Search Results

Search found 47660 results on 1907 pages for 'name resolution'.

Page 462/1907 | < Previous Page | 458 459 460 461 462 463 464 465 466 467 468 469  | Next Page >

• A story of Murphy&ndash;my technical issues at TechDays Switzerland #chtd

  - by Laurent Bugnion

  I had two sessions at the recent Swiss TechDays. While the first one (Advanced Development for Windows Phone 8) went extremely well (I think), I had a very annoying technical issue in the beginning of my second session. First let me add that I talked to Microsoft about that and I hope they will change a few things in the room assignment for next year. My two sessions were one right after the other, with only 15 minutes break to change room. I don’t mind having two sessions so close from each other, but I would really like them to be in the same room in order to avoid having to move my laptops (plural, that will become important later) and redoing the tech check. That being said, I am guilty of not checking where my talks would be before the day before the conference, and when I did notice, it was too late to change it. After my first session, I quickly moved to the other room and setup my main laptop, a Dell Precision. We tested the video output (VGA) and didn’t notice anything special. The projectors are using a fairly high resolution (kudos to the Basel conference center for not having old school 1024x768 projectors anymore, that makes Blend really hard to demo ;) but since everything went great during the first talk, I was not worried. In fact I even had some time to chat with some early attendees about my Microsoft Surface and the Samsung Slate 7, which I had carried with me in addition to the Precision. I just thought it would be nice to show the hardware that Windows 8 can run on, without thinking any further. When the session started, I immediately noticed that the main screen was not showing anything. I thought I had just forgotten to switch to “duplicate” for the video output, and did that with a quick Win-P. However it didn’t “hold”. After 2 seconds, it reverted back to a black display for my attendees. Then I started to really worry. We tried everything, switching from VGA to HDMI, changing the resolution, setting the projector as primary display, but nothing did the trick. The projector was just refusing to show my screen. Now, to show you how despaired I started to be, I even considered using the “extend” setting (which worked just fine), and to use one of the feedback monitors on the floor but really it was super cumbersome. Eventually, my last resort arrived: I started my Samsung Slate 7, which by chance has Visual Studio 12 and Blend 5 installed, plugged the HDMI projector in the dock (yes, I had the dock with me, which I usually don’t!), connected it to internet (had to enter a long password for that), loaded the source code from my main machine using a USB stick and…. finally started to give my presentation. All in all I think we lost about 10 minutes. Amongst the most horrible minutes of my whole life, truly (yes I am blessed, I didn’t have that many horrible minutes in my life ;) I really want to apologize to my attendees. We joked a bit during the attempts to resolve the issue, the reactions I had after the session were all very nice and sympathetic. Only a handful of people left my session while I was having the issues, and I really don’t blame them (who knew how long the problem would last!!). But still, I probably talked at more than 60 sessions over the years, and this was by far my most painful moment. What did I learn? So what did I learn from this? Well from now on I will always have my slate ready with the latest source code, internet connection and every tool I might need during the presentation. This way, if I detect even a hint that the Precision might not work, I will just switch to the Slate. The experience of presenting on the slate is actually not bad at all, it is just a bit slow for my taste, but it does work. By the way, I will be posting the code and slides for my sessions very soon, I just need to “clean it and zip it”. Stay tuned, and thanks again for your patience in that horrible circumstance. Cheers Laurent   Laurent Bugnion (GalaSoft) Subscribe | Twitter | Facebook | Flickr | LinkedIn

  Read the article

• How to ace Skype Interviews

  - by FelixWehmeyer

  Many companies these days opt to include a Skype interview in the recruitment process, as it comes close to a face-to-face interview without the time and costs involved for both the company and the candidate. In some cases during the recruitment process at Oracle you also might be asked to conduct a Skype interview. To help you get started with this, we researched some websites to give you several tips and tricks. What most of the bloggers say about this topic is collected in this article to help you prepare. It is all about Technology The bit that can make a Skype interview more complicated than a face-to-face or phone interview is the fact you are using additional technology. Always check the video and audio capabilities of your computer to make sure they work properly. Be prepared for connections to be limited during the interview. Using a webcam can also be confusing, if you do not have a lot of experience using it. Make sure you look at the camera and not the monitor to avoid the impression you are looking away. Practice If you do not feel comfortable using the camera, do a mock interview with a friend or family member before you have the actual interview. Be aware that facial impressions or reactions come across differently on a monitor, so make sure to practice how you  come across during the interview. Good lighting in the room also helps you make you look the best for the interviewer. You and your room Dress code, as in any face-to-face interview,is important to think about. Dress the same way as you would for face-to-face interviews and avoid patterns or informal clothing. Another tip,is to be aware of your surroundings. Make sure the room you use looks good on camera, making sure it is neat and tidy, also think about how the walls look behind you. Also make sure you do not get distracted during the interview by anyone or anything, as this will directly have an impact on your interview and your ability to focus and concentrate. What is in a name What goes for any account that you share during the recruitment process, either your email address or Skype name, is to make sure it comes across as professional. Try to avoid using nicknames or strange words in your accounts, stick to using a first name – last name or an abbreviation of the same. If you would like to read more about this topic, have a look at the links below which we used as inspiration for this blog article. 7 Deadly Skype Interview Sins is fun to read and to gives you some good advice to keep in mind. ·         http://www.inc.com/guides/201103/4-tips-for-conducting-a-job-interview-using-skype.html ·         http://blog.simplyhired.com/2012/05/5-tips-to-a-great-skype-interview.html ·         http://www.cnn.com/2011/LIVING/07/11/skype.interview.tips.cb/index.html http://www.ehow.com/how_5648281_prepare-skype-interview.html

  Read the article

• "previousMode": Controling the Pin Action of a TopComponent

  - by Geertjan

  An excellent thing I learned today is that you, as a developer of a NetBeans module or NetBeans Platform application, can control the pin button. Up until today, whenever I had a TopComponent defined to appear in "rightSlidingSide" mode and then I clicked the "pin" button, as shown here... ...the TopComponent would then find itself pinned in the "explorer" mode. Would make more sense if it would be pinned in the "properties" mode, which is the docked mode closest to the "rightSlidingSide" mode. Not being able to control the "pin" button has been a recurring question (including in my own head) over several years. But the NetBeans Team's window system guru Stan Aubrecht informed me today that a "previousMode" attribute exists in the "tc-ref" file of the TopComponent. Since a few releases, that file is generated via the annotations in the TopComponent. However, "previousMode" is currently not one of the attributes exposed by the @TopComponent.Registration annotation. Therefore, what I did was this: Set "rightSlidingSide" in the "mode" attribute of the @TopComponent.Registration. Build the module. Find the "generated-layer.xml" (in the Files window) and move the layer registration of the TopComponent, including its action and menu item for opening the TopComponent, into my own manual layer within the module. Then remove all the TopComponent annotations from the TopComponent, though you can keep @ConvertAsProperties and @Messages. Then add the "previousMode" attribute, as highlighted below, into my own layer file, i.e., within the tags copied from the "generated-layer.xml": <folder name="Modes"> <folder name="rightSlidingSide"> <file name="ComparatorTopComponent.wstcref"> <![CDATA[<?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE tc-ref PUBLIC "-//NetBeans//DTD Top Component in Mode Properties 2.0//EN" "http://www.netbeans.org/dtds/tc-ref2_0.dtd"> <tc-ref version="2.0"> <tc-id id="ComparatorTopComponent"/> <state opened="false"/> <previousMode name="properties" index="0" /> </tc-ref> ]]> </file> </folder> </folder> Now when you run the application and pin the specific TopComponent defined above, i.e., in the above case, named "ComparatorTopComponent", you will find it is pinned into the "properties" mode! That's pretty cool and if you agree, then you're a pretty cool NetBeans Platform developer, and I'd love to find out more about the application/s you're creating on the NetBeans Platform! Meanwhile, I'm going to create an issue for exposing the "previousMode" attribute in the @TopComponent.Registration annotation.

