Search Results

Search found 15209 results on 609 pages for 'configuration'.

Page 457/609 | < Previous Page | 453 454 455 456 457 458 459 460 461 462 463 464  | Next Page >

• 3GB RAM Installed and Detected by BIOS, Windows Vista 32bit Only Sees 2GB

  - by Nathan Taylor

  I am attempting to install more RAM on a Windows Vista 32bit machine which is using a X6DAL-XG motherboard and the RAM amount reported in the BIOS is 3GB+, but Windows is only reporting 2GB installed. The motherboard has 6 RAM bays which I have populated with various combinations of 4 1GB sticks, and 2 512mb sticks, but no matter how I configure them Windows doesn't see more than 2GB. I realize of course 32-bit Windows has a 3gb cap on memory, but that doesn't explain why it will only report 2GB when there are in fact (currently) 5GB installed. I should think I would be able to see at least 3GB. According to the spec list for the motherboard the minimum RAM requirements are DDR333/266mhz installed in pairs. I have done this exactly, and the BIOS isn't reporting any problems at POST. RAM Configuration (according to CPU-Z): Slot #1: Kingston 128mx72D266C25 - 1024mb PC2100 (133mhz) Slot #2: Kingston KVR266X72RC25/1024 - 1024mb PC2100 (133mhz) Slot #3: PQI - 512mb PC2700 (166mhz) Slot #4: Kingston 128mx72D266C25 - 1024mb PC2100 (133mhz) Slot #5: Kingston KVR266X72RC25/1024 - 1024mb PC2100 (133mhz) Slot #6: PQI - 512mb PC2700 (166mhz) I'm not sure if memory specs above conflict with this statement in the motherboard manual or not: Memory Support The X6DAL-XG supports up to 12GB/24GB of registered ECC DDR333/266 (PC2700/PC2100) memory. The motherboard was designed to support 4GB (PC2100) modules in each slot, but only the 2GB modules have been tested. When using registered ECC DDR333 (PC2700) memory, installing four pieces of double-banked memory or six pieces of single-banked memory is supported. So, am I doing something wrong with the RAM I have now, or is there some sort of compatibility problem which I am missing? Thanks!

  Read the article

• Tomcat 6 Windows Server 64 Redirect Connector Fails

  - by Rafe

  So is there some problem with running the Tomcat connectors under a 64 bit windows OS? Here's my configuration: Windows Server 2003 64 bit Intel Xeon Tomcat 6.0.26 JVM 1.6.0 (64bit) ISAPI Redirect Connector 1.2.30.0 (64 bit) Calling the IP address of the site with :8080 brings up the tomcat page so I know that's running and the examples all work so its obviously not having a problem with the JVM. Calling the site ip on port 80 however gives me error 324 - looking at the application log on windows shows "Could not load all ISAPI filters for site/service. Therefore startup aborted". The ISAPI filter page under the web site properties shows the status of this filter to be down with a red arrow. The ISAPI filter name is jakarta and there is a corresponding virtual directory set up in the root of the site pointing to the same directory as the filter. The jakarta web service extension is also pointing to the required dll (c:\program files\apache software foundation\jakarta isapi redirector\bin\isapi_redirect.dll). Incidentally, this same problem occurs when trying to use Tomcat 5.5. I've also tried swapping out various redirect versions. It's really odd because I got it to work once with a version of the redirector that came with Plesk but I've since uninstalled everything to do with plesk and even trying to use the plesk-compiled dll doesn't work now. I am pulling my hair out on this, any ideas?

  Read the article

• JBossMQ - Clustered Queues/NameNotFoundException: QueueConnectionFactory error

  - by mfarver

  I am trying to get an application working on a JBoss Cluster. It uses Queues internally, and the developer claims that it should work correctly in a clustered environment. I have jbossmq setup as a ha-singleton on the cluster. The application works correctly on whichever node currently is running the queue, but fails on the other nodes with a: "javax.naming.NameNotFoundException: QueueConnectionFactory not bound" error. I can look at JNDIview from the jmx-console and see that indeed the QueueConnectionFactory class only appears on the primary node in the Global context. Is there a way to see the Cluster's JNDI listing instead of each server? The steps I took from a default Jboss 4.2.3.GA installation were to use the "all" configuration. Then removed /server/all/deploy/hsqldb-ds.xml and /deploy-hasingleton/jms/hsqldb-jdbc2-service.xml, copying the example/jms/mysq-jdbc2-service.xml file into its place (editing that file to use DefaultDS instead of MySqlDS). Finally I created a mysql-ds.xml file in the deploy directory pointing "DefaultDS" at an empty database. I created a -services.xml file in the deploy directory with the queue definition. like the one below: <server> <mbean code="org.jboss.mq.server.jmx.Queue" name="jboss.mq.destination:service=Queue,name=myfirstqueue"> <depends optional-attribute-name="DestinationManager"> jboss.mq:service=DestinationManager </depends> </mbean> </server> All of the other cluster features of working, the servers list each other in the view, and sessions are replicating back and forth. The JBoss documentation is somewhat light in this area, is there another setting I might have missed? Or is this likely to be a code issue (is there different code to do a JNDI lookup in a clusted environment?) Thanks

