Search Results

Search found 3008 results on 121 pages for 'tech writer'.

Page 46/121 | < Previous Page | 42 43 44 45 46 47 48 49 50 51 52 53  | Next Page >

• need tool for migrating zen cart to Magento

  - by ogray

  see subj there's a tool for oscommerce to magento migration, but i'm not very tech-skilled I need to transfer: products and categories customers and orders template design

  Read the article

• Is One Tool or a Suite of Tools Better for Scrum?

  - by Rob Wells

  G'day, Edit: We've been using Scrum very successfully for several years on several projects of varying sizes. In fact, our team developed the successful iPlayer project for the BBC using a classical Scrum approach. After using various combinations of tools, some high-tech, some low-tech, across these projects we now wish to try adopting a suitable tool suite. Our manager is to some extent attempting to force the adoption of a single suite of tools for Scrum. I've looked at the SO question "Best Scrum tools" and most people seem to recommend either: a suite of low-tech solutions, e.g. whiteboards, post-its, index cards, etc., or a monolithic tool that tries to satisfy as much as possible of the process, e.g. Agilo, Mingle, ScrumWorks, Target Process, etc. Our team is currently evaluating several different Scrum tools. However, we are looking at selecting a single, monolithic tool, e.g. Agilo. All of the "one-stop" solutions have their strengths and weaknesses with the serious enterprise type solutions being the best sort of fit. But all have some short comings. After reading the paper "Peer Code Review: An Agile Process" over at SmartBear I started wondering if we were trying to force adoption of a tool on a "best fit" basis. I think you can take a couple of reference artefacts of the Scrum development process, say user stories, epics and themes, and the code base which must use a well-known SCM, e.g. SVN, Hg, etc. Then if we take that as the common reference points for the tools employed then we would be able to use a group of tools to handle the different aspects of the Scrum process rather than try forcing a fit of a single tool would is a bit like forcing a square peg into the round hole. In this way, providing you've agreed your common reference points, you can use several tools, each performing their role better than a could be done by a single component in a monolithic tool suite. Is this a more sensible approach? Are the two reference points I mentioned above suitable, or is their a better choice of points where the tools would meet? cheers,

  Read the article

• can you help me with 8068 project for Delphi .net please

  - by Lex Dean

  To find an Assembly programmer is very hard to help me I'm a established Delphi programmer that has an old copy of Delphi that is not .net And I have a *.dll that I'm converting into Delphi code for .net I'm on a big learning curve hear as i know little of .net yet. I've just got a computer with .net today!!!!!! I've run the *.dll through a dissembler and started putting jump links in as writing in Delphi assembly you do not do any addressing, just reference links. The file has fixed string structures (i think C++) ASCII & ANSI strings 1/ I do not know how to identify how the code references these structures 2/ and I do not know were the functions begin and what shape they look like The code is free for any one to look at their is not many functions in it. but I have to email it as stack over flow will not allow me to display it. Can you tech me or can you refer me to a friend you may know please to tech me lexdeanair at hotmail.com Best regards, Lex Dean from New Zealand I do not wish to pester any one

  Read the article

• Bluehost internal server error

  - by Aditya

  Hello everyone, When i am creating the setup of my rails application on bluehost,it throw following error:- Internal Server Error The server encountered an internal error or misconfiguration and was unable to complete your request. Please contact the server administrator, [email protected] and inform them of the time the error occurred, and anything you might have done that may have caused the error. More information about this error may be available in the server error log. Additionally, a 500 Internal Server Error error was encountered while trying to use an ErrorDocument to handle the request. Apache/2.2.14 (Unix) mod_ssl/2.2.14 OpenSSL/0.9.8l DAV/2 mod_auth_passthrough/2.1 FrontPage/5.0.2.2635 Server at team.cipher-tech.com Port 80 Please help me.It's urgent. Thanks in advance..

  Read the article

• IIS website is sending multiple content-type headers for zip files

  - by frankadelic

  We have a problem with an IIS5 server. When certain users/browsers click to download .zip files, binary gibberish text sometimes renders in the browser window. The desired behavior is for the file to either download or open with the associated zip application. Initially, we suspected that the wrong content-type header was set on the file. The IIS tech confirmed that .zip files were being served by IIS with the mime-type "application/x-zip-compressed". However, an inspection of the HTTP packets using Wireshark reveals that requests for zip files return two Content-Type headers. Content-Type: text/html; charset=UTF-8 Content-Type: application/x-zip-compressed Any idea why IIS is sending two content-type headers? This doesn't happen for regular HTML or images files. It does happen with ZIP and PDF. Is there a particular place we can ask the IIS tech to look? Or is there a configuration file we can examine?

  Read the article

• mysql fetch result parent id and category id by single query?

  - by Karthik

  I have the table and values like this, CREATE TABLE `category` ( `id` INT( 4 ) NOT NULL AUTO_INCREMENT PRIMARY KEY , `category` VARCHAR( 50 ) NOT NULL , `parent` INT( 4 ) NOT NULL ) INSERT INTO `category` VALUES (1, 'MCA', 9); INSERT INTO `category` VALUES (2, 'M Tech', 9); INSERT INTO `category` VALUES (3, 'B Tech', 9); INSERT INTO `category` VALUES (4, 'BioTech', 9); INSERT INTO `category` VALUES (5, 'InfoTech', 9); INSERT INTO `category` VALUES (6, 'Chemical', 10); INSERT INTO `category` VALUES (7, 'Indus', 10); INSERT INTO `category` VALUES (8, 'Physics', 10); INSERT INTO `category` VALUES (9, 'Information Science', 0); INSERT INTO `category` VALUES (10, 'Others Science', 0); I need a single query for getting the values in terms of category and subcategory. 3rd values zero as category and others are subcategory.

  Read the article

• My ASP.NET page is making postback on web server and not on local host

  - by Rizwan Aaqil

  I have created a website in ASP.NET = www.vif-tech.com/BidsOnline When I am running it on Localhost using Visual Studio 2008, its running perfectly without any postback because I am using Ajax Update Panels (where data is changing constantly). But when I am running from my web server i.e. www.vif-tech.com/BidsOnline, its making postbacks every seconds. Even I tried changing connection string on my localhost and tried connecting to main database (not on my localhost), it's still making postbacks. Is there some error in my DB or page ?

  Read the article

• fail2ban custom action to permanent ban IPs from China

  - by John Magnolia

  When a IP address gets banned how can I check if the banned IP address is from China. If yes, then add it to the permanent ban list. I have found this nice guide which write the banned IP to file. Reason: I am getting a lot of brute force attacks from China daily, thankfully fail2ban is helping restrict this although they appear to be getting worse and they are just changing their IP Address. Or even better would be if there was a maintained database of known hacker IP addresses. Example 1 Hi, The IP 60.169.78.77 has just been banned by Fail2Ban after 4 attempts against vsftpd. Here are more information about 60.169.78.77: % [whois.apnic.net node-7] % Whois data copyright terms http://www.apnic.net/db/dbcopyright.html inetnum: 60.166.0.0 - 60.175.255.255 netname: CHINANET-AH descr: CHINANET anhui province network descr: China Telecom descr: A12,Xin-Jie-Kou-Wai Street descr: Beijing 100088 country: CN admin-c: CH93-AP tech-c: JW89-AP mnt-by: APNIC-HM mnt-routes: MAINT-CHINANET-AH mnt-lower: MAINT-CHINANET-AH status: ALLOCATED PORTABLE changed: [email protected] 20040721 source: APNIC person: Chinanet Hostmaster nic-hdl: CH93-AP e-mail: [email protected] address: No.31 ,jingrong street,beijing address: 100032 phone: +86-10-58501724 fax-no: +86-10-58501724 country: CN changed: [email protected] 20070416 mnt-by: MAINT-CHINANET source: APNIC person: Jinneng Wang address: 17/F, Postal Building No.120 Changjiang address: Middle Road, Hefei, Anhui, China country: CN phone: +86-551-2659073 fax-no: +86-551-2659287 e-mail: [email protected] nic-hdl: JW89-AP mnt-by: MAINT-NEW changed: [email protected] 19990818 source: APNIC Regards, Fail2Ban Example 2 Hi, The IP 60.169.78.81 has just been banned by Fail2Ban after 4 attempts against vsftpd. Here are more information about 60.169.78.81: % [whois.apnic.net node-6] % Whois data copyright terms http://www.apnic.net/db/dbcopyright.html inetnum: 60.166.0.0 - 60.175.255.255 netname: CHINANET-AH descr: CHINANET anhui province network descr: China Telecom descr: A12,Xin-Jie-Kou-Wai Street descr: Beijing 100088 country: CN admin-c: CH93-AP tech-c: JW89-AP mnt-by: APNIC-HM mnt-routes: MAINT-CHINANET-AH mnt-lower: MAINT-CHINANET-AH status: ALLOCATED PORTABLE changed: [email protected] 20040721 source: APNIC person: Chinanet Hostmaster nic-hdl: CH93-AP e-mail: [email protected] address: No.31 ,jingrong street,beijing address: 100032 phone: +86-10-58501724 fax-no: +86-10-58501724 country: CN changed: [email protected] 20070416 mnt-by: MAINT-CHINANET source: APNIC person: Jinneng Wang address: 17/F, Postal Building No.120 Changjiang address: Middle Road, Hefei, Anhui, China country: CN phone: +86-551-2659073 fax-no: +86-551-2659287 e-mail: [email protected] nic-hdl: JW89-AP mnt-by: MAINT-NEW changed: [email protected] 19990818 source: APNIC Regards, Fail2Ban Example 3 Hi, The IP 222.133.244.99 has just been banned by Fail2Ban after 4 attempts against vsftpd. Here are more information about 222.133.244.99: % [whois.apnic.net node-6] % Whois data copyright terms http://www.apnic.net/db/dbcopyright.html inetnum: 222.133.244.96 - 222.133.244.127 netname: LCZFFHQ country: CN descr: liaochenggovermentfanghuoqiang admin-c: DS95-AP tech-c: DS95-AP status: ASSIGNED NON-PORTABLE changed: [email protected] 20060122 mnt-by: MAINT-CNCGROUP-SD source: APNIC route: 222.132.0.0/14 descr: CNC Group CHINA169 Shandong Province Network country: CN origin: AS4837 mnt-by: MAINT-CNCGROUP-RR changed: [email protected] 20060118 source: APNIC person: Data Communication Bureau Shandong nic-hdl: DS95-AP e-mail: [email protected] address: No.77 Jingsan Road,Jinan,Shandong,P.R.China phone: +86-531-6052611 fax-no: +86-531-6052414 country: CN changed: [email protected] 20050330 mnt-by: MAINT-CNCGROUP-SD source: APNIC Regards, Fail2Ban

