Search Results

Search found 39577 results on 1584 pages for 'temp files'.

Page 463/1584 | < Previous Page | 459 460 461 462 463 464 465 466 467 468 469 470  | Next Page >

  • No access to Samba shares

    - by koanhead
    I have three shared folders in my local home directory- that is to say, on my Ubuntu desktop's /home/me/. All were set up using "Sharing Options" in Nautilus' right-click menu. The standard "Music" and "Videos" folders are configured identically: the "Guest Access" box is checked, but the "Allow others to create and delete" is not. The third folder, called "shared", is configured to not allow Guest access but to allow others to modify files. I have not altered /etc/samba/smb.conf by hand, I have only used Sharing Options to create and modify these so-called "shares". My roommates have two Windows 7 computers and one Ubuntu Netbook Remix netbook. I have the aforementioned desktop machine and laptop running 10.04. None of these machines can access any of the shares. Attempts to access the Guest shares result in the message \\machine\directory is not accessible. The network name could not be found. This is the error message generated by a VM running Windows 2000. The other Windows machines generate a similar error. The Ubuntu laptop gives the error Unable to mount location: Failed to mount Windows share. Hurrah, once again, for informative error messages. That really helps a lot. When attempting to browse the folder called "shared" from the laptop, I'm confronted with a password dialog. This behavior is the same will all machines I've tried in the situation. On entering my username and password for the account to which the shares belong, the password dialog briefly disappears and is replaced with an identical dialog. No error message, useful or not, appears. When attempting to browse this folder with the VM, the outcome is the same except that the password dialog helpfully states "incorrect username or password". My assumption is that the username and password in question is that of the user which owns the shares. I have tried all other username and password combinations available in this context and the outcome is the same. I would like to be able to share files. Sharing them with Windows machines is a nice feature, or would be if it was available. Really I consider sharing files between two machines with the same version of the same operating system kind of a minimum condition for network usability. Samba last functioned reliably for me more than ten years ago. I have attempted to use it on and off since then with only intermittent success. Oh, and "Personal File Sharing" from the Preferences menu does not result in an entry in Places → Network → my-server. In fact, the old entry "MY-SERVER" goes away and is replaced by "koanhead's public files on my-server", which when I attempt to open it from the laptop gives a "DBus.Error.NoReply: Message did not receive a reply." I know I come here and gripe about Ubuntu a lot, but on the other hand I spend literally hours every day trying to fix things in Ubuntu. It's a good system which aspires to greatness, which is why things like this either Need to work; or Be adequately documented. Ideally both would be the case. Anyway, rant over. Hopefully someone will have some insight on this issue. Thanks all who bother to read this wall o'text for your time.

    Read the article

  • How to save a ntfs partition which suddenly became empty

    - by SteveO
    One ntfs partition of my laptop was suddenly wiped out without any notice to me, when I rebooted from Windows 7 to Ubuntu 12.04 today. I am in need of help to save my files on that partition, which are important and unfortunately haven't been backed up yet. My laptop has two operating systems: Windows 7 and Ubuntu 12.04. with a ntfs partition shared between the two operating systems for storing some data files (109GB, about 97%of which has been used). I have almost always been using Ubuntu, but today I happened to have to work under Windows. Following is a record of what happened in the time order, numbering according to which operating system I was in at each stage. When I started into Windows 7, right before being able to log in, it took a while and two reboots to configure the Windows. I thought it was normal, since last time when I was using Windows two weeks ago, it took very long and several reboots to update Windows, since the last time I used Windows before then was in November last year. Then after finally being able to log in Windows 7, I installed Libre Office, MathType (I got it from http://dl.portablesoft.org/down/?id=2515, which I originally thought was a trial version, but later I learned was a cracked version and felt wrong. I made a copy of it at dropbox http://dl.dropbox.com/u/13029929/MathType_6.8_PortableSoft.rar, not for distributing it but to list it there just in case it will help to identify the problem), and MikTex. I then edited some .doc files in the ntfs partition under both Microsoft Office with MathType, and Libre Office. When I finished working under Windows and rebooted into Ubuntu, Ubuntu did some filesystem checking and reported that the ntfs partition was not able to be mounted. Then I rebooted again into Windows, and found that the ntfs partition had been emptied, i.e. all the data files were gone, and only one system file bootsqm.dat and one system directory System Volume Information were there, with their last updated time being the time when I first rebooted from Windows to Ubuntu (in fact, it is 4 hours in advanced than the actual time of that rebooting , see immediately below) Also I noticed that the time shown by Windows is not correct for my time zone (UTC-05:00) Eastern Time (US & Canada)), which is 4 hours in advance than the correct time (my current time is 3am, but the computer shows 7am). Same things happened when I rebooted into Ubuntu again: the ntfs has been emptied and left with only one Windows system file bootsqm.dat and one Windows system directory System Volume Information. the time shown by Ubuntu is 4 hours in advance than the correct time. I wonder what I can do to retrieve my data files back on the ntfs partition? If I am not able to do it myself, will some professionals be able to help me out? Thanks a lot! PS: I didn't think I did any thing that required emptying that partition. But there were quite some works I did during that stage right before the reboot from Windows to Ubuntu when the problem occured. Did I make any mis-operation?

