Search Results

Search found 15249 results on 610 pages for 'tv shows'.

Page 461/610 | < Previous Page | 457 458 459 460 461 462 463 464 465 466 467 468  | Next Page >

• Disable or remove filter driver for single HID device

  - by snoopen

  Running Windows XP in a corporate setting here. I have an issue where a filter driver is interfering with the functionality of different USB HIDs. For example graphics tablets do not respond while the filter driver is in place. I've also had the issue with foot pedals used with transcription software. My question is really two fold: A) what makes Windows use a filter driver on one HID but not another? B) when a filter driver is causing conflicts how can I disable it on the affected devices? Background I've previously narrowed down the issue to the filter driver by uninstalling the software (Funk Proxy Host) responsible for the filter driver. The software is a type of RDP we use here at work. (I might have even booted into safe mode and renamed the file, I forget). I believe the filter driver is present to disable or modify the use of the local keyboard and mouse while admin staff are assisting users. Either way I don't have the authority to just go uninstalling this software. As far as I can tell the software versions are the same, however I'm not sure if the device driver definitions are all the same as I don't know where these things would be located. To check for the presence of the filter driver I locate the hardware device in Device Manager, click Properties Driver tab Driver Details.... It shows up as ph32ihid.sys. Even though all machines are meant to have the same SOE and do have Funk Proxy Host installed I don't always have issues with the same HIDs. A few machines here the foot pedals without any issues. I've not had any machines work with the graphics tablet without uninstalling Funk software. Driver details I've just read up a bit more about filter drivers and found the drivers description in the registry under "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\ProxyHostHIDFilter" There it's called "Kernel-mode HID filter driver for the Proxy Host". Presumably I could also disable it here but that would be system wide which is probably not desirable?

  Read the article

• Corrupted NTFS Drive showing multiple unallocated partitions

  - by volting

  My external hdd with a single NTFS partition was accidentaly plugged out (kids!)... and is now corrupted. Iv tried running ntfsfix - with no luck - output below.. When I look at the disk under disk management in Windows 7 it shows up as having 5 partitions 2 of which are unallocated - none have drive letters and it is not possible to set any (that option and most others are greyed out) - so I can't run chkdsk /f Iv tried using Minitool partition wizard which was mentioned as a solution to another similar question here. It showed the whole drive as one partition, but as unallocated, and the option -- "Check File System" was greyout. Is there anything else I could try ? Output of fdisk -l Disk /dev/sdb: 1500.3 GB, 1500299395072 bytes 255 heads, 63 sectors/track, 182401 cylinders, total 2930272256 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytest I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x69205244 This doesn't look like a partition table Probably you selected the wrong device. Device Boot Start End Blocks Id System /dev/sdb1 ? 218129509 1920119918 850995205 72 Unknown /dev/sdb2 ? 729050177 1273024900 271987362 74 Unknown /dev/sdb3 ? 168653938 168653938 0 65 Novell Netware 386 /dev/sdb4 2692939776 2692991410 25817+ 0 Empty Partition table entries are not in disk order Output of ntfsfix me@vaio:/dev$ sudo ntfsfix /dev/sdb Mounting volume... ntfs_mst_post_read_fixup_warn: magic: 0xffffffff size: 1024 usa_ofs: 65535 usa_count: 65534: Invalid argument Record 0 has no FILE magic (0xffffffff) Failed to load $MFT: Input/output error FAILED Attempting to correct errors... ntfs_mst_post_read_fixup_warn: magic: 0xffffffff size: 1024 usa_ofs: 65535 usa_count: 65534: Invalid argument Record 0 has no FILE magic (0xffffffff) Failed to load $MFT: Input/output error FAILED Failed to startup volume: Input/output error Checking for self-located MFT segment... ntfs_mst_post_read_fixup_warn: magic: 0xffffffff size: 1024 usa_ofs: 65535 usa_count: 65534: Invalid argument OK ntfs_mst_post_read_fixup_warn: magic: 0xffffffff size: 1024 usa_ofs: 65535 usa_count: 65534: Invalid argument Record 0 has no FILE magic (0xffffffff) Failed to load $MFT: Input/output error Volume is corrupt. You should run chkdsk. Options available with MiniTool: Related questions: How to fix a damaged/corrupted NTFS filesystem/partition without losing the data on it? Repair corrupted NTFS File System