  Read the article

• ASP.NET MVC ‘Extendable-hooks’ – ControllerActionInvoker class

  - by nmarun

  There’s a class ControllerActionInvoker in ASP.NET MVC. This can be used as one of an hook-points to allow customization of your application. Watching Brad Wilsons’ Advanced MP3 from MVC Conf inspired me to write about this class. What MSDN says: “Represents a class that is responsible for invoking the action methods of a controller.” Well if MSDN says it, I think I can instill a fair amount of confidence into what the class does. But just to get to the details, I also looked into the source code for MVC. Seems like the base class Controller is where an IActionInvoker is initialized: 1: protected virtual IActionInvoker CreateActionInvoker() { 2: return new ControllerActionInvoker(); 3: } In the ControllerActionInvoker (the O-O-B behavior), there are different ‘versions’ of InvokeActionMethod() method that actually call the action method in question and return an instance of type ActionResult. 1: protected virtual ActionResult InvokeActionMethod(ControllerContext controllerContext, ActionDescriptor actionDescriptor, IDictionary<string, object> parameters) { 2: object returnValue = actionDescriptor.Execute(controllerContext, parameters); 3: ActionResult result = CreateActionResult(controllerContext, actionDescriptor, returnValue); 4: return result; 5: } I guess that’s enough on the ‘behind-the-screens’ of this class. Let’s see how we can use this class to hook-up extensions. Say I have a requirement that the user should be able to get different renderings of the same output, like html, xml, json, csv and so on. The user will type-in the output format in the url and should the get result accordingly. For example: http://site.com/RenderAs/ – renders the default way (the razor view) http://site.com/RenderAs/xml http://site.com/RenderAs/csv … and so on where RenderAs is my controller. There are many ways of doing this and I’m using a custom ControllerActionInvoker class (even though this might not be the best way to accomplish this). For this, my one and only route in the Global.asax.cs is: 1: routes.MapRoute("RenderAsRoute", "RenderAs/{outputType}", 2: new {controller = "RenderAs", action = "Index", outputType = ""}); Here the controller name is ‘RenderAsController’ and the action that’ll get called (always) is the Index action. The outputType parameter will map to the type of output requested by the user (xml, csv…). I intend to display a list of food items for this example. 1: public class Item 2: { 3: public int Id { get; set; } 4: public string Name { get; set; } 5: public Cuisine Cuisine { get; set; } 6: } 7:  8: public class Cuisine 9: { 10: public int CuisineId { get; set; } 11: public string Name { get; set; } 12: } Coming to my ‘RenderAsController’ class. I generate an IList<Item> to represent my model. 1: private static IList<Item> GetItems() 2: { 3: Cuisine cuisine = new Cuisine { CuisineId = 1, Name = "Italian" }; 4: Item item = new Item { Id = 1, Name = "Lasagna", Cuisine = cuisine }; 5: IList<Item> items = new List<Item> { item }; 6: item = new Item {Id = 2, Name = "Pasta", Cuisine = cuisine}; 7: items.Add(item); 8: //... 9: return items; 10: } My action method looks like 1: public IList<Item> Index(string outputType) 2: { 3: return GetItems(); 4: } There are two things that stand out in this action method. The first and the most obvious one being that the return type is not of type ActionResult (or one of its derivatives). Instead I’m passing the type of the model itself (IList<Item> in this case). We’ll convert this to some type of an ActionResult in our custom controller action invoker class later. The second thing (a little subtle) is that I’m not doing anything with the outputType value that is passed on to this action method. This value will be in the RouteData dictionary and we’ll use this in our custom invoker class as well. It’s time to hook up our invoker class. First, I’ll override the Initialize() method of my RenderAsController class. 1: protected override void Initialize(RequestContext requestContext) 2: { 3: base.Initialize(requestContext); 4: string outputType = string.Empty; 5:  6: // read the outputType from the RouteData dictionary 7: if (requestContext.RouteData.Values["outputType"] != null) 8: { 9: outputType = requestContext.RouteData.Values["outputType"].ToString(); 10: } 11:  12: // my custom invoker class 13: ActionInvoker = new ContentRendererActionInvoker(outputType); 14: } Coming to the main part of the discussion – the ContentRendererActionInvoker class: 1: public class ContentRendererActionInvoker : ControllerActionInvoker 2: { 3: private readonly string _outputType; 4:  5: public ContentRendererActionInvoker(string outputType) 6: { 7: _outputType = outputType.ToLower(); 8: } 9: //... 10: } So the outputType value that was read from the RouteData, which was passed in from the url, is being set here in  a private field. Moving to the crux of this article, I now override the CreateActionResult method. 1: protected override ActionResult CreateActionResult(ControllerContext controllerContext, ActionDescriptor actionDescriptor, object actionReturnValue) 2: { 3: if (actionReturnValue == null) 4: return new EmptyResult(); 5:  6: ActionResult result = actionReturnValue as ActionResult; 7: if (result != null) 8: return result; 9:  10: // This is where the magic happens 11: // Depending on the value in the _outputType field, 12: // return an appropriate ActionResult 13: switch (_outputType) 14: { 15: case "json": 16: { 17: JavaScriptSerializer serializer = new JavaScriptSerializer(); 18: string json = serializer.Serialize(actionReturnValue); 19: return new ContentResult { Content = json, ContentType = "application/json" }; 20: } 21: case "xml": 22: { 23: XmlSerializer serializer = new XmlSerializer(actionReturnValue.GetType()); 24: using (StringWriter writer = new StringWriter()) 25: { 26: serializer.Serialize(writer, actionReturnValue); 27: return new ContentResult { Content = writer.ToString(), ContentType = "text/xml" }; 28: } 29: } 30: case "csv": 31: controllerContext.HttpContext.Response.AddHeader("Content-Disposition", "attachment; filename=items.csv"); 32: return new ContentResult 33: { 34: Content = ToCsv(actionReturnValue as IList<Item>), 35: ContentType = "application/ms-excel" 36: }; 37: case "pdf": 38: string filePath = controllerContext.HttpContext.Server.MapPath("~/items.pdf"); 39: controllerContext.HttpContext.Response.AddHeader("content-disposition", 40: "attachment; filename=items.pdf"); 41: ToPdf(actionReturnValue as IList<Item>, filePath); 42: return new FileContentResult(StreamFile(filePath), "application/pdf"); 43:  44: default: 45: controllerContext.Controller.ViewData.Model = actionReturnValue; 46: return new ViewResult 47: { 48: TempData = controllerContext.Controller.TempData, 49: ViewData = controllerContext.Controller.ViewData 50: }; 51: } 52: } A big method there! The hook I was talking about kinda above actually is here. This is where different kinds / formats of output get returned based on the output type requested in the url. When the _outputType is not set (string.Empty as set in the Global.asax.cs file), the razor view gets rendered (lines 45-50). This is the default behavior in most MVC applications where-in a view (webform/razor) gets rendered on the browser. As you see here, this gets returned as a ViewResult. But then, for an outputType of json/xml/csv, a ContentResult gets returned, while for pdf, a FileContentResult is returned. Here are how the different kinds of output look like: This is how we can leverage this feature of ASP.NET MVC to developer a better application. I’ve used the iTextSharp library to convert to a pdf format. Mike gives quite a bit of detail regarding this library here. You can download the sample code here. (You’ll get an option to download once you open the link). Verdict: Hot chocolate: $3; Reebok shoes: $50; Your first car: $3000; Being able to extend a web application: Priceless.

