Search Results

Search found 12094 results on 484 pages for 'release notes'.

Page 453/484 | < Previous Page | 449 450 451 452 453 454 455 456 457 458 459 460  | Next Page >

• SQL SERVER – Weekly Series – Memory Lane – #038

  - by Pinal Dave

  Here is the list of selected articles of SQLAuthority.com across all these years. Instead of just listing all the articles I have selected a few of my most favorite articles and have listed them here with additional notes below it. Let me know which one of the following is your favorite article from memory lane. 2007 CASE Statement in ORDER BY Clause – ORDER BY using Variable This article is as per request from the Application Development Team Leader of my company. His team encountered code where the application was preparing string for ORDER BY clause of the SELECT statement. Application was passing this string as variable to Stored Procedure (SP) and SP was using EXEC to execute the SQL string. This is not good for performance as Stored Procedure has to recompile every time due to EXEC. sp_executesql can do the same task but still not the best performance. SSMS – View/Send Query Results to Text/Grid/Files Results to Text – CTRL + T Results to Grid – CTRL + D Results to File – CTRL + SHIFT + F 2008 Introduction to SPARSE Columns Part 2 I wrote about Introduction to SPARSE Columns Part 1. Let us understand the concept of the SPARSE column in more detail. I suggest you read the first part before continuing reading this article. All SPARSE columns are stored as one XML column in the database. Let us see some of the advantage and disadvantage of SPARSE column. Deferred Name Resolution How come when table name is incorrect SP can be created successfully but when an incorrect column is used SP cannot be created? 2009 Backup Timeline and Understanding of Database Restore Process in Full Recovery Model In general, databases backup in full recovery mode is taken in three different kinds of database files. Full Database Backup Differential Database Backup Log Backup Restore Sequence and Understanding NORECOVERY and RECOVERY While doing RESTORE Operation if you restoring database files, always use NORECOVER option as that will keep the database in a state where more backup file are restored. This will also keep database offline also to prevent any changes, which can create itegrity issues. Once all backup file is restored run RESTORE command with a RECOVERY option to get database online and operational. Four Different Ways to Find Recovery Model for Database Perhaps, the best thing about technical domain is that most of the things can be executed in more than one ways. It is always useful to know about the various methods of performing a single task. Two Methods to Retrieve List of Primary Keys and Foreign Keys of Database When Information Schema is used, we will not be able to discern between primary key and foreign key; we will have both the keys together. In the case of sys schema, we can query the data in our preferred way and can join this table to another table, which can retrieve additional data from the same. Get Last Running Query Based on SPID PID is returns sessions ID of the current user process. The acronym SPID comes from the name of its earlier version, Server Process ID. 2010 SELECT * FROM dual – Dual Equivalent Dual is a table that is created by Oracle together with data dictionary. It consists of exactly one column named “dummy”, and one record. The value of that record is X. You can check the content of the DUAL table using the following syntax. SELECT * FROM dual Identifying Statistics Used by Query Someone asked this question in my training class of query optimization and performance tuning.  “Can I know which statistics were used by my query?” 2011 SQL SERVER – Interview Questions and Answers – Frequently Asked Questions – Day 14 of 31 What are the basic functions for master, msdb, model, tempdb and resource databases? What is the Maximum Number of Index per Table? Explain Few of the New Features of SQL Server 2008 Management Studio Explain IntelliSense for Query Editing Explain MultiServer Query Explain Query Editor Regions Explain Object Explorer Enhancements Explain Activity Monitors SQL SERVER – Interview Questions and Answers – Frequently Asked Questions – Day 15 of 31 What is Service Broker? Where are SQL server Usernames and Passwords Stored in the SQL server? What is Policy Management? What is Database Mirroring? What are Sparse Columns? What does TOP Operator Do? What is CTE? What is MERGE Statement? What is Filtered Index? Which are the New Data Types Introduced in SQL SERVER 2008? SQL SERVER – Interview Questions and Answers – Frequently Asked Questions – Day 16 of 31 What are the Advantages of Using CTE? How can we Rewrite Sub-Queries into Simple Select Statements or with Joins? What is CLR? What are Synonyms? What is LINQ? What are Isolation Levels? What is Use of EXCEPT Clause? What is XPath? What is NOLOCK? What is the Difference between Update Lock and Exclusive Lock? SQL SERVER – Interview Questions and Answers – Frequently Asked Questions – Day 17 of 31 How will you Handle Error in SQL SERVER 2008? What is RAISEERROR? What is RAISEERROR? How to Rebuild the Master Database? What is the XML Datatype? What is Data Compression? What is Use of DBCC Commands? How to Copy the Tables, Schema and Views from one SQL Server to Another? How to Find Tables without Indexes? SQL SERVER – Interview Questions and Answers – Frequently Asked Questions – Day 18 of 31 How to Copy Data from One Table to Another Table? What is Catalog Views? What is PIVOT and UNPIVOT? What is a Filestream? What is SQLCMD? What do you mean by TABLESAMPLE? What is ROW_NUMBER()? What are Ranking Functions? What is Change Data Capture (CDC) in SQL Server 2008? SQL SERVER – Interview Questions and Answers – Frequently Asked Questions – Day 19 of 31 How can I Track the Changes or Identify the Latest Insert-Update-Delete from a Table? What is the CPU Pressure? How can I Get Data from a Database on Another Server? What is the Bookmark Lookup and RID Lookup? What is Difference between ROLLBACK IMMEDIATE and WITH NO_WAIT during ALTER DATABASE? What is Difference between GETDATE and SYSDATETIME in SQL Server 2008? How can I Check that whether Automatic Statistic Update is Enabled or not? How to Find Index Size for Each Index on Table? What is the Difference between Seek Predicate and Predicate? What are Basics of Policy Management? What are the Advantages of Policy Management? SQL SERVER – Interview Questions and Answers – Frequently Asked Questions – Day 20 of 31 What are Policy Management Terms? What is the ‘FILLFACTOR’? Where in MS SQL Server is ’100’ equal to ‘0’? What are Points to Remember while Using the FILLFACTOR Argument? What is a ROLLUP Clause? What are Various Limitations of the Views? What is a Covered index? When I Delete any Data from a Table, does the SQL Server reduce the size of that table? What are Wait Types? How to Stop Log File Growing too Big? If any Stored Procedure is Encrypted, then can we see its definition in Activity Monitor? 2012 Example of Width Sensitive and Width Insensitive Collation Width Sensitive Collation: A single-byte character (half-width) represented as single-byte and the same character represented as a double-byte character (full-width) are when compared are not equal the collation is width sensitive. In this example we have one table with two columns. One column has a collation of width sensitive and the second column has a collation of width insensitive. Find Column Used in Stored Procedure – Search Stored Procedure for Column Name Very interesting conversation about how to find column used in a stored procedure. There are two different characters in the story and both are having a conversation about how to find column in the stored procedure. Here are two part story Part 1 | Part 2 SQL SERVER – 2012 Functions – FORMAT() and CONCAT() – An Interesting Usage Generate Script for Schema and Data – SQL in Sixty Seconds #021 – Video In simple words, in many cases the database move from one place to another place. It is not always possible to back up and restore databases. There are possibilities when only part of the database (with schema and data) has to be moved. In this video we learn that we can easily generate script for schema for data and move from one server to another one. INFORMATION_SCHEMA.COLUMNS and Value Character Maximum Length -1 I often see the value -1 in the CHARACTER_MAXIMUM_LENGTH column of INFORMATION_SCHEMA.COLUMNS table. I understand that the length of any column can be between 0 to large number but I do not get it when I see value in negative (i.e. -1). Any insight on this subject? Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Memory Lane, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• HTML5 and Visual Studio 2010

  - by Harish Ranganathan

  All of us work with Visual Studio (or the free Visual Web Developer Express Edition) for developing web applications targeting ASP.NET / ASP.NET MVC or Silverlight etc.,  Over the years, Visual Studio has grown to a great extent.  From being a simple limited functionality tool in VS.NET 2002 to the multi-faceted, MEF driven Visual Studio 2010, it has come a long way.  And as much as Visual Studio supports rapid web development by generating HTML mark up, it also added intellisense for some of the HTML specifications that one has otherwise monotonously type every time.  Ex.- In Visual Studio 2010, one can just type the angular bracket “<” and then the first keyword “h” or “x” for html or xhtml respectively and then press tab twice and it would render the entire markup required for XHTML or HTML 1.0/1.1 strict/transitional and the fully qualified W3C URL. The same holds good for specifying HTML type declaration.  Now, the difference between HTML and XHTML has been discussed in detail already, though, if you are interested to know, you can read it from http://www.w3schools.com/xhtml/xhtml_html.asp But, the industry trend or the buzz around is HTML5.  With browsers like IE9 Beta, Google Chrome, Firefox 4 etc., supporting HTML5 standards big time, everyone wants to start developing HTML5 based websites. VS developers (like me) often get the question around when would VS start supporting HTML5.  VS 2010 was released last year and HTML5 is still specifications under development.  Clearly, with the timelines we started developing Visual Studio (way back in 2008), HTML5 specs were almost non-existent.  Even today, the HTML5 body recommends not to fully depend on the entire mark up set as they are still under development specs and might change in the future. However, with Visual Studio 2010 SP1 beta, there is quite a bit of support for HTML5 based web development.  In fact, one of my colleagues pointed out that SP1 beta’s major enhancement is its ability to support HTML5 tags and even add server mode to them. Lets look at the existing validation schema available in Visual Studio (Tools – Options – Validation) This is before installing Visual Studio 2010 SP1 Beta.  Clearly, the validation options are restricted to HTML 4.01 and XHTML 1.1 transitional and below. Also, lets consider using some of the new HTML5 input type elements.  (I found out this, just today from my friend, also an, ASP.NET team member) <input type=”email”> is one of the new input type elements according to the HTML5 specification.  Now, this works well if you type it as is  in Visual Studio and the page renders without any issue (since the default behaviour is, if there is an “undefined” type specified to input tag, it would fall back on the default mode, which is text. The moment you add <input type=”email” runat=”server” >, you get an error Naturally you don’t get intellisense support as well for these new tags.  Once you install Visual Studio 2010 Service Pack 1 Beta from here (it takes a while so you need to be patient for the installation to complete), you will start getting additional Validation templates for HTML5, as below:- Once you set this, you can start using HTML5 elements in your web page without getting errors/warnings.  Look at the screen shot below, for the new “video” tag which is showing up in intellisense (video is a part of the new HTML5 specifications)     note that, you still need to hook up the <!DOCTYPE html /> on the top manually as it doesn’t change automatically  (from the default XHTML 1.0 strict) when you create a new page. Also, the new input type tags in HTML5 are also supported One, can also use the <asp:TextBox type=”email” which would in turn generate the <input type=”email”> markup when the page is rendered.  In fact, as of SP1 beta, this is the only way to put the new input type tags with the runat=”server” attribute (otherwise you will get the parser error mentioned above.  This issue would be fixed by the final release of SP1 beta) Going further, there may be more support for having server tags for some of the common HTML5 elements, but this is work in progress currently. So, other than not having runat=”server” support for the new HTML5  input tags, you can pretty much build and target HTML5 websites with Visual Studio 2010 SP1 Beta, today.  For those who are running Visual Studio 2008, you also have the “HTML5 intellisense for Visual Studio 2010 and 2008” available for download, from http://visualstudiogallery.msdn.microsoft.com/d771cbc8-d60a-40b0-a1d8-f19fc393127d/ Note that, if you are running Visual Studio 2010, the recommended approach is to install the SP1 beta which would be the way forward for HTML5 support in Visual Studio. Of course, you need to test these on a browser supporting HTML5 such as IE9 Beta or Chrome or FireFox 4.  You can download IE9 Beta from here You can also follow the Visual Web Developer Team Blog for more updates on the stuff they are building. Cheers !!!

  Read the article

• F# for the C# Programmer

  - by mbcrump

  Are you a C# Programmer and can’t make it past a day without seeing or hearing someone mention F#?  Today, I’m going to walk you through your first F# application and give you a brief introduction to the language. Sit back this will only take about 20 minutes. Introduction Microsoft's F# programming language is a functional language for the .NET framework that was originally developed at Microsoft Research Cambridge by Don Syme. In October 2007, the senior vice president of the developer division at Microsoft announced that F# was being officially productized to become a fully supported .NET language and professional developers were hired to create a team of around ten people to build the product version. In September 2008, Microsoft released the first Community Technology Preview (CTP), an official beta release, of the F# distribution . In December 2008, Microsoft announced that the success of this CTP had encouraged them to escalate F# and it is now will now be shipped as one of the core languages in Visual Studio 2010 , alongside C++, C# 4.0 and VB. The F# programming language incorporates many state-of-the-art features from programming language research and ossifies them in an industrial strength implementation that promises to revolutionize interactive, parallel and concurrent programming. Advantages of F# F# is the world's first language to combine all of the following features: Type inference: types are inferred by the compiler and generic definitions are created automatically. Algebraic data types: a succinct way to represent trees. Pattern matching: a comprehensible and efficient way to dissect data structures. Active patterns: pattern matching over foreign data structures. Interactive sessions: as easy to use as Python and Mathematica. High performance JIT compilation to native code: as fast as C#. Rich data structures: lists and arrays built into the language with syntactic support. Functional programming: first-class functions and tail calls. Expressive static type system: finds bugs during compilation and provides machine-verified documentation. Sequence expressions: interrogate huge data sets efficiently. Asynchronous workflows: syntactic support for monadic style concurrent programming with cancellations. Industrial-strength IDE support: multithreaded debugging, and graphical throwback of inferred types and documentation. Commerce friendly design and a viable commercial market. Lets try a short program in C# then F# to understand the differences. Using C#: Create a variable and output the value to the console window: Sample Program. using System;   namespace ConsoleApplication9 {     class Program     {         static void Main(string[] args)         {             var a = 2;             Console.WriteLine(a);             Console.ReadLine();         }     } } A breeze right? 14 Lines of code. We could have condensed it a bit by removing the “using” statment and tossing the namespace. But this is the typical C# program. Using F#: Create a variable and output the value to the console window: To start, open Visual Studio 2010 or Visual Studio 2008. Note: If using VS2008, then please download the SDK first before getting started. If you are using VS2010 then you are already setup and ready to go. So, click File-> New Project –> Other Languages –> Visual F# –> Windows –> F# Application. You will get the screen below. Go ahead and enter a name and click OK. Now, you will notice that the Solution Explorer contains the following: Double click the Program.fs and enter the following information. Hit F5 and it should run successfully. Sample Program. open System let a = 2        Console.WriteLine a As Shown below: Hmm, what? F# did the same thing in 3 lines of code. Show me the interactive evaluation that I keep hearing about. The F# development environment for Visual Studio 2010 provides two different modes of execution for F# code: Batch compilation to a .NET executable or DLL. (This was accomplished above). Interactive evaluation. (Demo is below) The interactive session provides a > prompt, requires a double semicolon ;; identifier at the end of a code snippet to force evaluation, and returns the names (if any) and types of resulting definitions and values. To access the F# prompt, in VS2010 Goto View –> Other Window then F# Interactive. Once you have the interactive window type in the following expression: 2+3;; as shown in the screenshot below: I hope this guide helps you get started with the language, please check out the following books for further information. F# Books for further reading   Foundations of F# Author: Robert Pickering An introduction to functional programming with F#. Including many samples, this book walks through the features of the F# language and libraries, and covers many of the .NET Framework features which can be leveraged with F#.       Functional Programming for the Real World: With Examples in F# and C# Authors: Tomas Petricek and Jon Skeet An introduction to functional programming for existing C# developers written by Tomas Petricek and Jon Skeet. This book explains the core principles using both C# and F#, shows how to use functional ideas when designing .NET applications and presents practical examples such as design of domain specific language, development of multi-core applications and programming of reactive applications.

