Search Results

Search found 56958 results on 2279 pages for 'system configuration'.

Page 46/2279 | < Previous Page | 42 43 44 45 46 47 48 49 50 51 52 53  | Next Page >

• How to prevent partial crash during VLAN configuration on a HP ProCurve 3500

  - by vm370

  as you can see from my question, I have a VLAN configuration problem with a ProCurve3500. The goal is to remove a VLAN from the existing configuration, however when I use the WEB UI to do this, I cannot modify ports to be assigned to a different VLAN or the Default VLAN. I always get the message "config failed", which is not very helpful. When I try to do it over telnet, the router somehow partially crashes and somehow the utilization on all ports is at 100% and I can barely use the web ui. After a reboot everything is fine again, but the configuration was not changed... The traffic after this partial crash looks like a broadcast storm, however there are definitely no loops in the segment. I also updated to the latest stable firmware, but the problem persists. Thanks a lot in advance Br vm370

  Read the article

• client denied by server configuration , Options ExecCGI is off in this directory

  - by John Smiith

  Error log [Wed Jul 04 06:01:54 2012] [error] [client 127.0.0.1] File does not exist: C:/xampp/www/htdocs/localhost/favicon.ico [Wed Jul 04 06:01:54 2012] [error] [client 127.0.0.1] client denied by server configuration: C:/xampp/Bin/apache [Wed Jul 04 06:01:58 2012] [error] [client 127.0.0.1] Options ExecCGI is off in this directory: C:/xampp/www/htdocs/wsgi_app/wsgi_handler.py [Wed Jul 04 06:01:58 2012] [error] [client 127.0.0.1] client denied by server configuration: C:/xampp/Bin/apache [Wed Jul 04 06:01:58 2012] [error] [client 127.0.0.1] File does not exist: C:/xampp/www/htdocs/localhost/favicon.ico [Wed Jul 04 06:01:58 2012] [error] [client 127.0.0.1] client denied by server configuration: C:/xampp/Bin/apache Virtual host <VirtualHost *:80> ServerAdmin [email protected] DocumentRoot "C:/xampp/www/htdocs/localhost" ServerName localhost ServerAlias www.localhost ErrorLog "logs/localhost-error.log" CustomLog "logs/localhost-access.log" combined </VirtualHost> mod_wsgi httpdconf WSGIScriptAlias /wsgi "C:/xampp/www/htdocs/wsgi_app/wsgi_handler.py" <Directory "C:/xampp/www/htdocs/wsgi_app/"> AllowOverride None Options None Order deny,allow Allow from all </Directory> http://localhost/wsgi giving 403 error

  Read the article

• Kickstart Partitioning Configuration

  - by Flo

  I'be been trying to run a kickstart script with the following partition configuration: #Clear the masterboot record zerombr bootloader --location=mbr --driveorder=sda --append=" rhgb crashkernel=auto quiet" # Set up the partitions/logical volumes/logical groups clearpart --all part /boot --fstype=ext4 --asprimary --size=512 --ondisk=sda part swap --size=2048 --fstype=swap --ondisk=sda part pv.01 --fstype=ext4 --grow --size=200 --ondisk=sda part pv.02 --fstype=ext4 --grow --size=200 --ondisk=sdb volgroup VolGroup pv.01 pv.02 --pesize=32768 logvol /opt --fstype=ext4 --name=opt.fs --vgname=VolGroup --size=40000 logvol / --fstype=ext4 --name=root.fs --vgname=VolGroup --size=78000 I have two hard drives and it looks to me like its a really simple configuration. When I run the kickstart I keep getting all these errors that have to do with python files for configuring partitions. The only actual maybe useful piece of information is KeyError /dev/sda/ I tried a number of alterations of this configuration but nothing really worked. Any ideas?

  Read the article

• How can I back up my ubuntu system?

