Search Results

Search found 13000 results on 520 pages for 'member functions'.

Page 463/520 | < Previous Page | 459 460 461 462 463 464 465 466 467 468 469 470  | Next Page >

  • Why can't I use SSL certs imported via Server Admin in a custom Apache install?

    - by morgant
    I've got a couple of Mac OS X 10.6.8 Server web servers that run a custom AMP255 (Apache 2.x, MySQL 5.x, and PHP 5.x) stack installed using MacPorts. We've got a lot of Mac OS X Server servers and generally install SSL certs via Server Admin and they "just work" in the built-in services, however, these web servers have always had SSL certs installed in a non-standard location and used only for Apache. Long story short, we're trying to standardize this part of our administration and install certs via Server Admin, but have run into the following issue: when the certs are installed via Server Admin and referenced in our Apache conf files, Apache then prompts for a password upon trying to start. It does not seem to be any password we know, certainly not the admin or keychain passwords! We've added the _www user to the certusers (mainly just to ensure they have the proper access to the private key in /etc/certificates/). So, with the custom installed certs we have the following files (basically just pasted in from the company we purchase our certs from): -rw-r--r-- 1 root admin 1395 Apr 10 11:22 *.domain.tld.ca -rw-r--r-- 1 root admin 1656 Apr 10 11:21 *.domain.tld.cert -rw-r--r-- 1 root admin 1680 Apr 10 11:22 *.domain.tld.key And the following in the VirtualHost in /opt/local/apache2/conf/extra/httpd-ssl.conf: SSLCertificateFile /path/to/certs/*.domain.tld.cert SSLCertificateKeyFile /path/to/certs/*.domain.tld.key SSLCACertificateFile /path/to/certs/*.domain.tld.ca This setup functions normally. If we use the certs installed via Server Admin, which both Server Admin & Keychain Assistant show as valid, they're installed in /etc/certificates/ as follows: -rw-r--r-- 1 root wheel 1655 Apr 9 13:44 *.domain.tld.SOMELONGHASH.cert.pem -rw-r--r-- 1 root wheel 4266 Apr 9 13:44 *.domain.tld.SOMELONGHASH.chain.pem -rw-r----- 1 root certusers 3406 Apr 9 13:44 *.domain.tld.SOMELONGHASH.concat.pem -rw-r----- 1 root certusers 1751 Apr 9 13:44 *.domain.tld.SOMELONGHASH.key.pem And if we replace the aforementioned lines in our httpd-ssl.conf with the following: SSLCertificateFile /etc/certificates/*.domain.tld.SOMELONGHASH.cert.pem SSLCertificateKeyFile /etc/certificates/*.domain.tld.SOMELONGHASH.key.pem SSLCertificateChainFile /etc/certificates/*.domain.tld.SOMELONGHASH.chain.pem This prompts for the unknown password. I have also tried httpd-ssl.conf configured as follows: SSLCertificateFile /etc/certificates/*.domain.tld.SOMELONGHASH.cert.pem SSLCertificateKeyFile /etc/certificates/*.domain.tld.SOMELONGHASH.key.pem SSLCertificateChainFile /etc/certificates/*.domain.tld.SOMELONGHASH.concat.pem And as: SSLCertificateFile /etc/certificates/*.domain.tld.SOMELONGHASH.cert.pem SSLCertificateKeyFile /etc/certificates/*.domain.tld.SOMELONGHASH.key.pem SSLCACertificateFile /etc/certificates/*.domain.tld.SOMELONGHASH.chain.pem We've verified that the certificate is configured to allow all applications access it (in Keychain Assistant). A diff of the /etc/certificates/*.domain.tld.SOMELONGHASH.key.pem & *.domain.tld.key files shows the former is encrypted and the latter is not, so we're assuming that Server Admin/Keychain Assistant is encrypting them for some reason. I know I can create an unencrypted key file as follows: sudo openssl rsa -in /etc/certificates/*.domain.tld.SOMELONGHASH.key.pem -out /etc/certificates/*.domain.tld.SOMELONGHASH.key.no_password.pem But, I can't do that without entering the password. I thought maybe I could export an unencrypted copy of the key from Keychain Admin, but I'm not seeing such an option (not to mention that the .pem options are greyed out in all export options). Any assistance would be greatly appreciated.

    Read the article

  • Optimal setup for ASUS P6X58D Premium BIOS (no OC)?

    - by rumtscho
    Normally, I'd trust the mainboard manufacturer to choose the best options as defaults. But I had trouble with the board, because even with Quick Boot enabled, it booted twice as slowly as a Pentium 4 Celeron. Then I changed lots of options at once (most of them weren't explained in the manual, just mentioned with a single sentence) and the boot time is only marginally worse than the Pentium 4 (54 sec against 46 sec from button to pw entering screen). Now I don't know if I have turned something off which should have stayed on. I guess I even won't be able to boot from a CD now, because even though it is present in the boot sequence, I took off a timeout I think it needs to check whether there is a disk in the drive. The second reason is that I don't have an internal HDD, only a SSD. I forgot my sources blush but I am under the impression that today's BIOS and OS options are geared toward booting from a HDD, which is often less than optimal when one boots from a SSD, especially when there are functions which cause avoidable writing cycles, as a SSD wears out after too many writing cycles. Most of the things I've read concern the OS, but there are some BIOS-relevant options too. I am especially confused about the disk mode. The board supports AHCI, IDE-simulation and RAID, but of the different articles I've read, there is a proponent for each and no clear arguments for any. So can one tell me which options are important in general and which are important for a SSD-only system? I don't want to overclock the CPU, so you don't have to say anything about this (yes I know the board is meant for OC:)). I am thinking of overclocking the RAM, since they sold me 1600er heatsinked modules which are running at 1066 now, but I'm not sure yet about that. The rest of the system: i7-930, Intel X25-m G2, 6 GB RAM, GTS 250, some no-name Blue-ray ROM. 2 external HDDs over USB 2.0. Lots of other USB-connected hardware (12 devices I think), no SATA 3 drives (will disabling the controller have an impact on performance?), no LAN, only WiFi. Lucid Lynx 64 bit, no dual boot, no virtual installations. The main uses of the system are: managing and playing/showing all the media stored on the external disks, lots of image manipulation, some video editing, a bit of (non-demanding) gaming, rarely development. Lots of Internet surfing too, but this shouldn't have much impact on performance.

    Read the article

  • Failed Administrator login on WSO2 IS with external OpenLDAP

    - by Marco Rivadeneyra
    I have an installation of WSO2 Identity Server and I'm trying to make it work with an external OpenLDAP instance I have followed this guide: http://wso2.org/project/solutions/identity/3.2.3/docs/user-core/admin_guide.html#LDAP For the read-only mode. But when I try to log-in I get a failed login and the following error on the console: TID: [0] [WSO2 Identity Server] [2012-08-10 17:10:25,493] WARN {org.wso2.carbon.core.services.util.CarbonAuthenticationUtil} - Failed Administrator login attempt 'john[0]' at [2012-08-10 17:10:25,0493] from IP address 127.0.0.1 {org.wso2.carbon.core.services.util.CarbonAuthenticationUtil} Full log: http://pastebin.com/pHUGXBqv My configuration file looks as follows: <UserManager> <Realm> <Configuration> <AdminRole>admin</AdminRole> <AdminUser> <UserName>john</UserName> <Password>johnldap</Password> </AdminUser> <EveryOneRoleName>everyone</EveryOneRoleName> <!-- By default users in this role sees the registry root --> <ReadOnly>true</ReadOnly> <MaxUserNameListLength>500</MaxUserNameListLength> <Property name="url">jdbc:h2:repository/database/WSO2CARBON_DB</Property> <Property name="userName">wso2carbon</Property> <Property name="password">wso2carbon</Property> <Property name="driverName">org.h2.Driver</Property> <Property name="maxActive">50</Property> <Property name="maxWait">60000</Property> <Property name="minIdle">5</Property> </Configuration> <UserStoreManager class="org.wso2.carbon.user.core.ldap.LDAPUserStoreManager"> <Property name="ReadOnly">true</Property> <Property name="MaxUserNameListLength">100</Property> <Property name="ConnectionURL">ldap://192.168.81.144:389</Property> <Property name="ConnectionName">cn=admin,dc=example,dc=com</Property> <Property name="ConnectionPassword">admin</Property> <Property name="UserSearchBase">ou=People,dc=example,dc=com</Property> <Property name="UserNameListFilter">(objectClass=inetOrgPerson)</Property> <Property name="UserNameAttribute">uid</Property> <Property name="ReadLDAPGroups">false</Property> <Property name="GroupSearchBase">ou=Groups,dc=example,dc=com</Property> <Property name="GroupSearchFilter">(objectClass=groupOfNames)</Property> <Property name="GroupNameAttribute">uid</Property> <Property name="MembershipAttribute">member</Property> </UserStoreManager> <AuthorizationManager class="org.wso2.carbon.user.core.authorization.JDBCAuthorizationManager"></AuthorizationManager> </Realm> I followed this guide to configure my LDAP server up to Loggging: https://help.ubuntu.com/12.04/serverguide/openldap-server.html Could you suggest what might be wrong? The LDAP log is available at: http://pastebin.com/T9rFYEAW