  Read the article

• Oracle SQL Developer v3.2.1 Now Available

  - by thatjeffsmith

  Oracle SQL Developer version 3.2.1 is now available. I recommend that everyone now upgrade to this release. It features more than 200 bug fixes, tweaks, and polish applied to the 3.2 edition. The high profile bug fixes submitted by customers and users on our forums are listed in all their glory for your review. I want to highlight a few of the changes though, as I recognize many of you lack the time and/or patience to ‘read the docs.’ That would include me, which is why I enjoy writing these kinds of blog posts. I’m lazy – just like you! No more artificial line breaks between CREATE OR REPLACE and your PL/SQL In versions 3.2 and older, when you pull up your stored procedural objects in our editor, you would see a line break inserted between the CREATE OR REPLACE and then the body of your code. In version 3.2.1, we have removed the line break. 3.1 3.2.1 Trivia Did You Know? The database doesn’t store the ‘CREATE’ or ‘CREATE OR REPLACE’ bit of your PL/SQL code in the database. If we look at the USER_SOURCE view, we can see that the code begins with the object name. So the CREATE OR REPLACE bit is ‘artificial’ The intent is to give you the code necessary to recreate your object – and have it ‘compile’ into the database. We pretty much HAVE to add the ‘CREATE OR REPLACE.’ From now on it will appear inline with the first line of your code. Exporting Tables & Views When exporting data from your tables or views, previous versions of SQL Developer presented a 3 step wizard. It allows you to choose your columns and apply data filters for what is exported. This was kind of redundant. The grids already allowed you to select your columns and apply filters. Wouldn’t it be more intuitive AND efficient to just make the grids behave in a What You See Is What You Get (WYSIWYG) fashion? In version 3.2.1, that is exactly what will happen. The wizard now only has two steps and the grid will export the data and columns as defined in the visible grid. Let the grid properties define what is actually exported! And here is what is pasted into my worksheet: "BREWERY"|"CITY" "3 Brewers Restaurant Micro-Brewery"|"Toronto" "Amsterdam Brewing Co."|"Toronto" "Ball Brewing Company Ltd."|"Toronto" "Big Ram Brewing Company"|"Toronto" "Black Creek Historic Brewery"|"Toronto" "Black Oak Brewing"|"Toronto" "C'est What?"|"Toronto" "Cool Beer Brewing Company"|"Toronto" "Denison's Brewing"|"Toronto" "Duggan's Brewery"|"Toronto" "Feathers"|"Toronto" "Fermentations! - Danforth"|"Toronto" "Fermentations! - Mount Pleasant"|"Toronto" "Granite Brewery & Restaurant"|"Toronto" "Labatt's Breweries of Canada"|"Toronto" "Mill Street Brew Pub"|"Toronto" "Mill Street Brewery"|"Toronto" "Molson Breweries of Canada"|"Toronto" "Molson Brewery at Air Canada Centre"|"Toronto" "Pioneer Brewery Ltd."|"Toronto" "Post-Production Bistro"|"Toronto" "Rotterdam Brewing"|"Toronto" "Steam Whistle Brewing"|"Toronto" "Strand Brasserie"|"Toronto" "Upper Canada Brewing"|"Toronto" JUST what I wanted And One Last Thing Speaking of export, sometimes I want to send data to Excel. And sometimes I want to send multiple objects to Excel – to a single Excel file that is. In version 3.2.1 you can now do that. Let’s export the bulk of the HR schema to Excel, with each table going to it’s own workbook in the same worksheet. Select many tables, put them in in a single Excel worksheet If you try this in previous versions of SQL Developer it will just write the first table to the Excel file. This is one of the bugs we addressed in v3.2.1. Here is what the output Excel file looks like now: Many tables - Many workbooks in an Excel Worksheet I have a sneaky suspicion that this will be a frequently used feature going forward. Excel seems to be the cornerstone of many of our popular features. Imagine that!

  Read the article

• Create Orchard Module in a Separate Project

  - by Steve Michelotti

  The Orchard Project is a new OOS Microsoft project that is being developed up on CodePlex. From the Orchard home page on CodePlex, it states “Orchard project is focused on delivering a .NET-based CMS application that will allow users to rapidly create content-driven Websites, and an extensibility framework that will allow developers and customizers to provide additional functionality through modules and themes.” The Orchard Project site contains additional information including documentation and walkthroughs. The ability to create a composite solution based on a collection of modules is a compelling feature. In Orchard, these modules can just be created as simple MVC Areas or they can also be created inside of stand-alone web application projects.  The walkthrough for writing an Orchard module that is available on the Orchard site uses a simple Area that is created inside of the host application. It is based on the Orchard MIX presentation. This walkthrough does an effective job introducing various Orchard concepts such as hooking into the navigation system, theme/layout system, content types, and more.  However, creating an Orchard module in a separate project does not seem to be concisely documented anywhere. Orchard ships with several module OOTB that are in separate assemblies – but again, it’s not well documented how to get started building one from scratch. The following are the steps I took to successfully get an Orchard module in a separate project up and running. Step 1 – Download the OrchardIIS.zip file from the Orchard Release page. Unzip and open up the solution. Step 2 – Add your project to the solution. I named my project “Orchard.Widget” and used and “MVC 2 Empty Web Application” project type. Make sure you put the physical path inside the “Modules” sub-folder to the main project like this: At this point the solution should look like: Step 3 – Add assembly references to Orchard.dll and Orchard.Core.dll. Step 4 – Add a controller and view.  I’ll just create a Hello World controller and view. Notice I created the view as a partial view (*.ascx). Also add the [Themed] attribute to the top of the HomeController class just like the normal Orchard walk through shows it. Step 5 – Add Module.txt to the project root. The is a very important step. Orchard will not recognize your module without this text file present.  It can contain just the name of your module: name: Widget Step 6 – Add Routes.cs. Notice I’ve given an area name of “Orchard.Widget” on lines 26 and 33. 1: using System; 2: using System.Collections.Generic; 3: using System.Web.Mvc; 4: using System.Web.Routing; 5: using Orchard.Mvc.Routes; 6:   7: namespace Orchard.Widget 8: { 9: public class Routes : IRouteProvider 10: { 11: public void GetRoutes(ICollection<RouteDescriptor> routes) 12: { 13: foreach (var routeDescriptor in GetRoutes()) 14: { 15: routes.Add(routeDescriptor); 16: } 17: } 18:   19: public IEnumerable<RouteDescriptor> GetRoutes() 20: { 21: return new[] { 22: new RouteDescriptor { 23: Route = new Route( 24: "Widget/{controller}/{action}/{id}", 25: new RouteValueDictionary { 26: {"area", "Orchard.Widget"}, 27: {"controller", "Home"}, 28: {"action", "Index"}, 29: {"id", ""} 30: }, 31: new RouteValueDictionary(), 32: new RouteValueDictionary { 33: {"area", "Orchard.Widget"} 34: }, 35: new MvcRouteHandler()) 36: } 37: }; 38: } 39: } 40: } Step 7 – Add MainMenu.cs. This will make sure that an item appears in the main menu called “Widget” which points to the module. 1: using System; 2: using Orchard.UI.Navigation; 3:   4: namespace Orchard.Widget 5: { 6: public class MainMenu : INavigationProvider 7: { 8: public void GetNavigation(NavigationBuilder builder) 9: { 10: builder.Add(menu => menu.Add("Widget", item => item.Action("Index", "Home", new 11: { 12: area = "Orchard.Widget" 13: }))); 14: } 15:   16: public string MenuName 17: { 18: get { return "main"; } 19: } 20: } 21: } Step 8 – Clean up web.config. By default Visual Studio adds numerous sections to the web.config. The sections that can be removed are: appSettings, connectionStrings, authentication, membership, profile, and roleManager. Step 9 – Delete Global.asax. This project will ultimately be running from inside the Orchard host so this “sub-site” should not have its own Global.asax.   Now you’re ready the run the app.  When you first run it, the “Widget” menu item will appear in the main menu because of the MainMenu.cs file we added: We can then click the “Widget” link in the main menu to send us over to our view:   Packaging From start to finish, it’s a relatively painless experience but it could be better. For example, a Visual Studio project template that encapsulates aspects from this blog post would definitely make it a lot easier to get up and running with creating an Orchard module.  Another aspect I found interesting is that if you read the first paragraph of the walkthrough, it says, “You can also develop modules as separate projects, to be packaged and shared with other users of Orchard CMS (the packaging story is still to be defined, along with marketplaces for sharing modules).” In particular, I will be extremely curious to see how the “packaging story” evolves. The first thing that comes to mind for me is: what if we explored MvcContrib Portable Areas as a potential mechanism for this packaging? This would certainly make things easy since all artifacts (aspx, aspx, images, css, javascript) are all wrapped up into a single assembly. Granted, Orchard does have its own infrastructure for layouts and themes but it seems like integrating portable areas into this pipeline would not be a difficult undertaking. Maybe that’ll be the next research task. :)

  Read the article

• Dual Boot Oracle Solaris 11/11 and Linux (Ubuntu 11.10/grub2)

  - by HartmutStreppel

  After having worked with Open Solaris on my laptop first, then with an upgrade to Oracle Solaris 11 Express, I finally did a fresh install of Oracle Solaris 11/11, when it became available. I am not a big fan of upgrades as I know that I am not the perfect administrator and my system gets spoiled with unclean configurations, outdated packages and wrong settings that cannot be reversed. So I prefer to start from scratch. Especially with Oracle Solaris 11 I wanted to have a system just like a customer would have it in production. The installation was smooth - more or less, if I had only read the documentation a bit better in advance. For a number of reasons I prefer a dual boot system. The most important one is, that especially with mobile devices you often run into network problems. And you have a hard time figuring out where the problem is: in your laptop hardware, in the OS you are running, or really within the network. If you have an alternate OS to boot, you can exclude the OS and your hardware. This makes you feel better. The second OS should be a Linux variant - and for some not so obvious reason I decided to go with the latest Ubuntu release (11.10). It replaced a very old Open Suse installation that had not been booted for a while. I knew that it was probably best to install Ubuntu first and then Oracle Solaris 11, as this would put the right boot information for Oracle Solaris  into the MBR and onto the root partition. But then, how to enable dual boot with the 2 OSes. Searching the web one mainly finds information about dual boot of: Linux and Linux Linux and Windows I do not want to explain which wrong configurations I worked through, but I prefer to explain the final setup, which is extremely simple, and I am wondering why this is not covered as the easiest solution for most dual boot setups. I use chainloader from and to both OS'es, with the only disadvantage that I have to confirm two grub menus each time I want to boot the "other" OS. Still there were some hurdles to jump over: Ubuntu did not like getting its boot blocks being placed on the partition instead of the disk; I must admit that I do not fully understand why. But using the --force option you could get that done Ubuntu needs an active partition; that was easy to achieve grub2 uses a different numbering scheme for the partitions. That is in the docs, if you read them. BTW: The usual disclaimer is valid. There is  no guarantee that what I describe works or works well. Please back up your data carefully before trying any of this. So, Oracle Solaris 11 is installed on the first partition and Ubuntu on the third. With Ubtuntu things initially were a bit more complicated, as I did not know how to boot it. And the live CD did not offer the capability to boot the on-disk image (at least I did not find it). So I booted the live CD, mounted the Ubuntu installation at /mnt and wrote the boot blocks into the partition. This is something that does not seem to be recommended, at least grub-install refrained from doing what I intended. After a bit more research I was bold enough to use the --force option and wrote the boot blocks to /dev/sda3 using grub-install --boot-directory=/mnt/boot --force --no-floppy /dev/sda3 So, I now had a system with the Solaris boot loader in the MBR, Solaris specific boot blocks on the Solaris root partition and Ubuntu specific boot blocks in the Ubuntu partition. I just had to chain them together and I was done. Oracle Solaris 11: I have added the following lines to /rpool/boot/grub/menu.lst (be aware of the /rpool!!!!) title Ubuntu 11.10root (hd0,2)makeactivechainloader +1boot The Ubuntu root file system sits on the third partition (/dev/sda3). Ubuntu: I have added the following lines to /etc/grub.d/40_custom: menuentry "Solaris 11/11" {      set root=(hd0,1)      chainloader +1} Two things need to be mentioned: a) grub2 starts numbering partitions with 1; so my /dev/sda1 is partition 1. b) Oracle Solaris boots without the partition being made active (btw: the command to make a partition active with grub2 is "parttool (hd0,1) boot+", which currently does not work for me). As debugging grub is a bit complicated, I used the grub CLI to perform some tests and also used a tool, that I found on sourceforge.net that was able to prepare a list of all boot loaders on all partitions. This told me that the basic setup was correct. Unfortunately I lost it in the live CD environment. I hope this is helpful for some of the readers.Hartmut

