Search Results

Search found 18596 results on 744 pages for 'c how to detect all ip addresses from a lan'.

Page 46/744 | < Previous Page | 42 43 44 45 46 47 48 49 50 51 52 53  | Next Page >

• Lost contact with my NAS after changing its IP

  - by Beles

  I did some brain-dead reconfiguring of my D-Link DNS-323 NAS some days ago. I have a home network where each computer gets a dynamically allocated IP address starting at 192.168.1.100. The irritating point (for me at least) was that the NAS changed IP if the power went down or I turned off the router. I then had to remap a drive-letter to point to the new IP address of the NAS. To remedy that I configured the NAS to have a static IP, 192.168.0.10. I had no good reason to choose that IP, other than I found it in a user manual for the NAS. After I changed the IP and rebooted the NAS it disappeared from the network and was never to be found again. Now I have a black brick standing in my home, looking good, but "dead". Could anyone point me in a direction which helps me solve this problem? I have about 100gb worth of pic of my children on this brick so I really want it back :-) Sincerely,

  Read the article

• Adding a second IP address for IIS - static vs dynamic A records

  - by serialhobbyist

  I'm looking to add a second IP address to IIS so that I can run two sites with different SSL certificates. When I added one on my play box and ran ipconfig /registerdns both addresses were registered in DNS with the server's name. So, I deleted the A record for the new IP address and rebooted. That also registered both names. So, then I went into the network config for the adapter and, on the DNS tab, unchecked "Register this connection's addresses in DNS". I deleted the A record for the new IP address again and re-ran ipconfig /registerdns. This time, it deleted the A record for the old IP address and didn't created one for the new address. Neither of these is what I want: I want the main IP address to be registered and refreshed automatically as a dynamic DNS record and the second IP address to be registered and managed as a static address. Is there any way to achieve this?

  Read the article

• access VPN machine macosx same subnet

  - by matheszabi

  I would like to access the office machine, which has a fixed IP, and is available only in its local LAN. Let say 192.168.1.100. I have a VPN with username/password connection and I am trying to access the office machine from another location, i.e., another LAN, which has the same subnet: 192.168.1.50. I am using MacOSX 10.8. I have checked the "send all trafic over VPN connection, but I think it looks like it doesn't care and is searching in Local. I do not have admin privileges and can't request to make changes to the network settings in both LANs. Is there any way to connect to the desired remote machine?

  Read the article

• Davicom DM9601 USB LAN NIC Ubuntu 11.10 issue

  - by Gaurav_Java

  I have a davicom dm9601 USB ethernet card. When I plug in the device, it is detected and drivers are loaded, but I can't connect to internet using it. It works perfectly on XP, other laptop but not working on Ubuntu 11.10 How can I install the driver for this? I have tried many things But nothing is working. If I go to this link driver but not compiling or may I be doing something wrong. I found this one but don't know how to follow these steps . This is my lsusb output: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 004: ID 064e:a103 Suyin Corp. Acer/HP Integrated Webcam [CN0314] Bus 003 Device 002: ID 08ff:1600 AuthenTec, Inc. AES1600 Bus 005 Device 002: ID 0a46:9601 Davicom Semiconductor, Inc. DM9601 Fast Ethernet Adapter Bus 006 Device 002: ID 046d:c045 Logitech, Inc. Optical Mouse Bus 003 Device 003: ID 0a5c:2101 Broadcom Corp. Bluetooth Controller Bus 004 Device 002: ID 04d9:1702 Holtek Semiconductor, Inc. But when I connected my Internet from different system its start working.

  Read the article

• Mac OS X 10.6.5 and link-local addresses (169.254.x.x)

  - by WMR

  Starting with the latest update of Mac OS X (10.6.5) all Apple applications (Safari, Mail, iChat, etc.) don't connect to the internet anymore, if the assigned IP address is from the 169.254.0.0./16 range. This is not a routing problem, I can still ping any server I want, even connecting via command line tools works. I know this problem could easily be fixed by changing the IP address to a more common RFC1918 address (e.g. 192.168.0.0./16), but this is what the ISP assigns via DHCP and I am not sure I can convince them (Xplornet) to change that. So I am wondering if there's a (hidden?) setting that would convince Apple applications, that they are in fact still online.

