jack back - Page 458 - Developer IT

Installing a DHCP Service On Win2k8 ( Windows Server 2008 )

- by Akshay Deep Lamba

Introduction Dynamic Host Configuration Protocol (DHCP) is a core infrastructure service on any network that provides IP addressing and DNS server information to PC clients and any other device. DHCP is used so that you do not have to statically assign IP addresses to every device on your network and manage the issues that static IP addressing can create. More and more, DHCP is being expanded to fit into new network services like the Windows Health Service and Network Access Protection (NAP). However, before you can use it for more advanced services, you need to first install it and configure the basics. Let’s learn how to do that. Installing Windows Server 2008 DHCP Server Installing Windows Server 2008 DCHP Server is easy. DHCP Server is now a “role” of Windows Server 2008 – not a windows component as it was in the past. To do this, you will need a Windows Server 2008 system already installed and configured with a static IP address. You will need to know your network’s IP address range, the range of IP addresses you will want to hand out to your PC clients, your DNS server IP addresses, and your default gateway. Additionally, you will want to have a plan for all subnets involved, what scopes you will want to define, and what exclusions you will want to create. To start the DHCP installation process, you can click Add Roles from the Initial Configuration Tasks window or from Server Manager à Roles à Add Roles. Figure 1: Adding a new Role in Windows Server 2008 When the Add Roles Wizard comes up, you can click Next on that screen. Next, select that you want to add the DHCP Server Role, and click Next. Figure 2: Selecting the DHCP Server Role If you do not have a static IP address assigned on your server, you will get a warning that you should not install DHCP with a dynamic IP address. At this point, you will begin being prompted for IP network information, scope information, and DNS information. If you only want to install DHCP server with no configured scopes or settings, you can just click Next through these questions and proceed with the installation. On the other hand, you can optionally configure your DHCP Server during this part of the installation. In my case, I chose to take this opportunity to configure some basic IP settings and configure my first DHCP Scope. I was shown my network connection binding and asked to verify it, like this: Figure 3: Network connection binding What the wizard is asking is, “what interface do you want to provide DHCP services on?” I took the default and clicked Next. Next, I entered my Parent Domain, Primary DNS Server, and Alternate DNS Server (as you see below) and clicked Next. Figure 4: Entering domain and DNS information I opted NOT to use WINS on my network and I clicked Next. Then, I was promoted to configure a DHCP scope for the new DHCP Server. I have opted to configure an IP address range of 192.168.1.50-100 to cover the 25+ PC Clients on my local network. To do this, I clicked Add to add a new scope. As you see below, I named the Scope WBC-Local, configured the starting and ending IP addresses of 192.168.1.50-192.168.1.100, subnet mask of 255.255.255.0, default gateway of 192.168.1.1, type of subnet (wired), and activated the scope. Figure 5: Adding a new DHCP Scope Back in the Add Scope screen, I clicked Next to add the new scope (once the DHCP Server is installed). I chose to Disable DHCPv6 stateless mode for this server and clicked Next. Then, I confirmed my DHCP Installation Selections (on the screen below) and clicked Install. Figure 6: Confirm Installation Selections After only a few seconds, the DHCP Server was installed and I saw the window, below: Figure 7: Windows Server 2008 DHCP Server Installation succeeded I clicked Close to close the installer window, then moved on to how to manage my new DHCP Server. How to Manage your new Windows Server 2008 DHCP Server Like the installation, managing Windows Server 2008 DHCP Server is also easy. Back in my Windows Server 2008 Server Manager, under Roles, I clicked on the new DHCP Server entry. Figure 8: DHCP Server management in Server Manager While I cannot manage the DHCP Server scopes and clients from here, what I can do is to manage what events, services, and resources are related to the DHCP Server installation. Thus, this is a good place to go to check the status of the DHCP Server and what events have happened around it. However, to really configure the DHCP Server and see what clients have obtained IP addresses, I need to go to the DHCP Server MMC. To do this, I went to Start à Administrative Tools à DHCP Server, like this: Figure 9: Starting the DHCP Server MMC When expanded out, the MMC offers a lot of features. Here is what it looks like: Figure 10: The Windows Server 2008 DHCP Server MMC The DHCP Server MMC offers IPv4 & IPv6 DHCP Server info including all scopes, pools, leases, reservations, scope options, and server options. If I go into the address pool and the scope options, I can see that the configuration we made when we installed the DHCP Server did, indeed, work. The scope IP address range is there, and so are the DNS Server & default gateway. Figure 11: DHCP Server Address Pool Figure 12: DHCP Server Scope Options So how do we know that this really works if we do not test it? The answer is that we do not. Now, let’s test to make sure it works. How do we test our Windows Server 2008 DHCP Server? To test this, I have a Windows Vista PC Client on the same network segment as the Windows Server 2008 DHCP server. To be safe, I have no other devices on this network segment. I did an IPCONFIG /RELEASE then an IPCONFIG /RENEW and verified that I received an IP address from the new DHCP server, as you can see below: Figure 13: Vista client received IP address from new DHCP Server Also, I went to my Windows 2008 Server and verified that the new Vista client was listed as a client on the DHCP server. This did indeed check out, as you can see below: Figure 14: Win 2008 DHCP Server has the Vista client listed under Address Leases With that, I knew that I had a working configuration and we are done!

Read the article

Taking the training wheels off: Accelerating the Business with Oracle IAM by Brian Mozinski (Accenture)

- by Greg Jensen

Today, technical requirements for IAM are evolving rapidly, and the bar is continuously raised for high performance IAM solutions as organizations look to roll out high volume use cases on the back of legacy systems. Existing solutions were often designed and architected to support offline transactions and manual processes, and the business owners today demand globally scalable infrastructure to support the growth their business cases are expected to deliver. To help IAM practitioners address these challenges and make their organizations and themselves more successful, this series we will outline the: • Taking the training wheels off: Accelerating the Business with Oracle IAM The explosive growth in expectations for IAM infrastructure, and the business cases they support to gain investment in new security programs. • "Necessity is the mother of invention": Technical solutions developed in the field Well proven tricks of the trade, used by IAM guru’s to maximize your solution while addressing the requirements of global organizations. • The Art & Science of Performance Tuning of Oracle IAM 11gR2 Real world examples of performance tuning with Oracle IAM • No Where to go but up: Extending the benefits of accelerated IAM Anything is possible, compelling new solutions organizations are unlocking with accelerated Oracle IAM Let’s get started … by talking about the changing dynamics driving these discussions. Big Companies are getting bigger everyday, and increasingly organizations operate across state lines, multiple times zones, and in many countries or continents at the same time. No longer is midnight to 6am a safe time to take down the system for upgrades, to run recon’s and import or update user accounts and attributes. Further IT organizations are operating as shared services with SLA’s similar to telephone carrier levels expected by their “clients”. Workers are moved in and out of roles on a weekly, daily, or even hourly rate and IAM is expected to support those rapid changes. End users registering for services during business hours in Singapore are expected their access to be green-lighted in custom apps hosted in Portugal within the hour. Many of the expectations of asynchronous systems and batched updates are not adequate and the number and types of users is growing. When organizations acted more like independent teams at functional or geographic levels it was manageable to have processes that relied on a handful of people who knew how to make things work …. Knew how to get you access to the key systems to get your job done. Today everyone is expected to do more with less, the finance administrator previously supporting their local Atlanta sales office might now be asked to help close the books for the Johannesburg team, and access certification process once completed monthly by Joan on the 3rd floor is now done by a shared pool of resources in Sao Paulo. Fragmented processes that rely on institutional knowledge to get access to systems and get work done quickly break down in these scenarios. Highly robust processes that have automated workflows for connected or disconnected systems give organizations the dynamic flexibility to share work across these lines and cut costs or increase productivity. As the IT industry computing paradigms continue to change with the passing of time, and as mature or proven approaches become clear, it is normal for organizations to adjust accordingly. Businesses must manage identity in an increasingly hybrid world in which legacy on-premises IAM infrastructures are extended or replaced to support more and more interconnected and interdependent services to a wider range of users. The old legacy IAM implementation models we had relied on to manage identities no longer apply. End users expect to self-request access to services from their tablet, get supervisor approval over mobile devices and email, and launch the application even if is hosted on the cloud, or run by a partner, vendor, or service provider. While user expectations are higher, they are also simpler … logging into custom desktop apps to request approvals, or going through email or paper based processes for certification is unacceptable. Users expect security to operate within the paradigm of the application … i.e. feel like the application they are using. Citizen and customer facing applications have evolved from every where, with custom applications, 3rd party tools, and merging in from acquired entities or 3rd party OEM’s resold to expand your portfolio of services. These all have their own user stores, authentication models, user lifecycles, session management, etc. Often the designers/developers are no longer accessible and the documentation is limited. Bringing together underlying directories to scale for growth, and improve user experience is critical for revenue … but also for operations. Job functions are more dynamic.... take the Olympics for example. Endless organizations from corporations broadcasting, endorsing, or marketing through the event … to non-profit athletic foundations and public/government entities for athletes and public safety, all operate simultaneously on the world stage. Each organization needs to spin up short-term teams, often dealing with proprietary information from hot ads to racing strategies or security plans. IAM is expected to enable team’s to spin up, enable new applications, protect privacy, and secure critical infrastructure. Then it needs to be disabled just as quickly as users go back to their previous responsibilities. On a more technical level … Optimized system directory; tuning guidelines and parameters are needed by businesses today. Business’s need to be making the right choices (virtual directories) and considerations via choosing the correct architectural patterns (virtual, direct, replicated, and tuning), challenge is that business need to assess and chose the correct architectural patters (centralized, virtualized, and distributed) Today's Business organizations have very complex heterogeneous enterprises that contain diverse and multifaceted information. With today's ever changing global landscape, the strategic end goal in challenging times for business is business agility. The business of identity management requires enterprise's to be more agile and more responsive than ever before. The continued proliferation of networking devices (PC, tablet, PDA's, notebooks, etc.) has caused the number of devices and users to be granted access to these devices to grow exponentially. Business needs to deploy an IAM system that can account for the demands for authentication and authorizations to these devices. Increased innovation is forcing business and organizations to centralize their identity management services. Access management needs to handle traditional web based access as well as handle new innovations around mobile, as well as address insufficient governance processes which can lead to rouge identity accounts, which can then become a source of vulnerabilities within a business’s identity platform. Risk based decisions are providing challenges to business, for an adaptive risk model to make proper access decisions via standard Web single sign on for internal and external customers,. Organizations have to move beyond simple login and passwords to address trusted relationship questions such as: Is this a trusted customer, client, or citizen? Is this a trusted employee, vendor, or partner? Is this a trusted device? Without a solid technological foundation, organizational performance, collaboration, constituent services, or any other organizational processes will languish. A Single server location presents not only network concerns for distributed user base, but identity challenges. The network risks are centered on latency of the long trip that the traffic has to take. Other risks are a performance around availability and if the single identity server is lost, all access is lost. As you can see, there are many reasons why performance tuning IAM will have a substantial impact on the success of your organization. In our next installment in the series we roll up our sleeves and get into detailed tuning techniques used everyday by thought leaders in the field implementing Oracle Identity & Access Management Solutions.

Read the article

C#: Does an IDisposable in a Halted Iterator Dispose?

- by James Michael Hare

If that sounds confusing, let me give you an example. Let's say you expose a method to read a database of products, and instead of returning a List<Product> you return an IEnumerable<Product> in iterator form (yield return). This accomplishes several good things: The IDataReader is not passed out of the Data Access Layer which prevents abstraction leak and resource leak potentials. You don't need to construct a full List<Product> in memory (which could be very big) if you just want to forward iterate once. If you only want to consume up to a certain point in the list, you won't incur the database cost of looking up the other items. This could give us an example like: 1: // a sample data access object class to do standard CRUD operations. 2: public class ProductDao 3: { 4: private DbProviderFactory _factory = SqlClientFactory.Instance 5: 6: // a method that would retrieve all available products 7: public IEnumerable<Product> GetAvailableProducts() 8: { 9: // must create the connection 10: using (var con = _factory.CreateConnection()) 11: { 12: con.ConnectionString = _productsConnectionString; 13: con.Open(); 14: 15: // create the command 16: using (var cmd = _factory.CreateCommand()) 17: { 18: cmd.Connection = con; 19: cmd.CommandText = _getAllProductsStoredProc; 20: cmd.CommandType = CommandType.StoredProcedure; 21: 22: // get a reader and pass back all results 23: using (var reader = cmd.ExecuteReader()) 24: { 25: while(reader.Read()) 26: { 27: yield return new Product 28: { 29: Name = reader["product_name"].ToString(), 30: ... 31: }; 32: } 33: } 34: } 35: } 36: } 37: } The database details themselves are irrelevant. I will say, though, that I'm a big fan of using the System.Data.Common classes instead of your provider specific counterparts directly (SqlCommand, OracleCommand, etc). This lets you mock your data sources easily in unit testing and also allows you to swap out your provider in one line of code. In fact, one of the shared components I'm most proud of implementing was our group's DatabaseUtility library that simplifies all the database access above into one line of code in a thread-safe and provider-neutral way. I went with my own flavor instead of the EL due to the fact I didn't want to force internal company consumers to use the EL if they didn't want to, and it made it easy to allow them to mock their database for unit testing by providing a MockCommand, MockConnection, etc that followed the System.Data.Common model. One of these days I'll blog on that if anyone's interested. Regardless, you often have situations like the above where you are consuming and iterating through a resource that must be closed once you are finished iterating. For the reasons stated above, I didn't want to return IDataReader (that would force them to remember to Dispose it), and I didn't want to return List<Product> (that would force them to hold all products in memory) -- but the first time I wrote this, I was worried. What if you never consume the last item and exit the loop? Are the reader, command, and connection all disposed correctly? Of course, I was 99.999999% sure the creators of C# had already thought of this and taken care of it, but inspection in Reflector was difficult due to the nature of the state machines yield return generates, so I decided to try a quick example program to verify whether or not Dispose() will be called when an iterator is broken from outside the iterator itself -- i.e. before the iterator reports there are no more items. So I wrote a quick Sequencer class with a Dispose() method and an iterator for it. Yes, it is COMPLETELY contrived: 1: // A disposable sequence of int -- yes this is completely contrived... 2: internal class Sequencer : IDisposable 3: { 4: private int _i = 0; 5: private readonly object _mutex = new object(); 6: 7: // Constructs an int sequence. 8: public Sequencer(int start) 9: { 10: _i = start; 11: } 12: 13: // Gets the next integer 14: public int GetNext() 15: { 16: lock (_mutex) 17: { 18: return _i++; 19: } 20: } 21: 22: // Dispose the sequence of integers. 23: public void Dispose() 24: { 25: // force output immediately (flush the buffer) 26: Console.WriteLine("Disposed with last sequence number of {0}!", _i); 27: Console.Out.Flush(); 28: } 29: } And then I created a generator (infinite-loop iterator) that did the using block for auto-Disposal: 1: // simply defines an extension method off of an int to start a sequence 2: public static class SequencerExtensions 3: { 4: // generates an infinite sequence starting at the specified number 5: public static IEnumerable<int> GetSequence(this int starter) 6: { 7: // note the using here, will call Dispose() when block terminated. 8: using (var seq = new Sequencer(starter)) 9: { 10: // infinite loop on this generator, means must be bounded by caller! 11: while(true) 12: { 13: yield return seq.GetNext(); 14: } 15: } 16: } 17: } This is really the same conundrum as the database problem originally posed. Here we are using iteration (yield return) over a large collection (infinite sequence of integers). If we cut the sequence short by breaking iteration, will that using block exit and hence, Dispose be called? Well, let's see: 1: // The test program class 2: public class IteratorTest 3: { 4: // The main test method. 5: public static void Main() 6: { 7: Console.WriteLine("Going to consume 10 of infinite items"); 8: Console.Out.Flush(); 9: 10: foreach(var i in 0.GetSequence()) 11: { 12: // could use TakeWhile, but wanted to output right at break... 13: if(i >= 10) 14: { 15: Console.WriteLine("Breaking now!"); 16: Console.Out.Flush(); 17: break; 18: } 19: 20: Console.WriteLine(i); 21: Console.Out.Flush(); 22: } 23: 24: Console.WriteLine("Done with loop."); 25: Console.Out.Flush(); 26: } 27: } So, what do we see? Do we see the "Disposed" message from our dispose, or did the Dispose get skipped because from an "eyeball" perspective we should be locked in that infinite generator loop? Here's the results: 1: Going to consume 10 of infinite items 2: 0 3: 1 4: 2 5: 3 6: 4 7: 5 8: 6 9: 7 10: 8 11: 9 12: Breaking now! 13: Disposed with last sequence number of 11! 14: Done with loop. Yes indeed, when we break the loop, the state machine that C# generates for yield iterate exits the iteration through the using blocks and auto-disposes the IDisposable correctly. I must admit, though, the first time I wrote one, I began to wonder and that led to this test. If you've never seen iterators before (I wrote a previous entry here) the infinite loop may throw you, but you have to keep in mind it is not a linear piece of code, that every time you hit a "yield return" it cedes control back to the state machine generated for the iterator. And this state machine, I'm happy to say, is smart enough to clean up the using blocks correctly. I suspected those wily guys and gals at Microsoft engineered it well, and I wasn't disappointed. But, I've been bitten by assumptions before, so it's good to test and see. Yes, maybe you knew it would or figured it would, but isn't it nice to know? And as those campy 80s G.I. Joe cartoon public service reminders always taught us, "Knowing is half the battle...". Technorati Tags: C#,.NET

Read the article

Silverlight for Everyone!!