  Read the article

• Migrating a WebLogic Domain from a 32 to a 64 bit JVM/Architecture

  - by adejuanc

  Currently on 32 bit OS which presents a physical constraint when trying to allocate memory. By limit, a 32 bit OS, will not be able to allocate more than 3 GB on a Linux environment, or 2 GB for Windows environment (not considering Physical Address Extension (PAE) implementation, which can increase the maximum allocatable memory). When this limit is reached, a migration to a 64 bit architecture is recommended. Below are the steps on how to install a 64 WebLogic Server version, along with a 64 Bit JVM and then how to migrate the domain to this new environment. Weblogic Server Version: WebLogic Server Version: 10.3.4.0 OS: Linux adejuan-cl.cl.oracle.com 2.6.18-194.el5 #1 SMP Mon Jan 01 22:10:29 EDT 2010 x86_64 x86_64 x86_64 GNU/Linux JVM:java version "1.6.0_22" Java(TM) SE Runtime Environment (build 1.6.0_22-b04) Oracle JRockit(R) (build R28.1.1-13-139783-1.6.0_22-20101206-0136-linux-x86_64, compiled mode) To create migration template: 1. Execute $<WLS_HOME>/wlserver_10.3/common/bin/config_builder.sh 2. Create Domain Template. 3. Select Domain to migrate. 4. Enter the name of template and other info. Click next. 5. Using Add Button, Select libraries you want to add under lib folder. copy jdbc data sources you would like to have under config/jdbc folder. If you want to have log4j configuration, copy log4j.xml under domain_root folder. 6. Select data base for the domain and click next. 7. Enter Admin Server Name and port numbers. Click next. 8. Enter username and password. Click next. Select No if you don want to add users/groups/roles 9. Click next until reach button create. This will create a jar file that is needed for the next action plan. To install and migrate domain to 64 bit architecture. 1. Install JVM Jrockit R28.1.1.13 on environment. (uncompress zip folder on a known location) 2. Go to JRockit_Home/bin and execute $ java -d64 -jar wls1034_generic.jar 3. When prompt, select JRockit JVM in browse menu, and wait for installation to finish. 4. Go to <WLS_HOME>/wlserver_10.3/common/bin and execute $ ./config.sh 5. Select Create a new Weblogic domain 6. Select Base this domain on an existing template and select browse. 7. Select jar file created on previous action plan. 8. Select Name of domain. Maintain in most cases. 9. Select user name and password. Maintain in most cases. 10. Select Jrockit SDK 1.6.0_22 and click next. 11. Confirm all JMS/JDBC/security configuration. 12. On select Optional Configuration, reconfigure if necessary. 13. Check on Configuration summary for all domain configuration. 14. Click on create, to finish up domain import. Note: Always when installing a 64 bit WLS, it's necessary to install first the 64 JVM and then run the generic installer with the -d64 bit option. If this is not performed, the installation will be the 32 default version. For more information, please refer: http://download.oracle.com/docs/cd/E13188_01/jrockit/docs50/dev_faq.html#pae

  Read the article

• Velocity collision detection (2D)

  - by ultifinitus

  Alright, so I have made a simple game engine (see youtube) And my current implementation of collision resolution has a slight problem, involving the velocity of a platform. Basically I run through all of the objects necessary to detect collisions on and resolve those collisions as I find them. Part of that resolution is setting the player's velocity = the platform's velocity. Which works great! Unless I have a row of platforms moving at different velocities or a platform between a stack of tiles.... (current system) bool player::handle_collisions() { collisions tcol; bool did_handle = false; bool thisObjectHandle = false; for (int temp = 0; temp < collideQueue.size(); temp++) { thisObjectHandle = false; tcol = get_collision(prevPos.x,y,get_img()->get_width(),get_img()->get_height(), collideQueue[temp]->get_position().x,collideQueue[temp]->get_position().y, collideQueue[temp]->get_img()->get_width(),collideQueue[temp]->get_img()->get_height()); if (prevPos.y >= collideQueue[temp]->get_prev_pos().y + collideQueue[temp]->get_img()->get_height()) if (tcol.top > 0) { add_pos(0,tcol.top); set_vel(get_vel().x,collideQueue[temp]->get_vel().y); thisObjectHandle = did_handle = true; } if (prevPos.y + get_img()->get_height() <= collideQueue[temp]->get_prev_pos().y) if (tcol.bottom > 0) { add_pos(collideQueue[temp]->get_vel().x,-tcol.bottom); set_vel(get_vel().x/*collideQueue[temp]->get_vel().x*/,collideQueue[temp]->get_vel().y); ableToJump = true; jumpTimes = maxjumpable; thisObjectHandle = did_handle = true; } /// /// ADD CODE FROM NEXT CODE BLOCK HERE (on forum, not in code) /// } for (int temp = 0; temp < collideQueue.size(); temp++) { thisObjectHandle = false; tcol = get_collision(x,y,get_img()->get_width(),get_img()->get_height(), collideQueue[temp]->get_position().x,collideQueue[temp]->get_position().y, collideQueue[temp]->get_img()->get_width(),collideQueue[temp]->get_img()->get_height()); if (prevPos.x + get_img()->get_width() <= collideQueue[temp]->get_prev_pos().x) if (tcol.left > 0) { add_pos(-tcol.left,0); set_vel(collideQueue[temp]->get_vel().x,get_vel().y); thisObjectHandle = did_handle = true; } if (prevPos.x >= collideQueue[temp]->get_prev_pos().x + collideQueue[temp]->get_img()->get_width()) if (tcol.right > 0) { add_pos(tcol.right,0); set_vel(collideQueue[temp]->get_vel().x,get_vel().y); thisObjectHandle = did_handle = true; } } return did_handle; } (if I add the following code {where the comment to do so is}, which is glitchy, the above problem doesn't happen, though it brings others) if (!thisObjectHandle) { if (tcol.bottom > tcol.top) { add_pos(collideQueue[temp]->get_vel().x,-tcol.bottom); set_vel(get_vel().x,collideQueue[temp]->get_vel().y); } else if (tcol.top > tcol.bottom) { add_pos(0,tcol.top); set_vel(get_vel().x,collideQueue[temp]->get_vel().y); } } How would you change my system to prevent this?

  Read the article

• How do I cap rendering of tiles in a 2D game with SDL?

  - by farmdve

  I have some boilerplate code working, I basically have a tile based map composed of just 3 colors, and some walls and render with SDL. The tiles are in a bmp file, but each tile inside it corresponds to an internal number of the type of tile(color, or wall). I have pretty basic collision detection and it works, I can also detetc continuous presses, which allows me to move pretty much anywhere I want. I also have a moving camera, which follows the object. The problem is that, the tile based map is bigger than the resolution, thus not all of the map can be displayed on the screen, but it's still rendered. I would like to cap it, but since this is new to me, I pretty much have no idea. Although I cannot post all the code, as even though I am a newbie and the code pretty basic, it's already quite a few lines, I can post what I tried to do void set_camera() { //Center the camera over the dot camera.x = ( player.box.x + DOT_WIDTH / 2 ) - SCREEN_WIDTH / 2; camera.y = ( player.box.y + DOT_HEIGHT / 2 ) - SCREEN_HEIGHT / 2; //Keep the camera in bounds. if(camera.x < 0 ) { camera.x = 0; } if(camera.y < 0 ) { camera.y = 0; } if(camera.x > LEVEL_WIDTH - camera.w ) { camera.x = LEVEL_WIDTH - camera.w; } if(camera.y > LEVEL_HEIGHT - camera.h ) { camera.y = LEVEL_HEIGHT - camera.h; } } set_camera() is the function which calculates the camera position based on the player's positions. I won't pretend I know much about it. Rectangle box = {0,0,0,0}; for(int t = 0; t < TOTAL_TILES; t++) { if(box.x < (camera.x - TILE_WIDTH) || box.y > (camera.y - TILE_HEIGHT)) apply_surface(box.x - camera.x, box.y - camera.y, surface, screen, &clips[tiles[t]]); box.x += TILE_WIDTH; //If we've gone too far if(box.x >= LEVEL_WIDTH) { //Move back box.x = 0; //Move to the next row box.y += TILE_HEIGHT; } } This is basically my render code. The for loop loops over 192 tiles stored in an int array, each with their own unique value describing the tile type(wall or one of three possible colored tiles). box is an SDL_Rect containing the current position of the tile, which is calculated on render. TILE_HEIGHT and TILE_WIDTH are of value 80. So the cap is determined by if(box.x < (camera.x - TILE_WIDTH) || box.y > (camera.y - TILE_HEIGHT)) However, this is just me playing with the values and see what doesn't break it. I pretty much have no idea how to calculate it. My screen resolution is 1024/768, and the tile map is of size 1280/960.

