Search Results

Search found 7502 results on 301 pages for 'defective hardware'.

Page 46/301 | < Previous Page | 42 43 44 45 46 47 48 49 50 51 52 53  | Next Page >

  • macbook pro for developer

    - by Michael Ellick Ang
    Which of the following choices would be more beneficial to developers ? 13 inch Macbook Pro, Core 2 Duo, 4 GB Memory, 128 GB SSD - $1550 - Faster Storage 13 inch Macbook Pro, Core 2 Duo, 8 GB Memory, 250 GB HD - $1600 - More Memory 15 inch Macbook Pro, Core i5, 4 GB Memory, 320 GB HD - $1800 - Better CPU Thanks.

    Read the article

  • System shuts down immediately after few sconds

    - by Anil
    I have a computer with following specification and was working fine after re-installing the system and refitting sink fan unit. Recently it shuts down automatically after a few seconds. I checked PSU by shorting pin no.s 13 & 14 as well as 14 & 15. It worked well means the PSU fan moves. But I never checked the voltages at different wires. I refitted the heat sink fan by applying thermal paste. but it behaved the same. Again I refitted the Heat Sink Fan, then it worked for 2 minutes and again shut down. Now it shuts down immediately after switching on. Mother board : M26GTM-3VP CPU : AMD athlon PSU : 450 watt Can anyone help?

    Read the article

  • iBook G4 has black screen on boot

    - by Jonathan Patt
    I have an old iBook G4 (A1054, 1.2 GHz) which has issues when it loses power or is shut off. If the battery drains—which happens quickly, as its remaining capacity is very low—it enters some sort of weird mode where it's not really awake (the screen is black, can't do anything) but it has no pulsing light indicating it's asleep either. The only way to exit this mode is to hold down the power button for ten seconds until it shuts off, and attempt rebooting it. Almost always, however, it makes the sound of the optical drive starting up, and then doesn't continue past that point. The screen doesn't come on, and things like resetting PRAM don't work. Occasionally a fan comes on loudly for a second or two. This sometimes seems to correspond with my pressing down on the rear-right casing, above the power jack. In the past, shutting it off, disconnecting it from power, removing the battery and waiting for 30 minutes would do the trick, but this time I have done that several times, letting it sit for up to several hours before retrying, to no avail. Any ideas?

    Read the article

  • Does HDMI cable "quality" actually affect transmission?

    - by TheDeeno
    I really don't want to pay a ridiculous price for a "name brand" HDMI cable if it doesn't really do anything for me. I'm just curious: now that most transmission is digital (packetized) is there such a thing as a "quality" cable? I suspect that if the cable works at all, I'm safe saying I have a quality connection. I just want to double check. Some of these reviewers complain that generic cables "create noise, lack bandwidth, can't handle X, etc". I'm skeptical of these reviews. If the logic for HDMI cables and quality can be applied to cables in general, please elaborate on that as well.

    Read the article

  • How to wipe an IPod with DBAN

    - by Matt Powers
    I'm looking to use a utility such as Darik's Boot And Nuke (www.dban.org) to wipe my iPod (classic fifth generation) so I can sell it on Ebay (without having to worry about my data being recovered.) Any suggestions on how to do this?

    Read the article

  • Computer and internet use on a boat?

    - by dlamblin
    Let's assume that I seriously would like to be able to use my computer as easily and as carefreely while on a boat as I do while at home. In short, if I were on a boat for extended periods, such as two weeks at a time and occasionally over a few days out of port (this would be a 2 person sailing vessel), what would my options be for power, durability, and of course, internet access? I want more than just email, as I will likely keep doing a tad of development, and will be looking at google earth from time to time. I am already assuming that we're going with some kind of laptop, maybe even a macbook pro 12". I personally feel that netbooks are underpowered. And the last computer that I got a boat-friendly rating for was a ZX Spectrum, which was before the internet, and was likely due to it's 12vdc-happiness.