  Read the article

• Error 720 on VPN (PPTP) attempt

  - by Andy Shulman

  When I attempt to connect to a server running XP x64 (so essentially Server 2003) using a PPTP connection, it fails with client-side error Registering your computer on the network... Error 720: A connection to the remote computer could not be established. You might need to change the network settings for this configuration. and server-side error Event ID: 20050 The user WINSERV3\Andy connected to port VPN8-1 has been disconnected because no network protocols were successfully negotiated. I have configured the router to pass both TCP packets on 1723 and GRE packets. I have used Wireshark (filtering out ARP, UDP, and all TCP ports other than 1723) to observe the packets received by the server. Wireshark does not explicitly name any protocol GRE, but it does tell me the server sent and received TCP, PPTP, PPP LCP, PPP CHAP, PPP CBCP, and PPP IPCP. The connection seems to go wrong at packet 30, where the protocol is PPP LCP, with the payload of the packet being labeled "Protocol Reject". Obviously, this is going from server to client. This would seem to lead to the conclusion that there is something wrong with my client, which runs Windows 7 Ultimate x64. However, it is able to connect to my house's router, which runs the DD-WRT firmware and is thus a PPTP endpoint. I'm thoroughly at a loss. Please help!

  Read the article

• iTunes' clandestine proxy settings

  - by pilcrow

  Problem: One user's iTunes consults a defunct HTTP proxy, but only for iTunes Store HTTP requests -- other iTunes web requests are unproxied. How do I dismiss this spurious proxy setting? Background: It's not as easy as Internet Options. Years ago my network had a mandatory HTTP proxy at 172.31.1.1:8080. When we switched to the 192.168.1/24 space and eliminated the proxy, this user's iTunes -- the only iTunes user at the time -- could no longer contact the iTunes Store, an operation which fails with "unknown error -9808". This has been the case through several iTunes.exe upgrades over the years and prevents, among other things, activation of a new or newly upgraded iPhone. wireshark and TCPView confirm that this user's iTunes.exe is attempting to contact the long-defunct http proxy when attempting to reach the iTunes Store, but is otherwise unproxied. Curious details: No other iTunes.exe HTTP traffic for this user is affected -- iTunes can successfully make HTTP chatter at Apple's servers. No other web traffic at all is proxied, whether this user or others, iTunes or browser, etc. I cannot find the spurious proxy setting anywhere in the registry nor on disk, though perhaps I haven't thought of every place to look and every format to look for. Other users who have experienced the same error code all seem to have unrelated web configuration problems (certificate validation, for example). UPDATE in response to Phoshi's excellent suggestion, reinstallation hasn't done the trick.

  Read the article

• Exchange 2007 two node cluster setup on Windows 2008 Enterprise, install error

  - by Shadow00Caster

  I am installing Microsoft Exchange 2007 x64 in a two node environment using Microsoft Windows 2008 Enterprise x64. The Failover Cluster is all setup properly and following best practices for setting up the windows clustering for use with Exchange 2007. All the validation tests pass on the cluster and all of that portion is working fine. The problem is when I go to install the first Exchange node as an Active mailbox in configuration for a two node CCR. It gets all the way through the first 3 steps (Copy Exchange Files, Management Tools, Mailbox Role) and then fails on the 4th step 'Clustered Mailbox Server' with the following error: Error: The clustered mailbox server's group 'XXXX' was not found, and should already exist. Firewalls are all disabled, DNS is all setup properly, the environment has 3 domain controllers all 2k8 ent x64, all replication works. The name I pick for the CCR cluster (XXX) does not exist in AD or in DNS. I have attempted this install from both of the two Exchange nodes and multiple times .. tried with different names. I have been banging my head against the wall for days working on this and would appreciate any feedback on the issue.