  - by Eloff

  I'm sure there's a lot of questions on here similar to this, and I've been reading them, but I still feel this warrants a new question. I want nightly, incremental backups (full disk images would waste a lot of space - unless compressed somehow.) Preferably rotating or deleting old backups when running out of space or after a fixed number of backups. I want to be able to quickly and painlessly restore my system from these backups. This is my first time running ubuntu as my main development machine and I know from my experience with it as a server and in virtual machines that I regularly manage to make it unbootable or damage it to the point of being unable to rescue it. So how would you recommend I do this? There are so many options out there I really don't know where to start. There seems to be a vocal school of thought that it's sufficient to backup your home directory and the list of installed packages from the package manager. I've already installed lots of things from source, or outside of the package manager (development tools, ides, compilers, graphics drivers, etc.) So at the very least, if I do not back up the operating system itself I need to grab all config files, all program binaries, all created but required files, etc. I'd rather backup too much than too little - an ubuntu install is tiny anyway. Also this drastically reduces the restore time, which would cost me more in my time than the extra storage space. I tried using Deja Dup to backup the root partition, excluding some things like /mnt /media /dev /proc etc. Although many websites assured me you can backup a running linux system this way - that seems to be false as it complained that it could not backup the following files: /boot/System.map-3.0.0-17-generic /boot/System.map-3.2.0-22-generic /boot/vmcoreinfo-3.0.0-17-generic /boot/vmlinuz-3.0.0-17-generic /boot/vmlinuz-3.2.0-22-generic /etc/.pwd.lock /etc/NetworkManager/system-connections/LAN Connection /etc/apparmor.d/cache/lightdm-guest-session /etc/apparmor.d/cache/sbin.dhclient /etc/apparmor.d/cache/usr.bin.evince /etc/apparmor.d/cache/usr.lib.telepathy /etc/apparmor.d/cache/usr.sbin.cupsd /etc/apparmor.d/cache/usr.sbin.tcpdump /etc/apt/trustdb.gpg /etc/at.deny /etc/ati/inst_path_default /etc/ati/inst_path_override /etc/chatscripts /etc/cups/ssl /etc/cups/subscriptions.conf /etc/cups/subscriptions.conf.O /etc/default/cacerts /etc/fuse.conf /etc/group- /etc/gshadow /etc/gshadow- /etc/mtab.fuselock /etc/passwd- /etc/ppp/chap-secrets /etc/ppp/pap-secrets /etc/ppp/peers /etc/security/opasswd /etc/shadow /etc/shadow- /etc/ssl/private /etc/sudoers /etc/sudoers.d/README /etc/ufw/after.rules /etc/ufw/after6.rules /etc/ufw/before.rules /etc/ufw/before6.rules /lib/ufw/user.rules /lib/ufw/user6.rules /lost+found /root /run/crond.reboot /run/cups/certs /run/lightdm /run/lock/whoopsie/lock /run/udisks /var/backups/group.bak /var/backups/gshadow.bak /var/backups/passwd.bak /var/backups/shadow.bak /var/cache/apt/archives/lock /var/cache/cups/job.cache /var/cache/cups/job.cache.O /var/cache/cups/ppds.dat /var/cache/debconf/passwords.dat /var/cache/ldconfig /var/cache/lightdm/dmrc /var/crash/_usr_lib_x86_64-linux-gnu_colord_colord.102.crash /var/lib/apt/lists/lock /var/lib/dpkg/lock /var/lib/dpkg/triggers/Lock /var/lib/lightdm /var/lib/mlocate/mlocate.db /var/lib/polkit-1 /var/lib/sudo /var/lib/urandom/random-seed /var/lib/ureadahead/pack /var/lib/ureadahead/run.pack /var/log/btmp /var/log/installer/casper.log /var/log/installer/debug /var/log/installer/partman /var/log/installer/syslog /var/log/installer/version /var/log/lightdm/lightdm.log /var/log/lightdm/x-0-greeter.log /var/log/lightdm/x-0.log /var/log/speech-dispatcher /var/log/upstart/alsa-restore.log /var/log/upstart/alsa-restore.log.1.gz /var/log/upstart/console-setup.log /var/log/upstart/console-setup.log.1.gz /var/log/upstart/container-detect.log /var/log/upstart/container-detect.log.1.gz /var/log/upstart/hybrid-gfx.log /var/log/upstart/hybrid-gfx.log.1.gz /var/log/upstart/modemmanager.log /var/log/upstart/modemmanager.log.1.gz /var/log/upstart/module-init-tools.log /var/log/upstart/module-init-tools.log.1.gz /var/log/upstart/procps-static-network-up.log /var/log/upstart/procps-static-network-up.log.1.gz /var/log/upstart/procps-virtual-filesystems.log /var/log/upstart/procps-virtual-filesystems.log.1.gz /var/log/upstart/rsyslog.log /var/log/upstart/rsyslog.log.1.gz /var/log/upstart/ureadahead.log /var/log/upstart/ureadahead.log.1.gz /var/spool/anacron/cron.daily /var/spool/anacron/cron.monthly /var/spool/anacron/cron.weekly /var/spool/cron/atjobs /var/spool/cron/atspool /var/spool/cron/crontabs /var/spool/cups

  Read the article

• Why Your ERP System Isn't Ready for the Next Evolution of the Enterprise

  - by ken.pulverman

    ERP has been the backbone of enterprise software.  The data held in your ERP system is core of most companies.  Efficiencies gained through the accounting and resource allocation through ERP software have literally saved companies trillions of dollars. Not only does everything seem to be fine with your ERP system, you haven't had to touch it in years.  Why aren't you ready for what comes next? Well judging by the growth rates in the space (Oracle posted only a 3% growth rate, while SAP showed a 12% decline) there hasn't been much modernization going on, just a little replacement activity. If you are like most companies, your ERP system is connected to a proprietary middleware solution that only effectively talks with a handful of other systems you might have acquired from the same vendor.   Connecting your legacy system through proprietary middleware is expensive and brittle and if you are like most companies, you were only willing to pay an SI so much before you said "enough."  So your ERP is working.  It's humming along.  You might not be able to get Order to Promise information when you take orders in your call center, but there are work arounds that work just fine. So what's the problem? The problem is that you built your business around your ERP core, and now there is such pressure to innovate your business processes to keep up that you need a whole new slew of modern apps and you need ERP data to be accessible from everywhere.   Every time you change a sales territory or a comp plan or change a benefits provider your ERP system, literally the economic brain of your business, needs to know what's going on.  And this giant need to access and provide information to your ERP is only growing. What makes matters even more challenging is that apps today come in every flavor under the Sun™.   SaaS, cloud, managed, hybrid, outsourced, composite....and they all have different integration protocols. The only easy way to get ahead of all this is to modernize the way you connect and run your applications.  Unlike the middleware solutions of yesteryear, modern middleware is effectively the operating system of the enterprise.  In the same way that you rely on Apple, Microsoft, and Google to find a video driver for your 23" monitor or to ensure the Word or Keynote runs, modern middleware takes care of intra-application connectivity and process execution.  It effectively allows you to take ERP out of the middle while ensuring connectivity to your vital data for anything you want to do.  The diagram below reflects that change.    In this model, the hegemony of ERP is over.  It too has to become a stealthy modern app to help you quickly adapt to business changes while managing vital information.  And through modern middleware it will connect to everything.  So yes ERP as we've know it is dead, but long live ERP as a connected application member of the modern enterprise. I want to Thank Andrew Zoldan, Group Vice President Oracle Manufacturing Industries Business Unit for introducing me to how some of his biggest customers have benefited by modernizing their applications infrastructure and making ERP a connected application. by John Burke, Group Vice President, Applications Business Unit

  Read the article

• Why Your ERP System Isn't Ready for the Next Evolution of the Enterprise

  - by [email protected]

