Search Results

Search found 2177 results on 88 pages for 'wifi'.

Page 46/88 | < Previous Page | 42 43 44 45 46 47 48 49 50 51 52 53  | Next Page >

  • Broadcom 4313 doesn't work following 12.04 upgrade

    - by Lucas
    I have an hp G62-228Ca laptop with a BCM4313 previously running Ubuntu 11.10. I ran the 12.04 upgrade last night without much thought. Following the upgrade and mandatory reboot, the wireless card no longer shows up in the network manager, the first time I've had any kind of issues with wireless under Ubuntu. I've done much Googling on the issue but so far I haven't found a permanent solution. Mucking around with some packages though (I've installed five different ones or so), I've managed to devise a workaround that I must run every time I boot the laptop. I have to remove the Broadcom STA driver and reinstall it. Inspiration taken from here: WiFi does not work, Broadcom STA Wireless driver does not work on a BCM4313 After the second modprobe command, the wireless reappears in the network manager and ten seconds after that I'm back on the wifi. If anyone can provide some advice on how to fix this permanently I will be extremely grateful. I'd rather not roll back to 11.10 or reinstall, but I will if I need to. Just let me know if you need the output from any terminal commands. Thanks in advance!

    Read the article

  • NetworkManager detects no networks with a RTL8188CE

    - by Cormac O'Brien
    I'm on a 2011 Lenovo Thinkpad T420i with a Realtek RTL8188CE WiFi adapter. Here's the scenario: I pop in the Ubuntu LiveCD to install. Laptop detects all networks in range, I connect to my home network, internet working great. Once Ubuntu finishes installing, the home network I am connected to is the only one which appears in the applet list. Upon restarting or waking from suspend, NetworkManager does not detect any networks – it simply displays "Disconnected" under the Wireless Network section of the menu. I am able to connect to my home network by using the "Connect to Hidden Wireless Network" option and it works immediately. I have yet to test if this works with other SSIDs. I have tried reinstalling the entire OS as well as NetworkManager and my wireless drivers. For hardware info, I ran: cormac@cormac-T420:~$ sudo lshw -c network Here is the output for my wireless card: *-network description: Wireless interface product: RTL8188CE 802.11b/g/n WiFi Adapter vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 01 serial: d0:df:9a:08:73:50 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=rtl8192ce driverversion=3.2.0-26-generic firmware=N/A ip=192.168.1.138 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn resources: irq:17 ioport:5000(size=256) memory:f2500000-f2503fff I can provide more information if required. This was not a problem in Natty or Oneiric. I hope this can be fixed, I don't want to have to ask for an SSID wherever I need to connect.

    Read the article

  • Switching To Ubuntu 14.04 from Windows 8.1

    - by Asangam
    everyone i am newto these linux stuffs. Currently i'm a user of Windows8.1 . When windows 8 was roling out i was like i'm never going to leave and will be always stick to windows8 but now i think it's time to switch linux because being in windows forever i don't think i can do something very good .I wanted to be OpenSource :) . So i really dont have any idea about linux . For me the best distro is Ubuntu and Kubuntu offcourse the latest release . So what i'm afraid of switching to linux is its compability .The compatibility i'm talking about is with the hardware's and driver's . For eg sometime after fresh install of windows we need to install the display,usb and wifi drivers to function . For some computer or brands those driver's are hard to find and i can't even think of linux how hard are they to find if it needs installing drivers. So my main question is that do i need to install the drivers for my wifi adapters display and some other stuffs or the distro i choosed i.e Ubuntu 14.0.4 consists of those dirvers and what about the 64 and 32bit . My machines is 64bit aso do i need to install the 64bit one . I mean i know the advantages of installing the 64 bit one but like windows is it kinda hard to find softwares for the 64 bit one . Or the 32 bit is recommended . And Yes I will be highly appreciated for the answers to my questions . Thank You :)

    Read the article

  • Is this a b43 driver problem?