  Read the article

• Converting a GameObject method call from UnityScript to C#

  - by Crims0n_

  Here is the UnityScript implementation of the method i use to generate a randomly tiled background, the problem i'm having relates to how to translate the call to the newTile method in c#, so far i've had no luck fiddling... can anyone point me in the correct direction? Thanks #pragma strict import System.Collections.Generic; var mapSizeX : int; var mapSizeY : int; var xOffset : float; var yOffset : float; var tilePrefab : GameObject; var tilePrefab2 : GameObject; var tiles : List.<Transform> = new List.<Transform>(); function Start () { var i : int = 0; var xIndex : int = 0; var yIndex : int = 0; xOffset = 2.69; yOffset = -1.97; while(yIndex < mapSizeY){ xIndex = 0; while(xIndex < mapSizeX){ var z = Random.Range(0, 5); if (z > 2) { var newTile : GameObject = Instantiate (tilePrefab, Vector3(xIndex*0.64 - (xOffset * (mapSizeX/10)), yIndex*-0.64 - (yOffset * (mapSizeY/10)), 0), Quaternion.identity); tiles.Add(newTile.transform); newTile.transform.parent = transform; newTile.transform.name = "tile_"+i; i++; xIndex++; } if (z < 2) { var newTile2 : GameObject = Instantiate (tilePrefab2, Vector3(xIndex*0.64 - (xOffset * (mapSizeX/10)), yIndex*-0.64 - (yOffset * (mapSizeY/10)), 0), Quaternion.identity); tiles.Add(newTile2.transform); newTile2.transform.parent = transform; newTile2.transform.name = "Ztile_"+i; i++; xIndex++; } } yIndex++; } } C# Version [Fixed] using UnityEngine; using System.Collections; public class LevelGen : MonoBehaviour { public int mapSizeX; public int mapSizeY; public float xOffset; public float yOffset; public GameObject tilePrefab; public GameObject tilePrefab2; int i; public System.Collections.Generic.List<Transform> tiles = new System.Collections.Generic.List<Transform>(); // Use this for initialization void Start () { int i = 0; int xIndex = 0; int yIndex = 0; xOffset = 1.58f; yOffset = -1.156f; while (yIndex < mapSizeY) { xIndex = 0; while(xIndex < mapSizeX) { int z = Random.Range(0, 5); if (z > 5) { GameObject newTile = (GameObject)Instantiate(tilePrefab, new Vector3(xIndex*0.64f - (xOffset * (mapSizeX/10.0f)), yIndex*-0.64f - (yOffset * (mapSizeY/10.0f)), 0), Quaternion.identity); tiles.Add(newTile.transform); newTile.transform.parent = transform; newTile.transform.name = "tile_"+i; i++; xIndex++; } if (z < 5) { GameObject newTile2 = (GameObject)Instantiate(tilePrefab, new Vector3(xIndex*0.64f - (xOffset * (mapSizeX/10.0f)), yIndex*-0.64f - (yOffset * (mapSizeY/10.0f)), 0), Quaternion.identity); tiles.Add(newTile2.transform); newTile2.transform.parent = transform; newTile2.transform.name = "tile2_"+i; i++; xIndex++; } } yIndex++; } } // Update is called once per frame void Update () { } }

  Read the article

• Rotating WebLogic Server logs to avoid large files using WLST.

  - by adejuanc

  By default, when WebLogic Server instances are started in development mode, the server automatically renames (rotates) its local server log file as SERVER_NAME.log.n.  For the remainder of the server session, log messages accumulate in SERVER_NAME.log until the file grows to a size of 500 kilobytes.Each time the server log file reaches this size, the server renames the log file and creates a new SERVER_NAME.log to store new messages. By default, the rotated log files are numbered in order of creation filenamennnnn, where filename is the name configured for the log file. You can configure a server instance to include a time and date stamp in the file name of rotated log files; for example, server-name-%yyyy%-%mm%-%dd%-%hh%-%mm%.log.By default, when server instances are started in production mode, the server rotates its server log file whenever the file grows to 5000 kilobytes in size. It does not rotate the local server log file when the server is started. For more information about changing the mode in which a server starts, see Change to production mode in the Administration Console Online Help.You can change these default settings for log file rotation. For example, you can change the file size at which the server rotates the log file or you can configure a server to rotate log files based on a time interval. You can also specify the maximum number of rotated files that can accumulate. After the number of log files reaches this number, subsequent file rotations delete the oldest log file and create a new log file with the latest suffix.  Note: WebLogic Server sets a threshold size limit of 500 MB before it forces a hard rotation to prevent excessive log file growth. To Rotate via WLST : #invoke WLSTC:\>java weblogic.WLST#connect WLST to an Administration Serverawls:/offline> connect('username','password')#navigate to the ServerRuntime MBean hierarchywls:/mydomain/serverConfig> serverRuntime()wls:/mydomain/serverRuntime>ls()#navigate to the server LogRuntimeMBeanwls:/mydomain/serverRuntime> cd('LogRuntime/myserver')wls:/mydomain/serverRuntime/LogRuntime/myserver> ls()-r-- Name myserver-r-- Type LogRuntime-r-x forceLogRotation java.lang.Void :#force the immediate rotation of the server log filewls:/mydomain/serverRuntime/LogRuntime/myserver> cmo.forceLogRotation()wls:/mydomain/serverRuntime/LogRuntime/myserver> The server immediately rotates the file and prints the following message: <Mar 2, 2012 3:23:01 PM EST> <Info> <Log Management> <BEA-170017> <The log file C:\diablodomain\servers\myserver\logs\myserver.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.><Mar 2, 2012 3:23:01 PM EST> <Info> <Log Management> <BEA-170018> <The log file has been rotated to C:\diablodomain\servers\myserver\logs\myserver.log00001. Log messages will continue to be logged in C:\diablodomain\servers\myserver\logs\myserver.log.> To specify the Location of the archived Log Files The following command specifies the directory location for the archived log files using the -Dweblogic.log.LogFileRotationDir Java startup option: java -Dweblogic.log.LogFileRotationDir=c:\foo-Dweblogic.management.username=installadministrator-Dweblogic.management.password=installadministrator weblogic.Server For more information read the following documentation ; Using the WebLogic Scripting Tool http://download.oracle.com/docs/cd/E13222_01/wls/docs103/config_scripting/using_WLST.html Configuring WebLogic Logging Services http://download.oracle.com/docs/cd/E12840_01/wls/docs103/logging/config_logs.html

  Read the article

• Working Towards Specialization? Your VAD Can Help You Score!

  - by Kristin Rose

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman","serif";} TOUCH DOWN! That’s right folks, football is in full swing and what better way to kickoff football season than with a great Oracle play? Partners can now score big by side passing the ball to their VADs, enabling them to help in the process of becoming a Specialized partner. With the new functionality now available on the OPN Competency Center, Partner PRM Administrators can grant access to their VADs and have them assist in achieving their Specialization requirements. Here are the rules of the game: Partner Administrator must provide authorization Details do not include individual users data Access can be removed anytime Follow the steps below to grant your VAD access to your company Specialization progress reports. It’s as simple as 1,2,3…Go team go! Login to the OPN Competency Center and go to “My Preferences” on the top right corner of the screen. Under “My VAD”, select your Region, Country and Value Added Distributor name, then simple click in “ADD VAD”. Your VAD can now access your Specialization Tracker report! For those MVP’s who want to learn more, be sure to watch this 3 minute play by play video on the new OPN Competency Center VAD/VAR Specialization Tracker below, and click here before game day! Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman","serif";} Are You Ready For Some Oracle Football? The OPN Communications Team Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman","serif";}