  By ken.pulverman on March 24, 2010 8:51 AM ERP has been the backbone of enterprise software. The data held in your ERP system is core of most companies. Efficiencies gained through the accounting and resource allocation through ERP software have literally saved companies trillions of dollars. Not only does everything seem to be fine with your ERP system, you haven't had to touch it in years. Why aren't you ready for what comes next? Well judging by the growth rates in the space (Oracle posted only a 3% growth rate, while SAP showed a 12% decline) there hasn't been much modernization going on, just a little replacement activity. If you are like most companies, your ERP system is connected to a proprietary middleware solution that only effectively talks with a handful of other systems you might have acquired from the same vendor. Connecting your legacy system through proprietary middleware is expensive and brittle and if you are like most companies, you were only willing to pay an SI so much before you said "enough." So your ERP is working. It's humming along. You might not be able to get Order to Promise information when you take orders in your call center, but there are work arounds that work just fine. So what's the problem? The problem is that you built your business around your ERP core, and now there is such pressure to innovate your business processes to keep up that you need a whole new slew of modern apps and you need ERP data to be accessible from everywhere. Every time you change a sales territory or a comp plan or change a benefits provider your ERP system, literally the economic brain of your business, needs to know what's going on. And this giant need to access and provide information to your ERP is only growing. What makes matters even more challenging is that apps today come in every flavor under the Sun™. SaaS, cloud, managed, hybrid, outsourced, composite....and they all have different integration protocols. The only easy way to get ahead of all this is to modernize the way you connect and run your applications. Unlike the middleware solutions of yesteryear, modern middleware is effectively the operating system of the enterprise. In the same way that you rely on Apple, Microsoft, and Google to find a video driver for your 23" monitor or to ensure that Word or Keynote runs, modern middleware takes care of intra-application connectivity and process execution. It effectively allows you to take ERP out of the middle while ensuring connectivity to your vital data for anything you want to do. The diagram below reflects that change. In this model, the hegemony of ERP is over. It too has to become a stealthy modern app to help you quickly adapt to business changes while managing vital information. And through modern middleware it will connect to everything. So yes ERP as we've know it is dead, but long live ERP as a connected application member of the modern enterprise. I want to Thank Andrew Zoldan, Group Vice President Oracle Manufacturing Industries Business Unit for introducing me to how some of his biggest customers have benefited by modernizing their applications infrastructure and making ERP a connected application. by John Burke, Group Vice President, Applications Business Unit

  Read the article

• Elo system behaves oddly in program I've created

  - by adc

  Alright, so I'm looking to build a small program (C# and XAML) that, essentially, does this: Generate array of players. Each player has a current rating and a true rating. I set current rating to 1200 as a starting point right now; I've also tried setting it to true rating and the average of the two. True rating is what their skill level actually is. Their true rating is calculated based on percentages from the current League of Legends rating system; generating an array of 970 thousand generates results very similar to the data from here: (removed due to URL limit - but trust me, the results are very similar). This array is of length specified by the user. If need be, sort the array from smallest to largest. Play X number of games, again specified by the user. This is done by taking the array of players (which is sorted by Current Rating after being created) and running through it in groups of 10. The first five are on team one, the second five are on team two. It then takes the True Rating of these players and calculates an expected chance to win using the Elo system. It generates a random double and compares it to the expected chance to win; if the number is lower, team one wins - otherwise team two wins. I then update the rating of the players via, again, the Elo system - giving the winning team a score of 1 and the losing team a score of 0. I use a K value of 36 (but have tried 12, 24, and even higher ones) and an F value of 400. After going through the entire loop of players (which I have conveniently forced to be a multiple of ten), it sorts the array - again via current rating. This, if my understanding of the Elo system is correct, runs properly. However, it doesn't seem to work. I have a running test telling me how many players of the full array are within 100 current rating of their true rating. I would expect some portion of the population to be outside this range (as probability is not always going to go in their favor), but a full 40-45% of the population is outside of this range. I also have it outputting the maximum difference between true and current rating - and I have never seen this drop below 500! It hovers between 550-600, occasionally going over or under. I'm at a loss as to what to change - I've fiddled with the K and F values, where I start all the players, etc. but nothing changes the fact that eventually a good 40% of the population is outside the range. And it isn't that I have it playing too few games - it's now run through over 60 thousand games and the problem never disappears or really fluctuates. The full C# code, including everything except the XAML file and the Player class (pastebin is being very slow and I can only post two links, so I can't link to the XAML file): http://pastebin.com/rFcZRL84 The Player class: http://pastebin.com/4cJTdTRu I guess my question is did I do anything wrong? Is there a problem with the way I implemented the system, or is it just that Riot uses a significantly modified Elo system? I don't think it's the latter, as that still wouldn't explain the massive true and current rating differences to me, however.

  Read the article

• wcf callback exception after updating to .net 4.0

  - by James

  I have a wcf service that uses callbacks with DualHttpBindings. The service pushes back a datatable of search results the client (for a long running search) as it finds them. This worked fine in .Net 3.5. Since I updated to .Net 4.0, it bombs out with a System.Runtime.FatalException that actually kills the IIS worker process. I have no idea how to even go about starting to fix this. Any recommendations appreciated. The info from the resulting event log is pasted below. An unhandled exception occurred and the process was terminated. Application ID: /LM/W3SVC/2/ROOT/CP Process ID: 5284 Exception: System.Runtime.FatalException Message: Object reference not set to an instance of an object. StackTrace: at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage4(MessageRpc& rpc) at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage31(MessageRpc& rpc) at System.ServiceModel.Dispatcher.MessageRpc.Process(Boolean isOperationContextSet) at System.ServiceModel.Dispatcher.ChannelHandler.DispatchAndReleasePump(RequestContext request, Boolean cleanThread, OperationContext currentOperationContext) at System.ServiceModel.Dispatcher.ChannelHandler.HandleRequest(RequestContext request, OperationContext currentOperationContext) at System.ServiceModel.Dispatcher.ChannelHandler.AsyncMessagePump(IAsyncResult result) at System.Runtime.Fx.AsyncThunk.UnhandledExceptionFrame(IAsyncResult result) at System.Runtime.AsyncResult.Complete(Boolean completedSynchronously) at System.Runtime.InputQueue1.AsyncQueueReader.Set(Item item) at System.Runtime.InputQueue1.Dispatch() at System.ServiceModel.Channels.ReliableDuplexSessionChannel.ProcessDuplexMessage(WsrmMessageInfo info) at System.ServiceModel.Channels.ReliableDuplexSessionChannel.HandleReceiveComplete(IAsyncResult result) at System.ServiceModel.Channels.ReliableDuplexSessionChannel.OnReceiveCompletedStatic(IAsyncResult result) at System.Runtime.Fx.AsyncThunk.UnhandledExceptionFrame(IAsyncResult result) at System.Runtime.AsyncResult.Complete(Boolean completedSynchronously) at System.ServiceModel.Channels.ReliableChannelBinder1.InputAsyncResult1.OnInputComplete(IAsyncResult result) at System.Runtime.Fx.AsyncThunk.UnhandledExceptionFrame(IAsyncResult result) at System.Runtime.AsyncResult.Complete(Boolean completedSynchronously) at System.Runtime.InputQueue1.AsyncQueueReader.Set(Item item) at System.Runtime.InputQueue1.Dispatch() at System.Runtime.IOThreadScheduler.ScheduledOverlapped.IOCallback(UInt32 errorCode, UInt32 numBytes, NativeOverlapped* nativeOverlapped) at System.Runtime.Fx.IOCompletionThunk.UnhandledExceptionFrame(UInt32 error, UInt32 bytesRead, NativeOverlapped* nativeOverlapped) at System.Threading._IOCompletionCallback.PerformIOCompletionCallback(UInt32 errorCode, UInt32 numBytes, NativeOverlapped* pOVERLAP) InnerException: * System.NullReferenceException* Message: Object reference not set to an instance of an object. StackTrace: at System.Web.HttpApplication.ThreadContext.Enter(Boolean setImpersonationContext) at System.Web.HttpApplication.OnThreadEnterPrivate(Boolean setImpersonationContext) at System.Web.AspNetSynchronizationContext.CallCallbackPossiblyUnderLock(SendOrPostCallback callback, Object state) at System.Web.AspNetSynchronizationContext.CallCallback(SendOrPostCallback callback, Object state) at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage4(MessageRpc& rpc)