  Read the article

• Cannot Change "Log on through Terminal Services" in Local Security Policy XP from Server 2008 GP

  - by Campo

  This is a mixed AD environment, Server 2003 R2 and 2008 R2 I have a 2003 AD R2 and a 2008 R2 AD. GPO is usually managed from the 2008 R2 machine. I have a RD Gateway on another server as well. I setup the CAP and RAP to allow a normal user to log on to the departments workstation. I also adjusted the GPO for that OU to allow Log on trhough Remote Desktop Gateway for the user group. This worked on my windows 7 workstation. But unfortunately the policy is a different name in XP "allow log on through Terminal Services" I can get through right into the machine but when the log on actually happens to the local machine i get the "Cannot log on interactively" error. This is set in (for the local machine) Secpol.msc Local Security Policy "user rights assignment" but is controlled by the GPO in Computer Configuration Policies Security Settings Local Policies "User Rights Assignment" Do I simply need to adjust the same setting on the same GPO but with a server 2003 GP editor? Feel like that could cause issues... Looking for some direction. Or if anyone has run into this issue yet. UPDATE Should this work? support.microsoft.com/kb/186529 Still seems like I will have the issue as the actual GP settings for Log on through Terminal Services is still different between Server 2008 R2 and 2003 R2.... Another Thought: Should I delete the GPO made for the department and remake it with the 2003 R2 server? I have no 2008 specific settings as the whole department runs XP other than myself. If that's a solution I will move my computer out of the department as a solution... Thoughts?

  Read the article

• Sharepoint db issue after DB move to SQL 08

  - by JohnyV

  Recently we have moved our sharepoint 2007 db from sql 2000 server to 2008 x64 SQL server. All seems well, however there is a problem where the sql server stops running and the service has to be restarted. The errors mention insufficient internal memory etc. I have tried to start the db using -g384 which is the default in sql 2000 but 256 is default for 2008 I believe. This has not rectified the issue. I was advised that perhaps the issue may be rectified by upgrading to wss 3.0 sp2 however When I have tried to install this i get another error post sp2 update and have to refer back to a vm snapshot. The error after the service pack is Server error: http://go.microsoft.com/fwlink?LinkID=96177 So I guess I have a few questions How can I fix the first issue and the 2nd issue. I have checked out many forums and posts and have tried a few things and still get no joy. Any assistance would be great. UPDATE I have fixed the Server error: http://go.microsoft.com/fwlink?LinkID=96177 the i needed to run the wss sp2 as well as the office servers sp2 then the config wizard then the moss configuration worked. The errors I am getting in SQL are SQL Server was unable to run a new system task, either because there is insufficient memory or the number of configured sessions exceeds the maximum allowed in the server. Verify that the server has adequate memory. Use sp_configure with option 'user connections' to check the maximum number of user connections allowed. Use sys.dm_exec_sessions to check the current number of sessions, including user processes. A read operation on a large object failed while sending data to the client. A common cause for this is if the application is running in READ UNCOMMITED isolation level. The connection will be terminated. There is insufficient system memory in resource pool 'internal' to run this query. These errors are by a user that was created as a service for sharepoint.

  Read the article

• unreadable corrupted ntfs partition - lost clusters reported

  - by Eduardo Martinez

  partition magic is reporting multiple 'bad file record signature' and 'lost clusters' errors on my 250GB samsung sata disk (connected via usb on a xp sp3). Unfortunately PM is unable to fix. PM shows the drive as being NTFS, detects used space ok and also drive name. But PM browser (right click on partition, browse...) won't show anything (as if disk was empty) Windows Explorer is not even picking the drive name and reports 'the file or directory is corrupted and unreadable' PTDD partition table doctor demo tells me the boot sector is fine, and I can see all disk content on its browser - but crucially cannot copy that content over to a new disk (PTDD browser is pretty arid to say the least) Also tried - photorec-6.11.3 - it actually started to extract files but wouldn't keep file names or any folder structure (maybe I missed sth on the configuration options) - find and mount - intellectual scan went well, the only partition on the disk was detected, then tried to mount into p: but got this error on windows explorer: 'p:\ is not accesible. The media is write protected'. Find and mount allows you to create an image from partition but I don't have a disk big enough at hand. Does anyone know if this will keep the extracted files/folders structure intact? I'm starting to think the disk is pretty screwed and my chances to recover this data are slim. Please someone enlighten me with that marvellous piece of software I am missing :-) Thanks in advance

  Read the article

• Jetty - 401 Unauthorized when using basic authentication

  - by JP.

  I am running SOLR on jetty in Ubuntu (a bitnami VM, if that helps) and am trying to lock down access to both the admin pages and the update/delete/etc. pages using basic authentication. When I attempt to connect to the admin console via a web browser I am prompted for a user name and password, but the username and password I use simply does not work. For test purposes I am using foo:bar as the credentials, but I receive a '401 Unauthorized' response. I see the following in my request log. 127.0.0.1 - - [10/Nov/2013:05:35:46 +0000] "GET /solr/ HTTP/1.1" 401 1376 Am I doing something wrong and/or is there anything obviously incorrect with the below configuration? Any help is greatly appreciated. Jetty.xml <Call name="addBean"> <Arg> <New class="org.eclipse.jetty.security.HashLoginService"> <Set name="name">solr</Set> <Set name="config"><SystemProperty name="jetty.home" default="."/>/etc/realm.properties</Set> <Set name="refreshInterval">5</Set> </New> </Arg> </Call> /etc/realm.properties foo: bar, solr_admin webdefault.xml <security-constraint> <web-resource-collection> <url-pattern>/</url-pattern> </web-resource-collection> <auth-constraint> <role-name>solr_admin</role-name> </auth-constraint> </security-constraint> <login-config> <auth-method>BASIC</auth-method> <realm-name>solr</realm-name> </login-config>