    - by Nullet
    I have 13.04 on a Dell Inspiron 1564 with Broadcom 4312 WiFi card. The wl drivers cause kernel panic on linux-3.8 so I succesfully installed the b43 driver a couple of months ago. Now I have changed ISP and got a new router, and the connection drop when downloading software from internet to a 2008r2 using Remmina Client, and apt-get install on virtual machines in virtualbox. I have no idea why this suddenly became a problem.. My phone does not loose the connection, just Ubuntu. Output from /var/log/syslog after lost connection rfkill list(after disconnecting): 0: phy0: Wireless LAN Soft blocked: yes Hard blocked: yes I can use NetworkManager to disable wireless and then enable wireless to connect again. rfkill ublock all/wifi/0 removes only Soft blocked. lshw -C network *-network description: Wireless interface physical id: 4 logical name: wlan0 serial: 78:e4:00:78:d2:05 capabilities: ethernet physical wireless configuration: broadcast=yes driver=b43 driverversion=3.8.0-32-generic firmware=478.104 ip=10.0.0.3 link=yes multicast=yes wireless=IEEE lspci 04:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01) After waking from suspend and when booting, it takes about 40 sec to get network connection. This has been a problem all along AND a different question, but I mention it anyway.. cus it's annoying! Please take a look and hopefully someone spot a problem! Thanks!

    Read the article

  • WP7 “Phantom Data” Source Possibly Revealed?

    - by Bil Simser
    Recently there’s been rumours floating around regarding “phantom” Windows Phone 7 data being magically sent and received on the latest WP7 phones. The news has mostly been floating around twitter so I didn’t pay it much attention. The BBC Technology News picked it up so I thought I would look more into it myself seeing that we have WP7 phones and maybe there was some truth to all this (and more importantly what was the cause). Full disclosure. I don’t have a lot of data points around this. This is from looking at a few phone logs, changing the configuration and looking back again after the change. I haven’t done a clean baseline test nor have I done testing with hundreds of phones. I leave the experience up to the reader to decide. So I went spelunking into the phone logs to see what was up. Most providers will show you data usage, at least on a daily basis. I lucked out with the provider and plan in that they provide hourly breakdowns. Here’s a snapshot from my usage throughout one night. Timestamp Data Usage 12:38:30 AM 2098 Kilobytes 1:30:30 AM 2 Kilobytes 2:38:30 AM 7118 Kilobytes 3:38:30 AM 6622 Kilobytes 4:38:30 AM 76 Kilobytes 5:38:30 AM 29 Kilobytes 6:38:30 AM 19 Kilobytes 7:38:30 AM 20 Kilobytes So a few observations from this data: Data seems to be collected on a regular basis. Looking at some other people phone logs, the times vary but it’s always hourly. There’s not a tremendous amount of data here (about 16 megabytes) but it seems like a lot for 7 hours The phone was connected to my home Wifi during this period Nothing was running and the phone was in a locked state Like I said, not a lot of data but it adds up. 16MB for 7 hours = about 50MB in a 24 hour period. That’s just plain old data being collected (somewhere, somehow) and not actual usage (Marketplace, Email, Browsing, etc.). Besides, when connected to a WiFi network you shouldn’t be charged data usage from your phone company (in theory, YMMV). After reviewing the logs I made a theory that the only thing that could possibly be sending data is the Feedback feature. With no other apps running under lock, what else could it be? In Windows 7 under your Settings the last option is Feedback. This sends feedback to Microsoft to “help improve Windows Phone”. On this page you have three options: Send feedback and use my cellular data connection Send feedback and (presumably) use my WiFi connection Don’t send feedback Knowing what I know about Microsoft, they do use the feedback data. For example some of the placement and inclusion of features in Office 2007 was based on that Feedback data that Office sends (assuming you had opted in). However in the Privacy Statement (it’s long but a good read at least once in your life), the Phone manual, and every other source I could look at there is no information about how much data it’s planning to send, just that it’s sending some data and that “some data charges with your carrier may apply”. Looking back at the logs, I have to wonder. 6MB at 3:30 and *then* 7MB the next hour. That’s a lot of information. And it adds up. 50MB in a 24 hour period X 30 days puts most people over a normal 1GB plan. And frankly why am I paying for a data plan only to have 80% of it chewed up by Microsoft, with no real benefit to me. If they included porn in the 50mb daily transfer I’d be okay with this, but I don’t see any new movies on my phone. So I turned it off. Set Feedback to disabled and wait. I waited. And waited. And generally didn’t use the phone if I could. The next day I went back to look at the data usage logs from the time period after turning the feedback mechanism off. Here are the results. Timestamp Data Usage 1:19:48 PM 0 Kilobytes 2:19:48 PM 0 Kilobytes 3:19:48 PM 0 Kilobytes 4:19:48 PM 678 Kilobytes (took a phone call) 5:19:48 PM 82 Kilobytes 6:19:48 PM 88 Kilobytes 7:20:30 PM 86 Kilobytes (guess they changed their reporting time) 8:20:30 PM 86 Kilobytes 9:20:30 PM 66 Kilobytes 10:20:30 PM 67 Kilobytes 11:20:30 PM 49 Kilobytes 12:20:30 AM 32 Kilobytes 1:20:30 AM 38 Kilobytes 2:20:31 AM 18 Kilobytes 3:20:31 AM 27 Kilobytes 4:20:31 AM 86 Kilobytes 5:20:31 AM 53 Kilobytes 6:20:31 AM 22 Kilobytes 7:22:15 AM 30 Kilobytes (another reporting time change) 8:22:15 AM 29 Kilobytes 9:22:15 AM 74 Kilobytes 10:22:15 AM 154 Kilobytes (phone call) 11:22:15 AM 12 Kilobytes 12:13:27 PM 49 Kilobytes 1:13:27 PM 197 Kilobytes (phone call) Quite a *drastic* change from what Feedback was turned on. I mean for a 24 hour period (sans 3 phone calls) I consumed about 1MB. Still quite a bit of transfer going on but at least it amounts to 30MB per month, not 30MB per day! Like I said this observation is neither scientific or conclusive. You decide what to do but frankly until Microsoft makes this data transfer exempt from your data plan (like that will happen) I would just turn Feedback off. YMMV.