- by subodhnpushpak

Someone asked me to compare Silverlight / HTML development. I realized that the question can be answered in many ways: Below is the high level comparison between a HTML /JavaScript client and Silverlight client and why silverlight was chosen over HTML / JavaScript client (based on type of users and major functionalities provided): 1. For end users Browser compatibility Silverlight is a plug-in and requires installation first. However, it does provides consistent look and feel across all browsers. For HTML / DHTML, there is a need to tweak JavaScript for each of the browser supported. In fact, tags like <span> and <div> works differently on different browser / version. So, HTML works on most of the systems but also requires lot of efforts coding-wise to adhere to all standards/ browsers / versions. Out of browser support No support in HTML. Third party tools like Google gears offers some functionalities but there are lots of issues around platform and accessibility. Out of box support for out-of-browser support. provides features like drag and drop onto application surface. Cut and copy paste in HTML HTML is displayed in browser; which, in turn provides facilities for cut copy and paste. Silverlight (specially 4) provides rich features for cut-copy-paste along with full control over what can be cut copy pasted by end users and .advanced features like visual tree printing. Rich user experience HTML can provide some rich experience by use of some JavaScript libraries like JQuery. However, extensive use of JavaScript combined with various versions of browsers and the supported JavaScript makes the solution cumbersome. Silverlight is meant for RIA experience. User data storage on client end In HTML only small amount of data can be stored that too in cookies. In Silverlight large data may be stored, that too in secure way. This increases the response time. Post back In HTML / JavaScript the post back can be stopped by use of AJAX. Extensive use of AJAX can be a bottleneck as browser stack is used for the calls. Both look and feel and data travel over network. In Silverlight everything run the client side. Calls are made to server ONLY for data; which also reduces network traffic in long run. 2. For Developers Coding effort HTML / JavaScript can take considerable amount to code if features (requirements) are rich. For AJAX like interfaces; knowledge of third party kits like DOJO / Yahoo UI / JQuery is required which has steep learning curve. ASP .Net coding world revolves mostly along <table> tags for alignments whereas most popular tools provide <div> tags; which requires lots of tweaking. AJAX calls can be a bottlenecks for performance, if the calls are many. In Silverlight; coding is in C#, which is managed code. XAML is also very intuitive and Blend can be used to provide look and feel. Event handling is much clean than in JavaScript. Provides for many clean patterns like MVVM and composable application. Each call to server is asynchronous in silverlight. AJAX is in built into silverlight. Threading can be done at the client side itself to provide for better responsiveness; etc. Debugging Debugging in HTML / JavaScript is difficult. As JavaScript is interpreted; there is NO compile time error handling. Debugging in Silverlight is very helpful. As it is compiled; it provides rich features for both compile time and run time error handling. Multi -targeting browsers HTML / JavaScript have different rendering behaviours in different browsers / and their versions. JavaScript have to be written to sublime the differences in browser behaviours. Silverlight works exactly the same in all browsers and works on almost all popular browser. Multi-targeting desktop No support in HTML / JavaScript Silverlight is very close to WPF. Bot the platform may be easily targeted while maintaining the same source code. Rich toolkit HTML /JavaScript have limited toolkit as controls Silverlight provides a rich set of controls including graphs, audio, video, layout, etc. 3. For Architects Design Patterns Silverlight provides for patterns like MVVM (MVC) and rich (fat) client architecture. This segregates the "separation of concern" very clearly. Client (silverlight) does what it is expected to do and server does what it is expected of. In HTML / JavaScript world most of the processing is done on the server side. Extensibility Silverlight provides great deal of extensibility as custom controls may be made. Extensibility is NOT restricted by browser but by the plug-in silverlight runs in. HTML / JavaScript works in a certain way and extensibility is generally done on the server side rather than client end. Client side is restricted by the limitations of the browser. Performance Silverlight provides localized storage which may be used for cached data storage. this reduces the response time. As processing can be done on client side itself; there is no need for server round trips. this decreases the round about time. Look and feel of the application is downloaded ONLY initially, afterwards ONLY data is fetched form the server. Security Silverlight is compiled code downloaded as .XAP; As compared to HTML / JavaScript, it provides more secure sandboxed approach. Cross - scripting is inherently prohibited in silverlight by default. If proper guidelines are followed silverlight provides much robust security mechanism as against HTML / JavaScript world. For example; knowing server Address in obfuscated JavaScript is easier than a compressed compiled obfuscated silverlight .XAP file. Some of these like (offline and Canvas support) will be available in HTML5. However, the timelines are not encouraging at all. According to Ian Hickson, editor of the HTML5 specification, the specification to reach the W3C Candidate Recommendation stage during 2012, and W3C Recommendation in the year 2022 or later. see http://en.wikipedia.org/wiki/HTML5 for details. The above is MY opinion. I will love to hear yours; do let me know via comments. Technorati Tags: Silverlight

Read the article

Try a sample: Using the counter predicate for event sampling

- by extended_events

Extended Events offers a rich filtering mechanism, called predicates, that allows you to reduce the number of events you collect by specifying criteria that will be applied during event collection. (You can find more information about predicates in Using SQL Server 2008 Extended Events (by Jonathan Kehayias)) By evaluating predicates early in the event firing sequence we can reduce the performance impact of collecting events by stopping event collection when the criteria are not met. You can specify predicates on both event fields and on a special object called a predicate source. Predicate sources are similar to action in that they typically are related to some type of global information available from the server. You will find that many of the actions available in Extended Events have equivalent predicate sources, but actions and predicates sources are not the same thing. Applying predicates, whether on a field or predicate source, is very similar to what you are used to in T-SQL in terms of how they work; you pick some field/source and compare it to a value, for example, session_id = 52. There is one predicate source that merits special attention though, not just for its special use, but for how the order of predicate evaluation impacts the behavior you see. I’m referring to the counter predicate source. The counter predicate source gives you a way to sample a subset of events that otherwise meet the criteria of the predicate; for example you could collect every other event, or only every tenth event. Simple CountingThe counter predicate source works by creating an in memory counter that increments every time the predicate statement is evaluated. Here is a simple example with my favorite event, sql_statement_completed, that only collects the second statement that is run. (OK, that’s not much of a sample, but this is for demonstration purposes. Here is the session definition: CREATE EVENT SESSION counter_test ON SERVERADD EVENT sqlserver.sql_statement_completed (ACTION (sqlserver.sql_text) WHERE package0.counter = 2)ADD TARGET package0.ring_bufferWITH (MAX_DISPATCH_LATENCY = 1 SECONDS) You can find general information about the session DDL syntax in BOL and from Pedro’s post Introduction to Extended Events. The important part here is the WHERE statement that defines that I only what the event where package0.count = 2; in other words, only the second instance of the event. Notice that I need to provide the package name along with the predicate source. You don’t need to provide the package name if you’re using event fields, only for predicate sources. Let’s say I run the following test queries: -- Run three statements to test the sessionSELECT 'This is the first statement'GOSELECT 'This is the second statement'GOSELECT 'This is the third statement';GO Once you return the event data from the ring buffer and parse the XML (see my earlier post on reading event data) you should see something like this: event_name sql_text sql_statement_completed SELECT ‘This is the second statement’ You can see that only the second statement from the test was actually collected. (Feel free to try this yourself. Check out what happens if you remove the WHERE statement from your session. Go ahead, I’ll wait.) Percentage Sampling OK, so that wasn’t particularly interesting, but you can probably see that this could be interesting, for example, lets say I need a 25% sample of the statements executed on my server for some type of QA analysis, that might be more interesting than just the second statement. All comparisons of predicates are handled using an object called a predicate comparator; the simple comparisons such as equals, greater than, etc. are mapped to the common mathematical symbols you know and love (eg. = and >), but to do the less common comparisons you will need to use the predicate comparators directly. You would probably look to the MOD operation to do this type sampling; we would too, but we don’t call it MOD, we call it divides_by_uint64. This comparator evaluates whether one number is divisible by another with no remainder. The general syntax for using a predicate comparator is pred_comp(field, value), field is always first and value is always second. So lets take a look at how the session changes to answer our new question of 25% sampling: CREATE EVENT SESSION counter_test_25 ON SERVERADD EVENT sqlserver.sql_statement_completed (ACTION (sqlserver.sql_text) WHERE package0.divides_by_uint64(package0.counter,4))ADD TARGET package0.ring_bufferWITH (MAX_DISPATCH_LATENCY = 1 SECONDS)GO Here I’ve replaced the simple equivalency check with the divides_by_uint64 comparator to check if the counter is evenly divisible by 4, which gives us back every fourth record. I’ll leave it as an exercise for the reader to test this session. Why order matters I indicated at the start of this post that order matters when it comes to the counter predicate – it does. Like most other predicate systems, Extended Events evaluates the predicate statement from left to right; as soon as the predicate statement is proven false we abandon evaluation of the remainder of the statement. The counter predicate source is only incremented when it is evaluated so whether or not the counter is incremented will depend on where it is in the predicate statement and whether a previous criteria made the predicate false or not. Here is a generic example: Pred1: (WHERE statement_1 AND package0.counter = 2)Pred2: (WHERE package0.counter = 2 AND statement_1) Let’s say I cause a number of events as follows and examine what happens to the counter predicate source. Iteration Statement Pred1 Counter Pred2 Counter A Not statement_1 0 1 B statement_1 1 2 C Not statement_1 1 3 D statement_1 2 4 As you can see, in the case of Pred1, statement_1 is evaluated first, when it fails (A & C) predicate evaluation is stopped and the counter is not incremented. With Pred2 the counter is evaluated first, so it is incremented on every iteration of the event and the remaining parts of the predicate are then evaluated. In this example, Pred1 would return an event for D while Pred2 would return an event for B. But wait, there is an interesting side-effect here; consider Pred2 if I had run my statements in the following order: Not statement_1 Not statement_1 statement_1 statement_1 In this case I would never get an event back from the system because the point at which counter=2, the rest of the predicate evaluates as false so the event is not returned. If you’re using the counter target for sampling and you’re not getting the expected events, or any events, check the order of the predicate criteria. As a general rule I’d suggest that the counter criteria should be the last element of your predicate statement since that will assure that your sampling rate will apply to the set of event records defined by the rest of your predicate. Aside: I’m interested in hearing about uses for putting the counter predicate criteria earlier in the predicate statement. If you have one, post it in a comment to share with the class. - Mike Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

Read the article

Changing an HTML Form's Target with jQuery

- by Rick Strahl

This is a question that comes up quite frequently: I have a form with several submit or link buttons and one or more of the buttons needs to open a new Window. How do I get several buttons to all post to the right window? If you're building ASP.NET forms you probably know that by default the Web Forms engine sends button clicks back to the server as a POST operation. A server form has a <form> tag which expands to this: <form method="post" action="default.aspx" id="form1"> Now you CAN change the target of the form and point it to a different window or frame, but the problem with that is that it still affects ALL submissions of the current form. If you multiple buttons/links and they need to go to different target windows/frames you can't do it easily through the <form runat="server"> tag. Although this discussion uses ASP.NET WebForms as an example, realistically this is a general HTML problem although likely more common in WebForms due to the single form metaphor it uses. In ASP.NET MVC for example you'd have more options by breaking out each button into separate forms with its own distinct target tag. However, even with that option it's not always possible to break up forms - for example if multiple targets are required but all targets require the same form data to the be posted. A common scenario here is that you might have a button (or link) that you click where you still want some server code to fire but at the end of the request you actually want to display the content in a new window. A common operation where this happens is report generation: You click a button and the server generates a report say in PDF format and you then want to display the PDF result in a new window without killing the content in the current window. Assuming you have other buttons on the same Page that need to post to base window how do you get the button click to go to a new window? Can't you just use a LinkButton or other Link Control? At first glance you might think an easy way to do this is to use an ASP.NET LinkButton to do this - after all a LinkButton creates a hyper link that CAN accept a target and it also posts back to the server, right? However, there's no Target property, although you can set the target HTML attribute easily enough. Code like this looks reasonable: <asp:LinkButton runat="server" ID="btnNewTarget" Text="New Target" target="_blank" OnClick="bnNewTarget_Click" /> But if you try this you'll find that it doesn't work. Why? Because ASP.NET creates postbacks with JavaScript code that operates on the current window/frame: <a id="btnNewTarget" target="_blank" href="javascript:__doPostBack('btnNewTarget','')">New Target</a> What happens with a target tag is that before the JavaScript actually executes a new window is opened and the focus shifts to the new window. The new window of course is empty and has no __doPostBack() function nor access to the old document. So when you click the link a new window opens but the window remains blank without content - no server postback actually occurs. Natch that idea. Setting the Form Target for a Button Control or LinkButton So, in order to send Postback link controls and buttons to another window/frame, both require that the target of the form gets changed dynamically when the button or link is clicked. Luckily this is rather easy to do however using a little bit of script code and jQuery. Imagine you have two buttons like this that should go to another window: <asp:LinkButton runat="server" ID="btnNewTarget" Text="New Target" OnClick="ClickHandler" /> <asp:Button runat="server" ID="btnButtonNewTarget" Text="New Target Button" OnClick="ClickHandler" /> ClickHandler in this case is any routine that generates the output you want to display in the new window. Generally this output will not come from the current page markup but is generated externally - like a PDF report or some report generated by another application component or tool. The output generally will be either generated by hand or something that was generated to disk to be displayed with Response.Redirect() or Response.TransmitFile() etc. Here's the dummy handler that just generates some HTML by hand and displays it: protected void ClickHandler(object sender, EventArgs e) { // Perform some operation that generates HTML or Redirects somewhere else Response.Write("Some custom output would be generated here (PDF, non-Page HTML etc.)"); // Make sure this response doesn't display the page content // Call Response.End() or Response.Redirect() Response.End(); } To route this oh so sophisticated output to an alternate window for both the LinkButton and Button Controls, you can use the following simple script code: <script type="text/javascript"> $("#btnButtonNewTarget,#btnNewTarget").click(function () { $("form").attr("target", "_blank"); }); </script> So why does this work where the target attribute did not? The difference here is that the script fires BEFORE the target is changed to the new window. When you put a target attribute on a link or form the target is changed as the very first thing before the link actually executes. IOW, the link literally executes in the new window when it's done this way. By attaching a click handler, though we're not navigating yet so all the operations the script code performs (ie. __doPostBack()) and the collection of Form variables to post to the server all occurs in the current page. By changing the target from within script code the target change fires as part of the form submission process which means it runs in the correct context of the current page. IOW - the input for the POST is from the current page, but the output is routed to a new window/frame. Just what we want in this scenario. Voila you can dynamically route output to the appropriate window.© Rick Strahl, West Wind Technologies, 2005-2011Posted in ASP.NET HTML jQuery

Read the article

My Code Kata–A Solution Kata

- by Glav

There are many developers and coders out there who like to do code Kata’s to keep their coding ability up to scratch and to practice their skills. I think it is a good idea. While I like the concept, I find them dead boring and of minimal purpose. Yes, they serve to hone your skills but that’s about it. They are often quite abstract, in that they usually focus on a small problem set requiring specific solutions. It is fair enough as that is how they are designed but again, I find them quite boring. What I personally like to do is go for something a little larger and a little more fun. It takes a little more time and is not as easily executed as a kata though, but it services the same purposes from a practice perspective and allows me to continue to solve some problems that are not directly part of the initial goal. This means I can cover a broader learning range and have a bit more fun. If I am lucky, sometimes they even end up being useful tools. With that in mind, I thought I’d share my current ‘kata’. It is not really a code kata as it is too big. I prefer to think of it as a ‘solution kata’. The code is on bitbucket here. What I wanted to do was create a kind of simplistic virtual world where I can create a player, or a class, stuff it into the world, and see if it survives, and can navigate its way to the exit. Requirements were pretty simple: Must be able to define a map to describe the world using simple X,Y co-ordinates. Z co-ordinates as well if you feel like getting clever. Should have the concept of entrances, exists, solid blocks, and potentially other materials (again if you want to get clever). A coder should be able to easily write a class which will act as an inhabitant of the world. An inhabitant will receive stimulus from the world in the form of surrounding environment and be able to make a decision on action which it passes back to the ‘world’ for processing. At a minimum, an inhabitant will have sight and speed characteristics which determine how far they can ‘see’ in the world, and how fast they can move. Coders who write a really bad ‘inhabitant’ should not adversely affect the rest of world. Should allow multiple inhabitants in the world. So that was the solution I set out to act as a practice solution and a little bit of fun. It had some interesting problems to solve and I figured, if it turned out ok, I could potentially use this as a ‘developer test’ for interviews. Ask a potential coder to write a class for an inhabitant. Show the coder the map they will navigate, but also mention that we will use their code to navigate a map they have not yet seen and a little more complex. I have been playing with solution for a short time now and have it working in basic concepts. Below is a screen shot using a very basic console visualiser that shows the map, boundaries, blocks, entrance, exit and players/inhabitants. The yellow asterisks ‘*’ are the players, green ‘O’ the entrance, purple ‘^’ the exit, maroon/browny ‘#’ are solid blocks. The players can move around at different speeds, knock into each others, and make directional movement decisions based on what they see and who is around them. It has been quite fun to write and it is also quite fun to develop different players to inject into the world. The code below shows a really simple implementation of an inhabitant that can work out what to do based on stimulus from the world. It is pretty simple and just tries to move in some direction if there is nothing blocking the path. public class TestPlayer:LivingEntity { public TestPlayer() { Name = "Beta Boy"; LifeKey = Guid.NewGuid(); } public override ActionResult DecideActionToPerform(EcoDev.Core.Common.Actions.ActionContext actionContext) { try { var action = new MovementAction(); // move forward if we can if (actionContext.Position.ForwardFacingPositions.Length > 0) { if (CheckAccessibilityOfMapBlock(actionContext.Position.ForwardFacingPositions[0])) { action.DirectionToMove = MovementDirection.Forward; return action; } } if (actionContext.Position.LeftFacingPositions.Length > 0) { if (CheckAccessibilityOfMapBlock(actionContext.Position.LeftFacingPositions[0])) { action.DirectionToMove = MovementDirection.Left; return action; } } if (actionContext.Position.RearFacingPositions.Length > 0) { if (CheckAccessibilityOfMapBlock(actionContext.Position.RearFacingPositions[0])) { action.DirectionToMove = MovementDirection.Back; return action; } } if (actionContext.Position.RightFacingPositions.Length > 0) { if (CheckAccessibilityOfMapBlock(actionContext.Position.RightFacingPositions[0])) { action.DirectionToMove = MovementDirection.Right; return action; } } return action; } catch (Exception ex) { World.WriteDebugInformation("Player: "+ Name, string.Format("Player Generated exception: {0}",ex.Message)); throw ex; } } private bool CheckAccessibilityOfMapBlock(MapBlock block) { if (block == null || block.Accessibility == MapBlockAccessibility.AllowEntry || block.Accessibility == MapBlockAccessibility.AllowExit || block.Accessibility == MapBlockAccessibility.AllowPotentialEntry) { return true; } return false; } } It is simple and it seems to work well. The world implementation itself decides the stimulus context that is passed to he inhabitant to make an action decision. All movement is carried out on separate threads and timed appropriately to be as fair as possible and to cater for additional skills such as speed, and eventually maybe stamina, strength, with actions like fighting. It is pretty fun to make up random maps and see how your inhabitant does. You can download the code from here. Along the way I have played with parallel extensions to make the compute intensive stuff spread across all cores, had to heavily factor in visibility of methods and properties so design of classes was paramount, work out movement algorithms that play fairly in the world and properly favour the players with higher abilities, as well as a host of other issues. So that is my ‘solution kata’. If I keep going with it, I may develop a web interface for it where people can upload assemblies and watch their player within a web browser visualiser and maybe even a map designer. What do you do to keep the fires burning?

