Search Results

Search found 42115 results on 1685 pages for 'access management'.

Page 464/1685 | < Previous Page | 460 461 462 463 464 465 466 467 468 469 470 471  | Next Page >

  • Wireless router blocking some sites while using ethernet is fine

    - by Micke
    I'm using Windows 7 and my router is a wireless Apple Airport Express that is approximately two years old. Suddenly I can't access some sites (for example www.sthlm.friskissvettis.se, or www.vegetarian-shoes.co.uk, some streamed tv-shows on svtplay.se, and a number of other random sites) when connecting to internet with my router. It worked good until recently and I'm fairly sure this problem emerged when my ISP upgraded from 10/10mbit to 100/10mbit speed. Most other sites like facebook and google works fine. When using my network cable to connect to internet everything works fine and I can access these sites. Firmware is current and I've tried reseting the router to factory defaults. Tried different browsers, and I can't ping the "blocked" sites either. Tracert www.sthlm.friskissvettis.se starts with 10.0.0.1 and continues through a number of long addresses until it says timeout. The last working address before timeout was sth-tcy-ipcore01-ge-0-2-0.neq.dgcsystems.net [83.241.252.13], if it matters. Tracert www.vegetarian-shoes.co.uk also eventually gives me a timeout. When the network cable is plugged in, I still get timeout on tracert www.sthlm.friskissvettis.se even though I can access the site in Chrome. Weird. www.vegetarian-shoes.co.uk doesn't give me a tracert timeout when the cable is plugged in, and I can access the site as usual. I've tried changing DNS servers to use opendns servers instead, but to no use. I've tried pinging these two sites with a lower MTU packet size (with this method: http://www.richard-slater.co.uk/archives/2009/10/23/change-your-mtu-under-vista-or-windows-7/), but still can't access them through ping... I don't know what to do anymore.... any suggestions???

    Read the article

  • OpenVZ multiple networks on CTs

    - by picca
    I have Hardware Node (HN) which has 2 physical interfaces (eth0, eth1). I'm playing with OpenVZ and want to let my containers (CTs) have access to both of those interfaces. I'm using basic configuration - venet. CTs are fine to access eth0 (public interface). But I can't get CTs to get access to eth1 (private network). I tried: # on HN vzctl set 101 --ipadd 192.168.1.101 --save vzctl enter 101 ping 192.168.1.2 # no response here ifconfig # on CT returns lo (127.0.0.1), venet0 (127.0.0.1), venet0:0 (95.168.xxx.xxx), venet0:1 (192.168.1.101) I believe that the main problem is that all packets flows through eth0 on HN (figured out using tcpdump). So the problem might be in routes on HN. Or is my logic here all wrong? I just need access to both interfaces (networks) on HN from CTs. Nothing complicated.

    Read the article

  • TP-Link storage server accessing from Mac OS

    - by coure2011
    I have a storage/print server by TP-Link http://www.tp-link.com/en/products/details/?categoryid=232&model=TL-PS310U I just connect usb-storage to the print server and on windows I can access that usb-device from my windows computers. But how can I access that device from Mac? I found an article that I can add usb printer to mac using that device but not able to find how to access the storage device. please help me out!

    Read the article

  • two computers on same network cannot ping eachother nor view NetBios resources

    - by slava
    I'd like to find out the problem of my network configuration I have network configuration is like in this diagram: The problem is between laptop1 and laptop2. At first I thought it was samba server problem. I was configuring samba server on one of the laptops and I wasn't able to access the shares from the second laptop no matter what I was doing. After installing/removing/configuring samba-server a couple of times I realized that the problem resides somewhere else. Laptop configurations: - Laptop1: ubuntu 12.04 - Laptop2: Windows 7/ ubuntu 12.04 ( dual boot ) - Server : ubuntu 12.04 When I do "ping 192.168.0.10" from laptop2, I get "Destination host unreachable". The same situation is when I ping in other direction. When I access Laptop1 shares from Laptop2, having windows 7 loaded, I get the error message: "Error code: 0x80070035 The network path was not found." When I ping "server" or "router" or "wifi router" from any of laptops I get a reply. The same with windows shares, I am able to access "server"s shares from Windows and Ubuntu, from any of my laptops. Netbios can't function correctly, that's obvious, I am unable to access windows shares between laptops. I assume that on "wifi router" is a miss-configuration, but I can't find what specifically. The "Wifi router" works as Hub + wifi, it is connected to "router" not in WAN port but in LAN1. Please, help me correctly configure the router to make them see each-other, or at least make NetBios work correctly, between laptops, to be able to access windows shares. Thanks!

