Search Results

Search found 3479 results on 140 pages for 'chris ridenour'.

Page 46/140 | < Previous Page | 42 43 44 45 46 47 48 49 50 51 52 53  | Next Page >

• Client/server application RPC connection gets disconnected very frequently

  - by Chris Thompson

  I have a client/server application that uses RPC for the client to communicate with the server. Fairly regularly, I get an event in the Application log that the RPC connection was disconnected: Client callback failed ((0x80010108) ) I have the Windows Firewall disabled on both machines. I've even run the client on a second computer with a clean Windows XP install without any group policies. This has been going on for a long time and no one has been able to figure out why it's happening. The same client/server app works fine at other client locations. Any thoughts?

  Read the article

• squid will not listen on specific IP

  - by Chris

  I have a public subnet with squid installed. Let's say my subnet is from 1.2.3.2 to 1.2.4.254. When I set the following: http_port 50000 http_port 1.2.3.2:50000 it is working. But when I set: http_port 1.2.4.37:50000 it is not working. It is only working with my first public IP from my subnet. The error I get when it is not working is the following: commBind: Cannot bind socket FD 10 to 1.2.4.37:50000: (99) Cannot assign requested address What is wrong with my configuration? @Zoredache I have a dedicated server and the whole subnet is defined as IP Range. When I use only the port or the first IP and doing netstat -ntlp | grep 46555 I get the following: tcp 0 0 0.0.0.0:50000 0.0.0.0:* LISTEN 25532/(squid ) When I use my specific IP, then the netstat query will show nothing, as the server does not start. I don't want squid to listen on all or the first IP, it is just a specific one it should listen to.

  Read the article

• How to split an m4v file?

  - by Chris

  I downloaded a TV season on iTunes (.m4v files), however the files are clustered into 3 episodes each. I'd like to chop these up so that each episode is in it's own file. Googling around a while didn't provide any promising leads. What's the easiest way to split these files up? Thanks in advance, Cheers!

  Read the article

• How do I get netcat to accept connections from outside the LAN?

  - by Chris

  I'm using netcat as a backend to shovel data back and forth for a program I'm making. I tested my program on the local network, and once it worked I thought it would be a matter of simply forwarding a port from my router to have my program work over the internet. Alas! This seems not to be the case. If I start netcat listening on port 6666 with: nc -vv -l -p 6666, then go to 127.0.0.1:6666 in a browser, as expected I see a HTTP GET request come through netcat (and my browser sits waiting in vain). If I go to my.external.ip.address:6666, however, nothing comes through at all and the browser displays 'could not connect to my.external.ip.address:6666'. I know that the port is correctly forwarded, as www.canyouseeme.org says port 6666 is open (and when netcat is not listening, that its closed). If I run netcat with -g my.adslmodem's.local.address to set the gateway address, I get the same behavior. Am I using this command line option correctly? Any insight as to what I'm doing wrong?

  Read the article

• How to browse Windows XP from Mac Finder when name disappears from finder

  - by Chris

  Occasionally, like right at this moment, I cannot access my windows share from my mac. Normally, it works, but every now and then, the computer name won't be displayed under SHARED in Finder. Rebooting the windows computer usually fixes this, but it's inconvenient. The Windows computer can see the Mac on the network. Is there a method of asking finder to poll for windows shares again, or "forcing" finder to look for "desktop"? I'm looking for the equivalent of \desktop in the address bar of a Windows computer. Thanks for the help.

  Read the article

• How to you create a wildcard DNS entry in Mac OS X 10.6 Server DNS GUI?

  - by Chris Altman

  The GUI does not accept "*". How, through the GUI, do I create a wildcard subdomain?

  Read the article

• SPF record for Gmail?

