Search Results

Search found 2675 results on 107 pages for 'disaster recovery'.

Page 46/107 | < Previous Page | 42 43 44 45 46 47 48 49 50 51 52 53  | Next Page >

• Windows 7 Not Starting and System Repair Not Loading

  - by Mark

  I have a Dell Inspiron 1545 running Windows 7 When turning on my PC I keep receiving a black screen with the option to use System Repair or Start Normally. Both options lead me to the System Repair background except no matter how long I wait the system restore options never show up. Choosing F8 and running all of the options including safe mode encounters the same result above. I tried to to use 2 system recovery disks 32x and 64x I downloaded and both lead to similiar results. When I choose System Repair running from the disk the System Repair Question asking to select a language pops ups but after this no matter how long I wait no other options appear. Next after restarting and selecting F8 (after hitting f12 and running from CD) I choose 'Run From Safe Mode with Command Prompt' I am able to run all of the options from System Restore with differing results: Startup Repair: Choosing this ends up in system repair indefinitely (left running 12 hrs) System Restore: Does Nothing. PC thinks for a second and then stops. When selecting ShutDown I see an error message stating there are no restore points. System Image Recovery: Service Cannot be started in Safe Mode Windows Memory Diagnostic: Runs test but then leads to system repair background which never loads system repair Command Prompt: chkdsk /r -Cannot Lock Current Drive...write protected. chkdsk /f -Cannot Lock Current Drive...write protected. bootcfg - Cannot open Boot.Ini file bootcfg - Ran all 3 (rebuildBcd, FixMbr and Fixboot) but PC still goes to System Repair background with no repair options popping up upon restart (without recovery CD). I'm on the verge of purchasing a boot utility disk for $50 unless there is anything else short of "take it to a computer shop" that somebody can suggest I try.

  Read the article

• Mysql - innoDb - is in the future! Current system log sequence number

  - by Ward Loockx

  I have this error in my syslog. I restored an older dump to solve this problem, after some reading. Now The errors in syslog are far less than before. But still a few times an hour I get Sep 1 14:23:29 homer mysqld: 120901 14:23:29 InnoDB: Error: page 96637 log sequence number 7 1223357717 Sep 1 14:23:29 homer mysqld: InnoDB: is in the future! Current system log sequence number 6 647303887. Sep 1 14:23:29 homer mysqld: InnoDB: Your database may be corrupt or you may have copied the InnoDB Sep 1 14:23:29 homer mysqld: InnoDB: tablespace but not the InnoDB log files. See Sep 1 14:23:29 homer mysqld: InnoDB: http://dev.mysql.com/doc/refman/5.1/en/forcing-recovery.html Sep 1 14:23:29 homer mysqld: InnoDB: for more information. Sep 1 14:23:29 homer mysqld: 120901 14:23:29 InnoDB: Error: page 96638 log sequence number 8 150027924 Sep 1 14:23:29 homer mysqld: InnoDB: is in the future! Current system log sequence number 6 647303887. Sep 1 14:23:29 homer mysqld: InnoDB: Your database may be corrupt or you may have copied the InnoDB Sep 1 14:23:29 homer mysqld: InnoDB: tablespace but not the InnoDB log files. See Sep 1 14:23:29 homer mysqld: InnoDB: http://dev.mysql.com/doc/refman/5.1/en/forcing-recovery.html Sep 1 14:23:29 homer mysqld: InnoDB: for more information. Sep 1 14:23:29 homer mysqld: 120901 14:23:29 InnoDB: Error: page 96639 log sequence number 7 4208567151 Sep 1 14:23:29 homer mysqld: InnoDB: is in the future! Current system log sequence number 6 647303887. Sep 1 14:23:29 homer mysqld: InnoDB: Your database may be corrupt or you may have copied the InnoDB Sep 1 14:23:29 homer mysqld: InnoDB: tablespace but not the InnoDB log files. See Sep 1 14:23:29 homer mysqld: InnoDB: http://dev.mysql.com/doc/refman/5.1/en/forcing-recovery.html Sep 1 14:23:29 homer mysqld: InnoDB: for more information. Anybody that knows how I can track what database is causing this issue? And how to fix?

  Read the article

• What's the best way to completely remove everything from a computer, without re-installing?

  - by Connor W

  I have a friend who wants to sell their computer, but obviously all personal information and software that it is on it needs to be removed before doing so. Usually I would format and reinstall it, but I cannot easily get hold of the required XP DVDs and I'm not 100% sure the serial number is stuck on the case as usual so getting hold of it will probably require more effort than I'm prepared to spend. So, what's the best and quickest way to remove and uninstall everything from the PC without reinstalling it? Thanks. EDITS: I'm looking to remove things like Internet History and all installed programs, too. I know how to remove the history and each individual program, but that could take hours. The machine is not branded and therefore there is no website I can go to download recovery software. There is no recovery partition on the computer and I'm not aware of any recovery DVDs for it either. I can only assume it was installed from a retail copy, and therefore there is no way to recover it to factory settings. It needs to have XP installed, not any distribution of Linux. Like most average people, the person getting the computer will not understand what to do with a computer that doesn't have Windows installed, and software like Office does not work on Linux either. Buying another licence is not really an option either. She has just brought a laptop to replace the computer, so buying another licence for a computer that she's getting rid of doesn't really make sense. Thanks for all the help so far!