  Read the article

• PowerShell Script To Find Where SharePoint 2007 Features Are Activated

  - by Brian T. Jackett

  Recently I posted a script to find where SharePoint 2010 Features Are Activated.  I built the original version to use SharePoint 2010 PowerShell commandlets as that saved me a number of steps for filtering and gathering features at each level.  If there was ever demand for a 2007 version I could modify the script to handle that by using the object model instead of commandlets.  Just the other week a fellow SharePoint PFE Jason Gallicchio had a customer asking about a version for SharePoint 2007.  With a little bit of work I was able to convert the script to work against SharePoint 2007.   Solution    Below is the converted script that works against a SharePoint 2007 farm.  Note: There appears to be a bug with the 2007 version that does not give accurate results against a SharePoint 2010 farm.  I ran the 2007 version against a 2010 farm and got fewer results than my 2010 version of the script.  Discussing with some fellow PFEs I think the discrepancy may be due to sandboxed features, a new concept in SharePoint 2010.  I have not had enough time to test or confirm.  For the time being only use the 2007 version script against SharePoint 2007 farms and the 2010 version against SharePoint 2010 farms.    Note: This script is not optimized for medium to large farms.  In my testing it took 1-3 minutes to recurse through my demo environment.  This script is provided as-is with no warranty.  Run this in a smaller dev / test environment first. 001 002 003 004 005 006 007 008 009 010 011 012 013 014 015 016 017 018 019 020 021 022 023 024 025 026 027 028 029 030 031 032 033 034 035 036 037 038 039 040 041 042 043 044 045 046 047 048 049 050 051 052 053 054 055 056 057 058 059 060 061 062 063 064 065 066 067 068 069 070 function Get-SPFeatureActivated { # see full script for help info, removed for formatting [CmdletBinding()] param(     [Parameter(position = 1, valueFromPipeline=$true)]     [string]     $Identity )#end param     Begin     {         # load SharePoint assembly to access object model         [void][System.Reflection.Assembly]::LoadWithPartialName("Microsoft.SharePoint")             # declare empty array to hold results. Will add custom member for Url to show where activated at on objects returned from Get-SPFeature.         $results = @()                 $params = @{}     }     Process     {         if([string]::IsNullOrEmpty($Identity) -eq $false)         {             $params = @{Identity = $Identity}         }                 # create hashtable of farm features to lookup definition ids later         $farm = [Microsoft.SharePoint.Administration.SPFarm]::Local                         # check farm features         $results += ($farm.FeatureDefinitions | Where-Object {$_.Scope -eq "Farm"} | Where-Object {[string]::IsNullOrEmpty($Identity) -or ($_.DisplayName -eq $Identity)} |                          % {Add-Member -InputObject $_ -MemberType noteproperty -Name Url -Value ([string]::Empty) -PassThru} |                          Select-Object -Property Scope, DisplayName, Id, Url)                 # check web application features         $contentWebAppServices = $farm.services | ? {$_.typename -like "Windows SharePoint Services Web Application"}                 foreach($webApp in $contentWebAppServices.WebApplications)         {             $results += ($webApp.Features | Select-Object -ExpandProperty Definition | Where-Object {[string]::IsNullOrEmpty($Identity) -or ($_.DisplayName -eq $Identity)} |                          % {Add-Member -InputObject $_ -MemberType noteproperty -Name Url -Value $webApp.GetResponseUri(0).AbsoluteUri -PassThru} |                          Select-Object -Property Scope, DisplayName, Id, Url)                         # check site collection features in current web app             foreach($site in ($webApp.Sites))             {                 $results += ($site.Features | Select-Object -ExpandProperty Definition | Where-Object {[string]::IsNullOrEmpty($Identity) -or ($_.DisplayName -eq $Identity)} |                                  % {Add-Member -InputObject $_ -MemberType noteproperty -Name Url -Value $site.Url -PassThru} |                                  Select-Object -Property Scope, DisplayName, Id, Url)                                 # check site features in current site collection                 foreach($web in ($site.AllWebs))                 {                     $results += ($web.Features | Select-Object -ExpandProperty Definition | Where-Object {[string]::IsNullOrEmpty($Identity) -or ($_.DisplayName -eq $Identity)} |                                      % {Add-Member -InputObject $_ -MemberType noteproperty -Name Url -Value $web.Url -PassThru} |                                      Select-Object -Property Scope, DisplayName, Id, Url)                                                        $web.Dispose()                 }                 $site.Dispose()             }         }     }     End     {         $results     } } #end Get-SPFeatureActivated Get-SPFeatureActivated   Conclusion    I have posted this script to the TechNet Script Repository (click here).  As always I appreciate any feedback on scripts.  If anyone is motivated to run this 2007 version script against a SharePoint 2010 to see if they find any differences in number of features reported versus what they get with the 2010 version script I’d love to hear from you.         -Frog Out

  Read the article

• PowerShell and SMO – be careful how you iterate

  - by Fatherjack

  I’ve yet to have a totally smooth experience with PowerShell and it was late on Friday when I crashed into this problem. I haven’t investigated if this is a generally well understood circumstance and if it is then I apologise for repeating everything. Scenario: I wanted to scan a number of server for many properties, including existing logins and to identify which accounts are bestowed with sysadmin privileges. A great task to pass to PowerShell, so with a heavy heart I started up PowerShellISE and started typing. The script doesn’t come easily to me but I follow the logic of SMO and the properties and methods available with the language so it seemed something I should be able to master. Version #1 of my script. And the results it returns when executed against my home laptop server. These results looked good and for a long time I was concerned with other parts of the script, for all intents and purposes quite happy that this was an accurate assessment of the server. Let’s just review my logic for each step of the code at the top. Lines 1 to 7 just set up our variables and write out the header message Line 8 our first loop, to go through each login on the server Line 10 an inner loop that will assess each role name that each login has been assigned Line 11 a test to see if each role has the name ‘sysadmin’ Line 13 write out the login name with a bright format as it is a sysadmin login Line 17 write out the login name with no formatting It is quite possible that here someone with more PowerShell experience than me will be shouting at their screen pointing at the error I made but to me this made total sense. Until I altered the code, I altered lines 6 and 7 of code above to be: $c = $Svr.Logins.Count write-host “There are $c Logins on the server” This changed my output to look like this: This started alarm bells ringing – there are clearly not 13 logins listed So, let’s see where things are going wrong, edit the script so it looks like this. I’ve highlighted the changes to make Running this code shows me these results Our $n variable should count up by one for each login returned and We are clearly missing some logins. I referenced this list back to Management Studio for my server and see the Logins as below, where there are clearly 13 logins. We see a Login called Annette in SSMS but not in the script results so I opened that up and looked at its properties and it’s server roles in particular. The account has only public access to the server. Inspection of the other logins that the PowerShell script misses out show they too are only members of the public role. Right now I can’t work out whether there is a good reason for this and if it should be expected behaviour or not. Please spend a few minutes to leave a comment if you have an opinion or theory for this. How to get the full list of logins. Clearly I needed to get a full list of the logins so set about reviewing my code to see if there was a better way to iterate through the roles for each login. This is the code that I came up with and I think it is doing everything that I need it to. It gives me the expected results like this: So it seems that the ListMembers() method is the trouble maker in my first versions of the code. I would have expected that ListMembers should return Logins that are only members of the public role, certainly Technet makes no reference to it being left out in it’s Login.ListMembers details. Suffice to say, it’s a lesson learned and I will approach using it with caution in future circumstances.

  Read the article

• With a little effort you can &ldquo;SEMI&rdquo;-protect your C# assemblies with obfuscation.

  - by mbcrump

  This method will not protect your assemblies from a experienced hacker. Everyday we see new keygens, cracks, serials being released that contain ways around copy protection from small companies. This is a simple process that will make a lot of hackers quit because so many others use nothing. If you were a thief would you pick the house that has security signs and an alarm or one that has nothing? To so begin: Obfuscation is the concealment of meaning in communication, making it confusing and harder to interpret. Lets begin by looking at the cartoon below:     You are probably familiar with the term and probably ignored this like most programmers ignore user security. Today, I’m going to show you reflection and a way to obfuscate it. Please understand that I am aware of ways around this, but I believe some security is better than no security.  In this sample program below, the code appears exactly as it does in Visual Studio. When the program runs, you get either a true or false in a console window. Sample Program. using System; using System.Diagnostics; using System.Linq;   namespace ObfuscateMe {     class Program     {                static void Main(string[] args)         {               Console.WriteLine(IsProcessOpen("notepad")); //Returns a True or False depending if you have notepad running.             Console.ReadLine();         }             public static bool IsProcessOpen(string name)         {             return Process.GetProcesses().Any(clsProcess => clsProcess.ProcessName.Contains(name));         }     } }   Pretend, that this is a commercial application. The hacker will only have the executable and maybe a few config files, etc. After reviewing the executable, he can determine if it was produced in .NET by examing the file in ILDASM or Redgate’s Reflector. We are going to examine the file using RedGate’s Reflector. Upon launch, we simply drag/drop the exe over to the application. We have the following for the Main method:   and for the IsProcessOpen method:     Without any other knowledge as to how this works, the hacker could export the exe and get vs project build or copy this code in and our application would run. Using Reflector output. using System; using System.Diagnostics; using System.Linq;   namespace ObfuscateMe {     class Program     {                static void Main(string[] args)         {               Console.WriteLine(IsProcessOpen("notepad"));             Console.ReadLine();         }             public static bool IsProcessOpen(string name)         {             return Process.GetProcesses().Any<Process>(delegate(Process clsProcess)             {                 return clsProcess.ProcessName.Contains(name);             });         }       } } The code is not identical, but returns the same value. At this point, with a little bit of effort you could prevent the hacker from reverse engineering your code so quickly by using Eazfuscator.NET. Eazfuscator.NET is just one of many programs built for this. Visual Studio ships with a community version of Dotfoscutor. So download and load Eazfuscator.NET and drag/drop your exectuable/project into the window. It will work for a few minutes depending if you have a quad-core or not. After it finishes, open the executable in RedGate Reflector and you will get the following: Main After Obfuscation IsProcessOpen Method after obfuscation: As you can see with the jumbled characters, it is not as easy as the first example. I am aware of methods around this, but it takes more effort and unless the hacker is up for the challenge, they will just pick another program. This is also helpful if you are a consultant and make clients pay a yearly license fee. This would prevent the average software developer from jumping into your security routine after you have left. I hope this article helped someone. If you have any feedback, please leave it in the comments below.

