Search Results

Search found 2745 results on 110 pages for 'waiting'.

Page 46/110 | < Previous Page | 42 43 44 45 46 47 48 49 50 51 52 53  | Next Page >

• Unable chage IP address for eth0 without restart in Ubunto

  - by Rodnower

  I have Ubuntu 12.04.1 installed. I try to change IP address of the interface eth0 in /etc/network/interfaces from 192.168.1.3 to 192.168.1.4: auto lo iface lo inet loopback pre-up iptables-restore < /etc/iptables.up.rules auto eth0 iface eth0 inet static address 192.168.1.4 gateway 192.168.1.1 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255 sudo service networking status Now I issue: sudo service networking restart I have response: stop: Unknown instance: networking stop/waiting And IP remains 192.168.1.3: eth0 Link encap:Ethernet HWaddr 00:1e:33:71:cd:a4 inet addr:192.168.1.3 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::21e:33ff:fe71:cda4/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3861 errors:0 dropped:0 overruns:0 frame:0 TX packets:3291 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3423285 (3.4 MB) TX bytes:521854 (521.8 KB) Interrupt:45 Base address:0x4000 Only after restart IP changing... Any ideas?

  Read the article

• Send Ctrl+Alt+Del over VNC with Windows Vista and UAC off?

  - by jasonh

  I'm trying to set up a machine here with UltraVNC on Windows Vista with UAC off. The problem is, in this configuration, I can't send Ctrl + Alt + Del (CAD) to the Windows Vista machine, and so I'm stuck at the login screen, which is waiting for the CAD sequence. I'm joined to a domain, so I don't think I can disable the CAD requirement. I can't re-enable UAC either. I also tried using the on-screen keyboard, but it didn't seem to work. Is there a workaround or a solution?

  Read the article

• Slow Gmail attachment download over HTTPS

  - by Todd

  It only affects Gmail. I have tested other HTTP, FTP and HTTPS websites and downloading is fine, at the exact same time the problem is affecting a Gmail attachment download. The symptoms include both: High waiting time, before the download starts (on the order of 30 seconds); AND Very slow download transfer speeds (on the order of 1kbps) It's a very strange problem, and I didn't find any recent issues relating to Google Australia. The account works fine at another site with a different ISP, so it's either a computer configuration or ISP - I lean to the latter.

  Read the article

• Smoothwall: How to stop live network traffic displayed in terminal?

  - by Jakobud

  For our network we are working on building a new firewall box and we just installed Smoothwall on it to test it out. When I start up the box, before the login prompt even appears, all of the live IP traffic is appearing in the terminal (source/destination IPs, MACs, Ports, etc). I wait for the boot sequence to finish, but all I see is this IP traffic. The login prompt never comes up. I finally get sick of waiting and press CTRL + C and it says "Entering Run Level 3" and then I get a login prompt finally. Once I login, the IP traffic continues to fly through the terminal even as I'm trying to type commands. How do I turn this stuff off? Is this the default setting for Smoothwall to have all this IP traffic going by on the screen? It essentially renders using the terminal to being useless.

  Read the article

• In Outlook 2010, can you add "Categories" to the "New Email" Ribbon?

  - by Jeff

  I couldn't figure out how to do this in Outlook 2007, and I was hoping I could do it in Outlook 2010... I want the ability to quickly apply a category when composing a new email (typically a "Waiting For..." category) for things that need a response. It is possible to apply a category by clicking the "Options" ribbon, then the little arrow under the More Options section - but why can't I get the nice big "Categories" drop-down that's available in the "Tags" section of the main Outlook window. There are about a kabillion commands in the "Customize Ribbon" dialog box for the New Mail window, but I couldn't find anything about Categories. Should I just give up?

  Read the article

• How do I know if my disks are being hit with too much IO reads or writes or both?

  - by Mark F

  Hi All, So I know a bit about disk I/O and bottlenecks relating to this especially when relating to databases. But how do I really know what the max IO numbers will be for my disks? What metric might be available to me for working out roughly (but needs to be a good approximation) of how much capacity (if you will) have I got left available in I/O. I've seen it before where things are bubbling along nicely and then all of a sudden, everything screams to a halt, and it ends up being an IO bound problem. Is there a better way to predict when IO is reaching its limits? This article was interesting but not giving the answer I desire. "http://serverfault.com/questions/61510/linux-how-can-i-see-whats-waiting-for-disk-io". So is my best bet surrounding just looking at 'CPU IO WAIT'? There must be a more reactive method for this? Best, M

  Read the article

• How to retry connections with wget?