  Read the article

• mysqld crashes on any statement

  - by ??iu

  I restarted my slave to change configuration settings to skip reverse hostname lookup on connecting and to enable the slow query log. I edited /etc/my.cnf making only these changes, then restarted mysqld with /etc/init.d/mysql restart All appeared to be well but when I connect to msyqld remotely or locally though it connects okay a slight problem is that mysqld crashes whenever you try to issue any kind of statement. The client looks like: Reading table information for completion of table and column names You can turn off this feature to get a quicker startup with -A Welcome to the MySQL monitor. Commands end with ; or \g. Your MySQL connection id is 3 Server version: 5.1.31-1ubuntu2-log Type 'help;' or '\h' for help. Type '\c' to clear the buffer. mysql> show tables; ERROR 2006 (HY000): MySQL server has gone away No connection. Trying to reconnect... Connection id: 1 Current database: mydb ERROR 2006 (HY000): MySQL server has gone away No connection. Trying to reconnect... ERROR 2003 (HY000): Can't connect to MySQL server on 'xx.xx.xx.xx' (61) ERROR: Can't connect to the server ERROR 2006 (HY000): MySQL server has gone away No connection. Trying to reconnect... ERROR 2003 (HY000): Can't connect to MySQL server on 'xx.xx.xx.xx' (61) ERROR: Can't connect to the server ERROR 2006 (HY000): MySQL server has gone away Bus error The mysqld error log looks like: 101210 16:35:51 InnoDB: Error: (1500) Couldn't read the MAX(job_id) autoinc value from the index (PRIMARY). 101210 16:35:51 InnoDB: Assertion failure in thread 140245598570832 in file handler/ha_innodb.cc line 2595 InnoDB: Failing assertion: error == DB_SUCCESS InnoDB: We intentionally generate a memory trap. InnoDB: Submit a detailed bug report to http://bugs.mysql.com. InnoDB: If you get repeated assertion failures or crashes, even InnoDB: immediately after the mysqld startup, there may be InnoDB: corruption in the InnoDB tablespace. Please refer to InnoDB: http://dev.mysql.com/doc/refman/5.1/en/forcing-recovery.html InnoDB: about forcing recovery. 101210 16:35:51 - mysqld got signal 6 ; This could be because you hit a bug. It is also possible that this binary or one of the libraries it was linked against is corrupt, improperly built, or misconfigured. This error can also be caused by malfunctioning hardware. We will try our best to scrape up some info that will hopefully help diagnose the problem, but since we have already crashed, something is definitely wrong and this may fail. key_buffer_size=16777216 read_buffer_size=131072 max_used_connections=3 max_threads=600 threads_connected=3 It is possible that mysqld could use up to key_buffer_size + (read_buffer_size + sort_buffer_size)*max_threads = 1328077 K bytes of memory Hope that's ok; if not, decrease some variables in the equation. thd: 0x18209220 Attempting backtrace. You can use the following information to find out where mysqld died. If you see no messages after this, something went terribly wrong... stack_bottom = 0x7f8d791580d0 thread_stack 0x20000 /usr/sbin/mysqld(my_print_stacktrace+0x29) [0x8b4f89] /usr/sbin/mysqld(handle_segfault+0x383) [0x5f8f03] /lib/libpthread.so.0 [0x7f902a76a080] /lib/libc.so.6(gsignal+0x35) [0x7f90291f8fb5] /lib/libc.so.6(abort+0x183) [0x7f90291fabc3] /usr/sbin/mysqld(ha_innobase::open(char const*, int, unsigned int)+0x41b) [0x781f4b] /usr/sbin/mysqld(handler::ha_open(st_table*, char const*, int, int)+0x3f) [0x6db00f] /usr/sbin/mysqld(open_table_from_share(THD*, st_table_share*, char const*, unsigned int, unsigned int, unsigned int, st_table*, bool)+0x57a) [0x64760a] /usr/sbin/mysqld [0x63f281] /usr/sbin/mysqld(open_table(THD*, TABLE_LIST*, st_mem_root*, bool*, unsigned int)+0x626) [0x641e16] /usr/sbin/mysqld(open_tables(THD*, TABLE_LIST**, unsigned int*, unsigned int)+0x5db) [0x6429cb] /usr/sbin/mysqld(open_normal_and_derived_tables(THD*, TABLE_LIST*, unsigned int)+0x1e) [0x642b0e] /usr/sbin/mysqld(mysqld_list_fields(THD*, TABLE_LIST*, char const*)+0x22) [0x70b292] /usr/sbin/mysqld(dispatch_command(enum_server_command, THD*, char*, unsigned int)+0x146d) [0x60dc1d] /usr/sbin/mysqld(do_command(THD*)+0xe8) [0x60dda8] /usr/sbin/mysqld(handle_one_connection+0x226) [0x601426] /lib/libpthread.so.0 [0x7f902a7623ba] /lib/libc.so.6(clone+0x6d) [0x7f90292abfcd] Trying to get some variables. Some pointers may be invalid and cause the dump to abort... thd->query at 0x18213c70 = thd->thread_id=3 thd->killed=NOT_KILLED The manual page at http://dev.mysql.com/doc/mysql/en/crashing.html contains information that should help you find out what is causing the crash. 101210 16:35:51 mysqld_safe Number of processes running now: 0 101210 16:35:51 mysqld_safe mysqld restarted InnoDB: The log sequence number in ibdata files does not match InnoDB: the log sequence number in the ib_logfiles! 101210 16:35:54 InnoDB: Database was not shut down normally! InnoDB: Starting crash recovery. InnoDB: Reading tablespace information from the .ibd files... InnoDB: Restoring possible half-written data pages from the doublewrite InnoDB: buffer... 101210 16:35:56 InnoDB: Started; log sequence number 456 143528628 101210 16:35:56 [Warning] 'user' entry 'root@PSDB102' ignored in --skip-name-resolve mode. 101210 16:35:56 [Warning] Neither --relay-log nor --relay-log-index were used; so replication may break when this MySQL server acts as a slave and has his hostname changed!! Please use '--relay-log=mysqld-relay-bin' to avoid this problem. 101210 16:35:56 [Note] Event Scheduler: Loaded 0 events 101210 16:35:56 [Note] /usr/sbin/mysqld: ready for connections. Version: '5.1.31-1ubuntu2-log' socket: '/var/run/mysqld/mysqld.sock' port: 3306 (Ubuntu) 101210 16:36:11 InnoDB: Error: (1500) Couldn't read the MAX(job_id) autoinc value from the index (PRIMARY). 101210 16:36:11 InnoDB: Assertion failure in thread 139955151501648 in file handler/ha_innodb.cc line 2595 InnoDB: Failing assertion: error == DB_SUCCESS InnoDB: We intentionally generate a memory trap. InnoDB: Submit a detailed bug report to http://bugs.mysql.com. InnoDB: If you get repeated assertion failures or crashes, even InnoDB: immediately after the mysqld startup, there may be InnoDB: corruption in the InnoDB tablespace. Please refer to InnoDB: http://dev.mysql.com/doc/refman/5.1/en/forcing-recovery.html InnoDB: about forcing recovery. 101210 16:36:11 - mysqld got signal 6 ; This could be because you hit a bug. It is also possible that this binary or one of the libraries it was linked against is corrupt, improperly built, or misconfigured. This error can also be caused by malfunctioning hardware. We will try our best to scrape up some info that will hopefully help diagnose the problem, but since we have already crashed, something is definitely wrong and this may fail. key_buffer_size=16777216 read_buffer_size=131072 max_used_connections=1 max_threads=600 threads_connected=1 It is possible that mysqld could use up to key_buffer_size + (read_buffer_size + sort_buffer_size)*max_threads = 1328077 K bytes of memory Hope that's ok; if not, decrease some variables in the equation. thd: 0x18588720 Attempting backtrace. You can use the following information to find out where mysqld died. If you see no messages after this, something went terribly wrong... stack_bottom = 0x7f49d916f0d0 thread_stack 0x20000 /usr/sbin/mysqld(my_print_stacktrace+0x29) [0x8b4f89] /usr/sbin/mysqld(handle_segfault+0x383) [0x5f8f03] /lib/libpthread.so.0 [0x7f4c8a73f080] /lib/libc.so.6(gsignal+0x35) [0x7f4c891cdfb5] /lib/libc.so.6(abort+0x183) [0x7f4c891cfbc3] /usr/sbin/mysqld(ha_innobase::open(char const*, int, unsigned int)+0x41b) [0x781f4b] /usr/sbin/mysqld(handler::ha_open(st_table*, char const*, int, int)+0x3f) [0x6db00f] /usr/sbin/mysqld(open_table_from_share(THD*, st_table_share*, char const*, unsigned int, unsigned int, unsigned int, st_table*, bool)+0x57a) [0x64760a] /usr/sbin/mysqld [0x63f281] /usr/sbin/mysqld(open_table(THD*, TABLE_LIST*, st_mem_root*, bool*, unsigned int)+0x626) [0x641e16] /usr/sbin/mysqld(open_tables(THD*, TABLE_LIST**, unsigned int*, unsigned int)+0x5db) [0x6429cb] /usr/sbin/mysqld(open_normal_and_derived_tables(THD*, TABLE_LIST*, unsigned int)+0x1e) [0x642b0e] /usr/sbin/mysqld(mysqld_list_fields(THD*, TABLE_LIST*, char const*)+0x22) [0x70b292] /usr/sbin/mysqld(dispatch_command(enum_server_command, THD*, char*, unsigned int)+0x146d) [0x60dc1d] /usr/sbin/mysqld(do_command(THD*)+0xe8) [0x60dda8] /usr/sbin/mysqld(handle_one_connection+0x226) [0x601426] /lib/libpthread.so.0 [0x7f4c8a7373ba] /lib/libc.so.6(clone+0x6d) [0x7f4c89280fcd] Trying to get some variables. Some pointers may be invalid and cause the dump to abort... thd->query at 0x18599950 = thd->thread_id=1 thd->killed=NOT_KILLED The manual page at http://dev.mysql.com/doc/mysql/en/crashing.html contains information that should help you find out what is causing the crash. 101210 16:36:11 mysqld_safe Number of processes running now: 0 101210 16:36:11 mysqld_safe mysqld restarted The config is [mysqld_safe] socket = /var/run/mysqld/mysqld.sock nice = 0 [mysqld] innodb_file_per_table innodb_buffer_pool_size=10G innodb_log_buffer_size=4M innodb_flush_log_at_trx_commit=2 innodb_thread_concurrency=8 skip-slave-start server-id=3 # # * IMPORTANT # If you make changes to these settings and your system uses apparmor, you may # also need to also adjust /etc/apparmor.d/usr.sbin.mysqld. # user = mysql pid-file = /var/run/mysqld/mysqld.pid socket = /var/run/mysqld/mysqld.sock port = 3306 basedir = /usr datadir = /DB2/mysql tmpdir = /tmp skip-external-locking # # Instead of skip-networking the default is now to listen only on # localhost which is more compatible and is not less secure. #bind-address = 127.0.0.1 # # * Fine Tuning # key_buffer = 16M max_allowed_packet = 16M thread_stack = 128K thread_cache_size = 8 # This replaces the startup script and checks MyISAM tables if needed # the first time they are touched myisam-recover = BACKUP max_connections = 600 #table_cache = 64 #thread_concurrency = 10 # # * Query Cache Configuration # query_cache_limit = 1M query_cache_size = 32M # skip-federated slow-query-log skip-name-resolve Update: I followed the instructions as per http://dev.mysql.com/doc/refman/5.1/en/forcing-innodb-recovery.html and set innodb_force_recovery = 4 and the logs are showing a different error but the behavior is still the same: 101210 19:14:15 mysqld_safe mysqld restarted 101210 19:14:19 InnoDB: Started; log sequence number 456 143528628 InnoDB: !!! innodb_force_recovery is set to 4 !!! 101210 19:14:19 [Warning] 'user' entry 'root@PSDB102' ignored in --skip-name-resolve mode. 101210 19:14:19 [Warning] Neither --relay-log nor --relay-log-index were used; so replication may break when this MySQL server acts as a slave and has his hostname changed!! Please use '--relay-log=mysqld-relay-bin' to avoid this problem. 101210 19:14:19 [Note] Event Scheduler: Loaded 0 events 101210 19:14:19 [Note] /usr/sbin/mysqld: ready for connections. Version: '5.1.31-1ubuntu2-log' socket: '/var/run/mysqld/mysqld.sock' port: 3306 (Ubuntu) 101210 19:14:32 InnoDB: error: space object of table mydb/__twitter_friend, InnoDB: space id 1602 did not exist in memory. Retrying an open. 101210 19:14:32 InnoDB: error: space object of table mydb/access_request, InnoDB: space id 1318 did not exist in memory. Retrying an open. 101210 19:14:32 InnoDB: error: space object of table mydb/activity, InnoDB: space id 1595 did not exist in memory. Retrying an open. 101210 19:14:32 - mysqld got signal 11 ; This could be because you hit a bug. It is also possible that this binary or one of the libraries it was linked against is corrupt, improperly built, or misconfigured. This error can also be caused by malfunctioning hardware. We will try our best to scrape up some info that will hopefully help diagnose the problem, but since we have already crashed, something is definitely wrong and this may fail. key_buffer_size=16777216 read_buffer_size=131072 max_used_connections=1 max_threads=600 threads_connected=1 It is possible that mysqld could use up to key_buffer_size + (read_buffer_size + sort_buffer_size)*max_threads = 1328077 K bytes of memory Hope that's ok; if not, decrease some variables in the equation. thd: 0x1753c070 Attempting backtrace. You can use the following information to find out where mysqld died. If you see no messages after this, something went terribly wrong... stack_bottom = 0x7f7a0b5800d0 thread_stack 0x20000 /usr/sbin/mysqld(my_print_stacktrace+0x29) [0x8b4f89] /usr/sbin/mysqld(handle_segfault+0x383) [0x5f8f03] /lib/libpthread.so.0 [0x7f7cbc350080] /usr/sbin/mysqld(ha_innobase::innobase_get_index(unsigned int)+0x46) [0x77c516] /usr/sbin/mysqld(ha_innobase::innobase_initialize_autoinc()+0x40) [0x77c640] /usr/sbin/mysqld(ha_innobase::open(char const*, int, unsigned int)+0x3f3) [0x781f23] /usr/sbin/mysqld(handler::ha_open(st_table*, char const*, int, int)+0x3f) [0x6db00f] /usr/sbin/mysqld(open_table_from_share(THD*, st_table_share*, char const*, unsigned int, unsigned int, unsigned int, st_table*, bool)+0x57a) [0x64760a] /usr/sbin/mysqld [0x63f281] /usr/sbin/mysqld(open_table(THD*, TABLE_LIST*, st_mem_root*, bool*, unsigned int)+0x626) [0x641e16] /usr/sbin/mysqld(open_tables(THD*, TABLE_LIST**, unsigned int*, unsigned int)+0x5db) [0x6429cb] /usr/sbin/mysqld(open_normal_and_derived_tables(THD*, TABLE_LIST*, unsigned int)+0x1e) [0x642b0e] /usr/sbin/mysqld(mysqld_list_fields(THD*, TABLE_LIST*, char const*)+0x22) [0x70b292] /usr/sbin/mysqld(dispatch_command(enum_server_command, THD*, char*, unsigned int)+0x146d) [0x60dc1d] /usr/sbin/mysqld(do_command(THD*)+0xe8) [0x60dda8] /usr/sbin/mysqld(handle_one_connection+0x226) [0x601426] /lib/libpthread.so.0 [0x7f7cbc3483ba] /lib/libc.so.6(clone+0x6d) [0x7f7cbae91fcd] Trying to get some variables. Some pointers may be invalid and cause the dump to abort... thd->query at 0x1754d690 = thd->thread_id=1 thd->killed=NOT_KILLED The manual page at http://dev.mysql.com/doc/mysql/en/crashing.html contains information that should help you find out what is causing the crash.

