Search Results

Search found 12028 results on 482 pages for 'drive letters'.

Page 46/482 | < Previous Page | 42 43 44 45 46 47 48 49 50 51 52 53  | Next Page >

  • Accidentally dd'ed an image to wrong drive / overwrote partition table + NTFS partition start

    - by Kento Locatelli
    I screwed up and set the wrong output for dd when trying to copy a freenas iso, overwriting the wrong external hard drive. Ironically, I was trying to setup a freenas server for data backup... External drive is only used for data storage, system is entirely intact Drive had a single NTFS partition filing the entire device (2TB WD elements) Drive originally had an MBR partition table. Drive now shows as having a GPT, presumably from the freenas image. Drive was mounted at the time, with maybe a couple kB of data written/read after running dd Drive is just a few months old and healthy (regular SMART / fs checks) I have not reboot the OS (crunchbang) /proc/partition still holds the correct information (and has been stored) Have dd's output (records in / out / bytes) testdrive did not find any partitions on quick or deep search running photorec to recover the more important data (a couple recent plaintext files that hadn't been backed up yet). Vast majority of disk content ( 80%) is unnecessary media files. My current plan is to let photorec do it's thing, then recreate the mbr with gparted and use cfdisk to create another NTFS partition using the sector information from /sys/block/.../. Is that a good course of action (that is, a chance of success)? Or anything else I should try first? Possibly relevant information: dd if=FreeNAS-8.0.4-RELEASE-p3-x86.iso of=/dev/sdc: 194568+0 records in 194568+0 records out 99618816 bytes (100 MB) copied grep . /sys/block/sdc/sdc*/{start,size}: /sys/block/sdc/sdc1/start:2048 /sys/block/sdc/sdc1/size:3907022848 cat /proc/partitions: major minor #blocks name ** Snipped ** 8 32 1953512448 sdc 8 33 1953511424 sdc1 current fdisk -l output: WARNING: GPT (GUID Partition Table) detected on '/dev/sdc'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sdc: 2000.4 GB, 2000396746752 bytes 255 heads, 63 sectors/track, 243201 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/sdc doesn't contain a valid partition table

    Read the article

  • USB drive was bootable, but no longer boots

    - by i-g
    I'm trying to install a new OS onto a computer from a bootable USB stick. I previously installed Ubuntu Linux and it was a piece of cake -- I downloaded the ISO image, used UNetbootin to copy it to the USB drive and make it bootable, and that was that. Now, however, no matter what I try, I can't make the same USB drive bootable again! I've tried formatting it as FAT32 and NTFS. I've tried several different Linux distributions and Windows 7. I've tried using UNetbootin, Windows 7 USB Download Tool, WinToFlash, and manually making it bootable with diskpart/bootsect/bootrec. (Yes, I've tried bootsect /nt60 x: /force.) None of this seems to be working! When I try to boot from the drive, the machine reads from it (I can see the drive's LED blinking) and then gives me the same "Insert system disk and press Enter" message. (I've disabled booting from the hard drive.) Am I missing something I need to do to make the USB drive bootable again? I think it lost some pixie dust when I formatted it with the standard Windows formatting tool (it was quicker than deleting files), but I have no idea what it was or how to get it back. The USB drive in question is a SanDisk Cruzer 8GB SDCZ6. The computer I'm working on is running Windows Vista SP1.

    Read the article

  • USB drive was bootable, but no longer isn't

    - by i-g
    I'm trying to install a new OS onto a computer from a bootable USB stick. I previously installed Ubuntu Linux and it was a piece of cake -- I downloaded the ISO image, used UNetbootin to copy it to the USB drive and make it bootable, and that was that. Now, however, no matter what I try, I can't make the same USB drive bootable again! I've tried formatting it as FAT32 and NTFS. I've tried several different Linux distributions and Windows 7. I've tried using UNetbootin, Windows 7 USB Download Tool, WinToFlash, and manually making it bootable with diskpart/bootsect/bootrec. (Yes, I've tried bootsect /nt60 x: /force.) None of this seems to be working! When I try to boot from the drive, the machine reads from it (I can see the drive's LED blinking) and then gives me the same "Insert system disk and press Enter" message. (I've disabled booting from the hard drive.) Am I missing something I need to do to make the USB drive bootable again? The USB drive in question is a SanDisk Cruzer 8GB SDCZ6. The computer I'm working on is running Windows Vista SP1.

