Search Results

Search found 1450 results on 58 pages for 'exhaust fan'.

Page 46/58 | < Previous Page | 42 43 44 45 46 47 48 49 50 51 52 53  | Next Page >

  • iBook G4 has black screen on boot

    - by Jonathan Patt
    I have an old iBook G4 (A1054, 1.2 GHz) which has issues when it loses power or is shut off. If the battery drains—which happens quickly, as its remaining capacity is very low—it enters some sort of weird mode where it's not really awake (the screen is black, can't do anything) but it has no pulsing light indicating it's asleep either. The only way to exit this mode is to hold down the power button for ten seconds until it shuts off, and attempt rebooting it. Almost always, however, it makes the sound of the optical drive starting up, and then doesn't continue past that point. The screen doesn't come on, and things like resetting PRAM don't work. Occasionally a fan comes on loudly for a second or two. This sometimes seems to correspond with my pressing down on the rear-right casing, above the power jack. In the past, shutting it off, disconnecting it from power, removing the battery and waiting for 30 minutes would do the trick, but this time I have done that several times, letting it sit for up to several hours before retrying, to no avail. Any ideas?

    Read the article

  • Computer turns off unexpectedly

    - by Shahar
    My computer turns itself off unexpectedly after some time of use. It appears that this might be temperature related, but not for sure. I installed 2 tools that monitor temperature: SpeedFan and CPU Thermometer. The only definite finding is that there is a sensor (labelled temp1 in SpeedFan and CPU in CPU thermometer), which shows a temperature of 108C a second before the computer powers down. Until that moment, this sensor shows a constant temperature of 40C. I can usually reproduce the shutdown by viewing a few movies together, which cause another sensor (labelled CPU in SpeedFan) to go up to 60sC, but I do experience the problem even at times when this sensor remains low and cool. It does seem that the problem is more frequent if the computer is turned back on immediately after shutdown, but not always. I have had other hardware problems recently, which might be related: My hard disk heated up. I installed a fan on it, which worked to reduce the heat. The hard disk sensor shows around 40C. I had occasional blue screens and hard disk failures. Replacing the power supply seems to solve both these issues, but then this powerdown problem began appearing. I would appreciate any suggestions as to how to determine where the fault is, or what needs to be replaced.

    Read the article

  • SYS-5016T-MTFB will not POST without manual assistance (Motherboard: X8STi-F)

    - by Dan
    I have a Supermicro 5016T-MTFB 1U server which I am in the process of setting up, but it has a really strange problem. When the system is powered on it will not POST until I press the reset button a few times, followed by pressing the delete key on the keyboard to "wake it up". If I power it on and do nothing, the fans spin up but nothing else happens at all. After pressing the reset button once, the red "overheat" light comes on and blinks which is supposed to indicate a fan failure - but all the fans are working. Pressing reset again usually stops the blinking, and the system starts the normal POST routine but it will not actually get to the bios screen unless I press delete. If I don't press delete, it just continues to hang. After pressing delete it will take me into the bios setup screen, if I exit without saving changes I can boot the system normally. I was able to successfully install Linux with no trouble...but upon rebooting the same problem happened again. This board has integrated IPMI which I thought was the problem, so I disabled it via the jumper on the board. Did not help. Each time this system powers on, it goes on for a second, then turns off again for another second, then turns back on again. I don't know why it does that. Here is what I put in the system: 1 x Xeon E5630 (Nehalem) 80W TDP (it's not overheating, CPU temps stay under 40 degrees C) 2 x Kingston 2GB x 3 DDR3-1066 Memory ECC, unbuffered, unregistered (kvr1066d3e7sk3/6g) 1 x Intel X25-M 160 GB 2 x Western Digital RE3 1TB

    Read the article

  • Laptop GPU apparently blew up, motherboard doesn't even turn on its power LED. [But..]