  Read the article

• Windows shutting down, CPU maxing out in Windows-7 32-bit? [closed]

  - by Vivek Sharma

  I have no idea, what is happening to my laptop. For last 5-6 times it has automatically shutdown while running, without doing anything serious. And I even do get the message during boot which says - Start windows normal - Start in safe mode It just boots up normal. Few days ago, my screen blinked and it the PC shutdown immediately. After that I was not able to get it started. I got it repaired, the guy said he has replaced the display chip (nVidia-nvs-140), but i seriously doubt that. Now it started working, but would shutdown every 20 mins or so. I have a dual boot, ubuntu-11.10 works just fine. Virus scan on windows shows nothing. I am pasting my perfmon output. My CPU for reason is maxing out to 100% continously, for windows internal processes. Please have a look at the attached file. Strangly now for last 2 hours it is working fine, but i am just writing emails and reading excels. ThinkPad T61 | t9300 | 3gb | nVidia 140 nvs-quadro (latest driver 296.10) What do you suggest?

  Read the article

• Strange 400 error with IIS 7.5 and a webservice?

  - by Juw

  Ok, this is a longshot. I have been pondering this for hours. I have no clue how to solve this. But maybe someone here can recognize the problem and point me to right direction. I have an IIS 7.5 server and a MSSQL database on a different server. On the IIS server there is a webservice that communicates with the MSSQL server. The problem is that when there is data that the MSSQL server needs to send back to the webservice and the webservice delivers that back to the webbrowser (JSON) i get a 400 error. Looking through the logs for the IIS there is just a 400....nothing more. When i put in a call to the service in my browsers URL field i get this: "The server encountered an error processing the request. Please see the service help page for constructing valid requests to the service." There is NOTHING wrong with how i call the webservice. It has worked before on a different server (a dev server). Do someone have a clue on what this can be about? 400 means malformed URL...it isn´t. And why is that when there are no data to return to the user...everything works. But when there is data fetched from the MSSQL DB...the 400 error shows up. Hope someone have some tips how to solve it. Thanx in advance.

  Read the article

• Windows 7 access denied to executables.. by what?

  - by stijn

  Ever since I started using Windows 7 this problem has been bothering me. From time to time I see similar questions popping up on misc forums, but never did I see an answer. Here are two scenarios that nearly always reproduce it: the explorer way with explorer, navigate to a directory containing at least one exe file go one directory up immediately delete the directory just navigated to yields Folder Acces Denied dialog stating You need permission to perform this action You require permission from Administrators to make changes to this folder, with the buttons try Again and Cancel hitting Try Again never works immediately. Waiting a minute or so and then clickig it again does work note: if in step 2 and waiting a minute or more before going up one directory, the problem does not occur and the folder can be deleted the visual studio way build a project producing an exe file run the executable then close it immediately build the project again (by changing a single character in a source file for example) yields fatal error LNK1168: cannot open /path/to/the.exe for writing note: if in step 2 and waiting a minute or more before building again, the problem does not occur some specs happens both on Windows 7 32 and 64 bit, with VS2008/2010/2011 happens on 3 different machines I do not have a virusscanner of any kind I do have a bunch of services disabled, but nothing that prevents Windows from running normally, UAC is disabled as well happens on any type of disc I always use a user account that is in the Administrators group Obviously both scenarios are very similar and extremely reproducable. So I figured some process must have the file open for some reason, and release it again later. However, using systinternal's handle -a the exe file in question never shows up. (that is the correct way to use handle, right?) So while explorer/VS are reporting they cannot access the file, handle.exe says it's not in use anywhere. This leaves me rather clueless, so I'm wondering if someone can come up with a solution: why does this happen, and how to solve it?