    Read the article

  • Recommend a wireless PCI card for Windows 7

    - by Dan
    I have a crummy RT2500-based 11g card which does work in Win7 with the Vista driver (3.2.0.0) but it dies about every two hours or so. Googling around has led me to conclude that Ralink drivers are basically borked, and that I need something else for a stable connection. Can anyone recommend a suitable wireless adapter? It needs to be: 802.11g - draft-N nice but not at all essential. PCI - I already have far more USB devices than can possibly be good for me. Very reliable. Money isn't an object within reason. All input gratefully received!

    Read the article

  • Keyboards for kiosk/outdoor/abusive environments?

    - by Justin Scott
    We have a bunch of kiosks deployed into let's just say... abusive environments. The enclosures we had built are touch as nails, and the HP thin client computers are working great. The keyboards that were purchased for the project have been nothing but problems. They're a generic brand direct from a Chinese manufacturer. They're stainless steel with keys mounted from the inside and a trackball, but they've been deployed for only a month and nearly 20% of them are already out of service due to keys sticking, keys not working, trackball problems, water damage, and a variety of other issues. Are there any kiosk keyboards that can take a beating without breaking so easily? Ideally they should be tamper-proof (keys can't be removed), waterproof, lettering should be engraved into the keys, trackball, option for a single mouse button would be nice, and some protection to keep debris out of the keys so they don't stick (sticky cleaners, food debris, etc.). Does such a beast exist? Everything we've looked at is susceptible to easy damage. We need the M1 Abrams Tank of keyboards. Any suggestions?

    Read the article

  • restoring a failed SBS 2000 box...

    - by Brad Pears
    Hi there, I read a post where you had mentioned you have had a PERC card blow up on you in an SBS box... I've got a similar situation where one of my RAID drives failed and then the power supply failed before I could replace the drive... I then replaced the power supply and the failed drive and reconfigured the RAID array. I had a recent full backup of the my Win2k SBS's C: drive stored on my SYmantec backup exec server so I installed win2K server on the c: partition and then once I had that up and running, installed the backup exec agent so as to do a restore of the entire c drive including system state. THis all worked just fine, until I had to reboot. I received an "incorrect drive configuration" error and then it hangs. I figure that likely makes sense becasue I think my RAID array is configured slightly different now in that the partitions may be sizeded ever so slightly differently now than they were before I think... Is there a way I can just restore from my backup BUT maybe exclude some of the registry and hidden boot files it wants to restore so that it is booting with the current configuration now active on that machine - not the pre blow up configuration files? I also read a post that indicated you might have to install the exact same service pack etc... etc.. before attemting a restore but that does not make sense to me being as the entire c drive contents are going to be overwritten by the restore anyway? THe basic OS install is just to be able to get the backup exec agent installed . I can;t understand why one would need to install the exact same SP level. CAn you shed some light on what I might be able to do to get this thing up and running? Thanks,Brad

    Read the article

  • White Screen of Death

    - by cust0s
    The other night I updated my iTunes to the latest version (through Software Update) when I came to turn on my computer I was greeted with the dreaded white screen of death. I use an early 2008 iMac 24". I've tried the basic things, unplugging/turning off accessories, trying to boot from the install disk, reseting pram, etc, etc. Still no luck and no change what-so-ever. All I've been able to ascertain that my keyboard still works (by ejecting). I should point out that I did recently replace my Hard drive with a Western Digital Black 500GB (though the computer is well out of warrenty) and I'm a little concerned that the problem could be the screen.

    Read the article

  • smartctl -t long isn't finishing

    - by xenoterracide
    I been running smartctl -t long on a drive for about 2 days now and it seems to be stalled at 10%. short and conveyance both passed. I have to send 1 of 2 drives purchased back I found badblocks with badblocks (none on this drive and I'ts made over a pass already). I'm just wondering if I should be concerned about this. smartctl 5.39.1 2010-01-28 r3054 [x86_64-unknown-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Device Model: WDC WD10EARS-00Y5B1 Serial Number: WD-WMAV51582123 Firmware Version: 80.00A80 User Capacity: 1,000,204,886,016 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 8 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Mon May 10 22:19:52 2010 EDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 241) Self-test routine in progress... 10% of test remaining. Total time to complete Offline data collection: (20100) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 231) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x3031) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 2 3 Spin_Up_Time 0x0027 131 131 021 Pre-fail Always - 6408 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 12 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 148 10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 10 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 7 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 174 194 Temperature_Celsius 0x0022 106 102 000 Old_age Always - 41 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Conveyance offline Completed without error 00% 99 - # 2 Extended offline Interrupted (host reset) 10% 30 - # 3 Short offline Completed without error 00% 0 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.