  Read the article

• Pro/con of using Angular directives for complex form validation/ GUI manipulation

  - by tengen

  I am building a new SPA front end to replace an existing enterprise's legacy hodgepodge of systems that are outdated and in need of updating. I am new to angular, and wanted to see if the community could give me some perspective. I'll state my problem, and then ask my question. I have to generate several series of check boxes based on data from a .js include, with data like this: $scope.fieldMappings.investmentObjectiveMap = [ {'id':"CAPITAL PRESERVATION", 'name':"Capital Preservation"}, {'id':"STABLE", 'name':"Moderate"}, {'id':"BALANCED", 'name':"Moderate Growth"}, // etc {'id':"NONE", 'name':"None"} ]; The checkboxes are created using an ng-repeat, like this: <div ng-repeat="investmentObjective in fieldMappings.investmentObjectiveMap"> ... </div> However, I needed the values represented by the checkboxes to map to a different model (not just 2-way-bound to the fieldmappings object). To accomplish this, I created a directive, which accepts a destination array destarray which is eventually mapped to the model. I also know I need to handle some very specific gui controls, such as unchecking "None" if anything else gets checked, or checking "None" if everything else gets unchecked. Also, "None" won't be an option in every group of checkboxes, so the directive needs to be generic enough to accept a validation function that can fiddle with the checked state of the checkbox group's inputs based on what's already clicked, but smart enough not to break if there is no option called "NONE". I started to do that by adding an ng-click which invoked a function in the controller, but in looking around Stack Overflow, I read people saying that its bad to put DOM manipulation code inside your controller - it should go in directives. So do I need another directive? So far: (html): <input my-checkbox-group type="checkbox" fieldobj="investmentObjective" ng-click="validationfunc()" validationfunc="clearOnNone()" destarray="investor.investmentObjective" /> Directive code: .directive("myCheckboxGroup", function () { return { restrict: "A", scope: { destarray: "=", // the source of all the checkbox values fieldobj: "=", // the array the values came from validationfunc: "&" // the function to be called for validation (optional) }, link: function (scope, elem, attrs) { if (scope.destarray.indexOf(scope.fieldobj.id) !== -1) { elem[0].checked = true; } elem.bind('click', function () { var index = scope.destarray.indexOf(scope.fieldobj.id); if (elem[0].checked) { if (index === -1) { scope.destarray.push(scope.fieldobj.id); } } else { if (index !== -1) { scope.destarray.splice(index, 1); } } }); } }; }) .js controller snippet: .controller( 'SuitabilityCtrl', ['$scope', function ( $scope ) { $scope.clearOnNone = function() { // naughty jQuery DOM manipulation code that // looks at checkboxes and checks/unchecks as needed }; The above code is done and works fine, except the naughty jquery code in clearOnNone(), which is why I wrote this question. And here is my question: after ALL this, I think to myself - I could be done already if I just manually handled all this GUI logic and validation junk with jQuery written in my controller. At what point does it become foolish to write these complicated directives that future developers will have to puzzle over more than if I had just written jQuery code that 99% of us would understand with a glance? How do other developers draw the line? I see this all over Stack Overflow. For example, this question seems like it could be answered with a dozen lines of straightforward jQuery, yet he has opted to do it the angular way, with a directive and a partial... it seems like a lot of work for a simple problem. Specifically, I suppose I would like to know: how SHOULD I be writing the code that checks whether "None" has been selected (if it exists as an option in this group of checkboxes), and then check/uncheck the other boxes accordingly? A more complex directive? I can't believe I'm the only developer that is having to implement code that is more complex than needed just to satisfy an opinionated framework.

  Read the article

• Smarty Tag help [closed]

  - by ntechi

  I am using an engine, where for forums Vbulletin is used and for Other thiiings social engine 3 is used, This was done by some professionals In one of the page I am having popular tags(In Social Engine) Its too long I want shortened it, How can I do it? here is my code {* SHOW POPULAR TAGS START *} <tr> <td align="left" valign="top"><img src="images/spacer.gif" alt="" width="1" height="10" /></td> </tr> <tr> <td align="left" valign="top"><table width="220" border="0" align="left" cellpadding="0" cellspacing="0"> <tr> <td width="12" align="left" valign="top"><img src="images/blog_belowtl.jpg" alt="" width="12" height="10" /></td> <td width="196" align="left" valign="top" background="images/blog_belowtbg.jpg"><img src="images/spacer.gif" width="1" height="10" /></td> <td width="12" align="right" valign="top"><img src="images/blog_belowtr.jpg" alt="" width="12" height="10" /></td> </tr> <tr> <td align="left" valign="top" background="images/blog_belowlbg.jpg" style="background-repeat: repeat-y;">&nbsp;</td> <td align="left" valign="top"><table width="196" border="0" align="left" cellpadding="0" cellspacing="0"> <tr> <td align="left" valign="top" > {*<div class="articletags" > {foreach from=$popular_tags item=poptag} <a class="tag{$poptag.class}" href="articles.php?tag={$poptag.name}">{$poptag.name}</a> {/foreach} </div>*} {foreach from=$popular_tags item=poptag} {if $poptag.count == '1' } {assign var=cssClass value='tahoma15_cloud'} {elseif $poptag.count == '2' } {assign var=cssClass value='tahoma12bold_cloud'} {elseif $poptag.count == '3'} {assign var=cssClass value='tahoma13bold_cloud'} {elseif $poptag.count == '4'} {assign var=cssClass value='tahoma14bold_cloud'} {elseif $poptag.count == '5'} {assign var=cssClass value='tahoma15_cloud'} {else} {assign var=cssClass value='tahoma18bold_cloud'} {/if} <span class="{$cssClass}"><a href="articles.php?tag={$poptag.name}" class="{$cssClass}">{$poptag.name}</a></span> {/foreach} </td> </tr> </table></td> <td align="left" valign="top" background="images/blog_belowrbg.jpg" style="background-repeat: repeat-y;">&nbsp;</td> </tr> <tr> <td align="left" valign="top"><img src="images/blog_belowbl.jpg" alt="" width="12" height="10" /></td> <td align="left" valign="top" background="images/blog_belowbbg.jpg"><img src="images/spacer.gif" alt="" width="1" height="10" /></td> <td align="right" valign="top"><img src="images/blog_belowbr.jpg" alt="" width="12" height="10" /></td> </tr> </table></td> </tr> {* SHOW POPULAR TAGS END *} You can check the lenght of this tag, on this link http://www.managementparadise.com/articles.php Currently it is displaying very long on the widget area I am new on this, so any help will be appreciated :)

  Read the article

• Violation of the DRY Principle

  - by Onorio Catenacci

  I am sure there's a name for this anti-pattern somewhere; however I am not familiar enough with the anti-pattern literature to know it. Consider the following scenario: or0 is a member function in a class. For better or worse, it's heavily dependent on class member variables. Programmer A comes along and needs functionality like or0 but rather than calling or0, Programmer A copies and renames the entire class. I'm guessing that she doesn't call or0 because, as I say, it's heavily dependent on member variables for its functionality. Or maybe she's a junior programmer and doesn't know how to call it from other code. So now we've got or0 and c0 (c for copy). I can't completely fault Programmer A for this approach--we all get under tight deadlines and we hack code to get work done. Several programmers maintain or0 so it's now version orN. c0 is now version cN. Unfortunately most of the programmers that maintained the class containing or0 seemed to be completely unaware of c0--which is one of the strongest arguments I can think of for the wisdom of the DRY principle. And there may also have been independent maintainance of the code in c. Either way it appears that or0 and c0 were maintained independent of each other. And, joy and happiness, an error is occurring in cN that does not occur in orN. So I have a few questions: 1.) Is there a name for this anti-pattern? I've seen this happen so often I'd find it hard to believe this is not a named anti-pattern. 2.) I can see a few alternatives: a.) Fix orN to take a parameter that specifies the values of all the member variables it needs. Then modify cN to call orN with all of the needed parameters passed in. b.) Try to manually port fixes from orN to cN. (Mind you I don't want to do this but it is a realistic possibility.) c.) Recopy orN to cN--again, yuck but I list it for sake of completeness. d.) Try to figure out where cN is broken and then repair it independently of orN. Alternative a seems like the best fix in the long term but I doubt the customer will let me implement it. Never time or money to fix things right but always time and money to repair the same problem 40 or 50 times, right? Can anyone suggest other approaches I may not have considered? If you were in my place, which approach would you take? If there are other questions and answers here along these lines, please post links to them. I don't mind removing this question if it's a dupe but my searching hasn't turned up anything that addresses this question yet. EDIT: Thanks everyone for all the thoughtful responses. I asked about a name for the anti-pattern so I could research it further on my own. I'm surprised this particular bad coding practice doesn't seem to have a "canonical" name for it.