  Read the article

• Windows 7 search doesn’t find text strings

  - by Hugh Tash

  I’m not able to find any text strings starting not from the beginning of word in filename or in file content using Windows 7 search. My Windows 7 search configuration: Let’s say I’m searching for a documents containing word “content”. I’m able to find those documents when searching for “content”, “conte”, “con” (as long as the string includes the beginning of the word). "content" "con" But if I search for “ontent”, “tent” or any other combination that doesn’t include the beginning of the word, Windows search won't find it. I've tried other indexing/searching software such as Copernic Desktop search, Google desktop search. Those programs also weren’t able to find part of the word starting from the middle of the word. For instance, it finds “conte”, but doesn’t find “onte”. Finds “conte” Doesn’t find “onte” I got the same problem using Copernic desktop search. On the other hand, when I use non-indexing content search software such as Agent Ransack or FileSeek, I get the same results when searching for “conte” or “onte”: “conte” “onte” Why do all pre-indexing content search applications (Windows search, Google desktop, Copernic desktop search) fail to search for a string inside the words? Why do non-indexing applications find text strings wherever they are: in the beginning, middle or end of the word? I’ve tried wildcards and other constructions with no luck. *onte onte “onte” content:onte content:onte content:~onte All these searched doesn’t find the word “content”. How can I make Windows search find strings from any part of words? Could you try these searches and see if they work for you? Or is this normal behavior? Thank you. Update: Using wildcards before or after "onte" doesn't find any results. content:~=onte doesn't find any results.

  Read the article

• How to push changes from Test server to Live server?

  - by anonymous

  As a beginner, I finally noticed the issue with making changes to the live server I've been working on, now that I have a couple users on it, since I bring it down so often. I created an EC2 image of my live server and set up a separate instance on EC2, so now I have 2 EC2 instances, Stage and Production. I set up GitHub and push changes to stage and test my code there, and when it's all done and working, I push it to the production branch, and everything is good. And there is a slight issue here since I name my files config_stage.js and config_production.js and set up .gitignore on each server, and in my code, I would have it read the ENV flags and set up the appropriate configs, is this the correct approach? And my main question is: how do you keep track of non-code changes to the server? For example, I installed HAProxy, Stunnel, Redis, MongoDB and several other things onto the Stage server for testing and now that it's all working and good, how do I deploy them to production? Right now, I'm just keeping track of everything I installed and copying configuration files over, which is very tedious and I'm afraid I may have missed a step somewhere. Is there a better way to port these changes over from my test server to my live server?

  Read the article

• Unable to get defined path in 'source' type on AIX node

  - by haris

  hi all, I am trying to create a set of users on my AIX node and trying to get their authorized_keys which are already hosted on my server with name like, 'myuser_id_dsa.pub'. Currently i am managing 2 nodes (1. SLES 2. AIX). I defined the 'source' file paths in 2 separate contexts in fileserver.conf; [AIX] path myfiles/users/ssh/ allow *.another.mydomain.com [SLES] path myfiles/users/keys/ssh/ allow *.mydomain.com but when I run puppet then it ended successfully on my SLES node but encountered failure on AIX; with following err; /* Could not describe /AIX/myuser_id_rsa.pub: Fileserver module 'AIX' not mounted*/ in my code i have defined the 'source' with $filserver variable as: case $operatingsystem { "AIX": { $fileserver = "AIX" } default: { $fileserver = "SLES" } } file { "${home}/${username}/.ssh/authorized_keys": source = "puppet:///$fileserver/${username}_is_dsa.pub", ... ... } why AIX is not able to get the source path from my fileserver.conf while SLES is running absolutely fine? and how can I do it? I have to run similar configuration across different servers so I can only deal it with case statement. looking forward for your help Thanks