  Read the article

• Why my dns server ip got blacklisted instead of my email server ip?

  - by Khurram Masood

  We are hosting our own dns server our scenario is as under; dns ip: a.b.c.1 fqdn:ns1.example.com ------ reverse lookup to a.b.c.1 mail server ip a.b.c.2 mail.example.com ------ reverse lookup to a.b.c.2 smtp.example.com ------ no reverse lookup pop.example.com ------ no reverse lookup web server ip a.b.c.3 example.com ------ reverse lookup to a.b.c.3 www.example.com ------ no reverse lookup a few days back our dns server ip got blacklisted and all our services were down from outside. We had also added a new dns server on a separate network that caused our domain and machines with same names as above to resolve on different ips, can this b a cause of being blacklisted? But all blacklists points towards spamming. Can anyone please explain why my dns ip got blacklisted instead of my email or web server ip?

  Read the article

• Google Analytics: Block Your Dynamic IP Visits?

  - by 4thSpace

  I have a dynamic IP, which doesn't work for Google Analytics IP filtering. I read this post How to excludes my visits from Google Analytics? but don't see any code for setting the variable mentioned there. Has anyone been able to block their website visits from Google Analytics using a cookie? EDIT: This seems to work https://tools.google.com/dlpage/gaoptout. Although I don't think it was designed as I'm using it.

  Read the article

• Blocking IP's Nginx behind proxy

  - by FunkyChicken

  I'm running a Nginx 1.2.4 webserver here, and I'm behind a proxy of my hoster to prevent ddos attacks. The downside of being behind this proxy is that I need to get the REAL IP information from an extra header. In PHP it works great by doing $_SERVER[HTTP_X_REAL_IP] for example. Now before I was behind this proxy of my hoster I had a very effective way of blocking certain IP's by doing this: include /etc/nginx/block.conf and to allow/deny IP's there. But now due to the proxy, Nginx sees all traffic coming from 1 IP. Is there a way I can get Nginx to read the IP's like how PHP does, with the X-REAL-IP header?

  Read the article

• Wine for ubuntu doesn't detect webcam

  - by user23950

  I'm using wine in order to install and run yahoo messenger on ubuntu(9.10) But it does not detect the webcam. Not unlike in skype that it can detect(skype not run through wine). What do I do in order for it to detect the cam?

  Read the article

• port forwarding using 3 static ip addresses

  - by Danny

  I am new to configuring routers. We have purchased a RV016 Cisco business router that has multiwan capability. What we are attempting to do is take map services from 3 different servers and assign 3 different static IP addresses and then forward port 80 through the router. A short term solution to building a proxy server. Is this possible? Right now we have a consumer grade Cisco router and assign a static IP and it works, we attempted the same settings on the business router and cannot get to the internet. We set it DHCP and it works fine, however we want to to forward the static ports not use DHCP.

  Read the article

• Cisco ASA 5505 inside interface multiple ip addresses

  - by Oneiroi

  I have an issue this morning where I want to be able to assign multiple ip addresses to the inside interface to facilitate an ip range migration for an office. Namely from a 192.168.1.x range to the new range, with the minimum of interruption for those working in the office. (New DHCP leases will use the new range, whilst those still on the 192.168.1.x range can continue to work until their lease is renewed). However I can not for the life of me figure out how to achieve this, trying to create multiple interfaces for the job leads to complaints about the license only allowing 2 active interfaces. Any suggestions? thanks in advance.

