Search Results

Search found 18311 results on 733 pages for 'input director'.

Page 459/733 | < Previous Page | 455 456 457 458 459 460 461 462 463 464 465 466  | Next Page >

• Prevent oversteering catastrophe in racing games

  - by jdm

  When playing GTA III on Android I noticed something that has been annoying me in almost every racing game I've played (maybe except Mario Kart): Driving straight ahead is easy, but curves are really hard. When I switch lanes or pass somebody, the car starts swiveling back and forth, and any attempt to correct it makes it only worse. The only thing I can do is to hit the brakes. I think this is some kind of oversteering. What makes it so irritating is that it never happens to me in real life (thank god :-)), so 90% of the games with vehicles inside feel unreal to me (despite probably having really good physics engines). I've talked to a couple of people about this, and it seems either you 'get' racing games, or you don't. With a lot of practice, I did manage to get semi-good at some games (e.g. from the Need for Speed series), by driving very cautiously, braking a lot (and usually getting a cramp in my fingers). What can you do as a game developer to prevent the oversteering resonance catastrophe, and make driving feel right? (For a casual racing game, that doesn't strive for 100% realistic physics) I also wonder what games like Super Mario Kart exactly do differently so that they don't have so much oversteering? I guess one problem is that if you play with a keyboard or a touchscreen (but not wheels and pedals), you only have digital input: gas pressed or not, steering left/right or not, and it's much harder to steer appropriately for a given speed. The other thing is that you probably don't have a good sense of speed, and drive much faster than you would (safely) in reality. From the top of my head, one solution might be to vary the steering response with speed.

  Read the article

• Is It Possible to Change Default Windows Idle Time for Task Scheduler?

  - by alharaka

  From the official Microsoft docs: Detecting the Idle State The Task Scheduler service will verify that the computer is in an idle state every 15 minutes. The computer is considered idle if all the processors and all the disks were idle for more than 90% of the past 15 minutes and if there is no keyboard or mouse input during this period of time. Besides, any presentation type application that sets the ES_DISPLAY_REQUIRED flag will make Task Scheduler to not consider the system as being idle. In Windows 7, Task Scheduler considers a processor as idle even when low priority threads (thread priority < normal) execute. Is there any way to change the time to less than 15 minutes minutes? Am I assuming this hard-coded and impossible? My Google-fu has eluded me so far and I found nothing, but wanted to check here before giving up.

  Read the article

• Software development process for a part time University project for 1 developer?

  - by Pricey

  I will be doing a part time University project soon and the time frame for it is around 8 months with approximately 10-15 hours a week spent working on it, with a review by a tutor each quarter. My question is what software development process would you recommend using when the course requires you to work on your own in order to manage yourself as well as the project? I wanted to use a weekly or bi-weekly iterative approach to my work but a lot of the processes seem tailored to teams of people. I am looking at XP (Extreme Programming) OR Scrum as something that is less than the norm for University work but again Scrum I don't know a lot about yet, and a question I have is; can you say you are doing XP without pair-programming? because my tutor seems to think that I have to stick to all the practices otherwise I can't do it (nevermind if I am working alone). We can have external user input as well but due to the small timescales with part time work it may be more beneficial for myself to be the user as well, which is not what I prefer considering how I can get lost in the design.

  Read the article

• Difference between bug, defect and flaw

  - by Hossein

  I was reading "Software Security: Building Security In" and in the first chapter I faced with 3 terms: bug, defect and flaw. The author gave a definition for each of them but I couldn't completely understand these. Can someone give me some examples for each term? What is a defect and what is a flaw? I think I know what bug is, a bug is a malfunction of a part of system which produces undesirable result, be it crashing on a wrong input or miscalculating a series of computations. Can someone elaborate more and correct me if I am wrong in this? UPDATE To be more precise in the book I mentioned above, they (the words) are presented in a way to make a distinction, that's why I am asking to know more. In that book there are some examples denoting which sample belongs to what and which category. For example: Buffer overflow is said to be a bug and issues in method overriding (subclassing issues) is being related to flaw category. Again race condition handling issues are considered bugs and Error-handling problems (fails open) are told to be flaws! I want more elaboration on these regards.

