Search Results

Search found 45843 results on 1834 pages for 'network access'.

Page 463/1834 | < Previous Page | 459 460 461 462 463 464 465 466 467 468 469 470  | Next Page >

• Dual LAN Printing

  - by Christopher

  I want to use Ubuntu 10.10 Server in a classroom, a computer lab whose bandwidth is provided by a local cable ISP. That's no problem, though the school network has an IP printer that I want to use. I cannot reach the printer through the cable Internet. But, I have two network cards. How is it possible to use both networks at once? eth0 (static 192.168.1.254) is plugged into a four-port router, 192.168.1.1. On the public side of the four-port router is Internet provided by the cable company. I also have the classroom workstations plugged into a switch. The switch is plugged into the four-port router. The whole classroom is wired into the cable Internet. The other NIC, eth1, could it be plugged into an Ethernet jack in the wall? It uses the school network, and I might receive by DHCP an IP address like 10.140.10.100, with the printer on maybe 10.120.50.10. I was thinking about installing the printer on the server so that it could be shared with the workstations. But how does this work? Can I just plug eth1 into the school network and access both LANs? Thanks for any insight, Chris

  Read the article

• Multiple vulnerabilities in Oracle Java Web Console

  - by RitwikGhoshal

  CVE DescriptionCVSSv2 Base ScoreComponentProduct and Resolution CVE-2007-5333 Information Exposure vulnerability 5.0 Apache Tomcat Solaris 10 SPARC: 147673-04 X86: 147674-04 CVE-2007-5342 Permissions, Privileges, and Access Controls vulnerability 6.4 CVE-2007-6286 Request handling vulnerability 4.3 CVE-2008-0002 Information disclosure vulnerability 5.8 CVE-2008-1232 Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability 4.3 CVE-2008-1947 Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability 4.3 CVE-2008-2370 Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability 5.0 CVE-2008-2938 Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability 4.3 CVE-2008-5515 Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability 5.0 CVE-2009-0033 Improper Input Validation vulnerability 5.0 CVE-2009-0580 Information Exposure vulnerability 4.3 CVE-2009-0781 Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability 4.3 CVE-2009-0783 Information Exposure vulnerability 4.6 CVE-2009-2693 Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability 5.8 CVE-2009-2901 Permissions, Privileges, and Access Controls vulnerability 4.3 CVE-2009-2902 Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability 4.3 CVE-2009-3548 Credentials Management vulnerability 7.5 CVE-2010-1157 Information Exposure vulnerability 2.6 CVE-2010-2227 Improper Restriction of Operations within the Bounds of a Memory Buffer vulnerability 6.4 CVE-2010-3718 Directory traversal vulnerability 1.2 CVE-2010-4172 Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability 4.3 CVE-2010-4312 Configuration vulnerability 6.4 CVE-2011-0013 Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability 4.3 CVE-2011-0534 Resource Management Errors vulnerability 5.0 CVE-2011-1184 Permissions, Privileges, and Access Controls vulnerability 5.0 CVE-2011-2204 Information Exposure vulnerability 1.9 CVE-2011-2526 Improper Input Validation vulnerability 4.4 CVE-2011-3190 Permissions, Privileges, and Access Controls vulnerability 7.5 CVE-2011-4858 Resource Management Errors vulnerability 5.0 CVE-2011-5062 Permissions, Privileges, and Access Controls vulnerability 5.0 CVE-2011-5063 Improper Authentication vulnerability 4.3 CVE-2011-5064 Cryptographic Issues vulnerability 4.3 CVE-2012-0022 Numeric Errors vulnerability 5.0 This notification describes vulnerabilities fixed in third-party components that are included in Oracle's product distributions.Information about vulnerabilities affecting Oracle products can be found on Oracle Critical Patch Updates and Security Alerts page.