    Read the article

  • Neighbour table overflow on Linux hosts related to bridging and ipv6

    - by tim
    Note: I already have a workaround for this problem (as described below) so this is only a "want-to-know" question. I have a productive setup with around 50 hosts including blades running xen 4 and equallogics providing iscsi. All xen dom0s are almost plain Debian 5. The setup includes several bridges on every dom0 to support xen bridged networking. In total there are between 5 and 12 bridges on each dom0 servicing one vlan each. None of the hosts has routing enabled. At one point in time we moved one of the machines to a new hardware including a raid controller and so we installed an upstream 3.0.22/x86_64 kernel with xen patches. All other machines run debian xen-dom0-kernel. Since then we noticed on all hosts in the setup the following errors every ~2 minutes: [55888.881994] __ratelimit: 908 callbacks suppressed [55888.882221] Neighbour table overflow. [55888.882476] Neighbour table overflow. [55888.882732] Neighbour table overflow. [55888.883050] Neighbour table overflow. [55888.883307] Neighbour table overflow. [55888.883562] Neighbour table overflow. [55888.883859] Neighbour table overflow. [55888.884118] Neighbour table overflow. [55888.884373] Neighbour table overflow. [55888.884666] Neighbour table overflow. The arp table (arp -n) never showed more than around 20 entries on every machine. We tried the obvious tweaks and raised the /proc/sys/net/ipv4/neigh/default/gc_thresh* values. FInally to 16384 entries but no effect. Not even the interval of ~2 minutes changed which lead me to the conclusion that this is totally unrelated. tcpdump showed no uncommon ipv4 traffic on any interface. The only interesting finding from tcpdump were ipv6 packets bursting in like: 14:33:13.137668 IP6 fe80::216:3eff:fe1d:9d01 > ff02::1:ff1d:9d01: HBH ICMP6, multicast listener reportmax resp delay: 0 addr: ff02::1:ff1d:9d01, length 24 14:33:13.138061 IP6 fe80::216:3eff:fe1d:a8c1 > ff02::1:ff1d:a8c1: HBH ICMP6, multicast listener reportmax resp delay: 0 addr: ff02::1:ff1d:a8c1, length 24 14:33:13.138619 IP6 fe80::216:3eff:fe1d:bf81 > ff02::1:ff1d:bf81: HBH ICMP6, multicast listener reportmax resp delay: 0 addr: ff02::1:ff1d:bf81, length 24 14:33:13.138974 IP6 fe80::216:3eff:fe1d:eb41 > ff02::1:ff1d:eb41: HBH ICMP6, multicast listener reportmax resp delay: 0 addr: ff02::1:ff1d:eb41, length 24 which placed the idea in my mind that the problem maybe related to ipv6, since we have no ipv6 services in this setup. The only other hint was the coincidence of the host upgrade with the beginning of the problems. I powered down the host in question and the errors were gone. Then I subsequently took down the bridges on the host and when i took down (ifconfig down) one particularly bridge: br-vlan2159 Link encap:Ethernet HWaddr 00:26:b9:fb:16:2c inet6 addr: fe80::226:b9ff:fefb:162c/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:120 errors:0 dropped:0 overruns:0 frame:0 TX packets:9 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:5286 (5.1 KiB) TX bytes:726 (726.0 B) eth0.2159 Link encap:Ethernet HWaddr 00:26:b9:fb:16:2c inet6 addr: fe80::226:b9ff:fefb:162c/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1801 errors:0 dropped:0 overruns:0 frame:0 TX packets:20 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:126228 (123.2 KiB) TX bytes:1464 (1.4 KiB) bridge name bridge id STP enabled interfaces ... br-vlan2158 8000.0026b9fb162c no eth0.2158 br-vlan2159 8000.0026b9fb162c no eth0.2159 The errors went away again. As you can see the bridge holds no ipv4 address and it's only member is eth0.2159 so no traffic should cross it. Bridge and interface .2159 / .2157 / .2158 which are in all aspects identical apart from the vlan they are connected to had no effect when taken down. Now I disabled ipv6 on the entire host via sysctl net.ipv6.conf.all.disable_ipv6 and rebooted. After this even with bridge br-vlan2159 enabled no errors occur. Any ideas are welcome.

    Read the article

  • Troubleshooting sudoers via ldap

    - by dafydd
    The good news is that I got sudoers via ldap working on Red Hat Directory Server. The package is sudo-1.7.2p1. I have some LDAP/Kerberos users in an LDAP group called wheel, and I have this entry in LDAP: # %wheel, SUDOers, example.com dn: cn=%wheel,ou=SUDOers,dc=example,dc=com cn: %wheel description: Members of group wheel have access to all privileges. objectClass: sudoRole objectClass: top sudoCommand: ALL sudoHost: ALL sudoUser: %wheel So, members of group wheel have administrative privileges via sudo. This has been tested and works fine. Now, I have this other sudo privilege set up to allow members of a group called Administrators to perform two commands as the non-root owner of those commands. # %Administrators, SUDOers, example.com dn: cn=%Administrators,ou=SUDOers,dc=example,dc=com sudoRunAsGroup: appGroup sudoRunAsUser: appOwner cn: %Administrators description: Allow members of the group Administrators to run various commands . objectClass: sudoRole objectClass: top sudoCommand: appStop sudoCommand: appStart sudoCommand: /path/to/appStop sudoCommand: /path/to/appStart sudoUser: %Administrators Unfortunately, members of Administrators are still refused permission to run appStart or appStop: -bash-3.2$ sudo /path/to/appStop [sudo] password for Aaron: Sorry, user Aaron is not allowed to execute '/path/to/appStop' as root on host.example.com. -bash-3.2$ sudo -u appOwner /path/to/appStop [sudo] password for Aaron: Sorry, user Aaron is not allowed to execute '/path/to/appStop' as appOwner on host.example.com. /var/log/secure shows me these two sets of messages for the two attempts: Oct 31 15:02:36 host sudo: pam_unix(sudo:auth): authentication failure; logname=Aaron uid=0 euid=0 tty=/dev/pts/3 ruser= rhost= user=Aaron Oct 31 15:02:37 host sudo: pam_krb5[1508]: TGT verified using key for 'host/[email protected]' Oct 31 15:02:37 host sudo: pam_krb5[1508]: authentication succeeds for 'Aaron' ([email protected]) Oct 31 15:02:37 host sudo: Aaron : command not allowed ; TTY=pts/3 ; PWD=/auto/home/Aaron ; USER=root ; COMMAND=/path/to/appStop Oct 31 15:02:52 host sudo: pam_unix(sudo:auth): authentication failure; logname=Aaron uid=0 euid=0 tty=/dev/pts/3 ruser= rhost= user=Aaron Oct 31 15:02:52 host sudo: pam_krb5[1547]: TGT verified using key for 'host/[email protected]' Oct 31 15:02:52 host sudo: pam_krb5[1547]: authentication succeeds for 'Aaron' ([email protected]) Oct 31 15:02:52 host sudo: Aaron : command not allowed ; TTY=pts/3 ; PWD=/auto/home/Aaron ; USER=appOwner; COMMAND=/path/to/appStop The questions: Does sudo have some sort of verbose or debug mode where I can actually watch it capture the sudoers privilege list and determine whether or not Aaron should have the privilege to run this command? (This question is probably independent of where the sudoers database is kept.) Does sudo work with some background mechanism that might have a log level I could turn up? Right now, I can't fix a problem I can't identify. Is this an LDAP search failure? Is this a group member matching failure? Identifying why the command fails will help me identify the fix... Next step: Recreate the privilege in /etc/sudoers, and see if it works locally... Cheers!

    Read the article

  • Splunk is fantastically expensive: What are the alternatives? [closed]

    - by samsmith
    Possible Duplicate: Alternatives to Splunk? This has been discussed, but it has been several months, so it may be time to revisit it: Earlier discussion RE Splunk alternatives For the record, Splunk rocks. But the pricing is simply beyond what we can consider (When I spoke with Splunk today, the cost for a system to index 5gb/day of data is over $30,000.) That is more than we spend on SQL Server (by a large multiple), more than we spend on a rack of servers (by a multiple), etc. etc. The splunk sales team is correct (that for $30K we get more value and functionality than if we spend the same building our own system), but it doesn't matter. The splunk cost is simply too high (by a multiple). Soooooo, we are looking around! Is anyone out there building a splunk like system? Our basic need: Able to listen for syslog messages on multiple udp ports Able to index the incoming data in an async way Some kind of search engine Some kind of UI An API to the search engine (to embed in our console) We currently need to index 3-5gb/day, but need to be able to scale to 10gb/day or more. We do not need a lot of history (30 days is fine). We use Windows 2008 and 2003 servers. Thanks for your thoughts! UPDATE: We spent two weeks researching commercial and open source options. Our conclusion: Write our own (we are a software company... we know how to write things). We built a great system built on mongodb and .NET that gives us the functions we needed from MongoDB in about one engineering week. We have now completed our implementation. We use two Mongodb servers (master and slave), and are able to log and index any amount of log data (5gb/day, 15gb/day, etc), limited only by disk space. OBSERVATIONS: This space needs a solid solution that is $1000-3000 flat rate. The licensing models used by the commercial firms are based on a "milk the data center ops guys" models. That is their right (of course!), but it leaves a HUGE space open for someone to come in underneath them. My guess is that in another year or two there will be a good open source solution that will be really usable. Thank you all for your input (even if it was self promotion).

    Read the article

  • Could I centralize batch files more efficiently?