  Read the article

• Windows 7 boots to black screen with blinking cursor

  - by murgatroid99

  I have an Alienware M17x that dual boots into Ubuntu 11.04 and Windows 7 Home Premium. Currently, the computer starts at the GRUB loader and will boot into Ubuntu, but if I try to boot into Windows, I immediately get a black screen with a blinking cursor in the upper left corner. The output of fdisk -l is Device Boot Start End Blocks Id System /dev/dm-0p1 1 5 40131 de Dell Utility Partition 1 does not start on physical sector boundary. /dev/dm-0p2 6 1918 15360000 7 HPFS/NTFS Partition 2 does not start on physical sector boundary. /dev/dm-0p3 * 1918 64772 504878877+ 7 HPFS/NTFS Partition 3 does not start on physical sector boundary. /dev/dm-0p4 64772 77827 104858625 5 Extended Partition 4 does not start on physical sector boundary. /dev/dm-0p5 64772 67204 19531008 83 Linux /dev/dm-0p6 67204 74498 58593536 83 Linux /dev/dm-0p7 74498 77577 24731648 83 Linux /dev/dm-0p8 77578 77827 2000128 82 Linux swap / Solaris I have used the Windows rescue CD, and run the automatic error fixer until it finds no errors. I have run chkdsk /R on both the main Windows 7 (/dev/dm-0p3) partition and the recovery partition (/dev/dm-0p2). I set the main Windows 7 partition to be active. I also tried running in the recovery console the commands bootrec /fixmbr bootrec /fixboot bootrec /rebuildbcd None of these helped and the last set of commands deletes grub, which I then have to reinstall from Ubuntu. I think the last thing I did in windows before this started was install the newest ATI driver for my video card. This would suggest using system restore, and I actually had a restore point earlier (after the problem started), but after whatever I did that restore point does not appear in the list on the recovery disk any more, so I cannot do a system restore. Is there anything else I can try to make Windows boot properly again? Edit: Running the suggested commands bootsect /nt60 c: bcdboot c:\windows /s c: was also ineffective.

  Read the article

• datawind ubislate 9ci tablet computer hanging on boot

  - by user57924

  I am new to this forum. I purchased a new tablet Datawind Ubislate 9ci. It is a 9 inch no-bluetooth tablet. Details: Android 4.1.1 Rock chip RK2928 KERNEL linux version 3.0.36 I was trying to install CWM through mobile odin and ROM manager but my tablet was not supported so i downloaded build.prop editor from google play and changed it to some other cwm recognizable model viz. Samsung, nexus etc. When i was doing the above mentioned procedure, suddenly my tablet is coming up to bootloading and hanging there only and not opening i went to recovery and tried to do wipe data factory reset but failed to get opened after boot android system recovery(3e) has the following options 1)reboot system now 2)apply update from ADB 3)apply update from external storage 4)update rkimage from external storage 6)wipe data factory reset 7)wipe cache partition 8)recovery system from back up i tried to do wipe data factory reset 2-3 times but still hanging at boot i had not made any back up before this bootloop and also tried hard reset by pressing needle at the back please somebody help me to get rid of this problem and also tell me how to unlock bootloader thank you

  Read the article

• How can I create a simple Exchange 2010 backup solution?

  - by bduncanj

  I'm sure this question's been asked a dozen times in one form or another, however after much searching, there doesn't appear to be an obvious simple recovery solution for a single Exchange box. We're using Exchange 2010 on a single server, the server hosts the AD and nothing else on the network uses the AD. The intent is to run this server as you would an externally hosted Exchange server - access only via HTTP (RPC mode or OWA) - all other ports blocked. I've a daily backup running, using Windows Server 2008 volume shadow service to backup the Exchange data to an external hard disk. My question is, how do I perform a bare metal recovery of this server? 1) Do I need to be explicitly including the active directory information in this nightly backup, or will it be there by virtue of the fact that this system is the primary AD server and the Windows backup service knows this? 2) I understand I can re-install Server 2008 onto my new hardware (in the case of hardware failure) and then run Exchange 2010 setup.exe with a /recover argument, referencing the backup volume. 3) It is acceptable to have some downtime during this recovery process. But is there anything else I should be aware of? Thanks! Duncan

  Read the article

• Enable bitlocker an save key to share

  - by user273694

  I have searched all over the web but cannot find a complete answer to this: How to enable Bitlocker on a laptop with TPM, and store a file with the Bitlocker recovery key and TPM password by USING THE manage-bde command line tool. The file should be the same as when created in the Bitlocker manager UI. I DO NOT want to save to AD. The same question was asked here but was not answered correctly. The goal is to write a script to be used with an endpoint manager. I have tried the following: manage-bde -on C: Works fine, but does not create or save a key. manage-bde -on C: -rk C:\myfolder\ and manage-bde -on C: -RecoveryKey C:\myfolder\ -rp The output from the last two methods state that a key has been saved to c:\myfolder and so on, but that is not the case. It also says that I have to: Save the password in a secure location Insert a USB flash drive with an external key file into the computer. Restart and run hardware test type "manage-bde -status" to check if the hardware test succeeded After a restart, I get an error saying that Bitlocker could not be enabled because the bitlocker startup key or recovery kpassword cannot be found on the USB device.... C: was not encrypted. Why am I asked to insert a USB?? I simply want to encrypt the hard drive and save the recovery information to a file automatically. Is that too much to ask? Help please!

  Read the article

• Rackspace Ubuntu 12.04 server stuck in initramfs after kernel upgrade

  - by Znarkus

  Can't boot after I did a aptitude full-upgrade and let it update menu.lst (did a diff first and it looked good). This is what I've done so far in the BusyBox shell: mkdir /tmp/xvda1 mount /dev/xvda1 /tmp/xvda1 chroot /dev/xvda1 nano /boot/grub/menu.lst This file looks like this: title Ubuntu 12.04.1 LTS, kernel 3.2.0-31-virtual root(hd0,0) kernel /boot/vmlinuz-3.2.0-31-virtual root=UUID=/dev/xvda1 ro quiet splash initrd /boot/initrd.img-3.2.0-31-virtual title Ubuntu 12.04.1 LTS, kernel 3.2.0-31-virtual (recovery mode) root(hd0,0) kernel /boot/vmlinuz-3.2.0-31-virtual root=UUID=/dev/xvda1 ro single initrd /boot/initrd.img-3.2.0-31-virtual titleUbuntu 12.04.1 LTS, kernel 3.2.0-24-virtual root(hd0,0) kernel/boot/vmlinuz-3.2.0-24-virtual root=UUID=/dev/xvda1 ro quiet splash initrd/boot/initrd.img-3.2.0-24-virtual titleUbuntu 12.04.1 LTS, kernel 3.2.0-24-virtual (recovery mode) root(hd0,0) kernel/boot/vmlinuz-3.2.0-24-virtual root=UUID=/dev/xvda1 ro single initrd/boot/initrd.img-3.2.0-24-virtual titleUbuntu 12.04.1 LTS, kernel 3.2.0-24-generic root(hd0,0) kernel/boot/vmlinuz-3.2.0-24-generic root=UUID=/dev/xvda1 ro quiet splash initrd/boot/initrd.img-3.2.0-24-generic titleUbuntu 12.04.1 LTS, kernel 3.2.0-24-generic (recovery mode) root(hd0,0) kernel/boot/vmlinuz-3.2.0-24-generic root=UUID=/dev/xvda1 ro single initrd/boot/initrd.img-3.2.0-24-generic titleChainload into GRUB 2 root(hd0,0) kernel/boot/grub/core.img titleUbuntu 12.04.1 LTS, memtest86+ root(hd0,0) kernel/boot/memtest86+.bin From what I remember, the upgrade added the UUID= string. Should I remove these? Or rather, how do I get my system back online again? Thanks. Update: Seems like I can't even edit the file. [ Error writing /boot/grub/menu.lst: Read-only file system ]