Read the article

Share and Deliver BI Publisher Reports in Multiple Languages

- by kanichiro.nishida

When you share your reports with someone who speak and read in different languages you want your reports to be shown in their language, right ? Well, translating reports with BI Publisher is not only easy but also reduces the maintenance cost a lot. Many of us in the BI Publisher product development team used to work in Globalization and Multi Lingual support, which enables Oracle products and applications to be used in many different languages and countries and territories. And we have a lot of experience in this area. In fact, being a strategic reporting platform for Oracle EBS, PeopleSoft, JD Edwards, Siebel, and many other Oracle application products, our customers from all over the world are generating thousands of thousands of reports, including out-of-the-box pre-developed reports from Oracle and customer created or customized reports, in their own local language everyday as they operate and manage their business. Today, I’m going to talk about this very topic, how to translate my reports with BI Publisher 11G. Translation Grows, not the Numbers of the Reports Most of the reporting tools, regardless if it’s traditional or new, always take this translation on the back burner. They require their users to copy an original report and translate the whole thing. So when you want to support additional10 languages you will need to have 10 copies of the original. Imagine when you have 50 reports then you will end up having 500 reports (50 x 10) ! Now you need to maintain these 500 reports, whenever you need to make a change in a report you need to apply the same change to the other 10 reports. And as you imagine this is not only a nightmare for IT managements but not acceptable especially for the applications like Oracle EBS that supports over 30 languages. So first thing we did was, very simple, we separated the translation out of the report and marry it to the report only at the report generation. This means, regardless of how many languages you need to support you need to have only one report and translation files for the 10 languages, which would contain the translated letters and words. So let’s say you have 50 reports and need to support 10 languages for those reports you still have only 50 reports and each report now has 10 language translation files. Yes, translation is the one should grow as you add more languages to support, not the report itself! And second, we provide the translation files in XLIFF format, which is an international standard XML based format to exchange and maintain translation strings. So once you generate the XLIFF files for your reports with BI Publisher then you can work with any translation vendors in the world to make a mass translation or you can translate the XML files by yourself by manually updating the translatable strings presented in this text file. Lastly, we made it easier to manage the translation process starting from generating the XLIFF files to uploading the translated XLIFF files back to the BI Publisher server. You can generate, download, upload the XLIFF files from the BI Publisher’s Web interface with your browser and you can see the translated reports right away without needing to shutdown or restart your server. While the translated reports are displayed based on your language preference setting you can also specify a different language when you schedule or deliver the reports so that they can be generated in your customer’s preferred language. What Can I Translate? When it comes to translation there are three things. First, report content translation. When you receive a report you like to see the content like report title, section title, comments, annotation, table column header, and anything that are static and embedded in the report. in your preferred language. We call this Reports Content translation. Second, when you open a report online you might want to see not only the report content being translated but also the report UI, such as report name, parameter name, layout name, and anything that would help you to navigate around the reports, to be translated in your language. We call this Reports UI translation. And this separation of the Reports Content and Reports UI translation makes it very useful especially when you want to navigate through the reports in your preferred language UI but want to generate the reports in your customer’s preferred language. Imagine you are English native speaker and need to generate and send a report to your customers in China. You like to see the report name, parameter name in English so that you can comfortably navigate to the report and generate the report output, but like to see the report generated in Chinese so that the your customers in China can understand the report when they receive it. And lastly, you might want to see even the data presented in the report to be translated. For example, you might want to see product names in an Order Status report to be translated based on the report viewer’s language preference. We call this Reporting Data translation. Since this Reporting Data translation is maintained at the data source level such as Database tables along with the main data, you need to prepare the translation at the data source level first. Then, you want to make sure that your query is switched accordingly based on the language preference setting so that the translated data will be retrieved. How to Translate BI Publisher Reports? Now when it comes to ‘how to translate BI Publisher reports?’ the main focus here is about the translation for the Report Content and Report UI. And I just created this video to show you how to create and manage the translation with BI Publisher 11G. Please take a look at the clip below. In today’s business world, customers and suppliers are from all over the world regardless of the size of the company or organization. Supporting multiple languages for your reports is no longer something ‘nice to have’, it’s mandatory. BI Publisher is designed to support multi lingual reports from the beginning without any extra hidden cost of license or configuration like other reporting tools such as Crystal Reports. You can support additional languages translation at any time with the very simple steps shown in the video above. Happy translation! Please share your translation experience with us!

Read the article

Does Test Driven Development (TDD) improve Quality and Correctness? (Part 1)

- by David V. Corbin

Since the dawn of the computer age, various methodologies have been introduced to improve quality and reduce cost. In this posting, I will by sharing my experiences with Test Driven Development; both its benefits and limitations. To start this topic, we need to agree on what TDD is. The first is to define each of the three words as used in this context. Test - An item or action which measures something in some quantifiable form. Driven - The primary motivation or focus of a series of activities (process) Development - All phases of a software project/product from concept through delivery. The above are very simple definitions that result in the following: "TDD is a process where the primary focus is on measuring and quantifying all aspects of the creation of a (software) product." There are many places where TDD is used outside of software development, even though it is not known by this name. Consider the (conventional) education process that most of us grew up on. The focus was to get the best grades as measured by different tests. Many of these tests measured rote memorization and not understanding of the subject matter. The result of this that many people graduated with high scores but without "quality and correctness" in their ability to utilize the subject matter (of course, the flip side is true where certain people DID understand the material but were not very good at taking this type of test). Returning to software development, let us look at some common scenarios. While these items are generally applicable regardless of platform, language and tools; the remainder of this post will utilize Microsoft Visual Studio and Team Foundation Server (TFS) for examples. It should be realized that everyone does at least some aspect of TDD. At the most rudimentary level, getting a program to compile involves a "pass/fail" measurement (is the syntax valid) that drives their ability to proceed further (run the program). Other developers may create "Unit Tests" in the belief that having a test for every method/property of a class and good code coverage is the goal of TDD. These items may be helpful and even important, but really only address a small aspect of the overall effort. To see TDD in a bigger view, lets identify the various activities that are part of the Software Development LifeCycle. These are going to be presented in a Waterfall style for simplicity, but each item also occurs within Iterative methodologies such as Agile/Scrum. the key ones here are: Requirements Gathering Architecture Design Implementation Quality Assurance Can each of these items be subjected to a process which establishes metrics (quantified metrics) that reflect both the quality and correctness of each item? It should be clear that conventional Unit Tests do not apply to all of these items; at best they can verify that a local aspect (e.g. a Class/Method) of implementation matches the (test writers perspective of) the appropriate design document. So what can we do? For each of area, the goal is to create tests that are quantifiable and durable. The ability to quantify the measurements (beyond a simple pass/fail) is critical to tracking progress(eventually measuring the level of success that has been achieved) and for providing clear information on what items need to be addressed (along with the appropriate time to address them - in varying levels of detail) . Durability is important so that the test can be reapplied (ideally in an automated fashion) over the entire cycle. Returning for a moment back to our "education example", one must also be careful of how the tests are organized and how the measurements are taken. If a test is in a multiple choice format, there is a significant statistical probability that a correct answer might be the result of a random guess. Also, in many situations, having the student simply provide a final answer can obscure many important elements. For example, on a math test, having the student simply provide a numeric answer (rather than showing the methodology) may result in a complete mismatch between the process and the result. It is hard to determine which is worse: The student who makes a simple arithmetric error at one step of a long process (resulting in a wrong answer) or The student who (without providing the "workflow") uses a completely invalid approach, yet still comes up with the right number. The "Wrong Process"/"Right Answer" is probably the single biggest problem in software development. Even very simple items can suffer from this. As an example consider the following code for a "straight line" calculation....Is it correct? (for Integral Points) int Solve(int m, int b, int x) { return m * x + b; } Most people would respond "Yes". But let's take the question one step further... Is it correct for all possible values of m,b,x??? (no fair if you cheated by being focused on the bolded text!) Without additional information regarding constrains on "the possible values of m,b,x" the answer must be NO, there is the risk of overflow/wraparound that will produce an incorrect result! To properly answer this question (i.e. Test the Code), one MUST be able to backtrack from the implementation through the design, and architecture all the way back to the requirements. And the requirement itself must be tested against the stakeholder(s). It is only when the bounding conditions are defined that it is possible to determine if the code is "Correct" and has "Quality". Yet, how many of us (myself included) have written such code without even thinking about it. In many canses we (think we) "know" what the bounds are, and that the code will be correct. As we all know, requirements change, "code reuse" causes implementations to be applied to different scenarios, etc. This leads directly to the types of system failures that plague so many projects. This approach to TDD is much more holistic than ones which start by focusing on the details. The fundamental concepts still apply: Each item should be tested. The test should be defined/implemented before (or concurrent with) the definition/implementation of the actual item. We also add concepts that expand the scope and alter the style by recognizing: There are many things beside "lines of code" that benefit from testing (measuring/evaluating in a formal way) Correctness and Quality can not be solely measured by "correct results" In the future parts, we will examine in greater detail some of the techniques that can be applied to each of these areas....

Read the article

Creating an SMF service for mercurial web server

- by Chris W Beal

I'm working on a project at the moment, which has a number of contributers. We're managing the project gate (which is stand alone) with mercurial. We want to have an easy way of seeing the changelog, so we can show management what is going on. Luckily mercurial provides a basic web server which allows you to see the changes, and drill in to change sets. This can be run as a daemon, but as it was running on our build server, every time it was rebooted, someone needed to remember to start the process again. This is of course a classic usage of SMF. Now I'm not an experienced person at writing SMF services, so it took me 1/2 an hour or so to figure it out the first time. But going forward I should know what I'm doing a bit better. I did reference this doc extensively. Taking a step back, the command to start the mercurial web server is $ hg serve -p <port number> -d So we somehow need to get SMF to run that command for us. In the simplest form, SMF services are really made up of two components. The manifest Usually lives in /var/svc/manifest somewhere Can be imported from any location The method Usually live in /lib/svc/method I simply put the script straight in that directory. Not very repeatable, but it worked Can take an argument of start, stop, or refresh Lets start with the manifest. This looks pretty complex, but all it's doing is describing the service name, the dependencies, the start and stop methods, and some properties. The properties can be by instance, that is to say I could have multiple hg serve processes handling different mercurial projects, on different ports simultaneously Here is the manifest I wrote. I stole extensively from the examples in the Documentation. So my manifest looks like this $ cat hg-serve.xml <?xml version="1.0"?> <!DOCTYPE service_bundle SYSTEM "/usr/share/lib/xml/dtd/service_bundle.dtd.1"> <service_bundle type='manifest' name='hg-serve'> <service name='application/network/hg-serve' type='service' version='1'> <dependency name='network' grouping='require_all' restart_on='none' type='service'> <service_fmri value='svc:/milestone/network:default' /> </dependency> <exec_method type='method' name='start' exec='/lib/svc/method/hg-serve %m' timeout_seconds='2' /> <exec_method type='method' name='stop' exec=':kill' timeout_seconds='2'> </exec_method> <instance name='project-gate' enabled='true'> <method_context> <method_credential user='root' group='root' /> </method_context> <property_group name='hg-serve' type='application'> <propval name='path' type='astring' value='/src/project-gate'/> <propval name='port' type='astring' value='9998' /> </property_group> </instance> <stability value='Evolving' /> <template> <common_name> <loctext xml:lang='C'>hg-serve</loctext> </common_name> <documentation> <manpage title='hg' section='1' /> </documentation> </template> </service> </service_bundle> So the only things I had to decide on in this are the service name "application/network/hg-serve" the start and stop methods (more of which later) and the properties. This is the information I need to pass to the start method script. In my case the port I want to start the web server on "9998", and the path to the source gate "/src/project-gate". These can be read in to the start method. So now lets look at the method scripts $ cat /lib/svc/method/hg-serve #!/sbin/sh # # # Copyright (c) 2012, Oracle and/or its affiliates. All rights reserved. # # Standard prolog # . /lib/svc/share/smf_include.sh if [ -z $SMF_FMRI ]; then echo "SMF framework variables are not initialized." exit $SMF_EXIT_ERR fi # # Build the command line flags # # Get the port and directory from the SMF properties port=`svcprop -c -p hg-serve/port $SMF_FMRI` dir=`svcprop -c -p hg-serve/path $SMF_FMRI` echo "$1" case "$1" in 'start') cd $dir /usr/bin/hg serve -d -p $port ;; *) echo "Usage: $0 {start|refresh|stop}" exit 1 ;; esac exit $SMF_EXIT_OK This is all pretty self explanatory, we read the port and directory using svcprop, and use those simply to run a command in the start case. We don't need to implement a stop case, as the manifest says to use "exec=':kill'for the stop method. Now all we need to do is import the manifest and start the service, but first verify the manifest # svccfg verify /path/to/hg-serve.xml If that doesn't give an error try importing it # svccfg import /path/to/hg-serve.xml If like me you originally put the hg-serve.xml file in /var/svc/manifest somewhere you'll get an error and told to restart the import service svccfg: Restarting svc:/system/manifest-import The manifest being imported is from a standard location and should be imported with the command : svcadm restart svc:/system/manifest-import # svcadm restart svc:/system/manifest-import and you're nearly done. You can look at the service using svcs -l # svcs -l hg-serve fmri svc:/application/network/hg-serve:project-gate name hg-serve enabled false state disabled next_state none state_time Thu May 31 16:11:47 2012 logfile /var/svc/log/application-network-hg-serve:project-gate.log restarter svc:/system/svc/restarter:default contract_id 15749 manifest /var/svc/manifest/network/hg/hg-serve.xml dependency require_all/none svc:/milestone/network:default (online) And look at the interesting properties # svcprop hg-serve hg-serve/path astring /src/project-gate hg-serve/port astring 9998 ...stuff deleted.... Then simply enable the service and if every things gone right, you can point your browser at http://server:9998 and get a nice graphical log of project activity. # svcadm enable hg-serve # svcs -l hg-serve fmri svc:/application/network/hg-serve:project-gate name hg-serve enabled true state online next_state none state_time Thu May 31 16:18:11 2012 logfile /var/svc/log/application-network-hg-serve:project-gate.log restarter svc:/system/svc/restarter:default contract_id 15858 manifest /var/svc/manifest/network/hg/hg-serve.xml dependency require_all/none svc:/milestone/network:default (online) None of this is rocket science, but a bit fiddly. Hence I thought I'd blog it. It might just be you see this in google and it clicks with you more than one of the many other blogs or how tos about it. Plus I can always refer back to it myself in 3 weeks, when I want to add another project to the server, and I've forgotten how to do it.