  Read the article

• Creating metadata value relationships

  - by kyle.hatlestad

  I was recently asked an question about an interesting use case. They wanted content to be submitted into UCM with a particular ID in a custom metadata field. But they wanted that ID to be translated during submission into an employee name in another metadata field upon submission. My initial thought was that this could be done with a dependent choice list (DCL). One option list field driving the choices in another. But this didn't work in this case for a couple of reasons. First, the number of IDs could potentially be very large. So making that into a drop-down list would not be practical. The preference would be for that field to simply be a text field to type in the ID. Secondly, data could be submitted through different methods other then the web-based check-in form. And without an interface to select the DCL choices, the system needed a way to determine and populate the name field. So instead I went the approach of having the value of the ID field drive the value of the Name field using the derived field approach in my rule. In looking at it though, it was easy to simply copy the value of the ID field into the Name field...but to have it look up and translate the value proved to be the tricky part. So here is the approach I took... First I created my two metadata fields as standard text fields in the Configuration Manager applet. Next I create a table that stores the relationship between the IDs and Names. I then create a View into that table and set the column to the EmployeeID. I now create a new Application Field and set it as an option list using the View I created in the previous step. The reason I create it as an Application field is because I don't need to display the field or store a value in it. I simply need to make use of the option list in the next step... Finally, I create a Rule in which I select the Employee Name field and turn on the 'Is derived field' checkbox. I edit the derived value and add a new condition. Because the option list is a Application field and not an Information field, I can't use the Compute button. Instead, I insert this line directly in the Value field: @getFieldViewValue("EmployeeMapping",#active.xEmployeeID, "EmployeeName") The "EmployeeMapping" parameter designates that the value should be pulled from the EmployeeMapping Application field that I had created in the previous step. The #active.xEmployeeID field is the ID value that should be pulled from what the user entered. "EmployeeName" is the column name in the table which has the value which corresponds to the ID. The extracted name then becomes the value within our Employee Name field. That's it. You can then add additional Rules to make the Name field read-only/hidden on the check-in page and such.

  Read the article

• What are the common maintenance tasks on ubuntu?

  - by DaNieL

  When i was using windows, i used to run defrags, ccleaner and revouninstaller once a month to keep the system and the registry clean. I know ubuntu (and all linux distro) has a different system structure and doesnt need defrags, but i've heard there are some mainenance tasks that help to keep the system clean (for example, sudo apt-get clean or sudo apt-get autoremove) How many of those commands/software (and please explain what they do and if they can compromise the system stability) do you know and use regularly?

  Read the article

• Filtering option list values based on security in UCM

  - by kyle.hatlestad

  Fellow UCM blog writer John Sim recently posted a comment asking about filtering values based on the user's security. I had never dug into that detail before, but thought I would take a look. It ended up being tricker then I originally thought and required a bit of insider knowledge, so I thought I would share. The first step is to create the option list table in Configuration Manager. You want to define the column for the option list value and any other columns desired. You then want to have a column which will store the security attribute to apply to the option list value. In this example, we'll name the column 'dGroupName'. Next step is to create a View based on the new table. For the Internal and Visible column, you can select the option list column name. Then click on the Security tab, uncheck the 'Publish view data' checkbox and select the 'Use standard document security' radio button. Click on the 'Edit Values...' button and add the values for the option list. In the dGroupName field, enter the Security Group (or Account if you use Accounts for security) to apply to that value. Create the custom metadata field and apply the View just created. The next step requires file system access to the server. Open the file [ucm directory]\data\schema\views\[view name].hda in a text editor. Below the line '@Properties LocalData', add the line: schSecurityImplementorColumnMap=dGroupName:dSecurityGroup The 'dGroupName' value designates the column in the table which stores the security value. 'dSecurityGroup' indicates the type of security to check against. It would be 'dDocAccount' if using Accounts. Save the file and restart UCM. Now when a user goes to the check-in page, they will only see the options for which they have read and write privileges to the associated Security Group. And on the Search page, they will see the options for which they have just read access. One thing to note is if a value that a user normally can't view on Check-in or Search is applied to a document, but the document is viewable by the user, the user will be able to see the value on the Content Information screen.