  Read the article

• Property overwrite behaviour

  - by jeremyj

  I thought it worth sharing about property overwrite behaviour because i found it confusing at first in the hope of preventing some learning pain for the uninitiated with MSBuild :-)The confusion for me came because of the redundancy of using a Condition statement in a _project_ level property to test that a property has not been previously set. What i mean is that the following two statements are always identical in behaviour, regardless if the property has been supplied on the command line -  <PropertyGroup>    <PropA Condition=" '$(PropA)' == '' ">PropA set at project level</PropA>  </PropertyGroup>has the same behaviour regardless of command line override as -  <PropertyGroup>     <PropA>PropA set at project level</PropA>   </PropertyGroup>  i.e. the two above property declarations have the same result whether the property is overridden on the command line or not.To prove this experiment with the following .proj file -<?xml version="1.0" encoding="utf-8"?><Project ToolsVersion="4.0" >  <PropertyGroup>    <PropA Condition=" '$(PropA)' == '' ">PropA set at project level</PropA>  </PropertyGroup>  <Target Name="Target1">    <Message Text="PropA: $(PropA)"/>  </Target>  <Target Name="Target2">    <PropertyGroup>      <PropA>PropA set in Target2</PropA>    </PropertyGroup>    <Message Text="PropA: $(PropA)"/>  </Target>  <Target Name="Target3">    <PropertyGroup>      <PropA Condition=" '$(PropA)' == '' ">PropA set in Target3</PropA>    </PropertyGroup>    <Message Text="PropA: $(PropA)"/>  </Target>  <Target Name="Target4">    <PropertyGroup>      <PropA Condition=" '$(PropA)' != '' ">PropA set in Target4</PropA>    </PropertyGroup>    <Message Text="PropA: $(PropA)"/>  </Target></Project>Try invoking it using both of the following invocations and observe its output -1)>msbuild blog.proj /t:Target1;Target2;Target3;Target42)>msbuild blog.proj /t:Target1;Target2;Target3;Target4 "/p:PropA=PropA set on command line"Then try those two invocations with the following three variations of specifying PropA at the project level -1)  <PropertyGroup>     <PropA Condition=" '$(PropA)' == '' ">PropA set at project level</PropA>   </PropertyGroup> 2)   <PropertyGroup>     <PropA>PropA set at project level</PropA>   </PropertyGroup>3)  <PropertyGroup>     <PropA Condition=" '$(PropA)' != '' ">PropA set at project level</PropA>   </PropertyGroup>

  Read the article

• Silverlight Binding with multiple collections

  - by George Evjen

  We're designing some sport specific applications. In one of our views we have a gridview that is bound to an observable collection of Teams. This is pretty straight forward in terms of getting Teams bound to the GridView. <telerik:RadGridView Grid.Row="0" Grid.Column="0" x:Name="UsersGrid" ItemsSource="{Binding TeamResults}" SelectedItem="{Binding SelectedTeam, Mode=TwoWay}"> <telerik:RadGridView.Columns> <telerik:GridViewDataColumn Header="Name/Group" DataMemberBinding="{Binding TeamName}" MinWidth="150"></telerik:GridViewDataColumn> </telerik:RadGridView.Columns> </telerik:RadGridView> We use the observable collection of teams as our items source and then bind the property of TeamName to the first column. You can set the binding to mode=TwoWay, we use a dialog where we edit the selected item, so our binding here is not set to two way. The issue comes when we want to bind to a property that has another collection in it. To continue on our code from above, we have an observable collection of teams, within that collection we have a collection of KeyPeople. We get this collection using RIA Serivces with the code below. return _TeamsRepository.All().Include("KeyPerson"); Here we are getting all the teams and also including the KeyPerson entity. So when we are done with our Load we will end up with an observable collection of Teams with a navigation property / entity of KeyPerson. Within this KeyPerson entity is a list of people associated with that particular team. We want to display the head coach from this list of KeyPersons. This list currently has a list of ten or more people that are bound to this team, but we just want to display the Head Coach in the column next to team name. The issue becomes how do we bind to this included entity? I have found about three different ways to solve this issue. The way that seemed to fit us best is to utilize the features within RIA Services. We can create client side properties that will do the work for us. We will create in the client side library a partial class of Team. We will end up in our library a file that is Team.shared.cs. The code below is what we will put into our partial team class. public KeyPerson Coach        {            get            {                if (this.KeyPerson != null && this.KeyPerson.Any())                { return this.KeyPerson.Where(x => x.RelationshipType == “HeadCoach”).FirstOrDefault(); }                 return null;            }        } We will return just the person that is the Head Coach and then be able to bind that and any other additional properties that we need. <telerik:GridViewDataColumn Header="Coach" DataMemberBinding="{Binding Coach.Name}" MinWidth="150"></telerik:GridViewDataColumn> There are other ways that we could have solved this issue but we felt that creating a partial class through RIA Services best suited our needs.

  Read the article

• Criminals and Other Illegal Characters

  - by Most Valuable Yak (Rob Volk)

  SQLTeam's favorite Slovenian blogger Mladen (b | t) had an interesting question on Twitter: http://www.twitter.com/MladenPrajdic/status/347057950470307841 I liked Kendal Van Dyke's (b | t) reply: http://twitter.com/SQLDBA/status/347058908801667072 And he was right!  This is one of those pretty-useless-but-sounds-interesting propositions that I've based all my presentations on, and most of my blog posts. If you read all the replies you'll see a lot of good suggestions.  I particularly like Aaron Bertrand's (b | t) idea of going into the Unicode character set, since there are over 65,000 characters available.  But how to find an illegal character?  Detective work? I'm working on the premise that if SQL Server will reject it as a name it would throw an error.  So all we have to do is generate all Unicode characters, rename a database with that character, and catch any errors. It turns out that dynamic SQL can lend a hand here: IF DB_ID(N'a') IS NULL CREATE DATABASE [a]; DECLARE @c INT=1, @sql NVARCHAR(MAX)=N'', @err NVARCHAR(MAX)=N''; WHILE @c<65536 BEGIN BEGIN TRY SET @sql=N'alter database ' + QUOTENAME(CASE WHEN @c=1 THEN N'a' ELSE NCHAR(@c-1) END) + N' modify name=' + QUOTENAME(NCHAR(@c)); RAISERROR(N'*** Trying %d',10,1,@c) WITH NOWAIT; EXEC(@sql); SET @c+=1; END TRY BEGIN CATCH SET @err=ERROR_MESSAGE(); RAISERROR(N'Ooops - %d - %s',10,1,@c,@err) WITH NOWAIT; BREAK; END CATCH END SET @sql=N'alter database ' + QUOTENAME(NCHAR(@c-1)) + N' modify name=[a]'; EXEC(@sql); The script creates a dummy database "a" if it doesn't already exist, and only tests single characters as a database name.  If you have databases with single character names then you shouldn't run this on that server. It takes a few minutes to run, but if you do you'll see that no errors are thrown for any of the characters.  It seems that SQL Server will accept any character, no matter where they're from.  (Well, there's one, but I won't tell you which. Actually there's 2, but one of them requires some deep existential thinking.) The output is also interesting, as quite a few codes do some weird things there.  I'm pretty sure it's due to the font used in SSMS for the messages output window, not all characters are available.  If you run it using the SQLCMD utility, and use the -o switch to output to a file, and -u for Unicode output, you can open the file in Notepad or another text editor and see the whole thing. I'm not sure what character I'd recommend to answer Mladen's question.  I think the standard tab (ASCII 9) is fine.  There's also several specific separator characters in the original ASCII character set (decimal 28-31). But of all the choices available in Unicode whitespace, I think my favorite would be the Mongolian Vowel Separator.  Or maybe the zero-width space. (that'll be fun to print!)  And since this is Mladen we're talking about, here's a good selection of "intriguing" characters he could use.