    Read the article

  • No access to Samba shares

    - by koanhead
    I have three shared folders in my local home directory- that is to say, on my Ubuntu desktop's /home/me/. All were set up using "Sharing Options" in Nautilus' right-click menu. The standard "Music" and "Videos" folders are configured identically: the "Guest Access" box is checked, but the "Allow others to create and delete" is not. The third folder, called "shared", is configured to not allow Guest access but to allow others to modify files. I have not altered /etc/samba/smb.conf by hand, I have only used Sharing Options to create and modify these so-called "shares". My roommates have two Windows 7 computers and one Ubuntu Netbook Remix netbook. I have the aforementioned desktop machine and laptop running 10.04. None of these machines can access any of the shares. Attempts to access the Guest shares result in the message \\machine\directory is not accessible. The network name could not be found. This is the error message generated by a VM running Windows 2000. The other Windows machines generate a similar error. The Ubuntu laptop gives the error Unable to mount location: Failed to mount Windows share. Hurrah, once again, for informative error messages. That really helps a lot. When attempting to browse the folder called "shared" from the laptop, I'm confronted with a password dialog. This behavior is the same will all machines I've tried in the situation. On entering my username and password for the account to which the shares belong, the password dialog briefly disappears and is replaced with an identical dialog. No error message, useful or not, appears. When attempting to browse this folder with the VM, the outcome is the same except that the password dialog helpfully states "incorrect username or password". My assumption is that the username and password in question is that of the user which owns the shares. I have tried all other username and password combinations available in this context and the outcome is the same. I would like to be able to share files. Sharing them with Windows machines is a nice feature, or would be if it was available. Really I consider sharing files between two machines with the same version of the same operating system kind of a minimum condition for network usability. Samba last functioned reliably for me more than ten years ago. I have attempted to use it on and off since then with only intermittent success. Oh, and "Personal File Sharing" from the Preferences menu does not result in an entry in Places → Network → my-server. In fact, the old entry "MY-SERVER" goes away and is replaced by "koanhead's public files on my-server", which when I attempt to open it from the laptop gives a "DBus.Error.NoReply: Message did not receive a reply." I know I come here and gripe about Ubuntu a lot, but on the other hand I spend literally hours every day trying to fix things in Ubuntu. It's a good system which aspires to greatness, which is why things like this either Need to work; or Be adequately documented. Ideally both would be the case. Anyway, rant over. Hopefully someone will have some insight on this issue. Thanks all who bother to read this wall o'text for your time.

    Read the article

  • RIA Services EntitySet does not support 'Edit' opperation

    - by Savvas Sopiadis
    Hello everbody! Making my first steps in RIA Services (VS2010Beta2) and i encountered this problem: created an EF Model (no POCOs), generic repository on top of it and a RIA Service(hosted in an ASP.NET MVC application) and tryed to get data from within the ASP.NET MVC application: worked well. Next step: Silverlight client. Got a reference to the RIAService (through its context), queried for all the records of the repository and got them into the SL application as well (using this code sample): private ObservableCollection<Culture> _cultures = new ObservableCollection<Culture>(); public ObservableCollection<Culture> cultures { get { return _cultures; } set { _cultures = value; RaisePropertyChanged("cultures"); } } .... //Get cultures EntityQuery<Culture> queryCultures = from cu in dsCtxt.GetAllCulturesQuery() select cu; loCultures = dsCtxt.Load(queryCultures); loCultures.Completed += new EventHandler(lo_Completed); .... void loAnyCulture_Completed(object sender, EventArgs e) { ObservableCollection<Culture> temp= new ObservableCollection<Culture>loAnyCulture.Entities); AnyCulture = temp[0]; } The problem is this: whenever i try to edit some data of a record (in this example the first record) i get this error: This EntitySet of type 'Culture' does not support the 'Edit' operation. I thought that i did something weird and tryed to create an object of type Culture and assign a value to it: it worked well! What am i missing? Do i have to declare an EntitySet? Do i have to mark it? Do i have to...what? Thanks in advance

    Read the article

  • MSAcpi_ThermalZoneTemperature class not showing actual temperature

    - by jchoudhury
    i want to fetch CPU Performance data in real time including temperature. i used the following code to get CPU Temperature: try { ManagementObjectSearcher searcher = new ManagementObjectSearcher("root\\WMI", "SELECT * FROM MSAcpi_ThermalZoneTemperature"); foreach (ManagementObject queryObj in searcher.Get()) { double temp = Convert.ToDouble(queryObj["CurrentTemperature"].ToString()); double temp_critical = Convert.ToDouble(queryObj["CriticalTripPoint"].ToString()); double temp_cel = (temp/10 - 273.15); double temp_critical_cel = temp_critical / 10 - 273.15; lblCurrentTemp.Text = temp_cel.ToString(); lblCriticalTemp.Text = temp_critical_cel.ToString(); } } catch (ManagementException e) { MessageBox.Show("An error occurred while querying for WMI data: " + e.Message); } but this code shows the temperature that is not the correct temperature. It ususally shows 49.5-50.5 degrees centigrade. But I used "OpenHardwareMonitor" that report CPU temperature over 71 degree centigrade and changing fractions along with time fractions. is there anything I am missing in the code? I used the above code in timer_click event for every 500ms interval to refresh the temperature reading but it's always showing the same temperature from the beginning of execution. That implies if you run this application and if it shows 49 degree then after 1 hour session, it'll constantly show 49 degree. Where is the problem? please help. Thanks in advance.

