Search Results

Search found 1491 results on 60 pages for 'inputs'.

Page 46/60 | < Previous Page | 42 43 44 45 46 47 48 49 50 51 52 53  | Next Page >

• What's a good way of building up a String where you specific start and end locations?

  - by Michael Campbell

  (java 1.5) I have a need to build up a String, in pieces. I'm given a set of (sub)strings, each with a start and end point of where they belong in the final string. Was wondering if there were some canonical way of doing this. This isn't homework, and I can use any licensable OSS, such as jakarta commons-lang StringUtils etc. My company has a solution using a CharBuffer, and I'm content to leave it as is (and add some unit tests, of which there are none (?!)) but the code is fairly hideous and I would like something easier to read. As I said this isn't homework, and I don't need a complete solution, just some pointers to libraries or java classes that might give me some insight. The String.Format didn't seem QUITE right... I would have to honor inputs too long and too short, etc. Substrings would be overlaid in the order they appear (in case of overlap). As an example of input, I might have something like: String:start:end FO:0:3 (string shorter than field) BAR:4:5 (String larger than field) BLEH:5:9 (String overlays previous field) I'd want to end up with FO BBLEH 01234567890

  Read the article

• What's a good way of building up a String given specific start and end locations?

  - by Michael Campbell

  (java 1.5) I have a need to build up a String, in pieces. I'm given a set of (sub)strings, each with a start and end point of where they belong in the final string. Was wondering if there were some canonical way of doing this. This isn't homework, and I can use any licensable OSS, such as jakarta commons-lang StringUtils etc. My company has a solution using a CharBuffer, and I'm content to leave it as is (and add some unit tests, of which there are none (?!)) but the code is fairly hideous and I would like something easier to read. As I said this isn't homework, and I don't need a complete solution, just some pointers to libraries or java classes that might give me some insight. The String.Format didn't seem QUITE right... I would have to honor inputs too long and too short, etc. Substrings would be overlaid in the order they appear (in case of overlap). As an example of input, I might have something like: String:start:end FO:0:3 (string shorter than field) BAR:4:5 (String larger than field) BLEH:5:9 (String overlays previous field) I'd want to end up with FO BBLEH 01234567890

  Read the article

• Finding intersection of two spheres

  - by Onkar Deshpande

  Hi, Consider the following problem - I am given 2 links of length L0 and L1. P0 is the point that the first link starts at and P1 is the point that I want the end of second link to be at in 3-D space. I am supposed to write a function that should take in these 3-D points (P0 and P1) as inputs and should find all configurations of the links that put the second link's end point at P1. My understanding of how to go about it is - Each link L0 and L1 will create a sphere S0 and S1 around itself. I should find out the intersection of those two spheres (which will be a circle) and print all points that are on the circumference of that circle. I saw gmatt's first reply on the http://stackoverflow.com/questions/1406375/finding-intersection-points-between-3-spheres but could not understand it properly since the images did not show up. I also saw a formula for finding out the intersection at mathworld[dot]wolfram[dot]com/Sphere-SphereIntersection[dot]html . I could find the radius of intersection by the method given on mathworld. Also I can find the center of that circle and then use the parametric equation of circle to find the points. The only doubt that I have is will this method work for the points P0 and P1 mentioned above ? Please comment and let me know your thoughts.

  Read the article

• JConsole does not connect when a program is waiting for a console input

  - by Calm Storm

  Hi, I have a problem similar to the one mentioned here. I have a program which launches a selenium browser and refreshes it every 2 seconds. My idea here was to monitor the memory usage of my application as the page is being hit. This console program does a "System.in.read" and when a user presses enter key, this stops the browser refresh thread. I run the program and it runs as I would expect it to. But when I fire jconsole and attach it to the process, it looks like jconsole waits forever to attach. This is because of the "System.in.read", apparently as shown in the JConsole source. In my code it makes perfect sense for me to terminte the browser when user presses something so is there any alternative available at all ? (Posted code sample below) package com.ekanathk; import java.util.ArrayList; import java.util.List; import org.junit.Test; public class MultiThread { @Test public void testSimple() throws Exception { List<Integer> x = new ArrayList<Integer>(); for(int i = 0; i < 1000; i++) { x.add(i); } System.out.print("Press Enter to stop (try attach a jconsole now...."); System.in.read(); } } The problem here seems to be that any System.in.read (either in Main thread or any threads) seems to completely block jconsole. I guess the problem essentially boils down to multiple threads requesting system inputs at the same time? Is there a solution ?