  - by Andrei

  I have a very unstable internet connection, and sometimes have to download files as large as 200 MB. The problem is that the speed frequently drops and sits at --, -K/s and the process remains alive. I thought just to send some KILL signals to the process, but as I read in the wget manual about signals it doesn't help. How can I force wget to reinitialize itself and pick the download up where it left off after the connection drops and comes back up again? I would like to leave wget running, and when I come back, I want to see it downloading, and not waiting with speed --,-K/s.

  Read the article

• Tunneling through SSH for 1521 port access?

  - by A T

  I am developing locally on my computer, using my own Apache server with PHP configured. My database however is remotely located on an Oracle 11g Database Server. We were also given a separate remote server for hosting our .html and .php files, however only FTP access has been provided there. Development is far too slow waiting for the FTP connection to push. So I decided to develop locally, but still use the remote DB server. Unfortunately that gives me an error. Not sure how—or where—to integrate tunnelling. Do I add something to the oci_connect HOST in my PHP file, or do I encapsulate my whole environment over SSH?

  Read the article

• How to share datastores between multiple exchange servers?

  - by Johan

  I have an Exchange 2003 box that is seriously overstressed. I want to transfer its duties to a new and faster box. I don't cannot suffer downtime, so I have to do this stuff live. Here's what I plan to do: Install Exchange 2003 on the new server Set up the new server, so it will accept requests from users for their mailboxes I want to do as little manual set up as possible, because that 'll eat up my time and is too error prone Than I want to transfer my datastores one by one to the new server and have those users (once the datastore in the new server is up and running) to get their data from the new server (without them noticing) I don't have to transfer all the datastores, some of them need to stay on the old box (because I'm still waiting for extra HD space to arrive from the supplier) What steps do I need to follow to do this? The new box has never seen this domain before, the old exchange server is not the DC, we have a dedicated DC.

  Read the article

• How to expand Raid 5 on ICH10 - Gigabyte ex58-ds4?

  - by NeverEatAlone

  I was wondering if there is a relatively simple way to expand my HD space. My setup is 4 x 640 GB drives. Motherboard has 4 ports on 1 controller and 2 ports on another controller, however they cant be joined. I would like to somehow get more store space in raid configuration. One scenario that I can see working is replacing one 640 drive for a 2TB drive. Waiting for Raid to rebuild. Rinse and repeat. However, I have no idea if I would be able to even see/access the new space. All alternatives / ideas are welcome. Thank you

  Read the article

• mysql does not start properly

  - by Erik Svenson

  Hi I am using XAMPP on Windows XP. Since I changed the version from 1.73 to 1.77 MySQL does not start properly. That means that the status says, it is started, but the safety check says it is not . Because of that I cannot set any password, which is unacceptable. Any idea? That's mysql_error.log: 111007 9:42:56 [Note] Plugin 'FEDERATED' is disabled. 111007 9:42:56 InnoDB: The InnoDB memory heap is disabled 111007 9:42:56 InnoDB: Mutexes and rw_locks use Windows interlocked functions 111007 9:42:56 InnoDB: Compressed tables use zlib 1.2.3 111007 9:42:56 InnoDB: Initializing buffer pool, size = 16.0M 111007 9:42:56 InnoDB: Completed initialization of buffer pool 111007 9:42:57 InnoDB: highest supported file format is Barracuda. 111007 9:42:57 InnoDB: Waiting for the background threads to start 111007 9:42:58 InnoDB: 1.1.8 started; log sequence number 1595675 111007 9:42:58 [Note] Event Scheduler: Loaded 0 events 111007 9:42:58 [Note] mysql\bin\mysqld.exe: ready for connections. Version: '5.5.16' socket: '' port: 3306 MySQL Community Server (GPL)

  Read the article

• Ubuntu reset network configuration

  - by user1103294

  When I boot up my ubuntu server, it cannot connect to my wireless network anymore. It says "waiting for network configuration" for 60 seconds, boots up, but no wireless. I suspect it's because of the following reasons. I used to connect to a wireless connection named 2WIRE555, password: 123abc But then I upgraded my connection and my new wireless connection was named 2WIRE444, password:111111 Being lazy, I simply renamed 2WIRE555 to 2WIRE444 and changed the password accordingly. I was hoping this would work but ever since then my network configurations is messed up. So back to the issue, how do I reset my network configurations for my Ubuntu 11.10 server?