  Read the article

• Munin - apache_watch_ plugin, does not show any data in the graphs that shows activity for per vhosts

  - by ovais.tariq

  I am using Munin for monitoring my server. I installed the apache_watch_ plugin so that i could see apache related activity. The graphs for apache_accesses, apache_processes and apache_volume work fine. But the graphs for Apache Documents served, Apache Input/output (bytes), Apache Requests don't show any activity in the graph. The important thing is that these graphs that don't show anything are supposed to show the data divided per vhosts. I am on Ubuntu 10.04.1 LTS (Lucid Lynx) and the munin version is 1.4.4. One thing that I think may be the cause for issue is that I have a separate config file for every vhost, which are included in the main config. But I can't really figure out any solution. Any help will be greatly appreciated!

  Read the article

• redirect an old URL using web.config

  - by Dog

  i'm still very new to using URL rewrites and redirects and i'm having some problems on something i thought was quite simple... i've just rebuilt a website and want to redirect the old URLs to the new ones... for example : http://www.mydomain.com/about.asp?lang=1 should now be http://www.mydomain.com/content.asp?id=100230&title=about&langid=1 unfortunately, everything i've tried is giving me errors or simply does nothing. here is one rule i tried : <rule name="redirectoldabout" enabled="true" stopProcessing="true"> <match url="( .*)" negate="true" /> <conditions> <add input="{HTTP_HOST}" pattern="^mydomain\.com/about\.asp\?lang=1$" /> </conditions> <action type="Redirect" url="http://www.mydomain.com/content.asp?id=100230&title=about&langid=1" redirectType="Permanent" /> but i get an error back : HTTP Error 500.19 - Internal Server Error The requested page cannot be accessed because the related configuration data for the page is invalid. any suggestions as to what i'm doing wrong? thanks dog

  Read the article

• RPi and Java Embedded GPIO: Java code to blink more LEDs

  - by hinkmond

  Now, it's time to blink the other GPIO ports with the other LEDs connected to them. This is easy using Java Embedded, since the Java programming language is powerful and flexible. Embedded developers are not used to this, since the C programming language is more popular but less easy to develop in. We just need to use a dynamic Java String array to map to the pinouts of the GPIO port names from the previous diagram posted. This way we can address each "channel" with an index into that String array. static String[] GpioChannels = { "0", "1", "4", "17", "21", "22", "10", "9" }; With this new dynamic array, we can streamline the main() of this Java program to activate all the ports. /** * @param args the command line arguments */ public static void main(String[] args) { FileWriter[] commandChannels; try { /*** Init GPIO port for output ***/ // Open file handles to GPIO port unexport and export controls FileWriter unexportFile = new FileWriter("/sys/class/gpio/unexport"); FileWriter exportFile = new FileWriter("/sys/class/gpio/export"); for (String gpioChannel : GpioChannels) { System.out.println(gpioChannel); // Reset the port unexportFile.write(gpioChannel); unexportFile.flush(); // Set the port for use exportFile.write(gpioChannel); exportFile.flush(); // Open file handle to port input/output control FileWriter directionFile = new FileWriter("/sys/class/gpio/gpio" + gpioChannel + "/direction"); // Set port for output directionFile.write(GPIO_OUT); directionFile.flush(); } And, then simply add array code to where we blink the LED to make it blink all the LEDS on and off at once. /*** Send commands to GPIO port ***/ commandChannels = new FileWriter[GpioChannels.length]; for (int channum=0; channum It's easier than falling off a log... or at least easier than C programming. Hinkmond