  Read the article

• Samba domain trust errors on a specific interface

  - by John K

  We have a windows domain that also has RHEL member servers in it. All the servers have a primary network connection to the LAN, but some servers also have private dedicated links to one of our RHEL servers, which serves as a head to our SAN storage. This particular server is running Samba 3.5.15, and is running in domain authentication mode. Users can access shares on this server without a problem over the LAN connection from our Windows servers, but if a user tries to access the shares over a private link (i.e. a 192.168.1.2 address to the RHEL server) users get an error "The trust relationship between this workstation and the primary domain failed."

  Read the article

• VM's, virtual networks and my home network.

  - by Jason Taylor

  I want to create a small lab of VM's to test out networking with. I have two PC's running VMWare and I need the VM's on these two PC's to be connected to their own LAN. I am planning on bridging the VM's into my home network. My home network and PC's are in the 192.168.0.0 range, but I want my VM's to be in 10.1.0.0. If I do it this way (Bridging the VM's on both hosts into the network) will the VM's be able to communicate? Will my home router freak out seeing two different subnets? Is there another, easier way to connect the virtual lan's on two vmware workstations together?

  Read the article

• NETSH : Set default ip address for an interface with multiple Ips

  - by elarichi.y

  To test a load balancer I need to switch my ip address several time a day, and keep other ips routing trough other Wans. I run these commands in a batch script: netsh interface ip set address "Connexion au réseau local" static %ipd% 255.255.255.0 192.168.1.1 1 netsh in ip add address "Connexion au réseau local" %ips1% 255.255.255.0 netsh in ip add address "Connexion au réseau local" %ips2% 255.255.255.0 ipd: is the default ip I want to set (all traffic should go trough it). ips1 and ips2 : are the secondary ips I want to keep but what ever I do all traffic goes trough one IP !! (first one in the range) Please help me with this issue.

  Read the article

• Android real time multiplayer over LAN

  - by Heigo

  I've developed several games for the android platform and now planning to create my first multiplayer game. What I have in mind is basically just a 2-player game witch you can play with 2 phones over local area connection/WiFi. Both phones need to be able to pass 3 integer values to the other phone in real time. So far I have considered using Socket's, but before I dig into it too deep I wanted to ask if there might be a better approach? Thanks!

  Read the article

• solaris + match the network device name according to IP address

  - by yael

  how to find the device name as ( e1000g2 , e1000g3 , etc ) according to his IP address on Solaris machine for example ifconfig -a | grep 10.106.134.133 inet 10.106.134.133 netmask ffffff00 broadcast 10.106.134.255 ifconfig with grep command view only the line with the IP address , and the device name appears before the IP address so my target is to match the device name according to the IP address on Solaris machine , and then insert the device name in to parameter ( ksh ) please advice? full example: from ifconfig -a ( I get the IP and device name , what I need is to find the device name according to IP address , and insert the device name in to parameter ) e1000g2: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 inet 10.106.134.133 netmask ffffff00 broadcast 10.106.134.255

  Read the article

• How to combine with openvpn, dynamic-ip?

  - by asfasdv

  Dear everyone, I am currently using openvpn to surf online to bypass censorship. Let me show you the initial scenario: before openvpn is turned on: IP: 1.2.3.4 (hypothetical, checked by visiting whatismyip.com/) after openvpn is turned on IP: 10.2.3.4 (this is also checked with whatismyip.com/, I assume this is where the vpn's exit point's IP ) Situation: Once I enable openvpn, I can still ssh into this computer by sshing into 1.2.3.4, even though visiting whatismyip.com/ says it's 10.2.3.4. However, I am on dynamic IP, I run a website, and am using tools (inadyn in particular) which pings the freedns.afraid.org (my dns server) and updates my ip. The messed up part is when inadyn does so, my dns changes the ip to 10.2.3.4, which is presumably the exit point of my vpn. How do I get around this? (Note that sshing into 1.2.3.4 STILL works).

  Read the article

• Turn on PC power remotely through the Internet?

  - by W.N.