  Read the article

• Subdomain returns error when restarting Apache

  - by xXx

  I try to install a subdomain on my dedicated server. I made a new DNS rules to point my sub domain to the IP of my serv. After reading this Subdomain on apache i tried to add new rules on Apache : NameVirtualHost *:80 <VirtualHost *:80> ServerName tb.mysite.org DocumentRoot /home/mysite/wwww/tb/ <Directory "/home/mysite/wwww/tb/"> AllowOverride All Allow from all </Directory> </VirtualHost> Then i restart Apache but it returns sudo /etc/init.d/apache2 restart * Restarting web server apache2 Warning: DocumentRoot [/home/mysite/wwww/tb/] does not exist [Wed Jun 27 10:32:58 2012] [warn] NameVirtualHost *:80 has no VirtualHosts ... waiting Warning: DocumentRoot [/home/mysite/wwww/tb/] does not exist [Wed Jun 27 10:32:59 2012] [warn] NameVirtualHost *:80 has no VirtualHosts the tb/ folder is existing, don't why Apache can't find it... And it says that NameVirtualHost:80 has no VirtualHosts...

  Read the article

• Crontab -- scheduling my backups

  - by Garfonzo

  I want to do a backup every Friday night (no, this is not the whole backup routine, just part of it). Each Friday night's backup will not be overwritten until 4 weeks later. So, essentially, I have a four revolving backups: Week1, week2, week3, and week4. Now, I need the week1 backup script to run every 4 weeks. But I also want week2's script to run every four weeks. I know that I can tell the crontab to execute something every X weeks/days/hours/whatever. However, how do I set it up so that each of these four scripts actually run on different weeks, how do I avoid all 4 scripts running on the same night, then dutifully waiting for weeks only to all run again? Thanks.

  Read the article

• Use Amazon EC2 as a backup server

  - by MikeMurko

  I would like to use Amazon EC2 as an emergency backup database+web server in the event our primary host becomes unavailable. I feel like I wouldn't have trouble setting up a Windows instance, install SQL Server and get the web server up and running (would take a few hours, plus installing various libraries, our source code, etc). My question relates to pricing. If I simply "stop" the instance rather than "terminate" it, does that stop counting "instance-hours"? I would prefer not to terminate the instance and lose all that work I spent setting it up. If I must "terminate" in order to stop the billing - is it possible to make an image of the server after I have set it all up, then save that image somewhere (S3?) Is this something that people do regularly? Ideally this instance would just be waiting in the wings for an issue with our host, but costing us nothing except perhaps data storage costs.

  Read the article

• Customising error bars

  - by itid

  Hello I've been told I HAVE TO have custom error bars for an assignment I have to hand in. Okay, I have a scatter graph with twelve points, and the error for each one is different. It's the same plus and minus, but different for each one. The twelve different error values are sitting nicely in a column. I have been told I can reference that column in "custom error bars" simply by indicating the range of values, like F2-F14. However, I get an error message every time. When I open Custom Error Bars, it is set up like this: ={} obviously waiting for a function. The error message says remove the equals sign. How should I enter the value range, please ?

  Read the article

• Is there any automatic Windows software to check status of website..

  - by user59280

  Is there any automatic Windows software application to check status of website and alert me through mail or message or trigger am alarm.. Example: Consider I am waiting to buy a new latest movie ticket online (through) and the ticket booking has not been informed properly (online booking is opening at a random time). In this situation I will be forced to slave for my PC to get the tickets. To avoid such situation, can you suggest me a software? So I need a software which will alert me when the online booking is open.. Can anyone please help me?

  Read the article

• Synergy stopped moving cursor over to client computer (config worked previously)

  - by crazedgremlin

  I am using QuickSynergy on OSX on my client computer and the standard Synergy program on Windows. I had a configuration that worked two days ago when I last used it, but today I came into work and it wasn't working. The odd thing is that the server shows that the client connects: NOTE: started server, waiting for clients NOTE: accepted client connection NOTE: client "danbook.local" has connected It's just that the cursor won't move to the other screen. The only change in either of my systems was that I added 4GB of RAM to the client, though that seems unimportant. What might cause this to happen?