    Read the article

  • GameKit: GKSession manual

    - by mongeta
    Hello, I want to connect two devices using the GKSession, starting one as a server and the other one as a client. Using this configuration I can't use the GKPeerPickerController. I'm having problems for connecting the two devices: Using only bluetooth: impossible using WiFi: at least there are some data exchange between the devices but no successfully conection. In the interface file I have the GKSessionDelegate GKSession *session; In the implementation, I start the server using this code: session = [[GKSession alloc] initWithSessionID:@"iFood" displayName:nil sessionMode:GKSessionModeClient]; session.delegate = self; session.available = YES; The client starts using this code: session = [[GKSession alloc] initWithSessionID:@"iFood" displayName:nil sessionMode:GKSessionModeServer]; session.delegate = self; session.available = YES; How I can force the use of Bluetooth instead of the WiFi ? Also I have implemented those calls: -(void)session:(GKSession *)session didReceiveConnectionRequestFromPeer:(NSString *)peerID { NSLog(@"Someone is trying to connect"); } - (BOOL)acceptConnectionFromPeer:(NSString *)peerID error:(NSError **)error { NSLog(@"acceptConnectionFromPeer"); } When I start, I get this into the debugger: Listening on port 50775 2010-02-19 14:55:02.547 iFood[3009:5103] handleEvents started (2) And when the other device starts to find, I get this: ~ DNSServiceBrowse callback: Ref=187f70, Flags=2, IFIndex=2 (name=[en0]), ErrorType=0 name=00eGs1R1A..Only by Audi regtype=_2c3mugr67ej6j7._udp. domain=local. ~ DNSServiceQueryRecord callback: Ref=17bd40, Flags=2, IFIndex=2 (name=[en0]), ErrorType=0 fullname=00eGs1R1A\.\.Only\032by\032Audi._2c3mugr67ej6j7._udp.local. rrtype=16 rrclass=1 rdlen=18 ttl=4500 ** peer 1527211048: oldbusy=0, newbusy=0 ~ DNSServiceBrowse callback: Ref=187f70, Flags=2, IFIndex=-3 (name=[]), ErrorType=0 name=00eGs1R1A..Only by Audi regtype=_2c3mugr67ej6j7._udp. domain=local. GKPeer[186960] 1527211048 service count old=1 new=2 ~ DNSServiceQueryRecord callback: Ref=17bd40, Flags=2, IFIndex=-3 (name=[]), ErrorType=0 fullname=00egs1r1a\.\.only\032by\032audi._2c3mugr67ej6j7._udp.local. rrtype=16 rrclass=1 rdlen=18 ttl=7200 ** peer 1527211048: oldbusy=0, newbusy=0 ~ DNSServiceBrowse callback: Ref=187f70, Flags=2, IFIndex=-3 (name=[]), ErrorType=0 name=00TF5kc1A..Only by Audi regtype=_2c3mugr67ej6j7._udp. domain=local. ~ DNSServiceQueryRecord callback: Ref=188320, Flags=2, IFIndex=-3 (name=[]), ErrorType=0 fullname=00tf5kc1a\.\.only\032by\032audi._2c3mugr67ej6j7._udp.local. rrtype=16 rrclass=1 rdlen=18 ttl=7200 ** peer 1723356125: oldbusy=0, newbusy=0 ~ DNSServiceQueryRecord callback: Ref=188320, Flags=2, IFIndex=2 (name=[en0]), ErrorType=0 fullname=00TF5kc1A\.\.Only\032by\032Audi._2c3mugr67ej6j7._udp.local. rrtype=16 rrclass=1 rdlen=18 ttl=4500 ** peer 1723356125: oldbusy=0, newbusy=0 What I'm missing here ? I'm sure that both devices have bluetooth enabled and connected into the same WiFi. thanks, r.