  Read the article

• Multiple vulnerabilities in Oracle Java Web Console

  - by RitwikGhoshal

  CVE DescriptionCVSSv2 Base ScoreComponentProduct and Resolution CVE-2011-0534 Resource Management Errors vulnerability 5.0 Apache Tomcat Solaris 10 SPARC: 147673-04 X86: 147674-04 CVE-2011-1184 Permissions, Privileges, and Access Controls vulnerability 5.0 CVE-2011-2204 Information Exposure vulnerability 1.9 CVE-2011-2526 Improper Input Validation vulnerability 4.4 CVE-2011-2729 Permissions, Privileges, and Access Controls vulnerability 5.0 CVE-2011-3190 Permissions, Privileges, and Access Controls vulnerability 7.5 CVE-2011-3375 Information Exposure vulnerability 5.0 CVE-2011-4858 Resource Management Errors vulnerability 5.0 CVE-2011-5062 Permissions, Privileges, and Access Controls vulnerability 5.0 CVE-2011-5063 Improper Authentication vulnerability 4.3 CVE-2011-5064 Cryptographic Issues vulnerability 4.3 CVE-2012-0022 Numeric Errors vulnerability 5.0 This notification describes vulnerabilities fixed in third-party components that are included in Oracle's product distributions.Information about vulnerabilities affecting Oracle products can be found on Oracle Critical Patch Updates and Security Alerts page.

  Read the article

• Trouble with wireless driver on a Dell Latitude D830

  - by Kevin

  After uninstalling Dell's wireless utility I get a new hardware found dialog that can not find any driver for my wifi card on it's own. I'm running Windows XP Professional Service Pack 3, and I would like to use the default wifi handler since dell's utility does not work with my company's wireless switch. I did try downloading the recommend driver from the dell support site Network Adapter 2 Model Intel(R) PRO/Wireless 3945ABG Network Connection Description [12] Intel(R) PRO/Wireless 3945ABG Network Connection Status Connected

  Read the article

• Change the order of DNS lookup when connected in the VPN

  - by qwerty2010

  Hi, Using Windows 7 Pro here. I have my LAN network adapter with DNS server 8.8.8.8 (Google's DNS). I also have OpenVPN client to connect to my company's network. If I type "nslookup" while disconnected from the VPN, I get 8.8.8.8 (from my LAN network adapter). If I type "nslookup" while connected in the VPN, I get the DNS IP from my company's network. That makes me think that when connected to the VPN all DNS's resolution are routed first to my company's DNS. How can I change this order, and make the DNS resolution be routed to 8.8.8.8 first, when I'm connected to the VPN? Thank you

  Read the article

• What is a good, inexpensive, non-host-based printer

  - by Josh Yeager

  I am sick of buying cheap host-based printers that have bloated drivers, randomly fail to print, and won't work over a network. Is it possible to get a good color network printer for under $200 that doesn't have those problems? I don't care if it's laser or inkjet; I don't print enough for the ink cost to matter. I just want something that I can plug into my network, set up sharing on my PCs, and forget about.

  Read the article

• New Oracle.com global navigation

  - by tim.bonnemann

  This is a guest post by Michal Kopec, Senior User Experience Architect her at Oracle Marketing Brand and Creative. We have just refreshed the Oracle.com global navigation to serve you better with Oracle related information and news. Highlights 1. Updated, user-oriented and business information balanced navigational categories. Say hello to the new categories: Downloads, Education and Oracle Technology Network. Oracle Partner Network navigation received a facelift too. 2. Brand new flyout based navigation - mouse over Partners for instance - providing both a high level content overview as well as shortcut links for most popular website destinations 3. Introducing audience based - I'm a... - and - I want to... - task-based navigation. Now you can navigate based on who you are or what is you want to accomplish. Please note this is an initial step - we want to build out those based on your opinions and feedback. 4. Adjusted Oracle Technology Network horizontal navigation to match Oracle.com. Oracle Technology Network users can now benefit from OTN content being accessible from anywhere during their Oracle.com and OTN visits of course :) 5. Last but not least - we applied the same refreshed global navigation to a couple of country sites - starting with Oracle Brazil and Oracle China. More to come. The project internal code name is Mosaic. It is an effort to provide you with unified user and brand experience during your Oracle websites visit. Every time you hear Mosaic expect great things to happen. With that - please let us know what you think. We value your opinion.

  Read the article

• Creating virtual switch in VMware

  - by MJI

  We are trying to add a network using vsphere client for VMkernel port while creating a virtual switch. But it prompts us a red cross between the physical adapter and VMkernel port. We did test all the network cables and the network adapters. We tried creating virtual switch for service console but no gains.