  Read the article

• Send chrome tab from w7 laptop to w7 HTPC? (Like with iPad to AppleTV)

  - by Justin

  For the last couple days I've been trying to figure out how to get open tabs syncing between chrome installs on different computers to no avail. (if it's supposed to work the way I think it should, that is.) I have a laptop that I do all my web browsing on. Once in a while I'll come across some video that's worthy of the big-screen and the surround sound and want to open that tab (or media) on the HTPC. It'd be nice if I could just 'Right click Send to HTPC' and it opens up there with no further hassle. But even opening chrome on the HTPC and finding all my current tabs waiting would be fine. Alas, open tabs syncing doesn't seem to actually open tabs on other devices for me. Has anyone come up with a way to accomplish anything similar? Thanks all!

  Read the article

• Editing files on linux server from windows

  - by celicni

  I want to edit text files on Linux server from Windows, using text editor like Notepad++ or UltraEdit. I've managed to do so using WinSCP. It can edit files remotely and offers me to choose local application to open those files. That is exactly what I need, but when I hit ctrl-s (not every time, in about 50% cases), it waits for around 10 seconds, alerts that connection has failed, and offers me to "abort". When I click abort, it instantly reconnect and save file. So does anybody knows any other way to edit files remotely without this annoying waiting period.

  Read the article

• Move MySQL master

  - by Noodles

  I currently have a master db server (lets call it db1) and 6 slaves (slave1-6). I've setup a new server (db2) as a slave of db1 and it's in sync. I want to change all the slaves to use db2 instead of db1, but with minimal downtime/data loss. At the moment the only way I can think of doing it is shutting down our website (so data stops being written to db1), waiting until all the slaves are up to date, flush logs on db1, shut it down. Reset master on db2, change all slaves to point to db2 with log position = 0. Is this the right way to do it or is there a way to do it without taking the site offline?

  Read the article

• Windows Command queue?

  - by Stefano

  i'm thinking if does exist some kind of software that can put in a queue a bunch of windows commands... for example i can say to first copy some file somewhere, then rename those, then delete the old files, then edit one of them etc.... without waiting the effective execution of any of those passages.... this could be useful when copying big files that take a lot and i don't want to sit in front of the computer keeping the eyes on the progress bar... does exist anything like this?

  Read the article

• Azure Linux out of band managment

  - by faker

  I have a Linux (Ubuntu) virtual machine running on Azure. It seems like the only way to connect to it is via SSH. This is OK for normal operation, but what to do when something goes wrong (fsck waiting for user-input, new kernel doesn't boot, mis-configured network, etc.)? There is a grayed out "Connect" button in the management interface, and the help for it says: To access a virtual machine running Windows Server, click Connect and follow the instructions. Enter the password that was set when the virtual machine was created. The Connect button is not available for a virtual machine running Linux, but you can use your favorite SSH program to access it. I've read the documentation on the command line tools, but there is also no way to connect to it. Is there any way for me to get such a console?

  Read the article

• Mysql loses its root password

  - by RubyDev

  I am having a strange problem, my mysql loses/resets the root password automatically. By which I mean that it resets it to none. It has happened twice this month. I am worried that it can be a security issue as data is open waiting only for someone trying no password! Here is the version: mysql --version mysql Ver 14.14 Distrib 5.1.56, for redhat-linux-gnu (i386) using readline 5.1 Any help would be appreciated. Update: Output of select user, host, password from mysql.user; how it looks after the password got reset | root | localhost | | root | 127.0.0.1 | | | localhost | | | admin | localhost | ################################# | (I have removed the actual output with #) So all the passwords are blank, except for for another user named 'admin'

  Read the article

• downgrading the php version

  - by aadiahg

  I used to upgrade my php from 5.3.5-1ubuntu7.11 to 5.3.18-1~dotdeb.0 I got a lot of problems after the upgrading process . My localhost/phpmyadmin displaying the blank screen. apache2 show me a warning message waiting [Sun Nov 04 12:11:21 2012] [warn] The Alias directive in /etc/apache2/conf.d/phpmyadmin.conf at line 3 will probably never match because it overlaps an earlier Alias. most of CMS cant installed and show me this error Required MySQL version for CMS is 5.x but this server has: mysqlnd 5.0.8-dev the Scripts that has been already installed some of there functions doesn’t work i've googled a lot to fix this problems also i ve googled about downgrading the php version from 5.3.18 to 5.3.x but it doesn’t work with me Can you help please Many thanks

  Read the article

< Previous Page | 42 43 44 45 46 47 48 49 50 51 52 53  | Next Page >