    Read the article

  • Visual Studio: Add Item / Add as link rather than just Add

    - by Pete d'Oronzio
    I'm new to visual studio, coming from Delphi. I have a directory tree full of .cs files (root is \Common). I also have a directory tree full of Applications (root is \Applications) Finally, I've got a tree full of Assemblies (root is \Assemblies) I'd like to keep my .cs files in the Common tree and all the environment voodoo (solutions, projects, settings, metadata, debug data, bin, etc.) in the Assmblies tree. So, for a simple example, I've got an assembly called PdMagic.Common.Math.dll. The Solution and project is located in \Assemblies\Common\Math. All of its source (.cs) files are in \Common\Math. (matrix.cs, trig.cs, mathtypes.cs, mathfuncs.cs, stats.cs, etc.) When I use Add Existing Item to add matrix.cs to my project, a copy of it is added to the \Assemblies\Common\Math folder. I just want to reference it. I don't want multiple copies laying around. I've tried Add Existing Item, and used the drop down to "Add link" rather than just "Add", and that seems to do what I want. Question: What is the "best practice" for this sort of thing? Do most people just put those .cs files all in the same folder as the project? Why isn't "Add link" the default? Thanks!

    Read the article

  • Localize WiX installer which uses the Firewall extension

    - by tronda
    I've got a WiX installer project which uses MSBuild to generate the MSI file. The WXS file includes the WiX firewall extension: xmlns:fire="http://schemas.microsoft.com/wix/FirewallExtension" I've defined two cultures in the MSBuild file with the following definition: <PropertyGroup> ... <Cultures>en-us;no-no</Cultures> </PropertyGroup> I've also added the translated resources: <ItemGroup> <EmbeddedResource Include="lang\Firewall_no-no.wxl" /> <EmbeddedResource Include="lang\WixUI_no-no.wxl" /> </ItemGroup> These represents translation to Norwegian for the Firewall extension and the WixUI extension. When I run the build it succeeds with the en-us part, but the no-no part fails with the following error messages: C:\delivery\Dev\wix30_public\src\ext\FirewallExtension\wixlib\FirewallExtension.wxs(19): error LGHT0102: The localization variable !(loc.WixSchedFirewallExceptionsInstall) is unknown. Please ensure the variable is defined. .... Couple of issues: I don't know where the C:\delivery directory comes from. I don't have such a directory. The localization variables referenced in the error message have been translated in the Firewall_no-no.wxl file. When I run MSBuild with more detailed information I see the following output right before the error message: Task "Light" Command: C:\Program Files (x86)\Windows Installer XML v3\bin\Light.exe -cultures:no-no -ext "C:\Program Files (x86)\Windows Installer XML v3\bin\WixUIExtension.dll" -ext "C:\Program Files (x86)\Windows I nstaller XML v3\bin\WixUtilExtension.dll" -ext "C:\Program Files (x86)\Windows Installer XML v3\bin\WixFirewallExtension.dll" -loc lang\Firewall_no-no.wxl -loc lang\WixUI_no-no.wxl -out F:\Projects\MyProd\MyProj\Installer\bin\Debug\no-no\MyInstaller.msi -pdbout F:\Projects\MyProd\MyProj\Installer\bin\Debug\no-no\MyInstaller.wixpdb obj\Debug\MyProj.wixobj As the details show, the MSBuild task results in having two -loc parameters to the Light executable. Not sure if that would be the reason for this problem. Any ideas on how to solve this?

    Read the article

  • Managing a file-based public maven repository

    - by Roland Ewald
    I am looking for an easy way to manage a public file-based Maven repository. While we are using the open-source version of Artifactory internally, we now want to put a file-based repository of our published artifacts (and their dependencies) on a separate machine that is publicly available. There are several ways how to do this, but none of them seems ideal: Use Maven Dependency plugin: if it is configured correctly and executed with the goal dependency:copy-dependencies for the release-module of our project, it creates a local repository structure that is fine, but this structure does not contain the meta-data.xml files, nor the hash-sums. Use Artifactory to export repo: AFAIK Artifactory only allows to export a repository as a whole. This would include the non-published modules from our project (which would then need to be deleted manually). Also, all dependencies are sitting in another repository, so this needs to be done twice, and many dependencies are not even required by a published artifact (only by artifacts that are still for internal use only). Nevertheless, this method would also include the meta-data.xml files and the hash-sums for all files. To set up an initial version of the repository, I used a mixture of both methods: I first created the Maven repository for all required dependencies via dependency:copy-dependencies and then wrote a script to cherry-pick the meta-data.xml files (etc.) from Artifactory. This is terribly cumbersome, isn't there a better way to solve this? Maybe there is another Maven 3 - plugin that I am unaware of, or some other command-line tool that does the job? I basically just need a simple way to create a Maven repository that contains all artifacts a given artifact depends on (and no more), and also contains all meta-data expected in a remote repository. Any ideas?