    Read the article

  • LSI 9260-8i w/ 6 256gb SSDs - RAID 5, 6, 10, or bad idea overall?

    - by Michael Pearson
    We're provisioning a new production server for our reasonably busy website. Our choice of host have available a 6 drive configuration with a LSI 9260-8i card. My initial thought was to fill all six bays with SSDs (Intel 520 256gb) and set them up in RAID. Good, bad, or terrible idea? Can the card handle it? Should we be using RAID 5, 6 or 10? This would be the first time the provider have filled all six slots for this rackmount with SSDs, so they're a bit hesitant. I'm wondering if somebody else with this card has done something similar in a production environment. We do about 43gb of writes per day and currently use about 300gb of storage. The server acts as webserver, database, and image store for approx 1 million files. The plan is to underprovision the SSDs by approximately 10% to 20% to increase their overall lifespan & performance. The fallback option is 2x480gb SSDs in RAID 1 and another 2x1TB HDDs in RAID 1. The motivation behind this is that the server rental cost difference between 2xSSDs and 6xSSDs is minimal (compared to the overall cost of the rental). We do not have any special high-IOPs requirements. However, if the configuration is known to work, I don't see a good reason to not use it and not have to worry about having separate 'fast and small' and 'slow and large' disks.

    Read the article

  • Best DVD Burner?

    - by davr
    I've got a fairly old generic DVD burner that doesn't support dual layer, and I'm looking to upgrade since they seem so cheap these days. Does it matter what model I get, or is it such that I can just buy whatever happens to be on sale today? Are there advantages to a certain brand over another? Basically I just want something that's fast, cheap, and produces good quality burns. Any advice would be helpful.

    Read the article

  • CPU Cooling with Heatsinks

    - by Jason Tzen
    I've constructed a server that uses 2 Xeon E5-2620 CPUs and per Intel's recommendation I'm in the process of ordering heatsinks for each and I'm slightly concerned about thermal management. The case I'm using is well ventilated (the Coolermaster Cosmos II) but I have a few concerns regarding the adequacy of the heatsinks recommended by the MB manufacturer (Supermicro CPU HeatSink SNK-P0048PS). As you can see these heatsinks come without a fan and I'm wondering if they can keep the Xeons within their normal temperature range... Due to the low volume of literature on the topic I wasn't able to find anything conclusive.

    Read the article

  • Configure EasyBox (Vodafone) with DynDNS

    - by furtelwart
    How can I configure an EasyBox A601 WLAN (from Arcor resp. Vodafone) to send the IP always to DynDNS? I entered the following: Dynamic DNS [X] Diensteanbieter (DynDNS.org) Domänenname mysupersecrethost.dyndns.org (as specified in "My Host" section Konto / E-mail myaccountname Passwort mysupersecretpassword The update does not work anymore, so that my IP is not correct. The firmware is the newest available: Firmware Version: 10.02.006 (01.12.2008-11:11:59) Thanks for any hints!

    Read the article

  • Why did my power supply fry itself?

    - by ULTRA_POROV
    I am in europe. There was a switch on my psu that could switch the voltage between 230v and 130v (not 100% sure). In europe we use 230. I switched the psu to 110 and turned it on. Several sparks and a power failiure resulted, the psu was fried. Can someone explain why this happened. I was assuming that because the system was using 230 and the psu only draws 130 it would be safe cause it's less. I guess i was wrong. Can someone explain me the physics behind this.

    Read the article

  • Can a virus corrupt a hard disk?