    Read the article

  • iPhone to iPhone communication

    - by Dan
    Hi, I have been looking into communication methods between two iPhone devices and as I understand it there are two main methods to do this: Bluetooth and WiFi. However I wanted to know if anyone knows of any other way of sharing information between two iPhones? If I were in an area with no WiFi or mobile signal, and couldn't use Bluetooth for whatever reason, is there anything that could be done to broadcast data from one iPhone to another? I'm sure its a bit of a silly question, but if you don't ask, you don't get; and if someone knows of anything I might be able to look into with regards to this, I would be very appreciative. Thanks, Dan

    Read the article

  • Networking Multiplayer games in Cocoa?

    - by Conor Taylor
    I have made this game for Mac OS, but I realised that i need to make it better with multiplayer. Im an experienced Cocoa developer (so please, no RTFM's) but for some reason I never even touched on networking. I was wondering how I could send game date from com1 to com2, and vice versa, over different wifi networks. Cheers, Conor Edit: When I say different wifi networks, I mean no bonjour. I want to be able to play the game in the US with a guy in china!

    Read the article

  • Enable mobile network

    - by Sebi
    In my application it is necessary to have internet connection. Therefore i check while starting if a Internet connection is availaible. If not I ask the user if he would establish an Internet Connection, and what type (wifi oder mobile). The wifi connection i can establish with the following code WifiManager wifiManager = (WifiManager) getSystemService(Context.WIFI_SERVICE); wifiManager.setWifiEnabled(true); But how do i establish a mobile connection? Coulnd't find a single code snippet at Google.

    Read the article

  • GKPeerStateAvailable for non existing peers?

    - by Ernest
    Hi, used this website for the long time to find answers, now need to ask on myself! :) I have implemented multi player for my game using GKSession and client/server approach, not using peer picker (up to 4 player allowed). I have one big problem which I can't find solution for. If you disconnect/reconnect server peer quickly enough, client peer will "remember" that host and will show it in the list of all available peers permanently, only turning wifi/bluetooth off resets this. So if I do this 5 times in a row, my client will show 5 available hosts with the same name! Anyone had experience with this? Any idea of workarounds? I should note that requirements for my game is iPhone SDK 3.0 for Bluetooth and 3.1 for Wifi as GKSession supports both now.