  Read the article

• Rails fields_for parameters for a has_many relation don't yield an Array in params

  - by user1289061

  I have a model Sensor with has_many and accepts_nested_attributes_for relationships to another model Watch. In a form to update a Sensor, I have something like the following <%= sensor_form.fields_for :watches do |watches_form| %> <%= watches_form.label :label %><br /> <%= watches_form.text_field :label %> <% end %> This is indended to allow editting of the already-created Watches belonging to a Sensor. This call spits form inputs as so: <input name="sensor[watches_attributes][0][label]" ... /> <input name="sensor[watches_attributes][0][id]" ... /> When this gets submitted, the params object in the Sensor controller gets an assoc like "sensor" => { "id"=>"1", "watches_attributes"=> { "0"=>{"id" => "1", "label" => "foo"}, "1"=>{"id" => "2", "label" => "bar"} } } For a has_many, accepts_nested_attributes_for update to work upon the @sensor.update_attributes call, it seems that that attributes key really must map to an Array. From what I've seen in the examples, the combination of has_many, accepts_nested_attributes_for, and sensor_form.fields_for should allow me to pass the resulting params object directly to @sensor.update_attributes and update each related object as intended. Instead the Sensor takes place, with no errors, but the Watch objects are not updated (since "watches_attributes" maps to a Hash instead of an Array?) Have I missed something?

  Read the article

• Triangle numbers problem....show within 4 seconds

  - by Daredevil

  The sequence of triangle numbers is generated by adding the natural numbers. So the 7th triangle number would be 1 + 2 + 3 + 4 + 5 + 6 + 7 = 28. The first ten terms would be: 1, 3, 6, 10, 15, 21, 28, 36, 45, 55, ... Let us list the factors of the first seven triangle numbers: 1: 1 3: 1,3 6: 1,2,3,6 10: 1,2,5,10 15: 1,3,5,15 21: 1,3,7,21 28: 1,2,4,7,14,28 We can see that 28 is the first triangle number to have over five divisors. Given an integer n, display the first triangle number having at least n divisors. Sample Input: 5 Output 28 Input Constraints: 1<=n<=320 I was obviously able to do this question, but I used a naive algorithm: Get n. Find triangle numbers and check their number of factors using the mod operator. But the challenge was to show the output within 4 seconds of input. On high inputs like 190 and above it took almost 15-16 seconds. Then I tried to put the triangle numbers and their number of factors in a 2d array first and then get the input from the user and search the array. But somehow I couldn't do it: I got a lot of processor faults. Please try doing it with this method and paste the code. Or if there are any better ways, please tell me.

  Read the article

• JavaScript: input validation in the keydown event

  - by c411

  Hi, I'm attempting to do info validation against user text input in the process of keydown event. The reason that I am trying to validate in the keydown event is because I do not want to display the characters those that are considered to be illegal in the input box at the beginning. The validation I am writing is like this, function validateUserInput(){ var code = this.event.keyCode; if ((code<48||code>57) // numerical &&code!==46 //delete &&code!==8 //back space &&code!==37 // <- arrow &&code!==39) // -> arrow { this.event.preventDefault(); } } I can keep going like this, however I am seeing drawbacks on this implmentation. Those are, for example, Conditional statement become longer and longer when I put more conditions to be examined. keyCodes can be different by browsers. I have to not only check what is not legal but also have to check what are exceptionals. In above examples, delete,backspace, and arrow keys are exceptionals. But the feature that I don't want to lose is having not to display the input in the textarea unless it passes the validation. (In case the user try to put illegal characters in the textarea, nothing should appear at all) That is why I am not doing validation upon keyup event. So my question is, Are there better ways to validate input in keydown event than checking keyCode by keyCode? Are there other ways to capture the user inputs other than keydown event before browser displays it? And a way to put the validation on it? Thanks for the help in advance.