  Read the article

• Using Private Extension Galleries in Visual Studio 2012

  - by Jakob Ehn

  Note: The installer and the complete source code is available over at CodePlex at the following location: http://inmetavsgallery.codeplex.com   Extensions and addins are everywhere in the Visual Studio ALM ecosystem! Microsoft releases new cool features in the form of extensions and the list of 3rd party extensions that plug into Visual Studio just keeps growing. One of the nice things about the VSIX extensions is how they are deployed. Microsoft hosts a public Visual Studio Gallery where you can upload extensions and make them available to the rest of the community. Visual Studio checks for updates to the installed extensions when you start Visual Studio, and installing/updating the extensions is fast since it is only a matter of extracting the files within the VSIX package to the local extension folder. But for custom, enterprise-specific extensions, you don’t want to publish them online to the whole world, but you still want an easy way to distribute them to your developers and partners. This is where Private Extension Galleries come into play. In Visual Studio 2012, it is now possible to add custom extensions galleries that can point to any URL, as long as that URL returns the expected content of course (see below).Registering a new gallery in Visual Studio is easy, but there is very little documentation on how to actually host the gallery. Visual Studio galleries uses Atom Feed XML as the protocol for delivering new and updated versions of the extensions. This MSDN page describes how to create a static XML file that returns the information about your extensions. This approach works, but require manual updates of that file every time you want to deploy an update of the extension. Wouldn’t it be nice with a web service that takes care of this for you, that just lets you drop a new version of your VSIX file and have it automatically detect the new version and produce the correct Atom Feed XML? Well search no more, this is exactly what the Inmeta Visual Studio Gallery Service does for you :-) Here you can see that in addition to the standard Online galleries there is an Inmeta Gallery that contains two extensions (our WIX templates and our custom TFS Checkin Policies). These can be installed/updated i the same way as extensions from the public Visual Studio Gallery. Installing the Service Download the installler (Inmeta.VSGalleryService.Install.msi) for the service and run it. The installation is straight forward, just select web site, application pool and (optional) a virtual directory where you want to install the service.   Note: If you want to run it in the web site root, just leave the application name blank Press Next and finish the installer. Open web.config in a text editor and locate the the <applicationSettings> element Edit the following setting values: FeedTitle This is the name that is shown if you browse to the service using a browser. Not used by Visual Studio BaseURI When Visual Studio downloads the extension, it will be given this URI + the name of the extension that you selected. This value should be on the following format: http://SERVER/[VDIR]/gallery/extension/ VSIXAbsolutePath This is the path where you will deploy your extensions. This can be a local folder or a remote share. You just need to make sure that the application pool identity account has read permissions in this folder Save web.config to finish the installation Open a browser and enter the URL to the service. It should show an empty Feed page:   Adding the Private Gallery in Visual Studio 2012 Now you need to add the gallery in Visual Studio. This is very easy and is done as follows: Go to Tools –> Options and select Environment –> Extensions and Updates Press Add to add a new gallery Enter a descriptive name, and add the URL that points to the web site/virtual directory where you installed the service in the previous step   Press OK to save the settings. Deploying an Extension This one is easy: Just drop the file in the designated folder! :-)  If it is a new version of an existing extension, the developers will be notified in the same way as for extensions from the public Visual Studio gallery: I hope that you will find this sever useful, please contact me if you have questions or suggestions for improvements!

  Read the article

• Why is the framerate (fps) capped at 60?

  - by dennmat

  ISSUE I recently moved a project from my laptop to my desktop(machine info below). On my laptop the exact same code displays the fps(and ms/f) correctly. On my desktop it does not. What I mean by this is on the laptop it will display 300 fps(for example) where on my desktop it will show only up to 60. If I add 100 objects to the game on the laptop I'll see my frame rate drop accordingly; the same test on the desktop results in no change and the frames stay at 60. It takes a lot(~300) entities before I'll see a frame drop on the desktop, then it will descend. It seems as though its "theoretical" frames would be 400 or 500 but will never actually get to that and only do 60 until there's too much to handle at 60. This 60 frame cap is coming from no where. I'm not doing any frame limiting myself. It seems like something external is limiting my loop iterations on the desktop, but for the last couple days I've been scratching my head trying to figure out how to debug this. SETUPS Desktop: Visual Studio Express 2012 Windows 7 Ultimate 64-bit Laptop: Visual Studio Express 2010 Windows 7 Ultimate 64-bit The libraries(allegro, box2d) are the same versions on both setups. CODE Main Loop: while(!abort) { frameTime = al_get_time(); if (frameTime - lastTime >= 1.0) { lastFps = fps/(frameTime - lastTime); lastTime = frameTime; avgMspf = cumMspf/fps; cumMspf = 0.0; fps = 0; } /** DRAWING/UPDATE CODE **/ fps++; cumMspf += al_get_time() - frameTime; } Note: There is no blocking code in the loop at any point. Where I'm at My understanding of al_get_time() is that it can return different resolutions depending on the system. However the resolution is never worse than seconds, and the double is represented as [seconds].[finer-resolution] and seeing as I'm only checking for a whole second al_get_time() shouldn't be responsible. My project settings and compiler options are the same. And I promise its the same code on both machines. My googling really didn't help me much, and although technically it's not that big of a deal. I'd really like to figure this out or perhaps have it explained, whichever comes first. Even just an idea of how to go about figuring out possible causes, because I'm out of ideas. Any help at all is greatly appreciated. EDIT: Thanks All. For any others that find this to disable vSync(windows only) in opengl: First get "wglext.h". It's all over the web. Then you can use a tool like GLee or just write your own quick extensions manager like: bool WGLExtensionSupported(const char *extension_name) { PFNWGLGETEXTENSIONSSTRINGEXTPROC _wglGetExtensionsStringEXT = NULL; _wglGetExtensionsStringEXT = (PFNWGLGETEXTENSIONSSTRINGEXTPROC) wglGetProcAddress("wglGetExtensionsStringEXT"); if (strstr(_wglGetExtensionsStringEXT(), extension_name) == NULL) { return false; } return true; } and then create and setup your function pointers: PFNWGLSWAPINTERVALEXTPROC wglSwapIntervalEXT = NULL; PFNWGLGETSWAPINTERVALEXTPROC wglGetSwapIntervalEXT = NULL; if (WGLExtensionSupported("WGL_EXT_swap_control")) { // Extension is supported, init pointers. wglSwapIntervalEXT = (PFNWGLSWAPINTERVALEXTPROC) wglGetProcAddress("wglSwapIntervalEXT"); // this is another function from WGL_EXT_swap_control extension wglGetSwapIntervalEXT = (PFNWGLGETSWAPINTERVALEXTPROC) wglGetProcAddress("wglGetSwapIntervalEXT"); } Then just call wglSwapIntervalEXT(0) to disable vSync and 1 to enable vSync. I found the reason this is windows only is that openGl actually doesn't deal with anything other than rendering it leaves the rest up to the OS and Hardware. Thanks everyone saved me a lot of time!

  Read the article

• php script google maps points from mysql (google example)

  - by user1637477

  I have recently added style information to my maps script, and it stopped working. Have I done something wrong? Guess you can tell I'm very new to this. Any help appreciated. <!DOCTYPE html> <html xmlns="http://www.w3.org/1999/xhtml"><head> <meta http-equiv="content-type" content="text/html; charset=utf-8"><title>Google Maps AJAX + mySQL/PHP Example</title> <script src="http://maps.google.com/maps/api/js?sensor=false" type="text/javascript"></script> <script type="text/javascript"> //<![CDATA[ ( *******************I INSERTED HERE ) var styles = [ { stylers: [ { hue: "#00ffe6" }, { saturation: -20 } ] },{ featureType: "road", elementType: "geometry", stylers: [ { lightness: 100 }, { visibility: "simplified" } ] },{ featureType: "road", elementType: "labels", stylers: [ { visibility: "off" } ] } ];**( ******************************** THROUGH TO HERE ) map.setOptions({styles: styles}); var customIcons = { restaurant: { icon: 'http://labs.google.com/ridefinder/images/mm_20_blue.png', shadow: 'http://labs.google.com/ridefinder/images/mm_20_shadow.png' }, bar: { icon: 'http://labs.google.com/ridefinder/images/mm_20_red.png', shadow: 'http://labs.google.com/ridefinder/images/mm_20_shadow.png' } }; function load() { var map = new google.maps.Map(document.getElementById("map"), { center: new google.maps.LatLng(-37.7735, 175.1418), zoom: 10, mapTypeId: 'roadmap' }); var infoWindow = new google.maps.InfoWindow; // Change this depending on the name of your PHP fileBHBHBHBHBHBHBHBBBBBBBBBBBBBBBBBBBBBBBBBBB downloadUrl("mywebsite-no i did this just a minute ago", function(data) { var xml = data.responseXML; var markers = xml.documentElement.getElementsByTagName("marker"); for (var i = 0; i < markers.length; i++) { var name = markers[i].getAttribute("name"); var address = markers[i].getAttribute("address"); var type = markers[i].getAttribute("type"); var point = new google.maps.LatLng( parseFloat(markers[i].getAttribute("lat")), parseFloat(markers[i].getAttribute("lng"))); var html = "<b>" + name + "</b> <br/>" + address; var icon = customIcons[type] || {}; var marker = new google.maps.Marker({ map: map, position: point, icon: icon.icon, shadow: icon.shadow }); bindInfoWindow(marker, map, infoWindow, html); } }); } function bindInfoWindow(marker, map, infoWindow, html) { google.maps.event.addListener(marker, 'click', function() { infoWindow.setContent(html); infoWindow.open(map, marker); }); } function downloadUrl(url, callback) { var request = window.ActiveXObject ? new ActiveXObject('Microsoft.XMLHTTP') : new XMLHttpRequest; request.onreadystatechange = function() { if (request.readyState == 4) { request.onreadystatechange = doNothing; callback(request, request.status); } }; request.open('GET', url, true); request.send(null); } function doNothing() {} //]]> </script><!--Adobe Edge Runtime--> <script type="text/javascript" charset="utf-8" src="map500x1000_edgePreload.js"></script> <style> .edgeLoad-EDGE-12956064 { visibility:hidden; } </style> <!--Adobe Edge Runtime End--> </head> <body onload="load()"> <div id="map" style="width: 1000px; height: 1000px;" class="edgeLoad-EDGE-12956064"></div> </body></html>

