Search Results

Search found 18025 results on 721 pages for 'blue screen'.

Page 466/721 | < Previous Page | 462 463 464 465 466 467 468 469 470 471 472 473  | Next Page >

  • Archlinux/atheros WLAN configuration troubles

    - by GrinReaper
    I'm trying to config archlinux to use my wireless network adapter. It's quite troublesome. From what I've gathered, it's an atheros network adapter, using the ath5k driver/module... I can't get it to work; any ideas? Here's some of the output from my tinkering: # lspci | grep -i net 00:0a.0 Ethernet controller: nVidia corporation MCP67 Ethernet (reva2) 03:00.0 Ethernet controller: atheros communications inc. AR5001 Wireless Network Adapter (rev01) # lsusb ... Bus 004 Device 003: ID 03f0:17d Hewlett Packard Wireless (Bluetooth + WLAN Interface [Integrated Module] # ping -c 3 www.google.com ping: unknown host www.google.com #ping -c 3 8.8.8.8 ping: network is unreachable # lspci -v 03:00.0 Ethernet controller: atheros communications inc. AR5001 Wireless Network Adapter (rev01) ... Kernel driver in use: ath5k Kernel modules: ath5k # dmesg |grep ath5k registered as phy0 registered led device ath5k: atheros chip found PCI INT A disabled registered led device registered as phy1 # ip addr | sed '/^[0-9]/!d;s/: <.*$//' 1: lo 2: eth1 3: eth0 # ip link set <interface> up/down RNETLINK answers: Operation not possible due to RF-kill Also, is there a way to dump text from command-line to a text file so i can just copy pasta? Sorry, first time using a linux distro... EDIT: So I just tried this: I actually just did this twice. (I can't tell which setting is on/off for my wireless adapter. The lights are blue all the time now.) #rfkill list 0: hp-wifi: wireless lan softblocked: no hardblocked :yes 1: hp-bluetooth: bluetooth softblocked: no hardblocked :yes 3: phy1: wireless lan softblocked: no hardblocked :yes #rfkill list 0: hp-wifi: wireless lan softblocked: no hardblocked :no 1: hp-bluetooth: bluetooth softblocked: no hardblocked no 3: phy1: wireless lan softblocked: no hardblocked :yes 7: hci0: bluetooh 0: hp-wifi: wireless lan softblocked: no hardblocked :no I've dug around some other articles and it seems like ath5k is supposed to be preferable to madwifi, so should i be using madwifi? I'm 99% sure I disabled the hardblock (by turning it ON) but, as shown above, phy1 wireless lan is STILL hardblocked. What gives? Maybe I've made some more fundamental error in a basic config file? EDIT: I've fixed the hardblock. I've tried pinging www.google.com, but to no avail. I get: ping: unknown host www.google.com In the arch wiki: Edit /etc/hosts and add the same HOSTNAME you entered in /etc/rc.conf: 127.0.0.1 archlinux.domain.org localhost.localdomain localhost archlinux To my understanding, hostname is just a user-specified and based on preference(?) My /etc/rc.conf: HOSTNAME="gestalt" My /etc/hosts: 127.0.0.1 localhost.localdomain localhost gestalt but should it be the following? 120.0.0.1 localhost.domain.org localhost.localdomain localhost gestalt

    Read the article

  • Optimal setup for ASUS P6X58D Premium BIOS (no OC)?

    - by rumtscho
    Normally, I'd trust the mainboard manufacturer to choose the best options as defaults. But I had trouble with the board, because even with Quick Boot enabled, it booted twice as slowly as a Pentium 4 Celeron. Then I changed lots of options at once (most of them weren't explained in the manual, just mentioned with a single sentence) and the boot time is only marginally worse than the Pentium 4 (54 sec against 46 sec from button to pw entering screen). Now I don't know if I have turned something off which should have stayed on. I guess I even won't be able to boot from a CD now, because even though it is present in the boot sequence, I took off a timeout I think it needs to check whether there is a disk in the drive. The second reason is that I don't have an internal HDD, only a SSD. I forgot my sources blush but I am under the impression that today's BIOS and OS options are geared toward booting from a HDD, which is often less than optimal when one boots from a SSD, especially when there are functions which cause avoidable writing cycles, as a SSD wears out after too many writing cycles. Most of the things I've read concern the OS, but there are some BIOS-relevant options too. I am especially confused about the disk mode. The board supports AHCI, IDE-simulation and RAID, but of the different articles I've read, there is a proponent for each and no clear arguments for any. So can one tell me which options are important in general and which are important for a SSD-only system? I don't want to overclock the CPU, so you don't have to say anything about this (yes I know the board is meant for OC:)). I am thinking of overclocking the RAM, since they sold me 1600er heatsinked modules which are running at 1066 now, but I'm not sure yet about that. The rest of the system: i7-930, Intel X25-m G2, 6 GB RAM, GTS 250, some no-name Blue-ray ROM. 2 external HDDs over USB 2.0. Lots of other USB-connected hardware (12 devices I think), no SATA 3 drives (will disabling the controller have an impact on performance?), no LAN, only WiFi. Lucid Lynx 64 bit, no dual boot, no virtual installations. The main uses of the system are: managing and playing/showing all the media stored on the external disks, lots of image manipulation, some video editing, a bit of (non-demanding) gaming, rarely development. Lots of Internet surfing too, but this shouldn't have much impact on performance.