  Read the article

• Fiber optic internet, final connection to lan

  - by RayQuang

  Hi, We have fiber optic internet coming to our office soon, and i would like to know if it would be worth installing fiber NIC's in our servers and machines instead of using cat6 gigabit. Here is the layout: (fiber) cable from distribution point in basement - fiber optic modem - Network gateway (debian lenny) - network computers and servers I was wondering if it would be worth installing a fiber connection from the modem to the gateway and the network clients. Will the costs be worth it in terms of speed, latency and stability? Thanks, RayQuang

  Read the article

• DAO/Webservice Consumption in Web Application

  - by Gavin

  I am currently working on converting a "legacy" web-based (Coldfusion) application from single data source (MSSQL database) to multi-tier OOP. In my current system there is a read/write database with all the usual stuff and additional "read-only" databases that are exported daily/hourly from an Enterprise Resource Planning (ERP) system by SSIS jobs with business product/item and manufacturing/SCM planning data. The reason I have the opportunity and need to convert to multi-tier OOP is a newer more modern ERP system is being implemented business wide that will be a complete replacement. This newer ERP system offers several interfaces for third party applications like mine, from direct SQL access to either a dotNet web-service or a SOAP-like web-service. I have found several suitable frameworks I would be happy to use (Coldspring, FW/1) but I am not sure what design patterns apply to my data access object/component and how to manage the connection/session tokens, with this background, my question has the following three parts: Firstly I have concerns with moving from the relative safety of a SSIS job that protects me from downtime and speed of the ERP system to directly connecting with one of the web services which I note seem significantly slower than I expected (simple/small requests often take up to a whole second). Are there any design patterns I can investigate/use to cache/protect my data tier? It is my understanding data access objects (the component that connects directly with the web services and convert them into the data types I can then work with in my Domain Objects) should be singletons (and will act as an Adapter/Facade), am I correct? As part of the data access object I have to setup a connection by username/password (I could set up multiple users and/or connect multiple times with this) which responds with a session token that needs to be provided on every subsequent request. Do I do this once and share it across the whole application, do I setup a new "connection" for every user of my application and keep the token in their session scope (might quickly hit licensing limits), do I set the "connection" up per page request, or is there a design pattern I am missing that can manage multiple "connections" where a requests/access uses the first free "connection"? It is worth noting if the ERP system dies I will need to reset/invalidate all the connections and start from scratch, and depending on which web-service I use might need manually close the "connection/session"

  Read the article

• How do I get a Broadcom BCM4311 working?

  - by Fer1805

  I'm having serious problems installing the broadcom drivers for ubuntu 11.04. It worked perfectly on my previous version, but now, it is impossible. I'm a user with no advance knowledge in linux, so I would need clear explanations on make, compile, etc. I was following the instructions on the following blog, with no luck. Broadcom BCM4311 Wireless not working Can someone help me? Edit: For the command: "lspci | grep Network", I get the following message: 06:00.0 Network controller: Broadcom Corporation BCM4311 802.11b/g WLAN (rev 01) For the command: iwconfig, i get the following: lo no wireless extensions. eth0 no wireless extensions. When i follow the following steps (from the above link), there are a NO error message at all: open the 'Synaptic Package Manager' and search for bcm uninstall the bcm-kernel-source package make sure that the firmware-b43-installer and the b43-fwcutter packages are installed type into terminal: cat /etc/modprobe.d/* | egrep '8180|acx|at76|ath|b43|bcm|CX|eth|ipw|irmware|isl|lbtf|orinoco|ndiswrapper|NPE|p54|prism|rtl|rt2|rt3|rt6|rt7|witch|wl' (you may want to copy this) and see if the term blacklist bcm43xx is there if it is, type cd /etc/modprobe.d/ and then sudo gedit blacklist.conf put a # in front of the line: blacklist bcm43xx then save the file (I was getting error messages in the terminal about not being able to save, but it actually did save properly). reboot 'End of procedure' Before (not ubuntu 11.04), if i wanted to connect wireles, i just went to the icon at the upper side of the screen, click, showed ALL the wireless network available, and done. Now, the only options i see are: Wired Network Auto Eth0 Disconnect VPN Enable networking Connection information Edit connection. hope above info is enough for your help.