    Read the article

  • 802.11N Windows XP Clients Unable to See Each Other

    - by zippy_raggle
    I am attempting to update my wireless network from 802.11g to 802.11n. When connected to the 'G' access point, the client laptops (there are 7 running Windows XP) are able to connect and browse the network for each other. When I connect them to the 'N' access point they can see the access point, but not the rest of the network. I tried swapping out the access point with a wireless router, but this did not change anything. I verified in both the AP and the router that isolation was turned off. Searching the web has not turned up any other ideas. The manuals don't show anything either. Why can't my wireless client nodes see each other on the 'N' network?

    Read the article

  • Configuring OpenLDAP and SSL

    - by Stormshadow
    I am having trouble trying to connect to a secure OpenLDAP server which I have set up. On running my LDAP client code java -Djavax.net.debug=ssl LDAPConnector I get the following exception trace (java version 1.6.0_17) trigger seeding of SecureRandom done seeding SecureRandom %% No cached client session *** ClientHello, TLSv1 RandomCookie: GMT: 1256110124 bytes = { 224, 19, 193, 148, 45, 205, 108, 37, 101, 247, 112, 24, 157, 39, 111, 177, 43, 53, 206, 224, 68, 165, 55, 185, 54, 203, 43, 91 } Session ID: {} Cipher Suites: [SSL_RSA_WITH_RC4_128_MD5, SSL_RSA_WITH_RC4_128_SHA, TLS_RSA_WITH_AES_128_CBC_SHA, TLS_DHE_RSA_WITH_AES_128_CBC_SHA, TLS_DHE_DSS_WITH_AES_128_CBC_SHA, SSL_RSA_W ITH_3DES_EDE_CBC_SHA, SSL_DHE_RSA_WITH_3DES_EDE_CBC_SHA, SSL_DHE_DSS_WITH_3DES_EDE_CBC_SHA, SSL_RSA_WITH_DES_CBC_SHA, SSL_DHE_RSA_WITH_DES_CBC_SHA, SSL_DHE_DSS_WITH_DES_CBC_SH A, SSL_RSA_EXPORT_WITH_RC4_40_MD5, SSL_RSA_EXPORT_WITH_DES40_CBC_SHA, SSL_DHE_RSA_EXPORT_WITH_DES40_CBC_SHA, SSL_DHE_DSS_EXPORT_WITH_DES40_CBC_SHA] Compression Methods: { 0 } *** Thread-0, WRITE: TLSv1 Handshake, length = 73 Thread-0, WRITE: SSLv2 client hello message, length = 98 Thread-0, received EOFException: error Thread-0, handling exception: javax.net.ssl.SSLHandshakeException: Remote host closed connection during handshake Thread-0, SEND TLSv1 ALERT: fatal, description = handshake_failure Thread-0, WRITE: TLSv1 Alert, length = 2 Thread-0, called closeSocket() main, handling exception: javax.net.ssl.SSLHandshakeException: Remote host closed connection during handshake javax.naming.CommunicationException: simple bind failed: ldap.natraj.com:636 [Root exception is javax.net.ssl.SSLHandshakeException: Remote host closed connection during hands hake] at com.sun.jndi.ldap.LdapClient.authenticate(Unknown Source) at com.sun.jndi.ldap.LdapCtx.connect(Unknown Source) at com.sun.jndi.ldap.LdapCtx.<init>(Unknown Source) at com.sun.jndi.ldap.LdapCtxFactory.getUsingURL(Unknown Source) at com.sun.jndi.ldap.LdapCtxFactory.getUsingURLs(Unknown Source) at com.sun.jndi.ldap.LdapCtxFactory.getLdapCtxInstance(Unknown Source) at com.sun.jndi.ldap.LdapCtxFactory.getInitialContext(Unknown Source) at javax.naming.spi.NamingManager.getInitialContext(Unknown Source) at javax.naming.InitialContext.getDefaultInitCtx(Unknown Source) at javax.naming.InitialContext.init(Unknown Source) at javax.naming.InitialContext.<init>(Unknown Source) at javax.naming.directory.InitialDirContext.<init>(Unknown Source) at LDAPConnector.CallSecureLDAPServer(LDAPConnector.java:43) at LDAPConnector.main(LDAPConnector.java:237) Caused by: javax.net.ssl.SSLHandshakeException: Remote host closed connection during handshake at com.sun.net.ssl.internal.ssl.SSLSocketImpl.readRecord(Unknown Source) at com.sun.net.ssl.internal.ssl.SSLSocketImpl.performInitialHandshake(Unknown Source) at com.sun.net.ssl.internal.ssl.SSLSocketImpl.readDataRecord(Unknown Source) at com.sun.net.ssl.internal.ssl.AppInputStream.read(Unknown Source) at java.io.BufferedInputStream.fill(Unknown Source) at java.io.BufferedInputStream.read1(Unknown Source) at java.io.BufferedInputStream.read(Unknown Source) at com.sun.jndi.ldap.Connection.run(Unknown Source) at java.lang.Thread.run(Unknown Source) Caused by: java.io.EOFException: SSL peer shut down incorrectly at com.sun.net.ssl.internal.ssl.InputRecord.read(Unknown Source) ... 9 more I am able to connect to the same secure LDAP server however if I use another version of java (1.6.0_14) I have created and installed the server certificates in the cacerts of both the JRE's as mentioned in this guide -- OpenLDAP with SSL When I run ldapsearch -x on the server I get # extended LDIF # # LDAPv3 # base <dc=localdomain> (default) with scope subtree # filter: (objectclass=*) # requesting: ALL # # localdomain dn: dc=localdomain objectClass: top objectClass: dcObject objectClass: organization o: localdomain dc: localdomain # admin, localdomain dn: cn=admin,dc=localdomain objectClass: simpleSecurityObject objectClass: organizationalRole cn: admin description: LDAP administrator # search result search: 2 result: 0 Success # numResponses: 3 # numEntries: 2 On running openssl s_client -connect ldap.natraj.com:636 -showcerts , I obtain the self signed certificate. My slapd.conf file is as follows ####################################################################### # Global