  Read the article

• Check for updates of a specific Debian package list

  - by Erwan Queffélec

  The setup I run a Debian Squeeze host that I use to build a multilanguage project (python, java, php...) and generate custom packages (debian and RPM) automatically (through jenkins) The problem The target distributions of those Debian packages are Etch, Lenny and Squeeze. But our project has some native dependencies that are available only through the DebianRelease + 1 repository (i.e Lenny + 1 == Squeeze, Squeeze + 1 == Wheezy). We for example, need the jetty packages from Squeeze in Lenny, and the cyrus-imapd-2.4 packages from Wheezy in Squeeze. Some additional info : Some package we can simply 'backport by hand' by mirroring the DebianRelease + 1 packages to our own repositories. For instance, the jetty package from Squeeze will run fine on Lenny because it doesn't need an s**tload of additional dependencies However we do need to rebuild some packages. For instance, cyrus-imapd-2.4 from Wheezy has a lot of unsatisfied dependencies on Squeeze. So we need to rebuild it in Squeeze and then upload it to our repo. The question I need to have a simple way of knowing if they are any updates on those extra packages (both "normal" and "security" updates). I could write a simple script that runs weekly, get some parameters from a file, and generate an update report. Let's say the file looks like this: jetty:squeeze cyrus-imapd-2.4:wheezy The script should run as normal user not to mess up the system apt configuration and issue the appropriate commands to generate that report. Does Debian has some built-in apt-* commands/options dedicated to that kind of problem I could use to write this script ? If not, can someone think of another clean solution to achieve what I need ?

  Read the article

• centos postfix send email problem

  - by Catalin

  Hello. I have a big problem with postfix. I can receive mail in webmin and outlook but I can't send (only on local I can - user to user). Dovecot is working just fine. Sendmail is disable. Please help me. postfix -n postfix: invalid option -- n postfix: fatal: usage: postfix [-c config_dir] [-Dv] command [root@xprivatecams usr]# postconf -n alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases broken_sasl_auth_clients = yes command_directory = /usr/sbin config_directory = /etc/postfix daemon_directory = /usr/libexec/postfix debug_peer_level = 2 home_mailbox = Maildir/ html_directory = no inet_interfaces = all mail_owner = postfix mailbox_command = mailq_path = /usr/bin/mailq.postfix manpage_directory = /usr/share/man milter_default_action = acceptsmtpd_tls_auth_only = no milter_protocol = 2 mydestination = $myhostname, localhost.$mydomain, localhost myhostname = xprivatecams.com mynetworks = 94.177.41.0/24, 127.0.0.0/8 newaliases_path = /usr/bin/newaliases.postfix non_smtpd_milters = inet:localhost:20207 queue_directory = /var/spool/postfix readme_directory = /usr/share/doc/postfix-2.3.3/README_FILES sample_directory = /usr/share/doc/postfix-2.3.3/samples sendmail_path = /usr/sbin/sendmail.postfix setgid_group = postdrop smtp_tls_note_starttls_offer = yes smtp_use_tls = yes smtpd_milters = inet:localhost:20207 smtpd_recipient_restrictions = permit_sasl_authenticated,permit_mynetworks,reject_unauth_destination smtpd_sasl_auth_enable = yes smtpd_sasl_authenticated_header = yes smtpd_sasl_local_domain = smtpd_sasl_security_options = noanonymous smtpd_tls_CAfile = /etc/postfix/ssl/cacert.pem smtpd_tls_auth_only = no smtpd_tls_cert_file = /etc/postfix/ssl/smtpd.crt smtpd_tls_key_file = /etc/postfix/ssl/smtpd.key smtpd_tls_loglevel = 1 smtpd_tls_received_header = yes smtpd_tls_session_cache_timeout = 3600s smtpd_use_tls = yes tls_random_source = dev:/dev/urandom unknown_local_recipient_reject_code = 550 Jan 18 00:46:17 xprivatecams postfix/postfix-script: starting the Postfix mail system Jan 18 00:46:17 xprivatecams postfix/master[15545]: daemon started -- version 2.3.3, configuration /etc/postfix Jan 18 00:48:00 xprivatecams postfix/pickup[15546]: EDE7EA8001B: uid=0 from=<[email protected]> Jan 18 00:48:00 xprivatecams postfix/cleanup[15817]: EDE7EA8001B: message-id=<[email protected]> Jan 18 00:48:00 xprivatecams opendkim[2776]: EDE7EA8001B: DKIM-Signature header added Jan 18 00:48:01 xprivatecams postfix/qmgr[15547]: EDE7EA8001B: from=<[email protected]>, size=615, nrcpt=1 (queue active) Jan 18 00:48:31 xprivatecams postfix/smtp[15820]: connect to mail.flabell.com[72.47.224.75]: Connection timed out (port 25) Jan 18 00:48:31 xprivatecams postfix/smtp[15820]: EDE7EA8001B: to=<[email protected]>, relay=none, delay=30, delays=0.08/0.03/30/0, dsn=4.4.1, status=deferred (connect to mail.flabell.com[72.47.224.75]: Connection timed out) telnet 94.177.41.70 25 Trying 94.177.41.70... Connected to xprivatecams.com (94.177.41.70). Escape character is '^]'. 220 xprivatecams.com ESMTP Postfix ehlo me 250-xprivatecams.com 250-PIPELINING 250-SIZE 10240000 250-VRFY 250-ETRN 250-STARTTLS 250-AUTH LOGIN PLAIN 250-AUTH=LOGIN PLAIN 250-ENHANCEDSTATUSCODES 250-8BITMIME 250 DSN