    Read the article

  • Android Broadcast Address

    - by Eef
    Hey, I am making a Client Server application for my Android phone. I have created a UDP Server in Python which sits and listens for connections. I can put either the server IP address in directly like 192.169.0.100 and it sends data fine. I can also put in 192.168.0.255 and it find the server on 192.169.0.100. Is it possible to get the broadcast address of the network my Android phone is connected to? I am only ever going to use this application on my Wifi network or other Wifi networks. Cheers

    Read the article

  • iPhone tethering app source

    - by jamone
    I know there are a few apps that allow a jail broken iPhone to tether over WiFi to a computer so the computer can use the iPhone's 3G. What I want to know is if anyone knows of any open source apps that do this, or partial code to handle the majority of this that I could make in to a minimal app? I don't want to jail break since I do official development, but would like to be able to compile and sideload an app on my personal phone to do this. Even without jail broken privileges an app could use an existing wifi connection (adhoc created by the computer) to share its 3G.

    Read the article

  • Android - modes of connectivity, device identification and device inter-communication?

    - by MalcomTucker
    Can someone explain a couple of very simple concepts to me - I'm interested in mobile devices running android and how they are identified over networks. Some scenarios: Device is connected over WiFi - presumably the device has a standard IP address as with any host and can communicate with any other android host over TCP/IP (assuming it knows the participating device's IP? Device is connected over bluetooth - how are devices identified in this case? Device is connected over mobile operator's network - this is the one I'm interested in and confused by - is there anyway for two or more devices to discover each other and communicate via the mobile operator's network? How does a device communicate with a backend server in this scenario? In other words, how do apps and devices communicate when not connected to a WiFi network? Thanks for any advice..

    Read the article

  • low latency data link pc to android

    - by steveh
    can anyone recommend a method for low latency bi-directional com link between my pc app and android slave app. the app i have works now via wifi but the latency is too slow (about 300mS), i'm looking to get it down to 10mS or so. the android is acting like a glorified remote control to the game on the pc. the apk displays a low res image and sends button presses back to the game and the round trip need to be quick i'm thinking the only option beside the network, is to connect a usb cable but i don't see a lot of support for that path and not even sure it would be lower latency than wifi any ideas please?

    Read the article

  • python packaging problem

    - by Apache
    hi expert, I develop code in python to scan wifi and send to the server, it's working fine when executed manually, but i packaged it via http://www.python-packager.com by uploading my .py file and they create package for me as deb file for linux, and i download it and install the package but nothing happen when i click the .exe or set it as startup application. Why does this happen? Nothing is printed in the terminal. In .py file i'm having print statement to check manually to list out the wifi scan value, data to post to the server, response from the server once send. How this can be solved? thanks

    Read the article

  • Forward traffic between two VLANs.

    - by Michael
    I have a small network with two VLANs. One is our internal network for basic file sharing, etc and the other is a public wifi network for our customers. The internal network is configured as 192.168.1.x and the public wifi is 192.168.11.x. We have one printer at 192.168.1.50. I would like to be able to have that printer available to our customer at 192.168.11.50. I suspect it can be done with iptables, but I'm brand new to it and I just can seem to work out the syntax. Can anyone offer any help? Oh, this is all running on a wrt54g router running Tomato.

    Read the article

  • Is there really a need for encryption to have true wireless security? [closed]