  Read the article

• OEG11gR2 integration with OES11gR2 Authorization with condition

  - by pgoutin

  Introduction This OES use-case has been defined originally by Subbu Devulapalli (http://accessmanagement.wordpress.com/).  Based on this OES museum use-case, I have developed the OEG11gR2 policy able to deal with the OES authorization with condition. From an OEG point of view, the way to deal with OES condition is to provide with the OES request some Environmental / Context Attributes.   Museum Use-Case  All painting in the museum have security sensors, an alarm goes off when a person comes too close a painting. The employee designated for maintenance needs to use their ID and disable the alarm before maintenance. You are the Security Administrator for the museum and you have been tasked with creating authorization policies to manage authorization for different paintings. Your first task is to understand how paintings are organized. Asking around, you are surprised to see that there isno formal process in place, so you need to start from scratch. the museum tracks the following attributes for each painting 1. Name of the work 2. Painter 3. Condition (good/poor) 4. Cost You compile the list of paintings  Name of Painting  Painter  Paint Condition  Cost  Mona Lisa  Leonardo da Vinci  Good  100  Magi  Leonardo da Vinci  Poor  40  Starry Night  Vincent Van Gogh  Poor  75  Still Life  Vincent Van Gogh  Good  25 Being a software geek who doesn’t (yet) understand art, you feel that price(or insurance price) of a painting is the most important criteria. So you feel that based on years-of-experience employees can be tasked with maintaining different paintings. You decide that paintings worth over 50 cost should be only handled by employees with over 20 years of experience and employees with less than 10 years of experience should not handle any painting. Lets us start with policy modeling. All paintings have a common set of attributes and actions, so it will be good to have them under a single Resource Type. Based on this resource type we will create the actual resources. So our high level model is: 1) Resource Type: Painting which has action manage and the following four attributes a) Name of the work b) Painter c) Condition (good/poor) d) Cost 2) To keep things simple lets use painting name for Resource name (in real world you will try to use some identifier which is unique, because in future we may end up with more than one painting which has the same name.) 3) Create Resources based on the previous table 4) Create an identity attribute Experience (Integer) 5) Create the following authorization policies a) Allow employees with over 20 years experience to access all paintings b) Allow employees with 10 – 20 years of experience to access painting which cost less than 50 c) Deny access to all paintings for employees with less than 10 year of experience OES Authorization Configuration We do need to create 2 authorization policies with specific conditions a) Allow employees with over 20 years experience to access all paintings b) Allow employees with 10 – 20 years of experience to access painting which cost less than 50 c) Deny access to all paintings for employees with less than 10 year of experience We don’t need an explicit policy for Deny access to all paintings for employees with less than 10 year of experience, because Oracle Entitlements Server will automatically deny if there is no matching policy. OEG Policy The OEG policy looks like the following The 11g Authorization filter configuration is similar to :  The ${PAINTING_NAME} and ${USER_EXPERIENCE} variables are initialized by the "Retrieve from the HTTP header" filters for testing purpose. That's to say, under Service Explorer, we need to provide 2 attributes "Experience" & "Painting" following the OES 11g Authorization filter described above.

  Read the article

• GRE Tunnel over IPsec with Loopback

  - by Alek

  Hello, I'm having a really hard time trying to estabilish a VPN connection using a GRE over IPsec tunnel. The problem is that it involves some sort of "loopback" connection which I don't understand -- let alone be able to configure --, and the only help I could find is related to configuring Cisco routers. My network is composed of a router and a single host running Debian Linux. My task is to create a GRE tunnel over an IPsec infrastructure, which is particularly intended to route multicast traffic between my network, which I am allowed to configure, and a remote network, for which I only bear a form containing some setup information (IP addresses and phase information for IPsec). For now it suffices to estabilish a communication between this single host and the remote network, but in the future it will be desirable for the traffic to be routed to other machines on my network. As I said this GRE tunnel involves a "loopback" connection which I have no idea of how to configure. From my previous understanding, a loopback connection is simply a local pseudo-device used mostly for testing purposes, but in this context it might be something more specific that I do not have the knowledge of. I have managed to properly estabilish the IPsec communication using racoon and ipsec-tools, and I believe I'm familiar with the creation of tunnels and addition of addresses to interfaces using ip, so the focus is on the GRE step. The worst part is that the remote peers do not respond to ping requests and the debugging of the general setup is very difficult due to the encrypted nature of the traffic. There are two pairs of IP addresses involved: one pair for the GRE tunnel peer-to-peer connection and one pair for the "loopback" part. There is also an IP range involved, which is supposed to be the final IP addresses for the hosts inside the VPN. My question is: how (or if) can this setup be done? Do I need some special software or another daemon, or does the Linux kernel handle every aspect of the GRE/IPsec tunneling? Please inform me if any extra information could be useful. Any help is greatly appreciated.