  Read the article

• Connections to SSH and Samba suffer from heavy delay

  - by Till Helge Helwig

  There are a lot of questions about SSH connections being delayed, which usually can be fixed by disabling the DNS lookups. Unfortunately this doesn't seem to be my problem. Our development server is accessed via SSH and Samba. When opening a connection to the server (either SSH or Samba) it takes a very long time. Accessing a Samba share via Windows is basically impossible because there is a timeout. Using smbclient works, but takes ages. When opening a SSH connection I get immediately prompted for the password and after hitting Enter the terminal instantly shows the MOTD. Afterwards it takes about a minute for the prompt to appear. I watched the load of the server while connecting via SSH and Samba and could not find anything out of order. There is nothing out of the ordinary running and hogging up memory and CPU or something. I have no clue where this delay might come from. I already tried UseDNS no in sshd_config and proxy_dns = no in smb.conf, but to no avail. Any idea about what might cause this would be greatly appreciated!

  Read the article

• How to calibrate ASUS k52f battery on Ubuntu?

  - by cutalion

  I'm not sure if the problem is in software or my battery is dying, I'll move my question to another forum if it's not a SO question I have a problem with the battery on my laptop - ASUS K52F. It shows incorrect information about capacity. When I unplug the charger it can work some time, but then it will power off without any warnings. Sometimes it will power off right after I unplug the charger. Here is some info I could get: > uname -a Linux alligator 3.5.0-18-generic #29-Ubuntu SMP Fri Oct 19 10:26:51 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux > acpi -i Battery 0: Charging, 99%, 18:25:15 until charged Battery 0: design capacity 5235 mAh, last full capacity 69964 mAh = 100% > cat /sys/class/power_supply/BAT0/uevent POWER_SUPPLY_NAME=BAT0 POWER_SUPPLY_STATUS=Charging POWER_SUPPLY_PRESENT=1 POWER_SUPPLY_TECHNOLOGY=Li-ion POWER_SUPPLY_CYCLE_COUNT=0 POWER_SUPPLY_VOLTAGE_MIN_DESIGN=10800000 POWER_SUPPLY_VOLTAGE_NOW=9246000 POWER_SUPPLY_POWER_NOW=176000 POWER_SUPPLY_ENERGY_FULL_DESIGN=**48400000** POWER_SUPPLY_ENERGY_FULL=**646822000** POWER_SUPPLY_ENERGY_NOW=**643588000** POWER_SUPPLY_MODEL_NAME=K52F-44 POWER_SUPPLY_MANUFACTURER=ASUSTek POWER_SUPPLY_SERIAL_NUMBER= I noticed, that POWER_SUPPLY_ENERGY_NOW and POWER_SUPPLY_ENERGY_FULL are greater than POWER_SUPPLY_ENERGY_FULL_DESIGN. I don't think it's ok :) I can run any additional commands.

  Read the article

• Ubuntu 9.04: Ripping CDs with grip?

  - by chris

  I tried to rip a CD tonight, and couldn't figure out how to configure grip - /dev/cdrom doesn't seem to be the mount point for music CDs any more. How can I configure grip to find CDs? Update: /etc/fstab has /dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0 But there's nothing visible in /media/cdrom0 (or /media/cdrom, which is a symlink to cdrom0) There's an icon on the desktop labeled "Audio Disk" and opening it shows the .wav files on the CD. The location is cdda://sr0/, but grip doesn't like that either. Trying to manually mount /dev/sr0, I get $ sudo mount -t auto /dev/sr0 foo/ mount: block device /dev/sr0 is write-protected, mounting read-only mount: you must specify the filesystem type Update 2: Tried to change the media handling preferences (From a file browser, Edit-Preferences, Media, CD Audio) to "Do Nothing". CD Still doesn't mount. Update 3: With an audio CD in the drive: $ ls -l /dev/ | grep cd lrwxrwxrwx 1 root root 3 2009-09-15 22:13 cdrom1 -> sr0 lrwxrwxrwx 1 root root 3 2009-09-15 22:13 cdrw1 -> sr0 drwxr-xr-x 2 root root 60 2009-09-15 22:13 pktcdvd lrwxrwxrwx 1 root root 3 2009-09-15 22:13 scd0 -> sr0 crw-rw----+ 1 root cdrom 21, 2 2009-09-15 22:13 sg2 brw-rw----+ 1 root cdrom 11, 0 2009-09-15 22:13 sr0