    Read the article

  • installing windows XP in Samsung SENS 145 plus notebook (no CD drive)

    - by user13267
    Hi I was trying to install Windows XP in a Samsung SENS 145 plus Notebook. It does not have a cd drive and I already managed to format it and semi install Windows XP, so now it does not even boot up either. This is what I did: Since it supports USB booting, I first made a bootable USB of Windows XP (Korean version; SP2 I think, may be SP 3) using Novicorp WinToFlash enter link description here. It managed to boot up at first and I was able to format the C driveand get Windows install to start up. It took forever to copy all the files from the USB and after the first reboot, before installation started, I cancelled the reboot from windows install, went to BIOS and changed the boot device priority from USB to internal hard drive. But now on bootup it showed me a list with two options for booting windows XP (much like in the case of a multi OS system) so I assumed that I had formatted drive D by mistake and installed XP there, instead of on C drive. Anyway, I chose one of them and it continued my Windows installation. I got the blue installation screen that shows ads about Windows XP on the right frame and estimated remaining time on the left. However, after completing the process, after the first reboot, instead of showing the Windows XP logo, it says \system32\hall.dll is missing (or corrupted I'm not sure, I needed to install the Korean version of windows and I could not exactly read the error message, however it was one that I have already seen in an English version installation, and I am sure it says either missing or corrupted). The problem is, now it shows the same error again when I try to reboot it from the USB drive as well. I tried to boot a portable version of Linux I made in another USB, but the computer does not boot up from that USB, and it shows hal.dll error when I try to boot it using the WIN XP installation USB I made, as well as when I try to boot it from the hard drive, where I suppose Win XP is now semiinstalled. So now I can't get the computer to start up at all, except going to the BIOS. What else can I try to solve this? Also, would it be possible to install XP on this computer by connecting it to another one running Windows 7 ultimate, through the ethernet card? That is, network just the two computers together, then install windows XP on the notebook from the desktop running windows 7? Please help, I'm running out of ideas on this one. If Korean version of windows XP is the problem then I am willing to install English version as well. (but I need to make sure if that is the real cause of the problem)

    Read the article

  • SSD Fresh Does Not Start

    - by Jim Fell
    I recently installed a new 60GB SSD as my primary hard drive and re-installed Windows 7 Professional 64-bit. I then installed SSD Fress from Abelssoft to optimize Windows to run on the SSD. It seemed to install okay, but when I try to run the utility, its splash screen appears briefly before it quietly closes. No errors are displayed; the utility just fails to launch. I have run SSD Fresh on another SSD-equipped Windows 7 Pro x64 computer in the past without any problems. Does anyone know what might be preventing the program from running? I tried shutting down the Spybot Resident and disabling the firewall and virus scanner with no luck. I also tried running the tool as administrator; I even tried reinstalling it, running the installer as administrator. No luck. Every time I try to launch the program the Event Viewer logs this same set of errors: Error 4/2/2012 11:35:44 PM Application Error 1000 (100) Error 4/2/2012 11:35:43 PM .NET Runtime 1026 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None For those who are interested, here is my system configuration: ASRock M3A770DE AM3 AMD 770 ATX AMD Motherboard AMD Athlon II X3 455 Rana 3.3GHz Socket AM3 95W Triple-Core Desktop Processor ADX455WFGMBOX G.SKILL Value Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10600) Desktop Memory Model F3-10600CL9D-8GBNT Mushkin Enhanced Chronos Deluxe MKNSSDCR60GB-DX 2.5" 60GB SATA III Synchronous MLC Internal Solid State Drive (SSD) (Primary/Boot HD) Western Digital Caviar Blue RFHWD1600AAJS 160GB 7200 RPM SATA 3.0Gb/s 3.5" Internal Hard Drive -Bare Drive (Secondary HD) Sony Optiarc CD/DVD Burner Black SATA Model AD-7261S-0B LightScribe Support RAIDMAX RX-850AE 850W ATX12V v2.3 / EPS12V SLI Certified CrossFire Ready 80 PLUS GOLD Certified Modular Active PFC Power Supply ASUS HD7850-DC2-2GD5 Radeon HD 7850 2GB 256-bit GDDR5 PCI Express 3.0 x16 HDCP Ready CrossFireX Support Video Card Asus ML228H 21.5" Full HD LED BackLight LED Monitor Slim Design (x3)