    - by leladax
    EDIT: (Was: Laptop automatic shutdown after 2 seconds) If I take out the GPU, the motherboard LED turns on but then [if it attempts to power up and boot] it turns off after 2 seconds [fans turn on normally in that short period]. [Without the GPUs out there's not even an attempt to boot.] It's an SLI motherboard for a toshiba (model X200-219). If I take out one of the GPUs (they are on top of each other) it surprisingly lets the motherboard turn on too (as it is if both are out) but it still turns off after 2-3 seconds, same behavior. I wonder if it's the GPU that produces the 'turn off after being on' behavior and not something else. [Has anyone seen this behavior with blown up GPUs or could it be something else?] Previous question (before EDIT. Sorry, but someone thought it productive to lock the other one as duplicate): I'm trying to insvestigate which component produces this behavior. Other indications show it may be the GPU but I wonder if anyone knows more. It's a Toshiba Satellite X200 description: AC power shows the power being fed normally, when turned on the fan works and it appears to be starting up but after 2 seconds it shuts down with only the 'AC power connected" led on. -- seconds are about up to 4,maybe not 2 exactly.

    Read the article

  • POST Fail via AJAX Request?

    - by Jascha
    I can't for the life of me figure out why this is happening. This is kind of a repost (submitted to stackoverflow, but maybe a server issue?). I am running a javascript log out function called logOut() that has make a jQuery ajax call to a php script... function logOut(){ var data = new Object; data.log_out = true; $.ajax({ type: 'POST', url: 'http://www.mydomain.com/functions.php', data: data, success: function() { alert('done'); } }); } the php function it calls is here: if(isset($_POST['log_out'])){ $query = "INSERT INTO `token_manager` (`ip_address`) VALUES('logOutSuccess')"; $connection->runQuery($query); // <-- my own database class... // omitted code that clears session etc... die(); } Now, 18 hours out of the day this works, but for some reason, every once in a while, the POST data will not trigger my query. (this will last about an hour or so). I figured out the post data is not being set by adding this at the end of my script... $query = "INSERT INTO `token_manager` (`ip_address`) VALUES('POST FAIL')"; $connection->runQuery($query); So, now I know for certain my log out function is being skipped because in my database is the following data: if it were NOT being skipped, my data would show up like this: I know it is being skipped for two reasons, one the die() at the end of my first function, and two, if it were a success a "logOutSuccess" would be registered in the table. Any thoughts? One friend says it's a janky hosting company (hostgator.com). I personally like them because they are cheap and I'm a fan of cpanel. But, if that's the case??? Thanks in advance. -J

    Read the article

  • Laptop sleep: How to go into S3 easily?

    - by monov
    Laptop: Fujitsu-Siemens Amilo Pi-3525 OS: Vista When my laptop is plugged in and I close the lid, it goes into S1 sleep. This means that there is still: fan noise (annoying when trying to sleep at night) lots of power consumed (so if I then unplug the laptop and toss it in the bag, by the time I'm at school it's already drained and beeping ominously). What I want is S3 sleep, it solves both problems. I've found a roundabout way to go into S3 sleep: Unplug laptop Close lid (or click Sleep in Start menu) Plug laptop back in if needed The question: How do I force Windows to use always use S3 sleep when I close the lid? One thing I've tried is: dumppo admin minsleep=s3 (dumppo from here) Afterwards running just dumppo admin confirms that minsleep has been set, but closing the lid still goes into S1. Also, after a reboot, minsleep is reset to s1. I think dumppo is incompatible with Vista... MCE Standby Tool was recommended as a Vista-compatible alternative to dumppo, but it doesn't have any effect either. I looked in the BIOS settings, but there are no settings relating to ACPI sleeps/suspends there.

    Read the article

  • Where in the stack is Software Restriction Policies implemented?

    - by Knox
    I am a big fan of Software Restriction Policies for Microsoft Windows and was recently updating our settings for this. I became curious as to where Microsoft implemented this technology in the stack. I can imagine a very naive implementation being in Windows Explorer where when you double click on an exe or other blocked file type, that Explorer would check against the policy. I call this naive because obviously this wouldn't protect against someone typing something in a CMD window. Or worse, Adobe Reader running an external application. On the other hand, I can imagine that software restriction policies could be implemented deep in the stack almost at the metal. In this case, the low level loader would load into memory the questionable file, but mark the memory in the memory manager as non-executable data. I'm pretty sure that Microsoft did not do the most naive implementation, because if I block Java using a path block, Internet Explorer will crash if it attempts to load Java. Which is what I want. But I'm not sure how deep in the stack it's implemented and any insight would be appreciated.