  Read the article

• Cisco ASA site-to-site vpn not initiating phase 1 (not sending udp 500 packets)

  - by Sean Steadman

  I am hoping someone here can help me with my problem. I am trying to setup an IPSEC site-to-site VPN between two cisco ASA 5520's in GNS3 (both using 8.4.2). I have been unsuccesful in getting the tunnel up and it appears neither ASA is sending packets out,in regards to phase 1 and phase 2 (tested by using wireshark and seeing NO udp 500 packets). Doing show ipsec sa and such shows nothing. CALIFORNIA(config)# show ipsec sa There are no ipsec sas FLA-ASA# show ipsec sa There are no ipsec sas I will attach both configurations in two different pastebin files as to keep this post a bit cleaner. Essentially California side has 172.20.1.0/24 and Florida side has 10.10.10.0/24. California ASA config: http://pastebin.com/v0pngYzF Florida ASA config: http://pastebin.com/E2geybta Please let me know if there is any other vital information that could help. I have gotten IPSEC tunnels to work using openSwan (linux) and cisco routers but cannot for the life of me get ASA IPSEC tunnels to work. The ASDM is out of the question I only use cli. Thanks for any useful help!

  Read the article

• CIFS Mounting Permissions

  - by malco

  I have an issue that I;m going round in circles with, I hope you can help. The Set up: Server 1 (CIFS Client) - CentOS 6.3 AD integrated uing Samba/Winbind & idmap_ad Server 2 (CIFS Server) - CentOS 6.3 AD integrated uing Samba/Winbind & idmap_ad All users (apart from root) are AD authenticated and this, including groups, etc works happily. What's working: I have created a share on Server 2: [share2] path = /srv/samba/share2 writeable = yes Permissions on the share: drwxrwx---. 2 root domain users 4096 Oct 12 09:21 share2 I can log into a Windows machine as user5 (member of domain users) and everything works as it should, for example: If I create a file it shows the correct permissions and attributes on both the MS and the Linux sides. Where I Fall Down: I mount the share on Server 1 using: # mount //server2/share2 /mnt/share2/ -o username=cifsmount,password=blah,domain=blah Or using fstab: //server2/share2 /mnt/share2 cifs credentials=/blah/.creds 0 0 This mounts fine, but.... If I log su, or log onto server 1 as a normal user (say user5) and try to create a file I get: #touch test touch test touch: cannot touch `test': Permission denied Then if I check the folder the file was created but as the cifsmount user: -rw-r--r--. 1 cifsmount domain users 0 Oct 12 09:21 test I can rename, delete, move or copy stuff around as user5, I just can't create anything, what am I doing wrong? I'm guessing it's something to do with the mount action as when I log onto server2 as user5 and access the folder locally it all works as it should. Can anyone point me in the right direction?

  Read the article

• Are these three brand new sticks of RAM really dead?

  - by David Brown

  I'm working on a Dell Dimension 4700 desktop for a friend. It came with 512MB of DDR2 RAM (two sticks of 256MB). One morning, it started blue screening on startup with no helpful error messages. It refused to boot into any form of Windows installation, including Safe Mode, original recovery disk, and my custom Windows PE disk. It did boot into the Ultimate Boot CD, so I ran memtest86, which reported errors everywhere. I removed one stick of RAM and the system booted up just fine. I moved the remaining stick into each slot and the system continued to operate normally, so I came to the conclusion that the stick that I removed was dead. I ordered an exact replacement, along with 2 more sticks of 256MB DDR2 (again, exactly the same as the original), bringing the total system memory to 1GB. Upon installing the three brand new sticks, the system blue screened again, this time stating that win32k.sys attempted to write to read-only memory. I inserted my custom Windows PE disk in order to get a better look at the memory dump with BlueScreenView, but it refused to boot and produced another blue screen, but without an error message. I removed each new stick one-by-one, restarting each time. It continued to blue screen until I was left with only the original stick. I then tried inserting the new sticks in various different orders, but this only produced more blue screens. I reinserted all three sticks (along with the original) and ran memtest86 again, which reported errors all over the place. So, now I'm right back where I started. I don't think it could be the slots themselves, because I can plug the original stick into any slot and it works just fine. System setup reports each stick correctly and shows the total as 1GB, however. It just seems strange to me that all three brand new sticks of RAM could be dead on arrival. Is there something I missed? Or should I just go ahead and RMA them?