    Read the article

  • How to bulk insert a CSV file into SQLite C#

    - by Lirik
    I have seen similar questions (1, 2), but none of them discuss how to insert CSV files into SQLite. About the only thing I could think of doing is to use a CSVDataAdapter and fill the SQLiteDataSet, then use the SQLiteDataSet to update the tables in the database: The only DataAdapter for CSV files I found is not actually available: CSVDataAdapter CSVda = new CSVDataAdapter(@"c:\MyFile.csv"); CSVda.HasHeaderRow = true; DataSet ds = new DataSet(); // <-- Use an SQLiteDataSet instead CSVda.Fill(ds); To write to a CSV file: CSVDataAdapter CSVda = new CSVDataAdapter(@"c:\MyFile.csv"); bool InclHeader = true; CSVda.Update(MyDataSet,"MyTable",InclHeader); I found the above code @ http://devintelligence.com/2005/02/dataadapter-for-csv-files/ The CSVDataAdapter was supposed to come with OpenNetCF's SDF, but it doesn't seem to be available anymore. Does anybody know where I can get a CSVDataAdapter? Perhaps somebody knows the much simpler thing: how to do bulk inserts of CSV files into SQLite... your help would be greatly appreciated!

    Read the article

  • C# PredicateBuilder Entities: The parameter 'f' was not bound in the specified LINQ to Entities quer

    - by Neothor
    I needed to build a dynamic filter and I wanted to keep using entities. Because of this reason I wanted to use the PredicateBuilder from albahari. I created the following code: var invoerDatums = PredicateBuilder.True<OnderzoeksVragen>(); var inner = PredicateBuilder.False<OnderzoeksVragen>(); foreach (var filter in set.RapportInvoerFilter.ToList()) { if(filter.IsDate) { var date = DateTime.Parse(filter.Waarde); invoerDatums = invoerDatums.Or(o => o.Van >= date && o.Tot <= date); } else { string temp = filter.Waarde; inner = inner.Or(o => o.OnderzoekType == temp); } } invoerDatums = invoerDatums.And(inner); var onderzoeksVragen = entities.OnderzoeksVragen .AsExpandable() .Where(invoerDatums) .ToList(); When I ran the code there was only 1 filter which wasn't a date filter. So only the inner predicate was filled. When the predicate was executed I got the following error. The parameter 'f' was not bound in the specified LINQ to Entities query expression. While searching for an answer I found the following page. But this is already implemented in the LINQKit. Does anyone else experienced this error and know how to solve it?

    Read the article

  • How to bulk insert a CSV file into SQLite

    - by Lirik
    I have seen similar questions (1, 2), but none of them discuss how to insert CSV files into SQLite. About the only thing I could think of doing is to use a CSVDataAdapter and fill the SQLiteDataSet, then use the SQLiteDataSet to update the tables in the database: The only DataAdapter for CSV files I found is not actually available: CSVDataAdapter CSVda = new CSVDataAdapter(@"c:\MyFile.csv"); CSVda.HasHeaderRow = true; DataSet ds = new DataSet(); // <-- Use an SQLiteDataSet instead CSVda.Fill(ds); To write to a CSV file: CSVDataAdapter CSVda = new CSVDataAdapter(@"c:\MyFile.csv"); bool InclHeader = true; CSVda.Update(MyDataSet,"MyTable",InclHeader); I found the above code @ http://devintelligence.com/2005/02/dataadapter-for-csv-files/ The CSVDataAdapter was supposed to come with OpenNetCF's SDF, but it doesn't seem to be available anymore. Does anybody know where I can get a CSVDataAdapter? Perhaps somebody knows the much simpler thing: how to do bulk inserts of CSV files into SQLite... your help would be greatly appreciated!

    Read the article

  • Changing an xcode project Path with lowercase path issue

    - by joneswah
    I have a problem with an Xcode project which has a path of "/users/me/blah" with a lowercase 'u'. When I check my other projects (in the General Tab of the Project Info Window the Path starts with a uppercase "Users". This causes a couple of problems. When I try and add an existing file which is "relative to group" or "Relative to Project" it thinks it needs to change directory all the way to the root. For example the path for any included file ends up as "../../../../Users/me/blah" which then prevents the project working on other peoples machine because the "relative" is essentially an absolute path... sigh. The other side effect is that when you select "Add Existing Files" instead of greying out all of the already included files, it leaves ALL of the files available for selection. Because it thinks files in "Users" are different to "users". I have tried re checking out the project into a different directory but no difference. I am not sure how I ended up with the wrong path in the first instance. No doubt something stupid that I did. Anyone have a clue on how I change the project path or resolve this? thanks

    Read the article

  • Can't install ruby-debug-ide on Windows 7

    - by Jack Allan
    I'm running netbeans 6.8 on windows 7 pro (x64) with the bitnami stack and I'm using ruby 1.8.7-p72. Note: I can't change the version of ruby I am using because I am working with a team, this is a college project and we have only 3 weeks left before we have to hand it in. Changing the version of ruby at this time would be too much work I think. I can't debug my code with the IDE. It says I must have the fast-debugger installed but I cannot install it. When I try through the gui I get the following message: Building native extensions. This could take a while... ERROR: Error installing ruby-debug-ide: ERROR: Failed to build gem native extension. "C:/Program Files/BitNami RubyStack/ruby/bin/ruby.exe" mkrf_conf.rb Building native extensions. This could take a while... Gem files will remain installed in C:/Program Files/BitNami RubyStack/ruby/lib/ruby/gems/1.8/gems/ruby-debug-ide-0.4.8 for inspection. Results logged to C:/Program Files/BitNami RubyStack/ruby/lib/ruby/gems/1.8/gems/ruby-debug-ide-0.4.8/ext/gem_make.out I have tracked the problem down to a gcc not being installed... I have installed cygwin but I'm not sure what I am doing and it's still not working... Anyone know how to fix this problem? (BTW- I have already done a lot of googling on this)