  Read the article

• Repair Windows 2008 boot

  - by aksamit

  I have been caught in a loop where I can't boot up Windows Server 2008. When the OS starts to boot I am presented two options: Launch Startup Repair (recommended) Start Windows Normally No matter what option is chosen I end up with a black screen stating "Windows is loading files..." which takes approx 15 minutes until "System Recovery" is started. I try to run the "Startup Repair" but it reports the following error: Problem Event Name: StartupRepairOffline Problem Signature 01: 0.0.0.0 Problem Signature 02: 0.0.0.0 Problem Signature 03: unknown OS Version: 6.1.7600.2.0.0.256.1 Locale ID: 1033 Actually no matter what other options I would try in the System Recovery they would also report some kind of error. Some other logging I have been able to extract: Diagnosis and repair details: Number of repair attempts: 1 Session details System Disk = Windows directory = AutoChk Run = 0 Number of root causes = 1 Test Performed: Name: System disk test Result: Completed successfully. Error code = 0x0 Root cause found: A hard disk could not be found. If a hard disk is installed, it is not responding. So it is actually stating that Harddisk could not be found... which to me seems to be a bit contradictious since the System Recovery just loaded all files from the hard disk it now states it cannot find. Any ideas on what other options I have?

  Read the article

• Ubuntu 12.04 can't boot after installing with software RAID 1

  - by Bill

  I've been trying to install Ubuntu with software RAID on my server and there is obviously something that I don't understand about the process. This is the guide that I followed: https://help.ubuntu.com/11.04/serverguide/advanced-installation.html I have two identical 1 TB disks in my server. I went through the initial install process and manually set up my partitions. On each disk I set up: (1) 100 MB partition for EFI boot (I didn't originally have this but added it based on a forum post I found after my original install failed to boot, I ended up with EFIboot since that was what the 'guided partitioning' decided to do) (1) 970 MB partition for / (1) 30 MB partition for swap I then created new RAID 1 disks combining the two partitions, one from each disk, such that each partition is mirrored. I then configured their usage as stated above. After saving the configuration I said yes to boot in a degraded state. The rest of the setup went normally, no errors of any kind. I saw GRUB being installed and again no errors. However, after rebooting the server I get the dreaded 'Insert boot media' and nothing happens. I loaded up the recovery disk and the mdadm configuration looks correct. md0 is my EFIBoot partition md1 is my \ partition using ext4 md2 is my swap partition Running file -s /dev/md0 doesn't indicate that GRUB is there and so I attempted to reinstall GRUB using the recovery disk. I selected the md0 disk and it appeared to install just fine. Running file -s /dev/md1 shows the error needs journal recovery, I'm not sure if that's related or not or how to fix that. Rebooting gives me the same problem, no boot media found. I've searched around the internet but can't figure out what to do next or more importantly how to troubleshoot what exactly is going wrong. Thanks!

  Read the article

• Understanding Netbook Partitions & UNR Installation

  - by Wesley

  Hi all, I have a Samsung N120 netbook (with upgraded 2GB RAM). I'm just looking at the Disk Management right now (in Windows XP) and I'm trying to understand what partition holds what. There is "Local Disk (C:)" which is 40GB, "RECOVERY" (no drive letter) which is 6GB and then "TEMP_PART01 (D:)" which is 103.05GB. XP is installed on Local Disk (C:) and I've only used this hard drive for all my files, etc. Recovery is recovery... probably not removable anyways. Now, what bugs me is the TEMP_PART01 (D:) partition, which contains quite a bit of random junk, such as EULA text documents, an "external installer", UI Wrapper Resource DLLs, a "VC_RED" Windows Installer Package and a few more files. I have no clue what any of it means, but I'm assuming that this was probably stuff that could have been on the Local Disk (C:), along with the WINDOWS, Program Files, and Docs and Settings folder. So, how should I go about this? Should I have kept all my data on D: and left all OS related files/folders on C:? Now, I want to install Ubuntu Netbook Remix. Question is, will this install within Windows, if I want to dual boot it? If not, would I partition D: into two small chunks, one on which I would install UNR? There are basically two questions in here, but it'd be great to get answers for both! Thanks in advance.

  Read the article

• BizTalk Server 2009 - Architecture Options

  - by StuartBrierley

  I recently needed to put forward a proposal for a BizTalk 2009 implementation and as a part of this needed to describe some of the basic architecture options available for consideration.  While I already had an idea of the type of environment that I would be looking to recommend, I felt that presenting a range of options while trying to explain some of the strengths and weaknesses of those options was a good place to start.  These outline architecture options should be equally valid for any version of BizTalk Server from 2004, through 2006 and R2, up to 2009.   The following diagram shows a crude representation of the common implementation options to consider when designing a BizTalk environment.         Each of these options provides differing levels of resilience in the case of failure or disaster, with the later options also providing more scope for performance tuning and scalability.   Some of the options presented above make use of clustering. Clustering may best be described as a technology that automatically allows one physical server to take over the tasks and responsibilities of another physical server that has failed. Given that all computer hardware and software will eventually fail, the goal of clustering is to ensure that mission-critical applications will have little or no downtime when such a failure occurs. Clustering can also be configured to provide load balancing, which should generally lead to performance gains and increased capacity and throughput.   (A) Single Servers   This option is the most basic BizTalk implementation that should be considered. It involves the deployment of a single BizTalk server in conjunction with a single SQL server. This configuration does not provide for any resilience in the case of the failure of either server. It is however the cheapest and easiest to implement option of those available.   Using a single BizTalk server does not provide for the level of performance tuning that is otherwise available when using more than one BizTalk server in a cluster.   The common edition of BizTalk used in single server implementations is the standard edition. It should be noted however that if future demand requires increased capacity for a solution, this BizTalk edition is limited to scaling up the implementation and not scaling out the number of servers in use. Any need to scale out the solution would require an upgrade to the enterprise edition of BizTalk.   (B) Single BizTalk Server with Clustered SQL Servers   This option uses a single BizTalk server with a cluster of SQL servers. By utilising clustered SQL servers we can ensure that there is some resilience to the implementation in respect of the databases that BizTalk relies on to operate. The clustering of two SQL servers is possible with the standard edition but to go beyond this would require the enterprise level edition. While this option offers improved resilience over option (A) it does still present a potential single point of failure at the BizTalk server.   Using a single BizTalk server does not provide for the level of performance tuning that is otherwise available when using more than one BizTalk server in a cluster.   The common edition of BizTalk used in single server implementations is the standard edition. It should be noted however that if future demand requires increased capacity for a solution, this BizTalk edition is limited to scaling up the implementation and not scaling out the number of servers in use. You are also unable to take advantage of multiple message boxes, which would allow us to balance the SQL load in the event of any bottlenecks in this area of the implementation. Any need to scale out the solution would require an upgrade to the enterprise edition of BizTalk.   (C) Clustered BizTalk Servers with Clustered SQL Servers   This option makes use of a cluster of BizTalk servers with a cluster of SQL servers to offer high availability and resilience in the case of failure of either of the server types involved. Clustering of BizTalk is only available with the enterprise edition of the product. Clustering of two SQL servers is possible with the standard edition but to go beyond this would require the enterprise level edition.    The use of a BizTalk cluster also provides for the ability to balance load across the servers and gives more scope for performance tuning any implemented solutions. It is also possible to add more BizTalk servers to an existing cluster, giving scope for scaling out the solution as future demand requires.   This might be seen as the middle cost option, providing a good level of protection in the case of failure, a decent level of future proofing, but at a higher cost than the single BizTalk server implementations.   (D) Clustered BizTalk Servers with Clustered SQL Servers – with disaster recovery/service continuity   This option is similar to that offered by (C) and makes use of a cluster of BizTalk servers with a cluster of SQL servers to offer high availability and resilience in case of failure of either of the server types involved. Clustering of BizTalk is only available with the enterprise edition of the product. Clustering of two SQL servers is possible with the standard edition but to go beyond this would require the enterprise level edition.    As with (C) the use of a BizTalk cluster also provides for the ability to balance load across the servers and gives more scope for performance tuning the implemented solution. It is also possible to add more BizTalk servers to an existing cluster, giving scope for scaling the solution out as future demand requires.   In this scenario however, we would be including some form of disaster recovery or service continuity. An example of this would be making use of multiple sites, with the BizTalk server cluster operating across sites to offer resilience in case of the loss of one or more sites. In this scenario there are options available for the SQL implementation depending on the network implementation; making use of either one cluster per site or a single SQL cluster across the network. A multi-site SQL implementation would require some form of data replication across the sites involved.   This is obviously an expensive and complex option, but does provide an extraordinary amount of protection in the case of failure.