  Read the article

• how to access mysql table from wamp database using this php code? [migrated]

  - by user3909877

  how to access tables from database by using php in wamp server.i have done the following code but its not working for some reason.is there anything to put in 'action=""'.it is not giving any error but displaying the same page.i want to display table from database on any different entry in dropdown menu and pressing search button.. <p class="h2">Quick Search</p> <div class="sb2_opts"> <p> </p> <form method="post" action="" > <p>Enter your source and destination.</p> <p> From:</p> <select name="from"> <option value="Islamabad">Islamabad</option> <option value="Lahore">Lahore</option> <option value="murree">Murree</option> <option value="Muzaffarabad">Muzaffarabad</option> </select> <p> To:</p> <select name="To"> <option value="Islamabad">Islamabad</option> <option value="Lahore">Lahore</option> <option value="murree">Murree</option> <option value="Muzaffarabad">Muzaffarabad</option> </select> <input type="submit" value="search" /> </form> </form> </table> <?php if(isset($_POST['from']) and isset($_POST['To'])) { $from = $_POST['from'] ; $to = $_POST['To'] ; $table = array($from, $to); $con=mysqli_connect("localhost"); $mydb=mysql_select_db("homedb"); if (mysqli_connect_errno()) { echo "Failed to connect to MySQL: " . mysqli_connect_error(); } switch ($table) { case array ("Islamabad", "Lahore") : $result = mysqli_query($con,"SELECT * FROM flights"); echo "</flights>"; //table name is flights break; case array ("Islamabad", "Murree") : $result = mysqli_query($con,"SELECT * FROM `isb to murree`"); echo "</`isb to murree`>"; //table name isb to murree ; break; case array ("Islamabad", "Muzaffarabad") : $result = mysqli_query($con,"SELECT * FROM `isb to muzz`"); echo "</`isb to muzz`>"; break; //..... //...... default: echo "Your choice is nor valid !!"; } } mysqli_close($con); ?>

  Read the article

• Lots of first chance Microsoft.CSharp.RuntimeBinderExceptions thrown when dealing with dynamics

  - by Orion Edwards

  I've got a standard 'dynamic dictionary' type class in C# - class Bucket : DynamicObject { readonly Dictionary<string, object> m_dict = new Dictionary<string, object>(); public override bool TrySetMember(SetMemberBinder binder, object value) { m_dict[binder.Name] = value; return true; } public override bool TryGetMember(GetMemberBinder binder, out object result) { return m_dict.TryGetValue(binder.Name, out result); } } Now I call it, as follows: static void Main(string[] args) { dynamic d = new Bucket(); d.Name = "Orion"; // 2 RuntimeBinderExceptions Console.WriteLine(d.Name); // 2 RuntimeBinderExceptions } The app does what you'd expect it to, but the debug output looks like this: A first chance exception of type 'Microsoft.CSharp.RuntimeBinder.RuntimeBinderException' occurred in Microsoft.CSharp.dll A first chance exception of type 'Microsoft.CSharp.RuntimeBinder.RuntimeBinderException' occurred in Microsoft.CSharp.dll 'ScratchConsoleApplication.vshost.exe' (Managed (v4.0.30319)): Loaded 'Anonymously Hosted DynamicMethods Assembly' A first chance exception of type 'Microsoft.CSharp.RuntimeBinder.RuntimeBinderException' occurred in Microsoft.CSharp.dll A first chance exception of type 'Microsoft.CSharp.RuntimeBinder.RuntimeBinderException' occurred in Microsoft.CSharp.dll Any attempt to access a dynamic member seems to output a RuntimeBinderException to the debug logs. While I'm aware that first-chance exceptions are not a problem in and of themselves, this does cause some problems for me: I often have the debugger set to "break on exceptions", as I'm writing WPF apps, and otherwise all exceptions end up getting converted to a DispatcherUnhandledException, and all the actual information you want is lost. WPF sucks like that. As soon as I hit any code that's using dynamic, the debug output log becomes fairly useless. All the useful trace lines that I care about get hidden amongst all the useless RuntimeBinderExceptions Is there any way I can turn this off, or is the RuntimeBinder unfortunately just built like that? Thanks, Orion

  Read the article

• Server cannot set status after HTTP headers have been sent IIS7.5

  - by marcinn

  Hi, Sometimes I get exception in my production environment: Process information Process ID: 3832 Process name: w3wp.exe Account name: NT AUTHORITY\NETWORK SERVICE Exception information Exception type: System.Web.HttpException Exception message: Server cannot set status after HTTP headers have been sent. Request information Request URL: http://www.myulr.pl/logon Request path: /logon User host address: 10.11.9.1 User: user001 Is authenticated: True Authentication Type: Forms Thread account name: NT AUTHORITY\NETWORK SERVICE Thread information Thread ID: 10 Thread account name: NT AUTHORITY\NETWORK SERVICE Is impersonating: False Stack trace: at System.Web.HttpResponse.set_StatusCode(Int32 value) at System.Web.HttpResponseWrapper.set_StatusCode(Int32 value) at System.Web.Mvc.HandleErrorAttribute.OnException(ExceptionContext filterContext) at System.Web.Mvc.ControllerActionInvoker.InvokeExceptionFilters(ControllerContext controllerContext, IList(1) filters, Exception exception) at System.Web.Mvc.ControllerActionInvoker.InvokeAction(ControllerContext controllerContext, String actionName) at System.Web.Mvc.Controller.ExecuteCore() at System.Web.Mvc.MvcHandler.<>c__DisplayClass8.<BeginProcessRequest>b__4() at System.Web.Mvc.Async.AsyncResultWrapper.<>c__DisplayClass1.<MakeVoidDelegate>b__0() at System.Web.Mvc.Async.AsyncResultWrapper.<>c__DisplayClass8(1).<BeginSynchronous>b__7(IAsyncResult _) at System.Web.Mvc.Async.AsyncResultWrapper.WrappedAsyncResult(1).End() at System.Web.Mvc.MvcHandler.EndProcessRequest(IAsyncResult asyncResult) at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& ompletedSynchronously) I didn't noticed this error on my test environment what should I check? I am using ASP.NET MVC 2 (Release Candidate 2)

  Read the article

• Why are some of my view not aligned correctly at the bottom of my relative layout?

  - by Janusz

  I have problems getting some of my views aligned in a relative layout that I use inside a row of my listview. Here is a screenshot from the layout builder in Eclipse, this is what I think it should look like: The next image is from the emulator. Now the TestTestTest View is at the top and covers the name and distance Textviews. This is my layout: <?xml version="1.0" encoding="utf-8"?> <RelativeLayout xmlns:android="http://schemas.android.com/apk/res/android" android:layout_width="fill_parent" android:layout_height="fill_parent" android:padding="4dip"> <ImageView android:id="@+id/logo" android:layout_width="wrap_content" android:layout_height="wrap_content" android:adjustViewBounds="true" android:scaleType="centerInside" android:src="@drawable/icon" android:layout_centerVertical="true" android:layout_alignParentLeft="true" android:background="@color/green" /> <TextView android:id="@+id/distance" android:layout_width="wrap_content" android:layout_height="wrap_content" android:text="Distance" android:layout_alignParentRight="true" android:layout_alignParentTop="true" android:paddingRight="4dip" android:background="#000000" /> <TextView android:id="@+id/name" android:layout_width="fill_parent" style="@style/ListHeadText" android:layout_height="wrap_content" android:text="Name" android:layout_alignTop="@id/distance" android:layout_toRightOf="@id/logo" android:layout_toLeftOf="@id/distance" android:gravity="clip_horizontal" android:lines="1" android:paddingLeft="4dip" android:background="@color/red" /> <TextView android:id="@+id/number" android:layout_width="wrap_content" android:layout_height="wrap_content" android:text="Number" android:paddingRight="4dip" android:layout_alignRight="@id/distance" android:background="@color/darkred" android:layout_below="@id/distance" /> <TextView android:id="@+id/subcategory" android:layout_width="wrap_content" android:layout_height="wrap_content" android:text="Subcategory" android:paddingLeft="4dip" android:layout_alignLeft="@id/name" android:lines="1" android:gravity="clip_horizontal" android:layout_below="@id/distance" android:background="@color/green" /> <TextView android:id="@+id/test" android:layout_width="fill_parent" android:layout_height="wrap_content" android:text="TestTestTest" android:paddingLeft="4dip" android:layout_alignParentBottom="true" android:gravity="bottom" android:background="@color/red" /> Shouldnt align_parent_bottom put the view at the bottom of the cell in the list?

  Read the article

< Previous Page | 458 459 460 461 462 463 464 465 466 467 468 469  | Next Page >