    - by PeanutsMonkey
    I am new to the world of batch scripting so please forgive what may appear as basic questions. I am learning as I get assigned different jobs and I am a huge proponent of automation where possible. I have several batch files that perform several tasks. Each of these files had their paths hard-coded e.g. c:\temp. d:\data, etc in the batch file. Initially I moved these to a text file I could call from a batch file e.g. for /f "tokens=1,2 delims==" %%R in (config.txt) do ( if %%R==bdata set bdata=%%S if %%R==cdata set cdata=%%S ) The config.txt file contains these values bdata=c:\temp cdata=d:\data I realized that each time I would need to create a new variable, I would need to update the config.txt file as well the config.bat files. I decided I would move all the values to just the config.bat file as follows set bdata=c:\temp set cdata=d:\data I then updated each of the existing batch files to call the variables rather than the hard-coded paths. I also added the following lines of code to each batch file except config.bat. The only additional line added to the config.bat file is @echo off. @echo off setlocal enableextensions enabledelayedexpansion call config.bat I then have another batch file that centralizes calling all the batch files in sequence. The name of this batch file is start.bat. The reason I am using start /wait is because there have been instances of where the delete.bat runs before compress.bat has had an opportunity to finish. start /wait compress.bat start /wait validate.bat start /wait delete.bat Questions Is this the best way to centralize values and if not, what is a better way? Do I need to specify setlocal enableextensions enabledelayedexpansion in all the existing batch files? Do all the batch files have to have @echo off or is it sufficient for just the config.bat file? Is start /wait the best way to call multiple files? Can I pass values from one batch file to another using the said command? All the batch files have different functions e.g. move, delete, etc however use %%a or %%b. Is this okay? For example The validate.bat file has the code for %%a in (%bdata%\*.*) do if "%%~xa" == "" move /Y "%bdata%\%%~xa" "%bdata%\%done%" and the delete.bat file has the code for %%a in (%bdata%\*.*) do if "%%~xa" == ".txt" del "%%a"

    Read the article

  • Explanation of the init.d/scripts Fedora

    - by Shahmir Javaid
    Below is a copy of vsftpd, i need some explanations of some of the scripts mentioned below in this script: #!/bin/bash # ### BEGIN INIT INFO # Provides: vsftpd # Required-Start: $local_fs $network $named $remote_fs $syslog # Required-Stop: $local_fs $network $named $remote_fs $syslog # Short-Description: Very Secure Ftp Daemon # Description: vsftpd is a Very Secure FTP daemon. It was written completely from # scratch ### END INIT INFO # vsftpd This shell script takes care of starting and stopping # standalone vsftpd. # # chkconfig: - 60 50 # description: Vsftpd is a ftp daemon, which is the program \ # that answers incoming ftp service requests. # processname: vsftpd # config: /etc/vsftpd/vsftpd.conf # Source function library. . /etc/rc.d/init.d/functions # Source networking configuration. . /etc/sysconfig/network RETVAL=0 prog="vsftpd" start() { # Start daemons. # Check that networking is up. [ ${NETWORKING} = "no" ] && exit 1 [ -x /usr/sbin/vsftpd ] || exit 1 if [ -d /etc/vsftpd ] ; then CONFS=`ls /etc/vsftpd/*.conf 2>/dev/null` [ -z "$CONFS" ] && exit 6 for i in $CONFS; do site=`basename $i .conf` echo -n $"Starting $prog for $site: " daemon /usr/sbin/vsftpd $i RETVAL=$? echo if [ $RETVAL -eq 0 ]; then touch /var/lock/subsys/$prog break else if [ -f /var/lock/subsys/$prog ]; then RETVAL=0 break fi fi done else RETVAL=1 fi return $RETVAL } stop() { # Stop daemons. echo -n $"Shutting down $prog: " killproc $prog RETVAL=$? echo [ $RETVAL -eq 0 ] && rm -f /var/lock/subsys/$prog return $RETVAL } # See how we were called. case "$1" in start) start ;; stop) stop ;; restart|reload) stop start RETVAL=$? ;; condrestart|try-restart|force-reload) if [ -f /var/lock/subsys/$prog ]; then stop start RETVAL=$? fi ;; status) status $prog RETVAL=$? ;; *) echo $"Usage: $0 {start|stop|restart|try-restart|force-reload|status}" exit 1 esac exit $RETVAL Question I What the hell is the difference between the && and || signs in the below commands, and is it just an easy way to do a simple if check or is it completely different to a if[..something..]; then ..something.. fi: # Check that networking is up. [ ${NETWORKING} = "no" ] && exit 1 [ -x /usr/sbin/vsftpd ] || exit 1 Question II i get what -eq and -gt is (equal to, greater than) but is there a simple website that explains what -x, -d and -f are? Any help would be apreciated Running Fedora 12 on my OS. Script copied from /etc/init.d/vsftpd Question III It says required starts are $local_fs $network $named $remote_fs $syslog but i cant see any where it checks for those.

    Read the article

  • eAccelerator settings for PHP/Centos/Apache

    - by bobbyh
    I have eAccelerator installed on a server running Wordpress using PHP/Apache on CentOS. I am occassionally getting persistent "white pages", which presumably are PHP Fatal Errors (although these errors don't appear in my error_log). These "white pages" are sprinkled here and there throughout the site. They persist until I go to my eAccelerator control.php page and clear/clean/purge my caches, which suggests to me that I've configured eAccelerator improperly. Here are my current /etc/php.ini settings: memory_limit = 128M; eaccelerator.shm_size="64", where shm.size is "the amount of shared memory eAccelerator should allocate to cache PHP scripts" (see http://eaccelerator.net/wiki/Settings) eaccelerator.shm_max="0", where shm_max is "the maximum size a user can put in shared memory with functions like eaccelerator_put ... The default value is "0" which disables the limit" eaccelerator.shm_ttl="0" - "When eAccelerator doesn't have enough free shared memory to cache a new script it will remove all scripts from shared memory cache that haven't been accessed in at least shm_ttl seconds. By default this value is set to "0" which means that eAccelerator won't try to remove any old scripts from shared memory." eaccelerator.shm_prune_period="0" - "When eAccelerator doesn't have enough free shared memory to cache a script it tries to remove old scripts if the previous try was made more then "shm_prune_period" seconds ago. Default value is "0" which means that eAccelerator won't try to remove any old script from shared memory." eaccelerator.keys = "shm_only" - "These settings control the places eAccelerator may cache user content. ... 'shm_only' cache[s] data in shared memory" On my phpinfo page, it says: memory_limit 128M Version 0.9.5.3 and Caching Enabled true On my eAccelerator control.php page, it says 64 MB of total RAM available Memory usage 77.70% (49.73MB/ 64.00MB) 27.6 MB is used by cached scripts in the PHP opcode cache (I added up the file sizes myself) 22.1 MB is used by the cache keys, which is populated by the Wordpress object cache. My questions are: Is it true that there is only 36.4 MB of room in the eAccelerator cache for total "cache keys" (64 MB of total RAM minus whatever is taken by cached scripts, which is 27.6 MB at the moment)? What happens if my app tries to write more than 22.1 MB of cache keys to the eAccelerator memory cache? Does this cause eAccelerator to go crazy, like I've seen? If I change eaccelerator.shm_max to be equal to (say) 32 MB, would that avoid this problem? Do I also need to change shm_ttl and shm_prune_period to make eAccelerator respect the MB limit set by shm_max? Thanks! :-)

    Read the article

  • Nagios shell script cannot be executed

    - by MeinAccount
    I'm trying to monitor GitLab with nagios. I've created the following command definition and shell script but when checking the service I'm receiving the following e-mail. How can I solve this? The file is executable. [...] nagios : 3 incorrect password attempts ; TTY=unknown ; PWD=/ ; USER=git ; COMMAND=/bin/bash -c /var/lib/nagios/custom_plugins/check_gitlab.sh Command definition: define command { command_name custom_check_gitlab command_line /var/lib/nagios/custom_plugins/check_gitlab.sh } Shell script: #! /bin/sh # [...] RAILS_ENV="production" # Script variable names should be lower-case not to conflict with internal /bin/sh variables such as PATH, EDITOR or SHELL. app_root="/home/git/gitlab" app_user="git" unicorn_conf="$app_root/config/unicorn.rb" pid_path="$app_root/tmp/pids" socket_path="$app_root/tmp/sockets" web_server_pid_path="$pid_path/unicorn.pid" sidekiq_pid_path="$pid_path/sidekiq.pid" ### Here ends user configuration ### # Switch to the app_user if it is not he/she who is running the script. if [ "$USER" != "$app_user" ]; then sudo -u "$app_user" -H -i $0 "$@"; exit; fi # Switch to the gitlab path, if it fails exit with an error. if ! cd "$app_root" ; then echo "Failed to cd into $app_root, exiting!"; exit 1 fi ### Init Script functions check_pids(){ if ! mkdir -p "$pid_path"; then echo "Could not create the path $pid_path needed to store the pids." exit 1 fi # If there exists a file which should hold the value of the Unicorn pid: read it. if [ -f "$web_server_pid_path" ]; then wpid=$(cat "$web_server_pid_path") else wpid=0 fi if [ -f "$sidekiq_pid_path" ]; then spid=$(cat "$sidekiq_pid_path") else spid=0 fi } # Checks whether the different parts of the service are already running or not. check_status(){ check_pids # If the web server is running kill -0 $wpid returns true, or rather 0. # Checks of *_status should only check for == 0 or != 0, never anything else. if [ $wpid -ne 0 ]; then kill -0 "$wpid" 2>/dev/null web_status="$?" else web_status="-1" fi if [ $spid -ne 0 ]; then kill -0 "$spid" 2>/dev/null sidekiq_status="$?" else sidekiq_status="-1" fi } check_pids check_status if [ "$web_status" != "0" -a "$sidekiq_status" != "0" ]; then echo "GitLab is not running." exit 2 fi if [ "$web_status" != "0" ]; then printf "The GitLab Unicorn webserver is \033[31mnot running\033[0m.\n" exit 1 fi if [ "$sidekiq_status" != "0" ]; then printf "The GitLab Sidekiq job dispatcher is \033[31mnot running\033[0m.\n" exit 1 fi if [ "$web_status" = "0" -a "$sidekiq_status" = "0" ]; then printf "GitLab and all it's components are \033[32mup and running\033[0m.\n" exit 0 fi

    Read the article

  • How can I change how OS X's 'say' command pronounces a word?