  Read the article

• Big Data – Buzz Words: What is HDFS – Day 8 of 21

  - by Pinal Dave

  In yesterday’s blog post we learned what is MapReduce. In this article we will take a quick look at one of the four most important buzz words which goes around Big Data – HDFS. What is HDFS ? HDFS stands for Hadoop Distributed File System and it is a primary storage system used by Hadoop. It provides high performance access to data across Hadoop clusters. It is usually deployed on low-cost commodity hardware. In commodity hardware deployment server failures are very common. Due to the same reason HDFS is built to have high fault tolerance. The data transfer rate between compute nodes in HDFS is very high, which leads to reduced risk of failure. HDFS creates smaller pieces of the big data and distributes it on different nodes. It also copies each smaller piece to multiple times on different nodes. Hence when any node with the data crashes the system is automatically able to use the data from a different node and continue the process. This is the key feature of the HDFS system. Architecture of HDFS The architecture of the HDFS is master/slave architecture. An HDFS cluster always consists of single NameNode. This single NameNode is a master server and it manages the file system as well regulates access to various files. In additional to NameNode there are multiple DataNodes. There is always one DataNode for each data server. In HDFS a big file is split into one or more blocks and those blocks are stored in a set of DataNodes. The primary task of the NameNode is to open, close or rename files and directory and regulate access to the file system, whereas the primary task of the DataNode is read and write to the file systems. DataNode is also responsible for the creation, deletion or replication of the data based on the instruction from NameNode. In reality, NameNode and DataNode are software designed to run on commodity machine build in Java language. Visual Representation of HDFS Architecture Let us understand how HDFS works with the help of the diagram. Client APP or HDFS Client connects to NameSpace as well as DataNode. Client App access to the DataNode is regulated by NameSpace Node. NameSpace Node allows Client App to connect to the DataNode based by allowing the connection to the DataNode directly. A big data file is divided into multiple data blocks (let us assume that those data chunks are A,B,C and D. Client App will later on write data blocks directly to the DataNode. Client App does not have to directly write to all the node. It just has to write to any one of the node and NameNode will decide on which other DataNode it will have to replicate the data. In our example Client App directly writes to DataNode 1 and detained 3. However, data chunks are automatically replicated to other nodes. All the information like in which DataNode which data block is placed is written back to NameNode. High Availability During Disaster Now as multiple DataNode have same data blocks in the case of any DataNode which faces the disaster, the entire process will continue as other DataNode will assume the role to serve the specific data block which was on the failed node. This system provides very high tolerance to disaster and provides high availability. If you notice there is only single NameNode in our architecture. If that node fails our entire Hadoop Application will stop performing as it is a single node where we store all the metadata. As this node is very critical, it is usually replicated on another clustered as well as on another data rack. Though, that replicated node is not operational in architecture, it has all the necessary data to perform the task of the NameNode in the case of the NameNode fails. The entire Hadoop architecture is built to function smoothly even there are node failures or hardware malfunction. It is built on the simple concept that data is so big it is impossible to have come up with a single piece of the hardware which can manage it properly. We need lots of commodity (cheap) hardware to manage our big data and hardware failure is part of the commodity servers. To reduce the impact of hardware failure Hadoop architecture is built to overcome the limitation of the non-functioning hardware. Tomorrow In tomorrow’s blog post we will discuss the importance of the relational database in Big Data. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Big Data, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL

  Read the article

• Alternate way to create a clone of a UNIX System

  - by Spirit

  THE STORY: (If you don't like to read much, down below is the question :) ) Where I work we have two HP RP2470 servers same hardware same number of hard drives same everything :). One of them is a production server and runs HP-UX 11.00. The poor ba***rd hasn't been turned off for years and now I have to make a clone of it on the other server - just in case, for redundancy. The problem is simple (or not simple) as I have to make the the other server exactly the same. However the old version of OS (UX 11.00 is a history now) and the old software running on it, have made my task almost impossible. On the production server there is also a cloning/recover utility Ignite-UX. I tried many times to create a recovery tape with it. Then when I load the tape on the backup server, it succeeds with the loading of the tape (no errors no warnings) but on the next restart it fails to load the OS :S and drops into HP`s ISL prompt. --- THE QUESTION: Is there an alternate way to create a clone of the Unix System? The environment is: 1. 2x HP RP2470 Servers (non-Intel), same hardware, same number od HDDs (two each of them) same everything. 2. OS running: HP-UX 11.00 The production server has to be cloned without downtime - sadly :( as I hope that they will reconsider on this one For example (like on Windows platforms), if you try to copy an entire HDD with Windows inside on another HDD, and then put that HDD on another PC it will still work, as long as the hardware is the same. Can I do something like that with a Unix system? Can I somehow COPY the contents of the entire HDD, put those on another HDD, and then just load the HDD into the other server? (If you haven't read the story the servers are exactly the same) Will it work? Can it be done with ordinary commands like cp or dump or something like that? Does any one have a similar experience? --- UPDATE: 26.01.2012 NOTE: The update is related to "The Story". If you haven't read that part then you can skip this update. This is just a short update on the recover logs from the Ignite Tape.. someone with more exp. might notice something.. ... --- READING CONTENTS OF THE IGNITE TAPE --- --- OUTPUT OMITED --- ... ... x ./configure3, 413696 bytes, 808 tape blocks x ./monitor_bpr, 20480 bytes, 40 tape blocks * Download_mini-system: Complete * Loading_software: Begin * Installing boot area on disk. * Enabling swap areas. * Backing up LVM configuration for "vg00". * Processing the archive source (Recovery Archive). * Wed Jan 25 15:27:32 EST 2012: Starting archive load of the source (Recovery Archive). * Positioning the tape (/dev/rmt/0mn). * Archive extraction from tape is beginning. Please wait. * Wed Jan 25 15:39:52 EST 2012: Completed archive load of the source (Recovery Archive). * Executing user specified script: "/opt/ignite/data/scripts/os_arch_post_l". * Running in recovery mode (os_arch_post_l). * Running the ioinit command ("/sbin/ioinit -c") * Creating device files via the insf command. insf: Installing special files for sdisk instance 0 address 0/0/1/1.15.0 insf: Installing special files for sdisk instance 1 address 0/0/2/0.1.0 insf: Installing special files for sdisk instance 2 address 0/0/2/1.15.0 insf: Installing special files for stape instance 0 address 0/0/1/0.3.0 insf: Installing special files for btlan instance 0 address 0/0/0/0 insf: Installing special files for btlan instance 1 address 0/2/0/0 insf: Installing special files for pseudo driver dlpi insf: Installing special files for pseudo driver kepd insf: Installing special files for pseudo driver framebuf insf: Installing special files for pseudo driver sad * Running "/opt/upgrade/bin/tlinstall -v" and correcting transition link permissions. * Constructing the bootconf file. * Setting primary boot path to "0/0/1/1.15.0". * Executing: "/var/adm/sw/products/PHSS_20146/pfiles/iux_postload". * Executing: "/var/adm/sw/products/PHSS_25982/pfiles/iux_postload". NOTE: tlinstall is searching filesystem - please be patient NOTE: Successfully completed * Loading_software: Complete * Build_Kernel: Begin NOTE: Since the /stand/vmunix kernel is already in place, the kernel will not be re-built. Note that no mod_kernel directives will be processed. * Build_Kernel: Complete * Boot_From_Client_Disk: Begin * Rebooting machine as expected. NOTE: Rebooting system. sync'ing disks (0 buffers to flush): 0 buffers not flushed 0 buffers still dirty Closing open logical volumes... Done Console reset done. Boot device reset done. ********** VIRTUAL FRONT PANEL ********** System Boot detected ***************************************** LEDs: RUN ATTENTION FAULT REMOTE POWER FLASH OFF OFF ON ON LED State: Running non-OS code. (i.e. Boot or Diagnostics) ... ... ... --- SERVER IS PERFORMING POST SEQUENCE HERE --- --- OUTPUT OMITED --- ... ... ... ***************************************** ************ EARLY BOOT VFP ************* End of early boot detected ***************************************** Firmware Version 43.50 Duplex Console IO Dependent Code (IODC) revision 1 ------------------------------------------------------------------------------ (c) Copyright 1995-2002, Hewlett-Packard Company, All rights reserved ------------------------------------------------------------------------------ Processor Speed State CoProcessor State Cache Size Number State Inst Data --------- -------- --------------------- ----------------- ------------ 0 650 MHz Active Functional 750 KB 1.5 MB 1 650 MHz Idle Functional 750 KB 1.5 MB Central Bus Speed (in MHz) : 120 Available Memory : 2097152 KB Good Memory Required : 16140 KB Primary boot path: 0/0/1/1.15 Alternate boot path: 0/0/2/1.15 Console path: 0/0/4/1.643 Keyboard path: 0/0/4/0.0 Processor is starting autoboot process. To discontinue, press any key within 10 seconds. 10 seconds expired. Proceeding... Trying Primary Boot Path ------------------------ Booting... Boot IO Dependent Code (IODC) revision 1 HARD Booted. ISL Revision A.00.38 OCT 26, 1994 ISL booting hpux ISL>