    - by Cawas
    I welcome better key-wording here, both on tags and title. I'm trying to conceive a free, open and secure network environment that would work anywhere, from big enterprises to small home networks of just 1 machine. I think since wireless Access Points are the most, if not only, true weak point of a Local Area Network (let's not consider every other security aspect of having internet) there would be basically two points to consider here: Having an open AP for anyone to use the internet through Leaving the whole LAN also open for guests to be able to easily read (only) files on it, and even a place to drop files on Considering these two aspects, once everything is done properly... What's the most secure option between having that, or having just an encrypted password-protected wifi? Of course "both" would seem "more secure". But it shouldn't actually be anything substantial. That's the question, but I think it may need more elaborating on. If you don't think so, please feel free to skip the next (long) part. Elaborating more on the two aspects ... I've always had the feeling using any kind of the so called "wireless security" methods is actually a bad design. I'm talking mostly about encrypting and pass-phrasing (which are actually two different concepts), since I won't even consider hiding SSID and mac filtering. I understand it's a natural way of thinking. With cable networking nobody can access the network unless they have access to the physical cable, so you're "secure" in the physical way. In a way, encrypting is for wireless what building walls is for the cables. And giving pass-phrases would be adding a door with a key. But the cabling without encryption is also insecure. If someone plugin all the data is right there. So, while I can see the use for encrypting data, I don't think it's a security measure in wireless networks. It's wasting resources for too little gain. I believe we should encrypt only sensitive data regardless of wires. That's already done with HTTPS, so I don't really need to encrypt my torrents, for instance. They're torrents, they are meant to be freely shared! As for using passwords, they should be added to the users, always. Not to wifi. For securing files, truly, best solution is backup. Sure all that doesn't happen that often, but I won't consider the most situations where people just don't care. I think there are enough situations where we actually use passwords on our OS users, so let's go with that in mind. I keep promoting the Fonera concept as an instance. It opens up a free wifi port, if you choose so, and anyone can connect to the internet through that, without having any access to your LAN. It also uses a QoS which will never let your bandwidth drop from that public usage. That's security, and it's open. But it's lacking the second aspect. I'll probably be bashed for promoting the non-usage of WPA 2 with AES or whatever, but I wanted to know from more experienced (super) users out there: what do you think?

    Read the article

  • Loading latest firmware iwlwifi-6000

    - by grzeh
    I just installed 11.10 on Dell XPS 15z. Somebody know why kernel does not load the latest firmware for wifi Intel Centrino Advanced-N 6230. $ modinfo iwlagn |grep iwlwifi-6000 firmware: iwlwifi-6000g2b-5.ucode firmware: iwlwifi-6000g2a-5.ucode firmware: iwlwifi-6000-4.ucode In package linux-firmware there is latest version (iwlwifi-6000g2b-6.ucode) $ dpkg -L linux-firmware | grep iwlwifi-6000 /lib/firmware/iwlwifi-6000-4.ucode /lib/firmware/iwlwifi-6000g2a-5.ucode /lib/firmware/iwlwifi-6000g2b-5.ucode **/lib/firmware/iwlwifi-6000g2b-6.ucode**

    Read the article

  • Dell Vostro 3560 bluetooth doesn't work

    - by Shein
    I installed the wireless driver using this instruction How do I install BCM43142 wireless drivers for Dell Vostro 3460/3560 and I have WiFi working. No problems here. But unfortunately the bluetooth doesn't work. The ubuntu bar shows the bluetooth sign and I can turn the bluetooth on/off but I can't discover any devices. And I can't find my laptop when I turn visibility On. So, obviously bluetooth doesn't work. I couldn't find the reports that blutooth can actually work with this adapter in Ubuntu. So, my question is: Is there anyone with BCM43142 adapter that have bluetooth working? Thank You in advance. PS. Ubuntu 12.10 x64 Update: After some fiddling around with different drivers from different sources I managed to get bluetooth working. Not flawlessly but at least I can pair a device. Bluetooth started working after installation of this package bt-bcm43142-onereic_0.0+20111116somerville2_amd64.deb Originally I found this package on the disk with Ubuntu which came with the Laptop. What this package does, it installs a firmware loader and a firmware itself. This firmware needs to get bluetooth working. Still bluetooth sometimes doesn't work even with this package. But manual loading the firmware helps. brcm_patchram_plus_usb --patchram /lib/firmware/BCM43142A0_001.001.011.0028.0036.hcd hci0 Also I found it strange that this package writes all different ids into /sys/bus/usb/drivers/btusb/new_id because only one from the list matches my device ID bcm43142.conf: install btusb /sbin/modprobe --ignore-install btusb && echo '0a5c 21d3' > /sys/bus/usb/drivers/btusb/new_id && echo '0a5c 21d7' > /sys/bus/usb/drivers/btusb/new_id && echo '0a5c 21e1' > /sys/bus/usb/drivers/btusb/new_id && echo '0a5c 21e3' > /sys/bus/usb/drivers/btusb/new_id && hciconfig hci0 up && /usr/bin/brcm_patchram_plus_usb --patchram /lib/firmware/BCM43142A0_001.001.011.0028.0036.hcd hci0 & My lsusb: ... Bus 002 Device 003: ID 0a5c:21d7 Broadcom Corp. In conclusion: bluetooth works not nearly as good as in windows :( once I even got a complete crash of the system because of the btusb module. Luckily WiFi works perfectly :)