    Read the article

  • Why doesn't the installer see all of my hard drives?

    - by atodd
    I'm trying to setup a dual boot system with Windows Vista 64 (already installed) and Ubuntu 10.10. I added a new drive which is identical to the one Vista is installed on. When I boot into the LiveCD I can see and mount the second drive and edit it in Gparted. However, when I use the installer it will only bring up the drive that already has Vista installed. I've tried everything I know. I'm not sure if its a BIOS setting or something else I've missed. I've also tried both the desktop and alternate amd64 installs with the same result.

    Read the article

  • INACCESSIBLE_BOOT_DEVICE after installing Linux on same drive

    - by kdgregory
    History: My PC was configured with two drives: an 80G on IDE 0 Primary that was running Win2K, and a 320G on IDE 0 Secondary that was running Linux (Ubuntu). I decided to pull the 80Gb drive out of the system, so dd'd the entire 80 G drive (/dev/sda) onto the 320 (/dev/sdb) -- this included the MBR and partition table. Then I pulled the drive, plugged the 320 into IDE 0 Primary, and rebooted. The Windows partition worked at this point. Then I installed Ubuntu into the remaining space on the 320. It works. However, when I try to boot into Windows, I get a BSOD with the following message: *** STOP: 0x0000007B (0x89055030,0xC000014F,0x00000000,0x00000000) INACCESSILE_BOOT_DEVICE Before the BSOD I see the Win2K splash screen, and it claims to be "starting windows" for a couple of seconds -- so it appears that the first stage boot loader is working as expected. Ditto when I try booting in Safe Mode. After reading the Microsoft KB article, I booted into the recovery console and tried running chkdsk /r. It refused to run, claiming that the drive was corrupted (sorry, didn't write down the exact error message). However, I can mount the drive from Linux, and access all files. And for what it's worth, I can scan the drive using the Linux "Disk Utility" (this is Ubuntu, the menus don't show real program names), it claims the drive to be clean. The KB article mentioned that boot.ini could be the problem, so here it is: timeout=10 default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS [operating systems] multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows 2000 Professional" /fastdetect Any pointers on what to do next?

    Read the article

  • How do I restore GRUB 2?

    - by uahug
    I upgraded my laptop with an SSD, moving my old HDD to where the DVD-drive was, so that I could have speed and storage. Now, I have reinstalled Ubuntu on the SSD, deleting all the partitions on the old HDD to make space for a data partition. But now the laptop doesn't even get to GRUB 2 if the HDD is plugged in! If I take it out, everything works, but as soon as I plug it in and retry to boot, I won't find GRUB. At first, I thought it was because of the boot order, but the order was OK: first the notebook hard drive (SSD) and then the CD/DVD drive (which in reality is the HDD). How can I fix it? Doing a simple grub-install /dev/sda doesn't work.. The SSD is sda, and the HDD is sdb.

    Read the article

  • Fixing Windows install by connecting it's hard drive via USB to a different laptop

    - by Jason
    I tried to upgrade a laptop to SP3, which broke it. I later found out SP3 doesn't work on that 2002 laptop. I can't uninstall SP3, or fix SP2, because the hard drive is now not detected during setup (I've read that's the problem you get). I put the hard drive in a USB drive case and plugged it into my other laptop, and I can read (& write to) the disk okay. (The hard drive won't fit in my other laptop, so I'm using USB.) I need to get that disk back to SP2, or fix whatever files got screwed up causing the disk to not be recognized. I don't want to do a re-install as there are 80GB of files on it I need, and they won't fit on the HD of my other laptop, and also because I no longer have some of the install CDs for software on it. What do I need to do to fix that drive from my other laptop? (I don't want my working laptop (XP SP3) to get screwed with by putting an SP2 disk in the CD drive, or the non-o/s data on the other hard drive screwed with.)