  Read the article

• What to Do When Windows Won’t Boot

  - by Chris Hoffman

  You turn on your computer one day and Windows refuses to boot — what do you do? “Windows won’t boot” is a common symptom with a variety of causes, so you’ll need to perform some troubleshooting. Modern versions of Windows are better at recovering from this sort of thing. Where Windows XP might have stopped in its tracks when faced with this problem, modern versions of Windows will try to automatically run Startup Repair. First Things First Be sure to think about changes you’ve made recently — did you recently install a new hardware driver, connect a new hardware component to your computer, or open your computer’s case and do something? It’s possible the hardware driver is buggy, the new hardware is incompatible, or that you accidentally unplugged something while working inside your computer. The Computer Won’t Power On At All If your computer won’t power on at all, ensure it’s plugged into a power outlet and that the power connector isn’t loose. If it’s a desktop PC, ensure the power switch on the back of its case — on the power supply — is set to the On position. If it still won’t power on at all, it’s possible you disconnected a power cable inside its case. If you haven’t been messing around inside the case, it’s possible the power supply is dead. In this case, you’ll have to get your computer’s hardware fixed or get a new computer. Be sure to check your computer monitor — if your computer seems to power on but your screen stays black, ensure your monitor is powered on and that the cable connecting it to your computer’s case is plugged in securely at both ends. The Computer Powers On And Says No Bootable Device If your computer is powering on but you get a black screen that says something like “no bootable device” or another sort of “disk error” message, your computer can’t seem to boot from the hard drive that Windows was installed on. Enter your computer’s BIOS or UEFI firmware setup screen and check its boot order setting, ensuring that it’s set to boot from its hard drive. If the hard drive doesn’t appear in the list at all, it’s possible your hard drive has failed and can no longer be booted from. In this case, you may want to insert Windows installation or recovery media and run the Startup Repair operation. This will attempt to make Windows bootable again. For example, if something overwrote your Windows drive’s boot sector, this will repair the boot sector. If the recovery environment won’t load or doesn’t see your hard drive, you likely have a hardware problem. Be sure to check your BIOS or UEFI’s boot order first if the recovery environment won’t load. You can also attempt to manually fix Windows boot loader problems using the fixmbr and fixboot commands. Modern versions of Windows should be able to fix this problem for you with the Startup Repair wizard, so you shouldn’t actually have to run these commands yourself. Windows Freezes or Crashes During Boot If Windows seems to start booting but fails partway through, you may be facing either a software or hardware problem. If it’s a software problem, you may be able to fix it by performing a Startup Repair operation. If you can’t do this from the boot menu, insert a Windows installation disc or recovery disk and use the startup repair tool from there. If this doesn’t help at all, you may want to reinstall Windows or perform a Refresh or Reset on Windows 8. If the computer encounters errors while attempting to perform startup repair or reinstall Windows, or the reinstall process works properly and you encounter the same errors afterwards, you likely have a hardware problem. Windows Starts and Blue Screens or Freezes If Windows crashes or blue-screens on you every time it boots, you may be facing a hardware or software problem. For example, malware or a buggy driver may be loading at boot and causing the crash, or your computer’s hardware may be malfunctioning. To test this, boot your Windows computer in safe mode. In safe mode, Windows won’t load typical hardware drivers or any software that starts automatically at startup. If the computer is stable in safe mode, try uninstalling any recently installed hardware drivers, performing a system restore, and scanning for malware. If you’re lucky, one of these steps may fix your software problem and allow you to boot Windows normally. If your problem isn’t fixed, try reinstalling Windows or performing a Refresh or Reset on Windows 8. This will reset your computer back to its clean, factory-default state. If you’re still experiencing crashes, your computer likely has a hardware problem. Recover Files When Windows Won’t Boot If you have important files that will be lost and want to back them up before reinstalling Windows, you can use a Windows installer disc or Linux live media to recover the files. These run entirely from a CD, DVD, or USB drive and allow you to copy your files to another external media, such as another USB stick or an external hard drive. If you’re incapable of booting a Windows installer disc or Linux live CD, you may need to go into your BIOS or UEFI and change the boot order setting. If even this doesn’t work — or if you can boot from the devices and your computer freezes or you can’t access your hard drive — you likely have a hardware problem. You can try pulling the computer’s hard drive, inserting it into another computer, and recovering your files that way. Following these steps should fix the vast majority of Windows boot issues — at least the ones that are actually fixable. The dark cloud that always hangs over such issues is the possibility that the hard drive or another component in the computer may be failing. Image Credit: Karl-Ludwig G. Poggemann on Flickr, Tzuhsun Hsu on Flickr     

  Read the article

• laptop crashed: why?

  - by sds

  my linux (ubuntu 12.04) laptop crashed, and I am trying to figure out why. # last sds pts/4 :0 Tue Sep 4 10:01 still logged in sds pts/3 :0 Tue Sep 4 10:00 still logged in reboot system boot 3.2.0-29-generic Tue Sep 4 09:43 - 11:23 (01:40) sds pts/8 :0 Mon Sep 3 14:23 - crash (19:19) this seems to indicate a crash at 09:42 (= 14:23+19:19). as per another question, I looked at /var/log: auth.log: Sep 4 09:17:02 t520sds CRON[32744]: pam_unix(cron:session): session closed for user root Sep 4 09:43:17 t520sds lightdm: pam_unix(lightdm:session): session opened for user lightdm by (uid=0) no messages file syslog: Sep 4 09:24:19 t520sds kernel: [219104.819975] CPU0: Package power limit normal Sep 4 09:43:16 t520sds kernel: imklog 5.8.6, log source = /proc/kmsg started. kern.log: Sep 4 09:24:19 t520sds kernel: [219104.819969] CPU1: Package power limit normal Sep 4 09:24:19 t520sds kernel: [219104.819971] CPU2: Package power limit normal Sep 4 09:24:19 t520sds kernel: [219104.819974] CPU3: Package power limit normal Sep 4 09:24:19 t520sds kernel: [219104.819975] CPU0: Package power limit normal Sep 4 09:43:16 t520sds kernel: imklog 5.8.6, log source = /proc/kmsg started. Sep 4 09:43:16 t520sds kernel: [ 0.000000] Initializing cgroup subsys cpuset Sep 4 09:43:16 t520sds kernel: [ 0.000000] Initializing cgroup subsys cpu I had a computation running until 9:24, but the system crashed 18 minutes later! kern.log has many pages of these: Sep 4 09:43:16 t520sds kernel: [ 0.000000] total RAM covered: 8086M Sep 4 09:43:16 t520sds kernel: [ 0.000000] gran_size: 64K chunk_size: 64K num_reg: 10 lose cover RAM: 38M Sep 4 09:43:16 t520sds kernel: [ 0.000000] gran_size: 64K chunk_size: 128K num_reg: 10 lose cover RAM: 38M Sep 4 09:43:16 t520sds kernel: [ 0.000000] gran_size: 64K chunk_size: 256K num_reg: 10 lose cover RAM: 38M Sep 4 09:43:16 t520sds kernel: [ 0.000000] gran_size: 64K chunk_size: 512K num_reg: 10 lose cover RAM: 38M Sep 4 09:43:16 t520sds kernel: [ 0.000000] gran_size: 64K chunk_size: 1M num_reg: 10 lose cover RAM: 38M Sep 4 09:43:16 t520sds kernel: [ 0.000000] gran_size: 64K chunk_size: 2M num_reg: 10 lose cover RAM: 38M Sep 4 09:43:16 t520sds kernel: [ 0.000000] gran_size: 64K chunk_size: 4M num_reg: 10 lose cover RAM: 38M Sep 4 09:43:16 t520sds kernel: [ 0.000000] gran_size: 64K chunk_size: 8M num_reg: 10 lose cover RAM: 38M Sep 4 09:43:16 t520sds kernel: [ 0.000000] gran_size: 64K chunk_size: 16M num_reg: 10 lose cover RAM: 38M Sep 4 09:43:16 t520sds kernel: [ 0.000000] *BAD*gran_size: 64K chunk_size: 32M num_reg: 10 lose cover RAM: -16M Sep 4 09:43:16 t520sds kernel: [ 0.000000] *BAD*gran_size: 64K chunk_size: 64M num_reg: 10 lose cover RAM: -16M Sep 4 09:43:16 t520sds kernel: [ 0.000000] gran_size: 64K chunk_size: 128M num_reg: 10 lose cover RAM: 0G Sep 4 09:43:16 t520sds kernel: [ 0.000000] gran_size: 64K chunk_size: 256M num_reg: 10 lose cover RAM: 0G Sep 4 09:43:16 t520sds kernel: [ 0.000000] gran_size: 64K chunk_size: 512M num_reg: 10 lose cover RAM: 0G Sep 4 09:43:16 t520sds kernel: [ 0.000000] gran_size: 64K chunk_size: 1G num_reg: 10 lose cover RAM: 0G Sep 4 09:43:16 t520sds kernel: [ 0.000000] *BAD*gran_size: 64K chunk_size: 2G num_reg: 10 lose cover RAM: -1G does this mean that my RAM is bad?! it also says Sep 4 09:43:16 t520sds kernel: [ 2.944123] EXT4-fs (sda1): INFO: recovery required on readonly filesystem Sep 4 09:43:16 t520sds kernel: [ 2.944126] EXT4-fs (sda1): write access will be enabled during recovery Sep 4 09:43:16 t520sds kernel: [ 3.088001] firewire_core: created device fw0: GUID f0def1ff8fbd7dff, S400 Sep 4 09:43:16 t520sds kernel: [ 8.929243] EXT4-fs (sda1): orphan cleanup on readonly fs Sep 4 09:43:16 t520sds kernel: [ 8.929249] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 658984 ... Sep 4 09:43:16 t520sds kernel: [ 9.343266] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 525343 Sep 4 09:43:16 t520sds kernel: [ 9.343270] EXT4-fs (sda1): 56 orphan inodes deleted Sep 4 09:43:16 t520sds kernel: [ 9.343271] EXT4-fs (sda1): recovery complete Sep 4 09:43:16 t520sds kernel: [ 9.645799] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) does this mean my HD is bad? As per FaultyHardware, I tried smartctl -l selftest, which uncovered no errors: smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-30-generic] (local build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: Seagate Momentus 7200.4 Device Model: ST9500420AS Serial Number: 5VJE81YK LU WWN Device Id: 5 000c50 0440defe3 Firmware Version: 0003LVM1 User Capacity: 500,107,862,016 bytes [500 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: ATA-8-ACS revision 4 Local Time is: Mon Sep 10 16:40:04 2012 EDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 109) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x103b) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 117 099 034 Pre-fail Always - 162843537 3 Spin_Up_Time 0x0003 100 100 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 571 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 069 060 030 Pre-fail Always - 17210154023 9 Power_On_Hours 0x0032 095 095 000 Old_age Always - 174362787320258 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 571 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 1 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 061 043 045 Old_age Always In_the_past 39 (0 11 44 26) 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 84 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 20 193 Load_Cycle_Count 0x0032 099 099 000 Old_age Always - 2434 194 Temperature_Celsius 0x0022 039 057 000 Old_age Always - 39 (0 15 0 0) 195 Hardware_ECC_Recovered 0x001a 041 041 000 Old_age Always - 162843537 196 Reallocated_Event_Count 0x000f 095 095 030 Pre-fail Always - 4540 (61955, 0) 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 254 Free_Fall_Sensor 0x0032 100 100 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 4545 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. Googling for the messages proved inconclusive, I can't even figure out whether the messages are routine or catastrophic. So, what do I do now?