    Read the article

  • PC won't boot after hanging during Windows 8 automatic repair [closed]

    - by Mun
    I've got a custom built PC using an ASUS P5E motherboard and Intel Q6600 CPU. I plugged in my mp3 player to the USB port yesteday, and when I came back to the machine after about an hour or so, the Windows 8 automatic repair message was on the screen. It seemed to stick there for an hour, after which I decided to just hit reset and try and figure out what was going on. However, the machine rebooted to a black screen before even getting to the BIOS, with the monitor lights just blinking indicating there was no signal. Tried powering down completely, waiting a few minutes and then powering back up again with no difference; black screen with monitor lights blinking. Tried leaving it on for a while and then pinging from another machine or accessing it via something like LogMeIn, but everything showed the machine as being offline. There were also no error beeps or anything like that. Also tried unplugging all of the memory and rebooting and that also caused no error beeps. Removed one of the display cards and left the other one in there, and still only a black screen. I'm inclined to think that the motherboard or CPU is fried, but there is no indication of damage on any components and the CPU fan seems to be working fine as it always has, so overheating seems unlikely. It's also plugged into a surge protector. The motherboard also has a green light which still lights up. As everything was still working fine before hitting the reset button during Windows 8 automatic repair screen, at which point everything stopped working, it seems unlikely that this problem is down to component failure. Has anyone else experienced anything like this or have any ideas on what could be causing this behavior?

    Read the article

  • Overheating Toshiba Satellite L300

    - by ldigas
    A coleague of mine's having trouble with his new Toshiba Satellite L300 ... I tool a kook at it, and indeed it's hot as hell. I couldn't hold my hand on it for too long. He says it also has a tendency to turn itself off (WinXP 32bit running) with no forewarning. Hasn't happened to me while I was using it, but that wasn't long anyways. The first guess was it was too dirty ... problem is it's new, came out of a package a quarter of a year ago. Kept in a clean environment (office). Looks clean. No dust in sight. Second guess is that the fan wasn't working properly, cause indeed it has intervals of working, and non working. But when I listen to it, it sounds like normal usage. I took a SpeedFan measurement, and it reports temp. up to 85 Celsius ... which is definitely too high. Anyone knows what else I could do to it ? It is under warranty and it will go to the service, but I thought if there is something we can do, as to avoid carrying it there / be without it for a week ...

    Read the article

  • VirtualBox problems writing to shared folders (Guest Additions installed)

    - by vincent
    I am trying to setup a shared folder from the host (ubuntu 10.10) to mount on a virtualized CentOS 5.5 with Guest Additions (4.0.0) installed (Guest addition features are working ie. seamless mode etc.). I am able to successfully mount the share with: mount -t vboxsf -o rw,exec,uid=48,gid=48 sf_html /var/www/html/ (uid and guid belong to the apache user/group) the only problem is that once mounted and I try to write/create directories and files I get the following: mkdir: cannot create directory `/var/www/html/test': Protocol error I am using the proprietary version of VirtualBox version 4.0.0 r69151. Has anyone had the same problem and been able to fix it or has any idea how to potentially fix this? Another question, the reason for setting this up is this. Our production servers are on CentOS 5.5 however I am a great fan of Ubuntu and would like to develop on Ubuntu rather than CentOS. However in order to stay as close to the production environment I would like to virtualize CentOS to use a web server and use the shared folder as web root. Anyone know whether this isn't a good idea? Has anyone successfully been able to set this up? Thanks guys, your help is always much appreciated and if you need any more information please let me know.

    Read the article

  • How to run the CPU at something like 75%?

    - by Tobias Kienzler
    My notebook is too old for me to invest into a new fan (it will simply be replaced by a new one when the final heat death occurs), but when it runs on full speed I feel like sitting in front of a vacuum cleaner with integrated cooking... I'm currently using NHC, the Max Battery mode of which let's the CPU run at 50% (~800 MHz). That's fine for most applications, and both temperature and noise remain low. However, on some occasions I need a bit more speed, more around 75% maybe. Can I set the power saving settings somehow so that the CPU won't surpass 75% of it's capability so that an acceptable compromise between power and noise is achieved? I can't set the CPU frequency in the BIOS and since on rare occasions I'd like to be able to switch to 100% without much hassling, hardware solutions like setting jumpers are no option. This answer to a similar (linux!) question mentions NHC should be able to offer these options, but for me they are all greyed out: The notebook is an Asus Z9200K, I guess NHC doesn't support its chipset enough for these advanced options.