Directives: # Features to permit #allow bind_v2 # Schema and objectClass definitions include /etc/ldap/schema/core.schema include /etc/ldap/schema/cosine.schema include /etc/ldap/schema/nis.schema include /etc/ldap/schema/inetorgperson.schema # Where the pid file is put. The init.d script # will not stop the server if you change this. pidfile /var/run/slapd/slapd.pid # List of arguments that were passed to the server argsfile /var/run/slapd/slapd.args # Read slapd.conf(5) for possible values loglevel none # Where the dynamically loaded modules are stored modulepath /usr/lib/ldap moduleload back_hdb # The maximum number of entries that is returned for a search operation sizelimit 500 # The tool-threads parameter sets the actual amount of cpu's that is used # for indexing. tool-threads 1 ####################################################################### # Specific Backend Directives for hdb: # Backend specific directives apply to this backend until another # 'backend' directive occurs backend hdb ####################################################################### # Specific Backend Directives for 'other': # Backend specific directives apply to this backend until another # 'backend' directive occurs #backend <other> ####################################################################### # Specific Directives for database #1, of type hdb: # Database specific directives apply to this databasse until another # 'database' directive occurs database hdb # The base of your directory in database #1 suffix "dc=localdomain" # rootdn directive for specifying a superuser on the database. This is needed # for syncrepl. rootdn "cn=admin,dc=localdomain" # Where the database file are physically stored for database #1 directory "/var/lib/ldap" # The dbconfig settings are used to generate a DB_CONFIG file the first # time slapd starts. They do NOT override existing an existing DB_CONFIG # file. You should therefore change these settings in DB_CONFIG directly # or remove DB_CONFIG and restart slapd for changes to take effect. # For the Debian package we use 2MB as default but be sure to update this # value if you have plenty of RAM dbconfig set_cachesize 0 2097152 0 # Sven Hartge reported that he had to set this value incredibly high # to get slapd running at all. See http://bugs.debian.org/303057 for more # information. # Number of objects that can be locked at the same time. dbconfig set_lk_max_objects 1500 # Number of locks (both requested and granted) dbconfig set_lk_max_locks 1500 # Number of lockers dbconfig set_lk_max_lockers 1500 # Indexing options for database #1 index objectClass eq # Save the time that the entry gets modified, for database #1 lastmod on # Checkpoint the BerkeleyDB database periodically in case of system # failure and to speed slapd shutdown. checkpoint 512 30 # Where to store the replica logs for database #1 # replogfile /var/lib/ldap/replog # The userPassword by default can be changed # by the entry owning it if they are authenticated. # Others should not be able to see it, except the # admin entry below # These access lines apply to database #1 only access to attrs=userPassword,shadowLastChange by dn="cn=admin,dc=localdomain" write by anonymous auth by self write by * none # Ensure read access to the base for things like # supportedSASLMechanisms. Without this you may # have problems with SASL not knowing what # mechanisms are available and the like. # Note that this is covered by the 'access to *' # ACL below too but if you change that as people # are wont to do you'll still need this if you # want SASL (and possible other things) to work # happily. access to dn.base="" by * read # The admin dn has full write access, everyone else # can read everything. access to * by dn="cn=admin,dc=localdomain" write by * read # For Netscape Roaming support, each user gets a roaming # profile for which they have write access to #access to dn=".*,ou=Roaming,o=morsnet" # by dn="cn=admin,dc=localdomain" write # by dnattr=owner write ####################################################################### # Specific Directives for database #2, of type 'other' (can be hdb too): # Database specific directives apply to this databasse until another # 'database' directive occurs #database <other> # The base of your directory for database #2 #suffix "dc=debian,dc=org" ####################################################################### # SSL: # Uncomment the following lines to enable SSL and use the default # snakeoil certificates. #TLSCertificateFile /etc/ssl/certs/ssl-cert-snakeoil.pem #TLSCertificateKeyFile /etc/ssl/private/ssl-cert-snakeoil.key TLSCipherSuite TLS_RSA_AES_256_CBC_SHA TLSCACertificateFile /etc/ldap/ssl/server.pem TLSCertificateFile /etc/ldap/ssl/server.pem TLSCertificateKeyFile /etc/ldap/ssl/server.pem My ldap.conf file is # # LDAP Defaults # # See ldap.conf(5) for details # This file should be world readable but not world writable. HOST ldap.natraj.com PORT 636 BASE dc=localdomain URI ldaps://ldap.natraj.com TLS_CACERT /etc/ldap/ssl/server.pem TLS_REQCERT allow #SIZELIMIT 12 #TIMELIMIT 15 #DEREF never Why is it that I can connect to the same server using one version of JRE while I cannot with another ?

