????????????????????????????????????" multipatha",???????? ??????????: ???????????,???????????:ASM??????2??????,????????????????????????3?,?: ???????? ???????? ????????????? ???????:?????????????,?/ dev/ sda?,?????????????.?????2?????????????????? Linux?SCSI????????????????????/dev/sdb?/dev/sdc.??????sdb??sdc?????????? ??,???????????????,???????????????? ,?/dev/multipatha,?????????????,????,??I/ O??multipatha????????????????????????sdb??,?????????????,????????????multipath?????????sdc?????????? ????????????????????,???????????:sdb??sdc???multpatha,??????????????ASMLIB???,??????,ASMLIB?????????????? ASMLIB???,??????????,??ASM????????????????????????????ASM????????,?????????? ??????????:ASM??????????? ??????,ASMLIB????????????.Linux???????????,?????????????,????multipath ?????????? ???????ASMLIB??????????!??Oracle?????,?????????? ?????,????,??????ASMLIB??????????????????,??????????????: ??????:     ASMLIB???ASMLIB???????????????ASMLIB??????ASMLIB?????????????????????????ASMLIB??????????????????,???????????/etc/init.d/oracleasm scandisks????????????ASMLIB????????????????????????????asmlib???,???????????ASMLIB????,?????,ASMLIB??OS????????????,????OS?????????? ????????,???????OS?????????????????ASMLIB?????????????????????????ASMLIB?????????????,?????Oracle??? ASMLib??????????????????????,???????????????????????,ASMLib?????????????,?????????????????.?????????????????????????     ??????????????????,??????????????????????,??ASMLib?????,?????????????????????????????????ASMLib???????????,??????????? ???????: ASMLib?????????/etc/sysconfig/oracleasm.???????/etc/sysconfig/oracleasm-_dev_oracleasm ???????????????????????????/etc/init.d/oracleasm configure ???????????,?????????????? ???????????????? ORACLEASM_SCANORDER ??????????????; ORACLEASM_SCANEXCLUDE????????????????????; ???????????????????.???,????????????????,?????????,?????sd???????SCSI??????????????.??????????,??????????????? /dev/ ?????????????? ??:???????,?????????????????????device-mapper???,????????/dev/dm-XX??/dev/mapper/XXX???????udev???????????????ORACLEASM_SCANORDER ?? ORACLEASM_SCANEXCLUDE???? dm ????? ???????: ??:?????????/etc/sysconfig/oracleasm,????????????/etc/sysconfig/oracleasm-_dev_oracleasm???? ?????????: ???????ASMLib??????????????,?ASMLib??????,??ORACLEASM_SCANORDER??,????: ORACLEASM_SCANORDER="multipath sd" ??,???????,ASMLib??????"multipath"????????????/dev/multipatha ?????????????????????ASMLib?????"sd"?????????SCSI????????/dev/sda?????,???????ASM???? ??????/dev/sdb?/dev/sdc??????,???ASM???,??ASMLib ????????????????ASMLib?????????ASMLib??????????????????? ????????: ?????????ASMLib???????????ASMLib??????,??ORACLEASM_SCANEXCLUDE??,????: ORACLEASM_SCANEXCLUDE="sdb sdc" ??,????????????ASMLib???????????/dev/sdb?/dev/sdc.????????SCSI?????,ASMLib????????????2???,?????/dev/multipath???,??,Oracle?????????? EMC PowerPath ?ASMLib ??????????EMC PowerPatch??????ASMLib?????? ????,PowerPath?2.4 kernels EMC??????Linux??2.6??,?RHEL 4??SLES 9??2.0ASMLib kernel ??????? ??EMC Power Patch???,???EMC Support Matrix????????/?? ??????????? ???????? ASMLib ? PowerPath ?Linux 2.4 Kernel????,?RHEL3 SLES8 ???????,???EMC ?: ??????OTN?????: Configuring Oracle ASMLib on Multipath Disks