  Read the article

• Nginx fails upon proxying PUT requests

  - by PartlyCloudy

  Hi. I have an arbitrary web server that supports the full range of HTTP methods, including PUT for uploads. The server runs fine in all tests with different clients. I now wanted to set this server behind an nginx reverse proxy. However, each PUT request fails. The entity body is not forwarded to the backend web server. The header fields are sent, but not body. I searched the nginx proxy documentation and find several hints that PUT might not be supported. But I also found people running svn/ web dav stuff behind nginx, so it should work. Any ideas? Here is my config: server { listen 80; server_name my.domain.name; location / { proxy_set_header X-Forwarded-Host $host; proxy_set_header X-Forwarded-Server $host; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_pass http://127.0.0.1:8000; } } Client == HTTP PUT ==> Nginx == HTTP Proxy ==> Backend Server The error.log shows no entries concerning this behaviour. Thanks in advance!

  Read the article

• Missing drive space in Server 2003

  - by Tim Brigham

  I have two drives used for SQL backups which for the last week have been acting strange - the free space indicated by windows is far off from what windirstat, etc indicates. There should only be about 60 GB of drive space used and there is about 160. This would match the utilization if the two last backup files were still residing on disk. SQL server is 2000, OS Server 2003 x64. Running on a VMware 5.0 cluster. OSSEC and McAfee for this system shows clean. My current plan is to temporarily attach one of these drives this drive to another VM for analysis. Is there anything more I should be looking at? There were a lot of pages on the net when I was looking for documentation on this issue but I haven't found this case described. EDIT: Unfortunately even a full reboot did not clear this behavior. I also used process explorer to look for open file handles. No dice.

  Read the article

• How to view / enumerate / obtain a list of all effective rights / permissions on an Active Directory object?

  - by Laura

  I am new to Server Fault and was hoping to find an answer to a question that I have been struggling with for the past week or so. I have been recently asked by my management to furnish a list of all the effective rights / permissions delegated on the Active Directory object for our Domain Admins group. I initially figured I'd use the Effective Permissions Tab in Active Directory Users and Computers but had two problems with it. The first was that it doesn't seem very accurate and the second was that it requires me to enter the name of a specific user, and it only shows me what it figures are effective permissions for that user. Now, we have more than a 1000 users in our environment so there's no way I can possibly enter 1000 user names one by one. Plus, there is no way to export that information either. I also looked at dsacls from MS but it doesn't do effective permissions. Someone pointed me to a tool called ADUCAdmin but that seems to falsely claim to do effective permissions. Could someone kindly help me find a way to obtain this listing? Basically, I need to generate a list of all the modify effective permissions granted on the Domain Admins group object along with the list of all the admins to which these permissions are granted. In case it helps, I don't need a fancy listing - simple text / CSV output would be enough I would be grateful for any assistance since this is time and security sensitive for us.

  Read the article

• pptp server 2003 hands out gateway from nic not dhcp server

  - by Pete

  I have created a pptp RRAS server for a handful of clients to connect to. I would like them to use the servers default gateway (.1) for internet access. They are able to successfully connect (& see LAN) but it then cuts them off the internet. I understand that all internet traffic would be routed through the pptp server but that's ok since I have enough pipe. The problem seems to be that: the clients gateway shows as their assigned RAS ip. The clients assigned DNS settings seem to be what is set to the servers nic not what I have specified in dhcp (which is the same server). DHCP relay agent properties points to the nic DHCP is running on (192.168.100.163). .1 is gateway in nic hw properties & dhcp. I have different dns secondary & third entries on my nic properties than what dhcp is configured for. The problem is that I have a 10.10.1.x network that people can not see if they uncheck the gateway option but, they are then unable to see our other hosted sites on the internet.