    Read the article

  • Where can I find WebSphere configuration files?

    - by Nicholas Key
    Hi there, I would like to know where are the WebSphere configuration details saved? Specifically, configuration details that are shown in the Administrative Console (from the web) or from the console using wsadmin. Some of the examples would be: Java and Process Management: Class loader, Process definition, Process execution Container Settings: Session management, SIP Container Settings, Web Container Settings, Portlet Container Settings Are there XML files that persist these configuration details? Nicholas

    Read the article

  • Cannot open the device or file specified for office files

    - by MadBoy
    Recently I've noticed on couple of computers that when users try to open Office files or links (to server path) to office files they get this error "Windows cannot access the specified device path or file", but the files itself open up without problems. This happened on 4 Windows XP computers already with Office 2003 installed. One one computer it was XLSX file being opened and every time user executed it, it opened up, but the error pops out. On the other hand when I open it directly from Office it works fine, without error. On another 3 computers it was after user pressed on the link to Access DB and it error out, but Access began MSI configuration (since it was first time user logged in to his computer) and in the end it opened up properly. After closing access and doing it again problem disappeared. Some faulty patch ? Eset Smart Security 4 is installed.

    Read the article

  • Unable to connect to SVN server on VPS : Subversion Configuration Problem

    - by Pritam Barhate
    Hello everybody, I purchased a VPS account (centos-5-x86_64) from Hostgator mainly for the purpose of setting up an online Subversion Server. This is the first time I am managing a VPS and my linux skills are not so great, but I have basic knowledge of the OS and have been using it on and off as desktop from last few years. So after foxing through a few tutorials online, as the first step I logged in using SSH root account provided by Hostgator and tried to run, yum install mod_dav_svn subversion As it turns out my account has Cpanel/WHM and since it some concept of easy apache straight forward procedure of yum install mod_dav_svn subversion won't work. After that I found out how it can be worked out by compiling the source and stuff. But the whole procedure looked long and scary. [I am just a linux nub]. so I decided I would just skip whole apache integration stuff and just access the server using svn:// protocol, anyways that's how I configure svn on our LAN. So I installed subversion using yum install subversion It installed fine. Then I created a folder /svn_repos/testproject and ran svnadmin create /svn_repos/testproject/ No Problems Using vi I changed svnserve.conf and passwd files for the repository and added a user with my name. Anonymous users don't have any access, authenticated users have write access. Then I started svnserve using svnserve -d then in same terminal window svn list svn://localhost/svn_repos/testproject Asks for authentication for realm, provided root password then for svn username and password. Provided both. The command returns nothing but exists properly. Returns nothing is understood I didn't import anything. But if try to access svn remotely using in another terminal: svn list svn://ip.add.of.server/svn_repos/testproject svn: Can't connect to host 'ip.add.of.server': Operation timed out Is what I get. Parallels Power Panel that I got from Hostgator reports that: The firewall is not active now. To activate the firewall, choose one of the firewall operation modes. So if firewall is not running and I can access svn using localhost, why the operation is timing out when I try to access svn from a remote machine? Experienced network admins please help. Thanks in advance. Also please suggest a good book which gives detailed information on configuring Dedicated servers + WHM and CPanel.