  - by Chris

  I have DNS, with a SPF TXT record, configured for a domain name. The primary user of the domain name now needs to be able to send both from our SMTP servers, and also from her GMail account. I've seen all the information about adding "include:_spf.google.com" to the SPF TXT record, but, as I look into it, it appears that record is outdated. In particular, I had the user send me a test message, and note that it was: Received: from mail-la0-f50.google.com (mail-la0-f50.google.com [209.85.215.50]) However, _spf.google.com doesn't list that IP address: $ dig +short _spf.google.com txt "v=spf1 ip4:216.239.32.0/19 ip4:64.233.160.0/19 ip4:66.249.80.0/20 ip4:72.14.192.0/18 ip4:209.85.128.0/17 ip4:66.102.0.0/20 ip4:74.125.0.0/16 ip4:64.18.0.0/20 ip4:207.126.144.0/20 ip4:173.194.0.0/16 ?all" (Note that a 209.85.21*8*.0 network is listed, but not 209.85.21*5*.0.) Is there a better way to enable sending from GMail? This user sends to at least one recipient with a strict SPF policy that bounces mail not from a designated host... Many thanks!

  Read the article

• Moving SharePoint 2010 to a new domain

  - by Chris

  I have a small SharePoint 2010 farm (1 WFE / App Server & 1 SQL server) Our organisation is currently mirgrating to our holding company's global domain, so we now have a new local DC on site with trusts between the current domain and the new domain. I am going to need to move our SP Farm to the new domain and possibly rename servers to fit into the global naming convention (we are trying to avoid this at the moment, but might become a requirement) If there a way to script (stsadm / powershell) the user profiles and permission accross to the new domain? and on the server side, is it as simple as joining the servers to the new domain and updating all the service / farm accounts to accounts on new domain? I have googled this a bit, but everything I have found so far refers to MOSS 2007 or earlier. Any help / advise would be appreciated.

  Read the article

• Cisco asa 5505 locks up / unresponsive

  - by Chris

  We have a cisco asa 5505 that's new (in service for about 2 months) running 7.2(4) software. Every day around 10a it locks up for approx 10 minutes. We're monitoring it via snmp with stg, and snmp doesn't respond during that time. There's no output in the 'show crash' output. Internet connectivity is also dropped. Wondering if anyone else has seen this and what the fix might be. Currently we're looking at upgrading software, but will need memory upgrade for that. We've forced the speed and duplex on the internal and external interfaces, but the problem is still occurring. It's connected on the internal lan to a netgear 724 gige switch.

  Read the article

• Help replacing old Windows 2003 SBS DC with a Win2008 Standard Edition DC

  - by Chris

  Objective: Trying to replace a Windows 2003 SBS domain controller with a windows server 2008 Standard Edition Domain Controller. What I did: used ADPREP. Then all user accounts and OUs are successfully replicated into the 2008 server. I have also managed to transfer all the DC roles (operations master,schema,pdc) into the Server 2008. I have also used NETDOM QUERY FSMO . It displayed that all the roles transferred to the 2008 server. Problem: When I am trying to demote the windows 2003 SBS server using DCPROMO, the message is “No other Active Directory for this domain can be contacted”. I also tried shutting down the 2003 server. Users can login into the domain but they have trouble finding SHARED folders. Can someone help me find out what I did wrong ? Need a little push in the right direction here. Thank you very much ?

  Read the article

• Bluetooth not seeing mouse (Fedora)

  - by Chris

  I have a Lenovo S10 'netbook' that I've installed Fedora 17 ("LXDE spin") on. So far pretty much everything works great, except, the on-board Bluetooth. lsusb shows the controller present (0a5c:2101 Broadcom Corp. Bluetooth Controller), hcitool dev shows hci0 present, but when I put my mouse ("Lenovo Bluetooth Laser Mouse," which works perfectly paired with a MacBook Pro, MacBook Air, Mac mini, and Lenovo SL500 (with a USB dongle; running Windows 7)) into pairing mode and run hcitool scan (reports "Scanning ..." and, without further information or error message, returns to the shell prompt), blueman-manager, or bluetooth-wizard (from the gnome-bluetooth package) and try to detect the mouse, I get nothing... Frustrating! Thanks anyone who can point me in the right direction!