  Read the article

• how to escape the ' in ssh?

  - by Dean Hiller

  I need to escape the ' in this command for ssh exec grep IPADDR /etc/sysconfig/network-scripts/ifcfg-eth0 |awk -F= '{print $2}' How do I escape that? I currentl y have this which does not work ssh host 'grep IPADDR /etc/sysconfig/network-scripts/ifcfg-eth0 |awk -F= '{print $2}'' nor does this ssh host 'grep IPADDR /etc/sysconfig/network-scripts/ifcfg-eth0 |awk -F= \'{print $2}\'' thanks, Dean

  Read the article

• Hostname problems in CentOS 5.5

  - by spoon16

  I just set up a CentOS 5.5 machine on my local network and attempted to modify the hostname by editing /etc/sysconfig/network file. When I'm logged in locally the change to the hostname is reflected and seems to be working fine. When I open a SSH session via PuTTY from Windows this is what I see at the prompt: [root@? ~]# cat /etc/sysconfig/network NETWORKING=yes NETWORKING_IPV6=yes HOSTNAME=mini.local [root@? ~]# sysctl kernel.hostname kernel.hostname = ? [root@? ~]# hostname ? [root@? ~]# hostname -f hostname: Unknown server error A couple of other symptoms that may be helpful in troubleshooting this problem. I can ping the CentOS box from my Windows machine via IP but not hostname. Also, my Netgear router does not display the hostname when I view the "Connected Devices", I do see the mac address and the proper IP listed though. How can I make it so that the hostname is properly propagated throughout my network?

  Read the article

• Ubuntu btrfs: how to remove rootflags=subvol=@ from grub.cfg

  - by mnpria

  When i mount "btrfs" as a root filesytem, the mount info is as below: root@ubuntu1304Btrfs:~# mount /dev/mapper/ubuntu1304Btrfs--vg-root on / type btrfs (rw,subvol=@) Is there a way to have a mount info without the "subvol" information ? I have tried executing what was mentioned here. I also updated the grub.cfg. Still rootflags=subvol=@ is not removed. Is there a way to remove this subvol information ? root@ubuntu1304Btrfs:/home# mount /dev/mapper/ubuntu1304Btrfs--vg-root on / type btrfs (rw,subvol=@) /dev/mapper/ubuntu1304Btrfs--vg-root on /home type btrfs (rw,subvol=@home) root@ubuntu1304Btrfs:/# stat / File: ‘/’ Size: 262 Blocks: 0 IO Block: 4096 directory Device: 12h/18d Inode: 256 Links: 1 Access: (0755/drwxr-xr-x) Uid: ( 0/ root) Gid: ( 0/ root) Access: 2013-11-11 19:56:04.548121873 +0530 Modify: 2013-11-11 19:55:18.008120103 +0530 Change: 2013-11-11 19:55:18.008120103 +0530 Birth: - root@ubuntu1304Btrfs:/# stat /home/ File: ‘/home/’ Size: 230 Blocks: 0 IO Block: 4096 directory Device: 19h/25d Inode: 256 Links: 1 Access: (0755/drwxr-xr-x) Uid: ( 0/ root) Gid: ( 0/ root) Access: 2013-11-12 12:24:52.346377976 +0530 Modify: 2013-11-12 12:24:50.338377900 +0530 Change: 2013-11-12 12:24:50.338377900 +0530 Birth: -

  Read the article

• "Request not supported" in IPCONFIG (WinXP SP3)

  - by pablog

  In a customer PC (Windows XP SP3), suddenly the network went down: the network adapter appears with an error mark. I replaced the network card, but the new one does the same thing. When I enter IPCONFIG, XP shows this error (in standard and safe mode): Internal error occurred Request not supported Unable to query host name If I start the system with a boot cd the PC runs fine, so the problem seems to be in the XP installation. I tried: uninstalling and reinstalling the network card in the Device Manager disabling and reenabling the card netsh int ip reset netsh winsock reset catalog and a couple of "reset" programs (WinsockxpFix.exe, etc) with no luck. Is there any way to fix it without reinstalling XP? TIA, Pablo