  Read the article

• ATI propriatery drivers install latest 12.8, broke my kernel. Stuck on kernel 3.2.0-26

  - by user66987

  I messed up a bit. Hoping some here can help me. I tried to install the newest catalyst 12.8. Sadly, this broke my system. I was stuck in low graphics mode. I finally managed to restore the proprietary drivers, and get into ubuntu again. But now I am stuck on kernel 3.2.0.26. I had installed kernel 3.2.0-30, but the system no longer sees it. I have kernel 3.2.0-29 too, but the system cannot see that as well. In the grub menu. When I use sudo update-grub, they are both listed. Here are the output I get: Searching for GRUB installation directory ... found: /boot/grub Cannot determine root device. Assuming /dev/hda1 This error is probably caused by an invalid /etc/fstab Searching for default file ... found: /boot/grub/default Testing for an existing GRUB menu.lst file ... found: /boot/grub/menu.lst Searching for splash image ... none found, skipping ... Found kernel: /boot/vmlinuz-3.2.0-30-generic Found kernel: /boot/vmlinuz-3.2.0-29-generic Found kernel: /boot/vmlinuz-3.2.0-27-generic Found kernel: /boot/vmlinuz-3.2.0-26-generic Found GRUB 2: /boot/grub/core.img Found kernel: /boot/memtest86+.bin Updating /boot/grub/menu.lst ... done I have searched everywhere to find a solution to my problem, but can't find any solutions. If you need any log outputs to figure out the problem, please let me know which ones. Update: here is the output for grub.cfg # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="0" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { insmod vbe insmod vga insmod video_bochs insmod video_cirrus } insmod part_msdos insmod ext2 set root='(hd2,msdos1)' search --no-floppy --fs-uuid --set=root 270c7c58-06d8-4e6b-b9bb-8d92f46adc0b if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=auto load_video insmod gfxterm insmod part_msdos insmod ext2 set root='(hd2,msdos1)' search --no-floppy --fs-uuid --set=root 270c7c58-06d8-4e6b-b9bb-8d92f46adc0b set locale_dir=($root)/boot/grub/locale set lang=nb_NO insmod gettext fi terminal_output gfxterm if [ "${recordfail}" = 1 ]; then set timeout=-1 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray if background_color 44,0,30; then clear fi ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### function gfxmode { set gfxpayload="${1}" if [ "${1}" = "keep" ]; then set vt_handoff=vt.handoff=7 else set vt_handoff= fi } if [ "${recordfail}" != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode if [ "${linux_gfx_mode}" != "text" ]; then load_video; fi menuentry 'Ubuntu, med Linux 3.2.0-26-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='(hd2,msdos1)' search --no-floppy --fs-uuid --set=root 270c7c58-06d8-4e6b-b9bb-8d92f46adc0b linux /boot/vmlinuz-3.2.0-26-generic root=UUID=270c7c58-06d8-4e6b-b9bb-8d92f46adc0b ro quiet splash $vt_handoff initrd /boot/initrd.img-3.2.0-26-generic } menuentry 'Ubuntu, med Linux 3.2.0-26-generic (gjenopprettelsesmodus)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_msdos insmod ext2 set root='(hd2,msdos1)' search --no-floppy --fs-uuid --set=root 270c7c58-06d8-4e6b-b9bb-8d92f46adc0b echo 'Laster Linux 3.2.0-26-generic ...' linux /boot/vmlinuz-3.2.0-26-generic root=UUID=270c7c58-06d8-4e6b-b9bb-8d92f46adc0b ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.2.0-26-generic } submenu "Previous Linux versions" { menuentry 'Ubuntu, med Linux 3.2.0-25-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='(hd2,msdos1)' search --no-floppy --fs-uuid --set=root 270c7c58-06d8-4e6b-b9bb-8d92f46adc0b linux /boot/vmlinuz-3.2.0-25-generic root=UUID=270c7c58-06d8-4e6b-b9bb-8d92f46adc0b ro quiet splash $vt_handoff initrd /boot/initrd.img-3.2.0-25-generic } menuentry 'Ubuntu, med Linux 3.2.0-25-generic (gjenopprettelsesmodus)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_msdos insmod ext2 set root='(hd2,msdos1)' search --no-floppy --fs-uuid --set=root 270c7c58-06d8-4e6b-b9bb-8d92f46adc0b echo 'Laster Linux 3.2.0-25-generic ...' linux /boot/vmlinuz-3.2.0-25-generic root=UUID=270c7c58-06d8-4e6b-b9bb-8d92f46adc0b ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.2.0-25-generic } menuentry 'Ubuntu, med Linux 3.2.0-24-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='(hd2,msdos1)' search --no-floppy --fs-uuid --set=root 270c7c58-06d8-4e6b-b9bb-8d92f46adc0b linux /boot/vmlinuz-3.2.0-24-generic root=UUID=270c7c58-06d8-4e6b-b9bb-8d92f46adc0b ro quiet splash $vt_handoff initrd /boot/initrd.img-3.2.0-24-generic } menuentry 'Ubuntu, med Linux 3.2.0-24-generic (gjenopprettelsesmodus)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_msdos insmod ext2 set root='(hd2,msdos1)' search --no-floppy --fs-uuid --set=root 270c7c58-06d8-4e6b-b9bb-8d92f46adc0b echo 'Laster Linux 3.2.0-24-generic ...' linux /boot/vmlinuz-3.2.0-24-generic root=UUID=270c7c58-06d8-4e6b-b9bb-8d92f46adc0b ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.2.0-24-generic } menuentry 'Ubuntu, med Linux 3.2.0-23-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='(hd2,msdos1)' search --no-floppy --fs-uuid --set=root 270c7c58-06d8-4e6b-b9bb-8d92f46adc0b linux /boot/vmlinuz-3.2.0-23-generic root=UUID=270c7c58-06d8-4e6b-b9bb-8d92f46adc0b ro quiet splash $vt_handoff initrd /boot/initrd.img-3.2.0-23-generic } menuentry 'Ubuntu, med Linux 3.2.0-23-generic (gjenopprettelsesmodus)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_msdos insmod ext2 set root='(hd2,msdos1)' search --no-floppy --fs-uuid --set=root 270c7c58-06d8-4e6b-b9bb-8d92f46adc0b echo 'Laster Linux 3.2.0-23-generic ...' linux /boot/vmlinuz-3.2.0-23-generic root=UUID=270c7c58-06d8-4e6b-b9bb-8d92f46adc0b ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.2.0-23-generic } } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_msdos insmod ext2 set root='(hd2,msdos1)' search --no-floppy --fs-uuid --set=root 270c7c58-06d8-4e6b-b9bb-8d92f46adc0b linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_msdos insmod ext2 set root='(hd2,msdos1)' search --no-floppy --fs-uuid --set=root 270c7c58-06d8-4e6b-b9bb-8d92f46adc0b linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### menuentry "Windows 7 (loader) (on /dev/sdb1)" --class windows --class os { insmod part_msdos insmod ntfs set root='(hd1,msdos1)' search --no-floppy --fs-uuid --set=root 448AF3CE8AF3BA8E chainloader +1 } ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### How can I set kernel 3.2.0.30 as the default kernel? According to this file, kernel 3.2.0-30 does not exist.