  Read the article

• Commit in SQL

  - by PRajkumar

  SQL Transaction Control Language Commands (TCL)                                           (COMMIT) Commit Transaction As a SQL language we use transaction control language very frequently. Committing a transaction means making permanent the changes performed by the SQL statements within the transaction. A transaction is a sequence of SQL statements that Oracle Database treats as a single unit. This statement also erases all save points in the transaction and releases transaction locks. Oracle Database issues an implicit COMMIT before and after any data definition language (DDL) statement. Oracle recommends that you explicitly end every transaction in your application programs with a COMMIT or ROLLBACK statement, including the last transaction, before disconnecting from Oracle Database. If you do not explicitly commit the transaction and the program terminates abnormally, then the last uncommitted transaction is automatically rolled back.   Until you commit a transaction: ·         You can see any changes you have made during the transaction by querying the modified tables, but other users cannot see the changes. After you commit the transaction, the changes are visible to other users' statements that execute after the commit ·         You can roll back (undo) any changes made during the transaction with the ROLLBACK statement   Note: Most of the people think that when we type commit data or changes of what you have made has been written to data files, but this is wrong when you type commit it means that you are saying that your job has been completed and respective verification will be done by oracle engine that means it checks whether your transaction achieved consistency when it finds ok it sends a commit message to the user from log buffer but not from data buffer, so after writing data in log buffer it insists data buffer to write data in to data files, this is how it works.   Before a transaction that modifies data is committed, the following has occurred: ·         Oracle has generated undo information. The undo information contains the old data values changed by the SQL statements of the transaction ·         Oracle has generated redo log entries in the redo log buffer of the System Global Area (SGA). The redo log record contains the change to the data block and the change to the rollback block. These changes may go to disk before a transaction is committed ·         The changes have been made to the database buffers of the SGA. These changes may go to disk before a transaction is committed   Note:   The data changes for a committed transaction, stored in the database buffers of the SGA, are not necessarily written immediately to the data files by the database writer (DBWn) background process. This writing takes place when it is most efficient for the database to do so. It can happen before the transaction commits or, alternatively, it can happen some times after the transaction commits.   When a transaction is committed, the following occurs: 1.      The internal transaction table for the associated undo table space records that the transaction has committed, and the corresponding unique system change number (SCN) of the transaction is assigned and recorded in the table 2.      The log writer process (LGWR) writes redo log entries in the SGA's redo log buffers to the redo log file. It also writes the transaction's SCN to the redo log file. This atomic event constitutes the commit of the transaction 3.      Oracle releases locks held on rows and tables 4.      Oracle marks the transaction complete   Note:   The default behavior is for LGWR to write redo to the online redo log files synchronously and for transactions to wait for the redo to go to disk before returning a commit to the user. However, for lower transaction commit latency application developers can specify that redo be written asynchronously and that transaction do not need to wait for the redo to be on disk.   The syntax of Commit Statement is   COMMIT [WORK] [COMMENT ‘your comment’]; ·         WORK is optional. The WORK keyword is supported for compliance with standard SQL. The statements COMMIT and COMMIT WORK are equivalent. Examples Committing an Insert INSERT INTO table_name VALUES (val1, val2); COMMIT WORK; ·         COMMENT Comment is also optional. This clause is supported for backward compatibility. Oracle recommends that you used named transactions instead of commit comments. Specify a comment to be associated with the current transaction. The 'text' is a quoted literal of up to 255 bytes that Oracle Database stores in the data dictionary view DBA_2PC_PENDING along with the transaction ID if a distributed transaction becomes in doubt. This comment can help you diagnose the failure of a distributed transaction. Examples The following statement commits the current transaction and associates a comment with it: COMMIT     COMMENT 'In-doubt transaction Code 36, Call (415) 555-2637'; ·         WRITE Clause Use this clause to specify the priority with which the redo information generated by the commit operation is written to the redo log. This clause can improve performance by reducing latency, thus eliminating the wait for an I/O to the redo log. Use this clause to improve response time in environments with stringent response time requirements where the following conditions apply: The volume of update transactions is large, requiring that the redo log be written to disk frequently. The application can tolerate the loss of an asynchronously committed transaction. The latency contributed by waiting for the redo log write to occur contributes significantly to overall response time. You can specify the WAIT | NOWAIT and IMMEDIATE | BATCH clauses in any order. Examples To commit the same insert operation and instruct the database to buffer the change to the redo log, without initiating disk I/O, use the following COMMIT statement: COMMIT WRITE BATCH; Note: If you omit this clause, then the behavior of the commit operation is controlled by the COMMIT_WRITE initialization parameter, if it has been set. The default value of the parameter is the same as the default for this clause. Therefore, if the parameter has not been set and you omit this clause, then commit records are written to disk before control is returned to the user. WAIT | NOWAIT Use these clauses to specify when control returns to the user. The WAIT parameter ensures that the commit will return only after the corresponding redo is persistent in the online redo log. Whether in BATCH or IMMEDIATE mode, when the client receives a successful return from this COMMIT statement, the transaction has been committed to durable media. A crash occurring after a successful write to the log can prevent the success message from returning to the client. In this case the client cannot tell whether or not the transaction committed. The NOWAIT parameter causes the commit to return to the client whether or not the write to the redo log has completed. This behavior can increase transaction throughput. With the WAIT parameter, if the commit message is received, then you can be sure that no data has been lost. Caution: With NOWAIT, a crash occurring after the commit message is received, but before the redo log record(s) are written, can falsely indicate to a transaction that its changes are persistent. If you omit this clause, then the transaction commits with the WAIT behavior. IMMEDIATE | BATCH Use these clauses to specify when the redo is written to the log. The IMMEDIATE parameter causes the log writer process (LGWR) to write the transaction's redo information to the log. This operation option forces a disk I/O, so it can reduce transaction throughput. The BATCH parameter causes the redo to be buffered to the redo log, along with other concurrently executing transactions. When sufficient redo information is collected, a disk write of the redo log is initiated. This behavior is called "group commit", as redo for multiple transactions is written to the log in a single I/O operation. If you omit this clause, then the transaction commits with the IMMEDIATE behavior. ·         FORCE Clause Use this clause to manually commit an in-doubt distributed transaction or a corrupt transaction. ·         In a distributed database system, the FORCE string [, integer] clause lets you manually commit an in-doubt distributed transaction. The transaction is identified by the 'string' containing its local or global transaction ID. To find the IDs of such transactions, query the data dictionary view DBA_2PC_PENDING. You can use integer to specifically assign the transaction a system change number (SCN). If you omit integer, then the transaction is committed using the current SCN. ·         The FORCE CORRUPT_XID 'string' clause lets you manually commit a single corrupt transaction, where string is the ID of the corrupt transaction. Query the V$CORRUPT_XID_LIST data dictionary view to find the transaction IDs of corrupt transactions. You must have DBA privileges to view the V$CORRUPT_XID_LIST and to specify this clause. ·         Specify FORCE CORRUPT_XID_ALL to manually commit all corrupt transactions. You must have DBA privileges to specify this clause. Examples Forcing an in doubt transaction. Example The following statement manually commits a hypothetical in-doubt distributed transaction. Query the V$CORRUPT_XID_LIST data dictionary view to find the transaction IDs of corrupt transactions. You must have DBA privileges to view the V$CORRUPT_XID_LIST and to issue this statement. COMMIT FORCE '22.57.53';