  Read the article

• VMWare Workstation 8 Disk I/O & Hard Faults

  - by Scott

  I have VMWare Workstation 8 installed on a host machine with the following specs: Intel i5 2500k CPU 16GB DDR3 1600 ram 1TB Western Digital Caviar Black HD I have two Windows 7 virtual machines configured (currently running one at a time but will be operating both at once when my 32GB RAM kit arrives in a couple days). Each one is configured with 8GB of RAM and no tweaks/performance customizations or anything done. All of the VMWare settings are the defaults. When I boot into these machines and run various programs (Visual Studio, Outlook, etc), I can hear the disk thrashing quite a bit and checking Resource Monitor, I can see that I'm getting anywhere between 300-800 hard faults per second. From the host machine, it shows they're coming from the VMWare image. If I go to the virtual machine, whatever app I'm currently loading is the image that's causing the hard faults. As I understand it, hard faults are (simply) when an address in memory has been swapped out to the page file and has to be read from the page file instead of from memory. I don't understand why this is happening though. With 8GB of ram on the guest machine and 6.5GB available, what could be causing this? I know Windows 7 supposedly improved on page file management over XP but it seems excessive for this kind of slowdown, disk thrashing and high hard fault count when I have that much free RAM. Is there anything I can to to improve the performance in my guest machines? On the host machine, I can open/run any applications at all and hard faults stays around 0 with low disk I/O.

  Read the article

• Dual-head monitor system Kubuntu 10.04

  - by andrii

  I have a notebook Asus V6X00V with 1400*1050 monitor(name: LVDS) and Dell Monitor 1920*1080 (VGA-0). I want to have a dual monitor system. At MS Windows everything is working fine. During the Kubuntu installation the Dell and the main notebook monitors have a right resolutions(1920*1080 & 1400*1050). But after some stage it have been changed to the 1152*864 for both. Now the right resolution is only during turning off process and when I am using the console. So it shows that system can use this resolutions. The problem is just in a settings. I am using Size & Orientation - System Settings for setting adjustment. Any option that changes resolution for any monitor or changing position(Absolute, Left Of, Right of and so on) cause the color line noise on the screens. I have tried xrandr: xrandr --output LVDS --mode 1400x1050 --pos 0x0 --output VGA-0 --mode 1920x1080 --right-of LVDS --pos 1400x0 but have received the same result. I have find out that for example the previous version of Randr(1.2, now I have xrandr 1.3) need a xorg.conf file modification to create a big virtual screen, but kubuntu 10.4 don't have xorg.conf and I don't know should I modify xorg for 1.3 version of xrandr or not. Please help me to solve this problem

  Read the article

• Linux disk usage analyser that acts like symlinks are real files

  - by Rory

  I am using git-annex, an extension to the DVCS git, which is designed for handling large files. It makes heavy use of symlinks. The actual large files are moved to the .git/annex directory and the original files are symlinked to there. I am running out of disk space, and need to clear up, and see what's using all my space. Usually I'd use a disk usage tool like ncdu, Baobab or Filelight. However they treat the symlink as essentially empty, and only count the file that it is pointing to as using any space. Which means when I use git-annex, it shows no space used in the main directories and lots of space used in the .git/annex directory. This is not helpful. Is there any (graphical or ncurses) based disk usage programme for linux (apt-get installable would be easie that is capable (through options or not) of counting a symlink as using up the space that the original file uses up? Many have options for different behaviour for hard links, so makes sense that some should h (I know counting symlinks as using space has flaws, like counting the space space twice, broken symlinks, etc. But that's OK for my purposes)