  Read the article

• June 23, 1983: First Successful Test of the Domain Name System [Geek History]

  - by Jason Fitzpatrick

  Nearly 30 years ago the first Domain Name System (DNS) was tested and it changed the way we interacted with the internet. Nearly impossible to remember number addresses became easy to remember names. Without DNS you’d be browsing a web where numbered addresses pointed to numbered addresses. Google, for example, would look like http://209.85.148.105/ in your browser window. That’s assuming, of course, that a numbers-based web every gained enough traction to be popular enough to spawn a search giant like Google. How did this shift occur and what did we have before DNS? From Wikipedia: The practice of using a name as a simpler, more memorable abstraction of a host’s numerical address on a network dates back to the ARPANET era. Before the DNS was invented in 1983, each computer on the network retrieved a file called HOSTS.TXT from a computer at SRI. The HOSTS.TXT file mapped names to numerical addresses. A hosts file still exists on most modern operating systems by default and generally contains a mapping of the IP address 127.0.0.1 to “localhost”. Many operating systems use name resolution logic that allows the administrator to configure selection priorities for available name resolution methods. The rapid growth of the network made a centrally maintained, hand-crafted HOSTS.TXT file unsustainable; it became necessary to implement a more scalable system capable of automatically disseminating the requisite information. At the request of Jon Postel, Paul Mockapetris invented the Domain Name System in 1983 and wrote the first implementation. The original specifications were published by the Internet Engineering Task Force in RFC 882 and RFC 883, which were superseded in November 1987 by RFC 1034 and RFC 1035.Several additional Request for Comments have proposed various extensions to the core DNS protocols. Over the years it has been refined but the core of the system is essentially the same. When you type “google.com” into your web browser a DNS server is used to resolve that host name to the IP address of 209.85.148.105–making the web human-friendly in the process. Domain Name System History [Wikipedia via Wired] What is a Histogram, and How Can I Use it to Improve My Photos?How To Easily Access Your Home Network From Anywhere With DDNSHow To Recover After Your Email Password Is Compromised

  Read the article

• design a model for a system of dependent variables

  - by dbaseman

  I'm dealing with a modeling system (financial) that has dozens of variables. Some of the variables are independent, and function as inputs to the system; most of them are calculated from other variables (independent and calculated) in the system. What I'm looking for is a clean, elegant way to: define the function of each dependent variable in the system trigger a re-calculation, whenever a variable changes, of the variables that depend on it A naive way to do this would be to write a single class that implements INotifyPropertyChanged, and uses a massive case statement that lists out all the variable names x1, x2, ... xn on which others depend, and, whenever a variable xi changes, triggers a recalculation of each of that variable's dependencies. I feel that this naive approach is flawed, and that there must be a cleaner way. I started down the path of defining a CalculationManager<TModel> class, which would be used (in a simple example) something like as follows: public class Model : INotifyPropertyChanged { private CalculationManager<Model> _calculationManager = new CalculationManager<Model>(); // each setter triggers a "PropertyChanged" event public double? Height { get; set; } public double? Weight { get; set; } public double? BMI { get; set; } public Model() { _calculationManager.DefineDependency<double?>( forProperty: model => model.BMI, usingCalculation: (height, weight) => weight / Math.Pow(height, 2), withInputs: model => model.Height, model.Weight); } // INotifyPropertyChanged implementation here } I won't reproduce CalculationManager<TModel> here, but the basic idea is that it sets up a dependency map, listens for PropertyChanged events, and updates dependent properties as needed. I still feel that I'm missing something major here, and that this isn't the right approach: the (mis)use of INotifyPropertyChanged seems to me like a code smell the withInputs parameter is defined as params Expression<Func<TModel, T>>[] args, which means that the argument list of usingCalculation is not checked at compile time the argument list (weight, height) is redundantly defined in both usingCalculation and withInputs I am sure that this kind of system of dependent variables must be common in computational mathematics, physics, finance, and other fields. Does someone know of an established set of ideas that deal with what I'm grasping at here? Would this be a suitable application for a functional language like F#? Edit More context: The model currently exists in an Excel spreadsheet, and is being migrated to a C# application. It is run on-demand, and the variables can be modified by the user from the application's UI. Its purpose is to retrieve variables that the business is interested in, given current inputs from the markets, and model parameters set by the business.

  Read the article

• Flattening System.Web.UI ControlCollection

  - by evovision

  Hi,   Sometimes one may need to get a list of child controls inside specific container and don't care about the underlying hierarchy.   The result is beautifully achieved using this extension method:   using System;using System.Collections.Generic;using System.Linq;using System.Web;using System.Web.UI;    public static class ControlCollectionExtensionMethods    {        public static IEnumerable<Control> FlattenedList(this ControlCollection controls)        {            foreach (Control ctrl in controls)            {                  // return parent control                   yield return ctrl;                              // and dive into child collection                   foreach (Control child in ctrl.Controls.FlattenedList())                         yield return child;            }        }    }   P.S.: don't forget about namespaces when using it in your code, if above class is wrapped into namespace, for example: Sample, the source code file with calling code must explicitly reference it: using Sample;

  Read the article

• Can the features of Dell OpenManage be replaced by Microsoft System Center?

  - by bwerks

  Hi all, I'm new to both OpenManage and System Center, but it sounds as if they're geared towards similar problems/goals. Are the features comparable enough that OpenManage can be forgone completely in favor of System Center products? Specifically I'm hoping to achieve storage monitoring and remote administration, although if someone with experience with both wants to provide a quick compare/contrast (objective, of course) I won't complain. Thanks!

  Read the article

• Would it be possible to swap system restore points on different brands of computers?

  - by P'sao

  So I have a ThinkPad computer that I've installed a program called "Deep Freeze" which restores your computer to the "Frozen" state. I also have a Toshiba computer with no Deep Freeze on it. My question is that would it be possible to creat a system restore point on my Toshiba and then replace the system volume information folder with the one on the ThinkPad so I could restore to a point with no Deep Freeze? Would this work?

  Read the article

• How do I minimize Evolution to the system tray in Ubuntu?

  - by Jephir

  In Ubuntu some applications can be set to minimize instead of exit on close. For example, Empathy minimizes to the system tray (mail icon) when the close button is pressed in the application window. How do I make Evolution do this as well? Essentially I would like to have Evolution hidden in the system tray instead of having to re-launch it every ten minutes to check for new messages (or leave it open and clutter the taskbar).