    Read the article

  • Blinking power button

    - by Mike Ramsey
    A friend asked me to look at his Gateway DX4640 desktop. When he presses the power button, power goes to the mobo (NVIDIA nForce 630i MCP73PV, GeForce 7100 chipset) and the CPU fan starts spinning. The power button slowely blinks on and off (blue) and the screen briefly says no signal and then goes black. And nothing else; no post code beeps. My initial two conjectures were: 1. Vista was stuck in sleep/hibernation mode, or 2. A power off had left the mobo in a bad state. The fix for both is to: a) Unplug the AC power cord b) hold the power button for 30 second to fully discharge the mobo It didn't help. I left the system unplugged from AC power for an hour. No change. I am out of ideas. Has anybody seen anything like this before? What does a blinking blue power button mean? How can I get more data points to guide trouble shooting? --Thank you, --Mike

    Read the article

  • How to diagnose occasional sudden resets?

    - by steve314
    I have a Windows XP system, and have recently upgraded by adding 2 1GB sticks of RAM to the 2x0.5GB already present. Since then, about once per day (the system is used 8+ hours per day), the system has suddenly and unexpectedly reset. On a couple of occasions, the system has frozen completely, only responding to the power button being held in for several seconds to force power off. Nothing at all ever appears in the system event log that might indicate a possible cause - everything seems to suggest business as usual. Sounds like faulty memory - but memtest86+ says otherwise. A full test, taking over an hour, found no issues. The next likely suspicion, then, is that I've knocked something while installing the RAM. Trouble is, everything I can think of to test seems fine. I've opened up the case and prodded a few things around, hoping to get better contact on connections etc, but there's no sign yet as to whether that has made a difference or not. I thought about a malware-related timing fluke, but again, so far as I can tell I'm all clear. All I can think of to add to my checklist (mainly of things that I can't easily check) is... The power supply is (1) only 350W, (2) not necessarily the best quality, and (3) powering a Prescott P4 640 3.2GHz. Could that be borderline overloaded or about to die? How do I check? Is it possible that the CPU isn't getting cooled properly? I haven't had the fan past normal tickover even doing video encoding, and the only sane temperature reading from SpeedFan is pretty steady at 36 celcius, so probably not. Any thoughts? Is there a standard procedure for diagnosing this kind of fault?

    Read the article

  • Building a PC for Work and play? [closed]

    - by Derek Organ
    Ok, Its been a long time since I build my own PC so I'm looking to get back into it again and build a new one. First off budget is about €800 excluding the monitor and windows 7 licence and mouse. (just bought a new g500) I plan on using my computer for work, lots of applications open at once but none particularly excessive (photoshop being the most demanding, mostly coding tools) I also use it for some gaming, e.g. COD, Starcraft etc. One thing I do want to do eventually is get a really good monitor with hight resolution and maybe 27" so the graphics card needs to be able to make best use of that. So a few questions 1) Is the bottle neck in performance mostly still the harddrives? 2) Aren't most processors e.g. i5 etc even i3 so far a head of other bottlenecks it makes litte difference the higher you go. Isn't the Graphics card dealing with heavy graphics so what really slows because of a slow CPU? So from this my thinking is to get a SSD drive as my primary drive for OS etc and have loads of memory e.g. 6-8GB and a decent mid level graphics card? It doesn't seem at my level worth spending much on CPU and any other parts really. I basic parts off the top of my head Case, Motherboard CPU SSD Drive SATA Drive Power Supply Memory Cooling (fan?) Graphics Card Network Card Keyboard DVD drive Mouse Windows Monitor Am I missing anything? Any helpful tips or general education much appreciated. Thanks, Derek

    Read the article

  • Coffee spilled and went inside CPU...computer not starting

    - by Harpreet
    Today coffee got spilled over my table, and some of it (very less) reached the CPU placed under the table. I think little bit of it got inside the CPU through the front face of the CPU. As that happened the fan started running very fast and made noise. I tried to restart to see if it becomes fine, but the computer didn't start again. First it gave an error of "Alert! Air temperature sensor not detected" and didn't start. Next I tried again multiple times of starting the computer but then it gave some memory error. I was not able to start the computer. Incase there's a problem in hard disk or something related to memory, is there any way we can extract our work or data? I am scared if I am not able to extract my work in case some problem occurs like that. What options would I have? Help! EDIT: I have attached the photo here and you can see the area spilt in red circle. The hard drive electronics have been affected and internal speaker may also have been affected. Any advise on cleaning and if hard drive can work? EDIT 2: Are there any professional services offered to extract data from blemished hard disk, like this one, in case I am not able to run it personally?