    Read the article

  • Win 8: Adding a boot volume to an MBR dynamic disk [NOT about changing to basic disks]

    - by Stilez
    (This is NOT aiming to convert to basic disk. In this question, the disk stays dynamic but becomes bootable) There doesn't seem to be a clear, well stated answer I can find, for the question "What are the criteria for Windows 8 to successfully boot from an MBR dynamic disk", or "how do I fix a dynamic MBR partition that's failing boot"? I've tried to educate myself but can't find crucial information to clear it all up. My existing HDD/SSD setup: DISK 0 ~ 60GB SSD/MBR/basic: (350MB recovery)(60GB windows 8 bootable) DISK 1 ~ 512GB SSD/MBR/dynamic: (350MB recovery)(60GB unallocated)(410GB mirrored data) DISK 2 ~ 512GB SSD/MBR/dynamic: (350MB recovery)(60GB unallocated)(410GB mirrored data) DISKS 3, 4, 5: (ignored for simplicity: 2xHDD RAID1 + caching SSD) I'm heavy duty on data crunching and virtualisation, just maxxed out 32GB RAM @ 2133 and moved to 4960X + 64GB. Disk 0 is a pure system disk of little value, and virtualisations runs off mirrored SSDs (Samsung 840 Pro 512 x 2) for double speed reading and so they snapshot in reasonable time. I'm using 4 SATA3 ports and the board only has two decent Intel ports (onboard Marvell are poorer quality). I'm wary of choosing between LSI, HighPoint and other 3rd party controllers as I'm unfamiliar with the maze of decent RAID cards (that's a whole other issue!). I want to cut down my SSD needs by moving the boot volume and caching volume to the 840 pros, giving a setup with 2 fewer SSDs: DISK 0 ~ 512GB SSD/MBR/dynamic: (350MB recovery)(60GB boot)(410GB mirrored data) DISK 1 ~ 512GB SSD/MBR/dynamic: (350MB recovery)(30GB cache for the ICH10R mirror)(30GB temp)(410GB mirrored data) DISKS 2, 3: (2xHDD RAID1) Intel's RST allows this, Win 8 allows booting off a MBR/dynamic disk, and the two 60GB SSDs are hardly the fastest SSDs anyway, they'll get repurposed. Moving the caching volume is easy. Moving the boot volume has me stumped. The difficulty is, I'm hitting a wall of knowledge here. I have a UEFI Asus motherboard with an previous traditional MBR/basic boot disk, and I want it to boot from a disk and volume that's MBR/dynamic. The disk copy is physically ok (Partition Wizard Server will copy to dynamic volumes) but then hits a light blue 0xc000000e boot error. No real surprise, I expected to have some boot fixing, but had expected Windows to boot-fix it (all drivers exist), or the usual manual fixes to work. Specifically, I don't know enough, to know what's got to be manually checked and perhaps corrected for the disk to boot (legacy/uefi/bios, odd partitions, boot tables, disk IDs, hidden boot files, oh my!), or if I need to change any of this secure boot/UEFI/legacy stuff in the bios, convert a 512 SSD to basic and then back to dynamic when working, or if the issue is pure OS config using "diskpart", "bootsect" and "bootrec" from the Win8 DVD. The old system disk still boots but I don't know enough to figure what to fix, to make the system boot as I want. The answers probably aren't hard but the real issue is my confusion and missing information. Thanks for helping!