  Read the article

• Recommendations for screen-capture tool that retains menus and mouse pointer

  - by Chris Farmer

  There are several screen capture tool questions already on this site, but I think I have a slight tweak to the usual. I'd like a handy screen capture utility that can: Run in Windows 7 Capture a sub-region of the screen Show the current state of the mouse cursor and any active menus I'd like to use it for writing docs that refer to specific application menu items. I like the built-in snipping tool in Windows 7, but the act of using it dismisses my menus, and it doesn't get the mouse cursor either. Do any such tools exist? EDIT: Ahh, I wasn't familiar with the "delayed capture" options of these tools, but they all seem to fit the bill. Thanks!

  Read the article

• Windows 7 - cancel mirror synchronisation

  - by Chris W

  I've got basic disk OS managed disk mirroring setup in Windows 7 for a couple of volumes. After a power failure the mirrors are currently resynching. These are only small volumes of data but the sync has not completed after more than 24 hours. Is there any way to stop this as it's driving me nuts? I need to get the machine back to a usable state to get some work done but it's a bit of a dog whilst this synch is going on. I've tried removing the mirrors but it won't let me do that whilst the re-sync is in progress.

  Read the article

• Windows 7 - cancel mirror synchronisation

  - by Chris W

  I've got basic disk OS managed disk mirroring setup in Windows 7 for a couple of volumes. After a power failure the mirrors are currently resynching. These are only small volumes of data but the sync has not completed after more than 24 hours. Is there any way to stop this as it's driving me nuts? I need to get the machine back to a usable state to get some work done but it's a bit of a dog whilst this synch is going on. I've tried removing the mirrors but it won't let me do that whilst the re-sync is in progress.

  Read the article

• Applications don't see mapped network drive after waking from sleep

  - by Chris

  I have a network share mapped as a drive letter on a Windows 7 PC that's part of a simple home network. When I wake the PC from sleep, Explorer sometimes says the drive is disconnected. Doubleclicking the drive connects it instantly, as far as Explorer is concerned. But some other applications don't see the drive unless I take additional steps (e.g., navigate to the drive in an "Open..." dialog). Is there any way to get the drive to be connected for all purposes immediately when resuming from standby? I've found the "Always wait for the network at computer startup and logon" item in Group Policy, but I'm not sure what the setting does or whether it would fix this problem. I have network discovery enabled and un-firewalled.

  Read the article

• Windows XP dual screen problems, user account related

  - by Chris

  I have had this issue with a few laptops now and it looks like it is some sort of user account problem. Specifics of the system are: Dell Laptop Windows XP Pro SP3 Non-domain member computer DLP Projector connected to laptop via VGA I use this setup almost daily to do presentations, always the mirrored display mode where I can see on the laptop monitor the same thing that is displayed on the projector. Today, when I boot up, I get the mirrored display at the login screen, but after I log in, it switches to Extended Desktop (like two desktops side-by-side). Fn+F8 just cycles through all the normal settings except the mirrored display. I created a new user account on the computer and it performs normally. Mirrored display works as normal. I have run into this about 4 times now and it always can be solved by creating a new user account on the computer, and then all is well. I would like to either: 1. Find a way to reset the customized settings for a specific user account which would hopefully make this go away, or 2. Find the specific setting that causes this so that I can easily fix it when the problem comes up. Creating new user accounts is kind of a pain and a easy fix must be out there somewhere.

  Read the article

• How can I make WinXP bind to ports other than 1025-5000 for outgoing TCP connections?

  - by Chris Dolan

  (I originally posted a similar question on StackOverflow but readers recommended I post here instead) When you create outgoing TCP connections, most applications let the operating system choose which port to use. Most OSes use the IANA recommended dynamic port range of 49152-65535 for this purpose. But in Windows 2003 and earlier (including XP) Microsoft uses ports 1025-5000. Microsoft lets you change the high end of this range via the MaxUserPort TcpIP registry setting, but I see no way to change the low end. I need to have port 4160 free for incoming connections and on rare occasions an outgoing connection steals that port from me before I bind that port.