    Read the article

  • ath9k driver does not weak up

    - by shantanu
    I know this is common question but i found no suitable answer, so i am asking this again. I installed ubuntu 11.10. I found the bug for ath9k, so set first network boot from BIOS menu. That's worked. I have upgraded to 12.04 yesterday. Now ath9k is creating problem again. First network boot is still enable. ath9k works at start. But failed(connect again and again) after couple of minutes. dmesg show error that it can not weak up in 500us. So i tried #compat-wireless-3.5.1-1. But result is same. I have also added #nohwcrypt=1 option in /etc/modeprob.d/ath9k.conf. Still no luck. I tried #rmmod and then modprobe sudo modprobe ath9k nohwcrypt=1 dmesg shows me error: [ 400.690086] ath9k: Driver unloaded [ 406.214329] ath9k 0000:06:00.0: enabling device (0000 -> 0002) [ 406.214348] ath9k 0000:06:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 406.214368] ath9k 0000:06:00.0: setting latency timer to 64 [ 406.428517] ath9k 0000:06:00.0: Failed to initialize device [ 406.428852] ath9k 0000:06:00.0: PCI INT A disabled [ 406.428887] ath9k: probe of 0000:06:00.0 failed with error -5 dmesg error when driver fail: 355.023521] ath: Chip reset failed [ 355.023524] ath: Unable to reset channel, reset status -22 [ 355.023556] ath: Unable to set channel [ 355.088569] ath: Failed to stop TX DMA, queues=0x10f! [ 355.122708] ath: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff [ 355.122714] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up [ 355.263962] ath: Chip reset failed [ 355.263966] ath: Unable to reset channel (2437 MHz), reset status -22 [ 358.996063] ath: Failed to wakeup in 500us [ 364.004182] ath: Failed to wakeup in 500us I can not install fresh ubuntu because i have lots of application installed. System : Acer Aspire 4250 AMD dual core 1.6GHZ Atheros Communications Inc. AR9485 Wireless Network Adapter (rev 01) EDITED Now i am in serious problem. No wifi device is not showing in ifconfig or lshw commands. Only ether-net interface shows. I tried (FN + WIFI) several times to enable the device but nothing helps. Now I have installed fresh ubuntu 12.04. Please help lshw -c network: *-network description: Ethernet interface product: 82566DC Gigabit Network Connection vendor: Intel Corporation physical id: 19 bus info: pci@0000:00:19.0 logical name: eth0 version: 02 serial: 00:19:d1:7a:8e:f9 size: 100Mbit/s capacity: 1Gbit/s width: 32 bits clock: 33MHz capabilities: pm msi bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=e1000e driverversion=2.0.0-k duplex=full firmware=1.1-0 ip=192.168.1.114 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:45 memory:90300000-9031ffff memory:90324000-90324fff ioport:20c0(size=32) rfkill command does not show anything but no error.