    - by jwhitlock
    OS X's say command is useful for some tasks (such as Skype's 'notify me when a contact comes online), but it is pronouncing some names incorrectly. Is there a way to teach say to pronounce a word differently? For example, try: say "Hi, Joel Spolsky" The 'ol' sounds like 'ball' rather than 'old'. I'd like to add an exception that say "Pronounce Spolsky like this", rather than try to teach new linguistic rules. I bet there is a way since it can pronounce "iphone" as Apple wants. Update - After some research, here's what I've learned: Text-to-speech is split between turning the text to phonemes, and then the phonemes are turned into audio using a voice. Changing the voice doesn't effect the phonemes. The Speech Synthesis Manager has some functions for turning text to phonemes, and a method for registering a speech dictionary that will add new text-phoneme maps. However, Apple's speech dictionary must be in a binary form - I didn't find any plist XML. Using dtrace while running say, I found some interesting files opened in /System/Library/PrivateFrameworks/SpeechDictionary.framework/Resources. This is probably the speech dictionary, but they are all binary, except for Homophones, which is XML. Adding entries to Homophones does nothing - it is probably used in speech-to-text. They are also code signed by Apple - changing them may prevent some programs from working. PrefixDictionary CartNames CartLite SymbolDictionary Homophones There are ways to add text versions of application interface elements so VoiceOver works, a lot of which a developer gets for free, but there are tricky bits. The standard here appears to be to use a phonetic spelling as needed. My guesses are: say is a light layer of code on top of the Speech Synthesis Manager. It would be easy for the Apple devs to add a command line option to take the path to a speech dictionary plist for alternate phoneme mapping, but they didn't. It may be a useful open-source project to write a better say. Skype probably uses Speech Synthesis Manager directly, leaving no hooks to change the way my friend's names are pronounced, other than spelling them phonetically, which is silly. The easiest way to make a command line version of say is how JRobert suggested. Here's my quick implementation, using Doug Harris's spelling suggestion: #!/bin/sh echo $@ | tr '[A-Z]' '[a-z]' | sed "s/spolsky/spowlsky/g" | /usr/bin/say Finally, some fun command line stuff: # Apple is weird sqlite3 /System/Library/PrivateFrameworks/SpeechDictionary.framework/Resources/Tuples .dump # Get too much information about what files are being opened sudo dtrace -n 'syscall::open*:entry { printf("%s %s",execname,copyinstr(arg0)); }' # Just fun say -v bad "Joel Spolsky Spolsky Spolsky Spolsky Spolsky, Joel Spolsky Spolsky Spolsky Spolsky Spolsky" echo "scale=1000; 4*a(1)" | bc -l | say

    Read the article

  • How to change the Nginx default folder?

    - by Ido Bukin
    I setup a server with Nginx and i set my Public_HTML in - /home/user/public_html/website.com/public And its always redirect to - /usr/local/nginx/html/ How can i change this ? Nginx.conf - user www-data www-data; worker_processes 4; events { worker_connections 1024; } http { include mime.types; default_type application/octet-stream; sendfile on; tcp_nopush on; tcp_nodelay off; keepalive_timeout 5; gzip on; gzip_comp_level 2; gzip_proxied any; gzip_types text/plain text/css application/x-javascript text/xml application/xml application/xml+rss text/javascript; include /usr/local/nginx/sites-enabled/*; } /usr/local/nginx/sites-enabled/default - server { listen 80; server_name localhost; location / { root html; index index.php index.html index.htm; } # redirect server error pages to the static page /50x.html error_page 500 502 503 504 /50x.html; location = /50x.html { root html; } } /usr/local/nginx/sites-available/website.com - server { listen 80; server_name website.com; rewrite ^/(.*) http://www.website.com/$1 permanent; } server { listen 80; server_name www.website.com; access_log /home/user/public_html/website.com/log/access.log; error_log /home/user/public_html/website.com/log/error.log; location / { root /home/user/public_html/website.com/public/; index index.php index.html; } # pass the PHP scripts to FastCGI server listening on # 127.0.0.1:9000 location ~ \.php$ { fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; include /usr/local/nginx/conf/fastcgi_params; fastcgi_param SCRIPT_FILENAME /home/user/public_html/website.com/public/$fastcgi_script_name; } } The error message I get is Fatal error: require_once() [function.require]: Failed opening required '/usr/local/nginx/html/202-config/functions.php' the server try to find the file in the Nginx folder and not in my Public_Html

    Read the article

  • Why did Intel drop the Itanium?

    - by Cole Johnson
    I was reading up on the history of the computer and I came along the IA-64 (Itanium) processors. They sounded really interesting and I was confused as to why Intel would decide to drop them. The ability to choose explicitly what 2 instructions you wanted to run in that cycle is a great idea, especially when writing your program in assembly, for example, a faster bootloader. The hundreds of registers should be convincing for any assembly programmer. You could essentially store all the functions variables in the registers if it doesn't call any other ones. The ability to do instructions like this: (qp) xor r1 = r2, r3 ; r1 = r2 XOR r3 (qp) xor r1 = (imm8), r3 ; r1 = (imm8) XOR r3 versus having to do: ; eax = r1 ; ebx = r2 ; ecx = r3 mov eax, ebx ; first put r2 into r1 xor eax, ecx ; then set r1 equivalent to r2 XOR r3 or ; SAME mov eax, (imm32) ; first put (imm32) into r1 xor eax, ecx ; then set r1 equivalent to (imm32) XOR r3 I heard it was because of no backwards x86 comparability, but couldn't thy be fixed by just adding the Pentium circuitry to it and just add a processor flag that would switch it to Itanium mode (like switching to Protected or Long mode) All the great things about it would have surly put them a giant leap ahead of AMD. Any ideas? Sadly this means you will need a very advanced compiler to do this. Or even one per specific model of the CPU. (E.g. a newer version of the Itanium with an extra feature would require different compiler). When I was working on a WinForms (target only had .NET 2.0) project in Visual Studio 2010, I had a compile target of IA-64. That means that there is a .NET runtime that was able to be compiled for IA-64 and a .NET runtime means Windows. Plus, Hamilton's answer mentions Windows NT. Having a full blown OS like Windows NT means that there is a compiler capable of generating IA-64 machine code.

    Read the article

  • Setting up Virtual Hosts with Apache on Windows 2008 server for multiple sites. Complicated setup, including subversion

    - by Roeland
    I am setting up apache on my windows 2008 server at my home. It will serve 2 functions. Subversion hosting to allow me and some others to manage company documents with version control Local website hosting for web development. Will need to run several websites since I generally work on more then one site at a time. Heres what I have done so far. I set up subversion and apache 2.2 using some walk troughs. I changed the default port to 1337. (im a nerd) Using dyndns.com I created a domain to forward to my home ip which is dynamic. ( company.gotdns.org) I then went into my DNS for my company.com and added a record to point repo.company.com to company.gotdns.org At this point people who need access to my file repository can access by going to repo.company.com/repo which is good so far. My question comes on the next step, setting up virtual hosts with apache. Ideally I would like to have my local website be viewable by some others in the company from their homes. So, say I am working on site1, I would like to have them be able to view this by going site1.roeland.bythepixel.com. At the same time, I would like to have site10.wouter.bythepixel.com go to his local setup for site10. What I have done for this: I went into my DNS for company.com and added a record to point roeland.company.com to company.gotdns.org (which translates to my ip). I added code to my httpd-vhosts.conf (listed at bottom) I added code to my host file (listed at bottom) Hah, so of course this doenst work as excepted.. going to site1.roeland.bythepixel.com doesnt bring up my test1 site. Could anyone point me where I may be going wrong? Thanks! hosts: 127.0.0.1 localhost 127.0.0.1 sensenich.roeland.bythepixel.com ::1 localhost httpd-vhosts.conf: <VirtualHost *:80> ServerAdmin [email protected] DocumentRoot "F:/Current Projects/sensenich.com" ServerName sensenich.roeland.bythepixel.com ErrorLog "logs/sensenich.roeland.bythepixel.com-error.log" CustomLog "logs/sensenich.roeland.bythepixel.com-access.log" common </VirtualHost>