Read the article

FTP Publishing with the new Windows Azure Release

- by Harish Ranganathan

There is a good chance you might have stumbled upon the new Windows Azure Release that we made on June 6th. Scott Guthrie’s Post quite summarizes the overall new features. One of my favorite features is the Windows Azure Websites and the ability to do publish files to Azure using your FTP Client. Windows Azure Websites offers low cost (free upto 10 websites) web hosting where you can deploy any website that can run on IIS 7.0, quickly. The earlier releases of Azure SDKs and the Azure platform support .NET 3.5 & above for running your applications. This was a constraint for many since there are/were a lot of ASP.NET 2.0 applications built over time and simply to put it on Azure, many of you were skeptical to migrate it to .NET 4. Windows Azure Websites offer the flexibility of running IIS 7.0 supported .NET Versions which means you can run .NET 1.1, 2.0, 3.5 and .NET 4. Not just that! You can also run classic ASP Applications. Windows Azure Websites don’t need you to go through the complexity of adding the Cloud Project Template and then publishing the Configuration Files. Lets take a step by step understanding of Websites and publishing using FTP. I downloaded the Club Website Starter Kit from http://www.asp.net/downloads/starter-kits/club It also requires a database and I downloaded the SQL Scripts and created a SQL Server Database called Club. This installs a Web Site Project Template. Note that I am running Windows 8 Release Preview and Visual Studio 2012 RC. After installing the template, select File – New – Website and don’t forget to choose the Framework version as .NET 2.0 You can see the “Club Website Starter Kit” . Once you select the Website gets created. You would encounter a warning indicating that the Club Website Starter Kit uses SQL Express and the recommended database is LocalDB Express. Click ok to continue. Once the Website is created open up the Web.config and locate the “ClubSiteDB” connection string. By default, it points to a SQL Express Database. Instead configure it to use your local SQL Server. Also, open up Global.asax and comment out the following line if (!Roles.RoleExists("Administrators")) Roles.CreateRole("Administrators"); There seems to be an issue in the code that doesn’t create the role. Post that, hit CTRL+F5 and you should be able to see the Website Running, as below So, now we have the Club Starter Kit site up running locally. Moving to Azure Visit http://manage.windowsazure.com/ and sign up for a trial account. This allows you to host up to 10 websites for free and a host of other benefits. The free Websites can be extended to an year without any charge. Once you have signed up, sign in to the portal using the Live ID used for sign up. After signing in, you would be presented with the “All Items” listing page which lists, Websites, Cloud Services, Databases etc., If this is the first time, you wouldn’t find anything. Click on the “Websites” link from the left menu. Click on “New” in the bottom and it should show up a dialog. In the same, select Website and click on “Quick Create” and in the URL Textbox, specify “MyFirstDemo” and click the “Create Web Site” link below. It should take a few seconds to create the Website. Once the Website is created, click on the listing and it should open up the Dashboard. Since we haven’t done anything yet, there shouldn’t be any statistics Click on the “Download publish profile” link in the right bottom. This file has the FTP publishing settings. Also, if you scroll down you can see the FTP URL for this site. It should typically start ftp://waws-xxxx-xxx-xxxx In the downloaded publish profile file, you can also find the ftp URL. Pick the following from this file publishUrl (the 2nd one, the one that features after publishMethod =”FTP”) and the userName and userPWD that follows. Note that we have everything required to publish the files. But since the Club Starter Kit uses Databases, we need to have the Database running on SQL Azure. Go back to the Main Menu and click on “New” in the bottom but this time select “SQL Database” and provide “Club” as Database name for “Quick Create” If this is the first time a Server would be created. Otherwise, it would pickup the existing server name. Once the database is created, you can use the SQL Azure Migration Wizard http://sqlazuremw.codeplex.com/ and provide the credentials to connect to local database and then the SQL Azure database for migrating the “Club” database. The migration wizard UI hasn’t changed much and is the same as explained by me in one my posts earlier http://geekswithblogs.net/ranganh/archive/2009/09/29/taking-your-northwind-database-to-sql-azure-and-binding-it.aspx Once the database is migrated, come back to the main screen and click on the Database base in the Azure Management Portal. It opens up the dashboard of the database. Click on “Show connection Strings” and it would popup a list of connection string formats. Choose the ADO.NET connection string and after editing the password with the password that you provided when creating the database server in the Azure Portal, paste it into the config file of the Club Starter Kit Website. Just to reiterate, the connection string key is ClubSiteDB. Try running the Website once to ensure that the application though running locally could connect to the SQL Database running on Azure. Once you are able to run the website successfully, we are all set to do the FTP Publishing. Download your favorite FTP tool. I use http://filezilla-project.org/ In the Host Textbox, paste the FTP URL that you picked up from the publish profile file and also paste the username and password. Click on “QuickConnect”. If everything is fine, you should be able to connect to the remote server. If it is successfully connected, you can see the wwwroot folder of the Website, running in Azure Make sure on the “Local Site” in the left, you choose the path to the folder of your Website. Open up the Website folder on the left such that it lists all the files and folders inside. Select all of them and click select “Upload” or simply drag and drop all the files to the root folder that is listed above. Once the publishing is done, you should be able to hit the SiteURL that you can find the dashboard page of the website. In our case, it would be http://MyFirstDemo.azurewebsites.net That’s it, we have now done FTP publishing in Azure and that too we are running a .NET 2.0 Website on Azure. Cheers !!!

Read the article

Oracle's Global Single Schema

- by david.butler(at)oracle.com

Maximizing business process efficiencies in a heterogeneous environment is very difficult. The difficulty stems from the fact that the various applications across the Information Technology (IT) landscape employ different integration standards, different message passing strategies, and different workflow engines. Vendors such as Oracle and others are delivering tools to help IT organizations manage the complexities introduced by these differences. But the one remaining intractable problem impacting efficient operations is the fact that these applications have different definitions for the same business data. Business data is your business information codified for computer programs to use. A good data model will represent the way your organization does business. The computer applications your organization deploys to improve operational efficiency are built to operate on the business data organized into this schema. If the schema does not represent how you do business, the applications on that schema cannot provide the features you need to achieve the desired efficiencies. Business processes span these applications. Data problems break these processes rendering them far less efficient than they need to be to achieve organization goals. Thus, the expected return on the investment in these applications is never realized. The success of all business processes depends on the availability of accurate master data. Clearly, the solution to this problem is to consolidate all the master data an organization uses to run its business. Then clean it up, augment it, govern it, and connect it back to the applications that need it. Until now, this obvious solution has been difficult to achieve because no one had defined a data model sufficiently broad, deep and flexible enough to support transaction processing on all key business entities and serve as a master superset to all other operational data models deployed in heterogeneous IT environments. Today, the situation has changed. Oracle has created an operational data model (aka schema) that can support accurate and consistent master data across heterogeneous IT systems. This is foundational for providing a way to consolidate and integrate master data without having to replace investments in existing applications. This Global Single Schema (GSS) represents a revolutionary breakthrough that allows for true master data consolidation. Oracle has deep knowledge of applications dating back to the early 1990s. It developed applications in the areas of Supply Chain Management (SCM), Product Lifecycle Management (PLM), Enterprise Resource Planning (ERP), Customer Relationship Management (CRM), Human Capital Management (HCM), Financials and Manufacturing. In addition, Oracle applications were delivered for key industries such as Communications, Financial Services, Retail, Public Sector, High Tech Manufacturing (HTM) and more. Expertise in all these areas drove requirements for GSS. The following figure illustrates Oracle's unique position that enabled the creation of the Global Single Schema. GSS Requirements Gathering GSS defines all the key business entities and attributes including Customers, Contacts, Suppliers, Accounts, Products, Services, Materials, Employees, Installed Base, Sites, Assets, and Inventory to name just a few. In addition, Oracle delivers GSS pre-integrated with a wide variety of operational applications. Business Process Automation EBusiness is about maximizing operational efficiency. At the highest level, these 'operations' span all that you do as an organization. The following figure illustrates some of these high-level business processes. Enterprise Business Processes Supplies are procured. Assets are maintained. Materials are stored. Inventory is accumulated. Products and Services are engineered, produced and sold. Customers are serviced. And across this entire spectrum, Employees do the procuring, supporting, engineering, producing, selling and servicing. Not shown, but not to be overlooked, are the accounting and the financial processes associated with all this procuring, manufacturing, and selling activity. Supporting all these applications is the master data. When this data is fragmented and inconsistent, the business processes fail and inefficiencies multiply. But imagine having all the data under these operational business processes in one place. · The same accurate and timely customer data will be provided to all your operational applications from the call center to the point of sale. · The same accurate and timely supplier data will be provided to all your operational applications from supply chain planning to procurement. · The same accurate and timely product information will be available to all your operational applications from demand chain planning to marketing. You would have a single version of the truth about your assets, financial information, customers, suppliers, employees, products and services to support your business automation processes as they flow across your business applications. All company and partner personnel will access the same exact data entity across all your channels and across all your lines of business. Oracle's Global Single Schema enables this vision of a single version of the truth across the heterogeneous operational applications supporting the entire enterprise. Global Single Schema Oracle's Global Single Schema organizes hundreds of thousands of attributes into 165 major schema objects supporting over 180 business application modules. It is designed for international operations, and extensibility. The schema is delivered with a full set of public Application Programming Interfaces (APIs) and an Integration Repository with modern Service Oriented Architecture interfaces to make data available as a services (DaaS) to business processes and enable operations in heterogeneous IT environments. · Key tables can be extended with unlimited numbers of additional attributes and attribute groups for maximum flexibility. o This enables model extensions that reflect business entities unique to your organization's operations. · The schema is multi-organization enabled so data manipulation can be controlled along organizational boundaries. · It uses variable byte Unicode to support over 31 languages. · The schema encodes flexible date and flexible address formats for easy localizations. No matter how complex your business is, Oracle's Global Single Schema can hold your business objects and support your global operations. Oracle's Global Single Schema identifies and defines the business objects an enterprise needs within the context of its business operations. The interrelationships between the business objects are also contained within the GSS data model. Their presence expresses fundamental business rules for the interaction between business entities. The following figure illustrates some of these connections. Interconnected Business Entities Interconnecte business processes require interconnected business data. No other MDM vendor has this capability. Everyone else has either one entity they can master or separate disconnected models for various business entities. Higher level integrations are made available, but that is a weak architectural alternative to data level integration in this critically important aspect of Master Data Management.

Read the article

Beginner’s Guide to Flock, the Social Media Browser

- by Asian Angel

Are you wanting a browser that can work as a social hub from the first moment that you start it up? If you love the idea of a browser that is ready to go out of the box then join us as we look at Flock. During the Install Process When you are installing Flock there are two install windows that you should watch for. The first one lets you choose between the “Express Setup & Custom Setup”. We recommend the “Custom Setup”. Once you have selected the “Custom Setup” you can choose which of the following options will enabled. Notice the “anonymous usage statistics” option at the bottom…you can choose to leave this enabled or disable it based on your comfort level. The First Look When you start Flock up for the first time it will open with three tabs. All three are of interest…especially if this is your first time using Flock. With the first tab you can jump right into “logging in/activating” favorite social services within Flock. This page is set to display each time that you open Flock unless you deselect the option in the lower left corner. The second tab provides a very nice overview of Flock and its’ built-in social management power. The third and final page can be considered a “Personal Page”. You can make some changes to the content displayed for quick and easy access and/or monitoring “Twitter Search, Favorite Feeds, Favorite Media, Friend Activity, & Favorite Sites”. Use the “Widget Menu” in the upper left corner to select the “Personal Page Components” that you would like to use. In the upper right corner there is a built-in “Search Bar” and buttons for “Posting to Your Blog & Uploading Media”. To help personalize the “My World Page” just a bit more you can even change the text to your name or whatever best suits your needs. The Flock Toolbar The “Flock Toolbar” is full of social account management goodness. In order from left to right the buttons are: My World (Homepage), Open People Sidebar, Open Media Bar, Open Feeds Sidebar, Webmail, Open Favorites Sidebar, Open Accounts and Services Sidebar, Open Web Clipboard Sidebar, Open Blog Editor, & Open Photo Uploader. The buttons will be “highlighted” with a blue background to help indicate which area you are in. The first area will display a listing of people that you are watching/following at the services shown here. Clicking on the “Media Bar Button” will display the following “Media Slider Bar” above your “Tab Bar”. Notice that there is a built-in “Search Bar” on the right side. Any photos, etc. clicked on will be opened in the currently focused tab below the “Media Bar”. Here is a listing of the “Media Streams” available for viewing. By default Flock will come with a small selection of pre-subscribed RSS Feeds. You can easily unsubscribe, rearrange, add custom folders, or non-categorized feeds as desired. RSS Feeds subscribed to here can be viewed combined together as a single feed (clickable links) in the “My World Page”. or can be viewed individually in a new tab. Very nice! Next on the “Flock Toolbar is the “Webmail Button”. You can set up access to your favorite “Yahoo!, Gmail, & AOL Mail” accounts from here. The “Favorites Sidebar” combines your “Browser History & Bookmarks” into one convenient location. The “Accounts and Services Sidebar” gives you quick and easy access to get logged into your favorite social accounts. Clicking on any of the links will open that particular service’s login page in a new tab. Want to store items such as photos, links, and text to add into a blog post or tweet later on? Just drag and drop them into the “Web Clipboard Sidebar” for later access. Clicking on the “Blog Editor Button” will open up a separate blogging window to compose your posts in. If you have not logged into or set up an account yet in Flock you will see the following message window. The “Blogging Window”…nice, simple, and straightforward. If you are not already logged into your photo account(s) then you will see the following message window when you click on the “Photo Uploader Button”. Clicking “OK” will open the “Accounts and Services Sidebar” with compatible photo services highlighted in a light yellow color. Log in to your favorite service to start uploading all those great images. After Setting Up Here is what our browser looked like after setting up some of our favorite services. The Twitter feed is certainly looking nice and easy to read through… Some tweaking in the “RSS Feeds Sidebar” makes for a perfect reading experience. Keeping up with our e-mail is certainly easy to do too. A look back at the “Accounts and Services Sidebar” shows that all of our accounts are actively logged in (green dot on the right side). Going back to our “My World Page” you can see how nice everything looks for monitoring our “Friend Activity & Favorite Feeds”. Moving on to regular browsing everything is looking very good… Flock is a perfect choice for anyone wanting a browser and social hub all built into a single app. Conclusion Anyone who loves keeping up with their favorite social services while browsing will find using Flock to be a wonderful experience. You literally get the best of both worlds with this browser. Links Download Flock The Official Flock Extensions Homepage The Official Flock Toolbar Homepage Similar Articles Productive Geek Tips Add Color Coding to Windows 7 Media Center Program GuideAdd Social Bookmarking (Digg This!) Links to your Wordpress BlogHow to use an ISO image on Ubuntu LinuxAdvertise on How-To GeekFixing When Windows Media Player Library Won’t Let You Add Files TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Have Fun Editing Photo Editing with Citrify Outlook Connector Upgrade Error Gadfly is a cool Twitter/Silverlight app Enable DreamScene in Windows 7 Microsoft’s “How Do I ?” Videos Home Networks – How do they look like & the problems they cause

Read the article

Partner Blog Series: PwC Perspectives - "Is It Time for an Upgrade?"

- by Tanu Sood

Is your organization debating their next step with regard to Identity Management? While all the stakeholders are well aware that the one-size-fits-all doesn’t apply to identity management, just as true is the fact that no two identity management implementations are alike. Oracle’s recent release of Identity Governance Suite 11g Release 2 has innovative features such as a customizable user interface, shopping cart style request catalog and more. However, only a close look at the use cases can help you determine if and when an upgrade to the latest R2 release makes sense for your organization. This post will describe a few of the situations that PwC has helped our clients work through. “Should I be considering an upgrade?” If your organization has an existing identity management implementation, the questions below are a good start to assessing your current solution to see if you need to begin planning for an upgrade: Does the current solution scale and meet your projected identity management needs? Does the current solution have a customer-friendly user interface? Are you completely meeting your compliance objectives? Are you still using spreadsheets? Does the current solution have the features you need? Is your total cost of ownership in line with well-performing similar sized companies in your industry? Can your organization support your existing Identity solution? Is your current product based solution well positioned to support your organization's tactical and strategic direction? Existing Oracle IDM Customers: Several existing Oracle clients are looking to move to R2 in 2013. If your organization is on Sun Identity Manager (SIM) or Oracle Identity Manager (OIM) and if your current assessment suggests that you need to upgrade, you should strongly consider OIM 11gR2. Oracle provides upgrade paths to Oracle Identity Manager 11gR2 from SIM 7.x / 8.x as well as Oracle Identity Manager 10g / 11gR1. The following are some of the considerations for migration: Check the end of product support (for Sun or legacy OIM) schedule There are several new features available in R2 (including common Helpdesk scenarios, profiling of disconnected applications, increased scalability, custom connectors, browser-based UI configurations, portability of configurations during future upgrades, etc) Cost of ownership (for SIM customers)\ Customizations that need to be maintained during the upgrade Time/Cost to migrate now vs. waiting for next version If you are already on an older version of Oracle Identity Manager and actively maintaining your support contract with Oracle, you might be eligible for a free upgrade to OIM 11gR2. Check with your Oracle sales rep for more details. Existing IDM infrastructure in place: In the past year and half, we have seen a surge in IDM upgrades from non-Oracle infrastructure to Oracle. If your organization is looking to improve the end-user experience related to identity management functions, the shopping cart style access request model and browser based personalization features may come in handy. Additionally, organizations that have a large number of applications that include ecommerce, LDAP stores, databases, UNIX systems, mainframes as well as a high frequency of user identity changes and access requests will value the high scalability of the OIM reconciliation and provisioning engine. Furthermore, we have seen our clients like OIM's out of the box (OOB) support for multiple authoritative sources. For organizations looking to integrate applications that do not have an exposed API, the Generic Technology Connector framework supported by OIM will be helpful in quickly generating custom connector using OOB wizard. Similarly, organizations in need of not only flexible on-boarding of disconnected applications but also strict access management to these applications using approval flows will find the flexible disconnected application profiling feature an extremely useful tool that provides a high degree of time savings. Organizations looking to develop custom connectors for home grown or industry specific applications will likewise find that the Identity Connector Framework support in OIM allows them to build and test a custom connector independently before integrating it with OIM. Lastly, most of our clients considering an upgrade to OIM 11gR2 have also expressed interest in the browser based configuration feature that allows an administrator to quickly customize the user interface without adding any custom code. Better yet, code customizations, if any, made to the product are portable across the future upgrades which, is viewed as a big time and money saver by most of our clients. Below are some upgrade methodologies we adopt based on client priorities and the scale of implementation. For illustration purposes, we have assumed that the client is currently on Oracle Waveset (formerly Sun Identity Manager). Integrated Deployment: The integrated deployment is typically where a client wants to split the implementation to where their current IDM is continuing to handle the front end workflows and OIM takes over the back office operations incrementally. Once all the back office operations are moved completely to OIM, the front end workflows are migrated to OIM. Parallel Deployment: This deployment is typically done where there can be a distinct line drawn between which functionality the platforms are supporting. For example the current IDM implementation is handling the password reset functionality while OIM takes over the access provisioning and RBAC functions. Cutover Deployment: A cutover deployment is typically recommended where a client has smaller less complex implementations and it makes sense to leverage the migration tools to move them over immediately. What does this mean for YOU? There are many variables to consider when making upgrade decisions. For most customers, there is no ‘easy’ button. Organizations looking to upgrade or considering a new vendor should start by doing a mapping of their requirements with product features. The recommended approach is to take stock of both the short term and long term objectives, understand product features, future roadmap, maturity and level of commitment from the R&D and build the implementation plan accordingly. As we said, in the beginning, there is no one-size-fits-all with Identity Management. So, arm yourself with the knowledge, engage in industry discussions, bring in business stakeholders and start building your implementation roadmap. In the next post we will discuss the best practices on R2 implementations. We will be covering the Do's and Don't's and share our thoughts on making implementations successful. Meet the Writers: Dharma Padala is a Director in the Advisory Security practice within PwC. He has been implementing medium to large scale Identity Management solutions across multiple industries including utility, health care, entertainment, retail and financial sectors. Dharma has 14 years of experience in delivering IT solutions out of which he has been implementing Identity Management solutions for the past 8 years. Scott MacDonald is a Director in the Advisory Security practice within PwC. He has consulted for several clients across multiple industries including financial services, health care, automotive and retail. Scott has 10 years of experience in delivering Identity Management solutions. John Misczak is a member of the Advisory Security practice within PwC. He has experience implementing multiple Identity and Access Management solutions, specializing in Oracle Identity Manager and Business Process Engineering Language (BPEL). Praveen Krishna is a Manager in the Advisory Security practice within PwC. Over the last decade Praveen has helped clients plan, architect and implement Oracle identity solutions across diverse industries. His experience includes delivering security across diverse topics like network, infrastructure, application and data where he brings a holistic point of view to problem solving. Jenny (Xiao) Zhang is a member of the Advisory Security practice within PwC. She has consulted across multiple industries including financial services, entertainment and retail. Jenny has three years of experience in delivering IT solutions out of which she has been implementing Identity Management solutions for the past one and a half years.