    Read the article

  • properties-maven-plugin: Error loading properties-file

    - by yournamehere
    I want to extract all the properties from my pom.xml into a properties-file. These are the common properties like dependency-versions, plugin-versions and directories. I'm using the properties-maven-plugin, but its not working as i want it to. The essential part of my pom.xml: <plugin> <groupId>org.codehaus.mojo</groupId> <artifactId>properties-maven-plugin</artifactId> <version>1.0-alpha-1</version> <executions> <execution> <phase>initialize</phase> <goals> <goal>read-project-properties</goal> </goals> <configuration> <files> <file>${basedir}/pom.properties</file> </files> </configuration> </execution> </executions> </plugin> Now when i run "mvn properties:read-project-properties" i get the following error: [INFO] One or more required plugin parameters are invalid/missing for 'properties:read-project-properties' [0] Inside the definition for plugin 'properties-maven-plugin' specify the following: <configuration> ... <files>VALUE</files> </configuration>. The pom.properties-file is located in the same dir as the pom.xml. What can i do to let the properties-maven-plugin read my properties-file?

    Read the article

  • MSDeploy migrate only configuration from IIS 6 to 7

    - by Matt
    We have 19 websites, many of which have many "virtual" directories, on a IIS 6 server. I am trying to migrate the whole thing over to IIS 7 on a different server. Following the instructions on http://learn.iis.net/page.aspx/427/migrate-a-web-site-from-iis-60-to-iis-70/ I attempted the following command line execution: msdeploy -verb:sync -source:metakey=lm/w3svc -dest:package=D:\Temp\Sites.zip > D:\temp\WebDeployPackage.log It appeared to be working until I got a "There is not enough space on the disk" error. The D drive, which you'll notice is the target location for the package and the log has plenty of space (all the resources for the websites are about 5gb, the drive has 200+). Though the C drive is of limited size (6Gb), so that might be the problem. Anyway, I figure the best bet was to try and do a migration of settings/configurations only, not the actual resources. We can easily deploy the resources to the new server with our NAnt build scripts, so that's not an issue. Getting all the correct configurations moved over, however, would be challenging to do manually. So, is there a way to export/package only the configuration/options of the IIS 6 server using msdeploy (or any other tool?)

    Read the article

  • Selenium error on Win7

    - by hawkeye
    I'm starting Selenium server with the following on a command line: java -jar selenium-server.jar Here is the code: import com.thoughtworks.selenium.*; import java.util.regex.Pattern; import org.openqa.selenium.server.SeleniumServer; import junit.framework.*; public class orkut extends SeleneseTestCase { public void setUp() throws Exception { //SeleniumServer server = new SeleniumServer(); //server.start(); setUp("https://www.google.com/", "*firefox C:\\Program Files (x86)\\Mozilla Firefox\\firefox.exe"); } public void testOrkut() throws Exception { selenium.setTimeout("10000"); selenium.open("/accounts/ServiceLogin?service=orkut&hl=en-US&rm=false&continue=http%3A%2F%2Fwww.orkut.com%2FRedirLogin%3Fmsg%3D0&cd=IN&skipvpage=true&sendvemail=false"); selenium.type("Email", "username"); selenium.type("Passwd", "password"); selenium.click("signIn"); selenium.selectFrame("orkutFrame"); selenium.click("link=Communities"); selenium.waitForPageToLoad("10000"); } public static Test suite() { return new TestSuite(orkut.class); } public void tearDown(){ selenium.stop(); } public static void main(String args[]) { junit.textui.TestRunner.run(suite()); } } Here is the error: .E Time: 33.386 There was 1 error: 1) testOrkut(orkut)java.lang.RuntimeException: Could not start Selenium session: Failed to start new browser session: Unable to delete file C:\Users\user\AppData\Local\Temp\customProfileDir78cf02e3efca4772a71525c4a7523cac\parent.lock at com.thoughtworks.selenium.DefaultSelenium.start(DefaultSelenium.java:89) at com.thoughtworks.selenium.SeleneseTestBase.setUp(SeleneseTestBase.java:123) at com.thoughtworks.selenium.SeleneseTestBase.setUp(SeleneseTestBase.java:104) at com.thoughtworks.selenium.SeleneseTestCase.setUp(SeleneseTestCase.java:78) at orkut.setUp(orkut.java:14) at com.thoughtworks.selenium.SeleneseTestCase.runBare(SeleneseTestCase.java:212) at orkut.main(orkut.java:37) Caused by: com.thoughtworks.selenium.SeleniumException: Failed to start new browser session: Unable to delete file C:\Users\M022534\AppData\Local\Temp\customProfileDir78cf02e3efca4772a71525c4a7523cac\parent.lock at com.thoughtworks.selenium.HttpCommandProcessor.throwAssertionFailureExceptionOrError(HttpCommandProcessor.java:97) at com.thoughtworks.selenium.HttpCommandProcessor.doCommand(HttpCommandProcessor.java:91) at com.thoughtworks.selenium.HttpCommandProcessor.getString(HttpCommandProcessor.java:262) at com.thoughtworks.selenium.HttpCommandProcessor.start(HttpCommandProcessor.java:223) at com.thoughtworks.selenium.DefaultSelenium.start(DefaultSelenium.java:81) ... 16 more FAILURES!!! Tests run: 1, Failures: 0, Errors: 1

    Read the article

  • how to add item to Spinner's ArrayAdapter?