  Read the article

• CodePlex Daily Summary for Tuesday, April 03, 2012

  CodePlex Daily Summary for Tuesday, April 03, 2012Popular ReleasesWiX Toolset: WiX v3.6 RC0: WiX v3.6 RC0 (3.6.2803.0) provides support for VS11 and a more stable Burn engine. For more information see Rob's blog post about the release: http://robmensching.com/blog/posts/2012/4/3/WiX-v3.6-Release-Candidate-Zero-availableSageFrame: SageFrame 2.0: Sageframe is an open source ASP.NET web development framework developed using ASP.NET 3.5 with service pack 1 (sp1) technology. It is designed specifically to help developers build dynamic website by providing core functionality common to most web applications.Lightbox Gallery Module for DotNetNuke: 01.11.00: This version of the Lightbox Gallery Module adds the following features/bug fixes: Feature: Read image EXIF information Bug Fix: URL parsing bug for any folder provider Minimum System Requirements Please ensure that your environment meets or exceeds the following system requirements: DotNetNuke® Version 06.00.00 or higher SQL Server 2005 or later .Net Framework 3.5 SP1 or laterClosedXML - The easy way to OpenXML: ClosedXML 0.65.0: Aside from many bug fixes we now have Conditional Formatting The conditional formatting was sponsored by http://www.bewing.nl (big thanks)callisto: callisto 2.0.24: Implemented ares encryption protocol for supported clients. Also changed script loading method to read direct from source files.sb0t: sb0t 4.61: Added packet encryption protocol for supported clients.iTuner - The iTunes Companion: iTuner 1.5.4475: Fix to parse empty playlists in iTunes LibraryExtAspNet: ExtAspNet v3.1.1: ExtAspNet - ?? ExtJS ??? ASP.NET 2.0 ???，????? AJAX ?????????? ExtAspNet ????? ExtJS ??? ASP.NET 2.0 ???，????? AJAX ??????????。 ExtAspNet ??????? JavaScript，?? CSS，?? UpdatePanel，?? ViewState，?? WebServices ???????。 ??????: IE 7.0, Firefox 3.6, Chrome 3.0, Opera 10.5, Safari 3.0+ ????：Apache License 2.0 (Apache) ??：http://extasp.net/ ??：http://bbs.extasp.net/ ??：http://extaspnet.codeplex.com/ ??：http://sanshi.cnblogs.com/ ????： +2012-04-02 v3.1.1 +????????，?????????????，????????????（...Document.Editor: 2012.2: Whats New for Document.Editor 2012.2: New Save Copy support New Page Setup support Minor Bug Fix's, improvements and speed upsVidCoder: 1.3.2: Added option for the minimum title length to scan. Added support to enable or disable LibDVDNav. Added option to prompt to delete source files after clearing successful completed items. Added option to disable remembering recent files and folders. Tweaked number box to only select all on a quick click.MJP's DirectX 11 Samples: Light Indexed Deferred Rendering: Implements light indexed deferred using per-tile light lists calculated in a compute shader, as well as a traditional deferred renderer that uses a compute shader for per-tile light culling and per-pixel shading.Pcap.Net: Pcap.Net 0.9.0 (66492): Pcap.Net - March 2012 Release Pcap.Net is a .NET wrapper for WinPcap written in C++/CLI and C#. It Features almost all WinPcap features and includes a packet interpretation framework. Version 0.9.0 (Change Set 66492)March 31, 2012 release of the Pcap.Net framework. Follow Pcap.Net on Google+Follow Pcap.Net on Google+ Files Pcap.Net.DevelopersPack.0.9.0.66492.zip - Includes all the tutorial example projects source files, the binaries in a 3rdParty directory and the documentation. It include...Extended WPF Toolkit: Extended WPF Toolkit - 1.6.0: Want an easier way to install the Extended WPF Toolkit?The Extended WPF Toolkit is available on Nuget. What's in the 1.6.0 Release?BusyIndicator ButtonSpinner Calculator CalculatorUpDown CheckListBox - Breaking Changes CheckComboBox - New Control ChildWindow CollectionEditor CollectionEditorDialog ColorCanvas ColorPicker DateTimePicker DateTimeUpDown DecimalUpDown DoubleUpDown DropDownButton IntegerUpDown Magnifier MaskedTextBox MessageBox MultiLineTex...Media Companion: MC 3.434b Release: General This release should be the last beta for 3.4xx. If there are no major problems, by the end of the week it will upgraded to 3.500 Stable! The latest mc_com.exe should be included too! TV Bug fix - crash when using XBMC scraper for TV episodes. Bug fix - episode count update when adding new episodes. Bug fix - crash when actors name was missing. Enhanced TV scrape progress text. Enhancements made to missing episodes display. Movies Bug fix - hide "Play Trailer" when multisaev...Better Explorer: Better Explorer 2.0.0.831 Alpha: - A new release with: - many bugfixes - changed icon - added code for more failsafe registry usage on x64 systems - not needed regfix anymore - added ribbon shortcut keys - Other fixes Note: If you have problems opening system libraries, a suggestion was given to copy all of these libraries and then delete the originals. Thanks to Gaugamela for that! (see discussion here: 349015 ) Note2: I was upload again the setup due to missing file!MonoGame - Write Once, Play Everywhere: MonoGame 2.5: The MonoGame team are pleased to announce that MonoGame v2.5 has been released. This release contains important bug fixes, implements optimisations and adds key features. MonoGame now has the capability to use OpenGLES 2.0 on Android and iOS devices, meaning it now supports custom shaders across mobile and desktop platforms. Also included in this release are native orientation animations on iOS devices and better Orientation support for Android. There have also been a lot of bug fixes since t...Circuit Diagram: Circuit Diagram 2.0 Alpha 3: New in this release: Added components: Microcontroller Demultiplexer Flip & rotate components Open XML files from older versions of Circuit Diagram Text formatting for components New CDDX syntax Other fixesUmbraco CMS: Umbraco 5.1 CMS (Beta): Beta build for testing - please report issues at issues.umbraco.org (Latest uploaded: 5.1.0.123) What's new in 5.1? The full list of changes is on our http://progress.umbraco.org task tracking page. It shows items complete for 5.1, and 5.1 includes items for 5.0.1 and 5.0.2 listed there too. Here's two headline acts: Members5.1 adds support for backoffice editing of Members. We support the pairing up of our content type system in Hive with regular ASP.NET Membership providers (we ship a def...51Degrees.mobi - Mobile Device Detection and Redirection: 2.1.2.11: One Click Install from NuGet Changes to Version 2.1.2.11Code Changes 1. The project is now licenced under the Mozilla Public Licence 2. 2. User interface control and associated data access layer classes have been added to aid developers integrating 51Degrees.mobi into wider projects such as content management systems or web hosting management solutions. Use the following in a web form or user control to access these new UI components. <%@ Register Assembly="FiftyOne.Foundation" Namespace="...ScintillaNET: ScintillaNET 2.5: A slew of bug-fixes with a few new features sprinkled in. This release also upgrades the SciLexer and SciLexer64 DLLs to version 3.0.4. The official stuff: Issue # Title 32402 32402 27137 27137 31548 31548 30179 30179 24932 24932 29701 29701 31238 31238 26875 26875 30052 30052 New Projects3DTweet: 3Dtweet is an effort to make tweets appear in a aesthetic manner to the users of windows phone.Its developed using VS2010 expresss.Alay Plugin for Windows Live Writer: a project for creating an alay languageAuthor-it Copy Folder Plug-in: The Copy Folder Plug-in is an Author-it plug-in that allows the user to create a duplicate of a folder and its contents, including subfolders and objects.Author-it Dependencies Plug-in: The Word Count Plug-in is an Author-it plug-in that allows the user to drill down into object relationships to find objects that selected Author-it objects depend on.Author-it Word Count Plug-in: The Word Count Plug-in is an Author-it plug-in that allows the user to get word counts for selected topics.Azure Configuration File Comparer: Compares two Azure configuration files and highlights the differencesBootstrap Footer Sticker: Bootstrap extensions for footer to stick at the bottomBulk Approval Webpart: This webpart can be added to any list, or document library that requires approval. When the button is clicked it will approve all items. It will also kick start any workflows attached to the list / library that are set to start when an item has been changed. CodeTimer: Code Execute TimeCRM 2011 - WinForm based User Settings Console: This is Windows Form based Utility to do bulk management of User Settings in CRM 2011Emergency System: An Imagine Cup projectFalafel Solution Rename Script: The Falafel Software Solution Rename PowerShell Script makes it easy to reuse an existing solution/project by performing a global rename. If you have a solution named ExampleSolution and want to reuse it as WidgetSolution, this script will rename everything for you.Gadgeteer Bluetooth Module: BETA Drivers for the .NET Gadgeteer Bluetooth modulesGreg's Channel 9 Utilities and Helpers: Utilities and helpers for Microsoft's Channel 9 (C9) site. These are utilities I've created to make my C9 work faster and easierHB's First Time: My first project hereHOMMFrame: Studying project about frames.ICNInformaticaCenter: * ICNInformaticaCenter *Insert a Favorite (Bookmark) plugin for Windows Live Writer: This Windows Live Writer plugin allows you to select a Favorite (Bookmark) and insert it into your blog entry.Kinect your Metro Style App: The main idea is to tell Metro Style App communicate with external environment via Kinect Sensor.Memo: Memo Intellegence SystemMGR.CommandLineParser: MGR.CommandLineParser is a multi-command line parser. It uses System.ComponentModel.DataAnnotations to declare and validate the commands.MusicStoreMVC3: ?????MVC3??????????，????????（???????）??? 1.EF4.1 2.MVC3 3.MvcPager 4.Linq ?????? NN Crew Calculator: Calculator project to help learn C#Reporte Ciudadano: Aplicación para que los ciudadanos reporten los problemas al ayuntamiento.Sejrssedler: This is a school project made, by four student in Aarhus, Denmark. During the Datamatiker study(2nd year).smartcamera: smart cameraSpecEx: Speculative ExecutionStructure Copier: This small program is supposed to copy tree structure of directory.TFS2010 Service Provider: Web Service (asmx) is a provider of Team Foundation Server 2010 object model. Was developed to enable the implementation of client application for Android and etc. platforms, which receives data from the server via Web services.totalem: totalem - free file manager for WindowsWebSharperWithTypeProviders: WebSharper project with Visual Studio 2011 Beta, .Net 4.5 and F# 3.0 with TypeProviders