  Read the article

• DotNetNuke + PayPal

  - by Nuri Halperin

  A DotNetNuke i'm supporting has had a paypal "buy now" button and other variations with custom fields for a while now. About 2 weeks ago (somewhere in March 2010) they all stopped working. The problem manifested such that once you clicked the "buy now" button, Paypal site would throw a scary error page to the effect of: "Internal Server Error The server encountered an internal error or misconfiguration and was unable to complete your request. Please contact the server administrator, [email protected] and inform them of the time the error occurred, and anything you might have done that may have caused the error. More information about this error may be available in the server error log" Once I verified no cheeky content editor changed the page, I went digging for answers. The main source incompatibility of PayPal's simple HTML forms is that DNN includes a form on every page, and nested forms are not really supported. As blogged here and lamented here, the solution I came up with is simply to modify the form enctype to 'application/x-www-form-urlencoded' as illustrated below: 1: <input type="image" border="0" 2: src="https://www.paypal.com/en_US/i/btn/btn_buynowCC_LG.gif" 3: name="submit" 4: alt="PayPal - The safer, easier way to pay online!" 5: onClick="this.form.action='https://www.paypal.com/cgi-bin/webscr'; this.form.enctype='application/x-www-form-urlencoded';this.form.submit();" /> One would think that PayPal would want the masses submitting HTML in all manners of "enctype", but I guess every company has it's quirks. At least my favorite non-profit can now continue and accept payments. Sigh.

  Read the article

• How can I get run Ubuntu Desktop on my Galaxy Nexus?

  - by Jack Senechal

  On the Ubuntu for phones site it advertises the desktop view feature: "The phone becomes a full PC and thin client when docked.". And there's the demo by Canonical of something similar running under Ubuntu for Android. I realize they're different systems, but the end effect is in both is to have a full Ubuntu system running on the phone. I've installed Ubuntu Touch Preview on my Galaxy Nexus (toro), and it's working as expected (no cellular signal, but wifi works, etc). But when I plug in a monitor via HDMI it just mirrors the phone's touch display. There's also currently no bluetooth support for attaching keyboard and mouse. Keyboard only kind of works via USB, and mouse not at all. I've also tried running Ubuntu under Android via VNC, but the lack of responsiveness of VNC makes it impractical for daily use. I'd consider that route again if there is some way to make the UI more responsive. So the question is, how can set up my phone to run Ubuntu Desktop in a way that's useable as a laptop replacement? Is there a way to enable Desktop View on Ubuntu Touch? Or can I run Ubuntu for Android as in the previously referenced demo? Plugging into a monitor would be OK, but I'd love to be able to use the desktop interface with mouse and keyboard through the phone's screen as well. Touch input and an onscreen keyboard would be a plus but is definitely not necessary.

  Read the article

• Turn-based JRPG battle system architecture resources

  - by BenoitRen

  The past months I've been busy programming a 2D JRPG (Japanese-style RPG) in C++ using the SDL library. The exploration mode is more or less done. Now I'm tackling the battle mode. I have been unable to find any resources about how a classic turn-based JRPG battle system is structured. All I find are discussions about damage formula. I've tried googling, searching gamedev.net's message board, and crawling through C++-related questions here on Stack Exchange. I've also tried reading source code of existing open source RPGs, but without a guide of some sort it's like trying to find a needle in a haystack. I'm not looking for a set of rules like D&D or anything similar. I'm talking purely about code and object structure design. A battle system asks the player for input using menus. Next the battle turn is executed as the heroes and the enemies execute their actions. Can anyone point me in the right direction? Thanks in advance.

  Read the article

• Mapping dynamic buffers in Direct3D11 in Windows Store apps

  - by Donnie

  I'm trying to make instanced geometry in Direct3D11, and the ID3D11DeviceContext1->Map() call is failing with the very helpful error of "Invalid Parameter" when I'm attempting to update the instance buffer. The buffer is declared as a member variable: Microsoft::WRL::ComPtr<ID3D11Buffer> m_instanceBuffer; Then I create it (which succeeds): D3D11_BUFFER_DESC instanceDesc; ZeroMemory(&instanceDesc, sizeof(D3D11_BUFFER_DESC)); instanceDesc.Usage = D3D11_USAGE_DYNAMIC; instanceDesc.ByteWidth = sizeof(InstanceData) * MAX_INSTANCE_COUNT; instanceDesc.BindFlags = D3D11_BIND_VERTEX_BUFFER; instanceDesc.CPUAccessFlags = D3D11_CPU_ACCESS_WRITE; instanceDesc.MiscFlags = 0; instanceDesc.StructureByteStride = 0; DX::ThrowIfFailed(d3dDevice->CreateBuffer(&instanceDesc, NULL, &m_instanceBuffer)); However, when I try to map it: D3D11_MAPPED_SUBRESOURCE inst; DX::ThrowIfFailed(d3dContext->Map(m_instanceBuffer.Get(), 0, D3D11_MAP_WRITE, 0, &inst)); The map call fails with E_INVALIDARG. Nothing is NULL incorrectly, and this being one of my first D3D apps I'm currently stumped on what to do next to track it down. I'm thinking I must be creating the buffer incorrectly, but I can't see how. Any input would be appreciated.