  Read the article

• Alternatives to ntbackup

  - by Chris J

  Is anyone aware of any good (for a given value of "good") alternatives to ntbackup? There's a few quirks with ntbackup that I still find odd, and occasionally (and for no obvious reason) ntbackup just doesn't back up - usually complaining about that the wrong tape's inserted even though it's been told to just use the tape that's in the drive regardless. I've experiemented with cygwin's tar and cpio and Win32 ports of these utilities, but I've not had any luck getting them to see the tape device (so if someone does use these utilities to write to a tape device, also be interested to know how). Essentially all I'm looking for is a reliable program that I can tell to back-up a list of locations to the tape, and not to care about anything like formatting tapes, or sticking volume labels on them (and conversely then makes it fairly straightforward to restore off as well). On the flip-side, I don't want something that will attempt to manage our tapes. Don't get me wrong here -- ntbackup can do the job, but its quirks are making look at possible alternatives. Any suggestions? If it's open source, even better.

  Read the article

• Backup Exec 12.5 or 2010? [closed]

  - by Chris Thorpe

  Backup Exec 2010 has just dropped, and I'm about to implement a new BEWS infrastructure, complete with CALs and new central servers. When I specced this up last year, I ignored 2010 and focused on Backup Exec 12.5, since it's a mature product. In previous experience, major released of BE had numerous technical issues and seemed to improve significantly at the first service pack. However, our refresh cycle on the backup infrastructure is slow, the main driver usually being lack of support for some new server type (in this case, ESX has driven our current upgrade need). With this in mind, I'm wondering if Backup Exec 2010 should be my first choice, as it'll last longer under current support than 12.5, which will approach EOL soon. Has anyone got any perspective they could add to this? Right now, I'm leaning towards biting the bullet and going with 2010.

  Read the article

• Struggling to set-up NLB cluster

  - by Chris W

  I'm trying to set up NLB on a couple of Windows 2008 R2 virtual servers running on top of Hyper V R2. The servers each have a single vNIC for LAN access (and a second vNIC for SAN access). I'm setting up the cluster to use Multicast mode. The vNICs are each set to allow MAC spoofing. Essentially I'm finding that i can add SERVER1 as a host and it will pick up and respond to the cluster IP from a remote subnet. If I then 'stop' the node in NLB manager it still responds when I would expect it to stop answering on that IP. If I recreate the cluster and add SERVER2 as the first host, the wizard completes correctly and an IPCONFIG on the server shows that it now has the cluster IP but I can't ping the cluster IP from a remote subnet but I can from another machine on the same subnet. As a final test - with both servers in the cluster, pinging from another machine on the same subnet I still get a response from the cluster IP when both nodes are stopped according to the NLB manager. The two VMs are sat on the same physical blade and are built up exactly the same as they'll be used as SharePoint web front end servers. I'm at a loss as to what could be wrong with the second VM that prevents it taking on the address just as the sole node in the cluster, never mind the strange behaviour of the cluster when I stop/start nodes.

  Read the article

• What are the differences between google app mail, and plain ol' [email protected] forwarding to gmail ac

  - by Chris Adams

  I currently have an email address, [email protected], that I currently use to forward to a gmail account that I've used for years. I currently have it set, so I can send email from my [email protected] instead of [email protected]. This is done through the web ui on my current domain name, provider, gandi.net. What are the main differences between this arrangement, and setting up a Google Apps for your domain setup, where I'm explicitly listing in the dns records to point records to point to Google's app mail server?