  Read the article

• ASMX Web Services with SOAP Extension

  - by digitall

  I am in the process of setting up a web service for an external client to connect to my client's application and update some information. I went the ASMX route (the rest of the application runs on WCF) because I knew the external client could be very difficult to deal with and I was trying to keep everything as simple as possible. They also aren't a .Net shop which makes things worse. After getting the service setup for them I provided the ASMX URL for them to see how to format the SOAP headers/message content. They have since come back and told me their tool is unable to send them in the format required by .Net and I can either come up with a different way to accept messages or we have to go with FTP. Based on this I have been researching how to intercept their message, reformat it the way my service requires it (which means adding two lines), and then let it process. This path led me to SOAP Extensions which I have been trying to work with but can't seem to figure out. When I have my sample application call the web service from the generated code Add Web Reference provides everything works great until I add in my extension. All it currently does is override ChainStream setting an internal stream equal to the one being passed in and returning a new stream, like this: private Stream newStream = null; private Stream oldStream = null; public override Stream ChainStream(Stream stream) { this.oldStream = stream; this.newStream = new MemoryStream(); return newStream; } I also override ProcessMessage and in it take the contents of oldStream and set newStream equal to that and then write to a different stream with an XmlWriter. I take that new stream and using a StreamReader read it into a string, with the end goal being manipulating it here and setting newStream (which is being used by ChainStream) equal to the contents of this. Here is that piece: public override void ProcessMessage(SoapMessage message) { switch (message.Stage) { case SoapMessageStage.BeforeDeserialize: this.Process(); break; default: break; } } private void Process() { this.newStream.Position = 0L; XmlTextReader reader = new XmlTextReader(this.oldStream); MemoryStream outStream = new MemoryStream(); using (XmlWriter writer = XmlWriter.Create(outStream)) { do { writer.WriteNode(reader, true); } while (reader.Read()); writer.Flush(); } outStream.Seek(0, SeekOrigin.Begin); StreamReader streamReader = new StreamReader(outStream); string message = streamReader.ReadToEnd(); newStream = outStream; newStream.Seek(0, SeekOrigin.Begin); streamReader.Close(); } By running this, which seems to me like it would be fine, my test application gets a 400 Bad Request back from the service. If I either don't use the extension or I don't do anything in ProcessMessage everything seems fine. Any suggestions to this? As a side note, once I get this working with the generated code from the WSDL I will be moving to a WebRequest to try sending the message to the service. Currently that bombs out with a 415 Unsupported Media Type response. I'm trying to keep this post to one question but if anyone has any tips with using a WebRequest to connect to an ASMX service it would be much appreciated!

  Read the article

• getting base64 content string of an image from a mimepart in Java

  - by Bas van den Broek

  Hello, I am trying to get the base64 content of a MimePart in a MimeMultiPart, but I'm struggling with the Javamail package. I simply want the base64 encoded String of a certain inline image, there doesn't seem to be an easy way to do this though. I wrote a method that will take the mime content (as a string) and an image name as a parameter, and searches for the part that contains the base64 content of that image name, and in the end returns this base64 string (as well as the content type but that is irrelevant for this question) Here is the relevant code: private static String[] getBase64Content(String imageName, String mimeString) throws MessagingException, IOException { System.out.println("image name: " + imageName + "\n\n"); System.out.println("mime string: " + mimeString); String[] base64Content = new String[2]; base64Content[0] = ""; base64Content[1] = "image/jpeg"; //some default value DataSource source = new ByteArrayDataSource(new ByteArrayInputStream(mimeString.getBytes()), "multipart/mixed"); MimeMultipart mp = new MimeMultipart(source); for (int i = 0; i < mp.getCount(); i++) { MimePart part = (MimePart) mp.getBodyPart(i); String disposition = part.getDisposition(); if (disposition != null && disposition.equals(Part.INLINE)) { if (part.getContentID() != null && part.getContentID().indexOf(imageName) > -1) //check if this is the right part { if (part.getContent() instanceof BASE64DecoderStream) { BASE64DecoderStream base64DecoderStream = (BASE64DecoderStream) part.getContent(); StringWriter writer = new StringWriter(); IOUtils.copy(base64DecoderStream, writer); String base64decodedString = writer.toString(); byte[] encodedMimeByteArray = Base64.encodeBase64(base64decodedString.getBytes()); String encodedMimeString = new String(encodedMimeByteArray); System.out.println("encoded mime string: " + encodedMimeString); base64Content[0] = encodedMimeString; base64Content[1] = getContentTypeString(part); } } } } return base64Content; } I cannot paste all of the output as the post would be too long, but this is some of it: image name: [email protected] This is a part of the mimeString input, it does find this (correct) part with the image name: --_004_225726A14AF9134CB538EE7BD44373A04D9E3F3940menexch2007ex_ Content-Type: image/gif; name="image001.gif" Content-Description: image001.gif Content-Disposition: inline; filename="image001.gif"; size=1070; creation-date="Fri, 02 Apr 2010 16:19:43 GMT"; modification-date="Fri, 02 Apr 2010 16:19:43 GMT" Content-ID: <[email protected]> Content-Transfer-Encoding: base64 R0lGODlhEAAQAPcAABxuHJzSlDymHGy2XHTKbITCdNTu1FyqTHTCXJTKhLTarCSKHEy2JHy6bJza lITKfFzCPEyWPHS+XHzCbJzSjFS+NLTirBx6HHzKdOz27GzCZJTOjCyWHKzWpHy2ZJTGhHS+VLzi (more base64 string here that I'm not going to paste) But when it finally prints the encoded mime string, this is a different string than I was expecting: encoded mime string: R0lGODlhEAAQAO+/vQAAHG4c77+90pQ877+9HGzvv71cdO+/vWzvv73vv71077+977+977+9XO+/vUx077+9XO+/vcqE77+92qwk77+9HEzvv70kfO+/vWzvv73alO+ Clearly different from the one that has its output in the part above. I'm not even sure what I'm looking at here, but when I try to load this as an image in a html page, it won't work. This is fairly frustrating for me, since all I want is a piece of the text that I'm already printing, but I'd rather not have to search through the mime string myself for the correct part, introducing all kinds of bugs.So I'd really prefer to use the Javamail library but could use some help on how to actually get that correct mime string.

  Read the article

• [Grails] How to enlist children of specified Parent in treeview colum (table)

  - by Rehman

  I am newbie in grails and tried to implement treeview using RichUI plugin, which shows all parents with individual children in Parent.list.gsp xml for parent and their children <parents name='Parents'> <Parent id='1' name='Parent_1'> <Children name='Children'> <child name='Child_2' id='2' /> <child name='Child_4' id='4' /> <child name='Child_1' id='3' /> <child name='Child_3' id='1' /> </Children> </Parent> <Parent id='2' name='Parent_2'> <Children name='Children'> <child name='Child_1' id='8' /> <child name='Child_2' id='7' /> <child name='Child_4' id='6' /> <child name='Child_3' id='5' /> </Children> </Parent> </parents> Parent Domain Class class Parent { String name static hasMany = [children:Child] } Child Domain Class class Child { String name Parent parent static belongsTo = [parent:Parent] } Parent Controller def list = { def writer = new StringWriter() def xml = new MarkupBuilder(writer) xml.parents(name: "Parents"){ Parent.list().each { Parent parentt = it Parent( id:parentt.id,name:parentt.name) { Children(name:'Children'){ parentt.children.each { Child childd = it child(name:childd.name,id:childd.id) } } } } } if(!params.max)params.max=10 ["data":writer.toString(),parentInstanceList: Parent.list(params), parentInstanceTotal: Parent.count()] } Parent.list.gsp <head> <resource:treeView/> ...</head> <body> <table> <thead> <tr> <g:sortableColumn property="id" title="${message(code: 'parent.id.label', default: 'Id')}" /> <g:sortableColumn property="name" title="${message(code: 'parent.name.label', default: 'Name')}" /> <g:sortableColumn property="relationship" title="${message(code: 'parent.relationhsip.label', default: 'Relationship')}" /> </tr> </thead> <tbody> <g:each in="${parentInstanceList}" status="i" var="parentInstance"> <tr class="${(i % 2) == 0 ? 'odd' : 'even'}"> <td><g:link action="show" id="${parentInstance.id}">${fieldValue(bean: parentInstance, field: "id")}</g:link></td> <td>${fieldValue(bean: parentInstance, field: "name")}</td> <td><richui:treeView xml="${data}" /></td> </tr> </g:each> </tbody> </table> </body> Problem Currently, in list view, every Parent entry has list of all parents and their children under relationship column Parent List view Snapshot link text Question how can i enlist all children only for each parent instead of enlisting all parents with their children in each Parent entry ? thanks in advance Rehman

  Read the article

• java ioexception error=24 too many files open

  - by MattS

  I'm writing a genetic algorithm that needs to read/write lots of files. The fitness test for the GA is invoking a program called gradif, which takes a file as input and produces a file as output. Everything is working except when I make the population size and/or the total number of generations of the genetic algorithm too large. Then, after so many generations, I start getting this: java.io.FileNotFoundException: testfiles/GradifOut29 (Too many open files). (I get it repeatedly for many different files, the index 29 was just the one that came up first last time I ran it). It's strange because I'm not getting the error after the first or second generation, but after a significant amount of generations, which would suggest that each generation opens up more files that it doesn't close. But as far as I can tell I'm closing all of the files. The way the code is set up is the main() function is in the Population class, and the Population class contains an array of Individuals. Here's my code: Initial creation of input files (they're random access so that I could reuse the same file across multiple generations) files = new RandomAccessFile[popSize]; for(int i=0; i<popSize; i++){ files[i] = new RandomAccessFile("testfiles/GradifIn"+i, "rw"); } At the end of the entire program: for(int i=0; i<individuals.length; i++){ files[i].close(); } Inside the Individual's fitness test: FileInputStream fin = new FileInputStream("testfiles/GradifIn"+index); FileOutputStream fout = new FileOutputStream("testfiles/GradifOut"+index); Process process = Runtime.getRuntime().exec ("./gradif"); OutputStream stdin = process.getOutputStream(); InputStream stdout = process.getInputStream(); Then, later.... try{ fin.close(); fout.close(); stdin.close(); stdout.close(); process.getErrorStream().close(); }catch (IOException ioe){ ioe.printStackTrace(); } Then, afterwards, I append an 'END' to the files to make parsing them easier. FileWriter writer = new FileWriter("testfiles/GradifOut"+index, true); writer.write("END"); try{ writer.close(); }catch(IOException ioe){ ioe.printStackTrace(); } My redirection of stdin and stdout for gradif are from this answer. I tried using the try{close()}catch{} syntax to see if there was a problem with closing any of the files (there wasn't), and I got that from this answer. It should also be noted that the Individuals' fitness tests run concurrently. UPDATE: I've actually been able to narrow it down to the exec() call. In my most recent run, I first ran in to trouble at generation 733 (with a population size of 100). Why are the earlier generations fine? I don't understand why, if there's no leaking, the algorithm should be able to pass earlier generations but fail on later generations. And if there is leaking, then where is it coming from? UPDATE2: In trying to figure out what's going on here, I would like to be able to see (preferably in real-time) how many files the JVM has open at any given point. Is there an easy way to do that?