  Read the article

• Blocking ports on the public IP assigned to lo interface in GNU/Linux

  - by nixnotwin

  I have setup my Ubuntu server as a router and webserver by following the answer given here. My ISP facing interface eth0 has a private 172.16.x.x/30 ip and my lo interface has a public IP as mentioned in the answer to the question linked above. The setup is working well. The only snag I have experienced is that I could not find a way to block the ports exposed by the public IP on the lo interface. I tried doing iptables -A INPUT -i eth0 -j DROP, and my server lost connectivity to the public network (internet). I could not ping any public ips. What I want is a way to block ports that are exposed by the public ip on the lo interface. And also I require iptables rules that can expose ports like 80 or openvpn port to the public network.

  Read the article

• Bad archive mirror using PXE boot method

  - by user11566

  I'm trying to automatically install Ubuntu on a client PC by using the PXE BOOT method....my Objectives are below: I am following the steps given in this link installation using PXE BOOT the server will have a KICKSTART config file which contains the parameters for the OS installation and the files which are required for the OS installations. the client will have to detect this configuration along with the setup files and complete the installation without any input from the user. In my server I have installed DHCP3-server,Apache2 and TFTP to help me with the installation. I have nearly achieved my first objective, I am able to boot my client using the files stored in the server but during the installation stage it is asking me to CHOOSE A MIRROR OF UBUNTU ARCHIVE I gave the server's IP address and the path in the server where the files are located but then its giving me this error BAD ARCHIVE MIRROR So is it possible that instead of downloading all the files from the internet and storing them on my disk can I use the files which comes with the UBUNTU-CD, and how to store these files in what format (should I zip them) on the disk? secondly I am also generating the ks.cfg which I wanted to give to the client for automatic installation of the OS. So how should the configuration file be given to the installation process?

  Read the article

• Can't play stream from TorrentFlux server

  - by thegreyspot

  I am trying to stream a video from my TorrentFlux-b4rt server. I tried multiple media players, none work. Only VLC was able to produce an error message: input can't be opened: VLC is unable to open the MRL 'mms://..*.*:8080/'. Check the log for details. I have tried multiple computers on different networks and all have the same issue. I am using Windows 7 to play the videos, and the server is Torrentflux-b4rt 1.0-beta2 with ubuntu 9.10.

  Read the article

• Distributed, Parallel, Fault-tolerant File System

  - by Eddified

  There are so many choices that it's hard to know where to start. My requirements are these: Runs on Linux Most of the files will be between 5-9 MB in size. There will also be a significant number of small-ish jpgs (100px x 100px). All of the files need to be available over http. Redundancy -- ideally it would provide the space efficiency similar to RAID 5 of 75% (in RAID 5 this would be calculated thus: with 4 identical disks, 25% of the space is used for parity = 75% efficent) Must support several petabytes of data scalable runs on commodity hardware In addition, I look for these qualities, though they are not "requirements": Stable, mature file system Lots of momentum and support etc I would like some input as to which file system works best for the given requirements. Some people at my organization are leaning towards MogileFS, but I'm not convinced of the stability and momentum of that project. GlusterFS and Lustre, based on my limited research, appear to be better supported... Thoughts?