  Read the article

• Jquery get each div's sub child divs and grab info into an array

  - by McNabbToSkins

  I have a some html that looks like this <div id="main"> <div id="sub_main_1" class="sub_main"> <input type="text" class="sub_name_first" /><br /> <input type="text" class="sub_name_second" /><br /> </div> <div id="sub_main_2" class="sub_main"> <input type="text" class="sub_name_first" /><br /> <input type="text" class="sub_name_second" /><br /> </div> </div> I would like to pull out each sub_main divs information into an array in javascript. So far I have this as my jquery code $('#main').find('.sub_main').each( function() { alert('hi'); }); The alert is just a test that it should show "hi" twice. But this is not working. I am also not clear on how I can store the two inputs in a javascript array. Any help would be great! Thanks,

  Read the article

• Syncing data between devel/live databases in Django

  - by T. Stone

  With Django's new multi-db functionality in the development version, I've been trying to work on creating a management command that let's me synchronize the data from the live site down to a developer machine for extended testing. (Having actual data, particularly user-entered data, allows me to test a broader range of inputs.) Right now I've got a "mostly" working command. It can sync "simple" model data but the problem I'm having is that it ignores ManyToMany fields which I don't see any reason for it do so. Anyone have any ideas of either how to fix that or a better want to handle this? Should I be exporting that first query to a fixture first and then re-importing it? from django.core.management.base import LabelCommand from django.db.utils import IntegrityError from django.db import models from django.conf import settings LIVE_DATABASE_KEY = 'live' class Command(LabelCommand): help = ("Synchronizes the data between the local machine and the live server") args = "APP_NAME" label = 'application name' requires_model_validation = False can_import_settings = True def handle_label(self, label, **options): # Make sure we're running the command on a developer machine and that we've got the right settings db_settings = getattr(settings, 'DATABASES', {}) if not LIVE_DATABASE_KEY in db_settings: print 'Could not find "%s" in database settings.' % LIVE_DATABASE_KEY return if db_settings.get('default') == db_settings.get(LIVE_DATABASE_KEY): print 'Data cannot synchronize with self. This command must be run on a non-production server.' return # Fetch all models for the given app try: app = models.get_app(label) app_models = models.get_models(app) except: print "The app '%s' could not be found or models could not be loaded for it." % label for model in app_models: print 'Syncing %s.%s ...' % (model._meta.app_label, model._meta.object_name) # Query each model from the live site qs = model.objects.all().using(LIVE_DATABASE_KEY) # ...and save it to the local database for record in qs: try: record.save(using='default') except IntegrityError: # Skip as the record probably already exists pass

  Read the article

• Can Haskell's Parsec library be used to implement a recursive descent parser with backup?

  - by Thor Thurn

  I've been considering using Haskell's Parsec parsing library to parse a subset of Java as a recursive descent parser as an alternative to more traditional parser-generator solutions like Happy. Parsec seems very easy to use, and parse speed is definitely not a factor for me. I'm wondering, though, if it's possible to implement "backup" with Parsec, a technique which finds the correct production to use by trying each one in turn. For a simple example, consider the very start of the JLS Java grammar: Literal: IntegerLiteral FloatingPointLiteral I'd like a way to not have to figure out how I should order these two rules to get the parse to succeed. As it stands, a naive implementation like this: literal = do { x <- try (do { v <- integer; return (IntLiteral v)}) <|> (do { v <- float; return (FPLiteral v)}); return(Literal x) } Will not work... inputs like "15.2" will cause the integer parser to succeed first, and then the whole thing will choke on the "." symbol. In this case, of course, it's obvious that you can solve the problem by re-ordering the two productions. In the general case, though, finding things like this is going to be a nightmare, and it's very likely that I'll miss some cases. Ideally, I'd like a way to have Parsec figure out stuff like this for me. Is this possible, or am I simply trying to do too much with the library? The Parsec documentation claims that it can "parse context-sensitive, infinite look-ahead grammars", so it seems like something like I should be able to do something here.

