Search Results

Search found 10952 results on 439 pages for 'drive'.

Page 46/439 | < Previous Page | 42 43 44 45 46 47 48 49 50 51 52 53  | Next Page >

  • Video stutter when using external drive

    - by psion
    When using boxee to play video files off of an external western digital 1TB drive formatted NTFS, I notice a slight stutter in the video every 5-10 seconds. When using mplayer, it doesn't stutter as often, but it still stutters occasionally. If I play the video off of the local sata drive, it plays fine even in boxee. I use this computer as my HTPC and I just switched from windows to linux on it. In windows, I never had any sort of stutter playing movies from the drive. I am using the latest intel graphics drivers (for the intel GMA 950) root@eee-htpc:/home/htpc# grep wd /etc/mtab /dev/sdb1 /mnt/wd2 fuseblk rw,nosuid,nodev,allow_other,blksize=512 0 0 I notice that despite trying to use ntfs or ntfs-3g, ubuntu uses ntfs-fuse which I've heard is slower. /dev/sdb1: Timing buffered disk reads: 80 MB in 3.07 seconds = 26.08 MB/sec root@eee-htpc:/mnt/wd2# dd if=/dev/zero of=./120mb bs=1024 count=120000 root@eee-htpc:/mnt/wd2# time mv ./120mb /home/htpc real 0m2.095s user 0m0.016s sys 0m0.736s Even though fuse has a reputation for being slow, it should easily be fast enough for playing standard definition video files. So why the video stutter? edit: The issue seems to be overhead cpu usage from either playing off of a usb device or ntfs/fuse. Watching CPU usage with top, local files use 10-40% CPU. Watching the same video on the external formatted ntfs, it spikes to 170% (over 100% because of hyperthreading). To me it seems like it must be overhead from the fuse driver, though I don't know if it has more or less overhead than ntfs-3g. It's a EEEBox B202 that has an atom 270, so not exactly the most powerful out there. edit2: I believe the solution would be to use non-fuse drivers or different fuse drivers. so far I have not been able to. edit3: I've probably edited this more times than I should, but as an update I have upgraded ntfs drivers to ntfs-3g 2010.8.8 external FUSE 28 - Third Generation NTFS Driver using the following PPA - ppa:x3lectric/team-iquik-releases. When first opening a video file in boxee that's on ntfs there's still the same amount of lag. After a few minutes of video, the lag seems to go away and the cpu usage comes down to 10-40%. Every so often though, it begins to stutter again. Also, if I skip ahead/back in the file, it begins to stutter a lot.

    Read the article

  • how to access shared external drive connected by usb to Airport Extreme Router

    - by Nathaniel
    I have an external hard drive connected to my Airport Extreme. I keep my photo and music files on it and can access them from both a Mac PowerPC and a Windows XP machine. For some reason I can find, much less connect to, it on my Ubuntu 10.10 machine. I can see my router in the "network" folder but can't seem to find and connect to the shared drive. Any help would greatly appreciated. I am somewhat of a novice with Ubuntu and networking. Thnaks, Nathaniel

    Read the article

  • Changing file permissions on USB external hard drive

    - by pacomet
    I am using an external USB hard drive for a long time in Ubuntu 10.04, both at work and at home. Now I've installed 12.04 at home. Today I used the USB drive for the first time. I can read the disk but can't change the permissions of a file I wanted. Output of "mount" /dev/sdb1 on /media/FREECOM HDD type vfat (rw,nosuid,nodev,uid=1000,gid=1000,shortname=mixed,dmask=0077, utf8=1,showexec,flush,uhelper=udisks) What I try sudo chmod u+w bsst-hdf_to_bsst-h5 and what I get -rw-r--r-- 1 paco paco 2956 dic 19 10:27 bsst-hdf_to_bsst-h5 Any idea would be appreciated. Thanks in advance

    Read the article

  • Booting From USB Problem

    - by Rob Barker
    I'm trying to boot Ubuntu 10.12 from a usb memory stick in a first time installation, but i keep getting a message preventing me from progressing any further. It says this. SYSLINUX 4.06 EDD 4.06-pre1 Copyright (c) 1994-2012 H.Peter I've reordered my bios boot priorities correctly so the usb loads before the hard drive. My hard drive is faulty, but i am getting a new one tomorrow. Any ideas? Help would be much appreciated.