  Read the article

• SQL SERVER – Weekly Series – Memory Lane – #049

  - by Pinal Dave

  Here is the list of selected articles of SQLAuthority.com across all these years. Instead of just listing all the articles I have selected a few of my most favorite articles and have listed them here with additional notes below it. Let me know which one of the following is your favorite article from memory lane. 2007 Two Connections Related Global Variables Explained – @@CONNECTIONS and @@MAX_CONNECTIONS @@CONNECTIONS Returns the number of attempted connections, either successful or unsuccessful since SQL Server was last started. @@MAX_CONNECTIONS Returns the maximum number of simultaneous user connections allowed on an instance of SQL Server. The number returned is not necessarily the number currently configured. Query Editor – Microsoft SQL Server Management Studio This post may be very simple for most of the users of SQL Server 2005. Earlier this year, I have received one question many times – Where is Query Analyzer in SQL Server 2005? I wrote small post about it and pointed many users to that post – SQL SERVER – 2005 Query Analyzer – Microsoft SQL SERVER Management Studio. Recently I have been receiving similar question. OUTPUT Clause Example and Explanation with INSERT, UPDATE, DELETE SQL Server 2005 has a new OUTPUT clause, which is quite useful. OUTPUT clause has access to insert and deleted tables (virtual tables) just like triggers. OUTPUT clause can be used to return values to client clause. OUTPUT clause can be used with INSERT, UPDATE, or DELETE to identify the actual rows affected by these statements. OUTPUT clause can generate a table variable, a permanent table, or temporary table. Even though, @@Identity will still work with SQL Server 2005, however I find the OUTPUT clause very easy and powerful to use. Let us understand the OUTPUT clause using an example. Find Name of The SQL Server Instance Based on database server stored procedures has to run different logic. We came up with two different solutions. 1) When database schema is very much changed, we wrote completely new stored procedure and deprecated older version once it was not needed. 2) When logic depended on Server Name we used global variable @@SERVERNAME. It was very convenient while writing migrating script which depended on the server name for the same database. Explanation of TRY…CATCH and ERROR Handling With RAISEERROR Function One of the developers at my company thought that we can not use the RAISEERROR function in new feature of SQL Server 2005 TRY… CATCH. When asked for an explanation he suggested SQL SERVER – 2005 Explanation of TRY… CATCH and ERROR Handling article as excuse suggesting that I did not give example of RAISEERROR with TRY…CATCH. We all thought it was funny. Just to keep records straight, TRY… CATCH can sure use RAISEERROR function. Different Types of Cache Objects Serveral kinds of objects can be stored in the procedure cache: Compiled Plans: When the query optimizer finishes compiling a query plan, the principal output is compiled plan. Execution contexts: While executing a compiled plan, SQL Server has to keep track of information about the state of execution. Cursors: Cursors track the execution state of server-side cursors, including the cursor’s current location within a resultset. Algebrizer trees: The Algebrizer’s job is to produce an algebrizer tree, which represents the logic structure of a query. Open SSMS From Command Prompt – sqlwb.exe Example This article is written by request and suggestion of Sr. Web Developer at my organization. Due to the nature of this article most of the content is referred from Book On-Line. sqlwbcommand prompt utility which opens SQL Server Management Studio. Squib command does not run queries from the command prompt. sqlcmd utility runs queries from command prompt, read for more information. 2008 Puzzle – Solution – Computed Columns Datatype Explanation Just a day before I wrote article SQL SERVER – Puzzle – Computed Columns Datatype Explanation which was inspired by SQL Server MVP Jacob Sebastian. I suggest that before continuing this article read the original puzzle question SQL SERVER – Puzzle – Computed Columns Datatype Explanation.The question was if the computed column was of datatype TINYINT how to create a Computed Column of datatype INT? 2008 – Find If Index is Being Used in Database It is very often I get a query that how to find if any index is being used in the database or not. If any database has many indexes and not all indexes are used it can adversely affect performance. If the number of indices are higher it reduces the INSERT / UPDATE / DELETE operation but increase the SELECT operation. It is recommended to drop any unused indexes from table to improve the performance. 2009 Interesting Observation – Execution Plan and Results of Aggregate Concatenation Queries If you want to see what’s going on here, I think you need to shift your point of view from an implementation-centric view to an ANSI point of view. ANSI does not guarantee processing the order. Figure 2 is interesting, but it will be potentially misleading if you don’t understand the ANSI rule-set SQL Server operates under in most cases. Implementation thinking can certainly be useful at times when you really need that multi-million row query to finish before the backup fire off, but in this case, it’s counterproductive to understanding what is going on. SQL Server Management Studio and Client Statistics Client Statistics are very important. Many a times, people relate queries execution plan to query cost. This is not a good comparison. Both parameters are different, and they are not always related. It is possible that the query cost of any statement is less, but the amount of the data returned is considerably larger, which is causing any query to run slow. How do we know if any query is retrieving a large amount data or very little data? 2010 I encourage all of you to go through complete series and write your own on the subject. If you write an article and send it to me, I will publish it on this blog with due credit to you. If you write on your own blog, I will update this blog post pointing to your blog post. SQL SERVER – ORDER BY Does Not Work – Limitation of the View 1 SQL SERVER – Adding Column is Expensive by Joining Table Outside View – Limitation of the View 2 SQL SERVER – Index Created on View not Used Often – Limitation of the View 3 SQL SERVER – SELECT * and Adding Column Issue in View – Limitation of the View 4 SQL SERVER – COUNT(*) Not Allowed but COUNT_BIG(*) Allowed – Limitation of the View 5 SQL SERVER – UNION Not Allowed but OR Allowed in Index View – Limitation of the View 6 SQL SERVER – Cross Database Queries Not Allowed in Indexed View – Limitation of the View 7 SQL SERVER – Outer Join Not Allowed in Indexed Views – Limitation of the View 8 SQL SERVER – SELF JOIN Not Allowed in Indexed View – Limitation of the View 9 SQL SERVER – Keywords View Definition Must Not Contain for Indexed View – Limitation of the View 10 SQL SERVER – View Over the View Not Possible with Index View – Limitations of the View 11 SQL SERVER – Get Query Running in Session I was recently looking for syntax where I needed a query running in any particular session. I always remembered the syntax and ha d actually written it down before, but somehow it was not coming to mind quickly this time. I searched online and I ended up on my own article written last year SQL SERVER – Get Last Running Query Based on SPID. I felt that I am getting old because I forgot this really simple syntax. Find Total Number of Transaction on Interval In one of my recent Performance Tuning assignments I was asked how do someone know how many transactions are happening on a server during certain interval. I had a handy script for the same. Following script displays transactions happened on the server at the interval of one minute. You can change the WAITFOR DELAY to any other interval and it should work. 2011 Here are two DMV’s which are newly introduced in SQL Server 2012 and provides vital information about SQL Server. DMV – sys.dm_os_volume_stats – Information about operating system volume DMV – sys.dm_os_windows_info – Information about Operating System SQL Backup and FTP – A Quick and Handy Tool I have used this tool extensively since 2009 at numerous occasion and found it to be very impressive. What separates it from the crowd the most – it is it’s apparent simplicity and speed. When I install SQLBackupAndFTP and configure backups – all in 1 or 2 minutes, my clients are always impressed. Quick Note about JOIN – Common Questions and Simple Answers In this blog post we are going to talk about join and lots of things related to the JOIN. I recently started office hours to answer questions and issues of the community. I receive so many questions that are related to JOIN. I will share a few of the same over here. Most of them are basic, but note that the basics are of great importance. 2012 Importance of User Without Login Question: “In recent version of SQL Server we can create user without login. What is the use of it?” Great question indeed. Let me first attempt to answer this question but after reading my answer I need your help. I want you to help him as well with adding more value to it. Preserve Leading Zero While Coping to Excel from SSMS Earlier I wrote two articles about how to efficiently copy data from SSMS to Excel. Since I wrote that post there are plenty of interest generated on this subject. There are a few questions I keep on getting over this subject. One of the question is how to get the leading zero preserved while copying the data from SSMS to Excel. Well it is almost the same way as my earlier post SQL SERVER – Excel Losing Decimal Values When Value Pasted from SSMS ResultSet. The key here is in EXCEL and not in SQL Server. Solution – 2 T-SQL Puzzles – Display Star and Shortest Code to Display 1 Earlier on this blog we had asked two puzzles. The response from all of you is nothing but Amazing. I have received 350+ responses. Many are valid and many were indeed something I had not thought about it. I strongly suggest you read all the puzzles and their answers here - trust me if you start reading the comments you will not stop till you read every single comment. Seriously trust me on it. Personally I have learned a lot from it. Identify Most Resource Intensive Queries – SQL in Sixty Seconds #028 – Video http://www.youtube.com/watch?v=TvlYy-TGaaA Importance of User Without Login – T-SQL Demo Script Earlier I wrote a blog post about SQL SERVER – Importance of User Without Login and my friend and SQL Expert Vinod Kumar has written excellent follow up blog post about Contained Databases inside SQL Server 2012. Now lots of people asked me if I can also explain the same concept again so here is the small demonstration for it. Let me show you how login without user can help. Before we continue on this subject I strongly recommend that you read my earlier blog post here. In following demo I am going to demonstrate following situation. Login using the System Admin account Create a user without login Checking Access Impersonate the user without login Checking Access Revert Impersonation Give Permission to user without login Impersonate the user without login Checking Access Revert Impersonation Clean up Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Memory Lane, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• Stir Trek: Iron Man Edition Recap and Photos

  - by Brian Jackett

  If you’ve noticed my blogging activity has reduced in frequency and technical content lately it’s primarily due to all of the conferences I’ve been attending, speaking at, or planning in the past few months.  This past Friday myself and six other dedicated individuals put on Stir Trek: Iron Man Edition as the culmination of a few months of hard work.  For those unfamiliar, Stir Trek is a web developer conference that was founded last year as an event to showcase content from Microsoft’s MIX conference and end the day with a private showing of the then just-released Star Trek movie.  This year’s conference expanded from 2 to 4 content tracks and upped the number of tickets from 350 to 600.  Even more amazing was the fact that we had 592 people show up day of the event for the lowest drop-off percentage of any conference I’ve been to before.   Nerd Dinner and Swag Bags     The night before Stir Trek: Iron Man Edition we hosted a nerd dinner at the Polaris Shopping mall food court with about 30 in attendance.  Nerd dinners are a great time to meet others passionate about technology and socialize before the whirlwind of the conference hits.  After the nerd dinner 20+ volunteers headed to the conference location and helped us stuff swag bags.  This in and of itself was a monumental task of putting together 600 swag bags with numerous leaflets, sponsor items, and t-shirts.  A big thanks goes out to all who assisted us that night so that we could finish in just under 2 hours instead of taking all night.  My sleep schedule also thanks you. Morning of Stir Trek     After getting a decent amount of sleep I arrived at Marcus Crosswoods theater at 6am to begin setting up for the day.  Myself and Jody Morgan were in charge of registration so we got tables set up, laid out swag bags, and organized our volunteer crew to assist with checking-in attendees.  Despite having 600+ people registration went fairly smoothly and got the day off to a great start.  I especially appreciated the 3+ cups of coffee from Crimson Cup, a local coffee shop.  For any of you that know me you’ll know that I rarely drink coffee except a few times a year when I really need the energy, so that says a lot about how good their coffee is.   Conference Starts     Once registration was completed the day kicked off with Molly Holzschlag keynoting.  Unfortunately Molly suffered from an ear infection and wasn’t able to fly so she had a virtual keynote and a session later in the day.  I was working behind the scenes on various tasks so I was only able to drop in very briefly on the keynote and rest of the morning sessions.  Throughout the day I tried to grab at least 1 or 2 pics of each presenter.  See my album below for the full set of pics.      For lunch we ordered around 150 pizzas from Mellow Mushroom, a local pizza place (notice the theme of supporting local businesses.)  Early on we were concerned about Mellow Mushroom being able to supply that many pizzas and get them delivered (still hot) to the theater, but they did an excellent job day of the event.  I wish I had gotten some pictures of the old school VW van they delivered the pizza in, but I was just a bit busy running around trying to get theaters ready for lunch.  We had attendees from last year who specifically requested that we have Mellow Mushroom supply lunch this year and I’m glad everything worked out being able to use them again.     During the afternoon I was able to attend a few sessions and hear some great content from various speakers.  It was also nice to just sit down and get off my feet for a bit.  After the last sessions the day concluded with a raffle.  There were a few logistical and technical issues that hampered our ability to smoothly conduct the raffle.  To those of you that agree the raffle wasn’t the smoothest experience I would like to say that the Stir Trek planning committee has already begun meeting to discuss ways of improving the conference for next year.  We are also accepting feedback (both positive and negative) at the following link: click here.  If you don’t wish to use the Joind In site you can also email me directly and I’ll be sure to pass along the feedback.   Iron Man 2 Movie     Last but not least, what Stir Trek event would be complete without the feature movie.  This year’s movie was Iron Man 2.  The theater had some really cool props and promotions (see pic below) for the movie.  I really enjoyed Iron Man 2, but I would recommend brushing up on the Iron Man comics and Marvel’s plans for future movies to understand some of the plot elements that come up.  Also make sure you stay through to the end of the movie credits to see a sneak peak of something special, that’s all I’ll say. Conclusion     Again a big thanks goes out to all of the speakers, sponsors, attendees, movie theater staff, volunteers, and everyone else involved in making this event great.  Also big thanks to my fellow Stir Trek planning committee members: Jeff Blankenburg, Matt Casto, Carey Payette, Jody Morgan, Rick Kierner, and Sarah Dutkiewitcz.  I am grateful for everything I learned while helping plan this event and look forward to being involved again next year.  For those interested we are currently targeting Thor as our movie theme for 2011 and then The Avengers for 2012.  These are tentative based on release dates that could shift as we get closer, but for now look solid.   Photos Pics on Facebook (includes tagging)     Stir Trek: Iron Man Edition photos on Facebook Pics on Live site (higher res)      View Full Album         -Frog Out

  Read the article

• Fusion HCM SaaS – Integration

  - by Kiran Mundy

  v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Fusion HCM SaaS – Integration A typical implementation pattern we’re seeing with Fusion Apps early adopters is implementing a few Fusion HCM applications that bring the most benefit to their company with the least disruption to existing programs and interfaces. Very often this ends up being Fusion Goals & Performance, Talent, Compensation or Benefits, often with Taleo for recruiting. The implementation picture looks like what you see below: Here, you can see that all the “downstream integrations” from the On-Premise Core HR, are unaffected because the master for employee data is still your On-Premise Core HR system – all updates and new hires are made here (although they may be fed in from Taleo to start with). As a second phase when customers migrate Core HR to Fusion HCM, they have to come up with a strategy to manage integrations to all their downstream applications that require employee details. For customers coming from EBS HR, a short term strategy that allows for minimal impact, is to extract employee data from Fusion (Via HCM Extract), and load the shared EBS HR tables (which are part of an EBS Financials install anyways), and let your downstream integrations continue to function based on this data as shown below. If you are not coming from EBS HR and there are license implications, you may want to consider: Creating an On-Premise warehouse for extracting data from Fusion Apps. Leveraging Fusion Apps Web Services (available to SaaS customers starting R7) to directly retrieve/write data to Fusion Apps. Integration Tools File Based Loader This is the primary mechanism for loading HCM data (both initial load and incremental updates) into Fusion HCM. Employee & related data can be uploaded into Fusion HCM using File Based Loader. Note that ability to schedule File Based Loader to run on a pre-defined schedule will be available as a patch on top of Rel 5. Hr2Hr has been deprecated in favor of File Based Loader, but for existing customers using Hr2Hr, here are some sample scripts that show how to get more informative error messages. They can be run by creating data model sql queries in BI Publisher. The scripts currently have hard coded values for request id and loader batch id, which your developer will need to update to the correct values for you. The BI Publisher Training Session recorded on Apr 18th is available here (under "Recordings"). This will enable a somewhat technical resource to create a data model sql query. Links to Documentation & Traning Reference documentation for File Based Loader on docs.oracle.com FBL 1.1 MOS Doc Id 1533860.1 Sample demo data files for File Based Loader HCM SaaS Integrations ppt and recording. EBS api's Loading Information into EBS Full or Shared HCM This could be candidate information being loaded from Taleo into EBS or  Employee information being loaded from Fusion HCM into an EBS shared HR install (for downstream applications & EBS Financials). Oracle HRMS Product Family Publicly Callable Business Process APIs (A Reference Consolidation) [ID 216838.1] This is a guide to the EBS R12 Integration Repository accessible from an EBS instance. EBS HRMS Publicly Callable Business Process APIs in Release 11i & 12 [ID 121964.1] Fusion HCM Extract Fusion HCM Extract is the primary mechanism used to extract employee information from Fusion HCM. Refer to the "Configure Identity Sync" doc on MOS  for additional mechanisms. Additional documentation (you'll need an oracle.com account to access) HCM Extracts User Guides (Rel 4 & 5) HCM Extract Entity/Attributes (Rel 5) HCM Extract User Guide (Rel 5) If you don’t have an oracle.com account, download the zipped HCM Extract Rel 5 Docs (Click on File --> Download on next screen). View Training Recordings on Fusion HCM Extract Benefits Extract To setup the benefits extract, refer to the following guide. Page 2-15 of the User Documentation describes how to use the benefits extract. Benefit enrollments can also be uploaded into Fusion Benefits. Instructions are here along with a sample upload file. However, if the defined benefits extract does not meet your requirements, you can use BI Publisher (Link to BI Publisher presentation recording from Apr 18th) to create your own version of Benefits extract. You can start with the data model query underlying the benefits extract. Payroll Interface Fusion Payroll Interface enables you to capture personal payroll information, such as earnings and deductions, along with other data from Oracle Fusion Human Capital Management, and send that information to a third-party payroll provider. Documentation: Payroll interface guide Sample file DBI's used for the payroll interface.Usage Patterns always accessible @ http://www.finapps.com Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif"; mso-bidi-font-family:"Times New Roman";}