  Read the article

• Ubuntu Server 12.04 as a router. Problem with DNS

  - by Lorenzo

  I have a virtualbox lab made up of 4 Windows 2008 R2 servers (DC/DNS,SQL,SHAREPOINT, EXCHANGE) that are configured with static ip addresses with NIC's attached to Internal network. Everything works. I had the requirement to execute some tests that also access external services available on the internet. To keep things clean and similar to the production environment I have installed another VM, with Ubuntu Server 12.04 64 bit and configured (I hope) to work as a router like described on this post. This VM has two network interfaces: first is Bridged with the host and is used as a WAN connection and the other one attached in the Internal Network with its own static IP address on the internal network subnet. But actually the Windows servers does not connect to the internet while the unix one connects. I did a route command. this is the result: Kernel IP Routing table Destination Gateway Genmask Flags Metric Ref Use Iface default 10.69.121.1 0.0.0.0 UG 100 0 0 eth0 10.69.121.0 * 255.255.255.0 U 0 0 0 eth0 192.168.83.0 * 255.255.255.0 U 0 0 0 eth1 Can somebody help me with this configuration? :) Thanks! Addendum: I forgot to mention that one of the windows server hosts a DNS service for which I should maybe configure a forwarding server but I do not exactly know which server to forward on... :(

  Read the article

• CentOS connect to the internet

  - by Delirium tremens

  I installed CentOS, but it didn't automatically connect to the internet. Is that the normal behavior? I have Ethernet Broadband Router DI-604 and WebStar DPX2203 series Cablemodem with EMTA . What should I do to connect to the internet? Update: A cousin told me my ethernet adapter or network board will depend on my motherboard. My computer upgrade document says the motherboard is gigabyte video onboard. I heard gigabyte's network adapters are Gigabit or Realtek. In CentOS, System - Administration - Network - New - Ethernet, first, only "Other Network Board" was listed, so I selected it and clicked Next, then there wasn't Gigabit, but there was Realtek, so I selected Realtek. I heard with Net Virtua selecting dhcp the things first answered asked me to tell first answerer are automatically configured. So I tried Realtek with dhcp, but it still didn't work.

  Read the article

• What's the best solution for file sharing in my case? DAS or NAS?

  - by jakub

  I want to have in my network small, cheap and energy efficient server with will be fully customizable (Gnu/Linux, OpenBSD). What is more I want to have big, redundant storage in my network and access to it via server. I have already small terminal without hard drive (no SATA/PATA, one drive on USB) which works fine. I don't want to buy big server, or to use regular computer for that. It's not cheap. I thought about a small case (ITX?), and cheap computer in this with SATA ports, but I cannot find anything interesting :( I thought about NAS in network and server independently and booting server from NAS, I'm not sure which technologies will be good for that, and I don't know what with performance. Direct connection to NAS through network from workstation is next pro for that. What do you think about DAS? It will be good for that?

  Read the article

• An Interview with Amazon Web Services

  A short interview with Sundar Raghavan of Amazon Web Services about SQL Server and their support and offerings of cloud data services. NEW! Deployment Manager Early Access ReleaseDeploy SQL Server changes and .NET applications fast, frequently, and without fuss, using Deployment Manager, the new tool from Red Gate. Try the Early Access Release to get a 20% discount on Version 1. Download the Early Access Release.

  Read the article

• XDMCP works for Solaris, not for RHEL

  - by joshxdr

  I have some old RHEL4 servers that until recently I was able to connect to remotely with Exceed (remote desktop using XDMCP) from my windowsXP PC. My PC is connected to our network by wired LAN. Recently it seems something has changed in our network. I can still connect to all the old Solaris and HPUX servers with Exceed, but for some reason I can no longer connect to the RHEL4 servers. I assume this is some kind of "security" feature turned on in our network. Does anyone know what this might be, and how I can tell IT to re-enable it? Update: A colleague has found that he can connect (very slowly) to these RHEL4 boxes with XDMCP if he is using our VPN from home, but when he is in the office using wired LAN he cannot connect to them. So it seems that there is some kind of firewall or ???, part of our wired LAN network, that is blocking XDMCP traffic from RHEL4.