  Read the article

• SEO Keyword Research Help

  - by user5857

  I'm new at SEO and keyword research. I am using Market Samurai as my research tool, and I was wondering if I could ask for your help to identify the best key word to target for my niche. I do plan on incorporating all of them into my site, but I wanted to start with one. If you could give me your input on these keywords, I would appreciate it. This is all new to me :) I'm too new to post pictures, but here are my keywords (Searches, SEO Traffic, and SEO Value / Day): Searches | SEO Traffic | PBR | SEO Value | Average PR/Backlinks of Current Top 10 1: 730 | 307 | 20% | 2311.33 | 1.9 / 7k-60k 2: 325 | 137 | 24% | 822.94 | 2.3 / 7k-60k 3: 398 | 167 | 82% | 589.79 | 1.6 / 7k-60k I'm wondering if the PBR (Phrase-to-broad) value of #1 is too low. It seems like the best value because the SEOV is crazy high. That is like $70k a month. #3 has the highest PBR, but also the lowest SEOV. #2 doesn't seem worth it because of the PR competetion. Might be a little too hard to get into the top page of Google. I'm wondering which keywords to target, and if I should be looking at any other metric to see if this is a profitable niche to jump into. Thanks.

  Read the article

• BizTalk 2009 - Scoped Record Counting in Maps

  - by StuartBrierley

  Within BizTalk there is a functoid called Record Count that will return the number of instances of a repeated record or repeated element that occur in a message instance. The input to this functoid is the record or element to be counted. As an example take the following Source schema, where the Source message has a repeated record called Box and each Box has a repeated element called Item: An instance of this Source schema may look as follows; 2 box records - one with 2 items and one with only 1 item. Our destination schema has a number of elements and a repeated box record.  The top level elements contain totals for the number of boxes and the overall number of items.  Each box record contains a single element representing the number of items in that box. Using the Record Count functoid it is easy to map the top level elements, producing the expected totals of 2 boxes and 3 items: We now need to map the total number of items per box, but how will we do this?  We have already seen that the record count functoid returns the total number of instances for the entire message, and unfortunately it does not allow you to specify a scoping parameter.  In order to acheive Scoped Record Counting we will need to make use of a combination of functoids. As you can see above, by linking to a Logical Existence functoid from the record/element to be counted we can then feed the output into a Value Mapping functoid.  Set the other Value Mapping parameter to "1" and link the output to a Cumulative Sum functoid. Set the other Cumulative Sum functoid parameter to "1" to limit the scope of the Cumulative Sum. This gives us the expected results of Items per Box of 2 and 1 respectively. I ran into this issue with a larger schema on a more complex map, but the eventual solution is still the same.  Hopefully this simplified example will act as a good reminder to me and save someone out there a few minutes of brain scratching.

  Read the article

• Disable pop-up for "Faulting application" on login - Windows Server 2003

  - by Mikael Svenson

  I have a service running on a Windows 2003 server. The service executes a .exe file to process some data. Sometimes the .exe crashes due to incorrect input and it logs an error to the Application Log which is fine. If I remote login to the server I get a pop-up of the .exe file crash, for each crash which has occured since I last logged in. The crashes can safely be ignored and I'd like to ignore these pop-ups. Is there a way to disable these pop-ups?

  Read the article

• How do I use an SSH public key from a remote machine?

  - by kubi

  Setup The public keys are set up on a Macbook. I can do a passwordless push to github and a server (iMac) on the local network. The Problem I know the keys are partially setup correctly, because I everything works if I'm sitting at the Macbook. What doesn't work is when I SSH into the Macbook remotely and attempt to push to github or to the iMac server. I'm prompted to input my SSH key passphrase. What am I missing to enable pushing to github from the Macbook while logged in remotely from the iMac?

  Read the article

• Monitoring Dell/HP Servers Running ESXi (Free)

  - by Untalented

  What are you all doing to monitor ESXi servers that run the free edition? With the lack of SNMP support, it seems fairly limited to me. What'd I'd like to be able to do is get some type of alert when a drive or other hardware fails. I've seen a few articles on getting OpenManage installed on an ESXi box (to rebuild an array), but it seems to be quite a pain as well. Even if I get OpenManage working, I won't have alerts without SNMP. Any comments, input, or guidance would be greatly appreciated.