  Read the article

• How to Correct & Improve the Design of this Code?

  - by DaveDev

  HI Guys, I've been working on a little experiement to see if I could create a helper method to serialize any of my types to any type of HTML tag I specify. I'm getting a NullReferenceException when _writer = _viewContext.Writer; is called in protected virtual void Dispose(bool disposing) {/*...*/} I think I'm at a point where it almost works (I've gotten other implementations to work) and I was wondering if somebody could point out what I'm doing wrong? Also, I'd be interested in hearing suggestions on how I could improve the design? So basically, I have this code that will generate a Select box with a number of options: // the idea is I can use one method to create any complete tag of any type // and put whatever I want in the content area <% using (Html.GenerateTag<SelectTag>(Model, new { href = Url.Action("ActionName") })) { %> <%foreach (var fund in Model.Funds) {%> <% using (Html.GenerateTag<OptionTag>(fund)) { %> <%= fund.Name %> <% } %> <% } %> <% } %> This Html.GenerateTag helper is defined as: public static MMTag GenerateTag<T>(this HtmlHelper htmlHelper, object elementData, object attributes) where T : MMTag { return (T)Activator.CreateInstance(typeof(T), htmlHelper.ViewContext, elementData, attributes); } Depending on the type of T it'll create one of the types defined below, public class HtmlTypeBase : MMTag { public HtmlTypeBase() { } public HtmlTypeBase(ViewContext viewContext, params object[] elementData) { base._viewContext = viewContext; base.MergeDataToTag(viewContext, elementData); } } public class SelectTag : HtmlTypeBase { public SelectTag(ViewContext viewContext, params object[] elementData) { base._tag = new TagBuilder("select"); //base.MergeDataToTag(viewContext, elementData); } } public class OptionTag : HtmlTypeBase { public OptionTag(ViewContext viewContext, params object[] elementData) { base._tag = new TagBuilder("option"); //base.MergeDataToTag(viewContext, _elementData); } } public class AnchorTag : HtmlTypeBase { public AnchorTag(ViewContext viewContext, params object[] elementData) { base._tag = new TagBuilder("a"); //base.MergeDataToTag(viewContext, elementData); } } all of these types (anchor, select, option) inherit from HtmlTypeBase, which is intended to perform base.MergeDataToTag(viewContext, elementData);. This doesn't happen though. It works if I uncomment the MergeDataToTag methods in the derived classes, but I don't want to repeat that same code for every derived class I create. This is the definition for MMTag: public class MMTag : IDisposable { internal bool _disposed; internal ViewContext _viewContext; internal TextWriter _writer; internal TagBuilder _tag; internal object[] _elementData; public MMTag() {} public MMTag(ViewContext viewContext, params object[] elementData) { } public void Dispose() { Dispose(true /* disposing */); GC.SuppressFinalize(this); } protected virtual void Dispose(bool disposing) { if (!_disposed) { _disposed = true; _writer = _viewContext.Writer; _writer.Write(_tag.ToString(TagRenderMode.EndTag)); } } protected void MergeDataToTag(ViewContext viewContext, object[] elementData) { Type elementDataType = elementData[0].GetType(); foreach (PropertyInfo prop in elementDataType.GetProperties()) { if (prop.PropertyType.IsPrimitive || prop.PropertyType == typeof(Decimal) || prop.PropertyType == typeof(String)) { object propValue = prop.GetValue(elementData[0], null); string stringValue = propValue != null ? propValue.ToString() : String.Empty; _tag.Attributes.Add(prop.Name, stringValue); } } var dic = new Dictionary<string, object>(StringComparer.OrdinalIgnoreCase); var attributes = elementData[1]; if (attributes != null) { foreach (PropertyDescriptor descriptor in TypeDescriptor.GetProperties(attributes)) { object value = descriptor.GetValue(attributes); dic.Add(descriptor.Name, value); } } _tag.MergeAttributes<string, object>(dic); _viewContext = viewContext; _viewContext.Writer.Write(_tag.ToString(TagRenderMode.StartTag)); } } Thanks Dave

  Read the article

• save as .txt format

  - by user1180492

  I made a NotePad program. The problem is it doesn't save in .txt format, It save as a file with no format. But it can open .txt files. How can i fix it? Here is my work. import javax.swing.*; import java.awt.*; import java.awt.event.*; import java.util.Scanner; import java.io.*; public class NotePad extends JFrame { private JTextArea noteArea; public static void main(String[] args) { NotePad p = new NotePad(); p.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE); p.setSize(500,300); p.setVisible(true); } public NotePad() { super("Java Notepad"); setLayout(new BorderLayout()); noteArea = new JTextArea("",20,20); noteArea.setWrapStyleWord(true); noteArea.setLineWrap(true); Font font = new Font("sanserif", Font.BOLD,14); noteArea.setFont(font); JScrollPane scroller = new JScrollPane(noteArea); scroller.setVerticalScrollBarPolicy(ScrollPaneConstants.VERTICAL_SCROLLBAR_ALWAYS); scroller.setHorizontalScrollBarPolicy(ScrollPaneConstants.HORIZONTAL_SCROLLBAR_NEVER); add(scroller,BorderLayout.CENTER); JMenuBar menuBar = new JMenuBar(); JMenu fileMenu = new JMenu("File"); JMenuItem openMenu = new JMenuItem("Open"); openMenu.addActionListener(new ActionListener() { public void actionPerformed(ActionEvent ae) { JFileChooser openFile = new JFileChooser(); openFile.showOpenDialog(new NotePad()); loadFile(openFile.getSelectedFile()); } }); JMenuItem saveMenu = new JMenuItem("Save"); saveMenu.addActionListener(new ActionListener() { public void actionPerformed(ActionEvent ae) { JFileChooser saveFile = new JFileChooser(); saveFile.showSaveDialog(new NotePad()); fileSaved(saveFile.getSelectedFile()); } }); JMenuItem exitMenu = new JMenuItem("Close"); exitMenu.addActionListener(new ActionListener(){ public void actionPerformed(ActionEvent ae) { System.exit(0); } }); fileMenu.add(openMenu); fileMenu.add(saveMenu); fileMenu.add(exitMenu); menuBar.add(fileMenu); this.setJMenuBar(menuBar); } public void loadFile(File file) { noteArea.setText(""); try { BufferedReader read = new BufferedReader(new FileReader(file)); String line = null; while((line =read.readLine())!=null) { noteArea.append(line +"\n"); } read.close(); } catch (Exception e) { System.out.println("Error " + e.toString()); } } public void fileSaved(File file) { try { PrintWriter writer = new PrintWriter(file); String[] lines = noteArea.getText().split("\\n"); for (String ) { writer.println(words); } writer.close(); } catch (Exception e) { System.out.println("Error " + e.toString()); } } } btw I can't post my question because of not explaning the scenario according to the site. So there. Thanks for the help

  Read the article

• What if Google’s ‘Project Glass’ Ran on Windows? [Funny Video]

  - by Asian Angel

  The tech sphere has been abuzz lately about Google’s new ‘Project Glass’, but what would happen if it ran on Windows? You can view the original ‘Project Glass’ video below… Windows Project Glass: One day too… [via Geeks are Sexy] How to Stress Test the Hard Drives in Your PC or Server How To Customize Your Android Lock Screen with WidgetLocker The Best Free Portable Apps for Your Flash Drive Toolkit

  Read the article

• Where have I been? Speaking a lot, actually…

  - by drsql

  A few weeks back (Feb 27) I spoke at the Rocky Mountain Tech Trifecta ( http://rmtechtrifecta.pbworks.com/ ), where I gave the SQL Track keynote, and then did my Database Design session.  Great time and I had a blast giving a keynote. It was especially fun just doing a lightweight session just encouraging folks to do design. Last week, I spoke virtually for the Minnesota PASS group, giving the same presentation, plus 10% and including my patent pending Lego audience (The Minifiggers) and audience...(read more)

  Read the article

• This Isn’t Hard: Allow Spouses to Attend Conferences

  - by andyleonard

  There was a bit of a hubbub at Tech Ed 2013 North America . It began with generalized disorganization, escalated when site security escorted Greg Young’s ( blog | @gregyoung ) wife from the building, and ended with him cancelling his presentations at both the North American and European conferences. Greg’s post has generated some responses, but – according to him – nothing from Microsoft. That’s disappointing. Greg and his wife deserve an apology. Why Not? The best conferences I’ve attended (I’m...(read more)

  Read the article

• N. Korea develops operating system with Windows-like GUI, Linux guts

  <b>IT World:</b> "The North Korean government appears to have developed its own graphical Linux-based "Red Star" operating system, though its people still prefer that symbol of Yankee high-tech imperialism, Microsoft Windows."