  Read the article

• Profit's COLLABORATE 10 Session Selections

  - by Aaron Lazenby

  COLLABORATE 2010 is a mere 11 days away (thanks for the reminder @ocp_advisor). Every year I publish my a list of the sessions I think reflect some of the more interesting people/trends in enterprise IT. I should be at all of these sessions, so drop by for a chat--I'll be the guy tapping out emails on my iPad... Monday, April 19 9:15 a.m. - Keynote: Transforming Customer Value, Delivering Highest Customer Service Location: Keynote Hall I never miss Charles Phillips when he speaks--it's one of the best opportunities to get an update on Oracle product developments and strategy. And there's certainly occasion for an update: this will be Phillips' first big presentation since the Oracle + Sun Strategy Update in late January. Phillips is appearing with Oracle Executive Vice President of Development Thomas Kurian which means there should be some excellent information about how customers are using Oracle's complete software and hardware stack to address enterprise IT challenges. The session should provide some excellent context for the rest of the week's session...don't miss it. 10:45 a.m. - Oracle Fusion Applications: Functional Overview Location: South Seas FI met Basheer Khan at COLLABORATE 08 in Denver and have followed his work ever since. He's a former member of the OAUG Board of Directors, an Oracle ACE, and a charismatic enterprise IT expert. Having worked with the Oracle Usability Advisory Board, Basheer should have some fascinating insights to share about the features and interface of Oracle's Fusine Applications. This session, along with Nadia Bendjedou's "10 Things You Can Do Today to Prepare for the Next Generation Applications" (on Tuesday, April 20 8:00 a.m. in room 3662) should give attendees the update they need about Oracle's next-generation applications.   1:15p.m. - E-Business Suite in the Amazon Cloud Location: South Seas HI did my first full-fledged cloud computing coverage at last year's COLLABORATE show (check out my interview with Oracle's Bill Hodak), where I first learned about Amazon's EC2 offering. I've since talked with several people who have provisioned server space on Amazon's cloud with great results. So I'm looking forward to watching the audience configure an instance of the Oracle E-Business Suite release 12 on the cloud while Chuck Edwards from Blue Gecko drives. This session should take some of the mist and vapor out of the cloud conversation.2:30 p.m. - "Zero Sign-on" to EBS - Enabling 96000 Users to Login to EBS Without User Maintenance Location: South Seas HI'll be sitting tight in South Seas H for the next session on Monday where Doug Pepka, a ten-year veteran of communications giant Comcast, will be walking attendees through a massive single sign-on (SSO) project across the enterprise. I'm working on a story about SSO for the August issue of Profit, so this session has real practical value to me. Plus the proliferation of user account logins--both personal and professional--makes this a critical usability/change management issue for IT leaders planning for successful long-term IT implementations.   Tuesday 8:00 am  - Information Architecture for Men in Kilts Location: SURF AGetting to a 8:00 a.m. presentation is a tall order in Las Vegas, but presenter Billy Cripe will make it worth your effort. Not only is the title of this session great, but the content should appeal to any IT strategist looking to push the limits of Web 2.0 technologies in the enterprise. Cripe is a product management director of Enterprise 2.0 and Enterprise Content Management at Oracle, author of Reshaping Your Business with Web 2.0, and a prolific blogger--he knows how information architecture is critical to and enterprise 2.0 implementation.    10:30a.m. - Oracle Virtualization: From Desktop to Data Center Location: REEF FData center virtualization is still one of the best ways to reduce the cost of running enterprise IT. With the addition of Sun products, Oracle has the industry's most comprehensive virtualization portfolio. I must admit, I'm no expert in this subject. So I'm looking forward to Monica Kumar's presentation so I can get up to speed.   Wednesday 8:00 a.m. - The Art of the Steal Location: Mandalay Bay Ballroom JMany will know Frank Abagnale from Steven Spielberg's 2002 film "Catch Me if You Can." The one-time con man and international fugitive who swindled $2.5 million in forged checks went on to help U.S. federal officials investigate fraud cases. Now the CEO of Abagnale and Associates, he has become an invaluable source to the business world on the subject of fraud and fraud protection. With identity theft and digital fraud still on the rise, this session should be an entertaining, and sobering, education on the threats facing businesses and customers around the world. A great way to start Wednesday.1:00 p.m. - Google Wave: Will it replace e-mail as we know it today? Location: SURF EBy many assessments (my own included), Google Wave is a bit of an open collaboration failure. It may seem like an odd reason for me to be excited about this session, but I'm looking forward to the chance to revisit the technology. Also, this is a great case study in connecting free, available Internet tools to existing enterprise computing environments--an issue that IT strategists must contend with as workers spreads out and choose their own productivity tools.  

  Read the article

• Calling All Agile Customers-Share Your Stories at the Upcoming PLM Summit

  - by Terri Hiskey

  Now that we've closed the door on another Oracle OpenWorld, planning is in full swing for the next PLM Summit, taking place February 4-6, 2013 in San Francisco, in conjunction with the Oracle Value Chain Summit. This event is a must-attend for all Agile PLM customers. We will be holding five tracks with over forty Agile PLM-focused sessions covering a range of topics and industries. If you'd like to be notified once registration is live for this event, be sure to sign up at www.oracle.com/goto/vcs. CALL FOR PRESENTATIONS: We are looking for some fresh, new customer stories to share with attendees. Read below for descriptions of the five tracks, and the suggested topics that we'd like to hear from customers. If you are interested in presenting at the PLM Summit (and getting a FREE pass to attend if your presentation is accepted!) send me an email at terri.hiskey-AT-oracle.com with: Your proposed session title and the track your session fits into 3-5 bullets of takeaways that attendees will get from your presentation Your complete contact information including name, title, company, telephone number and email The deadline for this call for presentations is Thursday, November 15, so get your submission in soon! PLM Track #1:  Product Insights and Best Practices This track will provide executive attendees and line of business managers with an overview of how Agile PLM has been deployed and used at customers to enable and manage critical product-related business processes including enterprise quality and supplier management, compliance, product cost management, portfolio management, commercialization and software lifecycle management. These sessions will also provide details around how to manage the development and rollout of the solutions and how to achieve and track value. Possible session topics: Software Lifecycle Management Enterprise Quality Management New Product Development Integrated Business Planning ECO effectivity planning Rapid Commercialization             Manage the Design to Release Process for Complex Configured Products PLM for Life Sciences Companies I (Compliant Data Set) PLM for Life Sciences Companies II (eMDR, UDI) Discrete CPG – Private Label Mgmt Cost Management and Strategic Sourcing IP Mgmt in the Semiconductor Industry Implementing the Enterprise Training Record using Agile PLM PLM Track #2: Product Deep Dives & Demos This track is aimed at line of business  and IT managers who would like to understand the benefits of expanding their PLM footprint. The sessions in this track will provide attendees with an up-close and in-depth look Agile PLM’s newer and exciting applications, including analytics and innovation management, and will detail features and functionality that are available in the latest version of Agile PLM Possible session topics: Oracle Product Lifecycle Analytics Integrating PLM with Engineering and Supply Chain Systems Streamline PLM Design to Manufacturing Processes with AutoVue Visualization Solutions         Achieve Environmental Compliance (REACH and ROHS) with Agile Product Governance & Compliance PIM Deep Dive Achieving Integrated Change Control with Agile PLM and E-Business Suite Deploying PLM at Small and Midsize Enterprises Enhancing Oracle PQM w/APQP and 8D functionality Advanced Roles and Privileges – Enabling ITAR Model Unit Effectivity Implementing REACH with 9.3.2 Deploying Job Functions, Functional Teams in 9.3.2 to Improve Your Approval Matrix PLM Track #3: Administration & Integrations This track will provide sessions for Agile administrators, managers and daily Agile PLM users who are preparing to upgrade or looking to extend the use of their current PLM implementation through AIA and process extensions. It will include deeper conversation about Agile PLM features and best practices on managing an Agile PLM infrastructure. Possible session topics: Expand the Value of your Agile Investment with Innovative Process Extension Ideas Ensuring Implementation & Upgrade Success Ensure the Integrity and Accuracy of Product Data Across the Enterprise              Maximize the Benefits of an Integrated Architecture with AIA Integrating your PLM Implementation with ERP               Infrastructure Optimization Expanding Your PLM Implementation PLM Administrator Open Forum Q&A/Discussion FDA Validation Best Practices Best Practices for Managing a large Agile Deployment: Clustering, Load Balancing and Firewalls PLM Track #4: Agile PLM for Process This track is aimed at attendees interested in or currently using Agile PLM for Process. The sessions in this track will go over new features and functionality available in the newest version of PLM for Process and will give attendees an overview on how PLM for Process is being used to manage critical business processes such as formulation, recipe and specification management Possible session topics: PLM for Process Strategy, Roadmap and Update New Product Development and Introduction Effective Product Supplier Collaboration             Leverage Agile Formulation and Compliance to Manage Cost, Compliance, Quality, Labeling and Nutrition Menu Management Innovation Data Management Food Safety/ Introduction of P4P Quality Mgmt PLM Track #5: Agile PLM and Innovation Management This track consists of five sessions, and is for attendees interested in learning more about Oracle’s Agile Innovation Management, an exciting new addition to the Agile PLM application family that redefines the industry’s scope of product lifecycle management. Oracle’s innovation solutions enable companies to collaborate in a focused way among various functional groups (marketing, sales, operations, engineering/R&D and sourcing), combining insights of customer needs/requirements, competition, available technologies, alternate design scenarios and portfolio constraints to deliver what customers truly value. The results are better products, higher margins, greater efficiencies, more satisfied customers and the increased ability to continuously innovate. Possible session topics: Product Innovation Management Solution Overview Product Requirements & Ideation Management Concept Design Management Product Lifecycle Portfolio Management Innovation as a Competitive Differentiator

  Read the article

• concurrency::accelerator

  - by Daniel Moth

  Overview An accelerator represents a "target" on which C++ AMP code can execute and where data can reside. Typically (but not necessarily) an accelerator is a GPU device. Accelerators are represented in C++ AMP as objects of the accelerator class. For many scenarios, you do not need to obtain an accelerator object, since the runtime has a notion of a default accelerator, which is what it thinks is the best one in the system. Examples where you need to deal with accelerator objects are if you need to pick your own accelerator (based on your specific criteria), or if you need to use more than one accelerators from your app. Construction and operator usage You can query and obtain a std::vector of all the accelerators on your system, which the runtime discovers on startup. Beyond enumerating accelerators, you can also create one directly by passing to the constructor a system-wide unique path to a device if you know it (i.e. the “Device Instance Path” property for the device in Device Manager), e.g. accelerator acc(L"PCI\\VEN_1002&DEV_6898&SUBSYS_0B001002etc"); There are some predefined strings (for predefined accelerators) that you can pass to the accelerator constructor (and there are corresponding constants for those on the accelerator class itself, so you don’t have to hardcode them every time). Examples are the following: accelerator::default_accelerator represents the default accelerator that the C++ AMP runtime picks for you if you don’t pick one (the heuristics of how it picks one will be covered in a future post). Example: accelerator acc; accelerator::direct3d_ref represents the reference rasterizer emulator that simulates a direct3d device on the CPU (in a very slow manner). This emulator is available on systems with Visual Studio installed and is useful for debugging. More on debugging in general in future posts. Example: accelerator acc(accelerator::direct3d_ref); accelerator::direct3d_warp represents a target that I will cover in future blog posts. Example: accelerator acc(accelerator::direct3d_warp); accelerator::cpu_accelerator represents the CPU. In this first release the only use of this accelerator is for using the staging arrays technique that I'll cover separately. Example: accelerator acc(accelerator::cpu_accelerator); You can also create an accelerator by shallow copying another accelerator instance (via the corresponding constructor) or simply assigning it to another accelerator instance (via the operator overloading of =). Speaking of operator overloading, you can also compare (for equality and inequality) two accelerator objects between them to determine if they refer to the same underlying device. Querying accelerator characteristics Given an accelerator object, you can access its description, version, device path, size of dedicated memory in KB, whether it is some kind of emulator, whether it has a display attached, whether it supports double precision, and whether it was created with the debugging layer enabled for extensive error reporting. Below is example code that accesses some of the properties; in your real code you'd probably be checking one or more of them in order to pick an accelerator (or check that the default one is good enough for your specific workload): void inspect_accelerator(concurrency::accelerator acc) { std::wcout << "New accelerator: " << acc.description << std::endl; std::wcout << "is_debug = " << acc.is_debug << std::endl; std::wcout << "is_emulated = " << acc.is_emulated << std::endl; std::wcout << "dedicated_memory = " << acc.dedicated_memory << std::endl; std::wcout << "device_path = " << acc.device_path << std::endl; std::wcout << "has_display = " << acc.has_display << std::endl; std::wcout << "version = " << (acc.version >> 16) << '.' << (acc.version & 0xFFFF) << std::endl; } accelerator_view In my next blog post I'll cover a related class: accelerator_view. Suffice to say here that each accelerator may have from 1..n related accelerator_view objects. You can get the accelerator_view from an accelerator via the default_view property, or create new ones by invoking the create_view method that creates an accelerator_view object for you (by also accepting a queuing_mode enum value of deferred or immediate that we'll also explore in the next blog post). Comments about this post by Daniel Moth welcome at the original blog.