  Read the article

• How to install Imagick on Mac OS with XAMPP

  - by Cat

  I'm having some trouble installing Imagick on a Mac. I have XAMPP installed and when I run 'sudo pecl install imagick', I get this error: checking ImageMagick MagickWand API configuration program... configure: error: not found. Please provide a path to MagickWand-config or Wand-config program. ERROR: `/private/tmp/pear/temp/imagick/configure --with-imagick="/Applications/XAMPP/xamppfiles/bin"' failed The error above shows up when I input /Applications/XAMPP/xamppfiles/bin after Please provide the prefix of Imagemagick installation [autodetect] Do I need to install some other library before running the Imagick install command?

  Read the article

• 1.5 TB USB Drive failed to mount

  - by user89348

  Seagate 1.5Tb FreeAgent USB Hard Drive. Formatted FAT32. I figure it is 75% full. Used to work fine in XUBUNTU it shows up in Cairo Dock but when I click on it I get "failed to mount drive'. Nautilus does not display the icon nor does Thunar. Windows Vista will no longer recognise drive either. Back Track 5R3 also no longer fails to mount it. BUT and here is the BIG BUT my Pioneer DV-410 reads the files and plays the everything just fine. I believe this all happened after an unclean shutdown / XUbuntu 12.10 system freeze. Why can't XUBUNTU mount this drive when a crappy 13 year old DVD player can mount it. I am desperate to back up the data before just in case the drive becomes completely unreadable. Using XUBUNTU 12.10 Quantal current 3.5.0.17 Kernel (past 3 Kernels wont read it either) and all newest apt-get update / dist-upgrade are applied. I will post any other info you folks request as needed. Additional info as requested by githlar. $ sudo fsck.vfat /dev/sdb dosfsck 3.0.13, 30 Jun 2012, FAT32, LFN Read 512 bytes at 0:Input/output error $ lsusb Bus 001 Device 003: ID 148f:3070 Ralink Technology, Corp. RT2870/RT3070 Wireless Adapter Bus 002 Device 002: ID 0bc2:3001 Seagate RSS LLC Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

  Read the article

• increase performance of virtual machines on the 27" imac

  - by evan

  I'm using a 27" iMac (i7, 8GB RAM) at work and normally run two or three virtual machines at the same time, which hurts the performance of each virtual machine. I've learned on these forums the best way to increase virtual machine performance (aside from RAM) is to have them running on a separate hard drive from the one the OS is on. Of course with the iMac you can only have one hard drive and not even an SAS or solid state drive (well you could probably take it apart and put one in yourself but I wouldn't be permitted to do that). That being said, do you think it would help to run one or more virtual machines from a firewire external drive (or a usb 2.0)? Thanks for your input!

  Read the article

• sox mix nested scripts on amazon ec2 rhel linux

  - by Ray

  I'm trying to use "sox" to mix some audio files. The command works great on my Mac terminal sox -m audio.wav "| sox upload.wav -p trim 2 1 pad 6" final.wav This mixes (not concatenate) audio.wav and a section of upload.wav from the 2nd second to the 3rd second and adds 6 seconds of padding in the front, and outputs to final.wav Now the problem is, the SAME EXACT command does NOT work my Amazon EC2 RHEL box. (sox is installed correctly). I get the following error sox soxio: Can't open input file `| sox upload.wav -p trim 2 2 pad 6': No such file or directory For some reason RedHat doesn't like the double quotes. Even though it is documented to be used this way. Thanks for your help!