  Read the article

• jQuery Validate plugin - password check - minimum requirements - Regex

  - by QviXx

  I've got a little problem with my password-checker. There's got a registration form with some fields. I use jQuery Validate plugin to validate user-inputs. It all works except the password-validation: The password should meet some minimum requirements: minimum length: 8 - I just use 'minlength: 8' at least one lower-case character at least one digit Allowed Characters: A-Z a-z 0-9 @ * _ - . ! At the moment I use this code to validate the password: $.validator.addMethod("pwcheck", function(value, element) { return /^[A-Za-z0-9\d=!\-@._*]+$/.test(value); }); This Code works for the allowed characters but not for minimum requirements. I know that you can use for example (?=.*[a-z]) for a lower-case-requirement. But I just don't get it to work. If I add (?=.*[a-z]) the whole code doesn't work anymore. I need to know how to properly add the code to the existing one. Thank you for your answers! This is the complete code <script> $(function() { $("#regform").validate({ rules: { forename: { required: true }, surname: { required: true }, username: { required: true }, password: { required: true, pwcheck: true, minlength: 8 }, password2: { required: true, equalTo: "#password" }, mail1: { required: true, email: true }, mail2: { required: true, equalTo: "#mail1" } }, messages: { forename: { required: "Vornamen angeben" }, surname: { required: "Nachnamen angeben" }, username: { required: "Usernamen angeben" }, password: { required: "Passwort angeben", pwcheck: "Das Passwort entspricht nicht den Kriterien!", minlength: "Das Passwort entspricht nicht den Kriterien!" }, password2: { required: "Passwort wiederholen", equalTo: "Die Passwörter stimmen nicht überein" }, mail1: { required: "Mail-Adresse angeben", email: "ungültiges Mail-Format" }, mail2: { required: "Mail-Adresse wiederholen", equalTo: "Die Mail-Adressen stimmen nicht überein" } } }); $.validator.addMethod("pwcheck", function(value, element) { return /^[A-Za-z0-9\d=!\-@._*]+$/.test(value); }); }); </script>

  Read the article

• Masspay and MySql

  - by Mike

  Hi, I am testing Paypal's masspay using their 'MassPay NVP example' and I having difficulty trying to amend the code so inputs data from my MySql database. Basically I have user table in MySql which contains email address, status of payment (paid,unpaid) and balance. CREATE TABLE `users` ( `user_id` int(10) unsigned NOT NULL auto_increment, `email` varchar(100) collate latin1_general_ci NOT NULL, `status` enum('unpaid','paid') collate latin1_general_ci NOT NULL default 'unpaid', `balance` int(10) NOT NULL default '0', PRIMARY KEY (`user_id`) ) ENGINE=MyISAM AUTO_INCREMENT=6 DEFAULT CHARSET=latin1 COLLATE=latin1_general_ci Data : 1 [email protected] paid 100 2 [email protected] unpaid 11 3 [email protected] unpaid 20 4 [email protected] unpaid 1 5 [email protected] unpaid 20 6 [email protected] unpaid 15 I then have created a query which selects users with an unpaid balance of $10 and above : $conn = db_connect(); $query=$conn->query("SELECT * from users WHERE balance >='10' AND status = ('unpaid')"); What I would like to is for each record returned from the query for it to populate the code below: Now the code which I believe I need to amend is as follows: for($i = 0; $i < 3; $i++) { $receiverData = array( 'receiverEmail' => "[email protected]", 'amount' => "example_amount",); $receiversArray[$i] = $receiverData; } However I just can't get it to work, I have tried using mysqli_fetch_array and then replaced "[email protected]" with $row['email'] and "example_amount" with row['balance'] in various methods of coding but it doesn't work. Also I need it to loop to however many rows that were retrieved from the query as <3 in the for loop above. So the end result I am looking for is for the $nvpStr string to pass with something like this: $nvpStr = "&EMAILSUBJECT=test&RECEIVERTYPE=EmailAddress&CURRENCYCODE=USD&[email protected]&L_Amt=11&[email protected]&L_Amt=11&[email protected]&L_Amt=20&[email protected]&L_Amt=20&[email protected]&L_Amt=15"; Thanks

  Read the article

• Problem when reading input in C

  - by gcx

  I've made a Linked List. Its elements keep both previous and next items' address. It gets commands from an input file. It detects the command and uses the following statement as a parameter. (text: add_to_front john - means: add_to_front(john)) Code: http://pastebin.com/KcAm1y3L When I try to give the commands from an input file it gives me same output over and over. However, if I write inputs in main() manually, it works. For ex input file: add_to_front john add_to_back jane add_to_back jane print (unfortunately) the output is: >add_to_front john >add_to_back jane >add_to_back jane >print jane jane jane Although, if I write add_to_front(john); add_to_back(jane); add_to_back(jane); print(); instead of this command check: while (scanf("%s",command)!=EOF) { if (strcmp(command,"add_to_front")==0) { gets(parameter); add_to_front(parameter); } else if (strcmp(command,"add_to_back")==0) { gets(parameter); add_to_back(parameter); } else if (strcmp(command,"remove_from_back")==0) remove_from_back(parameter); ... printf(" HUH?\n"); } } in main() it gives the correct output. I know it's a lot to ask but this thing is bothering me for 2 days. What do you think i'm doing wrong?