    Read the article

  • VPN Connection Causes Internal LAN Connection Loss with Server

    - by sleepisfortheweak
    I've tried configuring basic PPTP VPN at my small business using a number of different tutorials. As far as I can tell, the actual VPN connection worked fine, but upon connecting a client, the Server 'disappears' from the internal LAN. The RRAS service must be stopped before the connection is restored. My Setup: The network is simply a DSL Gateway/Router to the outside functioning as NAT/Firewall/DHCP. The server is a Win Server 2008 machine at fixed IP 192.168.1.200. The server has 1 NIC, so I used the 'custom' option when configuring RRAS. The RRAS settings should be default except that I've disabled ports for connection types I'm not using and reduced PPTP ports to 10. I've also created an address pool and disabled DHCP packet forwarding. The server only functions as a File Share and now a VPN Server. Local LAN computers all have mapped network shares to the server authenticated based on Local User/Group setup on the server. The Problem: The moment a client connects through VPN, the server 'disappears' from the local network. All mapped drives disconnect and there is no response to a ping 192.168.1.200. Even if the client disconnects, the server does not re-appear at that address until the RRAS service is stopped. I've Tried: Using an Address Pool inside and outside the local subnet. Using DCHP Relay Checking Inbound/Outbound filters (none enabled) The fact that nothing I've tried has had any effect, and that I can connect and successfully obtain an IP tells me that it's something more fundamental I'm missing. My gut tells me that it's something to do with the second IP address added by the VPN client somehow taking over the interface or traffic from the local LAN accidently getting routed to the VPN client instead of handled at the server once RRAS has become 'active' when a client connects. Hopefully this may be obvious to someone with real IT experience. I've been doing this a while and almost never been stumped. I'm starting to think it might actually be something tricky since my setup is pretty basic yet refuses to work. I'll be happy to include more info if this doesn't ring any bells right away for anyone. Thanks

    Read the article

  • Why does this service refuse to start on Windows server 2003?

    - by PenguinCoder
    We have a Windows 2003 server with Cebos MQ1 (ver. 7 and ver. GRI) products installed that have been operational for years. After installing Microsoft 2010 C++ Redistributable package needed for other development, the MQ1 GRI service now fails to start. Event logs showed that two additional updates (.NET4 and the 2010 C++ Redistributable SP2) where installed by the redistributable as well. As soon as we discovered the MQ1 service was not starting properly, we removed these three installed packages. However the service still does not start; the dialog that pops up states 'The service started then stopped. '. Event logs when we attempt to start the service show nothing; IE: No errors, crashes, failures, or other information related to this service. Executing the MQ1Serv.exe directly specifies an issue of 'Missing command line operation, must specify install, uninstall and company abbreviation.' sc query MQ1Service(GRI) shows a clean exit for the Win32ExitCode of 0x0. Attempting to reinstall the client or server software gives an error of 'The procedure entry point ReInitializeCriticalSection could not be located in the dynamic link library KERNEL32.dll.' at the 'Registering Libraries' stage. At this point, further research has stated that the required function is in URL.dll and to verify the library is not corrupted. Running an sfc /scannow on the server has replaced a few DLLS; including the URL.DLL to versions from 2005. This actually broke other applications which required a reinstall (one of them being IE 7). After reinstall and updates, url.dll version is 7.0.5730.13 (2009) and Kernel32.dll is version 5.2.3790.4480 (2009). The MQ1 GRI service still will not start, specifying the same error as previous 'Service started then stopped'. Running a disassembler on Kernel32.dll and Url.dll show no functions named ReinitializeCriticalSection. Attempting the reinstall of the MQ1 client and server as well as starting the service again, fails once more. However, setting the compatibility mode on the MQ1 client install exe to 'Windows 95' actually gets the program to install. Setting the compatibility mode on the MQ1 server service does not enable it to start. I have been researching this problem for nearly a week and besides the advice to scan and replace url.dll, have come to no successful conclusions. This service was operational prior to the 2010 C++ install, without any additional parameters or settings. After removing the C++ install and all servicepacks/updates it installed silently, still does not correct the issue of the MQ1 GRI service not starting. Q: Has anyone else run into this or similar issue while attempting to get a service initialized? What have I overlooked or what else can I try in order to get this service started??

    Read the article

  • What networking hardware do I need in this situation (Fairpoint [ISP] "E-DIA" connection)?

    - by Tegeril
    Right away you'd probably want to say, "Well just ask Fairpoint." I've done that, a number of times in as many different ways I can phrase it and just keep hitting a brick wall where they will not commit to giving any useful information and instead recommend contracting an outside firm and spending a pile of money. Anyway... I'm trying to help a family member out with an office connection that is being setup. I've managed to scrape tiny details here and there from our discussions with the ISP (Fairpoint in Maine) about what is going to be done and what is going to be needed. This is the connection that is being setup: http://www.fairpoint.com/enterprise/vantagepoint/e-dia/index.jsp Information I have been given: Via this connection I can get IPs across different C blocks if that were necessary (it is not) Fairpoint is bringing hardware with them that they claim simply does the conversion from whatever line is coming in the building to ethernet, they have referred to this as the "Fairpoint Netvanta" which I know suggests a line of products that I have looked up, but some (most? all?) of those seems to handle all the routing that I saw. Fairpoint says that I need to bring my own router to sit behind their device. They have literally declined to even suggest products that have worked for other clients in the past and fall back on "any business router works, not a home router." That alone makes my head spin. Detail and clarity hit a brick wall from there. At one moment I got them to cough up that the router I provide needs to be able to do VPN tunneling but they typically fall back to "not a home router" and I was even given "just a business router, Cisco or something, it'll be $500-$1000". Now I know that VPN tunneling routers exist well below that price point and since this connection is going to one machine, possibly two only via ethernet, my desire to purchase networking hardware that over-delivers what I need is not very high. They are literally setting all this up, have provided no configuration details for after they finish, and expect me to just plunk a $500+ router behind it and cross my fingers or contract out to a third party company. If there were other options available for the location, I would have dropped them in a second, but there aren't. The device that is connected requires a static IP and I'm honestly a bit hazy on the necessity of an additional router behind their device and generally a bit over my head. I presume that the router needs to be able to serve external static IPs to its clients, but I really don't know what is going to show up when they come to do the install. This was originally going to be run via an ADSL bridge modem with a range of static IPs (which is easy and is currently setup properly) but the location is too far from the telco to get speeds that we really want for upload and this is also a connection that needs high availability. Any suggestions would be greatly appreciated (I see a number of options in the Cisco Small Business line and other competitors that aren't going to break the bank…), especially if you've worked with Fairpoint before! Thanks for reading my wall of text.

    Read the article

  • Need help recovering a corrupt SQL database

    - by user570079
    I have a very special case that I have been working on for several days. I have a very large SQL Server 2008 database (about 2 TB) that contains 500 filegroups to support very large partitioned tables. Recently we had a catastophic failure on one of the drive and lost several filegroups and the database became in-accessible. We have been doing filegroup backups on a daily basis, but due to other issues, we lost our most recent backup of the log and the primary filegroup. We have all the data backed up but the primary filegroup backup is old. There have been no schema changes since the primary filegroup backup, but the lsn's are now all out of sync and we cannot recover the data. I have tried everything I could think of (and have tried just about every trick and hack I could google) but I still end up at the same point where I get messages saying that the files for filegroup x do not match the primary filegroup. I am now at the point of trying to edit the system tables (we have a separate temporary environment to do this so we are not worried about corrupting any production databases). I have tried updated sys.sysdbreg, sys.sysbrickfiles, and sys.sysprufiles to try to trick SQL into thinking all the files are online, but a "Select * From OPENROWSET(TABLE DBPROP, 5)" shows a different database state from what I see in sys.sysdbreg. I am now thinking I need to somehow edit the headers of the actual data files to try to line up the lsn's with the primary. I appreciate any help anyone can give me here, but please do not respond with things like "you are not supposed to do edit mdf, ndf files...." or "see msdn article....", etc. This is an advanced emergency case and I need a real hack so we can just get to the data in this corrupt database and export to a fresh new database. I know there is a way to do this, but not knowing what the DBPROP system functions does (i.e. does it look at system tables or does it actually open the file) is keeping me from trying to figure out how to fool SQL into allowing me to read these files. Thanks for any help.

    Read the article

  • bluetooth connection using pybluez

    - by srj0408
    I am working on bluetooth not exactly on bluetooth stack-development but to use bluetooth in one of my project. I had done all that before using some of the py-bluez commands like hciconfig, hcitool scan , then simple-agents and using serial module inside python. But that was quite random. We were able to connect only one specific device based on its bluetooth address and there was no facility of reconnection once the devices are disconnected. Now i want to try out this stuff in a sequential manner like this (i am doing that all on a RPI and for at present on ubuntu 12.04.) i) Store some names in a file along with some other information with respect to that device. ii) Run a script to find out the device in locality with those names and if any one if found, report that. For this step, i had taken a reference from BTBook , made available from MIT. Below is the script for the same, but that script only search for the single name. from bluetooth import * target_name = "XT1033" target_address = None nearby_devices = discover_devices() for address in nearby_devices: if target_name == lookup_name( address ): target_address = address break if target_address is not None: print "found target bluetooth device with address ", target_address connect_socket(target_address); else: print "could not find target bluetooth device nearby" iii) Connect the device using client sock. But i dont have any device on which i can write a simple python script. My client can be any device that will be publishing data. Now i came through a script in the same book, that actually connect to a client requesting permission to connect to server. from bluetooth import * port = 1 server_sock=BluetoothSocket( RFCOMM ) server_sock.bind(("",port)) server_sock.listen(1) client_sock, client_info = server_sock.accept() print "Accepted connection from ", client_info data = client_sock.recv(1024) print "received [%s]" % data client_sock.close() server_sock.close() here client_sock, client_info = server_sock.accept() provide the client address and port requested to be connected. Can i pass address obtained from the earlier script to this, so that it connect server to the client? iv) Then if client get disconnected, re-connect(a simple polling can be used.) All this stuff can be done using bash and py-bluez functions but i want to do that in a sequential manner.I am not a master in python but i can do some small stuff. Can any one guide me for the same or can direct me to more usefull resource through which i can continue my coding part after finding the "X", "Y" named devices.