  Read the article

• Boot drive not found issue after cloning using Apricorn EZgig

  - by TomWilsonFL

  A couple days ago I cloned a drive for someone using the EZgig software. Usually this goes without a hitch, but this particular drive I was cloning is quite old. When I restarted with the new drive I received the typical bootable disk not found message, so I turned it off, messed with the BIOS, restarted and it came up fine. That night I was working remotely on the computer and had to restart it. It didn't come back up; not a good sign. When the user came to the computer in the morning it was giving the same message. I have found that to make the computer boot, all I have to do is go into the BIOS and "Load Defaults", then restart. It will boot and runs great. Any thoughts on what is causing this situation? Is it MBR corruption? Are some settings being saved in the CMOS? A couple points of mention: I have already attempted looking for a BIOS update for the computer, but the newest is already installed (from 2003). When the computer reboots it either shows "None" for Primary Master, or sometimes it will just not show anything. Thanks, Tom

  Read the article

• Samba access works with IP address only

  - by Sebastian Rittau

  I added a Debian etch host (hostname: webserver, IP address: 192.168.101.2) running Samba to a Windows network with a Windows 2003 PDC (IP address 192.168.101.3). The Samba server exports a public guest share, called "Intranet". The server shows up fine in the network, but trying to click on it produces an error dialog, stating I don't have the necessary permissions. So does entering \webserver manually and using \webserver\internet states that the path does not exist. Interestingly, accessing the share by IP address (\192.168.101.2 or \192.168.101.2\intranet) works fine. DNS is configured correctly, and "smbclient //webserver/intranet" on another Linux client works fine. One complicating issue is that the webserver is only a VMware virtual machine running on PDC server. Here is our smb.conf: [global] workgroup = Foobar server string = Webserver wins support = yes ; commenting out these wins server = 192.168.101.3 ; two lines has no effect dns proxy = no guest account = nobody [... snipped some unrelated bits, like logging ...] security = share [... snipped some password-related things ...] domain master = no [intranet] comment = Intranet path = /srv/webserver/contents browseable = yes guest ok = yes guest only = yes read only = yes create mask = 0775 directory mask = 0775

  Read the article

• Win/Bios showing wrong RAM in Gateway Netbook?

  - by Ael

  I've seen similar problems, but this seems slightly unique, maybe... I have a Gateway LT21 netbook, Win7. I've upgraded RAM from 1gb to 2gb. It didn't work. So I updated to the latest Bios 1.25, then it worked. 2gb was recognized in the Bios and in Windows. Every was fine. Now today it seemed slow and, to my surprise, both the Bios and Win show only 1gb. :/ I've run memory diagnostic, no error. I entered bios and hit Exit and Save. Still 1gb. I took out the ram, put it back. Still 1gb. :/ CPU-Z shows 2048mb/2gb of RAM. Further testing: if i put in the old 1gb ram, turn on, then put in the new 2gb ram again, the Bios and Win show 2gb of ram. BUT, once restarted at all (even from Bios) it seems to go back to showing incorrect 1gb ram again. :// (There are very few options in the bios, none appear memory-related.) Any ideas?

  Read the article

• My bios datetime is resetting to 2002, what should I do?

  - by Thierry Lam

  I bought my PC brand new in mid-2006. I'm currently dual booting Win XP 32 bits and Ubuntu Karmic Desktop. Over the last few days, when I boot up my computer, it tells me that my bios time is not set. I now have 2 choices for booting in: Windows first: I can safely get into Windows but the date now shows 2002/01/01 at 00:00. From there, Windows will not sync its time to its servers, I have to manually advance the date myself. I can also advance the date from the bios at startup. Ubuntu first: Since the time date is still set at 2002, the boot system cannot find my linux partition. I can fix that issue by booting to Windows, set the date properly and the linux issue will be fixed automatically. The above two issues can also be fixed if I manually set the bios date/time manually when I turn on my computer. It's annoying to do that every single day since I shut down my PC daily. Am I having an OS issue or a hardware issue? How can I resolve this problem?

  Read the article

• Ubuntu Natty 11.04, Turning the wireless switch off; switches it off permanently!