    Read the article

  • Fixing Windows install by connecting its hard drive via USB to a different laptop

    - by Jason
    I tried to upgrade a laptop to SP3, which broke it. I later found out SP3 doesn't work on that 2002 laptop. I can't uninstall SP3, or fix SP2, because the hard drive is now not detected during setup (I've read that's the problem you get). I put the hard drive in a USB drive case and plugged it into my other laptop, and I can read (& write to) the disk okay. (The hard drive won't fit in my other laptop, so I'm using USB.) I need to get that disk back to SP2, or fix whatever files got screwed up causing the disk to not be recognized. I don't want to do a re-install as there are 80GB of files on it I need, and they won't fit on the HD of my other laptop, and also because I no longer have some of the install CDs for software on it. What do I need to do to fix that drive from my other laptop? (I don't want my working laptop (XP SP3) to get screwed with by putting an SP2 disk in the CD drive, or the non-o/s data on the other hard drive screwed with.)

    Read the article

  • Why doesn't the Ubuntu Installer see all of my hard drives

    - by atodd
    I'm trying to setup a dual boot system with Windows Vista 64 (already installed) and Ubuntu 10.10. I added a new drive which is identical to the one Vista is installed on. When I boot into the LiveCD I can see and mount the second drive and edit it in Gparted. However, when I use the installer it will only bring up the drive that already has Vista installed. I've tried everything I know. I'm not sure if its a BIOS setting or something else I've missed. I've also tried both the desktop and alternate amd64 installs with the same result.

    Read the article

  • Is there a performance difference between Windows 7 on SSD installed from scratch versus it using a recent ghost/clone drive image from a harddisk?

    - by therobyouknow
    I'm planning to upgrade a notebook PC to a Solid-State Flash Drive (SSD) soon. I want to use the notebook before that and am considering installing Windows 7 on the hard disk (spinning variety, 5400rpm) before I get the SSD. To save time I am wondering if I can ghost/clone the installation of Windows 7 from the hard drive and put on the SSD. Would the performance of this clone from the harddisk onto the SSD be different from starting again and reinstalling Windows 7 from scratch on the SSD? (Windows 7 32bit professional)

    Read the article

  • What are "Excess Fragments" in defragmenting a hard drive?

    - by Andrew Swift
    I'm defragmenting my hard drive (XP SP3) with PerfectDisk 7.0, and it finds 816,659 excess fragments when I ask for an analysis. [update] Specifically, it shows that the 1TB disk is 14% fragmented with 19693 fragments and 816,659 excess fragments. About 20% of the disk is still free space. What does excess fragments refer to? What is the difference between fragments and excess fragments? I have had problems in the past where I defragmented a fragmented disk and many files were corrupted. It seemed as though "excess fragments" referred to orphan pieces, where the program couldn't find out where to put them. If that was true, then defragmenting a disk resulted in many incomplete files, and in fact I defragmented a disk full of MP3's and got a lot of corrupted files as a result. Instead, I started to simply format a separate disk and copy everything from one to the other. That way there were no orphan bits, and no file corruption. Does anybody know what "excess fragments" really are?

    Read the article

  • If I partition a drive connected via eSata will it show different partitions when connected via USB?

    - by jeffreypriebe
    I have an odd problem with an external drive. I'm formatting it connected to my laptop prior to connecting it to my router. The HDD enclosure has both an eSata and USB connections. Generally, I connect it via eSata to my laptop. I created my partitions and connected it to the router, but I see partition information that is different than what I created. After chasing leads concerning large HDD size, I mindlessly connected the HDD to my laptop with USB. Lo! I see the same partitions as the router. Attached are screenshots using the same program and the HDD in question. The only difference is the connection. For the first, I connected via eSata and hit "refresh" on the partition program. Then, turned off the HDD, disconnected the eSata cable, and connected via USB. Power and refresh. eSata: reports a total HDD size of 2328 GB, with four partitions (the third being 1.96TB) USB: reports a total HDD size of 280 GB, with three partitions (the third being 279 GB) Any idea why this is happening? It looks like it clearly is an issue of the 4K sector size and not playing nice with the USB enclosure. I tried it eSata and USB in Windows and Linux and it appears consistently that eSata is reporting correctly, USB incorrectly.

    Read the article

  • Are there any disadvantages of having a "free fall sensor" on a hard disk drive?