  Read the article

• IIS 7.0 informational HTTP status codes

  - by Samir R. Bhogayta

  1xx - Informational These HTTP status codes indicate a provisional response. The client computer receives one or more 1xx responses before the client computer receives a regular response. IIS 7.0 uses the following informational HTTP status codes: 100 - Continue. 101 - Switching protocols. 2xx - Success These HTTP status codes indicate that the server successfully accepted the request. IIS 7.0 uses the following success HTTP status codes: 200 - OK. The client request has succeeded. 201 - Created. 202 - Accepted. 203 - Nonauthoritative information. 204 - No content. 205 - Reset content. 206 - Partial content. 3xx - Redirection These HTTP status codes indicate that the client browser must take more action to fulfill the request. For example, the client browser may have to request a different page on the server. Or, the client browser may have to repeat the request by using a proxy server. IIS 7.0 uses the following redirection HTTP status codes: 301 - Moved permanently. 302 - Object moved. 304 - Not modified. 307 - Temporary redirect. 4xx - Client error These HTTP status codes indicate that an error occurred and that the client browser appears to be at fault. For example, the client browser may have requested a page that does not exist. Or, the client browser may not have provided valid authentication information. IIS 7.0 uses the following client error HTTP status codes: 400 - Bad request. The request could not be understood by the server due to malformed syntax. The client should not repeat the request without modifications. IIS 7.0 defines the following HTTP status codes that indicate a more specific cause of a 400 error: 400.1 - Invalid Destination Header. 400.2 - Invalid Depth Header. 400.3 - Invalid If Header. 400.4 - Invalid Overwrite Header. 400.5 - Invalid Translate Header. 400.6 - Invalid Request Body. 400.7 - Invalid Content Length. 400.8 - Invalid Timeout. 400.9 - Invalid Lock Token. 401 - Access denied. IIS 7.0 defines several HTTP status codes that indicate a more specific cause of a 401 error. The following specific HTTP status codes are displayed in the client browser but are not displayed in the IIS log: 401.1 - Logon failed. 401.2 - Logon failed due to server configuration. 401.3 - Unauthorized due to ACL on resource. 401.4 - Authorization failed by filter. 401.5 - Authorization failed by ISAPI/CGI application. 403 - Forbidden. IIS 7.0 defines the following HTTP status codes that indicate a more specific cause of a 403 error: 403.1 - Execute access forbidden. 403.2 - Read access forbidden. 403.3 - Write access forbidden. 403.4 - SSL required. 403.5 - SSL 128 required. 403.6 - IP address rejected. 403.7 - Client certificate required. 403.8 - Site access denied. 403.9 - Forbidden: Too many clients are trying to connect to the Web server. 403.10 - Forbidden: Web server is configured to deny Execute access. 403.11 - Forbidden: Password has been changed. 403.12 - Mapper denied access. 403.13 - Client certificate revoked. 403.14 - Directory listing denied. 403.15 - Forbidden: Client access licenses have exceeded limits on the Web server. 403.16 - Client certificate is untrusted or invalid. 403.17 - Client certificate has expired or is not yet valid. 403.18 - Cannot execute requested URL in the current application pool. 403.19 - Cannot execute CGI applications for the client in this application pool. 403.20 - Forbidden: Passport logon failed. 403.21 - Forbidden: Source access denied. 403.22 - Forbidden: Infinite depth is denied. 404 - Not found. IIS 7.0 defines the following HTTP status codes that indicate a more specific cause of a 404 error: 404.0 - Not found. 404.1 - Site Not Found. 404.2 - ISAPI or CGI restriction. 404.3 - MIME type restriction. 404.4 - No handler configured. 404.5 - Denied by request filtering configuration. 404.6 - Verb denied. 404.7 - File extension denied. 404.8 - Hidden namespace. 404.9 - File attribute hidden. 404.10 - Request header too long. 404.11 - Request contains double escape sequence. 404.12 - Request contains high-bit characters. 404.13 - Content length too large. 404.14 - Request URL too long. 404.15 - Query string too long. 404.16 - DAV request sent to the static file handler. 404.17 - Dynamic content mapped to the static file handler via a wildcard MIME mapping. 404.18 - Querystring sequence denied. 404.19 - Denied by filtering rule. 405 - Method Not Allowed. 406 - Client browser does not accept the MIME type of the requested page. 408 - Request timed out. 412 - Precondition failed. 5xx - Server error These HTTP status codes indicate that the server cannot complete the request because the server encounters an error. IIS 7.0 uses the following server error HTTP status codes: 500 - Internal server error. IIS 7.0 defines the following HTTP status codes that indicate a more specific cause of a 500 error: 500.0 - Module or ISAPI error occurred. 500.11 - Application is shutting down on the Web server. 500.12 - Application is busy restarting on the Web server. 500.13 - Web server is too busy. 500.15 - Direct requests for Global.asax are not allowed. 500.19 - Configuration data is invalid. 500.21 - Module not recognized. 500.22 - An ASP.NET httpModules configuration does not apply in Managed Pipeline mode. 500.23 - An ASP.NET httpHandlers configuration does not apply in Managed Pipeline mode. 500.24 - An ASP.NET impersonation configuration does not apply in Managed Pipeline mode. 500.50 - A rewrite error occurred during RQ_BEGIN_REQUEST notification handling. A configuration or inbound rule execution error occurred. Note Here is where the distributed rules configuration is read for both inbound and outbound rules. 500.51 - A rewrite error occurred during GL_PRE_BEGIN_REQUEST notification handling. A global configuration or global rule execution error occurred. Note Here is where the global rules configuration is read. 500.52 - A rewrite error occurred during RQ_SEND_RESPONSE notification handling. An outbound rule execution occurred. 500.53 - A rewrite error occurred during RQ_RELEASE_REQUEST_STATE notification handling. An outbound rule execution error occurred. The rule is configured to be executed before the output user cache gets updated. 500.100 - Internal ASP error. 501 - Header values specify a configuration that is not implemented. 502 - Web server received an invalid response while acting as a gateway or proxy. IIS 7.0 defines the following HTTP status codes that indicate a more specific cause of a 502 error: 502.1 - CGI application timeout. 502.2 - Bad gateway. 503 - Service unavailable. IIS 7.0 defines the following HTTP status codes that indicate a more specific cause of a 503 error: 503.0 - Application pool unavailable. 503.2 - Concurrent request limit exceeded.