    Read the article

  • How to get attribute value using SelectSingleNode?

    - by Nano HE
    I am parsing a xml document, I need find out the gid (an attribute) value (3810). Based on SelectSingleNode(). I found it is not easy to find the attribute name and it's value. Can I use this method or I must switch to other way. Attached my code. How can I use book obj to get the attribute value3810 for gid. Thank you. My test.xml file as below <?xml version="1.0" ?> <root> <VersionInfo date="2007-11-28" version="1.0.0.2" /> <Attributes> <AttrDir name="EFEM" DirID="1"> <AttrDir name="Aligner" DirID="2"> <AttrDir name="SequenceID" DirID="3"> <AttrObj text="Slot01" gid="3810" unit="" scale="1" /> <AttrObjCount value="1" /> </AttrDir> </AttrDir> </AttrDir> </Attributes> </root> I wrote the test.cs as below public class Sample { public static void Main() { XmlDocument doc = new XmlDocument(); doc.Load("test.xml"); XmlNode book; XmlNode root = doc.DocumentElement; book = root.SelectSingleNode("Attributes[AttrDir[@name='EFEM']/AttrDir[@name='Aligner']/AttrDir[@name='SequenceID']/AttrObj[@text='Slot01']]"); Console.WriteLine("Display the modified XML document...."); doc.Save(Console.Out); } } [Update 06/10/2010] The xml file is a complex file. Included thousands of gids. But for each of Xpath, the gid is unique. I load the xml file to a TreeView control. this.treeView1.AfterSelect += new System.Windows.Forms.TreeViewEventHandler(this.treeView1_AfterSelect);. When treeView1_AfterSelect event occurred, the e.Node.FullPath will return as a String Value. I parse the string Value e.Node.FullPath. Then I got the member of XPath Above. Then I tried to find which gid item was selected. I need find the gid value as a return value indeed.

    Read the article

  • AutoMapper recursive

    - by fra
    Hi! I would like to make a deep copy of a complex object tree using AutoMapper. The problem is that for each member I would like to construct a new object and then map it, and not simply copying the existing one. Here it is an example: public abstract class Test { public Test() { this.Id = Guid.NewGuid(); } public Guid Id { get; private set; } } public class OuterTest : Test { public InnerTest Inner { get; set; } } public class InnerTest : Test { public int Value { get; set; } } and how to test it: OuterTest outerDest = Mapper.Map<OuterTest, OuterTest>(outerSource); System.Diagnostics.Debug.WriteLine("InnerSource id: " + innerSource.Id); System.Diagnostics.Debug.WriteLine("InnerSource value: " + innerSource.Value); System.Diagnostics.Debug.WriteLine("OuterSource id: " + outerSource.Id); System.Diagnostics.Debug.WriteLine("OuterDest id: " + outerDest.Id); System.Diagnostics.Debug.WriteLine("OuterDest.Inner id: " + outerDest.Inner.Id); System.Diagnostics.Debug.WriteLine("OuterDest.Inner value: " + outerDest.Inner.Value); This is the result from the output window: InnerSource id: a60fda37-206a-40a8-a7f8-db480149c906 InnerSource value: 2119686684 OuterSource id: 7486899e-2da8-4873-9160-d6096b555c73 OuterDest id: 7486899e-2da8-4873-9160-d6096b555c73 OuterDest.Inner id: a60fda37-206a-40a8-a7f8-db480149c906 OuterDest.Inner value: 2119686684 The problem is thet the object innerSource is always the same instance as outerDest.Inner (I verified through MakeObjectId of VS debugger) but I would like them to be two different instances. How could I create a recursive map with this behavior? I tried creating a custom IValueResolver like the following, without success. public class AutoMapperNewObjectResolver : IValueResolver { public ResolutionResult Resolve(ResolutionResult source) { object resolved; if (source.Value != null) { object instance = Activator.CreateInstance(source.MemberType); resolved = Mapper.Map(source.Value, instance, source.MemberType, source.MemberType); } else { resolved = null; } ResolutionResult result = source.New(resolved, source.Context.DestinationType); return result; } } and configured like this: Mapper.CreateMap<OuterTest, OuterTest>() .ForMember(d => d.Inner, o => o.ResolveUsing<AutoMapperNewObjectResolver>().FromMember(src => src.Inner)); Any help appreciated, thank you

    Read the article

  • ASP.NET 3.5 GridView - row editing - dynamic binding to a DropDownList

    - by marc_s
    This is driving me crazy :-) I'm trying to get a ASP.NET 3.5 GridView to show a selected value as string when being displayed, and to show a DropDownList to allow me to pick a value from a given list of options when being edited. Seems simple enough? My gridview looks like this (simplified): <asp:GridView ID="grvSecondaryLocations" runat="server" DataKeyNames="ID" OnInit="grvSecondaryLocations_Init" OnRowCommand="grvSecondaryLocations_RowCommand" OnRowCancelingEdit="grvSecondaryLocations_RowCancelingEdit" OnRowDeleting="grvSecondaryLocations_RowDeleting" OnRowEditing="grvSecondaryLocations_RowEditing" OnRowUpdating="grvSecondaryLocations_RowUpdating" > <Columns> <asp:TemplateField> <ItemTemplate> <asp:Label ID="lblPbxTypeCaption" runat="server" Text='<%# Eval("PBXTypeCaptionValue") %>' /> </ItemTemplate> <EditItemTemplate> <asp:DropDownList ID="ddlPBXTypeNS" runat="server" Width="200px" DataTextField="CaptionValue" DataValueField="OID" /> </EditItemTemplate> </asp:TemplateField> </asp:GridView> The grid gets displayed OK when not in editing mode - the selected PBX type shows its value in the asp:Label control. No surprise there. I load the list of values for the DropDownList into a local member called _pbxTypes in the OnLoad event of the form. I verified this - it works, the values are there. Now my challenge is: when the grid goes into editing mode for a particular row, I need to bind the list of PBX's stored in _pbxTypes. Simple enough, I thought - just grab the drop down list object in the RowEditing event and attach the list: protected void grvSecondaryLocations_RowEditing(object sender, GridViewEditEventArgs e) { grvSecondaryLocations.EditIndex = e.NewEditIndex; GridViewRow editingRow = grvSecondaryLocations.Rows[e.NewEditIndex]; DropDownList ddlPbx = (editingRow.FindControl("ddlPBXTypeNS") as DropDownList); if (ddlPbx != null) { ddlPbx.DataSource = _pbxTypes; ddlPbx.DataBind(); } .... (more stuff) } Trouble is - I never get anything back from the FindControl call - seems like the ddlPBXTypeNS doesn't exist (or can't be found). What am I missing?? Must be something really stupid.... but so far, all my Googling, reading up on GridView controls, and asking buddies hasn't helped. Who can spot the missing link? ;-) Marc

    Read the article

  • Overlay bitmap on live video

    - by sijith
    Hi i want to Overlay bitmap on live video. Iam trying to do this with the directshow sample. I edited PlayCapMonker sample and added some functions to enable this. i did this with the procedure explained in below link http://www.ureader.com/msg/1471251.aspx Now i am gettting errors Error 2 error C4430: missing type specifier - int assumed. Note: C++ does not support default-int Error 3 error C4430: missing type specifier - int assumed. Note: C++ does not support default-int Error 5 error C4430: missing type specifier - int assumed. Note: C++ does not support default-int Error 6 error C4430: missing type specifier - int assumed. Note: C++ does not support default-int Error 8 error C4430: missing type specifier - int assumed. Note: C++ does not support default-int Error 9 error C4430: missing type specifier - int assumed. Note: C++ does not support default-int Error 21 error C4430: missing type specifier - int assumed. Note: C++ does not support default-int Error 22 error C4430: missing type specifier - int assumed. Note: C++ does not support default-int Error 26 error C4430: missing type specifier - int assumed. Note: C++ does not support default-int Error 27 error C4430: missing type specifier - int assumed. Note: C++ does not support default-int Error 36 error C2228: left of '.m_alpha' must have class/struct/union Error 38 error C2227: left of '-SetAlphaBitmap' must point to class/struct/union/generic type Error 7 error C2146: syntax error : missing ';' before identifier 'Pool' Error 4 error C2146: syntax error : missing ';' before identifier 'Format' c:\Program Files\Microsoft Platform SDK\include\Vmr9.h 368 PlayCapMoniker Error 1 error C2143: syntax error : missing ';' before '' Error 20 error C2143: syntax error : missing ';' before '' Error 25 error C2143: syntax error : missing ';' before '*' Error 30 error C2065: 'g_pMixerBitmap' : undeclared identifier Error 33 error C2065: 'g_pMixerBitmap' : undeclared identifier Error 37 error C2065: 'g_pMixerBitmap' : undeclared identifier Error 31 error C2065: 'g_hbm' : undeclared identifier Error 32 error C2065: 'g_hbm' : undeclared identifier Error 35 error C2065: 'config' : undeclared identifier Error 10 error C2061: syntax error : identifier 'IDirect3DSurface9' Error 11 error C2061: syntax error : identifier 'IDirect3DSurface9' Error 12 error C2061: syntax error : identifier 'IDirect3DSurface9' Error 13 error C2061: syntax error : identifier 'IDirect3DSurface9' Error 16 error C2061: syntax error : identifier 'IDirect3DSurface9' Error 19 error C2061: syntax error : identifier 'IDirect3DSurface9' Error 23 error C2061: syntax error : identifier 'IDirect3DSurface9' Error 24 error C2061: syntax error : identifier 'IDirect3DSurface9' Error 28 error C2061: syntax error : identifier 'IDirect3DSurface9' Error 29 error C2061: syntax error : identifier 'IDirect3DSurface9' Error 14 error C2061: syntax error : identifier 'IDirect3DDevice9' Error 15 error C2061: syntax error : identifier 'IDirect3DDevice9' Error 17 error C2061: syntax error : identifier 'IDirect3DDevice9' Error 18 error C2061: syntax error : identifier 'IDirect3DDevice9' Error 34 error C2039: 'pDDS' : is not a member of '_VMR9AlphaBitmap' SDK\Samples\Multimedia\DirectShow\Capture\PlayCapMoniker\PlayCapMoniker.cpp 263 PlayCapMoniker