  Read the article

• A Day in the Life of a Coder

  <b>Tech Comics:</b> "Sometimes getting started in the morning is the hardest part of a long day."

  Read the article

• ASUS unveils the DR-900 E-Reader

  ASUS UK let a few photos out on Flickr recently, showing the new DR-900 E-Reader. The leading tech blogs picked up on the story, but ASUS didn?t give much away about the DR-900?s specification ? but ... [Author: James Kidder - Computers and Internet - April 04, 2010]

  Read the article

• ASP.NET Frameworks and Raw Throughput Performance

  - by Rick Strahl

  A few days ago I had a curious thought: With all these different technologies that the ASP.NET stack has to offer, what's the most efficient technology overall to return data for a server request? When I started this it was mere curiosity rather than a real practical need or result. Different tools are used for different problems and so performance differences are to be expected. But still I was curious to see how the various technologies performed relative to each just for raw throughput of the request getting to the endpoint and back out to the client with as little processing in the actual endpoint logic as possible (aka Hello World!). I want to clarify that this is merely an informal test for my own curiosity and I'm sharing the results and process here because I thought it was interesting. It's been a long while since I've done any sort of perf testing on ASP.NET, mainly because I've not had extremely heavy load requirements and because overall ASP.NET performs very well even for fairly high loads so that often it's not that critical to test load performance. This post is not meant to make a point  or even come to a conclusion which tech is better, but just to act as a reference to help understand some of the differences in perf and give a starting point to play around with this yourself. I've included the code for this simple project, so you can play with it and maybe add a few additional tests for different things if you like. Source Code on GitHub I looked at this data for these technologies: ASP.NET Web API ASP.NET MVC WebForms ASP.NET WebPages ASMX AJAX Services  (couldn't get AJAX/JSON to run on IIS8 ) WCF Rest Raw ASP.NET HttpHandlers It's quite a mixed bag, of course and the technologies target different types of development. What started out as mere curiosity turned into a bit of a head scratcher as the results were sometimes surprising. What I describe here is more to satisfy my curiosity more than anything and I thought it interesting enough to discuss on the blog :-) First test: Raw Throughput The first thing I did is test raw throughput for the various technologies. This is the least practical test of course since you're unlikely to ever create the equivalent of a 'Hello World' request in a real life application. The idea here is to measure how much time a 'NOP' request takes to return data to the client. So for this request I create the simplest Hello World request that I could come up for each tech. Http Handler The first is the lowest level approach which is an HTTP handler. public class Handler : IHttpHandler { public void ProcessRequest(HttpContext context) { context.Response.ContentType = "text/plain"; context.Response.Write("Hello World. Time is: " + DateTime.Now.ToString()); } public bool IsReusable { get { return true; } } } WebForms Next I added a couple of ASPX pages - one using CodeBehind and one using only a markup page. The CodeBehind page simple does this in CodeBehind without any markup in the ASPX page: public partial class HelloWorld_CodeBehind : System.Web.UI.Page { protected void Page_Load(object sender, EventArgs e) { Response.Write("Hello World. Time is: " + DateTime.Now.ToString() ); Response.End(); } } while the Markup page only contains some static output via an expression:<%@ Page Language="C#" AutoEventWireup="false" CodeBehind="HelloWorld_Markup.aspx.cs" Inherits="AspNetFrameworksPerformance.HelloWorld_Markup" %> Hello World. Time is <%= DateTime.Now %> ASP.NET WebPages WebPages is the freestanding Razor implementation of ASP.NET. Here's the simple HelloWorld.cshtml page:Hello World @DateTime.Now WCF REST WCF REST was the token REST implementation for ASP.NET before WebAPI and the inbetween step from ASP.NET AJAX. I'd like to forget that this technology was ever considered for production use, but I'll include it here. Here's an OperationContract class: [ServiceContract(Namespace = "")] [AspNetCompatibilityRequirements(RequirementsMode = AspNetCompatibilityRequirementsMode.Allowed)] public class WcfService { [OperationContract] [WebGet] public Stream HelloWorld() { var data = Encoding.Unicode.GetBytes("Hello World" + DateTime.Now.ToString()); var ms = new MemoryStream(data); // Add your operation implementation here return ms; } } WCF REST can return arbitrary results by returning a Stream object and a content type. The code above turns the string result into a stream and returns that back to the client. ASP.NET AJAX (ASMX Services) I also wanted to test ASP.NET AJAX services because prior to WebAPI this is probably still the most widely used AJAX technology for the ASP.NET stack today. Unfortunately I was completely unable to get this running on my Windows 8 machine. Visual Studio 2012  removed adding of ASP.NET AJAX services, and when I tried to manually add the service and configure the script handler references it simply did not work - I always got a SOAP response for GET and POST operations. No matter what I tried I always ended up getting XML results even when explicitly adding the ScriptHandler. So, I didn't test this (but the code is there - you might be able to test this on a Windows 7 box). ASP.NET MVC Next up is probably the most popular ASP.NET technology at the moment: MVC. Here's the small controller: public class MvcPerformanceController : Controller { public ActionResult Index() { return View(); } public ActionResult HelloWorldCode() { return new ContentResult() { Content = "Hello World. Time is: " + DateTime.Now.ToString() }; } } ASP.NET WebAPI Next up is WebAPI which looks kind of similar to MVC. Except here I have to use a StringContent result to return the response: public class WebApiPerformanceController : ApiController { [HttpGet] public HttpResponseMessage HelloWorldCode() { return new HttpResponseMessage() { Content = new StringContent("Hello World. Time is: " + DateTime.Now.ToString(), Encoding.UTF8, "text/plain") }; } } Testing Take a minute to think about each of the technologies… and take a guess which you think is most efficient in raw throughput. The fastest should be pretty obvious, but the others - maybe not so much. The testing I did is pretty informal since it was mainly to satisfy my curiosity - here's how I did this: I used Apache Bench (ab.exe) from a full Apache HTTP installation to run and log the test results of hitting the server. ab.exe is a small executable that lets you hit a URL repeatedly and provides counter information about the number of requests, requests per second etc. ab.exe and the batch file are located in the \LoadTests folder of the project. An ab.exe command line  looks like this: ab.exe -n100000 -c20 http://localhost/aspnetperf/api/HelloWorld which hits the specified URL 100,000 times with a load factor of 20 concurrent requests. This results in output like this:   It's a great way to get a quick and dirty performance summary. Run it a few times to make sure there's not a large amount of varience. You might also want to do an IISRESET to clear the Web Server. Just make sure you do a short test run to warm up the server first - otherwise your first run is likely to be skewed downwards. ab.exe also allows you to specify headers and provide POST data and many other things if you want to get a little more fancy. Here all tests are GET requests to keep it simple. I ran each test: 100,000 iterations Load factor of 20 concurrent connections IISReset before starting A short warm up run for API and MVC to make sure startup cost is mitigated Here is the batch file I used for the test: IISRESET REM make sure you add REM C:\Program Files (x86)\Apache Software Foundation\Apache2.2\bin REM to your path so ab.exe can be found REM Warm up ab.exe -n100 -c20 http://localhost/aspnetperf/MvcPerformance/HelloWorldJsonab.exe -n100 -c20 http://localhost/aspnetperf/api/HelloWorldJson ab.exe -n100 -c20 http://localhost/AspNetPerf/WcfService.svc/HelloWorld ab.exe -n100000 -c20 http://localhost/aspnetperf/handler.ashx > handler.txt ab.exe -n100000 -c20 http://localhost/aspnetperf/HelloWorld_CodeBehind.aspx > AspxCodeBehind.txt ab.exe -n100000 -c20 http://localhost/aspnetperf/HelloWorld_Markup.aspx > AspxMarkup.txt ab.exe -n100000 -c20 http://localhost/AspNetPerf/WcfService.svc/HelloWorld > Wcf.txt ab.exe -n100000 -c20 http://localhost/aspnetperf/MvcPerformance/HelloWorldCode > Mvc.txt ab.exe -n100000 -c20 http://localhost/aspnetperf/api/HelloWorld > WebApi.txt I ran each of these tests 3 times and took the average score for Requests/second, with the machine otherwise idle. I did see a bit of variance when running many tests but the values used here are the medians. Part of this has to do with the fact I ran the tests on my local machine - result would probably more consistent running the load test on a separate machine hitting across the network. I ran these tests locally on my laptop which is a Dell XPS with quad core Sandibridge I7-2720QM @ 2.20ghz and a fast SSD drive on Windows 8. CPU load during tests ran to about 70% max across all 4 cores (IOW, it wasn't overloading the machine). Ideally you can try running these tests on a separate machine hitting the local machine. If I remember correctly IIS 7 and 8 on client OSs don't throttle so the performance here should be Results Ok, let's cut straight to the chase. Below are the results from the tests… It's not surprising that the handler was fastest. But it was a bit surprising to me that the next fastest was WebForms and especially Web Forms with markup over a CodeBehind page. WebPages also fared fairly well. MVC and WebAPI are a little slower and the slowest by far is WCF REST (which again I find surprising). As mentioned at the start the raw throughput tests are not overly practical as they don't test scripting performance for the HTML generation engines or serialization performances of the data engines. All it really does is give you an idea of the raw throughput for the technology from time of request to reaching the endpoint and returning minimal text data back to the client which indicates full round trip