    - by allen-c
    i had a EditText , a button and a spinner . When click the button , the spinner will add a new item with name you entered in the EditText. But here is the question, my adapter.add() method seems doesn't work...here is my code: public class Spr extends Activity { Button bt1; EditText et; ArrayAdapter<CharSequence> adapter; Spinner spinner; @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.main); bt1 = (Button)this.findViewById(R.id.bt1); et = (EditText)this.findViewById(R.id.et); spinner = (Spinner)this.findViewById(R.id.spr); adapter = ArrayAdapter.createFromResource( this, R.array.planets_array, android.R.layout.simple_spinner_item); adapter.setDropDownViewResource(android.R.layout.simple_spinner_dropdown_item); spinner.setAdapter(adapter); bt1.setOnClickListener(new View.OnClickListener() { @Override public void onClick(View v) { String temp = et.getText().toString(); adapter.add(temp); adapter.notifyDataSetChanged(); spinner.setAdapter(adapter); } }); spinner.setOnItemSelectedListener(new Spinner.OnItemSelectedListener(){ @Override public void onItemSelected(AdapterView<?> parent, View view, int pos, long id) { Toast.makeText(parent.getContext(), "The planet is " + parent.getItemAtPosition(pos).toString(), Toast.LENGTH_LONG).show(); } @Override public void onNothingSelected(AdapterView<?> arg0) { }}); } }

    Read the article

  • How do I use XML prefixes in C#?

    - by Andrew Mock
    EDIT: I have now published my app: http://pastebin.com/PYAxaTHU I was trying to make console-based application that returns my temperature. using System; using System.Xml; namespace GetTemp { class Program { static void Main(string[] args) { XmlDocument doc = new XmlDocument(); doc.LoadXml(downloadWebPage( "http://www.andrewmock.com/uploads/example.xml" )); XmlNamespaceManager man = new XmlNamespaceManager(doc.NameTable); man.AddNamespace("aws", "www.aws.com/aws"); XmlNode weather = doc.SelectSingleNode("aws:weather", man); Console.WriteLine(weather.InnerText); Console.ReadKey(false); } } } Here is the sample XML: <aws:weather xmlns:aws="http://www.aws.com/aws"> <aws:api version="2.0"/> <aws:WebURL>http://weather.weatherbug.com/WA/Kenmore-weather.html?ZCode=Z5546&Units=0&stat=BOTHL</aws:WebURL> <aws:InputLocationURL>http://weather.weatherbug.com/WA/Kenmore-weather.html?ZCode=Z5546&Units=0</aws:InputLocationURL> <aws:station requestedID="BOTHL" id="BOTHL" name="Moorlands ES" city="Kenmore" state=" WA" zipcode="98028" country="USA" latitude="47.7383346557617" longitude="-122.230278015137"/> <aws:current-condition icon="http://deskwx.weatherbug.com/images/Forecast/icons/cond024.gif">Mostly Cloudy</aws:current-condition> <aws:temp units="&deg;F">40.2</aws:temp> <aws:rain-today units=""">0</aws:rain-today> <aws:wind-speed units="mph">0</aws:wind-speed> <aws:wind-direction>WNW</aws:wind-direction> <aws:gust-speed units="mph">5</aws:gust-speed> <aws:gust-direction>NW</aws:gust-direction> </aws:weather> I'm just not sure how to use XML prefixes correctly here. What is wrong with this?

    Read the article

  • Pre Commit Hook for JSLint in Mercurial and Git

    - by jrburke
    I want to run JSLint before a commit into either a Mercurial or Git repo is done. I want this as an automatic step that is set up instead of relying on the developer (mainly me) remembering to run JSLint before-hand. I normally run JSLint while developing, but want to specify a contract on JS files that they pass JSLint before being committed to the repo. For Mercurial, this page spells out the precommit syntax, but the only variables that seem to be available are the parent1 and parent2 changeset IDs involved in the commit. What I really want are a list of file names that are involved with the commit, so that I can then choose the .js file and run jslint over them. Similar issue for GIT, the default info available as part of the precommit script seems limited. What might work is calling hg status/git status as part of the precommit script, parse that output to find JS files then do the work that way. I was hoping for something easier though, and I am not sure if calling status as part of a precommit hook reflect the correct information. For instance in Git if the changes files have not been added yet, but the git commit uses -a, would the files show up in the correct section of the git status output as being part of the commit set? Update: I got something working, it is visible here: http://github.com/jrburke/dvcs_jslint/