  Read the article

• Dealing with Imprecise Drawing in CAD Drawing

  - by Graviton

  I have a CAD application, that allows user to draw lines and polygons and all that. One thorny problem that I face is user drawing can be highly imprecise, for example, a user might want to draw two rectangles that are connected to each other. Hence there should be one line shared by two rectangles. However, it's easy for user to, instead of draw a line, draw two lines that are very close to each other, so close to each other that when look from the screen, you would be mistaken that they are the same line, except that they aren't when you zoom in a little bit. My application would require user to properly draw the lines ( or my preprocessing must be able to do auto correction), or else my internal algorithm would not be able to process the inputs correctly. What is the best strategy to combat this kind of problem? I am thinking about rounding the point coordinates to a certain degree of precision, but although I can't exactly pinpoint the problem of this approach, but I feel that this is not the correct way of doing things, that this will introduce a new set of problem. Any idea?

  Read the article

• TextBox should display text in hexadecimal in a specific format

  - by Owais Wani

  I have a textbox in my xaml file which is editable. Now according to my project requirements content in textbox should only be 0-9 and a-f (hexadecimal values) and textbox should take the input based on hexadecimal values. Demonstratation: 12 ab 32 a5 64 Now if my cursor is at the end and i go on pressing backspace, it shud remove the values as it happens in a general text box. Now If my cursor is at the beginning of a5, and i press "delete key", the value should become like: 12 ab 32 56 4 If my cursor is at the end of a5 and i press the 'delete key" nothing should happen. I had done this successful in my C++ application as follows: void CMSP430CommPanel::textEditorTextChanged (TextEditor& editor) { if(&editor == m_texti2cWrite) { int count = 0; int location; String text1 = m_texti2cWrite->getText(); String text = m_texti2cWrite->getText().removeCharacters(" "); String hexString = String::empty; int countCaret = m_texti2cWrite->getCaretPosition(); for(int i=0; i < text.length(); i++) { hexString = hexString + String (&text[i], 1); if((i+1) % 2 == 0) { if(i != text.length()-1) { hexString = hexString + T(" "); count ++; } } count ++; } m_texti2cWrite->setText(hexString,false); if(text1.length() == m_texti2cWrite->getCaretPosition()) { m_texti2cWrite->setCaretPosition(count); } else { m_texti2cWrite->setCaretPosition(countCaret); } } } where m_texti2cWrite is the name given to textbox. How can i implement the same case in my wpf application which is MVVM based. I have a textbox which shud take inputs as I said above. please help!!!

  Read the article

• Routing is using ID has action and action has ID after submitting a form

  - by Victor Martins

  I have a model User that has_one user_profile and a User_Profile belongs_to user in the User controller I have: def personal @user = User.find_by_id(params[:id]) @user_profile = @user.user_profile @user_profile ||= @user.build_user_profile end def update_personal @user = User.find_by_id(params[:id]) if @user.user_profile.update_attributes(params[:user_profile]) flash[:notice] = "OK" redirect_to @user else flash[:notice] = "Fail" render :action => 'update_personal' end end In my personal.html.erb view I have: <% semantic_form_for @user_profile, :url => { :action => "update_personal"} do |form| %> <%= form.inputs %> <%= form.buttons %> <%end%> And on the rountes I have: map.resources :users, :member => { :personal => :get, :update_personal => :put } Now the strange thing is that I can do: users/1/personal to see the form but when I submit I get this error: Unknown action No action responded to 1. It's trying to find an action with the name 1. Can anyone point me out on the right direction?

  Read the article

• Uploading XML with NSInputStream Iphone....