  Read the article

• Fortigate Remote VPN : no matching gateway for new request

  - by Kedare

  I am trying to configure a Fortigate 60C to act as an IPSec endpoint for remote VPN. I configured it like this : SCR-F0-FGT100C-1 # diagnose vpn ike config vd: root/0 name: SCR-REMOTEVPN serial: 7 version: 1 type: dynamic mode: aggressive dpd: enable retry-count 3 interval 5000ms auth: psk dhgrp: 2 xauth: server-auto xauth-group: VPN-group interface: wan1 distance: 1 priority: 0 phase2s: SCR-REMOTEVPN-PH2 proto 0 src 0.0.0.0/0.0.0.0:0 dst 0.0.0.0/0.0.0.0:0 dhgrp 5 replay keep-alive dhcp policies: none Here is the configuration: config vpn ipsec phase1-interface edit "SCR-REMOTEVPN" set type dynamic set interface "wan1" set dhgrp 2 set xauthtype auto set mode aggressive set proposal aes256-sha1 aes256-md5 set authusrgrp "VPN-group" set psksecret ENC xxx next config vpn ipsec phase2-interface edit "SCR-REMOTEVPN-PH2" set keepalive enable set phase1name "SCR-REMOTEVPN" set proposal aes256-sha1 aes256-md5 set dhcp-ipsec enable next end But when I try to connect from a remote device (I tested with an Android Phone), the phone fail to connect and the fortinet return this error : 2012-07-20 13:08:51 log_id=0101037124 type=event subtype=ipsec pri=error vd="root" msg="IPsec phase 1 error" action="negotiate" rem_ip=xxx loc_ip=xxx rem_port=1049 loc_port=500 out_intf="wan1" cookies="xxx" user="N/A" group="N/A" xauth_user="N/A" xauth_group="N/A" vpn_tunnel="N/A" status=negotiate_error error_reason=no matching gateway for new request peer_notif=INITIAL-CONTACT I tried searching on the web, but i did not find anything revelant to this. Do you have any idea of what can be the problem ? I tried many combinaisons of settings on the fortigate without success..

  Read the article

• What does "single-bit ECC errors were detected on the RAID controller" mean?

  - by jsp

  I have a Dell T7600 with a Perc H710P RAID controller and 4 attached 3TB drives. Over the past few months the RAID controller has been intermittently reporting errors on boot: "no boot device found", "adapter at baseport is not responding", disks frequently reported as missing or failed. I have since replaced the RAID controller, the 4 hard drives, and finally the system's motherboard. After replacing the motherboard and rebooting a few times, I got the error Single bit ECC errors were detected on the RAID controller. Please contact technical support to resolve this issue. After rebooting about 20 more times, I haven't seen the ECC error. The system seems otherwise OK, except for the fact that the disk fans will sometimes start blowing at full blast when the the system is sitting completely idle and not stop until I reboot. Are the ECC errors in memory on the RAID controller? Or, does the RAID controller map in system memory, and the ECC errors are really in system memory? Or, are the ECC errors in the 1GB cache that resides in the RAID controller?

  Read the article

• Why is firefox 4 not HW accelerated?

  - by acidzombie24

  At first i thought it was my computer but then i tried chrome. Why isnt firefox not hardware accelerated? The first screenshot shows chrome at 23% usage. The 2nd shows 59%. I have 2 cpus which is why it isnt 100% usage. The game pictured is biolab Heres the text for about:support Application Basics Name Firefox Version 4.0 User Agent Mozilla/5.0 (Windows NT 6.1; WOW64; rv:2.0) Gecko/20100101 Firefox/4.0 Profile Directory Open Containing Folder Enabled Plugins about:plugins Build Configuration about:buildconfig Extensions Name Version Enabled ID Modified Preferences Name Value accessibility.typeaheadfind.flashBar 0 browser.places.importBookmarksHTML false browser.places.smartBookmarksVersion 2 browser.startup.homepage_override.buildID 20110303194838 browser.startup.homepage_override.mstone rv:2.0 extensions.lastAppVersion 4.0 gfx.font_rendering.directwrite.enabled true network.cookie.prefsMigrated true places.history.expiration.transient_current_max_pages 127602 privacy.sanitize.migrateFx3Prefs true Graphics Adapter Description Mobile Intel(R) 4 Series Express Chipset Family Vendor ID 8086 Device ID 2a42 Adapter RAM Unknown Adapter Drivers igdumd64 igd10umd64 igdumdx32 igd10umd32 Driver Version 8.15.10.2202 Driver Date 8-25-2010 Direct2D Enabled true DirectWrite Enabled true (6.1.7600.16385, font cache n/a) WebGL Renderer Google Inc. -- ANGLE -- OpenGL ES 2.0 (ANGLE 0.0.0.541) GPU Accelerated Windows 1/1 Direct3D 10