    Read the article

  • SkyDrive broken after upgrade to Windows 8.1: "This location can't be found, please try later"

    - by avo
    Upgrading from Windows 8 to Windows 8.1 via the Store upgrade path has screwed my SkyDrive. The C:\Users\<user name>\SkyDrive folder is empty (it only has single file desktop.ini). When I open the native (Store) SkyDrive app, I see "This location can't be found, please try later". I'm glad to still have my files alive online in my SkyDrive account. I tried disconneting from / reconnecting to my Microsoft Account with no luck. Anyone has an idea on how to fix this without reinstalling/refreshing Windows 8.1? From Event Viewer: Faulting application name: skydrive.exe, version: 6.3.9600.16412, time stamp: 0x5243d370 Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000 Exception code: 0x00000000 Fault offset: 0x0000000000000000 Faulting process ID: 0x4e8 Faulting application start time: 0x01cece256589c7ee Faulting application path: C:\Windows\System32\skydrive.exe Faulting module path: unknown Report ID: {...} Faulting package full name: Faulting package-relative application ID: Also: The machine-default permission settings do not grant Local Activation permission for the COM Server application with CLSID {C2F03A33-21F5-47FA-B4BB-156362A2F239} and APPID {316CDED5-E4AE-4B15-9113-7055D84DCC97} to the user NT AUTHORITY\LOCAL SERVICE SID (S-1-5-19) from address LocalHost (Using LRPC) running in the application container Unavailable SID (Unavailable). This security permission can be modified using the Component Services administrative tool. Never was a big fan of in-place upgrade anyway, but this time it was a machine which I use for work, with a lot of stuff already installed on it. Shouldn't have tried to upgrade it in the first place, but was convinced Windows 8.1 is a solid update. Another lesson learnt.

    Read the article

  • Dell Studio 1555 not starting up

    - by Abhishek
    This is a 3-year-old laptop. I never had a big problem with it until now. I updated Kubuntu the night before yesterday. And Firefox got updated to version 18 and a few other related packages got updated. Then I shut down the laptop and restarted it, but it failed to start. I could hear the fan and the hard disk and the optical disk drive initialize. And the power button also lighted up. But there was no video - no POST or BIOS menu. I even opened the laptop up to the point when only the motherboard was the only thing attached to the base cover. I took it to the technician this evening. He checked it casually, and said that it might be a motherboard problem and will cost quite a bit to fix. Though he was not sure and said that he will give me a call after confirming the problem. Has anyone else had the same problem? What was it and what was the fix?