    Read the article

  • IIS Strategies for Accessing Secured Network Resources

    - by Emtucifor
    Problem: A user connects to a service on a machine, such as an IIS web site or a SQL Server database. The site or the database need to gain access to network resources such as file shares (the most common) or a database on a different server. Permission is denied. This is because the user the service is running as doesn't have network permissions in the first place, or if it does, it doesn't have rights to access the remote resource. I keep running into this problem over and over again and am tired of not having a really solid way of handling it. Here are some workarounds I'm aware of: Run IIS as a custom-created domain user who is granted high permissions If permissions are granted one file share at a time, then every time I want to read from a new share, I would have to ask a network admin to add it for me. Eventually, with many web sites reading from many shares, it is going to get really complicated. If permissions are just opened up wide for the user to access any file shares in our domain, then this seems like an unnecessary security surface area to present. This also applies to all the sites running on IIS, rather than just the selected site or virtual directory that needs the access, a further surface area problem. Still use the IUSR account but give it network permissions and set up the same user name on the remote resource (not a domain user, a local user) This also has its problems. For example, there's a file share I am using that I have full rights to for sharing, but I can't log in to the machine. So I have to find the right admin and ask him to do it for me. Any time something has to change, it's another request to an admin. Allow IIS users to connect as anonymous, but set the account used for anonymous access to a high-privilege one This is even worse than giving the IIS IUSR full privileges, because it means my web site can't use any kind of security in the first place. Connect using Kerberos, then delegate This sounds good in principle but has all sorts of problems. First of all, if you're using virtual web sites where the domain name you connect to the site with is not the base machine name (as we do frequently), then you have to set up a Service Principal Name on the webserver using Microsoft's SetSPN utility. It's complicated and apparently prone to errors. Also, you have to ask your network/domain admin to change security policy for the web server so it is "trusted for delegation." If you don't get everything perfectly right, suddenly your intended Kerberos authentication is NTLM instead, and you can only impersonate rather than delegate, and thus no reaching out over the network as the user. Also, this method can be problematic because sometimes you need the web site or database to have permissions that the connecting user doesn't have. Create a service or COM+ application that fetches the resource for the web site Services and COM+ packages are run with their own set of credentials. Running as a high-privilege user is okay since they can do their own security and deny requests that are not legitimate, putting control in the hands of the application developer instead of the network admin. Problems: I am using a COM+ package that does exactly this on Windows Server 2000 to deliver highly sensitive images to a secured web application. I tried moving the web site to Windows Server 2003 and was suddenly denied permission to instantiate the COM+ object, very likely registry permissions. I trolled around quite a bit and did not solve the problem, partly because I was reluctant to give the IUSR account full registry permissions. That seems like the same bad practice as just running IIS as a high-privilege user. Note: This is actually really simple. In a programming language of your choice, you create a class with a function that returns an instance of the object you want (an ADODB.Connection, for example), and build a dll, which you register as a COM+ object. In your web server-side code, you create an instance of the class and use the function, and since it is running under a different security context, calls to network resources work. Map drive letters to shares This could theoretically work, but in my mind it's not really a good long-term strategy. Even though mappings can be created with specific credentials, and this can be done by others than a network admin, this also is going to mean that there are either way too many shared drives (small granularity) or too much permission is granted to entire file servers (large granularity). Also, I haven't figured out how to map a drive so that the IUSR gets the drives. Mapping a drive is for the current user, I don't know the IUSR account password to log in as it and create the mappings. Move the resources local to the web server/database There are times when I've done this, especially with Access databases. Does the database have to live out on the file share? Sometimes, it was just easiest to move the database to the web server or to the SQL database server (so the linked server to it would work). But I don't think this is a great all-around solution, either. And it won't work when the resource is a service rather than a file. Move the service to the final web server/database I suppose I could run a web server on my SQL Server database, so the web site can connect to it using impersonation and make me happy. But do we really want random extra web servers on our database servers just so this is possible? No. Virtual directories in IIS I know that virtual directories can help make remote resources look as though they are local, and this supports using custom credentials for each virtual directory. I haven't been able to come up with, yet, how this would solve the problem for system calls. Users could reach file shares directly, but this won't help, say, classic ASP code access resources. I could use a URL instead of a file path to read remote data files in a web page, but this isn't going to help me make a connection to an Access database, a SQL server database, or any other resource that uses a connection library rather than being able to just read all the bytes and work with them. I wish there was some kind of "service tunnel" that I could create. Think about how a VPN makes remote resources look like they are local. With a richer aliasing mechanism, perhaps code-based, why couldn't even database connections occur under a defined security context? Why not a special Windows component that lets you specify, per user, what resources are available and what alternate credentials are used for the connection? File shares, databases, web sites, you name it. I guess I'm almost talking about a specialized local proxy server. Anyway, so there's my list. I may update it if I think of more. Does anyone have any ideas for me? My current problem today is, yet again, I need a web site to connect to an Access database on a file share. Here we go again...