  - by Aks

  Hi, I have to upload XML string to server & the Web service expect it in body stream part of the http request. So i am allocating the NSInputstream instance with xml data & then setting it the part of the http string but it uploading the stream body NULL & in my code if check the Stream status, it gives error & size null, Could you let me know how to get it done , also pasting the code. Code: NSInputStream* stream = [[[NSInputStream alloc]initWithData:streamData]retain]; request=[NSMutableURLRequest requestWithURL:[NSURL URLWithString:nss_url]]; NSString *msgLength = [NSString stringWithFormat:@"%d", [message length]]; [request addValue: @"text/xml; charset=utf-8" forHTTPHeaderField:@"Content-Type"]; [request addValue: @"http://www.XYZ.COM/ACL" forHTTPHeaderField:@"SOAPAction"]; [request addValue: msgLength forHTTPHeaderField:@"Content-Length"]; [request setHTTPBodyStream:[NSInputStream inputStreamWithData:streamData]]; [request setHTTPMethod:@"POST"]; NSLog(@"The input stream is %@ & error is %@",[stream streamStatus],[stream streamError]); Its gives: The input stream is (null) & error is Error Domain=NSUnknownErrorDomain Code=0 "Operation could not be completed. (NSUnknownErrorDomain error 0.)" Any inputs what I am missing ..........

  Read the article

• Accessing the stringValue from NSTextFields on different NIBs

  - by Kyle Zaragoza

  I'm having an extremely difficult time trying to access information from an object (e.g. an NSTextField) that is located on a NIB other than my "MainMenu.nib". My current setup: I have a MainMenu.xib that contains only a toolbar at the top and an NSView. I have four other .xib files containing custom NSViews and each of their File Owner's are assigned to a NSViewController subclass which I have created for each. My MainMenu.xib contains an object that is set to my WindowController subclass that takes care of swapping the fours views into the NSView on my MainMenu.xib. All of this works fantastic. Where I have a problem: I have another class that acts as the brains to my application which sends and receives data from an online server, all of the methods I have created rely on inputs from the user that are located on the individual .xibs that swap into my MainMenu.xib's NSview. Unfortunately I have no idea on how to grab the information from the NSTextFields, textViews, etc. that are located on my individual .xib files. What I've tried: I have tried setting the File Owner's of the four individual .xibs to my "brains" class and connecting outlets defined in my "brains".h, but when I call [textField stringValue] I receive a NULL response. I'm thinking this is because I'm creating multiple instances of my "brains" class but not totally sure. Any help on accessing information from textFields from other nibs would be a great benefit, thanks in advance.

  Read the article

• Jekyll - How to approach asset processing (minification, spriting...)

  - by Gromix

  I recently switched to Jekyll and I find the conversion pipeline works really well. However I'm stuck on which approach to take when the process is many inputs to one output (ex: concatenating CSS files, creating image sprites...) I know several tools that can do it, that can be called either from the command line or in Ruby code directly. For ex: Jammit css sprites Compass sprites My current solution is a few Jekyll plugins that call these tools. However, it has the following problems: 1. SASS files should be processed, then concatenated/minified SASS-CSS is a Converter, and the concatenation is a Generator run on the output. Unfortunately generators are run first, which means the concatenation is always a step behind (I have to run the build twice) 2. Jekyll does not know about the source/output relationship With converters, when I run Jekyll in server mode, if I change a SASS file it automatically runs the conversion to CSS. When dealing with concatenation/spriting, I haven't found a way to do the same. I end up having to run a "normal" Jekyll build (not server auto) to update the concatenated files and sprites. Thanks for any ideas!

  Read the article

• CSS renders Input in firefox mac vs firefox PC. can i detect os via javascript? or maybe a CSS hack

  - by adardesign

  I have a input[type="text"] the that has padding applied to it behaves differently in firefox PC then on a mac. Any hacks that can target firefox PC? These styles are what its seen on firefox PC firebug .searchContainer input { border-color:#7C7C7C #C3C3C3 #DDDDDD; border-style:solid; border-width:1px; color:#555555; float:left; height:12px; padding:3px; } These styles are what its seen on firefox PC firebug .searchContainer input { border-color:#7C7C7C #C3C3C3 #DDDDDD; border-style:solid; border-width:1px; color:#555555; float:left; height:12px; padding:3px; } No other styles are applied to these inputs. Here is a snapshot of FF PC http://tinyurl.com/2wdxmq5 Here is a snapshot of FF mac http://tinyurl.com/2u7f2nl any suggestions?