    Read the article

  • django+uploadify - don't working

    - by Erico
    Hi, I'm trying to use an example posted on the "github" the link is http://github.com/tstone/django-uploadify. And I'm having trouble getting work. can you help me? I followed step by step, but does not work. Accessing the "URL" / upload / the only thing is that returns "True" part of settings.py import os PROJECT_ROOT_PATH = os.path.dirname(os.path.abspath(file)) MEDIA_ROOT = os.path.join(PROJECT_ROOT_PATH, 'media') TEMPLATE_DIRS = ( os.path.join(PROJECT_ROOT_PATH, 'templates')) urls.py from django.conf.urls.defaults import * from django.conf import settings from teste.uploadify.views import * from django.contrib import admin admin.autodiscover() urlpatterns = patterns('', (r'^admin/', include(admin.site.urls)), url(r'upload/$', upload, name='uploadify_upload'), ) views.py from django.http import HttpResponse import django.dispatch upload_received = django.dispatch.Signal(providing_args=['data']) def upload(request, *args, **kwargs): if request.method == 'POST': if request.FILES: upload_received.send(sender='uploadify', data=request.FILES['Filedata']) return HttpResponse('True') models.py from django.db import models def upload_received_handler(sender, data, **kwargs): if file: new_media = Media.objects.create( file = data, new_upload = True, ) new_media.save() upload_received.connect(upload_received_handler, dispatch_uid='uploadify.media.upload_received') class Media(models.Model): file = models.FileField(upload_to='images/upload/', null=True, blank=True) new_upload = models.BooleanField() uploadify_tags.py from django import template from teste import settings register = template.Library() @register.inclusion_tag('uploadify/multi_file_upload.html', takes_context=True) def multi_file_upload(context, upload_complete_url): """ * filesUploaded - The total number of files uploaded * errors - The total number of errors while uploading * allBytesLoaded - The total number of bytes uploaded * speed - The average speed of all uploaded files """ return { 'upload_complete_url' : upload_complete_url, 'uploadify_path' : settings.UPLOADIFY_PATH, # checar essa linha 'upload_path' : settings.UPLOADIFY_UPLOAD_PATH, } template - uploadify/multi_file_upload.html {% load uploadify_tags }{ multi_file_upload '/media/images/upload/' %} <script type="text/javascript" src="{{ MEDIA_URL }}js/swfobject.js"></script> <script type="text/javascript" src="{{ MEDIA_URL }}js/jquery.uploadify.js"></script> <div id="uploadify" class="multi-file-upload"><input id="fileInput" name="fileInput" type="file" /></div> <script type="text/javascript">// <![CDATA[ $(document).ready(function() { $('#fileInput').uploadify({ 'uploader' : '/media/swf/uploadify.swf', 'script' : '{% url uploadify_upload %}', 'cancelImg' : '/media/images/uploadify-remove.png/', 'auto' : true, 'folder' : '/media/images/upload/', 'multi' : true, 'onAllComplete' : allComplete }); }); function allComplete(event, data) { $('#uploadify').load('{{ upload_complete_url }}', { 'filesUploaded' : data.filesUploaded, 'errorCount' : data.errors, 'allBytesLoaded' : data.allBytesLoaded, 'speed' : data.speed }); // raise custom event $('#uploadify') .trigger('allUploadsComplete', data); } // ]]</script>

    Read the article

  • ejb testing issues with netbeans and openejb

    - by SibzTer
    I have created a netbeans 6.7 EnterpriseApplication project with ejb and war modules with a test stateless session ejb with a simple sayHello() method. I also added the openEjb library in order to unit test the ejb. Everything runs fine except that I keep getting the following error: Testsuite: com.myapp.test.NewEmptyJUnitTest Apache OpenEJB 3.1.1 build: 20090530-06:18 http://openejb.apache.org/ INFO - openejb.home = C:\Users\me\Documents\NetBeansProjects\TestEnterpriseApp\TestEnterpriseApp-ejb INFO - openejb.base = C:\Users\me\Documents\NetBeansProjects\TestEnterpriseApp\TestEnterpriseApp-ejb INFO - Configuring Service(id=Default Security Service, type=SecurityService, provider-id=Default Security Service) INFO - Configuring Service(id=Default Transaction Manager, type=TransactionManager, provider-id=Default Transaction Manager) INFO - Found ClientModule in classpath: C:\Program Files\NetBeans 6.7.1\java2\ant\lib\ant.jar INFO - Found ClientModule in classpath: C:\Program Files\NetBeans 6.7.1\java2\ant\lib\ant-launcher.jar INFO - Found EjbModule in classpath: C:\Users\me\Documents\NetBeansProjects\TestEnterpriseApp\TestEnterpriseApp-ejb\build\jar INFO - Found ClientModule in classpath: C:\Users\me\Documents\NetBeansProjects\TestEnterpriseApp\lib\OpenEJB\xml-resolver-1.2.jar INFO - Found ClientModule in classpath: C:\Users\me\Documents\Downloads\glassfish\lib\webservices-tools.jar INFO - Beginning load: C:\Program Files\NetBeans 6.7.1\java2\ant\lib\ant.jar INFO - Beginning load: C:\Program Files\NetBeans 6.7.1\java2\ant\lib\ant-launcher.jar INFO - Beginning load: C:\Users\me\Documents\NetBeansProjects\TestEnterpriseApp\TestEnterpriseApp-ejb\build\jar INFO - Beginning load: C:\Users\me\Documents\NetBeansProjects\TestEnterpriseApp\lib\OpenEJB\xml-resolver-1.2.jar INFO - Beginning load: C:\Users\me\Documents\Downloads\glassfish\lib\webservices-tools.jar INFO - Configuring enterprise application: classpath.ear WARN - No application-client.xml found assuming annotations present: classpath.ear, module: ant.jar WARN - No application-client.xml found assuming annotations present: classpath.ear, module: ant-launcher.jar WARN - No application-client.xml found assuming annotations present: classpath.ear, module: xml-resolver-1.2.jar WARN - No application-client.xml found assuming annotations present: classpath.ear, module: webservices-tools.jar java.lang.Exception: Could not load 1/0/com/sun/codemodel/CodeWriter.class at org.apache.xbean.finder.ClassFinder.readClassDef(ClassFinder.java:730) .... Turns out that I am getting the glassfish library webservices-tools.jar from somewhere somehow and I cant find out how to get rid of it so that I dont get the bunch of Exceptions whenever I try to run any junit tests. Has anyone faced this issue before? Can you help me resolve it please? Thanks.