    Read the article

  • NTFS Permissions-Special Permissions not working

    - by Srinivas
    I am using Windows 2008 R2 Server having a CENTRAL SHARED FOLDER (CENTRALSTORAGE). We are trying to give Domain Users in the Network access as like User1-\CentralStorage\IT\User1 and User2-\CentralStorage\IT\User2. But it is not working when i try to login to that user in Windows XP system which is already a registered computer of domain. Will someone help me in guiding how to declare permissions like \CentralStorage\IT - this is a Main Directory and should be accessed to VIEW folder sub-directories but not to DELETE/RENAME this folder. \CentralStorage\IT\User1 - Full Control to the User1 to ADD SUB-FOLDERS AND FILES. But not to delete/rename this folder name. I gave access using Special Permissions but it is showing as Access Denied when i logon and try to access. Kindly provide me a solution for the same.

    Read the article

  • Windows 8 - IE 10 Metro - How to print or save a webpage

    - by AbhishekGirish
    I'm running Windows 8 Pro. My default browser is Internet Explorer 10 (and hence opens as a Modern Windows 8 app). I want to know how to print or save a webpage. There are no related settings available in the browser. The only option is to select "View on Desktop" and the browser interface familiar to IE 9 opens up on the desktop, through which I could access the above said options and additional settings. I know the Desktop is not going away anytime soon and that its still an important part of Windows. But if Microsoft is pitching for the Modern Windows UI, why would they leave out important options such as print & save from it and force a user to access the "old" Desktop mode for the same? Even Windows 8 RT supports plug-and-play access to Printers & Peripherals. So not being able to Print from a tablet or access the File System is definitely not an answer.

    Read the article

  • Apache Reverse proxy for intranet and other integrated application on intranet

    - by user1433448
    I'm trying to configure a reverse proxy (ssl) with apache 2.2 in Debian Squeeze, but I have some problems, specially with some path absolute and with https I'll try to detail what I have made and what I'm trying to configure I have a server Debian Squeeze with apache2.2 + mod_proxy_html with: # apt-get install libapache2-mod-proxy-html libxml2-dev # a2enmod proxy # a2enmod proxy_http # a2enmod proxy_html # a2enmod headers After that I have configured a virtual host with: reverse_proxy_ssl.conf I'm trying to configure to allow access of our intranet from internet with a reverse proxy (apache that is located in DMZ). With this configuration domain.com/intranet works correctly and we can access to intranet, but we have one problem when from domain.com/intranet we need to use another internal application that is called from intranet with absolute path ( https://192.168.10.25/application/) and from internet appears that try to access with internal ip, and this link es incorrect from external site We only need to access from intranet to multiple internal application that are in external server and we like to restrict to minimal access from internet. All the application that are in the smae server of intranet are working. The second problem is with https and reverse proxy in our firewall appears some errors with packets (not valid packets), and with https seems to work. What can I do to solve this problems (absolute path and ssl problem) Thanks

    Read the article

  • Can a hardware firewall block a server accessing its OWN UNC shares?

    - by Simon
    I need to set up a UNC share for my hosted dedicated server to access a share on itself. Unfortunately TFS requires a UNC share. I am on a Windows Server 2008 Standard SP2 64bit dedicated server behind a PIX 501 firewall hosted with GoDaddy. I just cannot get the server to access itself and get this error: Windows cannot access \\SERVER\SHARE Check the spelling of the name.. etc. I've found numerous questions about this but no answer to my problem. Server 2008 Standard x64 SP2 Workgroup - not domain Windows Firewall is off Computer browser service is on I am trying to access \\MYMACHINE\TFS-BUILDS by typing in - or double clicking. Neither works. Machine has single network card Filesharing wizard says share was ok Share was showing under 'Computer management' Permissions are set to 'everyone' full control No obvious errors in eventlog Reboot didn't fix it Unfortunately I cannot try to access other shares in or out of this machine because it is a hosted dedicated server and the only machine behind a hardware firewall. The only thing left i can think of is that the hardware firewall needs to be configured. Is this possible? Does 'UNC traffic' go out of the machine and then back in again?