    Read the article

  • build error with boost spirit grammar (boost 1.43 and g++ 4.4.1)

    - by lurscher
    I'm having issues getting a small spirit/qi grammar to compile. The build stack trace is fugly enought to not make any sense to me (despite some assertion_failed i could notice in there but that didn't brought much information) the input grammar header: inputGrammar.h #include <boost/config/warning_disable.hpp> #include <boost/spirit/include/qi.hpp> #include <boost/spirit/include/phoenix_core.hpp> #include <boost/spirit/include/phoenix_operator.hpp> #include <boost/spirit/include/phoenix_fusion.hpp> #include <boost/spirit/include/phoenix_stl.hpp> #include <boost/fusion/include/adapt_struct.hpp> #include <boost/variant/recursive_variant.hpp> #include <boost/foreach.hpp> #include <iostream> #include <fstream> #include <string> #include <vector> namespace sp = boost::spirit; namespace qi = boost::spirit::qi; using namespace boost::spirit::ascii; //using namespace boost::spirit::arg_names; namespace fusion = boost::fusion; namespace phoenix = boost::phoenix; using phoenix::at_c; using phoenix::push_back; template< typename Iterator , typename ExpressionAST > struct InputGrammar : qi::grammar<Iterator, ExpressionAST(), space_type> { InputGrammar() : InputGrammar::base_type( block ) { tag = sp::lexeme[+(alpha) [sp::_val += sp::_1]];//[+(char_ - '<') [_val += _1]]; block = sp::lit("block") [ at_c<0>(sp::_val) = sp::_1] >> "(" >> *instruction[ push_back( at_c<1>(sp::_val) , sp::_1 ) ] >> ")"; command = tag [ at_c<0>(sp::_val) = sp::_1] >> "(" >> *instruction [ push_back( at_c<1>(sp::_val) , sp::_1 )] >> ")"; instruction = ( command | tag ) [sp::_val = sp::_1]; } qi::rule< Iterator , std::string() , space_type > tag; qi::rule< Iterator , ExpressionAST() , space_type > block; qi::rule< Iterator , ExpressionAST() , space_type > function_def; qi::rule< Iterator , ExpressionAST() , space_type > command; qi::rule< Iterator , ExpressionAST() , space_type > instruction; }; the test build program: i seems the build fails at qi::phrase_parse, i am using boost 1.43 and g++ 4.4.1 #include <iostream> #include <string> #include <vector> using namespace std; //my grammar #include <InputGrammar.h> struct MockExpressionNode { std::string name; std::vector< MockExpressionNode > operands; typedef std::vector< MockExpressionNode >::iterator iterator; typedef std::vector< MockExpressionNode >::const_iterator const_iterator; iterator begin() { return operands.begin(); } const_iterator begin() const { return operands.begin(); } iterator end() { return operands.end(); } const_iterator end() const { return operands.end(); } bool is_leaf() const { return ( operands.begin() == operands.end() ); } }; BOOST_FUSION_ADAPT_STRUCT( MockExpressionNode, (std::string, name) (std::vector<MockExpressionNode>, operands) ) int const tabsize = 4; void tab(int indent) { for (int i = 0; i < indent; ++i) std::cout << ' '; } template< typename ExpressionNode > struct ExpressionNodePrinter { ExpressionNodePrinter(int indent = 0) : indent(indent) { } void operator()(ExpressionNode const& node) const { cout << " tag: " << node.name << endl; for (int i=0 ; i < node.operands.size() ; i++ ) { tab( indent ); cout << " arg "<<i<<": "; ExpressionNodePrinter(indent + 2)( node.operands[i]); cout << endl; } } int indent; }; int test() { MockExpressionNode root; InputGrammar< string::const_iterator , MockExpressionNode > g(); std::string litA = "litA"; std::string litB = "litB"; std::string litC = "litC"; std::string litD = "litD"; std::string litE = "litE"; std::string litF = "litF"; std::string source = litA+"( "+litB+" ,"+litC+" , "+ litD+" ( "+litE+", "+litF+" ) "+ " )"; string::const_iterator iter = source.begin(); string::const_iterator end = source.end(); bool r = qi::phrase_parse( iter , end , g , root , space ); ExpressionNodePrinter< MockExpressionNode > np; np( root ); }; int main() { test(); } finally, the build error is the following: /usr/bin/make -f nbproject/Makefile-linux_amd64_devel.mk SUBPROJECTS= .build-conf make[1]: se ingresa al directorio `/home/mineq/NetBeansProjects/InputParserTests' /usr/bin/make -f nbproject/Makefile-linux_amd64_devel.mk dist/linux_amd64_devel/GNU-Linux-x86/vpuinputparsertests make[2]: se ingresa al directorio `/home/mineq/NetBeansProjects/InputParserTests' mkdir -p build/linux_amd64_devel/GNU-Linux-x86 rm -f build/linux_amd64_devel/GNU-Linux-x86/tests_main.o.d g++ `llvm-config --cxxflags` `pkg-config --cflags unittest-cpp` `pkg-config --cflags boost-1.43` `pkg-config --cflags boost-coroutines` -c -g -I../InputParser -MMD -MP -MF build/linux_amd64_devel/GNU-Linux-x86/tests_main.o.d -o build/linux_amd64_devel/GNU-Linux-x86/tests_main.o tests_main.cpp from /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/auto.hpp:16, from /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi.hpp:15, from /home/mineq/third_party/boost_1_43_0/boost/spirit/include/qi.hpp:16, from ../InputParser/InputGrammar.h:12, from tests_main.cpp:14: /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/parse.hpp: In function ‘bool boost::spirit::qi::phrase_parse(Iterator&, Iterator, const Expr&, const Skipper&, boost::spirit::qi::skip_flag::enum_type, Attr&) [with Iterator = __gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, Expr = InputGrammar<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode>(), Skipper = MockExpressionNode, Attr = const boost::proto::exprns_::expr<boost::proto::tag::terminal, boost::proto::argsns_::term<boost::spirit::tag::char_code<boost::spirit::tag::space, boost::spirit::char_encoding::ascii> >, 0l>]’: In file included from /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/detail/parse_auto.hpp:14, /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/parse.hpp:125: instantiated from ‘bool boost::spirit::qi::phrase_parse(Iterator&, Iterator, const Expr&, const Skipper&, Attr&) [with Iterator = __gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, Expr = InputGrammar<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode>(), Skipper = MockExpressionNode, Attr = const boost::spirit::ascii::space_type]’ tests_main.cpp:206: instantiated from here /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/parse.hpp:99: error: no matching function for call to ‘assertion_failed(mpl_::failed************ (boost::spirit::qi::phrase_parse(Iterator&, Iterator, const Expr&, const Skipper&, boost::spirit::qi::skip_flag::enum_type, Attr&) [with Iterator = __gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, Expr = InputGrammar<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode>(), Skipper = MockExpressionNode, Attr = const boost::proto::exprns_::expr<boost::proto::tag::terminal, boost::proto::argsns_::term<boost::spirit::tag::char_code<boost::spirit::tag::space, boost::spirit::char_encoding::ascii> >, 0l>]::error_invalid_expression::************)(InputGrammar<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode> (*)()))’ /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/parse.hpp:125: instantiated from ‘bool boost::spirit::qi::phrase_parse(Iterator&, Iterator, const Expr&, const Skipper&, Attr&) [with Iterator = __gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, Expr = InputGrammar<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode>(), Skipper = MockExpressionNode, Attr = const boost::spirit::ascii::space_type]’ tests_main.cpp:206: instantiated from here /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/parse.hpp:100: error: no matching function for call to ‘assertion_failed(mpl_::failed************ (boost::spirit::qi::phrase_parse(Iterator&, Iterator, const Expr&, const Skipper&, boost::spirit::qi::skip_flag::enum_type, Attr&) [with Iterator = __gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, Expr = InputGrammar<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode>(), Skipper = MockExpressionNode, Attr = const boost::proto::exprns_::expr<boost::proto::tag::terminal, boost::proto::argsns_::term<boost::spirit::tag::char_code<boost::spirit::tag::space, boost::spirit::char_encoding::ascii> >, 0l>]::error_invalid_expression::************)(MockExpressionNode))’ from /home/mineq/third_party/boost_1_43_0/boost/proto/proto.hpp:12, from /home/mineq/third_party/boost_1_43_0/boost/spirit/home/support/meta_compiler.hpp:17, from /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/meta_compiler.hpp:14, from /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/action/action.hpp:14, from /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/action.hpp:14, from /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi.hpp:14, from /home/mineq/third_party/boost_1_43_0/boost/spirit/include/qi.hpp:16, from ../InputParser/InputGrammar.h:12, from tests_main.cpp:14: /home/mineq/third_party/boost_1_43_0/boost/proto/detail/expr0.hpp: At global scope: /home/mineq/third_party/boost_1_43_0/boost/proto/proto_fwd.hpp: In instantiation of ‘boost::proto::exprns_::expr<boost::proto::tag::terminal, boost::proto::argsns_::term<InputGrammar<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode>()>, 0l>’: In file included from /home/mineq/third_party/boost_1_43_0/boost/proto/core.hpp:13, /home/mineq/third_party/boost_1_43_0/boost/utility/enable_if.hpp:59: instantiated from ‘boost::disable_if<boost::proto::result_of::is_expr<boost::proto::exprns_::expr<boost::proto::tag::terminal, boost::proto::argsns_::term<InputGrammar<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode>()>, 0l>, void>, void>’ /home/mineq/third_party/boost_1_43_0/boost/spirit/home/support/meta_compiler.hpp:200: instantiated from ‘boost::spirit::result_of::compile<boost::spirit::qi::domain, InputGrammar<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode>(), boost::fusion::unused_type, void>’ /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/parse.hpp:107: instantiated from ‘bool boost::spirit::qi::phrase_parse(Iterator&, Iterator, const Expr&, const Skipper&, boost::spirit::qi::skip_flag::enum_type, Attr&) [with Iterator = __gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, Expr = InputGrammar<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode>(), Skipper = MockExpressionNode, Attr = const boost::proto::exprns_::expr<boost::proto::tag::terminal, boost::proto::argsns_::term<boost::spirit::tag::char_code<boost::spirit::tag::space, boost::spirit::char_encoding::ascii> >, 0l>]’ /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/parse.hpp:125: instantiated from ‘bool boost::spirit::qi::phrase_parse(Iterator&, Iterator, const Expr&, const Skipper&, Attr&) [with Iterator = __gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, Expr = InputGrammar<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode>(), Skipper = MockExpressionNode, Attr = const boost::spirit::ascii::space_type]’ tests_main.cpp:206: instantiated from here /home/mineq/third_party/boost_1_43_0/boost/proto/detail/expr0.hpp:64: error: field ‘boost::proto::exprns_::expr<boost::proto::tag::terminal, boost::proto::argsns_::term<InputGrammar<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode>()>, 0l>::child0’ invalidly declared function type from /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/auto.hpp:16, from /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi.hpp:15, from /home/mineq/third_party/boost_1_43_0/boost/spirit/include/qi.hpp:16, from ../InputParser/InputGrammar.h:12, from tests_main.cpp:14: /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/parse.hpp: In function ‘bool boost::spirit::qi::phrase_parse(Iterator&, Iterator, const Expr&, const Skipper&, boost::spirit::qi::skip_flag::enum_type, Attr&) [with Iterator = __gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, Expr = InputGrammar<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode>(), Skipper = MockExpressionNode, Attr = const boost::proto::exprns_::expr<boost::proto::tag::terminal, boost::proto::argsns_::term<boost::spirit::tag::char_code<boost::spirit::tag::space, boost::spirit::char_encoding::ascii> >, 0l>]’: In file included from /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/detail/parse_auto.hpp:14, /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/parse.hpp:125: instantiated from ‘bool boost::spirit::qi::phrase_parse(Iterator&, Iterator, const Expr&, const Skipper&, Attr&) [with Iterator = __gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, Expr = InputGrammar<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode>(), Skipper = MockExpressionNode, Attr = const boost::spirit::ascii::space_type]’ tests_main.cpp:206: instantiated from here /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/parse.hpp:107: error: request for member ‘parse’ in ‘boost::spirit::compile [with Domain = boost::spirit::qi::domain, Expr = InputGrammar<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode>()](((InputGrammar<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode> (&)())((InputGrammar<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode> (*)())expr)))’, which is of non-class type ‘InputGrammar<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode>()’ from /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/auto.hpp:15, from /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi.hpp:15, from /home/mineq/third_party/boost_1_43_0/boost/spirit/include/qi.hpp:16, from ../InputParser/InputGrammar.h:12, from tests_main.cpp:14: /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/skip_over.hpp: In function ‘void boost::spirit::qi::skip_over(Iterator&, const Iterator&, const T&) [with Iterator = __gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, T = boost::spirit::qi::phrase_parse(Iterator&, Iterator, const Expr&, const Skipper&, boost::spirit::qi::skip_flag::enum_type, Attr&) [with Iterator = __gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, Expr = InputGrammar<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode>(), Skipper = MockExpressionNode, Attr = const boost::proto::exprns_::expr<boost::proto::tag::terminal, boost::proto::argsns_::term<boost::spirit::tag::char_code<boost::spirit::tag::space, boost::spirit::char_encoding::ascii> >, 0l>]::skipper_type]’: In file included from /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/auto/auto.hpp:19, /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/parse.hpp:112: instantiated from ‘bool boost::spirit::qi::phrase_parse(Iterator&, Iterator, const Expr&, const Skipper&, boost::spirit::qi::skip_flag::enum_type, Attr&) [with Iterator = __gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, Expr = InputGrammar<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode>(), Skipper = MockExpressionNode, Attr = const boost::proto::exprns_::expr<boost::proto::tag::terminal, boost::proto::argsns_::term<boost::spirit::tag::char_code<boost::spirit::tag::space, boost::spirit::char_encoding::ascii> >, 0l>]’ /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/parse.hpp:125: instantiated from ‘bool boost::spirit::qi::phrase_parse(Iterator&, Iterator, const Expr&, const Skipper&, Attr&) [with Iterator = __gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, Expr = InputGrammar<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode>(), Skipper = MockExpressionNode, Attr = const boost::spirit::ascii::space_type]’ tests_main.cpp:206: instantiated from here /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/skip_over.hpp:27: error: ‘const struct MockExpressionNode’ has no member named ‘parse’ make[2]: *** [build/linux_amd64_devel/GNU-Linux-x86/tests_main.o] Error 1 make[2]: se sale del directorio `/home/mineq/NetBeansProjects/InputParserTests' make[1]: *** [.build-conf] Error 2 make[1]: se sale del directorio `/home/mineq/NetBeansProjects/InputParserTests' make: *** [.build-impl] Error 2 BUILD FAILED (exit value 2, total time: 1m 48s)