    Read the article

  • Macbook Pro 13" Retina (10,2): Keyboard and Touchpad don't work correcltly

    - by Dirk
    I'm dealing with Ubuntu since about 5 years and installed it on several laptops. Now I'm stuck when trying to install Ubuntu 12.04.1 on a brand new Macbook Pro 13" Retina (10,2). I sucessfully can start Ubuntu from an USB stick, the Ubuntu desktop is visible, a mouse cursor is visible. But there is no respond to keyboard or touchpad input. So I cannot really install Ubuntu on the Macbook. The details of my approach: Prepare an empty USB stick Download "ISO 2 USB EFI Booter for Mac" and copy the file bootX64.efi to the USB drive as /efi/boot/bootX64.efi. Download Ubuntu 12.04.1 Desktop for Mac from http://cdimage.ubuntu.com/releases/1-amd64+mac.iso and copy the iso the USB drive as /efi/boot/boot.iso Put the USB stick into the Macbook Press and hold the "alt" button while switching the Macbook on Select "EFI Boot" from the boot menu that appears and press the Return / Enter key Immediately a black terminal screen appears with the headline "Welcome to the Ubuntu ISO << - EFI booter". 30 seconds later the familiar Ubuntu startup graphics screen is showing. Further 20 seconds later Ubuntu has started and the desktop is visible - in wonderfully fine resolution Now the computer does not respond to any actions on the touchpad nor the keyboard Who did install Ubuntu on this Macbook Pro 13" Retina (10,2) successfully? On this site https://help.ubuntu.com/community/MacBookPro this unit is not listed yet, anyway. Any help would be greatly appreciated! Dirk PS: I could now install ubuntu with an external USB Keyboard/Mouse Set. But now, after showing the grub menu, a kernel panic error appears and booting stops :-/ Seems that the ubuntu images fit not to a macbook pro retina 13" (10,2) yet. PPS: Ok, there are new facts: If I edit the boot options and enter " nomodeset noapic" ubuntu starts and Keyboard and Touchpad work! Now I have to enable WiFi... PPPS: After installing Broadcom firmware from USB Live stick as described in other posts, WiFi was enabled. Then I could update ubuntu normally to 12.10. After this, I must not enter "nomodeset noapic" in the grub menu anymore. Last Thing now is the Touchpad. The driver seems not to be there. The touch pad is only showing as mouse. t.b.c.

    Read the article

  • Wireless Adapter Review: hField Wi-Fire

    Tired of weak and wimpy WiFi? This clip-on replacement for your laptop's 802.11b/g adapter promises up to triple the range, plus finding wireless networks you couldn't access before. Is it the best $59 a road warrior ever spent?

    Read the article

  • Wireless Adapter Review: hField Wi-Fire

    Tired of weak and wimpy WiFi? This clip-on replacement for your laptop's 802.11b/g adapter promises up to triple the range, plus finding wireless networks you couldn't access before. Is it the best $59 a road warrior ever spent?

    Read the article

  • Networking disabled

    - by Terry Dixon
    Both the Wifi and the ethernet connection to the internet are not working. All had been functioning fine until the Ubuntu suspended itself. On re-starting, the connection to internet failed to function and now I get the message "Network Disabled" whenever I re-boot. nm-tool tells me the state is "asleep". Stopping and starting the NetworkManager has no effect The machine is an Inspiron 9300 and work perfectly with Windows. How do I wake the networking up? Thanks

    Read the article

  • How to create wifihotspot in ubuntu 10.04 LTS

    - by aspdeepak
    I am using ubuntu 10.04 LTS in my lenovo laptop and have a android ICS device. I want to create a wifi-hotspot in ubuntu, which I can later use for connecting android device. I need this setup for capturing the packets from android device and later analysing them using wireshark in my ubuntu. I tried to create a new hotspot using "Create a new wireless Network" wizard from network manager applet, but for some reason the following happens. It breaks the existing internet connection(either the WLAN, or ethernet) Its not visible in the list of available WIFI hotspots in the android device. My Chipset information 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07) 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:03.0 Communication controller: Intel Corporation Mobile 4 Series Chipset MEI Controller (rev 07) 00:19.0 Ethernet controller: Intel Corporation 82567LF Gigabit Network Connection (rev 03) 00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) 00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) 00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03) 00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03) 00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03) 00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03) 00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 03) 00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) 00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) 00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) 00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI Controller (rev 03) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03) 03:00.0 Network controller: Intel Corporation PRO/Wireless 5100 AGN [Shiloh] Network Connection 15:00.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ba) 15:00.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 04) 15:00.2 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 21) 15:00.3 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev ff) 15:00.4 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 11) 15:00.5 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 11) Supported interface modes: * IBSS * managed * monitor

    Read the article

< Previous Page | 42 43 44 45 46 47 48 49 50 51 52 53  | Next Page >