    Read the article

  • Myvidoop error when trying to log in

    - by paul-werner.mp
    Recently I have not been able to get into my myvidoop username. It won't even bring up the pictures and asks to send the access code to one of my email addresses. I have seen this message before and there was no error previously but now it will not send the access code. I've tried accessing the site through firefox and through IE but I get the same thing (whether I went through the add on to get to the site or just typed in the website). I just want to know if I possibly have something that could be blocking it from sending this out. I use the free version of Avira for protection, run Ad Muncher (but I've also tried to get this access code with Ad Muncher closed), and have Ad Block Pro plugin (but like I've said before, the same thing happens in IE). I know it uses Java to send this access code out and I've even updated Java but still cannot get it to send it to me.

    Read the article

  • Apache Forbidden: httpd.conf or File Permissions

    - by Alan Storm
    When setting up an Apache virtual host, I'll occasionally get the following error when attempting to access the site. Forbidden You don't have permission to access / on this server. Is there any method to (or tool that will) tell me why Apache is denying access? (local rule in httpd.conf, file permissions, etc. I'm not looking for help with a specific configuration, instead I'm looking for a way to have the computer tell me what's wrong with my system and/or configuration.

    Read the article

  • Very strange networking problem in all computers in my house

    - by Anthony
    I have three computers in my house: One desktop (wired), and two laptops (wireless). I'm using Cox Communications (yes they suck), and yesterday they had a major outage. I know it was them because I called them up when I started losing connection to the internet. All the computers can connect just fine, but they don't have internet access. It just says "local only". The weird thing is, some of them work occasionally. For the first day my laptop was working perfectly, while all the other computers couldn't connect. Later on in the day it got reversed, and the desktop was the one with internet access. By the second day the problem on Cox's end was fixed, but we still had no access. I called them up and they reset my modem, and did the usual troubleshooting stuff. It never fixed the problem, but we found out that the problem had to do with conflicting IP addresses. My router was a Linksys WRT54G and it was about 5 years old. I figured it might have gotten damaged from the outage since it was so old, and now it's having trouble "fixing itself" and giving out the proper IP addresses. So I bought a new router, a Cisco Linksys E1000. I set everything up, and still the same problem. My computer has access right now (that's how I'm writing this), but no other computers seem to be able to get access. Is there possible damage to the modem? Can someone help me please? Sorry for this being so long.

    Read the article

  • Windows Vista file permissions does not inherit when copying to a network share

    - by vdboor
    I've got a network share with specific permissions on a subfolder (e.g. access to developers and freelancers). A designer copied PNG files from his local system to the network share. These files didn't inherit the folder permissions, but only gave access to Administrators. Is this a setting somewhere to restrict access, and can it be avoided? The local system uses Vista, the server uses Windows 2003.

    Read the article

  • External hard drive encryption

    - by Kragen
    I've got a complete backup of my main PC on 1.5 TB external hard drive that I carry around with my laptop so I can have access to all of my files while I'm on the move, however it has just dawned on me that if someone nicks my external hard drive they now have access to everything! Hence I'm looking for a way to encrypt my external hard drive. I'm after something that is: Secure (if I need to carry around a USB dongle to keep the key on so be it) Fast (the performance of the drive should still be reasonable) Cross-platform (I regularly use other peoples computers - Sometimes they are not windows based and might not even have internet access, however I still want to be able to access my files) Cheap (preferably free / open source!)

    Read the article

  • NAS share not accessible using a CNAME from Windows 2008 R2

    - by Roshan Raikar
    I have a NAS filer share say \xyz.abc.def.com. I am trying to access the share from Windows server 2008R2 Server. We have a CNAME xyz.def.com pointing to xyz.abc.def.com. I am able to access the share using \xyz.abc.def.com as well as the IP but unable to access the share using \xyz.def.com a) DisableStrictNameChecking is 1 on Windows Server 2008R2 b) NetBios over TCP is default. I tried setting it to Enabled but no luck I get the error 0x80004005, unspecified error

    Read the article

  • Cyrus: In practical terms, how do end users administer their shared mailboxes?