    Read the article

  • How To Boot 10 Different Live CDs From 1 USB Flash Drive

    - by YatriTrivedi
    Ever get the urge to try out a bunch of Linux distros at once? Maybe you’re hosting a Linux installation party. Here’s an easy way to get a bunch of Live CDs working from a single thumb drive Latest Features How-To Geek ETC How To Boot 10 Different Live CDs From 1 USB Flash Drive The 20 Best How-To Geek Linux Articles of 2010 The 50 Best How-To Geek Windows Articles of 2010 The 20 Best How-To Geek Explainer Topics for 2010 How to Disable Caps Lock Key in Windows 7 or Vista How to Use the Avira Rescue CD to Clean Your Infected PC Tune Pop Enhances Android Music Notifications Another Busy Night in Gotham City Wallpaper Classic Super Mario Brothers Theme for Chrome and Iron Experimental Firefox Builds Put Tabs on the Title Bar (Available for Download) Android Trojan Found in the Wild Chaos, Panic, and Disorder Wallpaper

    Read the article

  • Migrate 12.04 Wubi install to new partition with corrupted win7 install and small hard drive

    - by Robin Clark
    The move from Win7 to Ubuntu 12.04 has been honestly awesome. But I've come into a snag because my Win7 inevitably broke. I can still boot into Ubuntu even though Win7 is broken (won't boot, can't repair). I'd like to Migrate Wubi to a real partition and forget about windows. Presumably under normal conditions I would run the Ubuntu live CD, create a new partition then log back into my Wubi install and migrate using the script to the new partition. But I'm worried if I do that I'll break my current wubi set-up and be unable to migrate. I have a small hard drive, only 75GB and unfortunately my backup drive recently died so can't migrate there first and transfer over either. Does anybody have any suggestions to solve this?

    Read the article

  • Google I/O 2012 - Deep Dive into the Next Version of the Google Drive API

    Google I/O 2012 - Deep Dive into the Next Version of the Google Drive API Ali Afshar, Ivan Lee This session discusses a number of best practices with the new Google Drive API. We'll cover how to properly sync files, how to manage sharing, and how to make your applications faster and more efficient than ever before. We'll go through an entire working application that exposes best practices. For all I/O 2012 sessions, go to developers.google.com From: GoogleDevelopers Views: 17 0 ratings Time: 45:50 More in Science & Technology

    Read the article

  • How a Hard Drive Works in Slow Motion [Video]

    - by Asian Angel
    This short video lets you have a good luck at a hard drive in slow motion as the actuator arm moves across the disk and then water is added to the equation as well… How a Hard Drive works in Slow Motion – The Slow Mo Guys [via BoingBoing] HTG Explains: What Is Two-Factor Authentication and Should I Be Using It? HTG Explains: What Is Windows RT and What Does It Mean To Me? HTG Explains: How Windows 8′s Secure Boot Feature Works & What It Means for Linux

    Read the article

  • Using RSYNC to Replicate Synology NAS DS710+ to Windows 7 Hard Drive

    Learn how to use a local backup drive on your windows 7 system to replicate the data on any or all of your directories on your Synology NAS (Network Hard Drive Device) DS710+.  This post will... This site is a resource for asp.net web programming. It has examples by Peter Kellner of techniques for high performance programming...Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

  • Dual-boot computer won't boot without external hard drive

    - by FrankP
    I have Ubuntu loaded on my external HDD. I tried to unplug the external drive so that this way I could run Windows as the default OS to boot when the computer turns on, but it gives me an error. I need to know how I can make it so that when my computers boots it stops saying Error: no such device: (a whole bunch of numbers and letters) then it says grub rescue>_. If I plug the external HDD in, and I let Ubuntu run the boot process, then it gives me a list of OS's/ HDD's to choose from and Windows 7 is there. The only problem is that I want Windows be my default OS, not the other way around. P.S. I have found that I dislike Ubuntu because I can't even figure out how to install the necessary programs to learn how to start writing Ruby On Rails. So installing it was a waste of my time, in my opinion. Now that I have it on the external hard drive, I will leave it installed though. I just dont want to have to keep that external drive plugged in to my computer all the time. Thank you a ton to whoever can help me! Thank you for the detail'd instructions. I am doing my best to follow you and it makes sense when I read it but, Rescatux is not doing what you said it would. None of the options you said would appear are not there. On my screen there is 4 options when MBR run's none look familiar and when I picked the best possible option based on my educated guesses it said success. I tried to restart my computer and it said Please insert windows recovery disc and hit enter. Problem being I don't have the windows recovery disc. I bought my computer from a local Computer tec and he loads windows on it for you. I have no time to run my compute over to him as sunday is my only day free. I think that I just wrecked my computer in the process of this attempted fix windows refuses to boot now WITH or WITHOUT the HDD. Please help this is getting out of hand

    Read the article

  • Ubuntu missing from hard drive boot

    - by Eoghan
    Ubuntu is the only OS installed on my Acer netbook. Few, if any, problems until, with no warning, it vanished from the boot list for the hard drive. I have been a ble to create a bootable USB to be ablee to use the netbook but have not been able to restore Ubuntu to the hard drive boot list. As you can probabaly tell from the way the problem is described, I am a complete novice so any help you can give should assume no knowledge at all on my part and should be written as if for a simpleton. Thank you.