    - by therobyouknow
    This is a general question that came out of a specific comparison between the Western Digital Scorpio WD3200BEKT and Western Digital Scorpio WD3200BJKT (which is the same as the former but with a free fall sensor.) Note: I'm not asking for a review or appraisal of these specific drives, as the general question does apply on other brands as well. Though your input would help my decision. To break down the general question in order to answer it, I would be looking for comments on things like: if it's necessary to have differing physical dimensions between free fall sensor drives and those without, e.g. does it make it any thicker, and therefore reduce the systems where it can be installed - particularly smaller laptops? does it actually make the system less reliable - because of false alarms whereby the drive thought the laptop was falling but it wasn't? I suppose that the fact that a manufacturer produces both drives with and without free fall sensors says something about possible disadvantages. Or it could be standard marketing techniques where by making drives with and without results in larger sales volume than just those with the feature alone.

    Read the article

  • CD/DVD Drive not detecting locally burned CD/DVDs, but works fine with Genuine discs.

    - by Rahul
    I'm using Dell Inspiron 1420 - 32 Bit - Windows Vista, since 2.5 years. I'm facing a strange problem with my CD/DVD-drive. I cannot run/play a CD/DVD which I get burned from my friends. But when I insert Genuine CD, I'm able to play/run it. And when I try to install my Vista package which I got with my notebook, the CD/DVD gets loaded. If I insert a CD/DVD which I get from my friend, CD doesn't get loaded and the system gets hanged. But all these CDs/DVDs work on other systems. I've tested it on many of my friends PCs. So, now I'm able to run only genuine CDs & a few genuine DVDs. My Experience/Experiments: I tried to install Windows Vista using Genuine DVD - It worked I tried to install Ubuntu which I got from shipped from Canonical Ltd. - It worked I tried to install OpenSUSE .iso file burned to a DVD in my friend's PC - It didn't work for me (But working perfectly fine in my friends PCs(Tested in 4 other PCs) Tried to play a DVD containing movies, burned in my friend's PC - It didn't work for me (But working perfectly fine in my friends PCs Any help/suggestions would be appreciated. Thanks.

    Read the article

  • Can I clone my hard drive to an external and boot from the clone?

    - by willbuntu
    First thing: I am not asking what software I'm supposed to use. I already know the answer: Ghost (proprietary), Clonezilla, and dd (if I'm careful). What I really want to know is if it is possible to (essentially) bit-for-bit clone my entire installation (OS, installed software, activation(s), etc.) to an external USB hard-drive, and then boot off of that (if I need to, I know how to edit BIOS settings and use Plop boot manager), and work with it day-to-day as if there was virtually no difference from using my internal HDD now. Again, I'm not asking how to install Windows to an external (because I know I'd need to do some special workaround), I'm asking if I can clone everything and boot off of it. In case you're wondering why I'm going to this trouble: I'm using a Lenovo Essentials laptop that has an unmodifiable partition table (due to recovery crap), and has all 4 of its partitions spoken for (3 primary, one extended, cannot change the extended). Anyway, my thought is that if I can clone everything and boot off of it when I need to, and just have a Linux distro on the internal HDD, then that could work.

    Read the article

  • C# Textbox validation should only accept integer values, but allows letters as well

    - by sonny5
    if (textBox1.Text != "") // this forces user to enter something { // next line is supposed to allow only 0-9 to be entered but should block all... // ...characters and should block a backspace and a decimal point from being entered.... // ...but it is also allowing characters to be typed in textBox1 if(!IsNumberInRange(KeyCode,48,57) && KeyCode!=8 && KeyCode!=46) // 46 is a "." { e.Handled=true; } else { e.Handled=false; } if (KeyCode == 13) // enter key { TBI1 = System.Convert.ToInt32(var1); // converts to an int Console.WriteLine("TBI1 (var1 INT)= {0}", var1); Console.WriteLine("TBI1= {0}", TBI1); } if (KeyCode == 46) { MessageBox.Show("Only digits...no dots please!"); e.Handled = !char.IsDigit(e.KeyChar) && !char.IsControl(e.KeyChar); } } else { Console.WriteLine("Cannot be empty!"); } // If I remove the outer if statement and skip checking for an empty string, then // it prevents letters from being entered in the textbox. I need to do both, prevent an // empty textbox AND prevent letters from being entered. // thanks, Sonny5

    Read the article

  • How to mount a drive in Ubuntu from terminal

    - by Mirage
    hi, I want to mount a drive from terminal at start up. At start if i use ls /media then its empty but if i go to computer and then click VM drive there and after that i use ls /media then it shows VM drive . How can i mount that drive at from terminal something like mount VM or how can find the path of VM like /dev/sda or something

    Read the article

  • Why suddenly DOS-type hexadecimal file names?