    - by Nick
    Let's say we have four customer service reps: Billy, Bob, Joe, and Tom. Tom is the department manager. There's a shared Customer Service mailbox on the Cyrus server that they all have access to. Tom, as the manager also has administrative privileges for the shared mailbox. They decide they want to create sub-folders a certain way, and Tom creates them. They're all running Thunderbird, so Tom right-clicks the main folder and chooses "New Subfolder". Now Tom has the Subfolders he needs and the other sales reps have... nothing! Because Cyrus created the Subfolders giving Tom "Full Access" permissions, and everyone else gets no access. So how does Tom give the other reps in his department access to the new folders? As far as Cyrus is concerned, Tom has permission to grant others access to his new mailboxes- But as far as I can tell, there's no option in Thunderbird for granting mailbox permissions. An IT staff member should not have to receive a support request every time someone wants to add a Subfolder to a shared mailbox. That's why we make certain users into mailbox admins in the first place! But asking (non-technical) users to SSH into an IMAP server to run cyradm seems like a bad idea too. Certainly someone has found a solution for this dilemma. Perhaps a Thunderbird extension for setting Cyrus permissions? Or something like umask that forces subfolders to have identical permissions to their parents on creation? And related, what about Sieve configuration? Is there anyway that can be done from the client machine too? Thanks, Nick

    Read the article

  • mount nfs subdirectory and still apply parent directory permissions

    - by Christophe Drevet
    A NFS server exports : /export/home computers /export/cont1 computers On the filesystem, there are these permissions : $ ls -al /export/cont1 drwxr-x--- 6 root group1 4096 2010-05-04 10:57 . drwxrwxrwx 5 root root 4096 2010-05-07 14:52 .. drwxrwxrwx 2 root root 4096 2010-05-06 20:33 .snapshot drwxr-xr-x 2 user1 group1 4096 2010-05-04 10:57 user1 drwxr-xr-x 2 user2 group1 4096 2010-05-04 10:57 user2 drwxr-xr-x 2 user3 group1 4096 2010-05-04 10:57 user3 So that user4, which is in not in the group1 can't access this directory and its subdirectories. Now, on its client machine, this user can do : $ sudo mount server:/export/cont1/user3 /mnt/temp and then access the directory without permissions on /export/cont1 : $ id uid=7943(user4) gid=7943(user4) groupes=1189(group4) $ ls -al /mnt/temp/ drwxr-xr-x 3 user3 group1 4096 2010-05-04 10:57 . drwxr-xr-x 7 root root 4096 2010-05-04 11:02 .. -rw-r--r-- 1 user3 group1 6 2010-05-04 10:56 README Is there a way to apply /export/cont1 permissions even if it is not mounted ? The goal is to enable users to mount /home/user3 and only access it if they can access /export/cont1 on the nfs server. Said in another way : how can I allow a machine to mount /export/cont1/user3 and still don't allow user4 to access it. Maybe NFSv4 and Kerberos can help ?

    Read the article

  • 403 on localhost with WAMP and windows 7

    - by Jon
    Hi, I'm sorry if this is a stupid question but I'm new to web development and I'm trying to set up a local server using WAMP. My problem is when I try to access localhost or localhost/index.php I get a 403 error. I can access http://localhost/myphpadmin so I think this is a permissions issue but I have full access (or so I think) over the folder. Thanks

    Read the article

  • Configuration Help for Sendmail Required

    - by Vinayak Mahadevan
    Hi I need some help with respect to sendmail configuration. The basic problem is that I have some employees working from other places and they need access to their mail. So what I have done right now is whatever mails which are meant for them which are generated from within the company and collected by my internal mail server is bounced to an external mail server from where the employees access it. This is done through a email id on a different domain. This was working fine till I restricted the external mailing access for certain users using rulesets in sendmail.cf. Once I had put that in place only people who had external mailing rights could send mails to people outside the office. What I would like to know is that is there anyway where I can expose sendmail on two different ips and thereby configure everybody's email id to point to the same internal mail server using 2 different ips. one ip when inside the company and one ip outside the company. Is it possible that I have one static ip configured for both internal access and external access or is there any otherway it can be done with sendmail. Can anybody help me Sorry for the long post Regards Vinayak

    Read the article

  • Cannot WMI Query root\MSCluster namespace as Local Admin

    - by Matt Zuberko
    I'm trying to use WMI Explorer to query the root\MSCluster namespace on various hosts to obtain cluster resource group and resource object data. I can access the namespace with no issue on Win2K3 cluster nodes but am getting an access denied error attempting to connect to Win2K8 and Win2K8R2 nodes. I can access the root\cimv2 namespace with no issue, just the MSCluster namespace even though I am a local Admin. Is there a feature setting, local security policy or server role I have to be a member of to access the namespace? Thank you!

    Read the article

< Previous Page | 460 461 462 463 464 465 466 467 468 469 470 471  | Next Page >