  Read the article

• How to Configure OpenLDAP on Ubuntu 10.04 Server

  - by user3215

  I am following the Ubuntu server guide to configure OpenLDAP on an Ubuntu 10.04 server, but can not get it to work. When I try to use sudo ldapadd -x -D cn=admin,dc=don,dc=com -W -f frontend.ldif I'm getting the following error: Enter LDAP Password: <entered 'secret' as password> adding new entry "dc=don,dc=com" ldap_add: Naming violation (64) additional info: value of single-valued naming attribute 'dc' conflicts with value present in entry Again when I try to do the same, I'm getting the following error: root@avy-desktop:/home/avy# sudo ldapadd -x -D cn=admin,dc=don,dc=com -W -f frontend.ldif Enter LDAP Password: ldap_bind: Invalid credentials (49) Here is the backend.ldif file: # Load dynamic backend modules dn: cn=module,cn=config objectClass: olcModuleList cn: module olcModulepath: /usr/lib/ldap olcModuleload: back_hdb # Database settings dn: olcDatabase=hdb,cn=config objectClass: olcDatabaseConfig objectClass: olcHdbConfig olcDatabase: {1}hdb olcSuffix: dc=don,dc=com olcDbDirectory: /var/lib/ldap olcRootDN: cn=admin,dc=don,dc=com olcRootPW: secret olcDbConfig: set_cachesize 0 2097152 0 olcDbConfig: set_lk_max_objects 1500 olcDbConfig: set_lk_max_locks 1500 olcDbConfig: set_lk_max_lockers 1500 olcDbIndex: objectClass eq olcLastMod: TRUE olcDbCheckpoint: 512 30 olcAccess: to attrs=userPassword by dn="cn=admin,dc=don,dc=com" write by anonymous auth by self write by * none olcAccess: to attrs=shadowLastChange by self write by * read olcAccess: to dn.base="" by * read olcAccess: to * by dn="cn=admin,dc=don,dc=com" write by * read frontend.ldif file: # Create top-level object in domain dn: dc=don,dc=com objectClass: top objectClass: dcObject objectclass: organization o: Example Organization dc: Example description: LDAP Example # Admin user. dn: cn=admin,dc=don,dc=com objectClass: simpleSecurityObject objectClass: organizationalRole cn: admin description: LDAP administrator userPassword: secret dn: ou=people,dc=don,dc=com objectClass: organizationalUnit ou: people dn: ou=groups,dc=don,dc=com objectClass: organizationalUnit ou: groups dn: uid=john,ou=people,dc=don,dc=com objectClass: inetOrgPerson objectClass: posixAccount objectClass: shadowAccount uid: john sn: Doe givenName: John cn: John Doe displayName: John Doe uidNumber: 1000 gidNumber: 10000 userPassword: password gecos: John Doe loginShell: /bin/bash homeDirectory: /home/john shadowExpire: -1 shadowFlag: 0 shadowWarning: 7 shadowMin: 8 shadowMax: 999999 shadowLastChange: 10877 mail: [email protected] postalCode: 31000 l: Toulouse o: Example mobile: +33 (0)6 xx xx xx xx homePhone: +33 (0)5 xx xx xx xx title: System Administrator postalAddress: initials: JD dn: cn=example,ou=groups,dc=don,dc=com objectClass: posixGroup cn: example gidNumber: 10000 Can anyone help me?

  Read the article

• How to configure ldap on ubuntu 10.04 server

  - by user3215

  I am following the link to configure ldap on ubuntu 10.04 server but could not. when I try to use sudo ldapadd -x -D cn=admin,dc=don,dc=com -W -f frontend.ldif I'm getting the following error: Enter LDAP Password: <entered 'secret' as password> adding new entry "dc=don,dc=com" ldap_add: Naming violation (64) additional info: value of single-valued naming attribute 'dc' conflicts with value present in entry Again when I try to do the same, I'm getting the following error: root@avy-desktop:/home/avy# sudo ldapadd -x -D cn=admin,dc=don,dc=com -W -f frontend.ldif Enter LDAP Password: ldap_bind: Invalid credentials (49) Here is the backend.ldif file # Load dynamic backend modules dn: cn=module,cn=config objectClass: olcModuleList cn: module olcModulepath: /usr/lib/ldap olcModuleload: back_hdb # Database settings dn: olcDatabase=hdb,cn=config objectClass: olcDatabaseConfig objectClass: olcHdbConfig olcDatabase: {1}hdb olcSuffix: dc=don,dc=com olcDbDirectory: /var/lib/ldap olcRootDN: cn=admin,dc=don,dc=com olcRootPW: secret olcDbConfig: set_cachesize 0 2097152 0 olcDbConfig: set_lk_max_objects 1500 olcDbConfig: set_lk_max_locks 1500 olcDbConfig: set_lk_max_lockers 1500 olcDbIndex: objectClass eq olcLastMod: TRUE olcDbCheckpoint: 512 30 olcAccess: to attrs=userPassword by dn="cn=admin,dc=don,dc=com" write by anonymous auth by self write by * none olcAccess: to attrs=shadowLastChange by self write by * read olcAccess: to dn.base="" by * read olcAccess: to * by dn="cn=admin,dc=don,dc=com" write by * read frontend.ldif file: # Create top-level object in domain dn: dc=don,dc=com objectClass: top objectClass: dcObject objectclass: organization o: Example Organization dc: Example description: LDAP Example # Admin user. dn: cn=admin,dc=don,dc=com objectClass: simpleSecurityObject objectClass: organizationalRole cn: admin description: LDAP administrator userPassword: secret dn: ou=people,dc=don,dc=com objectClass: organizationalUnit ou: people dn: ou=groups,dc=don,dc=com objectClass: organizationalUnit ou: groups dn: uid=john,ou=people,dc=don,dc=com objectClass: inetOrgPerson objectClass: posixAccount objectClass: shadowAccount uid: john sn: Doe givenName: John cn: John Doe displayName: John Doe uidNumber: 1000 gidNumber: 10000 userPassword: password gecos: John Doe loginShell: /bin/bash homeDirectory: /home/john shadowExpire: -1 shadowFlag: 0 shadowWarning: 7 shadowMin: 8 shadowMax: 999999 shadowLastChange: 10877 mail: [email protected] postalCode: 31000 l: Toulouse o: Example mobile: +33 (0)6 xx xx xx xx homePhone: +33 (0)5 xx xx xx xx title: System Administrator postalAddress: initials: JD dn: cn=example,ou=groups,dc=don,dc=com objectClass: posixGroup cn: example gidNumber: 10000 Anybody could help me?