  Read the article

• Configure IPv6 routing

  - by godlark

  I've got IPv6 addresses from SIXXS. My host is connected with SIXXS network over a AICCU tunnel ("sixxs" interface). My host address is 2001:::2, the host on the end has address 2001:::1. On my host IPv6 is fully accessible. I have problem with configuring IPv6 network on VMs. I use VirtualBox, the VM (Ubuntu) uses tap1 (on the host bridged by br0) #!/bin/sh PATH=/sbin:/usr/bin:/bin:/usr/bin:/usr/sbin # create a tap tunctl -t tap1 ip link set up dev tap1 # create the bridge brctl addbr br0 brctl addif br0 tap1 # set the IP address and routing ip link set up dev br0 ip -6 route del 2001:6a0:200:172::/64 dev sixxs ip -6 route add 2001:6a0:200:172::1 dev sixxs ip -6 addr add 2001:6a0:200:172::2/64 dev br0 ip -6 route add 2001:6a0:200:172::2/64 dev br0 Host: routing table: 2001:6a0:200:172::1 dev sixxs metric 1024 2001:6a0:200:172::/64 dev br0 proto kernel metric 256 2001:6a0:200:172::/64 dev br0 metric 1024 2000::/3 dev sixxs metric 1024 fe80::/64 dev eth0 proto kernel metric 256 fe80::/64 dev sixxs proto kernel metric 256 fe80::/64 dev br0 proto kernel metric 256 fe80::/64 dev tap1 proto kernel metric 256 default via 2001:6a0:200:172::1 dev sixxs metric 1024 Guest: interface eth1 (it is connected with tap1): auto eth1 iface eth1 inet6 static address 2001:6a0:200:172::3 netmask 64 gateway 2001:6a0:200:172::2 Guest: routing table 2001:6a0:200:172::/64 dev eth1 proto kernel metric 256 fe80::/64 dev eth0 proto kernel metric 256 fe80::/64 dev eth1 proto kernel metric 256 default via 2001:6a0:200:172::2 dev eth1 metric 1024 The guest pings to the host, the host pings to the guest, the host pings to 2001:6a0:200:172::1, but the guest doesn't ping to 2001:6a0:200:172::1. The guest tries to ping, on the host (by tcdump) I can capture its packets, but the host doesn't send them to 2001:6a0:200:172::1. What have I missed in configuration?

  Read the article

• Vista ICS issue

  - by Bill Grey

  I have a strange problem with Internet Connection Sharing on a laptop running Vista Business. This laptop is connected to the internet via the ethernet port, which goes to an ADSL modem. it is automatically assigned the IP address 192.168.1.50, and the modem/gateway is 192.168.1.1 My friends laptop is running Vista Home. Previously, I would create an ad hoc wireless network, enable ICS, and everything would be perfect. My friend would have internet access via this. However, something has now mysteriously broken. If I enable ICS on the wireless connection, it resets my Local Area Connection, assigning it the manual IP address of 192.168.0.1, which means my connection to the internet is destroyed. Both wireless adapters on each network are assigned auto configuration addresses, in the 168. range. They can see each other fine, but my friends laptop cannot access the internet via mine, even after I have restored the Local Area Connection settings. I understand the computer with ICS enabled must have the IP of 192.168.0.1, but previously, before whatever went wrong, my wireless adapter would be 192.168.0.1 and my friends computer would get an IP via DHCP. I have also tried setting static IP address and making a bridge, none of which works. How can I fix this problem, and prevent enabling ICS from touching my Local Area Connection? Both machines have no firewall, have appropriate settings etc...

  Read the article

• Apache2 Enabling Includes module causes svn access to quit working

  - by Matthew Talbert

  I have dav_svn installed to provide http access to my svn repos. The url is directly under root, eg mywebsite.com/svn/individual-repo. This setup has been working great for some time. Now, I need SSI (server-side includes) for a project, so I enabled this module with a2enmod include. Now, tortoisesvn can't access the repo; it always returns a 301 permanent redirect. Some playing with it reveals I can access it in a browser if I'm sure to include the trailing / but it still doesn't work in TortoiseSVN. I've looked at all of the faq's for this problem with TortoiseSVN and apache, and none of them seem to apply to my problem. Anyone have any insight into this problem? I'm running Ubuntu 9.10 with Apache 2.2.12. The only change I've made to my configuration is to enable the includes mod. Here's my dav_svn conf: <Location /svn> DAV svn SVNParentPath /home/matthew/svn AuthType Basic AuthName "Subversion repository" AuthUserFile /etc/subversion/passwd Require valid-user </Location> and here's the relevant part of my virtual host conf: <Location /svn> SetHandler None Order allow,deny Allow from all </Location> Edit: OK, I've discovered that the real conflict is between the include module and basic authentication. That is, if I disable the include module, browse to the subversion repo, enter my user/pass for the basic authentication, I can browse it just fine. It even continues to work after I re-enable the include module. However, if I browse with another browser where I'm not already authenticated, then it no longer works.