Read the article

Collide with rotation of the object

- by Lahiru

I'm developing a mirror for lazer beam(Ball sprite). There I'm trying to redirect the laze beam according to the ration degree of the mirror(Rectangle). How can I collide the ball to the correct angle if the colliding object is with some angle(45 deg) rather than colliding back. here is an screen shot of my work here is my code using System; using System.Collections.Generic; using System.Linq; using Microsoft.Xna.Framework; using Microsoft.Xna.Framework.Audio; using Microsoft.Xna.Framework.Content; using Microsoft.Xna.Framework.GamerServices; using Microsoft.Xna.Framework.Graphics; using Microsoft.Xna.Framework.Input; using Microsoft.Xna.Framework.Media; namespace collision { /// <summary> /// This is the main type for your game /// </summary> public class Game1 : Microsoft.Xna.Framework.Game { GraphicsDeviceManager graphics; SpriteBatch spriteBatch; Texture2D ballTexture; Rectangle ballBounds; Vector2 ballPosition; Vector2 ballVelocity; float ballSpeed = 30f; Texture2D blockTexture; Rectangle blockBounds; Vector2 blockPosition; private Vector2 origin; KeyboardState keyboardState; //Font SpriteFont Font1; Vector2 FontPos; private String displayText; public Game1() { graphics = new GraphicsDeviceManager(this); Content.RootDirectory = "Content"; } /// <summary> /// Allows the game to perform any initialization it needs to before starting to run. /// This is where it can query for any required services and load any non-graphic /// related content. Calling base.Initialize will enumerate through any components /// and initialize them as well. /// </summary> protected override void Initialize() { // TODO: Add your initialization logic here ballPosition = new Vector2(this.GraphicsDevice.Viewport.Width / 2, this.GraphicsDevice.Viewport.Height * 0.25f); blockPosition = new Vector2(this.GraphicsDevice.Viewport.Width / 2, this.GraphicsDevice.Viewport.Height /2); ballVelocity = new Vector2(0, 1); base.Initialize(); } /// <summary> /// LoadContent will be called once per game and is the place to load /// all of your content. /// </summary> protected override void LoadContent() { // Create a new SpriteBatch, which can be used to draw textures. spriteBatch = new SpriteBatch(GraphicsDevice); ballTexture = Content.Load<Texture2D>("ball"); blockTexture = Content.Load<Texture2D>("mirror"); //create rectangles based off the size of the textures ballBounds = new Rectangle((int)(ballPosition.X - ballTexture.Width / 2), (int)(ballPosition.Y - ballTexture.Height / 2), ballTexture.Width, ballTexture.Height); blockBounds = new Rectangle((int)(blockPosition.X - blockTexture.Width / 2), (int)(blockPosition.Y - blockTexture.Height / 2), blockTexture.Width, blockTexture.Height); origin.X = blockTexture.Width / 2; origin.Y = blockTexture.Height / 2; // TODO: use this.Content to load your game content here Font1 = Content.Load<SpriteFont>("SpriteFont1"); FontPos = new Vector2(graphics.GraphicsDevice.Viewport.Width - 100, 20); } /// <summary> /// UnloadContent will be called once per game and is the place to unload /// all content. /// </summary> protected override void UnloadContent() { // TODO: Unload any non ContentManager content here } /// <summary> /// Allows the game to run logic such as updating the world, /// checking for collisions, gathering input, and playing audio. /// </summary> /// <param name="gameTime">Provides a snapshot of timing values.</param> /// private float RotationAngle; float circle = MathHelper.Pi * 2; float angle; protected override void Update(GameTime gameTime) { // Allows the game to exit if (GamePad.GetState(PlayerIndex.One).Buttons.Back == ButtonState.Pressed) this.Exit(); // TODO: Add your update logic here //check for collision between the ball and the block, or if the ball is outside the bounds of the screen if (ballBounds.Intersects(blockBounds) || !GraphicsDevice.Viewport.Bounds.Contains(ballBounds)) { //we have a simple collision! //if it has hit, swap the direction of the ball, and update it's position ballVelocity = -ballVelocity; ballPosition += ballVelocity * ballSpeed; } else { //move the ball a bit ballPosition += ballVelocity * ballSpeed; } //update bounding boxes ballBounds.X = (int)ballPosition.X; ballBounds.Y = (int)ballPosition.Y; blockBounds.X = (int)blockPosition.X; blockBounds.Y = (int)blockPosition.Y; keyboardState = Keyboard.GetState(); float val = 1.568017f/90; if (keyboardState.IsKeyDown(Keys.Space)) RotationAngle = RotationAngle + (float)Math.PI; if (keyboardState.IsKeyDown(Keys.Left)) RotationAngle = RotationAngle - val; angle = (float)Math.PI / 4.0f; // 90 degrees RotationAngle = angle; // RotationAngle = RotationAngle % circle; displayText = RotationAngle.ToString(); base.Update(gameTime); } /// <summary> /// This is called when the game should draw itself. /// </summary> /// <param name="gameTime">Provides a snapshot of timing values.</param> protected override void Draw(GameTime gameTime) { GraphicsDevice.Clear(Color.CornflowerBlue); // TODO: Add your drawing code here spriteBatch.Begin(); // Find the center of the string Vector2 FontOrigin = Font1.MeasureString(displayText) / 2; spriteBatch.DrawString(Font1, displayText, FontPos, Color.White, 0, FontOrigin, 1.0f, SpriteEffects.None, 0.5f); spriteBatch.Draw(ballTexture, ballPosition, Color.White); spriteBatch.Draw(blockTexture, blockPosition,null, Color.White, RotationAngle,origin, 1.0f, SpriteEffects.None, 0f); spriteBatch.End(); base.Draw(gameTime); } } }

Read the article

PowerShell Script to Enumerate SharePoint 2010 or 2013 Permissions and Active Directory Group Membership

- by Brian T. Jackett

Originally posted on: http://geekswithblogs.net/bjackett/archive/2013/07/01/powershell-script-to-enumerate-sharepoint-2010-or-2013-permissions-and.aspx In this post I will present a script to enumerate SharePoint 2010 or 2013 permissions across the entire farm down to the site (SPWeb) level. As a bonus this script also recursively expands the membership of any Active Directory (AD) group including nested groups which you wouldn’t be able to find through the SharePoint UI. History Back in 2009 (over 4 years ago now) I published one my most read blog posts about enumerating SharePoint 2007 permissions. I finally got around to updating that script to remove deprecated APIs, supporting the SharePoint 2010 commandlets, and fixing a few bugs. There are 2 things that script did that I had to remove due to major architectural or procedural changes in the script. Indenting the XML output Ability to search for a specific user I plan to add back the ability to search for a specific user but wanted to get this version published first. As for indenting the XML that could be added but would take some effort. If there is user demand for it (let me know in the comments or email me using the contact button at top of blog) I’ll move it up in priorities. As a side note you may also notice that I’m not using the Active Directory commandlets. This was a conscious decision since not all environments have them available. Instead I’m relying on the older [ADSI] type accelerator and APIs. It does add a significant amount of code to the script but it is necessary for compatibility. Hopefully in a few years if I need to update again I can remove that legacy code. Solution Below is the script to enumerate SharePoint 2010 and 2013 permissions down to site level. You can also download it from my SkyDrive account or my posting on the TechNet Script Center Repository. SkyDrive TechNet Script Center Repository http://gallery.technet.microsoft.com/scriptcenter/Enumerate-SharePoint-2010-35976bdb 001 002 003 004 005 006 007 008 009 010 011 012 013 014 015 016 017 018 019 020 021 022 023 024 025 026 027 028 029 030 031 032 033 034 035 036 037 038 039 040 041 042 043 044 045 046 047 048 049 050 051 052 053 054 055 056 057 058 059 060 061 062 063 064 065 066 067 068 069 070 071 072 073 074 075 076 077 078 079 080 081 082 083 084 085 086 087 088 089 090 091 092 093 094 095 096 097 098 099 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 ########################################################### #DisplaySPWebApp8.ps1 # #Author: Brian T. Jackett #Last Modified Date: 2013-07-01 # #Traverse the entire web app site by site to display # hierarchy and users with permissions to site. ########################################################### function Expand-ADGroupMembership { Param ( [Parameter(Mandatory=$true, Position=0)] [string] $ADGroupName, [Parameter(Position=1)] [string] $RoleBinding ) Process { $roleBindingText = "" if(-not [string]::IsNullOrEmpty($RoleBinding)) { $roleBindingText = " RoleBindings=`"$roleBindings`"" } Write-Output "<ADGroup Name=`"$($ADGroupName)`"$roleBindingText>" $domain = $ADGroupName.substring(0, $ADGroupName.IndexOf("\") + 1) $groupName = $ADGroupName.Remove(0, $ADGroupName.IndexOf("\") + 1) #BEGIN - CODE ADAPTED FROM SCRIPT CENTER SAMPLE CODE REPOSITORY #http://www.microsoft.com/technet/scriptcenter/scripts/powershell/search/users/srch106.mspx #GET AD GROUP FROM DIRECTORY SERVICES SEARCH $strFilter = "(&(objectCategory=Group)(name="+($groupName)+"))" $objDomain = New-Object System.DirectoryServices.DirectoryEntry $objSearcher = New-Object System.DirectoryServices.DirectorySearcher $objSearcher.SearchRoot = $objDomain $objSearcher.Filter = $strFilter # specify properties to be returned $colProplist = ("name","member","objectclass") foreach ($i in $colPropList) { $catcher = $objSearcher.PropertiesToLoad.Add($i) } $colResults = $objSearcher.FindAll() #END - CODE ADAPTED FROM SCRIPT CENTER SAMPLE CODE REPOSITORY foreach ($objResult in $colResults) { if($objResult.Properties["Member"] -ne $null) { foreach ($member in $objResult.Properties["Member"]) { $indMember = [adsi] "LDAP://$member" $fullMemberName = $domain + ($indMember.Name) #if($indMember["objectclass"] # if child AD group continue down chain if(($indMember | Select-Object -ExpandProperty objectclass) -contains "group") { Expand-ADGroupMembership -ADGroupName $fullMemberName } elseif(($indMember | Select-Object -ExpandProperty objectclass) -contains "user") { Write-Output "<ADUser>$fullMemberName</ADUser>" } } } } Write-Output "</ADGroup>" } } #end Expand-ADGroupMembership # main portion of script if((Get-PSSnapin -Name microsoft.sharepoint.powershell) -eq $null) { Add-PSSnapin Microsoft.SharePoint.PowerShell } $farm = Get-SPFarm Write-Output "<Farm Guid=`"$($farm.Id)`">" $webApps = Get-SPWebApplication foreach($webApp in $webApps) { Write-Output "<WebApplication URL=`"$($webApp.URL)`" Name=`"$($webApp.Name)`">" foreach($site in $webApp.Sites) { Write-Output "<SiteCollection URL=`"$($site.URL)`">" foreach($web in $site.AllWebs) { Write-Output "<Site URL=`"$($web.URL)`">" # if site inherits permissions from parent then stop processing if($web.HasUniqueRoleAssignments -eq $false) { Write-Output "" } # else site has unique permissions else { foreach($assignment in $web.RoleAssignments) { if(-not [string]::IsNullOrEmpty($assignment.Member.Xml)) { $roleBindings = ($assignment.RoleDefinitionBindings | Select-Object -ExpandProperty name) -join "," # check if assignment is SharePoint Group if($assignment.Member.XML.StartsWith('<Group') -eq "True") { Write-Output "<SPGroup Name=`"$($assignment.Member.Name)`" RoleBindings=`"$roleBindings`">" foreach($SPGroupMember in $assignment.Member.Users) { # if SharePoint group member is an AD Group if($SPGroupMember.IsDomainGroup) { Expand-ADGroupMembership -ADGroupName $SPGroupMember.Name } # else SharePoint group member is an AD User else { # remove claim portion of user login #Write-Output "<ADUser>$($SPGroupMember.UserLogin.Remove(0,$SPGroupMember.UserLogin.IndexOf("|") + 1))</ADUser>" Write-Output "<ADUser>$($SPGroupMember.UserLogin)</ADUser>" } } Write-Output "</SPGroup>" } # else an indivdually listed AD group or user else { if($assignment.Member.IsDomainGroup) { Expand-ADGroupMembership -ADGroupName $assignment.Member.Name -RoleBinding $roleBindings } else { # remove claim portion of user login #Write-Output "<ADUser>$($assignment.Member.UserLogin.Remove(0,$assignment.Member.UserLogin.IndexOf("|") + 1))</ADUser>" Write-Output "<ADUser RoleBindings=`"$roleBindings`">$($assignment.Member.UserLogin)</ADUser>" } } } } } Write-Output "</Site>" $web.Dispose() } Write-Output "</SiteCollection>" $site.Dispose() } Write-Output "</WebApplication>" } Write-Output "</Farm>" The output from the script can be sent to an XML which you can then explore using the [XML] type accelerator. This lets you explore the XML structure however you see fit. See the screenshot below for an example. If you do view the XML output through a text editor (Notepad++ for me) notice the format. Below we see a SharePoint site that has a SharePoint group Demo Members with Edit permissions assigned. Demo Members has an AD group corp\developers as a member. corp\developers has a child AD group called corp\DevelopersSub with 1 AD user in that sub group. As you can see the script recursively expands the AD hierarchy. Conclusion It took me 4 years to finally update this script but I‘m happy to get this published. I was able to fix a number of errors and smooth out some rough edges. I plan to develop this into a more full fledged tool over the next year with more features and flexibility (copy permissions, search for individual user or group, optional enumerate lists / items, etc.). If you have any feedback, feature requests, or issues running it please let me know. Enjoy the script! -Frog Out

Read the article

People, Process & Engagement: WebCenter Partner Keste

- by Michael Snow

v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Within the WebCenter group here at Oracle, discussions about people, process and engagement cross over many vertical industries and products. Amidst our growing partner ecosystem, the community provides us insight into great customer use cases every day. Such is the case with our partner, Keste, who provides us a guest post on our blog today with an overview of their innovative solution for a customer in the transportation industry. Keste is an Oracle software solutions and development company headquartered in Dallas, Texas. As a Platinum member of the Oracle® PartnerNetwork, Keste designs, develops and deploys custom solutions that automate complex business processes. Seamless Customer Self-Service Experience in the Trucking Industry with Oracle WebCenter Portal Keste, Oracle Platinum Partner Customer Overview Omnitracs, Inc., a Qualcomm company provides mobility solutions for trucking fleets to companies in the transportation industry. Omnitracs’ mobility services include basic communications such as text as well as advanced monitoring services such as GPS tracking, temperature tracking of perishable goods, load tracking and weighting distribution, and many others. Customer Business Needs Already the leading provider of mobility solutions for large trucking fleets, they chose to target smaller trucking fleets as new customers. However their existing high-touch customer support method would not be a cost effective or scalable method to manage and service these smaller customers. Omnitracs needed to provide several self-service features to make customer support more scalable while keeping customer satisfaction levels high and the costs manageable. The solution also had to be very intuitive and easy to use. The systems that Omnitracs sells to these trucking customers require professional installation and smaller customers need to track and schedule the installation. Information captured in Oracle eBusiness Suite needed to be readily available for new customers to track these purchases and delivery details. Omnitracs wanted a high impact User Interface to significantly improve customer experience with the ability to integrate with EBS, provisioning systems as well as CRM systems that were already implemented. Omnitracs also wanted to build an architecture platform that could potentially be extended to other Portals. Omnitracs’ stated goal was to deliver an “eBay-like” or “Amazon-like” experience for all of their customers so that they could reach a much broader market beyond their large company customer base. Solution Overview In order to manage the increased complexity, the growing support needs of global customers and improve overall product time-to-market in a cost-effective manner, IT began to deliver a self-service model. This self service model not only transformed numerous business processes but is also allowing the business to keep up with the growing demands of the (internal and external) customers. This solution was a customer service Portal that provided self service capabilities for large and small customers alike for Activation of mobility products, managing add-on applications for the devices (much like the Apple App Store), transferring services when trucks are sold to other companies as well as deactivation all without the involvement of a call service agent or sending multiple emails to different Omnitracs contacts. This is a conceptual view of the Customer Portal showing the details of the components that make up the solution. 12.00 The portal application for transactions was entirely built using ADF 11g R2. Omnitracs’ business had a pressing requirement to have a portal available 24/7 for its customers. Since there were interactions with EBS in the back-end, the downtimes on the EBS would negate this availability. Omnitracs devised a decoupling strategy at the database side for the EBS data. The decoupling of the database was done using Oracle Data Guard and completely insulated the solution from any eBusiness Suite down time. The customer has no knowledge whether eBS is running or not. Here are two sample screenshots of the portal application built in Oracle ADF. Customer Benefits The Customer Portal not only provided the scalability to grow the business but also provided the seamless integration with other disparate applications. Some of the key benefits are: Improved Customer Experience: With a modern look and feel and a Portal that has the aspects of an App Store, the customer experience was significantly improved. Page response times went from several seconds to sub-second for all of the pages. Enabled new product launches: After successfully dominating the large fleet market, Omnitracs now has a scalable solution to sell and manage smaller fleet customers giving them a huge advantage over their nearest competitors. Dozens of new customers have been acquired via this portal through an onboarding process that now takes minutes Seamless Integrations Improves Customer Support: ADF 11gR2 allowed Omnitracs to bring a diverse list of applications into one integrated solution. This provided a seamless experience for customers to route them from Marketing focused application to a customer-oriented portal. Internally, it also allowed Sales Representatives to have an integrated flow for taking a prospect through the various steps to onboard them as a customer. Key integrations included: Unity Core Salesforce.com Merchant e-Solution for credit card Custom Omnitracs Applications like CUPS and AUTO Security utilizing OID and OVD Back end integration with EBS (Data Guard) and iQ Database Business Impact Significant business impacts were realized through the launch of customer portal. It not only allows the business to push through in underserved segments, but also reduces the time it needs to spend on customer support—allowing the business to focus more on sales and identifying the market for new products. Some of the Immediate Benefits are The entire onboarding process is now completely automated and now completes in minutes. This represents an 85% productivity improvement over their previous processes. And it was 160 times faster! With the success of this self-service solution, the business is now targeting about 3X customer growth in the next five years. This represents a tripling of their overall customer base and significant downstream revenue for the ongoing services. 90%+ improvement of customer onboarding and management process by utilizing, single sign on integration using OID/OAM solution, performance improvements and new self-service functionality Unified login for all Customers, Partners and Internal Users enables login to a common portal and seamless access to all other integrated applications targeted at the respective audience Significantly improved customer experience with a better look and feel with a more user experience focused Portal screens. Helped sales of the new product by having an easy way of ordering and activating the product. Data Guard helped increase availability of the Portal to 99%+ and make it independent of EBS downtime. This gave customers the feel of high availability of the portal application. Some of the anticipated longer term Benefits are: Platform that can be leveraged to launch any new product introduction and enable all product teams to reach new customers and new markets Easy integration with content management to allow business owners more control of the product catalog Overall reduced TCO with standardization of the Oracle platform Managed IT support cost savings through optimization of technology skills needed to support and modify this solution ------------------------------------------------------------ 12.00 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 -"/ /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-family:"Times New Roman","serif";}