    - by Marvin Nicholson
    One of the fairly recent folders on my XP SATA data drive suddenly shows DOS-type hexadecimal file names (i.e., eight characters with three-character extensions) I deleted them and now my Recycle bin shows them with a tilde (i.e., 194ABE~1.JPG). The images are all valid but the file names I assigned are gone. (The 2-terabyte SATA data drive has no OS, if that matters.) The last time this happened on an IDE drive, I was able to back up all the remaining files just before the drive died. Am I facing the same scenario now with my 2-terabyte SATA data drive? It is only a couple of years old. Should I quickly buy another one and back up 20 years of files to it before my current drive dies?

    Read the article

  • Strange behaviour of Apache with network drive

    - by AMIT
    Hii all, Am runnnig Apache web server in front of mongrel server and mapped a network drive on my system.In my application miongrel is doing file upload to network drive and apche is serving file from network . But i disconnected the network drive and what strange behaviour am getting still am able to uplaod as well as download files to and from network drive .could anyone tell me why is it so. Am on windows NT machine

    Read the article

  • SMPS stops when I plug in a SATA drive?

    - by claws
    Hello, Part 1: my first question is all the 4 wire power connectors (intended for hardisks/dvd drives not mother board) are same. Right? I've been using all of them same and I had no problem for years. Yesterday I borrowed a SATA disk from my friend and connected it my computer using Sata Power adaptor (4 wire) and when I switched on the computer. There were fumes coming out of the connector. I immediately turned it off (in just one second). I tested the voltages in the 4 wire power connector of my SMPS: They were 5.3v & 12.2V. I couldn't measure the current. But my SMPTS label reads: DC Output: 3.3v (25A) +5v (32A) -5v (0.3A) +12V (17A) -12V (0.8A) And the SATA hardisk label reads Input: +5v (0.72A) +12V (0.52A) I'm shocked! I never noticed this. Does the "sata power adaptor" scale down the current to required? If it doesn't, I've been connecting same way for years. I never had any problem. This is the first time I'm encountering it. Part 2: I wanted to return the drive to my friend. He has two hard disks, SATA & PATA. Its the SATA that I borrowed. When he usually switches on. The CPU fan starts & then stops for a sec and starts again and continues working. That was the earlier situation. I don't know why it stops & starts? Well, Now when I connect this SATA disk and switch ON the computer. CPU fan starts (just for an instant, not even a 0.5 sec) and stops. It doesn't start again, I mean the power from SMPS has stopped. But if I disconnect this SATA disk. It works fine. What seems to be the problem? I've no idea about why there were fumes or why his SMPS starts & stops giving power? What is its relation with the SATA disk connection?

    Read the article

  • Win7 - DVD drive spins up but fails to read, fails write

    - by MA
    Running Windows 7 x64. DVD drive is a BenQ DC DQ60 ATA dvd-dl rw. Everything functions correctly in linux, and I can boot to cd/dvds, so the drive itself does work. Symptom: when I insert any CD or DVD (burned or retail), the drive spins up the disk, and (usually) displays the disk title in My Computer, but just continues to spin indefinitely. I cannot browse the disk in the drive, install from it, or read anything.

    Read the article

  • Slow solid state drive on laptop running Linux

    - by wcyang
    I installed a solid state drive on my laptop, but I don't get the blazing speeds which people write about. My system: Laptop: Acer Aspire 7552G-6061 Solid state drive: Crucial 256GB M4 CT256M4SSD2 Operating system: Linux (Trisquel 5.5, a derivative of Ubuntu) I am using AHCI. I installed the operating system onto the solid state drive (as opposed to copying it). How can I make the solid state drive faster? Could the problem be with the block or sector alignment?