  Read the article

• Using pam_python in a script running with mod_python

  - by markys

  Hi ! I would like to develop a web interface to allow users of a Linux system to do certain tasks related to their account. I decided to write the backend of the site using Python and mod_python on Apache. To authenticate the users, I thought I could use python_pam to query the PAM service. I adapted the example bundled with the module and got this: # out is the output stream used to print debug def auth(username, password, out): def pam_conv(aut, query_list, user_data): out.write("Query list: " + str(query_list) + "\n") # List to store the responses to the different queries resp = [] for item in query_list: query, qtype = item # If PAM asks for an input, give the password if qtype == PAM.PAM_PROMPT_ECHO_ON or qtype == PAM.PAM_PROMPT_ECHO_OFF: resp.append((str(password), 0)) elif qtype == PAM.PAM_PROMPT_ERROR_MSG or qtype == PAM.PAM_PROMPT_TEXT_INFO: resp.append(('', 0)) out.write("Our response: " + str(resp) + "\n") return resp # If username of password is undefined, fail if username is None or password is None: return False service = 'login' pam_ = PAM.pam() pam_.start(service) # Set the username pam_.set_item(PAM.PAM_USER, str(username)) # Set the conversation callback pam_.set_item(PAM.PAM_CONV, pam_conv) try: pam_.authenticate() pam_.acct_mgmt() except PAM.error, resp: out.write("Error: " + str(resp) + "\n") return False except: return False # If we get here, the authentication worked return True My problem is that this function does not behave the same wether I use it in a simple script or through mod_python. To illustrate this, I wrote these simple cases: my_username = "markys" my_good_password = "lalala" my_bad_password = "lololo" def handler(req): req.content_type = "text/plain" req.write("1- " + str(auth(my_username,my_good_password,req) + "\n")) req.write("2- " + str(auth(my_username,my_bad_password,req) + "\n")) return apache.OK if __name__ == "__main__": print "1- " + str(auth(my_username,my_good_password,sys.__stdout__)) print "2- " + str(auth(my_username,my_bad_password,sys.__stdout__)) The result from the script is : Query list: [('Password: ', 1)] Our response: [('lalala', 0)] 1- True Query list: [('Password: ', 1)] Our response: [('lololo', 0)] Error: ('Authentication failure', 7) 2- False but the result from mod_python is : Query list: [('Password: ', 1)] Our response: [('lalala', 0)] Error: ('Authentication failure', 7) 1- False Query list: [('Password: ', 1)] Our response: [('lololo', 0)] Error: ('Authentication failure', 7) 2- False I don't understand why the auth function does not return the same value given the same inputs. Any idea where I got this wrong ? Here is the original script, if that could help you. Thanks a lot !

  Read the article

• How do I build a JSON object to send to an AJAX WebService?

  - by Ben McCormack

  After trying to format my JSON data by hand in javascript and failing miserably, I realized there's probably a better way. Here's what the code for the web service method and relevant classes looks like in C#: [WebMethod] public Response ValidateAddress(Request request) { return new test_AddressValidation().GenerateResponse( test_AddressValidation.ResponseType.Ambiguous); } ... public class Request { public Address Address; } public class Address { public string Address1; public string Address2; public string City; public string State; public string Zip; public AddressClassification AddressClassification; } public class AddressClassification { public int Code; public string Description; } The web service works great with using SOAP/XML, but I can't seem to get a valid response using javascript and jQuery because the message I get back from the server has a problem with my hand-coded JSON. I can't use the jQuery getJSON function because the request requires HTTP POST, so I'm using the lower-level ajax function instead: $.ajax({ type: "POST", contentType: "application/json; charset=utf-8", url: "http://bmccorm-xp/HBUpsAddressValidation/AddressValidation.asmx/ValidateAddress", data: "{\"Address\":{\"Address1\":\"123 Main Street\",\"Address2\":null,\"City\":\"New York\",\"State\":\"NY\",\"Zip\":\"10000\",\"AddressClassification\":null}}", dataType: "json", success: function(response){ alert(response); } }) The ajax function is submitting everything specified in data:, which is where my problem is. How do I build a properly formatted JSON object in javascript so I can plug it in to my ajax call like so: data: theRequest I'll eventually be pulling data out of text inputs in forms, but for now hard-coded test data is fine. How do I build a properly formatted JSON object to send to the web service?