    - by sundar
    Shorter version: Hard disk corrupt, vendor claims warranty does not apply since it was "due to a virus" and "problems due to software are not covered under the warranty". Longer version: My Dell laptop recently refused to boot, and all attempts to 'repair' the Vista installation using the provided installation CD failed. I called up Dell support, and a representative took the laptop and after a day said the hard disk is corrupt. When I tried to ask for a replacement under the warranty, an official replied that the corruption was due to a virus, and "problems due to software are not covered under the warranty". Now, I get a doubt that he's trying to avoid having to provide it under the warranty. Is it possible for a hard disk to get corrupt due to a virus? If yes, is there any way we can detect it was due to a virus (as he claims to have detected)?

    Read the article

  • Monitor for HD video editing

    - by Kato
    I have been researching for days and nights on a good monitor to buy for a Mac Pro with an ATI Radeon 2600 XT (256mb). It will be used extensively for HD video editing (1080p) and photo editing, and likely also digital/3D animation next year(a lot of FCP + CS4). I am a student, so money is a little bit of an issue, but I want something that I'll be able to use semi-professionally after I'm done school, and am willing to finance something if it is worth the cost. I'm HOPING for something under $1000 though. The IPS Ultrasharps from Dell seem to be getting good reviews from other video editors. Accurate colour correction is a concern for me (hopefully something that covers Adobe spectrum), as well as a decent response time, HD resolutions, and DVI port. Also something with good gradient/definition in black areas, as this is difficult for editing on most LCDs. 1X1 pixel, brightness, good DVD playback etc. Hopefully this is not impossible to find for under $2000!

    Read the article

  • Do I need to rebuild the array after putting in a new hot spare?

    - by Shade34321
    So my experience with RAID is minimal. So I figured I'd come and ask here. We have a 16 drive RAID system that have 15 drives in RAID 5 with a hot spare left over. Recently one of the drives in the RAID was giving errors so I cloned it over to the hot spare and put a new drive in it's spot. I made the new drive the hot spare as I was told. I was told to rebuild the array after putting in the new drive as a hot spare so I tried and wasn't able to. So my question is do I need to rebuild it and if so why did it tell me I couldn't. Thanks! UPDATE: So I've come back up to work and looked at the RAID and it pulled in the hot spare into the raid and kicked out another drive.

    Read the article

  • Should I install Windows 7 on a 3 years old PC?

    - by Jitendra vyas
    This is my PC configuration, Should I upgrade my Windows XP to Windows 7. Currently I'm using Windows XP SP3 32 bit. Now will I get same performance or better performance or bad performance if I install Windows 7 on this system? Or would sticking with XP be better? Memory (RAM): 1472 MB DDR RAM (not DDR 2) CPU Info: AMD Sempron(tm) Processor 2500+ CPU Speed: 1398.7 MHz Sound card: Vinyl AC'97 Audio (WAVE) Display Adapters: VIA/S3G UniChrome Pro IGP | NetMeeting driver | RDPDD Chained DD Network Adapters: Bluetooth Device (Personal Area Network) | WAN (PPP/SLIP) Interface Hard Disks: 300 GB SATA HDD Manufacturer: Phoenix Technologies, LTD Product Make: MS-7142 AC Power Status: OnLine BIOS Info: AT/AT COMPATIBLE | 01/18/06 | VIAK8M - 42302e31 Motherboard: MICRO-STAR INTERNATIONAL CO., LTD MS-7142 Modem: ZTE USB Modem FFFE CDMA :

    Read the article

  • Software RAID 10 on Linux

    - by vpetersson
    For a long time, I've been thinking about switching to RAID 10 on a few servers. Now that Ubuntu 10.04 LTS is live, it's time for an upgrade. The servers I'm using are HP Proliant ML115 (very good value). It has four internal 3.5" slots. I'm currently using one drive for the system and a RAID5 array (software) for the remaining three disks. The problem is that this creates a single-point-of-failure on the boot drive. Hence I'd like to switch to a RAID10 array, as it would give me both better I/O performance and more reliability. The problem is only that good controller cards that supports RAID10 (such as 3Ware) cost almost as much as the server itself. Moreover software-RAID10 does not seem to work very well with Grub. What is your advice? Should I just keep running RAID5? Have anyone been able to successfully install a software RAID10 without boot issues?

    Read the article

< Previous Page | 42 43 44 45 46 47 48 49 50 51 52 53  | Next Page >