Read the article

tile_static, tile_barrier, and tiled matrix multiplication with C++ AMP

- by Daniel Moth

We ended the previous post with a mechanical transformation of the C++ AMP matrix multiplication example to the tiled model and in the process introduced tiled_index and tiled_grid. This is part 2. tile_static memory You all know that in regular CPU code, static variables have the same value regardless of which thread accesses the static variable. This is in contrast with non-static local variables, where each thread has its own copy. Back to C++ AMP, the same rules apply and each thread has its own value for local variables in your lambda, whereas all threads see the same global memory, which is the data they have access to via the array and array_view. In addition, on an accelerator like the GPU, there is a programmable cache, a third kind of memory type if you'd like to think of it that way (some call it shared memory, others call it scratchpad memory). Variables stored in that memory share the same value for every thread in the same tile. So, when you use the tiled model, you can have variables where each thread in the same tile sees the same value for that variable, that threads from other tiles do not. The new storage class for local variables introduced for this purpose is called tile_static. You can only use tile_static in restrict(direct3d) functions, and only when explicitly using the tiled model. What this looks like in code should be no surprise, but here is a snippet to confirm your mental image, using a good old regular C array // each tile of threads has its own copy of locA, // shared among the threads of the tile tile_static float locA[16][16]; Note that tile_static variables are scoped and have the lifetime of the tile, and they cannot have constructors or destructors. tile_barrier In amp.h one of the types introduced is tile_barrier. You cannot construct this object yourself (although if you had one, you could use a copy constructor to create another one). So how do you get one of these? You get it, from a tiled_index object. Beyond the 4 properties returning index objects, tiled_index has another property, barrier, that returns a tile_barrier object. The tile_barrier class exposes a single member, the method wait. 15: // Given a tiled_index object named t_idx 16: t_idx.barrier.wait(); 17: // more code …in the code above, all threads in the tile will reach line 16 before a single one progresses to line 17. Note that all threads must be able to reach the barrier, i.e. if you had branchy code in such a way which meant that there is a chance that not all threads could reach line 16, then the code above would be illegal. Tiled Matrix Multiplication Example – part 2 So now that we added to our understanding the concepts of tile_static and tile_barrier, let me obfuscate rewrite the matrix multiplication code so that it takes advantage of tiling. Before you start reading this, I suggest you get a cup of your favorite non-alcoholic beverage to enjoy while you try to fully understand the code. 01: void MatrixMultiplyTiled(vector<float>& vC, const vector<float>& vA, const vector<float>& vB, int M, int N, int W) 02: { 03: static const int TS = 16; 04: array_view<const float,2> a(M, W, vA); 05: array_view<const float,2> b(W, N, vB); 06: array_view<writeonly<float>,2> c(M,N,vC); 07: parallel_for_each(c.grid.tile< TS, TS >(), 08: [=] (tiled_index< TS, TS> t_idx) restrict(direct3d) 09: { 10: int row = t_idx.local[0]; int col = t_idx.local[1]; 11: float sum = 0.0f; 12: for (int i = 0; i < W; i += TS) { 13: tile_static float locA[TS][TS], locB[TS][TS]; 14: locA[row][col] = a(t_idx.global[0], col + i); 15: locB[row][col] = b(row + i, t_idx.global[1]); 16: t_idx.barrier.wait(); 17: for (int k = 0; k < TS; k++) 18: sum += locA[row][k] * locB[k][col]; 19: t_idx.barrier.wait(); 20: } 21: c[t_idx.global] = sum; 22: }); 23: } Notice that all the code up to line 9 is the same as per the changes we made in part 1 of tiling introduction. If you squint, the body of the lambda itself preserves the original algorithm on lines 10, 11, and 17, 18, and 21. The difference being that those lines use new indexing and the tile_static arrays; the tile_static arrays are declared and initialized on the brand new lines 13-15. On those lines we copy from the global memory represented by the array_view objects (a and b), to the tile_static vanilla arrays (locA and locB) – we are copying enough to fit a tile. Because in the code that follows on line 18 we expect the data for this tile to be in the tile_static storage, we need to synchronize the threads within each tile with a barrier, which we do on line 16 (to avoid accessing uninitialized memory on line 18). We also need to synchronize the threads within a tile on line 19, again to avoid the race between lines 14, 15 (retrieving the next set of data for each tile and overwriting the previous set) and line 18 (not being done processing the previous set of data). Luckily, as part of the awesome C++ AMP debugger in Visual Studio there is an option that helps you find such races, but that is a story for another blog post another time. May I suggest reading the next section, and then coming back to re-read and walk through this code with pen and paper to really grok what is going on, if you haven't already? Cool. Why would I introduce this tiling complexity into my code? Funny you should ask that, I was just about to tell you. There is only one reason we tiled our extent, had to deal with finding a good tile size, ensure the number of threads we schedule are correctly divisible with the tile size, had to use a tiled_index instead of a normal index, and had to understand tile_barrier and to figure out where we need to use it, and double the size of our lambda in terms of lines of code: the reason is to be able to use tile_static memory. Why do we want to use tile_static memory? Because accessing tile_static memory is around 10 times faster than accessing the global memory on an accelerator like the GPU, e.g. in the code above, if you can get 150GB/second accessing data from the array_view a, you can get 1500GB/second accessing the tile_static array locA. And since by definition you are dealing with really large data sets, the savings really pay off. We have seen tiled implementations being twice as fast as their non-tiled counterparts. Now, some algorithms will not have performance benefits from tiling (and in fact may deteriorate), e.g. algorithms that require you to go only once to global memory will not benefit from tiling, since with tiling you already have to fetch the data once from global memory! Other algorithms may benefit, but you may decide that you are happy with your code being 150 times faster than the serial-version you had, and you do not need to invest to make it 250 times faster. Also algorithms with more than 3 dimensions, which C++ AMP supports in the non-tiled model, cannot be tiled. Also note that in future releases, we may invest in making the non-tiled model, which already uses tiling under the covers, go the extra step and use tile_static memory on your behalf, but it is obviously way to early to commit to anything like that, and we certainly don't do any of that today. Comments about this post by Daniel Moth welcome at the original blog.

Read the article

Disk Drive not working

- by user287681

The CD/DVD drive on my sisters' (I'm helping her shift from Win. XP (now officially deprecated by Microsoft) to Ubuntu) system. Now, it may end up being a failed attempt, all together (Almost the whole last year (when she's been on XP) the disk drive hasn't (not even powering on) been working.), I just want to make sure I've explored every remote possibility. Because I figure, "Huh, now that I've got Ubuntu running, instead of XP, that (just) might make a difference.". I have tried using the sudo lshw command in the terminal, to (seemingly) no avil, but, who knows, you might be able to make something out of it. Here's the output: kyra@kyra-Satellite-P105:~$ sudo lshw [sudo] password for kyra: kyra-satellite-p105 description: Notebook product: Satellite P105 () vendor: TOSHIBA version: PSPA0U-0TN01M serial: 96084354W width: 64 bits capabilities: smbios-2.4 dmi-2.4 vsyscall32 configuration: administrator_password=disabled boot=oem-specific chassis=notebook frontpanel_password=unknown keyboard_password=unknown power-on_password=disabled uuid=00900559-F88E-D811-82E0-00163680E992 *-core description: Motherboard product: Satellite P105 vendor: TOSHIBA physical id: 0 version: Not Applicable serial: 1234567890 *-firmware description: BIOS vendor: TOSHIBA physical id: 0 version: V4.70 date: 01/19/20092 size: 92KiB capabilities: isa pci pcmcia pnp upgrade shadowing escd cdboot acpi usb biosbootspecification *-cpu description: CPU product: Intel(R) Core(TM)2 CPU T5500 @ 1.66GHz vendor: Intel Corp. physical id: 4 bus info: cpu@0 version: Intel(R) Core(TM)2 CPU T5 slot: U2E1 size: 1667MHz capacity: 1667MHz width: 64 bits clock: 166MHz capabilities: fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx x86-64 constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 cx16 xtpr pdcm lahf_lm dtherm cpufreq *-cache:0 description: L1 cache physical id: 5 slot: L1 Cache size: 16KiB capacity: 16KiB capabilities: asynchronous internal write-back *-cache:1 description: L2 cache physical id: 6 slot: L2 Cache size: 2MiB capabilities: burst external write-back *-memory description: System Memory physical id: c slot: System board or motherboard size: 2GiB capacity: 3GiB *-bank:0 description: SODIMM DDR2 Synchronous physical id: 0 slot: M1 size: 1GiB width: 64 bits *-bank:1 description: SODIMM DDR2 Synchronous physical id: 1 slot: M2 size: 1GiB width: 64 bits *-pci description: Host bridge product: Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub vendor: Intel Corporation physical id: 100 bus info: pci@0000:00:00.0 version: 03 width: 32 bits clock: 33MHz configuration: driver=agpgart-intel resources: irq:0 *-display:0 description: VGA compatible controller product: Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 03 width: 32 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:16 memory:d0200000-d027ffff ioport:1800(size=8) memory:c0000000-cfffffff memory:d0300000-d033ffff *-display:1 UNCLAIMED description: Display controller product: Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller vendor: Intel Corporation physical id: 2.1 bus info: pci@0000:00:02.1 version: 03 width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list configuration: latency=0 resources: memory:d0280000-d02fffff *-multimedia description: Audio device product: NM10/ICH7 Family High Definition Audio Controller vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 02 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=snd_hda_intel latency=0 resources: irq:44 memory:d0340000-d0343fff *-pci:0 description: PCI bridge product: NM10/ICH7 Family PCI Express Port 1 vendor: Intel Corporation physical id: 1c bus info: pci@0000:00:1c.0 version: 02 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:40 ioport:3000(size=4096) memory:84000000-841fffff ioport:84200000(size=2097152) *-pci:1 description: PCI bridge product: NM10/ICH7 Family PCI Express Port 2 vendor: Intel Corporation physical id: 1c.1 bus info: pci@0000:00:1c.1 version: 02 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:41 ioport:4000(size=4096) memory:84400000-846fffff ioport:84700000(size=2097152) *-network description: Wireless interface product: PRO/Wireless 3945ABG [Golan] Network Connection vendor: Intel Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 02 serial: 00:13:02:d6:d2:35 width: 32 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwl3945 driverversion=3.13.0-29-generic firmware=15.32.2.9 ip=10.110.20.157 latency=0 link=yes multicast=yes wireless=IEEE 802.11abg resources: irq:43 memory:84400000-84400fff *-pci:2 description: PCI bridge product: NM10/ICH7 Family PCI Express Port 3 vendor: Intel Corporation physical id: 1c.2 bus info: pci@0000:00:1c.2 version: 02 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:42 ioport:5000(size=4096) memory:84900000-84afffff ioport:84b00000(size=2097152) *-usb:0 description: USB controller product: NM10/ICH7 Family USB UHCI Controller #1 vendor: Intel Corporation physical id: 1d bus info: pci@0000:00:1d.0 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:23 ioport:1820(size=32) *-usb:1 description: USB controller product: NM10/ICH7 Family USB UHCI Controller #2 vendor: Intel Corporation physical id: 1d.1 bus info: pci@0000:00:1d.1 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:19 ioport:1840(size=32) *-usb:2 description: USB controller product: NM10/ICH7 Family USB UHCI Controller #3 vendor: Intel Corporation physical id: 1d.2 bus info: pci@0000:00:1d.2 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:18 ioport:1860(size=32) *-usb:3 description: USB controller product: NM10/ICH7 Family USB UHCI Controller #4 vendor: Intel Corporation physical id: 1d.3 bus info: pci@0000:00:1d.3 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:16 ioport:1880(size=32) *-usb:4 description: USB controller product: NM10/ICH7 Family USB2 EHCI Controller vendor: Intel Corporation physical id: 1d.7 bus info: pci@0000:00:1d.7 version: 02 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci-pci latency=0 resources: irq:23 memory:d0544000-d05443ff *-pci:3 description: PCI bridge product: 82801 Mobile PCI Bridge vendor: Intel Corporation physical id: 1e bus info: pci@0000:00:1e.0 version: e2 width: 32 bits clock: 33MHz capabilities: pci subtractive_decode bus_master cap_list resources: ioport:2000(size=4096) memory:d0000000-d00fffff ioport:80000000(size=67108864) *-pcmcia description: CardBus bridge product: PCIxx12 Cardbus Controller vendor: Texas Instruments physical id: 4 bus info: pci@0000:0a:04.0 version: 00 width: 32 bits clock: 33MHz capabilities: pcmcia bus_master cap_list configuration: driver=yenta_cardbus latency=176 maxlatency=5 mingnt=192 resources: irq:17 memory:d0004000-d0004fff ioport:2400(size=256) ioport:2800(size=256) memory:80000000-83ffffff memory:88000000-8bffffff *-firewire description: FireWire (IEEE 1394) product: PCIxx12 OHCI Compliant IEEE 1394 Host Controller vendor: Texas Instruments physical id: 4.1 bus info: pci@0000:0a:04.1 version: 00 width: 32 bits clock: 33MHz capabilities: pm ohci bus_master cap_list configuration: driver=firewire_ohci latency=64 maxlatency=4 mingnt=3 resources: irq:17 memory:d0007000-d00077ff memory:d0000000-d0003fff *-storage description: Mass storage controller product: 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD) vendor: Texas Instruments physical id: 4.2 bus info: pci@0000:0a:04.2 version: 00 width: 32 bits clock: 33MHz capabilities: storage pm bus_master cap_list configuration: driver=tifm_7xx1 latency=64 maxlatency=4 mingnt=7 resources: irq:17 memory:d0005000-d0005fff *-generic description: SD Host controller product: PCIxx12 SDA Standard Compliant SD Host Controller vendor: Texas Instruments physical id: 4.3 bus info: pci@0000:0a:04.3 version: 00 width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list configuration: driver=sdhci-pci latency=64 maxlatency=4 mingnt=7 resources: irq:17 memory:d0007800-d00078ff *-network description: Ethernet interface product: PRO/100 VE Network Connection vendor: Intel Corporation physical id: 8 bus info: pci@0000:0a:08.0 logical name: eth0 version: 02 serial: 00:16:36:80:e9:92 size: 10Mbit/s capacity: 100Mbit/s width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=e100 driverversion=3.5.24-k2-NAPI duplex=half latency=64 link=no maxlatency=56 mingnt=8 multicast=yes port=MII speed=10Mbit/s resources: irq:20 memory:d0006000-d0006fff ioport:2000(size=64) *-isa description: ISA bridge product: 82801GBM (ICH7-M) LPC Interface Bridge vendor: Intel Corporation physical id: 1f bus info: pci@0000:00:1f.0 version: 02 width: 32 bits clock: 33MHz capabilities: isa bus_master cap_list configuration: driver=lpc_ich latency=0 resources: irq:0 *-ide description: IDE interface product: 82801GBM/GHM (ICH7-M Family) SATA Controller [IDE mode] vendor: Intel Corporation physical id: 1f.2 bus info: pci@0000:00:1f.2 version: 02 width: 32 bits clock: 66MHz capabilities: ide pm bus_master cap_list configuration: driver=ata_piix latency=0 resources: irq:19 ioport:1f0(size=8) ioport:3f6 ioport:170(size=8) ioport:376 ioport:18b0(size=16) *-serial UNCLAIMED description: SMBus product: NM10/ICH7 Family SMBus Controller vendor: Intel Corporation physical id: 1f.3 bus info: pci@0000:00:1f.3 version: 02 width: 32 bits clock: 33MHz configuration: latency=0 resources: ioport:18c0(size=32) *-scsi physical id: 1 logical name: scsi0 capabilities: emulated *-disk description: ATA Disk product: ST9250421AS vendor: Seagate physical id: 0.0.0 bus info: scsi@0:0.0.0 logical name: /dev/sda version: SD13 serial: 5TH0B2HB size: 232GiB (250GB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 sectorsize=512 signature=000d7fd5 *-volume:0 description: EXT4 volume vendor: Linux physical id: 1 bus info: scsi@0:0.0.0,1 logical name: /dev/sda1 logical name: / version: 1.0 serial: 13bb4bdd-8cc9-40e2-a490-dbe436c2a02d size: 230GiB capacity: 230GiB capabilities: primary bootable journaled extended_attributes large_files huge_files dir_nlink recover extents ext4 ext2 initialized configuration: created=2014-06-01 17:37:01 filesystem=ext4 lastmountpoint=/ modified=2014-06-01 21:15:21 mount.fstype=ext4 mount.options=rw,relatime,errors=remount-ro,data=ordered mounted=2014-06-01 21:15:21 state=mounted *-volume:1 description: Extended partition physical id: 2 bus info: scsi@0:0.0.0,2 logical name: /dev/sda2 size: 2037MiB capacity: 2037MiB capabilities: primary extended partitioned partitioned:extended *-logicalvolume description: Linux swap / Solaris partition physical id: 5 logical name: /dev/sda5 capacity: 2037MiB capabilities: nofs *-remoteaccess UNCLAIMED vendor: Intel physical id: 1 capabilities: inbound kyra@kyra-Satellite-P105:~$

Read the article

ASP.NET WebAPI Security 3: Extensible Authentication Framework

- by Your DisplayName here!