  Read the article

• Wireless disconnects at random after upgrade to Ubuntu 10.4

  - by Daniel Elessedil Kjeserud

  After upgrading my home server from Ubuntu 8.10 to 10.4 my wireless seemingly drops out, even though my IRC client keeps it's connection to the servers, so it looks like the machine just stops taking wireless requests. A ping will give a me this Request timeout for icmp_seq 27 ping: sendto: Host is down After a while the machine just starts responding again, without any interaction from me. When the machine comes back, this is what dmesg gives me [ 18.296288] wlan0: direct probe to AP 00:1b:63:22:a4:5f (try 1) [ 18.296350] wlan0: deauthenticating from 00:1b:63:22:a4:5f by local choice (reason=3) [ 18.296440] wlan0: direct probe to AP 00:1b:63:22:a4:5f (try 1) [ 18.298697] wlan0: direct probe responded [ 18.298706] wlan0: authenticate with AP 00:1b:63:22:a4:5f (try 1) [ 18.306836] wlan0: authenticated [ 18.306886] wlan0: associate with AP 00:1b:63:22:a4:5f (try 1) [ 18.309396] wlan0: RX AssocResp from 00:1b:63:22:a4:5f (capab=0x411 status=0 aid=2) [ 18.309402] wlan0: associated [ 18.310187] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 18.447742] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) [ 18.447748] apm: overridden by ACPI. [ 19.163282] padlock: VIA PadLock not detected. [ 28.352022] wlan0: no IPv6 routers present kjes@brin:~$ lspci 02:07.0 Network controller: RaLink RT2561/RT61 rev B 802.11g It's on a wireless network with WPA2, the machine worked without any problems on the same wireless network since Ubuntu 8.10 was the most resent version, and there have been no changes to my network recently. Even though the server drops out, everything else on the network keeps working like normal.

  Read the article

• Can I bridge two wired networks with a Netgear WG602 (v4)

  - by Mr. Flibble

  I have two networks and I want to join them. Only one has a router. The other is currently just a bunch of computers joined via a switch. So it looks a little like this: 1. Router + comp1 + comp2 + wireless ap 2. comp3 + comp4 + Netgear WG602 Is it possible to use the WG602 to connect to the WIFI of the main network (the one with the router) and connect via wire to the 2nd network - therefore allowing the computers on network 2 to use the router on network 1?

  Read the article

< Previous Page | 459 460 461 462 463 464 465 466 467 468 469 470  | Next Page >