  - by ZiGi

  i'm using an hp pavilion dv2000 i turned the wifi switch off by mistake, the LED turned orange and the wifi got disconnected. and now when i turn the switch on, it remains orange and the wifi still isn't functional. this happened before; i found a fix that worked searching google. it was done via terminal commands and i didn't have to download anything but i can't find the solution anymore! wlan0 shows up when i use: :~$iwconfig #BLA BLA BLA #... wlan0 IEEE 802.11abg ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=off Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off more results: :~$ sudo ifconfig wlan0 up SIOCSIFFLAGS: Operation not possible due to RF-kill :~$ rfkill list all 1: phy0: WirelessLAN Soft blocked: yes Hard blocked: yes :~$ sudo rfkill unblock all :~$ rfkill list all 1: phy0: WirelessLAN Soft blocked: no Hard blocked: yes :~$ sudo ifconfig wlan0 up SIOCSIFFLAGS: Operation not possible due to RF-kill it's still hard blocked! even though the switch is turned on; gives the same result eitherways a direction to a page with a working solution is a much appreciated answer!

  Read the article

• TEMP environment variable occasionally set incorrectly

  - by Roger Lipscombe

  Occasionally, I find my TEMP and TMP environment variables set to C:\Windows\TEMP. They should be set to %USERPROFILE%\AppData\Local\Temp, and are configured correctly in System Properties. This manifests itself as error messages like the following: ---> System.InvalidOperationException: Unable to generate a temporary class (result=1). error CS2001: Source file 'C:\Windows\TEMP\gb_pz65v.0.cs' could not be found error CS2008: No inputs specified ...which occurs in various .NET applications (in particular Visual Studio 2010 or SQL Server Management Studio). Alternatively, SQL Server Management Studio will report: Value cannot be null. Parameter name: viewInfo (Microsoft.SqlServer.Management.SqlStudio.Explorer) If I run PowerShell elevated, then $env:TEMP is set correctly. If I run PowerShell non-elevated, then it's not. I believe that it should be set correctly in both cases. If not, it's the wrong way round. The same is true for CMD.EXE. Rebooting fixes it, temporarily, until something breaks it again. Presumably something loaded into Explorer.exe is messing with its environment variables, but what? The values in the registry are correct, even while this is happening: HKLM\SYSTEM\CurrentControlSet\Control\Session Manager\Environment has TEMP = %SYSTEMROOT%\Temp HKCU\Environment has TEMP = %USERPROFILE%\AppData\Local\Temp By setting a breakpoint on shell32!RegenerateUserEnvironment, I'm able to trap it when it happens, but I still don't know why explorer.exe is reading the wrong environment variables. I can reproduce it consistently by broadcasting a WM_SETTINGCHANGE message (I wrote a one-line C++ program to do this). Watching the activity in Process Monitor shows that explorer.exe doesn't even look at HKCU\Environment. What is going on?

  Read the article

• Linux Software RAID1: How to boot after (physically) removing /dev/sda? (LVM, mdadm, Grub2)

  - by flight

  A server set up with Debian 6.0/squeeze. During the squeeze installation, I configured the two 500GB SATA disks (/dev/sda and /dev/sdb) as a RAID1 (managed with mdadm). The RAID keeps a 500 GB LVM volume group (vg0). In the volume group, there's a single logical volume (lv0). vg0-lv0 is formatted with extfs3 and mounted as root partition (no dedicated /boot partition). The system boots using GRUB2. In normal use, the systems boots fine. Also, when I tried and removed the second SATA drive (/dev/sdb) after a shutdown, the system came up without problem, and after reconnecting the drive, I was able to --re-add /dev/sdb1 to the RAID array. But: After removing the first SATA drive (/dev/sda), the system won't boot any more! A GRUB welcome message shows up for a second, then the system reboots. I tried to install GRUB2 manually on /dev/sdb ("grub-install /dev/sdb"), but that doesn't help. Appearently squeeze fails to set up GRUB2 to launch from the second disk when the first disk is removed, which seems to be quite an essential feature when running this kind of Software RAID1, isn't it? At the moment, I'm lost whether this is a problem with GRUB2, with LVM or with the RAID setup. Any hints?

  Read the article

< Previous Page | 457 458 459 460 461 462 463 464 465 466 467 468  | Next Page >