  Read the article

• Where to store global enterprise properties?

  - by shylynx

  I'm faced with a crowd of java applications, which need different global enterprise wide properties for operation, for example: hostname of the central RDBMS, hostname and location of the central self-service portal, host location of central LDAP, host location of central mail server etc. Formally we build each application with a properties file, where all this properties are definied. But that's a very bad solution, because if the hostname of the mail server changes, we need to change the properties files for each application and deploy all applications again. Our idea is to centralize this properties, so that each application can ask for each property at runtime, for example: Idea: Put the properties file to an easy accessible file share. So if we need to change a property, each application uses the new properties. Idea: Put the properties to database. Main disadvantage: we need a dependency to database client libraries for each application. Idea: Put all applications into one big application server, that provides system properties for each application. Main disadvantage: needs deployment of each application to one application server. But that isn't a realistic scenario. Idea: Webservice that provides global enterprise wide properties. Main disadvantage: not very secure, because some properties are passwords or user credentials. What other alternatives are recommended? What is state of the art?

  Read the article

• Problems with microphone and network

  - by AnoonymoouS

  Hello... very good day everybody! I'm having some problems regarding the Ubuntu 12.4.01 LTS. For this reason, cordially i ask everyone's help. Such problems can be summed up in network (01) and audio (02)! 01) I can not set a DSL network settings in the "upper bar" (on side the clock). When i create the connection, the system says that the cables modem are disconnected! I can only use the internet if i set up a connection at terminal through the command "pppoeconf". Follows the print screen of what i mentioned above:. http://i.imgur.com/8nTrF.png Obs.: Note that even after the connection "created", it does not appear there! 02) The sound is reproduced; however, can not be captured! I can not make recordings, obviously i can't use the microphone. I believe that something is giving interference or the settings are wrong! Follows the video of what i mentioned above:. http://dl.dropbox.com/u/41085750/Projeto%20Padr%C3%A3o.mp4 Obs.: I'm listening to music, so that interference errors may appear in the video. By kindness; who can help me... help me! I sought help at various sites and forums but unfortunately, i did not get success. I wait anxiously for a direction. Regards, Anoonymoous.

  Read the article

• Should I use a config file or database for storing business rules?

  - by foiseworth

  I have recently been reading The Pragmatic Programmer which states that: Details mess up our pristine code—especially if they change frequently. Every time we have to go in and change the code to accommodate some change in business logic, or in the law, or in management's personal tastes of the day, we run the risk of breaking the system—of introducing a new bug. Hunt, Andrew; Thomas, David (1999-10-20). The Pragmatic Programmer: From Journeyman to Master (Kindle Locations 2651-2653). Pearson Education (USA). Kindle Edition. I am currently programming a web app that has some models that have properties that can only be from a set of values, e.g. (not actual example as the web app data confidential): light-type = sphere / cube / cylinder The light type can only be the above three values but according to TPP I should always code as if they could change and place their values in a config file. As there are several incidents of this throughout the app, my question is: Should I store possibly values like these in: a config file: 'light-types' = array(sphere, cube, cylinder), 'other-type' = value, 'etc = etc-value a single table in a database with one line for each config item a database with a table for each config item (e.g. table: light_types; columns: id, name) some other way? Many thanks for any assistance / expertise offered.

  Read the article

• Make middle-click close window(s) on unity launcher

  - by humanityANDpeace

  I am looking for a way to achieve this on my 12.04 ubuntu system: Clicking with the middle mouse button on one of the unity launcher icons will close the related windows/programs. At present a middle-button-click causes (when possible) another instance of the same programme to start. There is nothing wrong with that, only I use this less often than I need a quick way to close some programs. The current way is a lengthy 2-click way. Right-click on the icon Select "quit" in the unity-setting in the ccsm (compiz config settings manager) some few things can be changed in the ubuntu unity plugin already. there are other reporst about settings being done in dconf and gconf. What chances are there to tweak the behavior as described above? In Firefox I am used to close tabs by "middle-clicking" on the tabs. In GLX/Cairo-dock I also associate "middle-click" with the close the program. When using ubuntu unity launcher I keep on mistakingly opening new windows, when indeed I wanna close the respective window(s). :(