  Read the article

• weblogic plug-in apache http server location directive question

  - by user39510

  We are using Weblogic Portal and Apache 2.x http server with the weblogic plug-in for apache for load-balancing. We have an application that right now can only be accessed from one of our managed servers. What I would like to do is use the Location directive to direct all requests for that page to the one managed server and I can't get it to work. The context that the portal tries to forward to is something like /MyWebApp?portalusername= (where equals a legitimate user. For example /MyWebApp?portalusername=joesmith. All other applications and the plug-in is load balancing as expected because every now and then you'll get sent to the second managed server for this particular application and its not deployed. I tried various things in the Apache http.conf like the following but can't seem to get it work. Any suggestions? The following is a snippet of the httpd.conf. Its a standard out of the box httpd.conf file with the weblogic plugin configuration. <Location /MyWebApp> SetHandler weblogic-handler WebLogicCluster myserver:7011 </Location> <Location /?> SetHandler weblogic-handler WebLogicCluster myserver:7011, myserver2:7012 </Location>

  Read the article

• getting "No LoginModules configured" for JAAS login under WebSphere security domain

  - by user1739040

  I have a JAX-RPC web service running on WebSphere V7. It requires a UserNameToken for security. I have a custom login module (MyLoginModule) which extracts the username and password, and that module is defined as a JAAS application login in the websphere admin console. Using IBM RAD 8.0, I have bound the token consumer to the login module using the JAAS config name of the module. This all works fine and happy on my development server. Now I realize, that for deployment to another server, I am required to move the JAAS login from global security to a security domain. When I do that, it breaks my web service. I get this SOAP Fault message: com.ibm.wsspi.wssecurity.SoapSecurityException: WSEC6520E: Construction of the login context failed. The exception is : javax.security.auth.login.LoginException: No LoginModules configured for MyLoginModule According to the IBM docs: The JAAS application logins, the JAAS system logins, and the JAAS J2C authentication data aliases can all be configured at the domain level. By default, all of the applications in the system have access to the JAAS logins configured at the global level. The security runtime first checks for the JAAS logins at the domain level. If it does not find them, it then checks for them in the global security configuration. Configure any of these JAAS logins at a domain only when you need to specify a login that is used exclusively by the applications in the security domain. So I am looking to make sure my application is in the domain, and I have tried everything I can think of. (I have assigned the domain to "all scopes", to the entire cell, etc.) No luck, I keep getting the same error response to my web service client. Any help or hints are appreciated.

  Read the article

• Snort/Barnyard2 Logging

  - by Eric

  I need some help with my Snort/Barnyard2 setup. My goal is to have Snort send unified2 logs to Barnyard2 and then have Barnyard2 send the data to other locations. Here is my currrent setup. OS Scientific Linux 6 Snort Version 2.9.2.3 Barnyard2 Version 2.1.9 Snort command snort -c /etc/snort/snort.conf -i eth2 & Barnyard2 command /usr/local/bin/barnyard2 -c /etc/snort/barnyard2.conf -d /var/log/snort -f snort.log -w /var/log/snort/barnyard.waldo & snort.conf output unified2: filename snort.log, limit 128 barnyard2.conf output alert_syslog: host=127.0.0.1 output database: log, mysql, user=snort dbname=snort password=password host=localhost With this setup, barnyard2 is showing all of the correct information in the database and I'm using BASE to view it on the web GUI. I was hoping to be able to send the full packet data to syslog with barnyard2 but after reading around, it seems that it is impossible to do that. So I then started trying to modify the snort.conf file and add lines like "output alert_full: alert.full". This definitely gave me a lot more information but still not the full packet data like I want. So my question is, is there anyway I can use barnyard2 to send the full packet data of alerts to a human readable file? Since I can't send it directly to syslog, I can create another process to take the data from that file and ship it off to another server. If not, what flags and/or snort.conf configuration would you recommend to get the most data possible but still be able to handle quite a bit of traffic? In the end of it all, these alerts will be shipped to a central server via a SSH tunnel. I'm trying to stay away from databases.

  Read the article

• Validating signature trust with gpg?