performance. But it's still interesting to see that Web Forms performs better in throughput than either MVC, WebAPI or WebPages. It'd be interesting to try this with a few pages that actually have some parsing logic on it, but that's beyond the scope of this throughput test. But what's also amazing about this test is the sheer amount of traffic that a laptop computer is handling. Even the slowest tech managed 5700 requests a second, which is one hell of a lot of requests if you extrapolate that out over a 24 hour period. Remember these are not static pages, but dynamic requests that are being served. Another test - JSON Data Service Results The second test I used a JSON result from several of the technologies. I didn't bother running WebForms and WebPages through this test since that doesn't make a ton of sense to return data from the them (OTOH, returning text from the APIs didn't make a ton of sense either :-) In these tests I have a small Person class that gets serialized and then returned to the client. The Person class looks like this: public class Person { public Person() { Id = 10; Name = "Rick"; Entered = DateTime.Now; } public int Id { get; set; } public string Name { get; set; } public DateTime Entered { get; set; } } Here are the updated handler classes that use Person: Handler public class Handler : IHttpHandler { public void ProcessRequest(HttpContext context) { var action = context.Request.QueryString["action"]; if (action == "json") JsonRequest(context); else TextRequest(context); } public void TextRequest(HttpContext context) { context.Response.ContentType = "text/plain"; context.Response.Write("Hello World. Time is: " + DateTime.Now.ToString()); } public void JsonRequest(HttpContext context) { var json = JsonConvert.SerializeObject(new Person(), Formatting.None); context.Response.ContentType = "application/json"; context.Response.Write(json); } public bool IsReusable { get { return true; } } } This code adds a little logic to check for a action query string and route the request to an optional JSON result method. To generate JSON, I'm using the same JSON.NET serializer (JsonConvert.SerializeObject) used in Web API to create the JSON response. WCF REST   [ServiceContract(Namespace = "")] [AspNetCompatibilityRequirements(RequirementsMode = AspNetCompatibilityRequirementsMode.Allowed)] public class WcfService { [OperationContract] [WebGet] public Stream HelloWorld() { var data = Encoding.Unicode.GetBytes("Hello World " + DateTime.Now.ToString()); var ms = new MemoryStream(data); // Add your operation implementation here return ms; } [OperationContract] [WebGet(ResponseFormat=WebMessageFormat.Json,BodyStyle=WebMessageBodyStyle.WrappedRequest)] public Person HelloWorldJson() { // Add your operation implementation here return new Person(); } } For WCF REST all I have to do is add a method with the Person result type.   ASP.NET MVC public class MvcPerformanceController : Controller { // // GET: /MvcPerformance/ public ActionResult Index() { return View(); } public ActionResult HelloWorldCode() { return new ContentResult() { Content = "Hello World. Time is: " + DateTime.Now.ToString() }; } public JsonResult HelloWorldJson() { return Json(new Person(), JsonRequestBehavior.AllowGet); } } For MVC all I have to do for a JSON response is return a JSON result. ASP.NET internally uses JavaScriptSerializer. ASP.NET WebAPI public class WebApiPerformanceController : ApiController { [HttpGet] public HttpResponseMessage HelloWorldCode() { return new HttpResponseMessage() { Content = new StringContent("Hello World. Time is: " + DateTime.Now.ToString(), Encoding.UTF8, "text/plain") }; } [HttpGet] public Person HelloWorldJson() { return new Person(); } [HttpGet] public HttpResponseMessage HelloWorldJson2() { var response = new HttpResponseMessage(HttpStatusCode.OK); response.Content = new ObjectContent<Person>(new Person(), GlobalConfiguration.Configuration.Formatters.JsonFormatter); return response; } } Testing and Results To run these data requests I used the following ab.exe commands:REM JSON RESPONSES ab.exe -n100000 -c20 http://localhost/aspnetperf/Handler.ashx?action=json > HandlerJson.txt ab.exe -n100000 -c20 http://localhost/aspnetperf/MvcPerformance/HelloWorldJson > MvcJson.txt ab.exe -n100000 -c20 http://localhost/aspnetperf/api/HelloWorldJson > WebApiJson.txt ab.exe -n100000 -c20 http://localhost/AspNetPerf/WcfService.svc/HelloWorldJson > WcfJson.txt The results from this test run are a bit interesting in that the WebAPI test improved performance significantly over returning plain string content. Here are the results:   The performance for each technology drops a little bit except for WebAPI which is up quite a bit! From this test it appears that WebAPI is actually significantly better performing returning a JSON response, rather than a plain string response. Snag with Apache Benchmark and 'Length Failures' I ran into a little snag with Apache Benchmark, which was reporting failures for my Web API requests when serializing. As the graph shows performance improved significantly from with JSON results from 5580 to 6530 or so which is a 15% improvement (while all others slowed down by 3-8%). However, I was skeptical at first because the WebAPI test reports showed a bunch of errors on about 10% of the requests. Check out this report: Notice the Failed Request count. What the hey? Is WebAPI failing on roughly 10% of requests when sending JSON? Turns out: No it's not! But it took some sleuthing to figure out why it reports these failures. At first I thought that Web API was failing, and so to make sure I re-ran the test with Fiddler attached and runiisning the ab.exe test by using the -X switch: ab.exe -n100 -c10 -X localhost:8888 http://localhost/aspnetperf/api/HelloWorldJson which showed that indeed all requests where returning proper HTTP 200 results with full content. However ab.exe was reporting the errors. After some closer inspection it turned out that the dates varying in size altered the response length in dynamic output. For example: these two results: {"Id":10,"Name":"Rick","Entered":"2012-09-04T10:57:24.841926-10:00"} {"Id":10,"Name":"Rick","Entered":"2012-09-04T10:57:24.8519262-10:00"} are different in length for the number which results in 68 and 69 bytes respectively. The same URL produces different result lengths which is what ab.exe reports. I didn't notice at first bit the same is happening when running the ASHX handler with JSON.NET result since it uses the same serializer that varies the milliseconds. Moral: You can typically ignore Length failures in Apache Benchmark and when in doubt check the actual output with Fiddler. Note that the other failure values are accurate though. Another interesting Side Note: Perf drops over Time As I was running these tests repeatedly I was finding that performance steadily dropped from a startup peak to a 10-15% lower stable level. IOW, with Web API I'd start out with around 6500 req/sec and in subsequent runs it keeps dropping until it would stabalize somewhere around 5900 req/sec occasionally jumping lower. For these tests this is why I did the IIS RESET and warm up for individual tests. This is a little puzzling. Looking at Process Monitor while the test are running memory very quickly levels out as do handles and threads, on the first test run. Subsequent runs everything stays stable, but the performance starts going downwards. This applies to all the technologies - Handlers, Web Forms, MVC, Web API - curious to see if others test this and see similar results. Doing an IISRESET then resets everything and performance starts off at peak again… Summary As I stated at the outset, these were informal to satiate my curiosity not to prove that any technology is better or even faster than another. While there clearly are differences in performance the differences (other than WCF REST which was by far the slowest and the raw handler which was by far the highest) are relatively minor, so there is no need to feel that any one technology is a runaway standout in raw performance. Choosing a technology is about more than pure performance but also about the adequateness for the job and the easy of implementation. The strengths of each technology will make for any minor performance difference we see in these tests. However, to me it's important to get an occasional reality check and compare where new technologies are heading. Often times old stuff that's been optimized and designed for a time of less horse power can utterly blow the doors off newer tech and simple checks like this let you compare. Luckily we're seeing that much of the new stuff performs well even in V1.0 which is great. To me it was very interesting to see Web API perform relatively badly with plain string content, which originally led me to think that Web API might not be properly optimized just yet. For those that caught my Tweets late last week regarding WebAPI's slow responses was with String content which is in fact considerably slower. Luckily where it counts with serialized JSON and XML WebAPI actually performs better. But I do wonder what would make generic string content slower than serialized code? This stresses another point: Don't take a single test as the final gospel and don't extrapolate out from a single set of tests. Certainly Twitter can make you feel like a fool when you post something immediate that hasn't been fleshed out a little more <blush>. Egg on my face. As a result I ended up screwing around with this for a few hours today to compare different scenarios. Well worth the time… I hope you found this useful, if not for the results, maybe for the process of quickly testing a few requests for performance and charting out a comparison. Now onwards with more serious stuff… Resources Source Code on GitHub Apache HTTP Server Project (ab.exe is part of the binary distribution)© Rick Strahl, West Wind Technologies, 2005-2012Posted in ASP.NET  Web Api   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

  Read the article

• Viewing the Future Through the ‘Eyes of the Past’ [Humorous Image]

  - by Asian Angel

  Really makes you feel nostalgic, eh? You can access the full-size version to get a better view of the upper right corner here. O_O This is a close approximation of the original title of the post. [via Reddit - Tech Support Gore] How To Get a Better Wireless Signal and Reduce Wireless Network Interference How To Troubleshoot Internet Connection Problems 7 Ways To Free Up Hard Disk Space On Windows

  Read the article

< Previous Page | 42 43 44 45 46 47 48 49 50 51 52 53  | Next Page >