  Read the article

• Aggregating cache data from OCEP in CQL

  - by Manju James

  There are several use cases where OCEP applications need to join stream data with external data, such as data available in a Coherence cache. OCEP’s streaming language, CQL, supports simple cache-key based joins of stream data with data in Coherence (more complex queries will be supported in a future release). However, there are instances where you may need to aggregate the data in Coherence based on input data from a stream. This blog describes a sample that does just that. For our sample, we will use a simplified credit card fraud detection use case. The input to this sample application is a stream of credit card transaction data. The input stream contains information like the credit card ID, transaction time and transaction amount. The purpose of this application is to detect suspicious transactions and send out a warning event. For the sake of simplicity, we will assume that all transactions with amounts greater than $1000 are suspicious. The transaction history is available in a Coherence distributed cache. For every suspicious transaction detected, a warning event must be sent with maximum amount, total amount and total number of transactions over the past 30 days, as shown in the diagram below. Application Input Stream input to the EPN contains events of type CCTransactionEvent. This input has to be joined with the cache with all credit card transactions. The cache is configured in the EPN as shown below: <wlevs:caching-system id="CohCacheSystem" provider="coherence"/> <wlevs:cache id="CCTransactionsCache" value-type="CCTransactionEvent" key-properties="cardID, transactionTime" caching-system="CohCacheSystem"> </wlevs:cache> Application Output The output that must be produced by the application is a fraud warning event. This event is configured in the spring file as shown below. Source for cardHistory property can be seen here. <wlevs:event-type type-name="FraudWarningEvent"> <wlevs:properties type="tuple"> <wlevs:property name="cardID" type="CHAR"/> <wlevs:property name="transactionTime" type="BIGINT"/> <wlevs:property name="transactionAmount" type="DOUBLE"/> <wlevs:property name="cardHistory" type="OBJECT"/> </wlevs:properties </wlevs:event-type> Cache Data Aggregation using Java Cartridge In the output warning event, cardHistory property contains data from the cache aggregated over the past 30 days. To get this information, we use a java cartridge method. This method uses Coherence’s query API on credit card transactions cache to get the required information. Therefore, the java cartridge method requires a reference to the cache. This may be set up by configuring it in the spring context file as shown below: <bean class="com.oracle.cep.ccfraud.CCTransactionsAggregator"> <property name="cache" ref="CCTransactionsCache"/> </bean> This is used by the java class to set a static property: public void setCache(Map cache) { s_cache = (NamedCache) cache; } The code snippet below shows how the total of all the transaction amounts in the past 30 days is computed. Rest of the information required by CardHistory object is calculated in a similar manner. Complete source of this class can be found here. To find out more information about using Coherence's API to query a cache, please refer Coherence Developer’s Guide. public static CreditHistoryData(String cardID) { … Filter filter = QueryHelper.createFilter("cardID = :cardID and transactionTime :transactionTime", map); CardHistoryData history = new CardHistoryData(); Double sum = (Double) s_cache.aggregate(filter, new DoubleSum("getTransactionAmount")); history.setTotalAmount(sum); … return history; } The java cartridge method is used from CQL as seen below: select cardID, transactionTime, transactionAmount, CCTransactionsAggregator.execute(cardID) as cardHistory from inputChannel where transactionAmount1000 This produces a warning event, with history data, for every credit card transaction over $1000. That is all there is to it. The complete source for the sample application, along with the configuration files, is available here. In the sample, I use a simple java bean to load the cache with initial transaction history data. An input adapter is used to create and send transaction events for the input stream.

  Read the article

• Center Pictures and Other Objects in Office 2007 & 2010

  - by Matthew Guay

  Sometimes it can be difficult to center a picture in a document just by dragging it dragging it around. Today we show you how to center pictures, images, and other objects perfectly in Word and PowerPoint. Note: For this tutorial we’re using Office 2010, but the steps are nearly identical in 2007. Centering a Picture in Word First let’s insert a picture into our document.  Click the Insert tab, and then click Picture. Once you select the picture you want, it will be added to your document.  Usually, pictures are added wherever your curser was in the document, so in a blank document it will be added at the top left. Also notice Picture Tools show up in the Ribbon after inserting an image. Note: The following menu items are available in Picture Tools Format tab which is displayed when you select the object or image you’re working with. How do we align the picture just like we want?  Click Position to get some quick placement options, including centered in the middle of the document or on the top.    However, for more advanced placement, we can use the Align tool.  If Word isn’t maximized, you may only see the icon without the “Align” label. Notice the tools were grayed out in the menu by default.  To be able to change the Alignment, we need to first change the text wrap settings. Click the Wrap Text button, and any option other than “In Line with Text”.  Your choice will depend on the document you’re writing, just choose the option that works best in the document.   Now, select the Align tools again.  You can now position your image precisely with these options. Align Center will position your picture in the center of the page widthwise. Align Middle will put the picture in the middle of the page height-wise. This works the same with textboxes.  Simply click the Align button in the Format tab, and you can center it in the page. And if you’d like to align several objects together, simply select them all, click Group, and then select Group from the menu.   Now, in the align tools, you can center the whole group on your page for a heading, or whatever you want to use the pictures for. These steps also work the same with Office 2007. Center objects in PowerPoint This works similar in PowerPoint, except that pictures are automatically set for square wrapping automatically, so you don’t have to change anything.  Simply insert the picture or other object of your choice, click Align, and choose the option you want. Additionally, if one object is already aligned like you want, drag another object near it and you will see a Smart Guide to help you align or center the second object with the first.  This only works with shapes in PowerPoint 2010 beta, but will work with pictures, textboxes, and media in the final release this summer. Conclusion These are good methods for centering images and objects in Word and PowerPoint.  From designing perfect headers to emphasizing your message in a PowerPoint presentation, this is something we’ve found useful and hope you will too. Since we’re talking about Office here, it’s worth mentioning that Microsoft has announced the Technology Guarantee Program for Office 2010. Essentially what this means is, if you purchase a version of Office 2007 between March 5th and September 30th of this year, when Office 2010 is released you’ll be able to upgrade to it for free! Similar Articles Productive Geek Tips Add or Remove Apps from the Microsoft Office 2007 or 2010 SuiteAdd More Functions To Office 2007 By Installing Add-InsCustomize Your Welcome Picture Choices in Windows VistaEasily Rotate Pictures In Word 2007Add Effects To Your Pictures in Word 2007 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Discover New Bundled Feeds in Google Reader Play Music in Chrome by Simply Dragging a File 15 Great Illustrations by Chow Hon Lam Easily Sync Files & Folders with Friends & Family Amazon Free Kindle for PC Download Stretch popurls.com with a Stylish Script (Firefox)

  Read the article

• SQL SERVER – Weekly Series – Memory Lane – #039

  - by Pinal Dave

  Here is the list of selected articles of SQLAuthority.com across all these years. Instead of just listing all the articles I have selected a few of my most favorite articles and have listed them here with additional notes below it. Let me know which one of the following is your favorite article from memory lane. 2007 FQL – Facebook Query Language Facebook list following advantages of FQL: Condensed XML reduces bandwidth and parsing costs. More complex requests can reduce the number of requests necessary. Provides a single consistent, unified interface for all of your data. It’s fun! UDF – Get the Day of the Week Function The day of the week can be retrieved in SQL Server by using the DatePart function. The value returned by the function is between 1 (Sunday) and 7 (Saturday). To convert this to a string representing the day of the week, use a CASE statement. UDF – Function to Get Previous And Next Work Day – Exclude Saturday and Sunday While reading ColdFusion blog of Ben Nadel Getting the Previous Day In ColdFusion, Excluding Saturday And Sunday, I realize that I use similar function on my SQL Server Database. This function excludes the Weekends (Saturday and Sunday), and it gets previous as well as next work day. Complete Series of SQL Server Interview Questions and Answers Data Warehousing Interview Questions and Answers – Introduction Data Warehousing Interview Questions and Answers – Part 1 Data Warehousing Interview Questions and Answers – Part 2 Data Warehousing Interview Questions and Answers – Part 3 Data Warehousing Interview Questions and Answers Complete List Download 2008 Introduction to Log Viewer In SQL Server all the windows event logs can be seen along with SQL Server logs. Interface for all the logs is same and can be launched from the same place. This log can be exported and filtered as well. DBCC SHRINKFILE Takes Long Time to Run If you are DBA who are involved with Database Maintenance and file group maintenance, you must have experience that many times DBCC SHRINKFILE operations takes a long time but any other operations with Database are relatively quicker. mssqlsystemresource – Resource Database The purpose of resource database is to facilitates upgrading to the new version of SQL Server without any hassle. In previous versions whenever version of SQL Server was upgraded all the previous version system objects needs to be dropped and new version system objects to be created. 2009 Puzzle – Write Script to Generate Primary Key and Foreign Key In SQL Server Management Studio (SSMS), there is no option to script all the keys. If one is required to script keys they will have to manually script each key one at a time. If database has many tables, generating one key at a time can be a very intricate task. I want to throw a question to all of you if any of you have scripts for the same purpose. Maximizing View of SQL Server Management Studio – Full Screen – New Screen I had explained the following two different methods: 1) Open Results in Separate Tab - This is a very interesting method as result pan shows up in a different tab instead of the splitting screen horizontally. 2) Open SSMS in Full Screen - This works always and to its best. Not many people are aware of this method; hence, very few people use it to enhance performance. 2010 Find Queries using Parallelism from Cached Plan T-SQL script gets all the queries and their execution plan where parallelism operations are kicked up. Pay attention there is TOP 10 is used, if you have lots of transactional operations, I suggest that you change TOP 10 to TOP 50 This is the list of the all the articles in the series of computed columns. SQL SERVER – Computed Column – PERSISTED and Storage This article talks about how computed columns are created and why they take more storage space than before. SQL SERVER – Computed Column – PERSISTED and Performance This article talks about how PERSISTED columns give better performance than non-persisted columns. SQL SERVER – Computed Column – PERSISTED and Performance – Part 2 This article talks about how non-persisted columns give better performance than PERSISTED columns. SQL SERVER – Computed Column and Performance – Part 3 This article talks about how Index improves the performance of Computed Columns. SQL SERVER – Computed Column – PERSISTED and Storage – Part 2 This article talks about how creating index on computed column does not grow the row length of table. SQL SERVER – Computed Columns – Index and Performance This article summarized all the articles related to computed columns. 2011 SQL SERVER – Interview Questions and Answers – Frequently Asked Questions – Data Warehousing Concepts – Day 21 of 31 What is Data Warehousing? What is Business Intelligence (BI)? What is a Dimension Table? What is Dimensional Modeling? What is a Fact Table? What are the Fundamental Stages of Data Warehousing? What are the Different Methods of Loading Dimension tables? Describes the Foreign Key Columns in Fact Table and Dimension Table? What is Data Mining? What is the Difference between a View and a Materialized View? SQL SERVER – Interview Questions and Answers – Frequently Asked Questions – Data Warehousing Concepts – Day 22 of 31 What is OLTP? What is OLAP? What is the Difference between OLTP and OLAP? What is ODS? What is ER Diagram? SQL SERVER – Interview Questions and Answers – Frequently Asked Questions – Data Warehousing Concepts – Day 23 of 31 What is ETL? What is VLDB? Is OLTP Database is Design Optimal for Data Warehouse? If denormalizing improves Data Warehouse Processes, then why is the Fact Table is in the Normal Form? What are Lookup Tables? What are Aggregate Tables? What is Real-Time Data-Warehousing? What are Conformed Dimensions? What is a Conformed Fact? How do you Load the Time Dimension? What is a Level of Granularity of a Fact Table? What are Non-Additive Facts? What is a Factless Facts Table? What are Slowly Changing Dimensions (SCD)? SQL SERVER – Interview Questions and Answers – Frequently Asked Questions – Data Warehousing Concepts – Day 24 of 31 What is Hybrid Slowly Changing Dimension? What is BUS Schema? What is a Star Schema? What Snow Flake Schema? Differences between the Star and Snowflake Schema? What is Difference between ER Modeling and Dimensional Modeling? What is Degenerate Dimension Table? Why is Data Modeling Important? What is a Surrogate Key? What is Junk Dimension? What is a Data Mart? What is the Difference between OLAP and Data Warehouse? What is a Cube and Linked Cube with Reference to Data Warehouse? What is Snapshot with Reference to Data Warehouse? What is Active Data Warehousing? What is the Difference between Data Warehousing and Business Intelligence? What is MDS? Explain the Paradigm of Bill Inmon and Ralph Kimball. SQL SERVER – Azure Interview Questions and Answers – Guest Post by Paras Doshi – Day 25 of 31 Paras Doshi has submitted 21 interesting question and answers for SQL Azure. 1.What is SQL Azure? 2.What is cloud computing? 3.How is SQL Azure different than SQL server? 4.How many replicas are maintained for each SQL Azure database? 5.How can we migrate from SQL server to SQL Azure? 6.Which tools are available to manage SQL Azure databases and servers? 7.Tell me something about security and SQL Azure. 8.What is SQL Azure Firewall? 9.What is the difference between web edition and business edition? 10.How do we synchronize On Premise SQL server with SQL Azure? 11.How do we Backup SQL Azure Data? 12.What is the current pricing model of SQL Azure? 13.What is the current limitation of the size of SQL Azure DB? 14.How do you handle datasets larger than 50 GB? 15.What happens when the SQL Azure database reaches Max Size? 16.How many databases can we create in a single server? 17.How many servers can we create in a single subscription? 18.How do you improve the performance of a SQL Azure Database? 19.What is code near application topology? 20.What were the latest updates to SQL Azure service? 21.When does a workload on SQL Azure get throttled? SQL SERVER – Interview Questions and Answers – Guest Post by Malathi Mahadevan – Day 26 of 31 Malachi had asked a simple question which has several answers. Each answer makes you think and ponder about the reality of the IT world. Look at the simple question – ‘What is the toughest challenge you have faced in your present job and how did you handle it’? and its various answers. Each answer has its own story. SQL SERVER – Interview Questions and Answers – Guest Post by Rick Morelan – Day 27 of 31 Rick Morelan of Joes2Pros has written an excellent blog post on the subject how to find top N values. Most people are fully aware of how the TOP keyword works with a SELECT statement. After years preparing so many students to pass the SQL Certification I noticed they were pretty well prepared for job interviews too. Yes, they would do well in the interview but not great. There seemed to be a few questions that would come up repeatedly for almost everyone. Rick addresses similar questions in his lucid writing skills. 2012 Observation of Top with Index and Order of Resultset SQL Server has lots of things to learn and share. It is amazing to see how people evaluate and understand different techniques and styles differently when implementing. The real reason may be absolutely different but we may blame something totally different for the incorrect results. Read the blog post to learn more. How do I Record Video and Webcast How to Convert Hex to Decimal or INT Earlier I asked regarding a question about how to convert Hex to Decimal. I promised that I will post an answer with Due Credit to the author but never got around to post a blog post around it. Read the original post over here SQL SERVER – Question – How to Convert Hex to Decimal. Query to Get Unique Distinct Data Based on Condition – Eliminate Duplicate Data from Resultset The natural reaction will be to suggest DISTINCT or GROUP BY. However, not all the questions can be solved by DISTINCT or GROUP BY. Let us see the following example, where a user wanted only latest records to be displayed. Let us see the example to understand further. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Memory Lane, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• Goodbye XML&hellip; Hello YAML (part 2)