    Read the article

  • CPU overheating after cleaning it

    - by Roberts
    I wanted to clean my computer CPU heatsink and fan itself, because the temperature is not what I wanted. About (50C ~ 70C). I have Intel Core 2 Duo E4300 @1.8 GHz (LGA775). The heatsink wasn't so scary filled with dust but I wanted to clean it anyway. I didn't know how to get heatsink with fan from the socket. So after 25 minutes I've figured it out. But I didn't know how to get it back on so I spent a lot time getting out the motherboard from the case. The fan and heatsink... The case and all components are clear of dust. (I'm tired now). Then I put all back just the way it was, well did few things on cable management. But the problem was that I didn't know how to connect front audio connectors. I had Windows XP hibernated. So I started the PC and everything was normal, except CMOS memory was clear. I configured the BIOS just the way it was and while I was doing that I saw about 58C CPU temperature and fan at 1789 RPM. Restarted the computer with new settings applied. But Windows halted with Blue Screen (I forgot what error it was but something with KERNEL). Restarted the PC and deleted hibernation session and everything was back normal. But couldn't record any sound from front panel microphone. The problem was that I messed ground wire with mic. Again after fixing it I turned computer on. No problems. The fan currently is noisy and temperature was 78C. The temperature before was 55C - 60C at idle. Now it's about 60C. If I do something then temperature raises to 79C. While speaking in skype the temperature was 82C. Could this problem occur because of the thermal grease (it's old and never replaced)? Edit The problem wasn't in thermal paste (because I didn't touch it). The problem was that I installed heatsink wrong. Now instead of regular 60C CPU temperature the CPU is at 48C (cool).

    Read the article

  • Expectations for NTFS file recovery

    - by Fred Hamilton
    Yesterday I booted my XP system, and as I looked up a minute later I saw the light blue screen and tail-end of that pre-boot diskcheck Windows sometimes does if it finds an error (or was previously told to run a diskcheck drung the next boot). I didn't worry about it at the moment... But then I looked at my "scratch" disk, which was a 70% full, 750GB hard disk...and it now looks like it has been freshly formatted. It doesn't have a single file on it, just the hidden "System Volume Information" file and 750GB of freedom from data. I looked at some of the recovery tools from the Free NTFS partition recovery question and decided to try PC INSPECTOR™ File Recovery 4.x initially. It ran overnight and afterwards returned a list of thousands of files it could recover. The odd thing was that the filenames were lost, but the file extensions were not (WTF?). And all of the files were exactly 1,472kB in size. I recovered a dozen PDFs as a test, and 80% of them displayed OK despite being padded out to 1.5MB (though I assume any files 1472kB are hosed). My primary question is: Is this the best I can expect from any file recovery software when trying to recover NTFS files? Or is there perhaps something better out there? I assume this is as good as it gets, but wanted to check in with the experts first. Bonus questions: What might have happened to my drive? I didn't intentionally format it. I've never seen a disk error cause the drive to suddenly become a clean, reformatted drive. Could some malicious/confused software have told my PC to format my disk on reboot? Is that even a function Windows XP has? Why can the file extensions be recovered but not the filename? Does NTFS really treat them as separate entities? I thought I had 8.3 naming turned off, but maybe that had something to do with it. Or maybe it looks at the data in the file and guesses the extension?