    Read the article

  • Mounting ntfs windows drive and retrieving its data

    - by Sarmad
    Hej, A friend gave me his laptop which had problems with booting (windows). He claims his data on the drive to be retrieved and saved. I have Linux Ubuntu Server to mount its hard drive and check the contents. Now when I have mounted it I see only boot.sdi, sources, System Volume Information I have no idea why is it so? How can I access and retrieve the contents? results of sudo fdisk -l are as follows: Enhet Start Början Slut Block Id System /dev/sdb1 2048 3074047 1536000 27 Hidden NTFS WinRE /dev/sdb2 * 3074048 246945791 121935872 7 HPFS/NTFS/exFAT /dev/sdb3 246945792 416354295 84704252 7 HPFS/NTFS/exFAT /dev/sdb4 416354304 488394751 36020224 f W95 Utökad (LBA) /dev/sdb5 416356352 488394751 36019200 7 HPFS/NTFS/exFAT Please help me in this regard.

    Read the article

  • No boot option after installing ubuntu 12.04 inside windows xp and drive h: is also gone

    - by Lynch
    My H: Drive is gone. After after installing Ubuntu 12.04 inside windows. When I installed Ubuntu 12.04 from USB inside windows in drive H: ( dev/sdv7) when the installation finished it said to restart, when I restarted I did not see an option to boot Ubuntu or windows. When it automatically booted into windows my H: drives is also gone. Now how can I dual boot to choose whether to boot Ubuntu or Windows. It shows nothing when the installation is finished and when I restarted my pc.

    Read the article

  • Ubuntu not booting from USB on laptop (no optical drive)

    - by Jamie
    I'm using a Kingston 16GB USB, with the Unetbootin program. (I've tried both downloading the installation iso manually and adding it, or using the program to download.) I've tried creating the bootable USB on an iMac, the laptop and also a desktop. I've booted into the setup of the laptop and changed the boot order to make sure it boots from that drive first. (There is no optical drive so that isn't a problem.) It's an Acer Aspire AS3810TZ. Upon booting it gives this message: SYSLINUX 4.03 2010-10-22 EDD Copyright (C) 1994-2010 H. Peter Anvin et al I get this no matter how I create the USB, it just sits there. I left the laptop for an hour and it hadn't moved. I've also tried on a different 4GB USB (Generic) and that did the same.

    Read the article

  • Lost the Hard Drive Icon from the Launcher

    - by Elbe
    I unlocked the C Drive icon connected to the Launcher. Once I moved it onto the desktop, it disappeared. In attempting to create an new icon, I was asked to create a mount point. The mount point directory then showed 2 links rather than the normal 1. I trolled the web for solutions, but I did not find one that addressed any of the stated issues. I attempted to find a solution to reconstruct the hard drives that were found during the install and listed in the Launcher but was unsuccessful in doing so. In summary, I would like to restore the /media directory to the original install which listed the drives correctly and have the drive icons appear in the Launcher as they did at the time of the installation of Ubuntu. I found where all the other icons in the Launcher located in the home Desktop directory but could not find anything that listed the hard drives or the floppy. Ubuntu 12.10 is installed and all the latest updates have been applied.

    Read the article

  • New hard drive means re-install everything

    I recently found a good deal on a 7200 RPM 500GB latpop drive and decided to upgrade myself to that. Ive been operating on a 150GB drive for a long time and hadnt been cleaning up old projects, encodings, etc. so it was running thin on space. This was a cheap upgrade (< $90) so I opted for it. I finally got a moment last evening to pop it in and start the fresh installs of everything. Doing so reminded me of how long this process takes for us geeky people. Luckily I do a backup first using my...Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

  • new hard drive on Dell Adaptec 2610SA 6 port SATA RAID PCI card

    - by Ragnarok85
    I have a Dell Adaptec 2610SA 6 port SATA RAID PCI card with 3 hard drives on it and everything works fine. I plugged another hard drive to it and the system (Ubuntu 12.04, 64 bit) seems not to recognize it. Strange thing is that, as happened in the past, if I re-install the system, it recognizes the new hardware plugged to RAID card. Of course I don't want to re-install ubuntu each time I plug a new hard drive on my RAID card. Any idea? Thank you in advance