  Read the article

• Implementing Model-level caching

  - by Byron

  I was posting some comments in a related question about MVC caching and some questions about actual implementation came up. How does one implement a Model-level cache that works transparently without the developer needing to manually cache, yet still remains efficient? I would keep my caching responsibilities firmly within the model. It is none of the controller's or view's business where the model is getting data. All they care about is that when data is requested, data is provided - this is how the MVC paradigm is supposed to work. (Source: Post by Jarrod) The reason I am skeptical is because caching should usually not be done unless there is a real need, and shouldn't be done for things like search results. So somehow the Model itself has to know whether or not the SELECT statement being issued to it worthy of being cached. Wouldn't the Model have to be astronomically smart, and/or store statistics of what is being most often queried over a long period of time in order to accurately make a decision? And wouldn't the overhead of all this make the caching useless anyway? Also, how would you uniquely identify a query from another query (or more accurately, a resultset from another resultset)? What about if you're using prepared statements, with only the parameters changing according to user input? Another poster said this: I would suggest using the md5 hash of your query combined with a serialized version of your input arguments. This would require twice the number of serialization options. I was under the impression that serialization was quite expensive, and for large inputs this might be even worse than just re-querying. And is the minuscule chance of collision worth worrying about? Conceptually, caching in the Model seems like a good idea to me, but it seems in practicality the developer should have direct control over caching and write it into the controller. Thoughts/ideas? Edit: I'm using PHP and MySQL if that helps to narrow your focus.

  Read the article

• Search and replace hundreds of strings in tens of thousands of files?

  - by C Johnson

  I am looking into changing the file name of hundreds of files in a (C/C++) project that I work on. The problem is our software has tens of thousands of files that including (i.e. #include) these hundreds of files that will get changed. This looks like a maintenance nightmare. If I do this I will be stuck in Ultra-Edit for weeks, rolling hundreds of regex's by hand like so: ^\#include.*["<\\/]stupid_name.*$ with #include <dir/new_name.h> Such drudgery would be worse than peeling hundreds of potatoes in a sunken submarine in the antarctic with a spoon. I think it would rather be ideal to put the inputs and outputs into a table like so: stupid_name.h <-> <dir/new_name.h> stupid_nameb.h <-> <dir/new_nameb.h> stupid_namec.h <-> <dir/new_namec.h> and feed this into a regular expression engine / tool / app / etc... My Ultimate Question: Is there a tool that will do that? Bonus Question: Is it multi-threaded? I looked at quite a few search and replace topics here on this website, and found lots of standard queries that asked a variant of the following question: standard question: Replace one term in N files. as opposed to: my question: Replace N terms in N files. Thanks in advance for any replies.

  Read the article

• jQuery UI Dialog and Textarea Focus Issue

  - by Gimli

  I'm working on a modal comment system using jQuery and jQuery UI, but I'm having some issues with focus. I have a series of divs inside the modal to switch between Login and Add comment, as below: <div id="modal" title="Loading"> <div id="modalContent"></div> <div id="modalLogin"> <div class="loginBox"></div> <div class="addCommentBox"></div> <div class="commentReview"></div> </div> </div> Inside of the addCommentBox div, I've got the comment code: <form action="/comments/add" class="addCommentForm" name="addCommentForm" method="post"> <textarea name="content" class="addCommentContent"></textarea> <button value="Add Comment" type="submit" class="commentPost"/> <button value="Clear Comment" type="submit" id="clearComment"/> </form> The issue is that about half the time after opening the dialog the textarea inside the addCommentBox div doesn't react to keyboard inputs when selected. The mouse works correctly and will allow text to be selected, but keyboard control does nothing. I have no event listeners on the textarea. I've got some on the buttons, but they are targeting only the buttons. The only thing that happens in the HTML seems to be the fact that every time I click on the modal, the z-index increases for the overall modal div. I have set the addCommentBox div to have a z-index of 9999, greater than the z-index of the modal. Any suggestions or directions to research would be greatly appreciated. Thanks!

  Read the article

< Previous Page | 42 43 44 45 46 47 48 49 50 51 52 53  | Next Page >