  Read the article

• Windows Azure Use Case: Web Applications

  - by BuckWoody

  This is one in a series of posts on when and where to use a distributed architecture design in your organization's computing needs. You can find the main post here: http://blogs.msdn.com/b/buckwoody/archive/2011/01/18/windows-azure-and-sql-azure-use-cases.aspx  Description: Many applications have a requirement to be located outside of the organization’s internal infrastructure control. For instance, the company website for a brick-and-mortar retail company may want to post not only static but interactive content to be available to their external customers, and not want the customers to have access inside the organization’s firewall. There are also cases of pure web applications used for a great many of the internal functions of the business. This allows for remote workers, shared customer/employee workloads and data and other advantages. Some firms choose to host these web servers internally, others choose to contract out the infrastructure to an “ASP” (Application Service Provider) or an Infrastructure as a Service (IaaS) company. In any case, the design of these applications often resembles the following: In this design, a server (or perhaps more than one) hosts the presentation function (http or https) access to the application, and this same system may hold the computational aspects of the program. Authorization and Access is controlled programmatically, or is more open if this is a customer-facing application. Storage is either placed on the same or other servers, hosted within an RDBMS or NoSQL database, or a combination of the options, all coded into the application. High-Availability within this scenario is often the responsibility of the architects of the application, and by purchasing more hosting resources which must be built, licensed and configured, and manually added as demand requires, although some IaaS providers have a partially automatic method to add nodes for scale-out, if the architecture of the application supports it. Disaster Recovery is the responsibility of the system architect as well. Implementation: In a Windows Azure Platform as a Service (PaaS) environment, many of these architectural considerations are designed into the system. The Azure “Fabric” (not to be confused with the Azure implementation of Application Fabric - more on that in a moment) is designed to provide scalability. Compute resources can be added and removed programmatically based on any number of factors. Balancers at the request-level of the Fabric automatically route http and https requests. The fabric also provides High-Availability for storage and other components. Disaster recovery is a shared responsibility between the facilities (which have the ability to restore in case of catastrophic failure) and your code, which should build in recovery. In a Windows Azure-based web application, you have the ability to separate out the various functions and components. Presentation can be coded for multiple platforms like smart phones, tablets and PC’s, while the computation can be a single entity shared between them. This makes the applications more resilient and more object-oriented, and lends itself to a SOA or Distributed Computing architecture. It is true that you could code up a similar set of functionality in a traditional web-farm, but the difference here is that the components are built into the very design of the architecture. The API’s and DLL’s you call in a Windows Azure code base contains components as first-class citizens. For instance, if you need storage, it is simply called within the application as an object.  Computation has multiple options and the ability to scale linearly. You also gain another component that you would either have to write or bolt-in to a typical web-farm: the Application Fabric. This Windows Azure component provides communication between applications or even to on-premise systems. It provides authorization in either person-based or claims-based perspectives. SQL Azure provides relational storage as another option, and can also be used or accessed from on-premise systems. It should be noted that you can use all or some of these components individually. Resources: Design Strategies for Scalable Active Server Applications - http://msdn.microsoft.com/en-us/library/ms972349.aspx  Physical Tiers and Deployment  - http://msdn.microsoft.com/en-us/library/ee658120.aspx

  Read the article

• Brainless Backups

  - by Jesse

  I’m a software developer by trade which means to my friends and family I’m just a “computer guy”. It’s assumed that I know everything about every facet of computing from removing spyware to replacing hardware. I also can do all of this blindly over the phone or after hearing a five to ten word description of the problem over dinner ;-) In my position as CIO of my friends and families I’ve been in the unfortunate position of trying to recover music, pictures, or documents off of failed hard drives on more than one occasion. It’s not a great situation for anyone, and it’s always at these times that the importance of backups becomes so clear. Several months back a friend of mine found himself in this situation. The hard drive on his 8 year old laptop failed and took a good number of his digital photos with it. I think most folks can deal with losing some of their music and even some of their documents, but it really stings to lose pictures of past events and loved ones. After ordering a new laptop, my friend went out and bought an external hard drive so that he could start keeping a backup of his data. As fate would have it, several months later the drive in his new laptop failed and he learned the hard way that simply buying the external hard drive isn’t enough… you actually have to copy your stuff over every once in awhile! The importance of backup and recovery plans is (hopefully) well known in IT organizations. Well executed backup plans are in place, and hopefully the backup and recovery process is tested regularly. When you’re talking about users at home, however, the need for these backups is often understood far too late. Most typical users can’t be expected to remember to backup their data regularly and also don’t always have the know-how to setup automated backups. For my friends and family members in this situation I recommend tools like Dropbox, Carbonite, and Mozy. Here’s why I like them: They’re affordable: Dropbox and Mozy both have free offerings, though most people with lots of music and/or photos to backup will probably exceed the storage limitations of those free plans pretty quickly. Still, all three offer pretty affordable monthly or yearly plans. In my opinion, Carbonite’s unlimited storage plan for $50-$60 per year is the best value around. They’re easy to setup: Both Dropbox and Carbonite are very easy to get setup and start using. I’ve never used Mozy, but I imagine it’s similarly painless to get up and running. Backups are automatically “off-site”: A backup that is sitting on an external hard drive right next to your computer is great, but might not protect against flood damage, a power surge, or other disasters in that single location. These services exist “in the cloud” so to speak, helping mitigate those concerns. Granted, this kind of backup scheme requires some trust in the 3rd party to protect your data from both malicious people and disastrous events. This truly is a bit of a double edged sword, but I sleep well at night knowing that my data is being backed up and secured by a company made up of engineers that focus on the business of doing backups right. Backups are “brainless”: What I like most about services like these is that they work “automagically” in the background, watching for files to be updated and automatically backing up those changes. There’s no need to remember to plug in that external drive and copy your data over. Since starting to recommend these services to my friends and family I find myself wearing my “data recovery” hat far less often. The only way backups are effective for your standard computer user is if they’re completely automatic. Backups need to be brainless, or they just won’t work.

  Read the article

• Leveraging Logical Standby Databases in Oracle 11g Data Guard

  Oracle Data Guard still offers support for the venerable logical standby database in Oracle Database 11g. This article, investigates how data warehouse and data mart environments can effectively leverage logical standby database features, but simultaneously provide a final destination when failover from a primary database is mandated during disaster recovery.

  Read the article

• Programming doesn&rsquo;t have to be Magic

  - by Wes McClure

  In the show LOST, the Swan Station had a button that “had to be pushed” every 100 minutes to avoid disaster.  Several characters in the show took it upon themselves to have faith and religiously push the button, resetting the clock and averting the unknown “disaster”.  There are striking similarities in this story to the code we write every day.  Here are some common ones that I encounter: “I don’t know what it does but the application doesn’t work without it” “I added that code because I saw it in other similar places, I didn’t understand it, but thought it was necessary.” (for consistency, or to make things “work”) “An error message recommended it” “I copied that code” (and didn’t look at what it was doing) “It was suggested in a forum online and it fixed my problem so I left it” In all of these cases we haven’t done our due diligence to understand what the code we are writing is actually doing.  In the rush to get things done it seems like we’re willing to push any button (add any line of code) just to get our desired result and move on.  All of the above explanations are common things we encounter, and are valid ways to work through a problem we have, but when we find a solution to a task we are working on (whether a bug or a feature), we should take a moment to reflect on what we don’t understand.  Remove what isn’t necessary, comprehend and simplify what is.  Why is it detrimental to commit code we don’t understand? Perpetuates unnecessary code If you copy code that isn’t necessary, someone else is more likely to do so, especially peers Perpetuates tech debt Adding unnecessary code leads to extra code that must be understood, maintained and eventually cleaned up in longer lived projects Tech debt begets tech debt as other developers copy or use this code as guidelines in similar situations Increases maintenance How do we know the code is simplified if we don’t understand it? Perpetuates a lack of ownership Makes it seem ok to commit anything so long as it “gets the job done” Perpetuates the notion that programming is magic If we don’t take the time to understand every line of code we add, then we are contributing to the notion that it is simply enough to make the code work, regardless of how. TLDR Don’t commit code that you don’t understand, take the time to understand it, simplify it and then commit it!

  Read the article

• Grant’s video warning – backup verification

  Grant takes a humorous (but completely serious) look at why you should be regularly verifying your backups. Get top tips for backup and recovery, and protect yourself when disaster strikes. Watch the video Schedule Azure backupsRed Gate’s Cloud Services makes it simple to create and schedule backups of your SQL Azure databases to Azure blob storage or Amazon S3. Try it for free today.

  Read the article

• Building My Website 101 - Essential Components of Website Building

  Are you one of those persons who wanted to be part of a larger community like online sites? Why not try to create your own website. In building my website, I learned several things to be considered. Sometimes, we jump into conclusions when it comes to building a website that often results to a disaster. Hence, before trying to build a website, here are some of the factors you need to think of first.

  Read the article

• Restore Gene : Automating SQL Server Database Restores

  Restore Gene is a simple 2-script framework, one PowerShell script and one SQL stored procedure, which will speed up the production of restore scripts for manual disaster recovery, as well help automate log shipping. FREE eBook – "45 Database Performance Tips for Developers"Improve your database performance with 45 tips from SQL Server MVPs and industry experts. Get the eBook here.

  Read the article

< Previous Page | 42 43 44 45 46 47 48 49 50 51 52 53  | Next Page >