  - by Brian Genisio's House Of Bilz

  Part 1 After I explained my motivation for using YAML instead of XML for my data, I got a lot of people asking me what type of tooling is available in the .Net space for consuming YAML.  In this post, I will discuss a nice tooling option as well as describe some small modifications to leverage the extremely powerful dynamic capabilities of C# 4.0.  I will be referring to the following YAML file throughout this post Recipe: Title: Macaroni and Cheese Description: My favorite comfort food. Author: Brian Genisio TimeToPrepare: 30 Minutes Ingredients: - Name: Cheese Quantity: 3 Units: cups - Name: Macaroni Quantity: 16 Units: oz Steps: - Number: 1 Description: Cook the macaroni - Number: 2 Description: Melt the cheese - Number: 3 Description: Mix the cooked macaroni with the melted cheese Tooling It turns out that there are several implementations of YAML tools out there.  The neatest one, in my opinion, is YAML for .NET, Visual Studio and Powershell.  It includes a great editor plug-in for Visual Studio as well as YamlCore, which is a parsing engine for .Net.  It is in active development still, but it is certainly enough to get you going with YAML in .Net.  Start by referenceing YamlCore.dll, load your document, and you are on your way.  Here is an example of using the parser to get the title of the Recipe: var yaml = YamlLanguage.FileTo("Data.yaml") as Hashtable; var recipe = yaml["Recipe"] as Hashtable; var title = recipe["Title"] as string; In a similar way, you can access data in the Ingredients set: var yaml = YamlLanguage.FileTo("Data.yaml") as Hashtable; var recipe = yaml["Recipe"] as Hashtable; var ingredients = recipe["Ingredients"] as ArrayList; foreach (Hashtable ingredient in ingredients) { var name = ingredient["Name"] as string; } You may have noticed that YamlCore uses non-generic Hashtables and ArrayLists.  This is because YamlCore was designed to work in all .Net versions, including 1.0.  Everything in the parsed tree is one of two things: Hashtable, ArrayList or Value type (usually String).  This translates well to the YAML structure where everything is either a Map, a Set or a Value.  Taking it further Personally, I really dislike writing code like this.  Years ago, I promised myself to never write the words Hashtable or ArrayList in my .Net code again.  They are ugly, mostly depreciated collections that existed before we got generics in C# 2.0.  Now, especially that we have dynamic capabilities in C# 4.0, we can do a lot better than this.  With a relatively small amount of code, you can wrap the Hashtables and Array lists with a dynamic wrapper (wrapper code at the bottom of this post).  The same code can be re-written to look like this: dynamic doc = YamlDoc.Load("Data.yaml"); var title = doc.Recipe.Title; And dynamic doc = YamlDoc.Load("Data.yaml"); foreach (dynamic ingredient in doc.Recipe.Ingredients) { var name = ingredient.Name; } I significantly prefer this code over the previous.  That’s not all… the magic really happens when we take this concept into WPF.  With a single line of code, you can bind to the data dynamically in the view: DataContext = YamlDoc.Load("Data.yaml"); Then, your XAML is extremely straight-forward (Nothing else.  No static types, no adapter code.  Nothing): <StackPanel> <TextBlock Text="{Binding Recipe.Title}" /> <TextBlock Text="{Binding Recipe.Description}" /> <TextBlock Text="{Binding Recipe.Author}" /> <TextBlock Text="{Binding Recipe.TimeToPrepare}" /> <TextBlock Text="Ingredients:" FontWeight="Bold" /> <ItemsControl ItemsSource="{Binding Recipe.Ingredients}" Margin="10,0,0,0"> <ItemsControl.ItemTemplate> <DataTemplate> <StackPanel Orientation="Horizontal"> <TextBlock Text="{Binding Quantity}" /> <TextBlock Text=" " /> <TextBlock Text="{Binding Units}" /> <TextBlock Text=" of " /> <TextBlock Text="{Binding Name}" /> </StackPanel> </DataTemplate> </ItemsControl.ItemTemplate> </ItemsControl> <TextBlock Text="Steps:" FontWeight="Bold" /> <ItemsControl ItemsSource="{Binding Recipe.Steps}" Margin="10,0,0,0"> <ItemsControl.ItemTemplate> <DataTemplate> <StackPanel Orientation="Horizontal"> <TextBlock Text="{Binding Number}" /> <TextBlock Text=": " /> <TextBlock Text="{Binding Description}" /> </StackPanel> </DataTemplate> </ItemsControl.ItemTemplate> </ItemsControl> </StackPanel> This nifty XAML binding trick only works in WPF, unfortunately.  Silverlight handles binding differently, so they don’t support binding to dynamic objects as of late (March 2010).  This, in my opinion, is a major lacking feature in Silverlight and I really hope we will see this feature available to us in Silverlight 4 Release.  (I am not very optimistic for Silverlight 4, but I can hope for the feature in Silverlight 5, can’t I?) Conclusion I still have a few things I want to say about using YAML in the .Net space including de-serialization and using IronRuby for your YAML parser, but this post is hopefully enough to see how easy it is to incorporate YAML documents in your code. Codeplex Site for YAML tools Dynamic wrapper for YamlCore

  Read the article

• Sea Monkey Sales & Marketing, and what does that have to do with ERP?

  - by user709270

  Tier One Defined By Lyle Ekdahl, Oracle JD Edwards Group Vice President and General Manager  I recently became aware of the latest Sea Monkey Sales & Marketing tactic. Wait now, what is Sea Monkey Sales & Marketing and what does that have to do with ERP? Well if you grew up in USA during the 50’s, 60’s and maybe a bit in the early 70’s there was a unifying media of culture known as the comic book. I was a big Iron Man fan. I always liked the troubled hero aspect of Tony Start and hey he was a technologist. This is going somewhere, just hold on. Of course comic books like most media contained advertisements. Ninety pound weakling transformed by Charles Atlas in just 15 minutes per day. Baby Ruth, Juicy Fruit Gum and all assortments of Hostess goodies were on display. The best ad was for the “Amazing Live Sea-Monkeys – The real live fun-pets you grow yourself!” These ads set the standard for exaggeration and half-truth; “…they love attention…so eager to please, they can even be trained…” The cartoon picture on the ad is of a family of royal looking sea creatures – daddy, mommy, son and little sis – sea monkey? There was a disclaimer at the bottom in fine print, “Caricatures shown not intended to depict Artemia.” Ok what ten years old knows what the heck artemia is? Well you grow up fast once you’ve been separated from your buck twenty five plus postage just to discover that it is brine shrimp. Really dumb brine shrimp that don’t take commands or do tricks. Unfortunately the technology industry is full of sea monkey sales and marketing. Yes believe it or not in some cases there is subterfuge and obfuscation used to secure contracts. Hey I get it; the picture on the box might not be the actual size. Make up what you want about your product, but here is what I don’t like, could you leave out the obvious falsity when it comes to my product, especially the negative stuff. So here is the latest one – “Oracle’s JD Edwards is NOT tier one”. Really? Definition please! Well a whole host of googleable and reputable sources confirm that a tier one vendor is large, well known, and enjoys national and international recognition. Let me see large, so thousands of customers? Oh and part of the world’s largest business software and hardware corporation? Check and check JD Edwards has that and that. Well known, enjoying national and international recognition? Oracle’s JD Edwards EnterpriseOne is available in 21 languages and is directly localized in 33 countries that support some of the world’s largest multinationals and many midsized domestic market companies. Something on the order of half the JD Edwards customer base is outside North America. My passport is on its third insert after 2 years and not from vacations. So if you don’t mind I am going to mark national and international recognition in the got it column. So what else is there? Well let me offer a few criteria. Longevity – The JD Edwards products benefit from 35+ years of intellectual property development; through booms, busts, mergers and acquisitions, we are still here Vision & innovation – JD Edwards is the first full suite ERP to run on the iPad as just one example Proven track record of execution – Since becoming part of Oracle, JD Edwards has released to the market over 20 deliverables including major release, point releases, new apps modules, tool releases, integrations…. Solid, focused functionality with a flexible, interoperable, extensible underlying architecture – JD Edwards offers solid core ERP with specialty modules for verticals all delivered on a well defined independent tools layer that helps enable you to scale your business without an ERP reimplementation A continuation plan – Oracle’s JD Edwards offers our customers a 6 year roadmap as well as interoperability with Oracle’s next generation of applications Oh I almost forgot that the expert sources agree on one additional thing, tier one may be a preferred vendor that offers product and services to you with appealing value. You should check out the TCO studies of JD Edwards. I think you will see what the thousands of customers that rely on these products to run their businesses enjoy – that is the tier one solution with the lowest TCO. Oh and if you get an offer to buy an ERP for no license charge, remember the picture on the box might not be the actual size. 

  Read the article

• GlassFish Clustering with DCOM on Windows

  - by ByronNevins

  DCOM - Distributed COM, a Microsoft protocol for communicating with Windows machines. Why use DCOM? In GlassFish 3.1 SSH is used as the standard way to run commands on remote nodes for clustering.  It is very difficult for users to get SSH configured properly on Windows.  SSH does not come with Windows so we have to depend on third party tools.  And then the user is forced to install and configure these tools -- which can be tricky. DCOM is available on all supported platforms.  It is built-in to Windows. The idea is to use DCOM to communicate with remote Windows nodes.  This has the huge advantage that the user has to do minimal, if any, configuration on the Windows nodes. Implementation HighlightsTwo open Source Libraries have been added to GlassFish: Jcifs – a SAMBA implementation in Java J-interop – A Java implementation for making DCOM calls to remote Windows computers.   Note that any supported platform can use DCOM to work with Windows nodes -- not just Windows.E.g. you can have a Linux DAS work with Windows remote instances.All existing SSH commands now have a corresponding DCOM command – except for setup-ssh which isn’t needed for DCOM.  validate-dcom is an all new command. New DCOM Commands create-node-dcom delete-node-dcom install-node-dcom list-nodes-dcom ping-node-dcom uninstall-node-dcom update-node-dcom validate-dcom setup-local-dcom (This is only available via Update Center for GlassFish 3.1.2) These commands are in-place in the trunk (4.0).  And in the branch (3.1.2) Windows Configuration Challenges There are an infinite number of possible configurations of Windows if you look at it as a combination of main release, service-pack, special drivers, software, configuration etc.  Later versions of Windows err on the side of tightening security be default.  This means that the Windows host may need to have configuration changes made.These configuration changes mostly need to be made by the user.  setup-local-dcom will assist you in making required changes to the Windows Registry.  See the reference blogs for details. The validate-dcom Command validate-dcom is a crucial command.  It should be run before any other commands.  If it does not run successfully then there is no point in running other commands.The validate-dcom command must be used from a DAS machine to test a different Windows machine.  If  validate-dcom runs successfully you can be confident that all the DCOM commands will work.  Conversely, the opposite is also true:  If validate-dcom fails, then no DCOM commands will work. What validate-dcom does Verify that the remote host is not the local machine. Resolves the remote host name Checks that the remote DCOM port is being listened on (135, 139) Checks that the remote host’s File Sharing is enabled (port 445) It copies a file (a script) to the remote host to verify that SAMBA is working and authorization is correct It runs a script that it copied on-the-fly to the remote host. Tips and Tricks The bread and butter commands that use DCOM are existing commands like create-instance, start-instance etc.   All of the commands that have dcom in their name are for dealing with the actual nodes. The way the software works is to call asadmin.bat on the remote machine and run a command.  This means that you can track these commands easily on the remote machine with the usual tools.  E.g. using AS_LOGFILE, looking at log files, etc.  It’s easy to attach a debugger to the remote asadmin process, “just in time”, if necessary. How to debug the remote commands:Edit the asadmin.bat file that is in the glassfish/bin folder.  Use glassfish/lib/nadmin.bat in GlassFish 4.0+Add these options to the java call:-Xdebug -Xrunjdwp:transport=dt_socket,server=y,suspend=y,address=1234  Now if you run, say start-instance on DAS, you can attach your debugger, at your leisure, to the remote machines port 1234.  It will be running start-local-instance and patiently waiting for you to attach.

  Read the article

• Unable to cast transparent proxy to type &lt;type&gt;