    Read the article

  • Recover harddrive data

    - by gameshints
    I have a dell laptop that recently "died" (It would get the blue screen of death upon starting) and the hard drive would make a weird cyclic clicking noises. I wanted to see if I could use some tools on my linux machine to recover the data, so I plugged it into there. If I run "fdisk" I get: Disk /dev/sdb: 20.0 GB, 20003880960 bytes 64 heads, 32 sectors/track, 19077 cylinders Units = cylinders of 2048 * 512 = 1048576 bytes Disk identifier: 0x64651a0a Disk /dev/sdb doesn't contain a valid partition table Fine, the partition table is messed up. However if I run "testdisk" in attempt to fix the table, it freezes at this point, making the same cyclical clicking noises: Disk /dev/sdb - 20 GB / 18 GiB - CHS 19078 64 32 Analyse cylinder 158/19077: 00% I don't really care about the hard drive working again, and just the data, so I ran "gpart" to figure out where the partitions used to be. I got this: dev(/dev/sdb) mss(512) chs(19077/64/32)(LBA) #s(39069696) size(19077mb) * Warning: strange partition table magic 0x2A55. Primary partition(1) type: 222(0xDE)(UNKNOWN) size: 15mb #s(31429) s(63-31491) chs: (0/1/1)-(3/126/63)d (0/1/32)-(15/24/4)r hex: 00 01 01 00 DE 7E 3F 03 3F 00 00 00 C5 7A 00 00 Primary partition(2) type: 007(0x07)(OS/2 HPFS, NTFS, QNX or Advanced UNIX) (BOOT) size: 19021mb #s(38956987) s(31492-38988478) chs: (4/0/1)-(895/126/63)d (15/24/5)-(19037/21/31)r hex: 80 00 01 04 07 7E FF 7F 04 7B 00 00 BB 6F 52 02 So I tried to mount just to the old NTFS partition, but got an error: sudo mount -o loop,ro,offset=16123904 -t ntfs /dev/sdb /mnt/usb NTFS signature is missing. Ugh. Okay. But then I tried to get a raw data dump by running dd if=/dev/sdb of=/home/erik/brokenhd skip=31492 count=38956987 But the file got up to 59885568 bytes, and made the same cyclical clicking noises. Obviously there is a bad sector, but I don't know what to do about it! The data is still there... if I view that 57MB file in textpad... I can see raw data from files. How can I get my data back? Thanks for any suggestions, Solution: I was able to recover about 90% of my data: Froze harddrive in freezer Used Ddrescue to make a copy of the drive Since Ddrescue wasn't able to get enough of my drive to use testdisk to recover my partitions/file system, I ended up using photorec to recover most of my files

    Read the article

  • getView only shows Flagged Backgrounds for drawn Views, It does not show Flagged Background when scroll to view more items on list