    Read the article

  • Use of qsrand, random method that is not random

    - by Andy M
    Hey everyone, I'm having a strange problem here, and I can't manage to find a good explanation to it, so I thought of asking you guys : Consider the following method : int MathUtility::randomize(int Min, int Max) { qsrand(QTime::currentTime().msec()); if (Min > Max) { int Temp = Min; Min = Max; Max = Temp; } return ((rand()%(Max-Min+1))+Min); } I won't explain you gurus what this method actually does, I'll instead explain my problem : I realised that when I call this method in a loop, sometimes, I get the same random number over and over again... For example, this snippet... for(int i=0; i<10; ++i) { int Index = MathUtility::randomize(0, 1000); qDebug() << Index; } ...will produce something like : 567 567 567 567...etc... I realised too, that if I don't call qsrand everytime, but only once during my application's lifetime, it's working perfectly... My question : Why ?

    Read the article

  • what can be causes of http server crash?

    - by mithunmo
    Hello , I am using WAMP server on Windows XP. - Apache 2.2.11 - MySQL 5.1.36 (INNODB engine) - PHP 5.3.0 I observe that my WAMP server crashes in the following scenarios 1) IF I use a Low end PC ( low processor speed and low RAM) 2) After making some changes to httpd.conf file .For eg changing the Allow from IP address . But here it crashes only once and then it starts to work fine. 3) Random crashes CRASH LOG szAppName : httpd.exe szAppVer : 2.2.11.0 szModName : php5ts.dll szModVer : 5.3.0.0 offset : 0000c309 C:\DOCUME~1\blrcom\LOCALS~1\Temp\WERc677.dir00\httpd.exe.mdmp C:\DOCUME~1\blrcom\LOCALS~1\Temp\WERc677.dir00\appcompat.txt My questions 1) Does high CPU utilization/LOW RAM can also cause the HTTP server to crash ? 2) excessive file reading as in every 10 seconds ? 3) unlimited script execution time . I have set the maximum execution time in php script to 0 as my script has to execute for sometimes 2-3 days. Is there any way to avoid this ? 4) Access to Database ? Should we use lock before reading and writing Can these be the reasons for random wamp server crashes ? OR is is some other programming error ? Please guide me . Regards, Mithun

    Read the article

  • Beanshell in Ant yielding, "Unable to create javax script engine for beanshell"

    - by John B.
    Greeting, I'm trying to put some Beanshell script in my Ant build.xml file. I've followed the Ant manual as well as I can but I keep getting "Unable to create javax script engine for beanshell" when I run Ant. Here is the test target I wrote mostly from examples in the Ant manual: <target name="test-target"> <script language="beanshell" setbeans="true"> <classpath> <fileset dir="c:\TEMP" includes="*.jar" /> </classpath> System.out.println("Hello world"); </script> </target> My beanshell "bsh-2.0b4.jar" file is on the script task's classpath the way the manual recommended. Hope I have the right file. I'm working in c:\TEMP right now. I've been googling and trying for a while now. Any ideas would be greatly appreciated. Thanks.

    Read the article

  • Ant target generate empty suite xml file

    - by user200317
    I am using ant for my project and I have been trying to generate JUnit report using ant target. The problem I run in to is that at the end of the execution my TESTS-TestSuites.xml is empty. But all the other individual test xml files have data. And due to this my html reports are empty, in the sense results shows "0". Here is my ant target <!-- JUnit Reporting --> <target name="test-report" depends="build-all" description="Generate Test Results as HTML"> <taskdef name="junitreport" classname="org.apache.tools.ant.taskdefs.optional.junit.XMLResultAggregator"/> <junit printsummary="on" haltonfailure="off" haltonerror="off" fork="yes"> <batchtest fork="yes" todir="${test.reports}" filtertrace="on"> <fileset dir="${build.classes}" includes="**/Test*Selenium.class"/> </batchtest> <formatter type="plain" usefile="false"/> <formatter type="xml" usefile="true"/> <classpath> <path refid="classpath"/> <path refid="application"/> </classpath> </junit> <echo message="running JUnit Report" /> <junitreport todir="${test.reports}"> <fileset dir="${test.reports}"> <include name="Test-*.xml" /> </fileset> <report format="frames" todir="${test.reports.html}" /> </junitreport> </target> This is what I get as ant print summary, [junitreport] Processing C:\YukonSelenium\reports\TESTS-TestSuites.xml to C:\DOCUME~1\user\LOCALS~1\Temp\null1848051184 [junitreport] Loading stylesheet jar:file:/C:/DevApps/apache-ant-1.7.1/lib/ant junit.jar!/org/apache/tools/ant/taskdefs/optional/junit/xsl/junit-frames.xsl [junitreport] Transform time: 859ms [junitreport] Deleting: C:\DOCUME~1\user\LOCALS~1\Temp\null1848051184 Here's how junit report looks like http://www.freeimagehosting.net/image.php?43dd69d3b8.jpg Thanks in advance,

    Read the article

< Previous Page | 459 460 461 462 463 464 465 466 467 468 469 470  | Next Page >