  Read the article

• SVN Server not responding

  - by Rob Forrest

  I've been bashing my head against a wall with this one all day and I would greatly appreciate a few more eyes on the problem at hand. We have an in-house SVN Server that contains all live and development code for our website. Our live server can connect to this and get updates from the repository. This was all working fine until we migrated the SVN Server from a physical machine to a vSphere VM. Now, for some reason that continues to fathom me, we can no longer connect to the SVN Server. The SVN Server runs CentOS 6.2, Apache and SVN 1.7.2. SELinux is well and trully disabled and the problem remains when iptables is stopped. Our production server does run an older version of CentOS and SVN but the same system worked previously so I don't think that this is the issue. Of note, if I have iptables enabled, using service iptables status, I can see a single packet coming in and being accepted but the production server simply hangs on any svn command. If I give up waiting and do a CTRL-C to break the process I get a "could not connect to server". To me it appears to be something to do with the SVN Server rejecting external connections but I have no idea how this would happen. Any thoughts on what I can try from here? Thanks, Rob Edit: Network topology Production server sits externally to our in-house SVN server. Our IPCop (?) firewall allows connections from it (and it alone) on port 80 and passes the connection to the SVN Server. The hardware is all pretty decent and I don't doubt that its doing its job correctly, especially as iptables is seeing the new connections. subversion.conf (in /etc/httpd/conf.d) LoadModule dav_svn_module modules/mod_dav_svn.so <Location /repos> DAV svn SVNPath /var/svn/repos <LimitExcept PROPFIND OPTIONS REPORT> AuthType Basic AuthName "SVN Server" AuthUserFile /var/svn/svn-auth Require valid-user </LimitExcept> </Location> ifconfig eth0 Link encap:Ethernet HWaddr 00:0C:29:5F:C8:3A inet addr:172.16.0.14 Bcast:172.16.0.255 Mask:255.255.255.0 inet6 addr: fe80::20c:29ff:fe5f:c83a/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:32317 errors:0 dropped:0 overruns:0 frame:0 TX packets:632 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2544036 (2.4 MiB) TX bytes:143207 (139.8 KiB) netstat -lntp Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 0.0.0.0:3306 0.0.0.0:* LISTEN 1484/mysqld tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN 1135/rpcbind tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 1351/sshd tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 1230/cupsd tcp 0 0 127.0.0.1:25 0.0.0.0:* LISTEN 1575/master tcp 0 0 0.0.0.0:58401 0.0.0.0:* LISTEN 1153/rpc.statd tcp 0 0 0.0.0.0:5672 0.0.0.0:* LISTEN 1626/qpidd tcp 0 0 :::139 :::* LISTEN 1678/smbd tcp 0 0 :::111 :::* LISTEN 1135/rpcbind tcp 0 0 :::80 :::* LISTEN 1615/httpd tcp 0 0 :::22 :::* LISTEN 1351/sshd tcp 0 0 ::1:631 :::* LISTEN 1230/cupsd tcp 0 0 ::1:25 :::* LISTEN 1575/master tcp 0 0 :::445 :::* LISTEN 1678/smbd tcp 0 0 :::56799 :::* LISTEN 1153/rpc.statd iptables --list -v -n (when iptables is stopped) Chain INPUT (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination Chain FORWARD (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination Chain OUTPUT (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination iptables --list -v -n (when iptables is running, after one attempted svn connection) Chain INPUT (policy ACCEPT 68 packets, 6561 bytes) pkts bytes target prot opt in out source destination 19 1304 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED 0 0 ACCEPT icmp -- * * 0.0.0.0/0 0.0.0.0/0 0 0 ACCEPT all -- lo * 0.0.0.0/0 0.0.0.0/0 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:22 1 60 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:80 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:80 0 0 ACCEPT udp -- * * 0.0.0.0/0 0.0.0.0/0 state NEW udp dpt:80 Chain FORWARD (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination Chain OUTPUT (policy ACCEPT 17 packets, 1612 bytes) pkts bytes target prot opt in out source destination tcpdump 17:08:18.455114 IP 'production server'.43255 > 'svn server'.local.http: Flags [S], seq 3200354543, win 5840, options [mss 1380,sackOK,TS val 2011458346 ecr 0,nop,wscale 7], length 0 17:08:18.455169 IP 'svn server'.local.http > 'production server'.43255: Flags [S.], seq 629885453, ack 3200354544, win 14480, options [mss 1460,sackOK,TS val 816478 ecr 2011449346,nop,wscale 7], length 0 17:08:19.655317 IP 'svn server'.local.http > 'production server'k.43255: Flags [S.], seq 629885453, ack 3200354544, win 14480, options [mss 1460,sackOK,TS val 817679 ecr 2011449346,nop,wscale 7], length 0

  Read the article

< Previous Page | 455 456 457 458 459 460 461 462 463 464 465 466  | Next Page >