  - by larsks

  We would like to use gpg signatures to verify some aspects of our system configuration management tools. Additionally, we would like to use a "trust" model where individual sysadmin keys are signed with a master signing key, and then our systems trust that master key (and use the "web of trust" to validate signatures by our sysadmins). This gives us a lot of flexibility, such as the ability to easily revoke the trust on a key when someone leaves, but we've run into a problem. While the gpg command will tell you if a key is untrusted, it doesn't appear to return an exit code indicating this fact. For example: # gpg -v < foo.asc Version: GnuPG v1.4.11 (GNU/Linux) gpg: armor header: gpg: original file name='' this is a test gpg: Signature made Fri 22 Jul 2011 11:34:02 AM EDT using RSA key ID ABCD00B0 gpg: using PGP trust model gpg: Good signature from "Testing Key <[email protected]>" gpg: WARNING: This key is not certified with a trusted signature! gpg: There is no indication that the signature belongs to the owner. Primary key fingerprint: ABCD 1234 0527 9D0C 3C4A CAFE BABE DEAD BEEF 00B0 gpg: binary signature, digest algorithm SHA1 The part we care about is this: gpg: WARNING: This key is not certified with a trusted signature! gpg: There is no indication that the signature belongs to the owner. The exit code returned by gpg in this case is 0, despite the trust failure: # echo $? 0 How do we get gpg to fail in the event that something is signed with an untrusted signature? I've seen some suggestions that the gpgv command will return a proper exit code, but unfortunately gpgv doesn't know how to fetch keys from keyservers. I guess we can parse the status output (using --status-fd) from gpg, but is there a better way?

  Read the article

• Nagios plug-in check_snmp receives NO SNMP data from a CISCO Router

  - by Shehryar

  I have tried setting up Nagios on Ubuntu 10.10, successfully installed and can login to web interface, I am however stuck on configuring snmp or I am doing something wrong here, i have followed various sites / nagios wiki to setup configuration (cfg) files. When I check on the web interface, it gives the following error on one of my cisco router: Current Status: UNKNOWN (for 0d 2h 55m 56s) Status Information: SNMP problem - No data received from host CMD: /usr/bin/snmpget -t 1 -r 5 -m RFC1213-MIB -v 1 [authpriv] 192.168.1.1:161 ifOperStatus.1 On the command-line itself, when I type the following, it just sits there waiting and waiting : sudo /usr/local/nagios/libexec/check_snmp -H 192.168.1.1 -C Routers -o sysUpTime.0 When I type the following command : I get an OK /usr/bin/snmpget -v1 192.168.1.1:161 1.3.6.1.2.1.1.5.0 -c "Routers" I have configured SNMP properly on our cisco device as we can collect SNMP Data via two other monitoring tool (SolarWinds and Manage Engine), we are tempted towards Nagios as its opensource. Will be grateful if someone could assist in rectifying this situation and guide me with setting up nagios to monitor Cisco Routers, Switches and a Few Servers. We want to monitor Bandwidth, cpu utilization, uptime and other necessary counters. Will be grateful for your assistance Thanks for reading Shehryar

  Read the article

• How to configure Hyper-V failover cluster to live migrate when dynamic memory runs out?

  - by Matt Johnson

  Appologies in advance that this is not a direct programming question, but I have a feeling that the solution involves custom powershell scripts (maybe), so this is as good a place to ask as any. I maintain a website that has a large Hyper-V cluster for SQL Servers. We are using Windows 2008 R2 SP1, and the new "dynamic memory" feature. I've already ready reviewed the Best Practices Guide, and implemented it's suggested configuration. Everything works well, except that when SQL demand increases memory pressure to expand to more memory than is available on the physical machine, the memory status goes into the "Warning" state and stays there. I assume the hypervisor is using a swapfile on the host to fulfill the memory requirement, thus slowing the virtual machine down. When this happens, there are plenty of other nodes in the cluster that have available resources. I can live-migrate the virtual server over there and everything works, and the warnings go away. Now how can I automate this? I see no menu options in either Hyper-V or the Failover Cluster Manager for performing a migration or shutdown when dynamic memory goes into the warning state. Any ideas about how to script this, or monitor it and invoke the action directly, would be helpful. If the solution involves coding, powershell would be ideal, but I could envison this as a .Net Service that monitors for this state and kicks off the migration request. I just don't know what objects are involved in doing the monitoring or kicking off the live migration. Thanks in advance.

  Read the article

• Best Firewall product for hosting/housing environment?

  - by Raffael Luthiger

  I am searching for a firewall product (appliance or software) for an hosting/housing environment. The biggest problem is that the rules get very complex as more customers are behind the firewall. Some have only one server, others have a whole subnet. Some need NAT, some a VPN endpoint. Some customers want to only allow port http, others ssh as well. So the device needs to be able to support VLANs and it should be possible to group the rules per customer. Speed is another important point. And being able to manage redundant devices easily. I am searching for something that doesn't have all the extras like spam filter etc. I was searching a lot on the net but either they had all those extras as well (and with is an overloaded configuration interface) or they missed some of the features I need (e.g. VLAN). The VPN endpoint is not the an important criteria. We were thinking about a separate machine for it.

  Read the article

< Previous Page | 453 454 455 456 457 458 459 460 461 462 463 464  | Next Page >