    Read the article

  • Desparately Need Help: After a mishap, a folder shows 0 files in it

    - by bobby
    I'm hoping some of you guys may be able to shed some light on this scenario: I had a odt document on which I was working from one of many files in a folder among many on an internal hard-drive. Some kind of glitch occured and the document crashed (this could have been some kind of power charge whilst another hard drive was being unmounted). As I looked into the folders surrounding the folder in which my odt document was stored, they start to show 0 files in them. I immediately switched off the PC and then re-started. Upon the re-start, the folders would show the 1,000s of files I've stored in them and then within 5 minutes, as I started to back them up, freeze, cut-off the process of transfer. When I tried to open anything on the internal hard-drive, be it an avi film, an mp3, a cbr or a word doc, they all showed blank or would work. Some folders had vastly less files showing. Eventually, things calmed down. I closed the PC, checked that the connections were in firmly, gave it a vacuum and restarted the PC. All the files eventually showed up and I started to back them up (which I'd brought a hard drive for anyway but been distracted and not done). All folders show except the one which contained the document I was working on at the time of the trouble. Strangely, it was one that should itself full on several occasions on restarts. It shows zero files now. Properties shows zero files and zero space taken by it. Yet when I drop a file into this folder by pasting it in, it disappears too. Opening the folder, there is nothing there. But if I paste that document again, the PC asks would I like to replace the existing file with the same name (that I can't see), when I click yes, the file appears. When I exit, the folder shows the 0 files in the folder. Going back into the folder, it has disappeared again. I'm hoping that someone can help give me tips to recover the files in the folder, it would be greatly, greatly appreciated. All other films, music, comics, documents show and are fine!

    Read the article

  • Installing Ubuntu via Wubi - about SSDs and HDDs

    - by A Person
    I read the question in regards to installing Ubuntu with Wubi on an SSD ( How do I enable Trim on an SSD in a Wubi install under Windows 7? ). My Windows installation is on an SSD (C: drive). My question is, if I choose to let Wubi install Ubuntu on my D: drive (HDD), thus creating the root.disk-file on D:, would I need to worry about TRIM in any way? I would assume not, but I just want to be sure.

    Read the article

  • install a specific ubuntu version

    - by Dariopnc
    What I'd like to do: have Ubuntu installed on a USB drive and from there install any ubuntu version on a hdd. This is kinda different from using usb-creator because I'd like to have a persistent ubuntu install on the USB drive and not upgrade it every 6 months. From there I'd like to be able to install the most recent ubuntu version. I think it's just a matter of configuring ubiquity, but don't know if this is the case and how exactly do this.

    Read the article

  • External hard drive failing, is backup recovery possible?

    - by backitup
    I have a Seagate Freeagent external hard drive. While I was backing it up on Windows XP my pc crashed and I received the horrifying "Delayed Write Error" when I rebooted citing "$MFT" and a few other files. I tried to unmount it, but to no avail. Now my pc just crashes when I try to access it via Windows. In Ubuntu I am able to view it through disk utility. SMART status is "DISK FAILURE IMMINENT". Fdisk doesn't work, and the SMART tests fail on "Reallocated Sector Count". Is there any way for me to rescue any of my data. I can still access the drive but as soon as I do that it crashes.

    Read the article

  • usb drive filesystem?

    - by purbleguy
    So, school is approaching quickly, and one of the things on my supply list is a usb drive. Now I'm asking myself what filesystem to use. After some research, I found ext4 to be the most stable drive filesystem. But, I also found that Windows (The OS used by every computer in my school) can't read ext4 formatted drives without special drivers, and I'm sure the school wouldn't be too happy with me having to install the windows ext4 drivers on every computer I use with my usb. So, my question is, Should I use fat32, one of the ext filesystems (2, 3 or 4 would work) or NTFS, I have an ubuntu laptop, a Mac desktop, and of course the school computers I use are Windows, so which would be the best filesystem for my usb.

    Read the article

  • Dell Latitude D830 DVD Drive Not Recognized

    - by DragonFire
    Unlike some people who have issues with the video or WiFi drivers, I suffer from not being able to use the DVD drive on this laptop. Upon POST, the BIOS sees it and I am able to open the tray as well; however, once the system starts to load up Ubuntu or other distros (Debian and Linux Mint), I lose all functionality. Plus, I don't see it listed as a device in the OS. I've poured over the internet the past few days trying to see if anyone else has the issue, or did and found a solution but sadly, nothing anywhere so far. So, I thought I would ask the community here and see what you all think. Worse case scenario, I have some dead weight to a nice little machine. Thanks! PS I honestly think Linux doesn't like the IDE interface the disc drive has.

    Read the article

  • Languages and tools that are "portable" (work well from a USB storage drive) [closed]

    - by CodexArcanum
    I'm a huge fan of running programs from my portable hard drive: it means I always have my favorite tools no matter what computer I'm on. Sadly, development tools seem to be hard to get portable at times. I recently realized that the "portable" version of MinGW I was using off my USB drive was actually interfering with a locally installed version of MinGW, so sometimes even the tools you think are portable, aren't. So what are the best portable development tools that you've used? What runs well on a portable media, leaves the host machine clean, and generally makes moving around easier for you?

    Read the article

< Previous Page | 42 43 44 45 46 47 48 49 50 51 52 53  | Next Page >