  Read the article

• How to install Konica Minolta PagePro 1300W to Windows 7 64-bit?

  - by jsalonen

  I recently switched to Windows 7 (Home Pro, 64-bit) to discover that my Konica Minolta PagePro 1300W printer no longer works. When connected, Win7 prompts that it can not install a driver for the device. I have done a lot of googling to solve this problem, with no luck so far. From Konica Minolta official website, I can find drivers only for Windows XP/2000. My current reasoning is that they currently don't and most likely are not going to support Win7 let alone 64-bit version of it for this rather old printer. So my question is: does anyone have any good tips on how to make this printer work on my system? Is there any other place I could look for drivers, or in generally, do you know any workarounds that could let me printer work? One of the workaround I have been considering is to install a Windows XP / Ubuntu Linux on a virtualbox and use that system when I really really need to printer. This is of course not the optimal solution, but would let me possibly to use the printer until I buy a newer model.

  Read the article

• What is my miniport's service name?

  - by Ian Boyd

  i am trying to query the physical sector size of my drive using fsutil: C:\Windows\system32>fsutil fsinfo ntfsinfo c: NTFS Volume Serial Number : 0x78cc11b2cc116c1e Version : 3.1 Number Sectors : 0x000000003a382fff Total Clusters : 0x00000000074705ff Free Clusters : 0x00000000022fc29b Total Reserved : 0x00000000000007d0 Bytes Per Sector : 512 Bytes Per Physical Sector : <Not Supported> Bytes Per Cluster : 4096 Bytes Per FileRecord Segment : 1024 Clusters Per FileRecord Segment : 0 Mft Valid Data Length : 0x00000000305c0000 Mft Start Lcn : 0x00000000000c0000 Mft2 Start Lcn : 0x0000000003a382ff Mft Zone Start : 0x0000000006951940 Mft Zone End : 0x0000000006951c80 RM Identifier: 19B22CBE-570D-19DE-9C72-CD758F800DDC You can see that the Bytes Per Physical Sector value is Not Supported: Bytes Per Physical Sector : <Not Supported> In KB Article Microsoft support policy for 4K sector hard drives in Windows, Microsoft says: If fsutil.exe continues to display "Bytes Per Physical Sector : " after you apply the latest storage driver and the required hotfixes, make sure that the following registry path exists: HKLM\CurrentControlSet\Services\<miniport’s service name>\Parameters\Device\ Name: EnableQueryAccessAlignment Type: REG_DWORD Value: 1: Enable The only thing i don't know is what my Miniport's service name is. What is my miniport's service name. i know that my SATA drives are in AHCI mode, and AHCI uses the msahci driver service: Is that my miniport service? "MSAHCI"? See also Hitachi - Advanced Format Technology Brief RMPrepUSB - Advanced Format (4K sector) hard disks Microsoft support policy for 4K sector hard drives in Windows OSR Online - Advance Disk Format support in Storport Virtual Mniport diver Default cluster size for NTFS, FAT, and exFAT Wikipedia - Advanced Format

  Read the article

< Previous Page | 448 449 450 451 452 453 454 455 456 457 458 459  | Next Page >