In my last post, I described the identity architecture of ASP.NET Web API. The short version was, that Web API (beta 1) does not really have an authentication system on its own, but inherits the client security context from its host. This is fine in many situations (e.g. AJAX style callbacks with an already established logon session). But there are many cases where you don’t use the containing web application for authentication, but need to do it yourself. Examples of that would be token based authentication and clients that don’t run in the context of the web application (e.g. desktop clients / mobile). Since Web API provides a nice extensibility model, it is easy to implement whatever security framework you want on top of it. My design goals were: Easy to use. Extensible. Claims-based. ..and of course, this should always behave the same, regardless of the hosting environment. In the rest of the post I am outlining some of the bits and pieces, So you know what you are dealing with, in case you want to try the code. At the very heart… is a so called message handler. This is a Web API extensibility point that gets to see (and modify if needed) all incoming and outgoing requests. Handlers run after the conversion from host to Web API, which means that handler code deals with HttpRequestMessage and HttpResponseMessage. See Pedro’s post for more information on the processing pipeline. This handler requires a configuration object for initialization. Currently this is very simple, it contains: Settings for the various authentication and credential types Settings for claims transformation Ability to block identity inheritance from host The most important part here is the credential type support, but I will come back to that later. The logic of the message handler is simple: Look at the incoming request. If the request contains an authorization header, try to authenticate the client. If this is successful, create a claims principal and populate the usual places. If not, return a 401 status code and set the Www-Authenticate header. Look at outgoing response, if the status code is 401, set the Www-Authenticate header. Credential type support Under the covers I use the WIF security token handler infrastructure to validate credentials and to turn security tokens into claims. The idea is simple: an authorization header consists of two pieces: the schema and the actual “token”. My configuration object allows to associate a security token handler with a scheme. This way you only need to implement support for a specific credential type, and map that to the incoming scheme value. The current version supports HTTP Basic Authentication as well as SAML and SWT tokens. (I needed to do some surgery on the standard security token handlers, since WIF does not directly support string-ified tokens. The next version of .NET will fix that, and the code should become simpler then). You can e.g. use this code to hook up a username/password handler to the Basic scheme (the default scheme name for Basic Authentication). config.Handler.AddBasicAuthenticationHandler( (username, password) => username == password); You simply have to provide a password validation function which could of course point back to your existing password library or e.g. membership. The following code maps a token handler for Simple Web Tokens (SWT) to the Bearer scheme (the currently favoured scheme name for OAuth2). You simply have to specify the issuer name, realm and shared signature key: config.Handler.AddSimpleWebTokenHandler( "Bearer", http://identity.thinktecture.com/trust, Constants.Realm, "Dc9Mpi3jaaaUpBQpa/4R7XtUsa3D/ALSjTVvK8IUZbg="); For certain integration scenarios it is very useful if your Web API can consume SAML tokens. This is also easily accomplishable. The following code uses the standard WIF API to configure the usual SAMLisms like issuer, audience, service certificate and certificate validation. Both SAML 1.1 and 2.0 are supported. var registry = new ConfigurationBasedIssuerNameRegistry(); registry.AddTrustedIssuer( "d1 c5 b1 25 97 d0 36 94 65 1c e2 64 fe 48 06 01 35 f7 bd db", "ADFS"); var adfsConfig = new SecurityTokenHandlerConfiguration(); adfsConfig.AudienceRestriction.AllowedAudienceUris.Add( new Uri(Constants.Realm)); adfsConfig.IssuerNameRegistry = registry; adfsConfig.CertificateValidator = X509CertificateValidator.None; // token decryption (read from configuration section) adfsConfig.ServiceTokenResolver = FederatedAuthentication.ServiceConfiguration.CreateAggregateTokenResolver(); config.Handler.AddSaml11SecurityTokenHandler("SAML", adfsConfig); Claims Transformation After successful authentication, if configured, the standard WIF ClaimsAuthenticationManager is called to run claims transformation and validation logic. This stage is used to transform the “technical” claims from the security token into application claims. You can either have a separate transformation logic, or share on e.g. with the containing web application. That’s just a matter of configuration. Adding the authentication handler to a Web API application In the spirit of Web API this is done in code, e.g. global.asax for web hosting: protected void Application_Start() { AreaRegistration.RegisterAllAreas(); ConfigureApis(GlobalConfiguration.Configuration); RegisterGlobalFilters(GlobalFilters.Filters); RegisterRoutes(RouteTable.Routes); BundleTable.Bundles.RegisterTemplateBundles(); } private void ConfigureApis(HttpConfiguration configuration) { configuration.MessageHandlers.Add( new AuthenticationHandler(ConfigureAuthentication())); } private AuthenticationConfiguration ConfigureAuthentication() { var config = new AuthenticationConfiguration { // sample claims transformation for consultants sample, comment out to see raw claims ClaimsAuthenticationManager = new ApiClaimsTransformer(), // value of the www-authenticate header, // if not set, the first scheme added to the handler collection is used DefaultAuthenticationScheme = "Basic" }; // add token handlers - see above return config; } You can find the full source code and some samples here. In the next post I will describe some of the samples in the download, and then move on to authorization. HTH

Read the article

Unable to boot Ubuntu 13.10 (nVidia GTX 770m and Intel HD 4600)

- by Raziel Gonzalez

Ever since I bought this laptop I've been trying to install Ubuntu on it. It came with W8 preinstalled. Up to this point, I've been able to boot in UEFI mode with a black screen. I can tell it's trying to use the nVidia card (there's a led on the computer, depending on the color you can tell which GPU is using) and if I press crtl+alt+F1 I can go to console mode. Taking this advantage I tried to install bumblebee and after a successful install the led that indicates which GPU is being used change, indicating that it switched to the Intel HD 4600 graphics. After the installation I tried to initiate the graphic interface (startx) with no success. Xorg.0.log shows the error: [ 3706.779] X.Org X Server 1.14.3 Release Date: 2013-09-12 [ 3706.782] X Protocol Version 11, Revision 0 [ 3706.783] Build Operating System: Linux 3.2.0-37-generic x86_64 Ubuntu [ 3706.783] Current Operating System: Linux ubuntu 3.11.0-12-generic #19-Ubuntu SMP Wed Oct 9 16:20:46 UTC 2013 x86_64 [ 3706.783] Kernel command line: BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper nomodeset -- [ 3706.785] Build Date: 15 October 2013 09:23:37AM [ 3706.786] xorg-server 2:1.14.3-3ubuntu2 (For technical support please see http://www.ubuntu.com/support) [ 3706.786] Current version of pixman: 0.30.2 [ 3706.788] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 3706.788] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 3706.791] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Nov 2 12:28:52 2013 [ 3706.792] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 3706.792] (==) No Layout section. Using the first Screen section. [ 3706.792] (==) No screen section available. Using defaults. [ 3706.792] (**) |-->Screen "Default Screen Section" (0) [ 3706.792] (**) | |-->Monitor "<default monitor>" [ 3706.792] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 3706.792] (==) Automatically adding devices [ 3706.792] (==) Automatically enabling devices [ 3706.792] (==) Automatically adding GPU devices [ 3706.792] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 3706.792] Entry deleted from font path. [ 3706.792] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist. [ 3706.792] Entry deleted from font path. [ 3706.792] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist. [ 3706.792] Entry deleted from font path. [ 3706.792] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist. [ 3706.792] Entry deleted from font path. [ 3706.792] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist. [ 3706.792] Entry deleted from font path. [ 3706.792] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/Type1, built-ins [ 3706.792] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules" [ 3706.792] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 3706.792] (II) Loader magic: 0x7ff680918d20 [ 3706.792] (II) Module ABI versions: [ 3706.792] X.Org ANSI C Emulation: 0.4 [ 3706.792] X.Org Video Driver: 14.1 [ 3706.792] X.Org XInput driver : 19.1 [ 3706.792] X.Org Server Extension : 7.0 [ 3706.793] (--) PCI:*(0:0:2:0) 8086:0416:1462:10e8 rev 6, Mem @ 0xf7400000/4194304, 0xb0000000/268435456, I/O @ 0x0000f000/64 [ 3706.793] (II) Open ACPI successful (/var/run/acpid.socket) [ 3706.794] Initializing built-in extension Generic Event Extension [ 3706.795] Initializing built-in extension SHAPE [ 3706.796] Initializing built-in extension MIT-SHM [ 3706.797] Initializing built-in extension XInputExtension [ 3706.797] Initializing built-in extension XTEST [ 3706.798] Initializing built-in extension BIG-REQUESTS [ 3706.799] Initializing built-in extension SYNC [ 3706.799] Initializing built-in extension XKEYBOARD [ 3706.800] Initializing built-in extension XC-MISC [ 3706.801] Initializing built-in extension SECURITY [ 3706.802] Initializing built-in extension XINERAMA [ 3706.802] Initializing built-in extension XFIXES [ 3706.803] Initializing built-in extension RENDER [ 3706.804] Initializing built-in extension RANDR [ 3706.804] Initializing built-in extension COMPOSITE [ 3706.805] Initializing built-in extension DAMAGE [ 3706.806] Initializing built-in extension MIT-SCREEN-SAVER [ 3706.806] Initializing built-in extension DOUBLE-BUFFER [ 3706.807] Initializing built-in extension RECORD [ 3706.807] Initializing built-in extension DPMS [ 3706.808] Initializing built-in extension X-Resource [ 3706.809] Initializing built-in extension XVideo [ 3706.809] Initializing built-in extension XVideo-MotionCompensation [ 3706.810] Initializing built-in extension SELinux [ 3706.811] Initializing built-in extension XFree86-VidModeExtension [ 3706.811] Initializing built-in extension XFree86-DGA [ 3706.812] Initializing built-in extension XFree86-DRI [ 3706.812] Initializing built-in extension DRI2 [ 3706.812] (II) "glx" will be loaded by default. [ 3706.812] (WW) "xmir" is not to be loaded by default. Skipping. [ 3706.812] (II) LoadModule: "dri2" [ 3706.812] (II) Module "dri2" already built-in [ 3706.812] (II) LoadModule: "glamoregl" [ 3706.813] (II) Loading /usr/lib/xorg/modules/libglamoregl.so [ 3706.813] (II) Module glamoregl: vendor="X.Org Foundation" [ 3706.813] compiled for 1.14.2.901, module version = 0.5.1 [ 3706.813] ABI class: X.Org ANSI C Emulation, version 0.4 [ 3706.813] (II) LoadModule: "glx" [ 3706.813] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 3706.813] (II) Module glx: vendor="X.Org Foundation" [ 3706.813] compiled for 1.14.3, module version = 1.0.0 [ 3706.813] ABI class: X.Org Server Extension, version 7.0 [ 3706.813] (==) AIGLX enabled [ 3706.814] Loading extension GLX [ 3706.814] (==) Matched intel as autoconfigured driver 0 [ 3706.814] (==) Matched vesa as autoconfigured driver 1 [ 3706.814] (==) Matched modesetting as autoconfigured driver 2 [ 3706.814] (==) Matched fbdev as autoconfigured driver 3 [ 3706.814] (==) Assigned the driver to the xf86ConfigLayout [ 3706.814] (II) LoadModule: "intel" [ 3706.814] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so [ 3706.814] (II) Module intel: vendor="X.Org Foundation" [ 3706.814] compiled for 1.14.3, module version = 2.99.904 [ 3706.814] Module class: X.Org Video Driver [ 3706.814] ABI class: X.Org Video Driver, version 14.1 [ 3706.814] (II) LoadModule: "vesa" [ 3706.814] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 3706.814] (II) Module vesa: vendor="X.Org Foundation" [ 3706.814] compiled for 1.14.1, module version = 2.3.2 [ 3706.814] Module class: X.Org Video Driver [ 3706.814] ABI class: X.Org Video Driver, version 14.1 [ 3706.814] (II) LoadModule: "modesetting" [ 3706.814] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so [ 3706.814] (II) Module modesetting: vendor="X.Org Foundation" [ 3706.814] compiled for 1.14.1, module version = 0.8.0 [ 3706.814] Module class: X.Org Video Driver [ 3706.814] ABI class: X.Org Video Driver, version 14.1 [ 3706.814] (II) LoadModule: "fbdev" [ 3706.814] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 3706.815] (II) Module fbdev: vendor="X.Org Foundation" [ 3706.815] compiled for 1.14.1, module version = 0.4.3 [ 3706.815] Module class: X.Org Video Driver [ 3706.815] ABI class: X.Org Video Driver, version 14.1 [ 3706.815] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics, HD Graphics 2000, HD Graphics 3000, HD Graphics 2500, HD Graphics 4000, HD Graphics P4000, HD Graphics 4600, HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100, HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200 [ 3706.815] (II) VESA: driver for VESA chipsets: vesa [ 3706.815] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 3706.815] (II) FBDEV: driver for framebuffer: fbdev [ 3706.815] (--) using VT number 7 [ 3706.819] (WW) Falling back to old probe method for modesetting [ 3706.819] (EE) open /dev/dri/card0: No such file or directory [ 3706.819] (WW) Falling back to old probe method for fbdev [ 3706.819] (II) Loading sub module "fbdevhw" [ 3706.819] (II) LoadModule: "fbdevhw" [ 3706.819] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so [ 3706.819] (II) Module fbdevhw: vendor="X.Org Foundation" [ 3706.819] compiled for 1.14.3, module version = 0.0.2 [ 3706.819] ABI class: X.Org Video Driver, version 14.1 [ 3706.819] (II) Loading sub module "vbe" [ 3706.819] (II) LoadModule: "vbe" [ 3706.819] (II) Loading /usr/lib/xorg/modules/libvbe.so [ 3706.819] (II) Module vbe: vendor="X.Org Foundation" [ 3706.819] compiled for 1.14.3, module version = 1.1.0 [ 3706.819] ABI class: X.Org Video Driver, version 14.1 [ 3706.819] (II) Loading sub module "int10" [ 3706.819] (II) LoadModule: "int10" [ 3706.819] (II) Loading /usr/lib/xorg/modules/libint10.so [ 3706.819] (II) Module int10: vendor="X.Org Foundation" [ 3706.819] compiled for 1.14.3, module version = 1.0.0 [ 3706.819] ABI class: X.Org Video Driver, version 14.1 [ 3706.819] (II) VESA(0): initializing int10 [ 3706.820] (EE) VESA(0): V_BIOS address 0x0 out of range [ 3706.820] (II) UnloadModule: "vesa" [ 3706.820] (II) UnloadSubModule: "int10" [ 3706.820] (II) Unloading int10 [ 3706.820] (II) UnloadSubModule: "vbe" [ 3706.820] (II) Unloading vbe [ 3706.820] (EE) Screen(s) found, but none have a usable configuration. [ 3706.820] (EE) Fatal server error: [ 3706.820] (EE) no screens found(EE) [ 3706.820] (EE) Please consult the The X.Org Foundation support at http://wiki.x.org for help. [ 3706.820] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information. [ 3706.820] (EE) [ 3706.827] (EE) Server terminated with error (1). Closing log file. I also saved the dsmeg output to see if it can be of any help. In order to be able to get to this stage I had to boot with nomodeset option and removed quiet and splash. Anyone got this same error? Any guidance? I've tried other linux distros and so far the only one that is able to boot is Opensuse 12.3 without any issues (but only when I switch to legacy mode instead of UEFI).