    Read the article

  • ipmi - can't ping or remotely connect

    - by Fidel
    I've tried configuring the IPMI controller to accept remote connections, but I can't even ping it. Here is it status: #/usr/local/bin/ipmitool lan print 2 Set in Progress : Set Complete Auth Type Support : NONE PASSWORD Auth Type Enable : Callback : : User : NONE PASSWORD : Operator : PASSWORD : Admin : PASSWORD : OEM : IP Address Source : Static Address IP Address : 192.168.1.112 Subnet Mask : 255.255.255.0 MAC Address : 00:a0:a5:67:45:25 IP Header : TTL=0x40 Flags=0x40 Precedence=0x00 TOS=0x10 BMC ARP Control : ARP Responses Enabled, Gratuitous ARP Enabled Gratituous ARP Intrvl : 8.0 seconds Default Gateway IP : 192.168.1.1 Default Gateway MAC : 00:00:00:00:00:00 802.1q VLAN ID : Disabled 802.1q VLAN Priority : 0 RMCP+ Cipher Suites : 0,1,2,3 Cipher Suite Priv Max : uaaaXXXXXXXXXXX : X=Cipher Suite Unused : c=CALLBACK : u=USER : o=OPERATOR : a=ADMIN : O=OEM # /usr/local/bin/ipmitool user list 2 ID Name Enabled Callin Link Auth IPMI Msg Channel Priv Limit 1 true false true true USER 2 admin true false true true ADMINISTRATOR # /usr/local/bin/ipmitool channel getaccess 2 2 Maximum User IDs : 5 Enabled User IDs : 2 User ID : 2 User Name : admin Fixed Name : No Access Available : callback Link Authentication : enabled IPMI Messaging : enabled Privilege Level : ADMINISTRATOR # /usr/local/bin/ipmitool channel info 2 Channel 0x2 info: Channel Medium Type : 802.3 LAN Channel Protocol Type : IPMB-1.0 Session Support : multi-session Active Session Count : 0 Protocol Vendor ID : 7154 Volatile(active) Settings Alerting : disabled Per-message Auth : disabled User Level Auth : disabled Access Mode : always available Non-Volatile Settings Alerting : disabled Per-message Auth : disabled User Level Auth : disabled Access Mode : always available # /usr/local/bin/ipmitool chassis status System Power : on Power Overload : false Power Interlock : inactive Main Power Fault : false Power Control Fault : false Power Restore Policy : unknown Last Power Event : Chassis Intrusion : inactive Front-Panel Lockout : inactive Drive Fault : false Cooling/Fan Fault : false # arp Address HWtype HWaddress Flags Mask Iface 192.168.1.112 ether 00:A0:A5:67:45:25 C bond0 # /usr/local/bin/ipmitool -I lan -H 192.168.1.112 -U admin -P admin chassis power status Error: Unable to establish LAN session Unable to get Chassis Power Status In summary. It exists on the ARP list so arp's are being broadcast. I can't ping it and can't connect to it. Can anyone spot any glaring mistakes in the configuration? Many thanks, Fidel

    Read the article

  • What parts of a motherboard age, and how can I choose one with the longest possible life?

    - by Robert Harvey
    I have a home-built computer that's probably about four years old. I realize this probably seems ancient to some folks, but computers have no moving parts (except the fans), so theoretically they should last a long time, if I still have software to run on them. A few weeks ago, it began blue-screening and freezing up, with various error messages. It almost always happened about five minutes after startup. I assumed that the video card was overheating, since the cheap little fan on the heatsink died, so I replaced it. Long story short, after upgrading the video drivers a couple of times and performing some other troubleshooting, I remembered that the last time this happened, I took out the memory SIMS and cleaned the contacts with a gum eraser, so I did that again (noting that the SATA cables were very close to the chips on the SIMS). I re-routed the cables and reinstalled the SIMS. So far, so good; the machine has been trouble-free since. But blue-screens are distressing; I never know what bits are being chewed up in my OS installation when something like this happens. So I'm wondering if I'm choosing my components properly. If it matters, it's an Intel D915GAG motherboard and Corsair memory, but what I'm wondering is, should I be looking for certain characteristics when I choose these parts for my next computer, so that I can avoid this problem in my next build?

    Read the article

  • PC freezes after repeated clicking noises

    - by Péter Török
    I have an oldish PC (Athlon XP 2200, WinXP). Every time I switch it on, I hear a loud "click" first of all, and when it is shut down, again a click is the last sound I hear. Lately it started to behave erratically: it started to click loudly in the middle of a session. First only once in a while, then repeatedly for several seconds in a row, and finally it froze completely. We were not doing anything particular during these times, usually just browsing the web. This has already happened twice in a few week's time period. We typically use it only in the evenings, so when the freeze happened, I just decided it is time for the bed. When it was started up the next day, everything looked fine. Any hints on what could be the culprit? Could it be caused by an ageing heat fan, or dust that has accumulated inside the case? We are backing up all the data stored on it, and then will open the case to look inside, but I thought it would be good to get some background info first of all.

    Read the article

  • Coffee spilled inside computer, damaged hard drive

    - by Harpreet
    Today coffee spilled over my table, and some of it (very less) reached the PC case placed under the table. I think little bit of it got inside the PC case through the front. As that happened the fan started running very fast and made noise. I tried to restart to see if it becomes fine, but the computer didn't start again. First it gave an error of "Alert! Air temperature sensor not detected" and didn't start. Next I tried again multiple times of starting the computer but then it gave some memory error. I was not able to start the computer. Incase there's a problem in hard disk or something related to memory, is there any way we can extract our work or data? I am scared if I am not able to extract my work in case some problem occurs like that. What options would I have? Help!! EDIT: I have attached the photo here and you can see the area spilt in red circle. The hard drive electronics have been affected and internal speaker may also have been affected. Any advise on cleaning and if hard drive can work? EDIT 2: Are there any professional services offered to extract data from blemished hard disk, like this one, in case I am not able to run it personally?