    Read the article

  • Android: OutofMemoryError: bitmap size exceeds VM budget with no reason I can see.

    - by Meymann
    Hi. I am having an OutOfMemory exception with a gallery over 600x800 pixels JPEG's. The environment I've been using Gallery with JPG images around 600x800 pixels. Since my content may be a bit more complex than just images, I have set each view to be a RelativeLayout that wraps ImageView with the JPG. In order to "speed up" the user experience I have a simple cache of 4 slots that prefetches (in a looper) about 1 image left and 1 image right to the displayed image and keeps them in a 4 slot HashMap. The platform I am using AVD of 256 RAM and 128 Heap Size, with a 600x800 screen. It also happens on an Entourage Edge target, except that with the device it's harder to debug. The problem I have been getting an exception: OutofMemoryError: bitmap size exceeds VM budget And it happens when fetching the fifth image. I have tried to change the size of my image cache, and it is still the same. The strange thing: There should not be a memory problem In order to make sure the heap limit is very far away from what I need, I have defined a dummy 8MB array in the beginning, and left it unreferenced so it's immediately dispatched. It is a member of the activity thread and is defined as following static { @SuppressWarnings("unused") byte dummy[] = new byte[ 8*1024*1024 ]; } The result is that the heap size is nearly 11MB and it's all free. Note I have added that trick after it began to crash. It makes OutOfMemory less frequent. Now, I am using DDMS. Just before the crash (does not change much after the crash), DDMS shows: ID Heap Size Allocated Free %Used #Objects 1 11.195 MB 2.428 MB 8.767 MB 21.69% 47,156 And in the detail table it shows: Type Count Total Size Smallest Largest Median Average free 1,536 8.739MB 16B 7.750MB 24B 5.825KB The largest block is 7.7MB. And yet the LogCat says: ERROR/dalvikvm-heap(1923): 925200-byte external allocation too large for this process. If you mind the relation of the median and the average, it is plausible to assume that most of the available blocks are very small. However, there is a block large enough for the bitmap, it's 7.7M. How come it is still not enough? Note: I recorded a heap trace. When looking at the amount of data allocated, it does not feel like more than 2M is allocated. It does match the free memory report by DDMS. Could it be that I experience some problem like heap-fragmentation? How do I solve/workaround the problem? Is the heap shared to all threads? Could it be that I interpret the DDMS readout in a wrong way, and there is really no 900K block to allocate? If so, can anybody please tell me where I can see that? Thanks a lot Meymann

    Read the article

< Previous Page | 459 460 461 462 463 464 465 466 467 468 469 470  | Next Page >