Read the article

Windows Phone Developer Spotlight: Nikolai Joukov

- by Lori Lalonde

Originally posted on: http://geekswithblogs.net/lorilalonde/archive/2014/06/04/windows-phone-developer-spotlight-nikolai-joukov.aspxAs part of an ongoing series, I plan to include a spotlight post on people within the community that are stars in their field and area of expertise. For my first spotlight post, I interviewed Nikolai Joukov, who is a regular attendee at my local area .NET User Group (CTTDNUG), and has also participated in many of the Mobile and Cloud workshops we have hosted over the past few years. Nikolai stood out immediately, because of his passion for developing mobile apps, his interest in continuous learning, and his drive to publish quality apps that people will find useful and entertaining. Background: Nikolai immigrated to Canada in 1995, and has been working in IT since 1997. He moved on to become an independent contractor in 2005, and has worked at various large scale organizations over the course of his career, including BMO, Enbridge, Economical Insurance, Equitable Life, Manulife and Sun Life. Nikolai is an accomplished Windows Phone and Windows Store publisher, with 11 published Windows Phone apps, and 8 published Windows Store apps. He has almost 6000 downloads and favourable reviews. Q & A with Nikolai How many years have you been developing Windows Phone apps? 2 years When did you develop your very first Windows Phone app, and what was it about? Actually, the very first app I wrote was for the Microsoft “Smart Phone” back in 2004. This phone was given to me by Microsoft during the Developers Days Conference in Toronto. It was some kind of experimental model named Smart Phone, but you had to use VB 3 to develop the applications. Needless to say, this was not very successful at that time. My app was a Stock Trades Calculator. Very primitive, but it was working for me. The phone was heavy and the battery barely lasted 4 hours. Microsoft stopped supporting it few months later and the phone stopped working shortly after, but I still have it as a souvenir. For Windows Phone, my first app was “Trip Packing Assistant”. This is a simple trip packing check list that allows you to list items by category, set required quantity of items, and mark off the item in the list when it is packed. I designed it for me and my wife Galina, since we love to travel and this program helps manage our list for us. How did you get started in Windows Phone development? I have to say thanks to our .NET User Group for introducing me to Windows Phone development. I was intrigued and decided to give it a try. In October 2012 during a 2 day training event that ObjectSharp hosted in London, I met Bruce Johnson. On his advice, I registered for Developer Movement, and it is was a good push to actually complete the apps that I started. You have a great series of travel guide apps both for Windows Phone and Windows Store. Tell us about how you came up with the idea to develop those apps and what process you went through to put it all together. Like I said earlier, my wife and I love to travel. Before I created Trip Packing Assistant, every time we were planning to travel somewhere new, Galina would spend 3-4 weeks doing research. She would create a Word document with all of the information. We didn’t want to have to carry our laptop with us all the time, so we printed out the Word document she created, and would take it with us. After we returned from the trip, we would bring back tons of pictures and materials. Then our friends started to ask us about our materials before they planned their trips to the same places we had visited. So I decided to give it a try and started making apps for Windows Phone and for Windows 8. I hope these applications will help people who are planning to travel. So, all of the pictures used in the travel apps you created were actually taken by you during these amazing trips? Yes Do you have another Windows Store/Windows Phone project in development right now? If so, can you give us a hint at what it will be about? I want to stay with travel apps for now. But this time I will try to write an app for us (Galina and I). Usually we go on the trip, then I write the apps after we have all this beautiful pictures in our hands. We are planning a trip to Rome. This app will not have the pictures, but I want to add a map with points of interest and all information that can be useful for us. Then we will go on our trip and test it on location. As well I am planning to work on my existing apps to make them better. What learning resources would you recommend for other developers that want to get started in Window Store and Windows Phone development? I would start with dev.windowsphone.com to get all tools and samples, also links to training materials. I like MVA (Microsoft Virtual Academy). Their videos are really useful and it is free. Pluralsight is good too but it is not free and I do not have a subscription anymore. Our .NET User Group meetings give good insights too. I went to all meetings and full day training events. When you start to develop your app, you need to do research for specific questions that arise during development. The Developer Portal and Nokia Developer are good resources too. Wrap Up Thanks Nikolai for participating in my first Spotlight blog post! Shown below is Nikolai’s publisher page in the Windows Phone Store and his publisher page in the Windows Store. Simply click on it to be taken to there to check out his portfolio of apps. Be sure to download his apps and try them out! They are all free! Nikolai’s Windows Phone apps Nikolai’s Windows Store Apps

Read the article

Columnstore Case Study #2: Columnstore faster than SSAS Cube at DevCon Security

- by aspiringgeek

Preamble This is the second in a series of posts documenting big wins encountered using columnstore indexes in SQL Server 2012 & 2014. Many of these can be found in my big deck along with details such as internals, best practices, caveats, etc. The purpose of sharing the case studies in this context is to provide an easy-to-consume quick-reference alternative. See also Columnstore Case Study #1: MSIT SONAR Aggregations Why Columnstore? As stated previously, If we’re looking for a subset of columns from one or a few rows, given the right indexes, SQL Server can do a superlative job of providing an answer. If we’re asking a question which by design needs to hit lots of rows—DW, reporting, aggregations, grouping, scans, etc., SQL Server has never had a good mechanism—until columnstore. Columnstore indexes were introduced in SQL Server 2012. However, they're still largely unknown. Some adoption blockers existed; yet columnstore was nonetheless a game changer for many apps. In SQL Server 2014, potential blockers have been largely removed & they're going to profoundly change the way we interact with our data. The purpose of this series is to share the performance benefits of columnstore & documenting columnstore is a compelling reason to upgrade to SQL Server 2014. The Customer DevCon Security provides home & business security services & has been in business for 135 years. I met DevCon personnel while speaking to the Utah County SQL User Group on 20 February 2012. (Thanks to TJ Belt (b|@tjaybelt) & Ben Miller (b|@DBADuck) for the invitation which serendipitously coincided with the height of ski season.) The App: DevCon Security Reporting: Optimized & Ad Hoc Queries DevCon users interrogate a SQL Server 2012 Analysis Services cube via SSRS. In addition, the SQL Server 2012 relational back end is the target of ad hoc queries; this DW back end is refreshed nightly during a brief maintenance window via conventional table partition switching. SSRS, SSAS, & MDX Conventional relational structures were unable to provide adequate performance for user interaction for the SSRS reports. An SSAS solution was implemented requiring personnel to ramp up technically, including learning enough MDX to satisfy requirements. Ad Hoc Queries Even though the fact table is relatively small—only 22 million rows & 33GB—the table was a typical DW table in terms of its width: 137 columns, any of which could be the target of ad hoc interrogation. As is common in DW reporting scenarios such as this, it is often nearly to optimize for such queries using conventional indexing. DevCon DBAs & developers attended PASS 2012 & were introduced to the marvels of columnstore in a session presented by Klaus Aschenbrenner (b|@Aschenbrenner) The Details Classic vs. columnstore before-&-after metrics are impressive. Scenario Conventional Structures Columnstore Δ SSRS via SSAS 10 - 12 seconds 1 second >10x Ad Hoc 5-7 minutes (300 - 420 seconds) 1 - 2 seconds >100x Here are two charts characterizing this data graphically. The first is a linear representation of Report Duration (in seconds) for Conventional Structures vs. Columnstore Indexes. As is so often the case when we chart such significant deltas, the linear scale doesn’t expose some the dramatically improved values corresponding to the columnstore metrics. Just to make it fair here’s the same data represented logarithmically; yet even here the values corresponding to 1 –2 seconds aren’t visible. The Wins Performance: Even prior to columnstore implementation, at 10 - 12 seconds canned report performance against the SSAS cube was tolerable. Yet the 1 second performance afterward is clearly better. As significant as that is, imagine the user experience re: ad hoc interrogation. The difference between several minutes vs. one or two seconds is a game changer, literally changing the way users interact with their data—no mental context switching, no wondering when the results will appear, no preoccupation with the spinning mind-numbing hurry-up-&-wait indicators. As we’ve commonly found elsewhere, columnstore indexes here provided performance improvements of one, two, or more orders of magnitude. Simplified Infrastructure: Because in this case a nonclustered columnstore index on a conventional DW table was faster than an Analysis Services cube, the entire SSAS infrastructure was rendered superfluous & was retired. PASS Rocks: Once again, the value of attending PASS is proven out. The trip to Charlotte combined with eager & enquiring minds let directly to this success story. Find out more about the next PASS Summit here, hosted this year in Seattle on November 4 - 7, 2014. DevCon BI Team Lead Nathan Allan provided this unsolicited feedback: “What we found was pretty awesome. It has been a game changer for us in terms of the flexibility we can offer people that would like to get to the data in different ways.” Summary For DW, reports, & other BI workloads, columnstore often provides significant performance enhancements relative to conventional indexing. I have documented here, the second in a series of reports on columnstore implementations, results from DevCon Security, a live customer production app for which performance increased by factors of from 10x to 100x for all report queries, including canned queries as well as reducing time for results for ad hoc queries from 5 - 7 minutes to 1 - 2 seconds. As a result of columnstore performance, the customer retired their SSAS infrastructure. I invite you to consider leveraging columnstore in your own environment. Let me know if you have any questions.

Read the article

The 20 Most Important Keyboard Shortcuts For Windows PCs

- by Chris Hoffman

Keyboard shortcuts are practically essential for using any type of PC. They’ll speed up almost everything you do. But long lists of keyboard shortcuts can quickly become overwhelming if you’re just getting started. This list will cover the most useful keyboard shortcuts that every Windows user should know. If you haven’t used keyboard shortcuts much, these will show you just how useful keyboard shortcuts can be. Windows Key + Search The Windows key is particularly important on Windows 8 — especially before Windows 8.1 — because it allows you to quickly return to the Start screen. On Windows 7, it opens the Start menu. Either way, you can start typing immediately after you press the Windows key to search for programs, settings, and files. For example, if you want to launch Firefox, you can press the Windows key, start typing the word Firefox, and press Enter when the Firefox shortcut appears. It’s a quick way to launch programs, open files, and locate Control Panel options without even touching your mouse and without digging through a cluttered Start menu. You can also use the arrow keys to select the shortcut you want to launch before pressing Enter. Copy, Cut, Paste Copy, Cut, and Paste are extremely important keyboard shortcuts for text-editing. If you do any typing on your computer, you probably use them. These options can be accessed using the mouse, either by right-clicking on selected text or opening the application’s Edit menu, but this is the slowest way to do it. After selecting some text, press Ctrl+C to copy it or Ctrl+X to cut it. Position the cursor where you want the text and use Ctrl+V to paste it. These shortcuts can save you a huge amount of time over using the mouse. Search the Current Page or File To quickly perform a search in the current application — whether you’re in a web browser, PDF viewer, document editor, or almost any other type of application — press Ctrl+F. The application’s search (or “Find”) feature will pop up, and you can instantly start typing a phrase you want to search for. You can generally press Enter to go to the next appearance of the word or phrase in the document, quickly searching through it for what you’re interested in. Switch Between Applications and Tabs Rather than clicking buttons on your taskbar, Alt+Tab is a very quick way to switch between running applications. Windows orders the list of open windows by the order you accessed them, so if you’re only using two different applications, you can just press Alt+Tab to quickly switch between them. If switching between more than two windows, you’ll have to hold the Alt key and press Tab repeatedly to toggle through the list of open windows. If you miss the window you want, you can always press Alt+Shift+Tab to move through the list in reverse. To move between tabs in an application — such as the browser tabs in your web browser — press Ctrl+Tab. Ctrl+Shift+Tab will move through tabs in reverse. Quickly Print If you’re the kind of person who still prints things, you can quickly open the print window by pressing Ctrl+P. This can be faster than hunting down the Print option in every program you want to print something from. Basic Browser Shortcuts Web browser shortcuts can save you tons of time, too. Ctrl+T is a very useful one, as it will open a new tab with the address bar focused, so you can quickly press Ctrl +T, type a search phrase or web address, and press Enter to go there. To go back or forward while browsing, hold the Ctrl key and press the left or right arrow keys. If you’d just like to focus your web browser’s address bar so you can type a new web address or search without opening a new tab, press Ctrl + L. You can then start typing something and press Enter. Close Tabs and Windows To quickly close the current application, press Alt+F4. This works on the desktop and even in new Windows 8-style applications. To quickly close the current browser tab or document, press Ctrl+W. This will often close the current window if there are no other tabs open. Lock Your Computer When you’re done using your computer and want to step away, you may want to lock it. People won’t be able to log in and access your desktop unless they know your password. You can do this from the Start menu or Start screen, but the fastest way to lock your screen is by quickly pressing Windows Key + L before you get up. Access the Task Manager Ctrl+Alt+Delete will take you to a screen that allows you to quickly launch the Task Manager or perform other operations, such as signing out. This is particularly useful because if can be used to recover from situations where your computer doesn’t appear responsive or isn’t accepting input. For example, if a full-screen game becomes unresponsive, Ctrl+Alt+Delete will often allow you to escape from it and end it via the Task Manager. Windows 8 Shortcuts On Windows 8 PCs, there are other very important keyboard shortcuts. Windows Key + C will open your Charms bar, while Windows Key + Tab will open the new App Switcher. These keyboard shortcuts will allow you to avoid the hot corners, which can be tedious to use with a mouse. On the desktop side, Windows Key + D will take you back to the desktop from anywhere. Windows Key + X will open a special “power user menu” that gives you quick access to options that are hidden in the new Windows 8 interface, including Shut Down, Restart, and Control Panel. If you’re interested in learning more keyboard shortcuts, be sure to check our longer lists of 47 keyboard shortcuts that work in all web browsers and 42+ keyboard shortcuts to speed up text-editing. Image Credit: Jeroen Bennink on Flickr

Read the article

Agile Like Jazz

- by Jeff Certain

(I’ve been sitting on this for a week or so now, thinking that it needed to be tightened up a bit to make it less rambling. Since that’s clearly not going to happen, reader beware!) I had the privilege of spending around 90 minutes last night sitting and listening to Sonny Rollins play a concert at the Disney Center in LA. If you don’t know who Sonny Rollins is, I don’t know how to explain the experience; if you know who he is, I don’t need to. Suffice it to say that he has been recording professionally for over 50 years, and helped create an entire genre of music. A true master by any definition. One of the most intriguing aspects of a concert like this, however, is watching the master step aside and let the rest of the musicians play. Not just play their parts, but really play… letting them take over the spotlight, to strut their stuff, to soak up enthusiastic applause from the crowd. Maybe a lot of it has to do with the fact that Sonny Rollins has been doing this for more than a half-century. Maybe it has something to do with a kind of patience you learn when you’re on the far side of 80 – and the man can still blow a mean sax for 90 minutes without stopping! Maybe it has to do with the fact that he was out there for the love of the music and the love of the show, not because he had anything to prove to anyone and, I like to think, not for the money. Perhaps it had more to do with the fact that, when you’re at that level of mastery, the other musicians are going to be good. Really good. Whatever the reasons, there was a incredible freedom on that stage – the ability to improvise, for each musician to showcase their own specialization and skills, and them come back to the common theme, back to being on the same page, as it were. All this took place in the same venue that is home to the L.A. Phil. Somehow, I can’t ever see the same kind of free-wheeling improvisation happening in that context. And, since I’m a geek, I started thinking about agility. Rollins has put together a quintet that reflects his own particular style and past. No upright bass or piano for Rollins – drums, bongos, electric guitar and bass guitar along with his sax. It’s not about the mix of instruments. Other trios, quartets, and sextets use different mixes of instruments. New Orleans jazz tends towards trombones instead of sax; some prefer cornet or trumpet. But no matter what the choice of instruments, size matters. Team sizes are something I’ve been thinking about for a while. We’re on a quest to rethink how our teams are organized. They just feel too big, too unwieldy. In fact, they really don’t feel like teams at all. Most of the time, they feel more like collections or people who happen to report to the same manager. I attribute this to a couple factors. One is over-specialization; we have a tendency to have people work in silos. Although the teams are product-focused, within them our developers are both generalists and specialists. On the one hand, we expect them to be able to build an entire vertical slice of the application; on the other hand, each developer tends to be responsible for the vertical slice. As a result, developers often work on their own piece of the puzzle, in isolation. This sort of feels like working on a jigsaw in a group – each person taking a set of colors and piecing them together to reveal a portion of the overall picture. But what inevitably happens when you go to meld all those pieces together? Inevitably, you have some sections that are too big to move easily. These sections end up falling apart under their own weight as you try to move them. Not only that, but there are other challenges – figuring out where that section fits, and how to tie it into the rest of the puzzle. Often, this is when you find a few pieces need to be added – these pieces are “glue,” if you will. The other issue that arises is due to the overhead of maintaining communications in a team. My mother, who worked in IT for around 30 years, once told me that 20% per team member is a good rule of thumb for maintaining communication. While this is a rule of thumb, it seems to imply that any team over about 6 people is going to become less agile simple because of the communications burden. Teams of ten or twelve seem like they fall into the philharmonic organizational model. Complicated pieces of music requiring dozens of players to all be on the same page requires a much different model than the jazz quintet. There’s much less room for improvisation, originality or freedom. (There are probably orchestral musicians who will take exception to this characterization; I’m calling it like I see it from the cheap seats.) And, there’s one guy up front who is running the show, whose job is to keep all of those dozens of players on the same page, to facilitate communications. Somehow, the orchestral model doesn’t feel much like a self-organizing team, either. The first violin may be the best violinist in the orchestra, but they don’t get to perform free-wheeling solos. I’ve never heard of an orchestra getting together for a jam session. But I have heard of teams that organize their work based on the developers available, rather than organizing the developers based on the work required. I have heard of teams where desired functionality is deferred – or worse yet, schedules are missed – because one critical person doesn’t have any bandwidth available. I’ve heard of teams where people simply don’t have the big picture, because there is too much communication overhead for everyone to be aware of everything that is happening on a project. I once heard Paul Rayner say something to the effect of “you have a process that is perfectly designed to give you exactly the results you have.” Given a choice, I want a process that’s much more like jazz than orchestral music. I want a process that doesn’t burden me with lots of forms and checkboxes and stuff. Give me the simplest, most lightweight process that will work – and a smaller team of the best developers I can find. This seems like the kind of process that will get the kind of result I want to be part of.

Search Results

Search found 26523 results on 1061 pages for 'jack back'.

Page 458/1061 | < Previous Page | 454 455 456 457 458 459 460 461 462 463 464 465 | Next Page >

- by Akshay Deep Lamba

- by Greg Jensen

- by James Michael Hare

- by subodhnpushpak

- by extended_events

- by Rick Strahl

- by Glav

- by kanichiro.nishida

- by David V. Corbin

- by Chris W Beal

- by Harish Ranganathan

- by david.butler(at)oracle.com

- by Asian Angel

- by Tanu Sood

- by Lahiru

- by Brian T. Jackett

- by Michael Snow

- by Daniel Moth

- by user287681

- by Your DisplayName here!

- by Raziel Gonzalez

- by Lori Lalonde

- by aspiringgeek

- by Chris Hoffman

- by Jeff Certain

< Previous Page | 454 455 456 457 458 459 460 461 462 463 464 465 | Next Page >