  I use SVN for my work at home and office, but I usually forget to commit the changes before shutdown. Therefore, I wish I could turn on my home/office PC at office/home. I already have TeamViewer installed on both PCs, so it will be okay as soon as the power is turned on. I have read many articles about this, I found both my PC and office computers support Wake-on-LAN. However, I don't know much about other config. And I need to turn on my computers through the Internet, not on LAN. My office Internet connection has static IP, however, my home Internet connection has dynamic IP, it changes as soon as I reset the modem, but it is not a big problem, I rarely turn the Internet modem off. And I don't have privilege to config office Internet connection, but I have Administration privilege on both PCs. Please give me details steps to turn on my office PC from home, and turn on my home PC from office.

  Read the article

• Amazon EC2 - Reserved Private Addresses

  - by reach4thelasers

  I've got a private DNS Server running on Amazon EC2. I don't need a public IP Address because its only used for private addressing web1.xxx.internal database1.xxx.internal Problem is I had to terminate the instance recently and start a new one. This meant that the private IP address of the DNS server changed and I had to log in to each of my other 15 server one-by-one and change the DNS address to point to the new DNS server. There must be a better way to do this, if so, what is it?

  Read the article

• Wi-LAN sues everybody over Bluetooth

  <b>CNet:</b> "A small Canadian wireless company is threatening to take a huge chunk of the technology industry to court."

  Read the article

• Slow remote desktop connection to VPS

  - by Jonathan

  When I use Windows 7's remote desktop connection to our company's VPS (Win Server 2008 32bit) I receive a very slow connection - most of the times it actually grinds down to a complete halt. This is in contrast to my team mates which have no problem remoting to the VPS. I'm using a brand new Dell Studio 1558 laptop with Intel Core i7 and 4GB RAM with a clean installation of Windows 7 64bit Ultimate. Any suggestions for how to diagnose \ solve \ workaround the problem would be appreciated. UPDATES: I checked, and it seems the problem exists with all the computers connected to my home LAN. Once I take my laptop to the nearest coffee shop it works fine. What could be the problem with the LAN?

  Read the article

• Virtual IP, and Reverse Proxying Ports (Making up terms)

  - by macintosh264

  So here is the exact situation that I have I have 2 game servers in my house. One on port 25565, and the second on 25567. I have only one IP in my house I need to get a "virtual IP" for the second server. Some way of giving the computer that runs these game servers a second IP (linux) I need the Virtual IP to receive connections on 25565 and forward the data to 25567. Although if linux recognizes the second IP in networking I assume I can bind to the second IP on port 25565

  Read the article

• How to use a specific Ip to access specific sites by?

  - by Dani AM

  My Company registered in certain services on the Web and are relying on the company's Ip to use these services, Director asked me to allow some staff to enter these sites from outside the company,after authorized staff enter to comany's site, How could they use the company's Ip to allow them to browse services sites ? Do I need to use a method such as proxy sites like youtube proxy? or there is another way?How do I do this in asp.net? thanks in advance.

  Read the article

• How to use a specific IP to access specific sites by?

  - by Dani AM

  My Company registered in certain services on the Web and are relying on the company's IP to use these services, Director asked me to allow some staff to enter these sites from outside the company, after authorized staff enter to comany's site. How could they use the company's IP to allow them to browse services sites? Do I need to use a method such as proxy sites like youtube proxy? or there is another way?How do I do this in asp.net? Thanks in advance.

  Read the article

• Should the website switch language based on IP address or browser language?

  - by SuperRomia

  Geo-location has been used most by Websites to do redirection, but I have found that several IP addresses locate a country which has using several languages. Meantime, some users prefer to using the language setup in their system. For example, a person from United States goes to Japan and using the Internet connection from there to surf Website, but the Website redirects him to Japanese language. So, should I give the web user a choice to select the language detected on their browser or force them to the website detected by IP address?

  Read the article

< Previous Page | 42 43 44 45 46 47 48 49 50 51 52 53  | Next Page >