  - by Rick Strahl

  This is not the first time I've run into this wonderful error while creating new AppDomains in .NET and then trying to load types and access them across App Domains. In almost all cases the problem I've run into with this error the problem comes from the two AppDomains involved loading different copies of the same type. Unless the types match exactly and come exactly from the same assembly the typecast will fail. The most common scenario is that the types are loaded from different assemblies - as unlikely as that sounds. An Example of Failure To give some context, I'm working on some old code in Html Help Builder that creates a new AppDomain in order to parse assembly information for documentation purposes. I create a new AppDomain in order to load up an assembly process it and then immediately unload it along with the AppDomain. The AppDomain allows for unloading that otherwise wouldn't be possible as well as isolating my code from the assembly that's being loaded. The process to accomplish this is fairly established and I use it for lots of applications that use add-in like functionality - basically anywhere where code needs to be isolated and have the ability to be unloaded. My pattern for this is: Create a new AppDomain Load a Factory Class into the AppDomain Use the Factory Class to load additional types from the remote domain Here's the relevant code from my TypeParserFactory that creates a domain and then loads a specific type - TypeParser - that is accessed cross-AppDomain in the parent domain:public class TypeParserFactory : System.MarshalByRefObject,IDisposable { …/// <summary> /// TypeParser Factory method that loads the TypeParser /// object into a new AppDomain so it can be unloaded. /// Creates AppDomain and creates type. /// </summary> /// <returns></returns> public TypeParser CreateTypeParser() { if (!CreateAppDomain(null)) return null; /// Create the instance inside of the new AppDomain /// Note: remote domain uses local EXE's AppBasePath!!! TypeParser parser = null; try { Assembly assembly = Assembly.GetExecutingAssembly(); string assemblyPath = Assembly.GetExecutingAssembly().Location; parser = (TypeParser) this.LocalAppDomain.CreateInstanceFrom(assemblyPath, typeof(TypeParser).FullName).Unwrap(); } catch (Exception ex) { this.ErrorMessage = ex.GetBaseException().Message; return null; } return parser; } private bool CreateAppDomain(string lcAppDomain) { if (lcAppDomain == null) lcAppDomain = "wwReflection" + Guid.NewGuid().ToString().GetHashCode().ToString("x"); AppDomainSetup setup = new AppDomainSetup(); // *** Point at current directory setup.ApplicationBase = AppDomain.CurrentDomain.BaseDirectory; //setup.PrivateBinPath = Path.Combine(AppDomain.CurrentDomain.BaseDirectory, "bin"); this.LocalAppDomain = AppDomain.CreateDomain(lcAppDomain,null,setup); // Need a custom resolver so we can load assembly from non current path AppDomain.CurrentDomain.AssemblyResolve += new ResolveEventHandler(CurrentDomain_AssemblyResolve); return true; } …} Note that the classes must be either [Serializable] (by value) or inherit from MarshalByRefObject in order to be accessible remotely. Here I need to call methods on the remote object so all classes are MarshalByRefObject. The specific problem code is the loading up a new type which points at an assembly that visible both in the current domain and the remote domain and then instantiates a type from it. This is the code in question:Assembly assembly = Assembly.GetExecutingAssembly(); string assemblyPath = Assembly.GetExecutingAssembly().Location; parser = (TypeParser) this.LocalAppDomain.CreateInstanceFrom(assemblyPath, typeof(TypeParser).FullName).Unwrap(); The last line of code is what blows up with the Unable to cast transparent proxy to type <type> error. Without the cast the code actually returns a TransparentProxy instance, but the cast is what blows up. In other words I AM in fact getting a TypeParser instance back but it can't be cast to the TypeParser type that is loaded in the current AppDomain. Finding the Problem To see what's going on I tried using the .NET 4.0 dynamic type on the result and lo and behold it worked with dynamic - the value returned is actually a TypeParser instance: Assembly assembly = Assembly.GetExecutingAssembly(); string assemblyPath = Assembly.GetExecutingAssembly().Location; object objparser = this.LocalAppDomain.CreateInstanceFrom(assemblyPath, typeof(TypeParser).FullName).Unwrap(); // dynamic works dynamic dynParser = objparser; string info = dynParser.GetVersionInfo(); // method call works // casting fails parser = (TypeParser)objparser; So clearly a TypeParser type is coming back, but nevertheless it's not the right one. Hmmm… mysterious.Another couple of tries reveal the problem however:// works dynamic dynParser = objparser; string info = dynParser.GetVersionInfo(); // method call works // c:\wwapps\wwhelp\wwReflection20.dll (Current Execution Folder) string info3 = typeof(TypeParser).Assembly.CodeBase; // c:\program files\vfp9\wwReflection20.dll (my COM client EXE's folder) string info4 = dynParser.GetType().Assembly.CodeBase; // fails parser = (TypeParser)objparser; As you can see the second value is coming from a totally different assembly. Note that this is even though I EXPLICITLY SPECIFIED an assembly path to load the assembly from! Instead .NET decided to load the assembly from the original ApplicationBase folder. Ouch! How I actually tracked this down was a little more tedious: I added a method like this to both the factory and the instance types and then compared notes:public string GetVersionInfo() { return ".NET Version: " + Environment.Version.ToString() + "\r\n" + "wwReflection Assembly: " + typeof(TypeParserFactory).Assembly.CodeBase.Replace("file:///", "").Replace("/", "\\") + "\r\n" + "Assembly Cur Dir: " + Directory.GetCurrentDirectory() + "\r\n" + "ApplicationBase: " + AppDomain.CurrentDomain.SetupInformation.ApplicationBase + "\r\n" + "App Domain: " + AppDomain.CurrentDomain.FriendlyName + "\r\n"; } For the factory I got: .NET Version: 4.0.30319.239wwReflection Assembly: c:\wwapps\wwhelp\bin\wwreflection20.dllAssembly Cur Dir: c:\wwapps\wwhelpApplicationBase: C:\Programs\vfp9\App Domain: wwReflection534cfa1f For the instance type I got: .NET Version: 4.0.30319.239wwReflection Assembly: C:\\Programs\\vfp9\wwreflection20.dllAssembly Cur Dir: c:\\wwapps\\wwhelpApplicationBase: C:\\Programs\\vfp9\App Domain: wwDotNetBridge_56006605 which clearly shows the problem. You can see that both are loading from different appDomains but the each is loading the assembly from a different location. Probably a better solution yet (for ANY kind of assembly loading problem) is to use the .NET Fusion Log Viewer to trace assembly loads.The Fusion viewer will show a load trace for each assembly loaded and where it's looking to find it. Here's what the viewer looks like: The last trace above that I found for the second wwReflection20 load (the one that is wonky) looks like this:*** Assembly Binder Log Entry (1/13/2012 @ 3:06:49 AM) *** The operation was successful. Bind result: hr = 0x0. The operation completed successfully. Assembly manager loaded from: C:\Windows\Microsoft.NET\Framework\V4.0.30319\clr.dll Running under executable c:\programs\vfp9\vfp9.exe --- A detailed error log follows. === Pre-bind state information === LOG: User = Ras\ricks LOG: DisplayName = wwReflection20, Version=4.61.0.0, Culture=neutral, PublicKeyToken=null (Fully-specified) LOG: Appbase = file:///C:/Programs/vfp9/ LOG: Initial PrivatePath = NULL LOG: Dynamic Base = NULL LOG: Cache Base = NULL LOG: AppName = vfp9.exe Calling assembly : (Unknown). === LOG: This bind starts in default load context. LOG: Using application configuration file: C:\Programs\vfp9\vfp9.exe.Config LOG: Using host configuration file: LOG: Using machine configuration file from C:\Windows\Microsoft.NET\Framework\V4.0.30319\config\machine.config. LOG: Policy not being applied to reference at this time (private, custom, partial, or location-based assembly bind). LOG: Attempting download of new URL file:///C:/Programs/vfp9/wwReflection20.DLL. LOG: Assembly download was successful. Attempting setup of file: C:\Programs\vfp9\wwReflection20.dll LOG: Entering run-from-source setup phase. LOG: Assembly Name is: wwReflection20, Version=4.61.0.0, Culture=neutral, PublicKeyToken=null LOG: Binding succeeds. Returns assembly from C:\Programs\vfp9\wwReflection20.dll. LOG: Assembly is loaded in default load context. WRN: The same assembly was loaded into multiple contexts of an application domain: WRN: Context: Default | Domain ID: 2 | Assembly Name: wwReflection20, Version=4.61.0.0, Culture=neutral, PublicKeyToken=null WRN: Context: LoadFrom | Domain ID: 2 | Assembly Name: wwReflection20, Version=4.61.0.0, Culture=neutral, PublicKeyToken=null WRN: This might lead to runtime failures. WRN: It is recommended to inspect your application on whether this is intentional or not. WRN: See whitepaper http://go.microsoft.com/fwlink/?LinkId=109270 for more information and common solutions to this issue. Notice that the fusion log clearly shows that the .NET loader makes no attempt to even load the assembly from the path I explicitly specified. Remember your Assembly Locations As mentioned earlier all failures I've seen like this ultimately resulted from different versions of the same type being available in the two AppDomains. At first sight that seems ridiculous - how could the types be different and why would you have multiple assemblies - but there are actually a number of scenarios where it's quite possible to have multiple copies of the same assembly floating around in multiple places. If you're hosting different environments (like hosting the Razor Engine, or ASP.NET Runtime for example) it's common to create a private BIN folder and it's important to make sure that there's no overlap of assemblies. In my case of Html Help Builder the problem started because I'm using COM interop to access the .NET assembly and the above code. COM Interop has very specific requirements on where assemblies can be found and because I was mucking around with the loader code today, I ended up moving assemblies around to a new location for explicit loading. The explicit load works in the main AppDomain, but failed in the remote domain as I showed. The solution here was simple enough: Delete the extraneous assembly which was left around by accident. Not a common problem, but one that when it bites is pretty nasty to figure out because it seems so unlikely that types wouldn't match. I know I've run into this a few times and writing this down hopefully will make me remember in the future rather than poking around again for an hour trying to debug the issue as I did today. Hopefully it'll save some of you some time as well in the future.© Rick Strahl, West Wind Technologies, 2005-2012Posted in .NET  COM   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

  Read the article

• Blazing fast performance with RadGridView for WPF 4.0 and Entity Framework 4.0

  Just before our upcoming release of Q1 2010 SP1 (early next week), Ive decided to check how RadGridView for WPF will handle complex Entity Framework 4.0 query with almost 2 million records: public class MyDataContext{    IQueryable _Data;    public IQueryable Data    {        get        {            if (_Data == null)            {                var northwindEntities = new NorthwindEntities();                var queryable = from o in northwindEntities.Orders                               from od in northwindEntities.Order_Details                                select new                                {                                    od.OrderID,                                    od.ProductID,                                    od.UnitPrice,                                    od.Quantity,                                    od.Discount,                                    o.CustomerID,                                    o.EmployeeID,                                    o.OrderDate                                };                _Data = queryable.OrderBy(i => i.OrderID);            }             return _Data;        }    }} The grid is bound completely codeless in XAML using RadDataPager with PageSize set to 50: <Window x:Class="WpfApplication1.MainWindow" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:telerik="http://schemas.telerik.com/2008/xaml/presentation" Title="MainWindow" mc...Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• ASSIMP in my program is much slower to import than ASSIMP view program

  - by Marco

  The problem is really simple: if I try to load with the function aiImportFileExWithProperties a big model in my software (around 200.000 vertices), it takes more than one minute. If I try to load the very same model with ASSIMP view, it takes 2 seconds. For this comparison, both my software and Assimp view are using the dll version of the library at 64 bit, compiled by myself (Assimp64.dll). This is the relevant piece of code in my software // default pp steps unsigned int ppsteps = aiProcess_CalcTangentSpace | // calculate tangents and bitangents if possible aiProcess_JoinIdenticalVertices | // join identical vertices/ optimize indexing aiProcess_ValidateDataStructure | // perform a full validation of the loader's output aiProcess_ImproveCacheLocality | // improve the cache locality of the output vertices aiProcess_RemoveRedundantMaterials | // remove redundant materials aiProcess_FindDegenerates | // remove degenerated polygons from the import aiProcess_FindInvalidData | // detect invalid model data, such as invalid normal vectors aiProcess_GenUVCoords | // convert spherical, cylindrical, box and planar mapping to proper UVs aiProcess_TransformUVCoords | // preprocess UV transformations (scaling, translation ...) aiProcess_FindInstances | // search for instanced meshes and remove them by references to one master aiProcess_LimitBoneWeights | // limit bone weights to 4 per vertex aiProcess_OptimizeMeshes | // join small meshes, if possible; aiProcess_SplitByBoneCount | // split meshes with too many bones. Necessary for our (limited) hardware skinning shader 0; cout << "Loading " << pFile << "... "; aiPropertyStore* props = aiCreatePropertyStore(); aiSetImportPropertyInteger(props,AI_CONFIG_IMPORT_TER_MAKE_UVS,1); aiSetImportPropertyFloat(props,AI_CONFIG_PP_GSN_MAX_SMOOTHING_ANGLE,80.f); aiSetImportPropertyInteger(props,AI_CONFIG_PP_SBP_REMOVE, aiPrimitiveType_LINE | aiPrimitiveType_POINT); aiSetImportPropertyInteger(props,AI_CONFIG_GLOB_MEASURE_TIME,1); //aiSetImportPropertyInteger(props,AI_CONFIG_PP_PTV_KEEP_HIERARCHY,1); // Call ASSIMPs C-API to load the file scene = (aiScene*)aiImportFileExWithProperties(pFile.c_str(), ppsteps | /* default pp steps */ aiProcess_GenSmoothNormals | // generate smooth normal vectors if not existing aiProcess_SplitLargeMeshes | // split large, unrenderable meshes into submeshes aiProcess_Triangulate | // triangulate polygons with more than 3 edges //aiProcess_ConvertToLeftHanded | // convert everything to D3D left handed space aiProcess_SortByPType | // make 'clean' meshes which consist of a single typ of primitives 0, NULL, props); aiReleasePropertyStore(props); if(!scene){ cout << aiGetErrorString() << endl; return 0; } this is the relevant piece of code in assimp view code // default pp steps unsigned int ppsteps = aiProcess_CalcTangentSpace | // calculate tangents and bitangents if possible aiProcess_JoinIdenticalVertices | // join identical vertices/ optimize indexing aiProcess_ValidateDataStructure | // perform a full validation of the loader's output aiProcess_ImproveCacheLocality | // improve the cache locality of the output vertices aiProcess_RemoveRedundantMaterials | // remove redundant materials aiProcess_FindDegenerates | // remove degenerated polygons from the import aiProcess_FindInvalidData | // detect invalid model data, such as invalid normal vectors aiProcess_GenUVCoords | // convert spherical, cylindrical, box and planar mapping to proper UVs aiProcess_TransformUVCoords | // preprocess UV transformations (scaling, translation ...) aiProcess_FindInstances | // search for instanced meshes and remove them by references to one master aiProcess_LimitBoneWeights | // limit bone weights to 4 per vertex aiProcess_OptimizeMeshes | // join small meshes, if possible; aiProcess_SplitByBoneCount | // split meshes with too many bones. Necessary for our (limited) hardware skinning shader 0; aiPropertyStore* props = aiCreatePropertyStore(); aiSetImportPropertyInteger(props,AI_CONFIG_IMPORT_TER_MAKE_UVS,1); aiSetImportPropertyFloat(props,AI_CONFIG_PP_GSN_MAX_SMOOTHING_ANGLE,g_smoothAngle); aiSetImportPropertyInteger(props,AI_CONFIG_PP_SBP_REMOVE,nopointslines ? aiPrimitiveType_LINE | aiPrimitiveType_POINT : 0 ); aiSetImportPropertyInteger(props,AI_CONFIG_GLOB_MEASURE_TIME,1); //aiSetImportPropertyInteger(props,AI_CONFIG_PP_PTV_KEEP_HIERARCHY,1); // Call ASSIMPs C-API to load the file g_pcAsset->pcScene = (aiScene*)aiImportFileExWithProperties(g_szFileName, ppsteps | /* configurable pp steps */ aiProcess_GenSmoothNormals | // generate smooth normal vectors if not existing aiProcess_SplitLargeMeshes | // split large, unrenderable meshes into submeshes aiProcess_Triangulate | // triangulate polygons with more than 3 edges aiProcess_ConvertToLeftHanded | // convert everything to D3D left handed space aiProcess_SortByPType | // make 'clean' meshes which consist of a single typ of primitives 0, NULL, props); aiReleasePropertyStore(props); As you can see the code is nearly identical because I copied from assimp view. What could be the reason for such a difference in performance? The two software are using the same dll Assimp64.dll (compiled in my computer with vc++ 2010 express) and the same function aiImportFileExWithProperties to load the model, so I assume that the actual code employed is the same. How is it possible that the function aiImportFileExWithProperties is 100 times slower when called by my sotware than when called by assimp view? What am I missing? I am not good with dll, dynamic and static libraries so I might be missing something obvious. ------------------------------ UPDATE I found out the reason why the code is going slower. Basically I was running my software with "Start debugging" in VC++ 2010 Express. If I run the code outside VC++ 2010 I get same performance of assimp view. However now I have a new question. Why does the dll perform slower in VC++ debugging? I compiled it in release mode without debugging information. Is there any way to have the dll go fast in debugmode i.e. not debugging the dll? Because I am interested in debugging only my own code, not the dll that I assume is already working fine. I do not want to wait 2 minutes every time I want to load my software to debug. Does this request make sense?