    - by Leoa
    I am trying to create a listview that receives a flagged list of items to indicate a status to the user. I have been able to create the flag display by using a yellow background (see image at bottom). In Theory, the flagged list can have many flagged items in it. However in my app, only the first three flagged backgrounds are shown. I believe this is because they are initially drawn to the screen. The Flagged background that are not drawn initially to the screen do not show. I'd like to know how to get the remaining flags to show in the list. ListView Recycling: The backgrounds in the listView are being recycled in getView(). This recycling goes from position 0 to position 9. I have flags that need to match at positions 13, 14 and so on. Those positions are not being displayed. listView.getCheckedItemPositions() for multiple selections: This method will not work in my case because the user will not selected the flags. The flags are coming from the server. setNotifyOnChange() and/or public virtual void SetNotifyOnChange (bool notifyOnChange): I'm not adding new data to the list, so I don't see how this method would work for my program. Does this method communicate to getview when it is recycling data? I was unable to find an answer to this in my research. public void registerDataSetObserver: This may be overkill for my problem, but is it possible to have an observer object that keeps track of the all the positions in my items list and in my flag list no matter if the view is recycled and match them on the screen? Code: package com.convention.notification.app; import java.util.Iterator; import java.util.ArrayList; import java.util.List; import android.app.Activity; import android.content.Context; import android.graphics.Color; import android.os.Bundle; import android.text.Html; import android.util.Log; import android.view.LayoutInflater; import android.view.View; import android.view.ViewGroup; import android.view.ViewParent; import android.widget.AdapterView; import android.widget.ArrayAdapter; import android.widget.TextView; public class NewsRowAdapter extends ArrayAdapter<Item> { private Activity activity; private List<Item> items; private Item objBean; private int row; private List<Integer> disable; View view ; int disableView; public NewsRowAdapter(Activity act, int resource, List<Item> arrayList, List<Integer> disableList) { super(act, resource, arrayList); this.activity = act; this.row = resource; this.items = arrayList; this.disable=disableList; System.out.println("results of delete list a:"+disable.toString()); } public int getCount() { return items.size(); } public Item getItem(int position) { return items.get(position); } public long getItemId(int position) { return position; } @Override public int getItemViewType(int position) { for(int k =0;k < disable.size();k++){ if(position==disable.get(k)){ //System.out.println( "is "+position+" value of disable "+disable.get(k)); disableView=disable.get(k); //AdapterView.getItemAtPosition(position); } } return position; } @Override public View getView(final int position, View convertView, ViewGroup parent) { View view = convertView; ViewHolder holder; if (view == null) { LayoutInflater inflater = (LayoutInflater) activity.getSystemService(Context.LAYOUT_INFLATER_SERVICE); view = inflater.inflate(row, null); getItemViewType(position); long id=getItemId(position); if(position==disableView){ view.setBackgroundColor(Color.YELLOW); System.out.println(" background set to yellow at position "+position +" disableView is at "+disableView); }else{ view.setBackgroundColor(Color.WHITE); System.out.println(" background set to white at position "+position +" disableView is at "+disableView); } //ViewHolder is a custom class that gets TextViews by name: tvName, tvCity, tvBDate, tvGender, tvAge; holder = new ViewHolder(); /* setTag Sets the tag associated with this view. A tag can be used to * mark a view in its hierarchy and does not have to be unique * within the hierarchy. Tags can also be used to store data within * a view without resorting to another data structure. */ view.setTag(holder); } else { //the Object stored in this view as a tag holder = (ViewHolder) view.getTag(); } if ((items == null) || ((position + 1) > items.size())) return view; objBean = items.get(position); holder.tv_event_name = (TextView) view.findViewById(R.id.tv_event_name); holder.tv_event_date = (TextView) view.findViewById(R.id.tv_event_date); holder.tv_event_start = (TextView) view.findViewById(R.id.tv_event_start); holder.tv_event_end = (TextView) view.findViewById(R.id.tv_event_end); holder.tv_event_location = (TextView) view.findViewById(R.id.tv_event_location); if (holder.tv_event_name != null && null != objBean.getName() && objBean.getName().trim().length() > 0) { holder.tv_event_name.setText(Html.fromHtml(objBean.getName())); } if (holder.tv_event_date != null && null != objBean.getDate() && objBean.getDate().trim().length() > 0) { holder.tv_event_date.setText(Html.fromHtml(objBean.getDate())); } if (holder.tv_event_start != null && null != objBean.getStartTime() && objBean.getStartTime().trim().length() > 0) { holder.tv_event_start.setText(Html.fromHtml(objBean.getStartTime())); } if (holder.tv_event_end != null && null != objBean.getEndTime() && objBean.getEndTime().trim().length() > 0) { holder.tv_event_end.setText(Html.fromHtml(objBean.getEndTime())); } if (holder.tv_event_location != null && null != objBean.getLocation () && objBean.getLocation ().trim().length() > 0) { holder.tv_event_location.setText(Html.fromHtml(objBean.getLocation ())); } return view; } public class ViewHolder { public TextView tv_event_name, tv_event_date, tv_event_start, tv_event_end, tv_event_location /*tv_event_delete_flag*/; } } Logcat: 06-12 20:54:12.058: I/System.out(493): item disalbed is at postion :0 06-12 20:54:12.058: I/System.out(493): item disalbed is at postion :4 06-12 20:54:12.069: I/System.out(493): item disalbed is at postion :5 06-12 20:54:12.069: I/System.out(493): item disalbed is at postion :13 06-12 20:54:12.069: I/System.out(493): item disalbed is at postion :14 06-12 20:54:12.069: I/System.out(493): item disalbed is at postion :17 06-12 20:54:12.069: I/System.out(493): results of delete list :[0, 4, 5, 13, 14, 17] 06-12 20:54:12.069: I/System.out(493): results of delete list a:[0, 4, 5, 13, 14, 17] 06-12 20:54:12.069: I/System.out(493): set adapaer to list view called; 06-12 20:54:12.128: I/System.out(493): background set to yellow at position 0 disableView is at 0 06-12 20:54:12.628: I/System.out(493): background set to white at position 1 disableView is at 0 06-12 20:54:12.678: I/System.out(493): background set to white at position 2 disableView is at 0 06-12 20:54:12.708: I/System.out(493): background set to white at position 3 disableView is at 0 06-12 20:54:12.738: I/System.out(493): background set to yellow at position 4 disableView is at 4 06-12 20:54:12.778: I/System.out(493): background set to yellow at position 5 disableView is at 5 06-12 20:54:12.808: I/System.out(493): background set to white at position 6 disableView is at 5 06-12 20:54:12.838: I/System.out(493): background set to white at position 7 disableView is at 5 This is a link to my first question a day ago: Change Background on a specific row based on a condition in Custom Adapter I appreciate your help!