    Read the article

  • Dell Dimension 8400 Startup error

    - by Michael
    Hello all, thanks first for taking the time to read this and possibly help me...... now I am pretty decent of a computer tech...but not enough. I am having an issue with my computer which is running windows xp and as I mentioned it is a dell Dimension 8400. as soon as I power the system up the fan goes into hyper drive (spins like crazy and is very loud) then the start up screen with dell comes up and the loading bar gets stuck on the process of "Bios Revision A00" and never loads beyound that. I have read alot about it and think that the main problem was that it can not locate the file (which does have an updated version) I think it is A09. I can not enter safe mode, Bios mode or anything. I do have the file on my other computer and I was wondering if there is a way that I can use a usb flash drive (as I have read on other sites) to create a bootable MS-Dos diskette but I am failing at creating as such....is this possible? or is there anything else I can do? I tried to remove the battery from the system for about 10 minutes while it was completely unplug and tried then to reboot it and go into the bios menu but the same thing keeps happening....can anyone help me :-(

    Read the article

  • What laptop would be recommended for video-editing or transcoding to blu-ray?

    - by Rob
    I'm looking for a machine (has to be a laptop) reasonably fast enough to handle editing/transcoding/rendering to Blu-ray disc of full true HD 1080p (1920x1080) video from a Samsung R10 camcorder - MPEG4 25fps (not the Sony-Panasonic AVCHD format): To be able to browse through the footage (say, quarter screen is fine for monitoring) and do simple edits - cut out bad bits, add titles, fades, nothing too fancy To be able to burn the footage in 1920x1080p 24p (twenty-four) fps to blu-ray, probably don't mind if I have to leave it for a few hours, or even overnight, as long as its not still running in the morning or takes days. I ALREADY have an external USB 2.0 LG BE06LU10 blu-ray burner. Does quad core make much difference? Or would Dual-core suffice for the above? NVidia because of CUDA for increased speed. What software today can take advantage of this? Which graphics card do I need? So far I've found Dell/Alienware to be well-specified, having a 5yr old Dell laptop that still runs well, albeit slow by today's standards, gives me a good impression. My concerns are too much fan-noise and budget and some Dell Precision Laptops exceed 1500 pounds. Thoughts?

    Read the article

  • Cheap Solution for Routing a Toll Free Number to a Standard POTS Number

    - by VxJasonxV
    I do some technical work for an Internet Radio Show/Podcast, and need to fix something that has been broken for a while. The hosts have a Skype-In number to take listener calls, and for convenience sake, I bought and paid for a toll free number for a period of time. I used to use Asterlink for routing calls, but they folded and sent my number to OneBox, but they're ridiculously expensive by comparison. I'm looking for a cheap solution for this one simple task. Forward toll free calls to a skype-in number. The definition of cheap is as cheap or cheaper than Asterlink was. I paid something like $2 a month, and then the termination/call rate, which was a fraction of a sent for termination, and only whole cents after some serious time on the call. A $20 preload lasted me months at a time. I don't want to be upsold too, I want a simple web based management screen (CDR/stats are fun!), and obviously, it needs to be reliable. What vendors out there are you a fan of that solves this need?

    Read the article

  • LG LW20 Express won't boot after hdd replace

    - by Mika
    My old laptop (LG LW20 Express) got a hdd failure and I replaced the hdd. Now the laptop won't boot from cd or usb. I'm trying to install ubuntu on it. When I turn the laptop on it shows me the startup screen but when it should be the time to load operating system it just gives a black screen and starts over. This loop continues until I shut down the laptop. I created the usb boot drive following this guide https://help.ubuntu.com/community/Installation/FromUSBStick/ I used my boot cd to install ubuntu on this machine I'm using right now. So at least the cd should work. From the BIOS I can see that my newly installed hdd is recognized and put as a secondary master. Also the cd and removable media are in the boot list before hdd. The laptop runs pretty hot. The fan is at full speed pretty soon after the laptop is turned on. Earlier I suspected that it would have been the almost broken hdd that would have produced that heat but there obviously is something else also. Any ideas what to check?

    Read the article

< Previous Page | 42 43 44 45 46 47 48 49 50 51 52 53  | Next Page >