  Read the article

• Using SQL Source Control with Fortress or Vault &ndash; Part 1

  - by AjarnMark

  I am fanatical when it comes to managing the source code for my company.  Everything that we build (in source form) gets put into our source control management system.  And I’m not just talking about the UI and middle-tier code written in C# and ASP.NET, but also the back-end database stuff, which at times has been a pain.  We even script out our Scheduled Jobs and keep a copy of those under source control. The UI and middle-tier stuff has long been easy to manage as we mostly use Visual Studio which has integration with source control systems built in.  But the SQL code has been a little harder to deal with.  I have been doing this for many years, well before Microsoft came up with Data Dude, so I had already established a methodology that, while not as smooth as VS, nonetheless let me keep things well controlled, and allowed doing my database development in my tool of choice, Query Analyzer in days gone by, and now SQL Server Management Studio.  It just makes sense to me that if I’m going to do database development, let’s use the database tool set.  (Although, I have to admit I was pretty impressed with the demo of Juneau that Don Box did at the PASS Summit this year.)  So as I was saying, I had developed a methodology that worked well for us (and I’ll probably outline in a future post) but it could use some improvement. When Solutions and Projects were first introduced in SQL Management Studio, I thought we were finally going to get our same experience that we have in Visual Studio.  Well, let’s say I was underwhelmed by Version 1 in SQL 2005, and apparently so were enough other people that by the time SQL 2008 came out, Microsoft decided that Solutions and Projects would be deprecated and completely removed from a future version.  So much for that idea. Then I came across SQL Source Control from Red-Gate.  I have used several tools from Red-Gate in the past, including my favorites SQL Compare, SQL Prompt, and SQL Refactor.  SQL Prompt is worth its weight in gold, and the others are great, too.  Earlier this year, we upgraded from our earlier product bundles to the new Developer Bundle, and in the process added SQL Source Control to our collection.  I thought this might really be the golden ticket I was looking for.  But my hopes were quickly dashed when I discovered that it only integrated with Microsoft Team Foundation Server and Subversion as the source code repositories.  We have been using SourceGear’s Vault and Fortress products for years, and I wholeheartedly endorse them.  So I was out of luck for the time being, although there were a number of people voting for Vault/Fortress support on their feedback forum (as did I) so I had hope that maybe next year I could look at it again. But just a couple of weeks ago, I was pleasantly surprised to receive notice in my email that Red-Gate had an Early Access version of SQL Source Control that worked with Vault and Fortress, so I quickly downloaded it and have been putting it through its paces.  So far, I really like what I see, and I have been quite impressed with Red-Gate’s responsiveness when I have contacted them with any issues or concerns that I have had.  I have had several communications with Gyorgy Pocsi at Red-Gate and he has been immensely helpful and responsive. I must say that development with SQL Source Control is very different from what I have been used to.  This post is getting long enough, so I’ll save some of the details for a separate write-up, but the short story is that in my regular mode, it’s all about the script files.  Script files are King and you dare not make a change to the database other than by way of a script file, or you are in deep trouble.  With SQL Source Control, you make your changes to your development database however you like.  I still prefer writing most of my changes in T-SQL, but you can also use any of the GUI functionality of SSMS to make your changes, and SQL Source Control “manages” the script for you.  Basically, when you first link your database to source control, the tool generates scripts for every primary object (tables and their indexes are together in one script, not broken out into separate scripts like DB Projects do) and those scripts are checked into your source control.  So, if you needed to, you could still do a GET from your source control repository and build the database from scratch.  But for the day-to-day work, SQL Source Control uses the same technique as SQL Compare to determine what changes have been made to your development database and how to represent those in your repository scripts.  I think that once I retrain myself to just work in the database and quit worrying about having to find and open the right script file, that this will actually make us more efficient. And for deployment purposes, SQL Source Control integrates with the full SQL Compare utility to produce a synchronization script (or do a live sync).  This is similar in concept to Microsoft’s DACPAC, if you’re familiar with that. If you are not currently keeping your database development efforts under source control, definitely examine this tool.  If you already have a methodology that is working for you, then I still think this is worth a review and comparison to your current approach.  You may find it more efficient.  But remember that the version which integrates with Vault/Fortress is still in pre-release mode, so treat it with a little caution.  I have found it to be fairly stable, but there was one bug that I found which had inconvenient side-effects and could have really been frustrating if I had been running this on my normal active development machine.  However, I can verify that that bug has been fixed in a more recent build version (did I mention Red-Gate’s responsiveness?).

  Read the article

• How to UEFI install Ubuntu 12.10?

  - by Geezanansa

  Running a newer FM1 motherboard which is using an AMD 3870k APU with a new 1TB HDD. Following the advice in the motherboard manual and https://help.ubuntu.com/community/UEFI have now got to grub option screen for UEFI install. see http://imgur.com/VW5vz The dvd.iso being used is Ubuntu 12.10 desktop amd64 from ubuntu .com. The hdd has had a gpt partition table made for, by using gparted when in a live desktop session when booted in bios mode. (*edit/update: Although the old cd updates on running it is an old kernel and it did make a gpt but that version of gparted uses fdisk whereas gdisk is required to make gpt. Think am going to have to spend more time here http://www.dedoimedo.com/computers/gparted.html lol Using the gparted from 12.10 live session to make partitions; following the guidance regarding this at https://help.ubuntu.com/community/UEFI#Creating_an_EFI_partition, but can only boot to grub option screen http://imgur.com/VW5vz when 12.10 options to "try ubuntu" or "install ubuntu" are selected they give errors as described below*) but after making the gpt decided to leave it unformatted/unallocated space with the intention of using installer to set up partitions. update-originally but gparted now sees hdd as http://imgur.com/hFIvm as described above. *Booting live dvd in EFI mode gives "Secure Boot not installed" just before grub kernel option list with the option to "install ubuntu" but get "can not read cd/0" and "the kernel must be loaded first" errors; when that option is selected. Any pointers on how to get installer going for UEFI install would be good. Thanks in advance. update: Hopefully these screenshots can help better highlight where i am going wrong or if there is something else going on http://imgur.com/g30RB, http://imgur.com/VW5vz, http://imgur.com/31E0q, http://imgur.com/bnuaG, http://imgur.com/y4KGu, http://imgur.com/3u2QE, http://imgur.com/n9lN3, http://imgur.com/FEKvz, http://imgur.com/hFIvm, update: Thank you fernando garcia for pointing me in the right direction to start the process of elimantion. What i have done since asking question is a little home work starting here http://askubuntu.com/faq#bounty and here http://askubuntu.com/questions/how-to-ask. Looking at other similar questions was good fun and found this 12.10 UEFI Secure Boot install the most relative in helping getting ubuntu to uefi install on my system. In response to wolverine's question this article was referred to http://web.dodds.net/~vorlon/wiki/blog/SecureBoot_in_Ubuntu_12.10/ This article in the first sentence gives a link to http://www.ubuntu.com/download which is where i downloaded the 12.10 desktop amd64 .iso(and others) but have been unable to do a efi install of ubuntu on this system and as this is a new system have ended up just going with bios installer running which at least puts my mind at ease that i have not bricked my new mobo.(had to do a clrcmos and flash to latest bios version) So it possibly could be the bios settings or the bios version being used that is problem. To try and eliminate bios version i can not get to post screen in order to id bios version being used. Pressing tab to show post instead of logo and trying to pausebreak to catch post is proving difficult. If logo screen in bios is disabled just get black screen no post shown and pressing tab does not show post. Appreciate using appropriate bios settings and latest 12.10 release should simply get uefi installer running when selected from the grub list (nice graphic details in Identifying if computer boots the cd in efi mode section at https://help.ubuntu.com/community/UEFI#Identifying_if_the_computer_boots_the_CD_in_EFI_mode) And to confirm the hdd is booting in efi mode https://help.ubuntu.com/community/UEFI#Identifying_if_the_computer_boots_the_HDD_in_EFI_mode running the command [ -d /sys/firmware/efi ] && echo "EFI boot on HDD" || echo "Legacy boot on HDD" gave Legacy boot on HDD This is as expected because i allowed the bios installer (which was 12.04 desktop amd64 after trying 12.10 desktop amd64 in efi mode) to run to get a working installation. Which is not what was intended or wished for but wanted to get a working os to bench test new mobo i.e. prove it is working. There are other options as in installing other bootmanagers/loaders but do not wish to do so as shim should get grub2 going that is after secure boot has been signed.(Now got rough idea what should happen just it aint happening. Is it possible ahci drivers are required?) Will post boot info script url of the updated config/setup. The original question asked seems irrelevant to what is being said in this update but as the problem is not resolved will keep on trying efi installing! i.e the problem is same as when question asked just trying to update. Have tried to edit and update the best i can!

  Read the article

• A new SQL, a new Analysis Services, a new Workshop! #ssas #sql2012

  - by Marco Russo (SQLBI)

  One week ago Microsoft SQL Server 2012 finally debuted with a virtual launch event and you can find many intro sessions there (20 minutes each). There is a lot of new content available if you want to learn more about SQL 2012 and in this blog post I’d like to provide a few link to sessions, documents, bits and courses that are available now or very soon. First of all, the release of Analysis Services 2012 has finally released PowerPivot 2012 (many of us called it PowerPivot v2 before this official name) and also the new Data Mining Add-in for Microsoft Office 2010, now available also for Excel 64bit! And, of course, don’t miss the Microsoft SQL Server 2012 Feature Pack, there are a lot of upgrades for both DBAs and developers. I just discovered there is a new LocalDB version of SQL Express that can run in user mode without any setup. Is this the end of SQL CE? But now, back to Analysis Services: if you want some tutorial on Tabular, the Microsoft Virtual Academy has a whole track dedicated to Analysis Services 2012 but you will probably be interested also in the one about Reporting Services 2012. If you think that virtual is good but it’s not enough, there are plenty of conferences in the coming months – these are just those where I and Alberto will deliver some SSAS Tabular presentations: SQLBits X, London, March 29-31, 2012: if you are in London or want a good reason to go, this is the most important SQL Server event in Europe this year, no doubts about it. And not only because of the high number of attendees, but also because there is an impressive number of speakers (excluding me, of course) coming from all over the world. This is an event second only to PASS Summit in Seattle so there are no good reasons to not attend it. Microsoft SQL Server & Business Intelligence Conference 2012, Milan, March 28-29, 2012: this is an Italian conference so the language might be a barrier, but many of us also speak English and the food is good! Just a few seats still available. TechEd North America, Orlando, June 11-14, 2012: you know, this is a big event and it contains everything – if you want to spend a whole day learning the SSAS Tabular model with me and Alberto, don’t miss our pre-conference day “Using BISM Tabular in Microsoft SQL Server Analysis Services 2012” (be careful, it is on June 10, a nice study-Sunday!). TechEd Europe, Amsterdam, June 26-29, 2012: the European version of TechEd provides almost the same content and you don’t have to go overseas. We also run the same pre-conference day “Using BISM Tabular in Microsoft SQL Server Analysis Services 2012” (in this case, it is on June 25, that’s a regular Monday). I and Alberto will also speak at some user group meeting around Europe during… well, we’re going to travel a lot in the next months. In fact, if you want to get a complete training on SSAS Tabular, you should spend two days with us in one of our SSAS Tabular Workshop! We prepared a 2-day seminar, a very intense one, that start from the simple tabular modeling and cover architecture, DAX, query, advanced modeling, security, deployment, optimization, monitoring, relationships with PowerPivot and Multidimensional… Really, there are a lot of stuffs here! We announced the first dates in Europe and also an online edition optimized for America’s time zone: Apr 16-17, 2012 – Amsterdam, Netherlands Apr 26-27, 2012 – Copenhagen, Denmark May 7-8, 2012 – Online for America’s time zone May 14-15, 2012 – Brussels, Belgium May 21-22, 2012 – Oslo, Norway May 24-25, 2012 – Stockholm, Sweden May 28-29, 2012 – London, United Kingdom May 31-Jun 1, 2012 – Milan, Italy (Italian language) Also Chris Webb will join us in this workshop and in every date you can find who is the speaker on the web site. The course is based on our upcoming book, almost 600 pages (!) about SSAS Tabular, an incredible effort that will be available very soon in a preview (rough cuts from O’Reilly) and will be on the shelf in May. I will provide a link to order it as soon as we have one! And if you think that this is not enough… you’re right! Do you know what is the only thing you can do to optimize your Tabular model? Optimize your DAX code. Learning DAX is easy, mastering DAX requires some knowledge… and our DAX Advanced Workshop will provide exactly the required content. Public classes will be available later this year, by now we just deliver it on demand.

  Read the article

• NoSQL Java API for MySQL Cluster: Questions & Answers

  - by Mat Keep

  The MySQL Cluster engineering team recently ran a live webinar, available now on-demand demonstrating the ClusterJ and ClusterJPA NoSQL APIs for MySQL Cluster, and how these can be used in building real-time, high scale Java-based services that require continuous availability. Attendees asked a number of great questions during the webinar, and I thought it would be useful to share those here, so others are also able to learn more about the Java NoSQL APIs. First, a little bit about why we developed these APIs and why they are interesting to Java developers. ClusterJ and Cluster JPA ClusterJ is a Java interface to MySQL Cluster that provides either a static or dynamic domain object model, similar to the data model used by JDO, JPA, and Hibernate. A simple API gives users extremely high performance for common operations: insert, delete, update, and query. ClusterJPA works with ClusterJ to extend functionality, including - Persistent classes - Relationships - Joins in queries - Lazy loading - Table and index creation from object model By eliminating data transformations via SQL, users get lower data access latency and higher throughput. In addition, Java developers have a more natural programming method to directly manage their data, with a complete, feature-rich solution for Object/Relational Mapping. As a result, the development of Java applications is simplified with faster development cycles resulting in accelerated time to market for new services. MySQL Cluster offers multiple NoSQL APIs alongside Java: - Memcached for a persistent, high performance, write-scalable Key/Value store, - HTTP/REST via an Apache module - C++ via the NDB API for the lowest absolute latency. Developers can use SQL as well as NoSQL APIs for access to the same data set via multiple query patterns – from simple Primary Key lookups or inserts to complex cross-shard JOINs using Adaptive Query Localization Marrying NoSQL and SQL access to an ACID-compliant database offers developers a number of benefits. MySQL Cluster’s distributed, shared-nothing architecture with auto-sharding and real time performance makes it a great fit for workloads requiring high volume OLTP. Users also get the added flexibility of being able to run real-time analytics across the same OLTP data set for real-time business insight. OK – hopefully you now have a better idea of why ClusterJ and JPA are available. Now, for the Q&A. Q & A Q. Why would I use Connector/J vs. ClusterJ? A. Partly it's a question of whether you prefer to work with SQL (Connector/J) or objects (ClusterJ). Performance of ClusterJ will be better as there is no need to pass through the MySQL Server. A ClusterJ operation can only act on a single table (e.g. no joins) - ClusterJPA extends that capability Q. Can I mix different APIs (ie ClusterJ, Connector/J) in our application for different query types? A. Yes. You can mix and match all of the API types, SQL, JDBC, ODBC, ClusterJ, Memcached, REST, C++. They all access the exact same data in the data nodes. Update through one API and new data is instantly visible to all of the others. Q. How many TCP connections would a SessionFactory instance create for a cluster of 8 data nodes? A. SessionFactory has a connection to the mgmd (management node) but otherwise is just a vehicle to create Sessions. Without using connection pooling, a SessionFactory will have one connection open with each data node. Using optional connection pooling allows multiple connections from the SessionFactory to increase throughput. Q. Can you give details of how Cluster J optimizes sharding to enhance performance of distributed query processing? A. Each data node in a cluster runs a Transaction Coordinator (TC), which begins and ends the transaction, but also serves as a resource to operate on the result rows. While an API node (such as a ClusterJ process) can send queries to any TC/data node, there are performance gains if the TC is where most of the result data is stored. ClusterJ computes the shard (partition) key to choose the data node where the row resides as the TC. Q. What happens if we perform two primary key lookups within the same transaction? Are they sent to the data node in one transaction? A. ClusterJ will send identical PK lookups to the same data node. Q. How is distributed query processing handled by MySQL Cluster ? A. If the data is split between data nodes then all of the information will be transparently combined and passed back to the application. The session will connect to a data node - typically by hashing the primary key - which then interacts with its neighboring nodes to collect the data needed to fulfil the query. Q. Can I use Foreign Keys with MySQL Cluster A. Support for Foreign Keys is included in the MySQL Cluster 7.3 Early Access release Summary The NoSQL Java APIs are packaged with MySQL Cluster, available for download here so feel free to take them for a spin today! Key Resources MySQL Cluster on-line demo  MySQL ClusterJ and JPA On-demand webinar  MySQL ClusterJ and JPA documentation MySQL ClusterJ and JPA whitepaper and tutorial

  Read the article

< Previous Page | 449 450 451 452 453 454 455 456 457 458 459 460  | Next Page >