  Read the article

• What are the differences between google app mail, and plain ol' [email protected] forwarding to gmail ac

  - by Chris Adams

  I currently have an email address, [email protected], that I currently use to forward to a gmail account that I've used for years. I currently have it set, so I can send email from my [email protected] instead of [email protected]. This is done through the web ui on my current domain name, provider, gandi.net. What are the main differences between this arrangement, and setting up a Google Apps for your domain setup, where I'm explicitly listing in the dns records to point records to point to Google's app mail server?

  Read the article

• Enable Soap for PHP 5.5.x on CentOS 6.5

  - by Chris Mancini

  Unfortunately I have to support soap on my server for the Fedex webservice. I recompiled PHP enabling support and it works via CLI but not PHP-fpm. They both point to the same ini file and both show the module loaded, but only CLI shows the configuration values. Output of php -i | grep -i soap Configuration File (php.ini) Path => /usr/local/etc Loaded Configuration File => /usr/local/etc/php.ini Configure Command => './configure' '--prefix=/usr/local' '--with-config-file-path=/usr/local/etc' '--with-config-file-scan-dir=/usr/local/etc/php_user/' '--enable-fpm' '--enable-ftp' '--enable-libxml' '--enable-mbstring' '--enable-pdo' '--enable-soap' '--enable-sockets=shared' '--enable-zip' '--with-curl' '--with-fpm-group=nginx' '--with-fpm-user=nginx' '--with-freetype-dir=/usr/lib64/' '--with-gd' '--with-jpeg-dir=/usr/lib64/' '--with-libdir=lib64' '--with-mcrypt' '--with-openssl' '--with-pdo-mysql' '--with-pear' '--with-readline' '--with-tidy' '--with-xsl' '--with-zlib' '--without-pdo-sqlite' '--without-sqlite3' soap Soap Client => enabled Soap Server => enabled soap.wsdl_cache => 1 => 1 soap.wsdl_cache_dir => /tmp => /tmp soap.wsdl_cache_enabled => 1 => 1 soap.wsdl_cache_limit => 5 => 5 soap.wsdl_cache_ttl => 86400 => 86400 Output from php-fpm phpinfo(): Configuration File (php.ini) Path /usr/local/etc Loaded Configuration File /usr/local/etc/php.ini SOAP Brad Lafountain, Shane Caraveo, Dmitry Stogov Please help, I have tried so many things...

  Read the article

• Tool to modify properties/metadata of a PDF? i.e. Change "Title", "Author"? Sony Reader showing som

  - by Chris W. Rea

  I own a Sony Reader PRS-600 ebook reader. I bought a ton of Manning Publications ebooks (DRM-free) recently. Many of the books are PDFs since not all the ones I wanted are available in epub format. The problem: Some of the PDF books I purchased have incorrect or missing metadata. Making things worse, the Sony Reader only displays the "Title" from the PDF metadata when displaying book titles in the reader's collection of books! The Reader doesn't display the filename. So, even though I have a PDF informatively named "Windows PowerShell In Action.pdf", it shows up as "untitled" in the Reader. Imagine how useful the Reader's list of book titles becomes when many are just "untitled" or "unnamed document" ! Yes, it is maddening. So – short of expecting the publisher to fix the files or Sony to add a filename-based list instead, I'm looking for a way to fix the PDF metadata. I can view the metadata with Adobe Reader, but it doesn't permit modification of the properties. Leading to: Question: Is there a tool – free, or cheap – and either for PC or Mac, that can modify the properties / metadata of a DRM-free PDF document? I want to correct "Title" and "Author" fields, specifically.

  Read the article

• How do I handle mysql replication in EC2 using private IPs?

  - by chris

  I am trying to set up a mysql master/slave configuration in two EC2 instances. However, every time I reboot an instance, the IP address (and hostname) changes. I could assign an Elastic IP address, but would prefer to use the internal IP address. I can't be the first person to do this, but I can't seem to find a solution. There are a lot of "getting started" guides, but none of them mention how to handle changing IP addresses. So what are the best practices to manage master/slave replication in EC2?

  Read the article

< Previous Page | 42 43 44 45 46 47 48 49 50 51 52 53  | Next Page >