    Read the article

  • Powershell mapped network drive doesn't persist

    - by Davidw
    I'm trying to create a script that maps a network drive whenever I connect to a VPN, then disconnects the drive when I disconnect from the VPN, using Task Scheduler to launch the script when the event is created. It launches the script, which creates the drive, but when Powershell closes, it disconnects the drive, so it only stays open for a few seconds, then closes it again. I have the persist parameter specified, but it doesn't persist. New-PSDrive -Name "N" -PSProvider FileSystem -Root \(Serverpath)\ndrive -Persist

    Read the article

  • Why do msi installations use slower drives over faster ones in windows 7?

    - by Joshua C
    I have noticed that the slowest drive in my system is used most during an msi installation. I mainly notice this when running windows updates but it seems to be msi installs in general. The setup I last saw this occur on was running Windows 7 with the following drives: Sata: 240GB SSD NTFS ~515MB/s Operating system drive 1TB NTFS ~110MB/s Firewire: 4TB ExFAT ~80MB/s I would think that windows would choose the fastest drive with available space for temporary files. But it will instead choose the external drive with the slowest transfer speed. I could also understand choosing the 1TB for not being an ssd in an attempt to preserve the longevity of the ssd write capacity. Why does this happen? Is there a way to force these installations to use the OS drive or a specific drive?

    Read the article

  • Win7 x64 unresponsive for a minute or so. HD failing?

    - by Gaia
    On a fully updated Win7 x64, every so often the system stalls for a minute or so. This has been going on for a couple months now. By stalling I mean the mouse responds and I can move windows around, but any window, any program, that is open becomes whiteish when I select it AND any new programs will not open. It doesn't matter what kind of program it is. When the stall stops all clicks I made (open new programs for example) take effect. Nothing shows up consistently (as in every time this happens) in the event log. Today though I was able to find something, but it doesn't reveal much other than the "system was unresponsive". It's a 7009 for "A timeout was reached (30000 milliseconds) while waiting for the Windows Error Reporting Service service to connect." It doesn't matter if I have any USB devices plug-in or not. I've ran Microsoft Security Essentials and Malwarebytes. While the machine is unresponsive, I've noticed that Drive D (the other partition on the single internal HD in this laptop) is displayed like this in explorer. This never occurs with Drive C or any other drive on the machine. . SMART report for the physical drive: Read benchmark by HD Tune 5 Pro, probably the most telling piece of the puzzle. Isn't this alone enough to see there is a problem with the drive, regardless of whether the unresponsiveness is caused by such purported problem? Here is a short hardware report: Computer: LENOVO ThinkPad T520 CPU: Intel Core i5-2520M (Sandy Bridge-MB SV, J1) 2500 MHz (25.00x100.0) @ 797 MHz (8.00x99.7) Motherboard: LENOVO 423946U Chipset: Intel QM67 (Cougar Point) [B3] Memory: 8192 MBytes @ 664 MHz, 9.0-9-9-24 - 4096 MB PC10600 DDR3 SDRAM - Samsung M471B5273CH0-CH9 - 4096 MB PC10600 DDR3 SDRAM - Patriot Memory (PDP Systems) PSD34G13332S Graphics: Intel Sandy Bridge-MB GT2+ - Integrated Graphics Controller [D2/J1/Q0] [Lenovo] Intel HD Graphics 3000 (Sandy Bridge GT2+), 3937912 KB Drive: ST320LT007, 312.6 GB, Serial ATA 3Gb/s Sound: Intel Cougar Point PCH - High Definition Audio Controller [B2] Network: Intel 82579LM (Lewisville) Gigabit Ethernet Controller Network: Intel Centrino Advanced-N 6205 AGN 2x2 HMC OS: Microsoft Windows 7 Professional (x64) Build 7601 The drive less than 1 year old. Do I have a defective drive? Seagate Tools diag says there is nothing wrong with the drive... UPDATE: I noticed that the windows error reporting service entered the running state then the stopped state and the space between the two events was exactly 2 minutes. Which error it was trying to report I don't know. I check the "Reliability Monitor" and it shows no errors to be reported. I've disabled the windows error reporting service to see if the problem stops.

    Read the article

< Previous Page | 42 43 44 45 46 47 48 49 50 51 52 53  | Next Page >