  Read the article

• Likewise DomainJoin hangs on Finishing krb5.conf configuration

  - by dreay

  Hello, I have a problem when joining a CentOS release 5.4 (Final) x64 machine to the domain after running domainjoin-cli --loglevel info --log . join domain.local password I obtain the following, which seems to hang on "20100428112821:INFO:Finishing krb5.conf configuration" 20100428112817:INFO:Domainjoin invoked with the join command (remaining arguments will be printed later): 20100428112817:INFO: [/opt/likewise/bin/domainjoin-cli] 20100428112817:INFO: [--loglevel] 20100428112817:INFO: [info] 20100428112817:INFO: [--log] 20100428112817:INFO: [/tmp/join_1.log] 20100428112817:INFO: [join] 20100428112817:INFO:Checking status of daemon [/etc/init.d/lwsmd] 20100428112817:INFO:Daemon [/etc/init.d/lwsmd]: status [0] 20100428112817:INFO:Checking status of daemon [/etc/init.d/lwsmd] 20100428112817:INFO:Daemon [/etc/init.d/lwsmd]: status [0] 20100428112817:INFO:Checking status of daemon [/etc/init.d/lwregd] 20100428112817:INFO:Daemon [/etc/init.d/lwregd]: status [0] 20100428112817:INFO:Checking status of daemon [/etc/init.d/lwregd] 20100428112817:INFO:Daemon [/etc/init.d/lwregd]: status [0] 20100428112817:INFO:Checking status of daemon [/etc/init.d/netlogond] 20100428112817:INFO:Daemon [/etc/init.d/netlogond]: status [0] 20100428112817:INFO:Checking status of daemon [/etc/init.d/netlogond] 20100428112817:INFO:Daemon [/etc/init.d/netlogond]: status [0] 20100428112817:INFO:Checking status of daemon [/etc/init.d/lwiod] 20100428112817:INFO:Daemon [/etc/init.d/lwiod]: status [0] 20100428112817:INFO:Checking status of daemon [/etc/init.d/lwiod] 20100428112817:INFO:Daemon [/etc/init.d/lwiod]: status [0] 20100428112817:INFO:Checking status of daemon [/etc/init.d/dcerpcd] 20100428112817:INFO:Daemon [/etc/init.d/dcerpcd]: status [0] 20100428112817:INFO:Checking status of daemon [/etc/init.d/dcerpcd] 20100428112817:INFO:Daemon [/etc/init.d/dcerpcd]: status [0] 20100428112817:INFO:Checking status of daemon [/etc/init.d/eventlogd] 20100428112817:INFO:Daemon [/etc/init.d/eventlogd]: status [0] 20100428112817:INFO:Checking status of daemon [/etc/init.d/eventlogd] 20100428112817:INFO:Daemon [/etc/init.d/eventlogd]: status [0] 20100428112817:INFO:Checking status of daemon [/etc/init.d/lsassd] 20100428112817:INFO:Daemon [/etc/init.d/lsassd]: status [0] 20100428112817:INFO:Checking status of daemon [/etc/init.d/lsassd] 20100428112817:INFO:Daemon [/etc/init.d/lsassd]: status [0] 20100428112817:INFO:Domainjoin invoked with 2 arg(s) to the join command: 20100428112817:INFO: [domain.local] 20100428112817:INFO: [default.user] 20100428112817:INFO:Adding ops (fqdn ops.domain.local) to /etc/hosts ip 192.168.246.5, removing ops, ops.domain.local, ops, ops.domain.local 20100428112817:INFO:Reading krb5 file /tmp/likewisetmpPkpAn5/etc/krb5.conf 20100428112817:INFO:Reading krb5 file /tmp/likewisetmpb6dkNX/etc/krb5.conf 20100428112817:INFO:Reading nsswitch file /etc/nsswitch.conf 20100428112817:INFO:Reading pam configuration 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/config-util.rpmnew 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/config-util 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/runuser-l 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/sshd 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/other 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/smtp.postfix 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/su-l 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/system-switch-mail-nox 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/kshell 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/authconfig 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/ekshell 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/run_init 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/screen 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/eject 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/system-auth.rpmnew 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/system-config-network-cmd 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/system-auth-ac 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/kbdrate 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/smtp.sendmail 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/chsh 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/setup 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/system-switch-mail 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/ksu 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/login 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/sudo-i 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/smtp 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/runuser 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/chfn 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/ppp 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/gssftp 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/remote 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/reboot 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/newrole 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/pm-powersave 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/system-auth 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/halt 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/other.rpmnew 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/atd 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/passwd 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/authconfig-tui 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/pm-hibernate 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/su 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/system-config-network 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/neat 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/pm-suspend-hybrid 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/crond 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/sudo 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/pm-suspend 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/poweroff 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.conf 20100428112817:INFO:File /tmp/likewisetmptrO2dQ/etc/pam.conf does not exist 20100428112817:INFO:Found config file /etc/ssh/sshd_config 20100428112817:INFO:Found binary /usr/sbin/sshd 20100428112817:INFO:Reading ssh file /etc/ssh/sshd_config 20100428112817:INFO:Found open sshd version 4.3.-1p2 20100428112817:INFO:Testing option ChallengeResponseAuthentication 20100428112817:INFO:Option ChallengeResponseAuthentication supported 20100428112817:INFO:Testing option UsePAM 20100428112817:INFO:Option UsePAM supported 20100428112817:INFO:Testing option PAMAuthenticationViaKBDInt 20100428112817:INFO:Option PAMAuthenticationViaKBDInt not supported 20100428112817:INFO:Testing option KbdInteractiveAuthentication 20100428112817:INFO:Option KbdInteractiveAuthentication supported 20100428112817:INFO:Testing option GSSAPIAuthentication 20100428112817:INFO:Option GSSAPIAuthentication supported 20100428112817:INFO:Testing option GSSAPICleanupCredentials 20100428112817:INFO:Option GSSAPICleanupCredentials supported 20100428112817:INFO:Found config file /etc/ssh/ssh_config 20100428112817:INFO:Found binary /usr/bin/ssh 20100428112817:INFO:Reading ssh file /etc/ssh/ssh_config 20100428112817:INFO:Testing option GSSAPIAuthentication 20100428112817:INFO:Option GSSAPIAuthentication supported 20100428112817:INFO:Testing option GSSAPIDelegateCredentials 20100428112817:INFO:Option GSSAPIDelegateCredentials supported 20100428112821:INFO:Running module join 20100428112821:INFO:Starting krb5.conf configuration (enabling) 20100428112821:INFO:Reading krb5 file /tmp/likewisetmpvgqQmT/etc/krb5.conf 20100428112821:WARNING:Short domain name not specified. Defaulting to 'betgenius' 20100428112821:INFO:Failed to run lwinet ads trusts. This is expected if not yet joined to the domain 20100428112821:INFO:Failed to run lwiinfo --details -m. This is expected if the auth daemon is not running 20100428112821:INFO:Writing krb5 file /tmp/likewisetmpvgqQmT/etc/krb5.conf 20100428112821:INFO:File /tmp/likewisetmpvgqQmT/etc/krb5.conf modified 20100428112821:INFO:Finishing krb5.conf configuration Has anyone seen this error before? and know of the fix?

  Read the article

• Can I use netgroup at an NIS Client (Redhat) to restrict access to it?

  - by sdmythos_gr

  Our company has a central NIS configuration that we are using to access our teams servers (Redhat)... The current configuration allows all valid NIS authenticated users to connect to our servers. We cannot update or change something on the NIS Master Server... so... Is there a way to use netgroups or some other configuration to allow our team members to authenticate using the NIS server but still restrict access to all other users? Thanks!

  Read the article

< Previous Page | 42 43 44 45 46 47 48 49 50 51 52 53  | Next Page >