    Read the article

  • org.apache.http.conn.HttpHostConnectException:Connection to http://172.20.38.143 refused

    - by Passion
    I have developed client server Application .I am accessing mysql with php running on my machine and client running on my cell which is connected to machine.WI-FI is also switched ON. Internet Permission are also added in Manifest file but then also the i encounter error 172.20.38.143 is IP OF MY MACHINE 06-01 13:20:10.391: W/System.err(11157): org.apache.http.conn.HttpHostConnectException: Connection to http://172.20.38.143 refused 06-01 13:20:10.401: W/System.err(11157): at org.apache.http.impl.conn.DefaultClientConnectionOperator.openConnection(DefaultClientConnectionOperator.java:183) 06-01 13:20:10.401: W/System.err(11157): at org.apache.http.impl.conn.AbstractPoolEntry.open(AbstractPoolEntry.java:164) 06-01 13:20:10.401: W/System.err(11157): at org.apache.http.impl.conn.AbstractPooledConnAdapter.open(AbstractPooledConnAdapter.java:119) 06-01 13:20:10.401: W/System.err(11157): at org.apache.http.impl.client.DefaultRequestDirector.execute(DefaultRequestDirector.java:360) 06-01 13:20:10.401: W/System.err(11157): at org.apache.http.impl.client.AbstractHttpClient.execute(AbstractHttpClient.java:674) 06-01 13:20:10.401: W/System.err(11157): at org.apache.http.impl.client.AbstractHttpClient.execute(AbstractHttpClient.java:511) 06-01 13:20:10.401: W/System.err(11157): at org.apache.http.impl.client.AbstractHttpClient.execute(AbstractHttpClient.java:489) 06-01 13:20:10.401: W/System.err(11157): at nineandroid.net.example.library.JSONParser.getJSONFromUrl(JSONParser.java:42) 06-01 13:20:10.401: W/System.err(11157): at nineandroid.net.example.library.UserFunctions.registerUser(UserFunctions.java:59) 06-01 13:20:10.401: W/System.err(11157): at nineandroid.net.example.RegisterActivity$1.onClick(RegisterActivity.java:52) 06-01 13:20:10.411: W/System.err(11157): at android.view.View.performClick(View.java:3567) 06-01 13:20:10.411: W/System.err(11157): at android.view.View$PerformClick.run(View.java:14224) 06-01 13:20:10.411: W/System.err(11157): at android.os.Handler.handleCallback(Handler.java:605) 06-01 13:20:10.411: W/System.err(11157): at android.os.Handler.dispatchMessage(Handler.java:92) 06-01 13:20:10.411: W/System.err(11157): at android.os.Looper.loop(Looper.java:137) 06-01 13:20:10.411: W/System.err(11157): at android.app.ActivityThread.main(ActivityThread.java:4517) 06-01 13:20:10.411: W/System.err(11157): at java.lang.reflect.Method.invokeNative(Native Method) 06-01 13:20:10.411: W/System.err(11157): at java.lang.reflect.Method.invoke(Method.java:511) 06-01 13:20:10.411: W/System.err(11157): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:993) 06-01 13:20:10.421: W/System.err(11157): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:760) 06-01 13:20:10.421: W/System.err(11157): at dalvik.system.NativeStart.main(Native Method) 06-01 13:20:10.421: W/System.err(11157): Caused by: java.net.ConnectException: failed to connect to /172.20.38.143 (port 80): connect failed: ENETUNREACH (Network is unreachable) 06-01 13:20:10.431: W/System.err(11157): at libcore.io.IoBridge.connect(IoBridge.java:114) 06-01 13:20:10.431: W/System.err(11157): at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:192) 06-01 13:20:10.431: W/System.err(11157): at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:459) 06-01 13:20:10.431: W/System.err(11157): at java.net.Socket.connect(Socket.java:848) 06-01 13:20:10.431: W/System.err(11157): at org.apache.http.conn.scheme.PlainSocketFactory.connectSocket(PlainSocketFactory.java:119) 06-01 13:20:10.431: W/System.err(11157): at org.apache.http.impl.conn.DefaultClientConnectionOperator.openConnection(DefaultClientConnectionOperator.java:144) 06-01 13:20:10.431: W/System.err(11157): ... 20 more 06-01 13:20:10.431: W/System.err(11157): Caused by: libcore.io.ErrnoException: connect failed: ENETUNREACH (Network is unreachable) 06-01 13:20:10.441: W/System.err(11157): at libcore.io.Posix.connect(Native Method) 06-01 13:20:10.441: W/System.err(11157): at libcore.io.BlockGuardOs.connect(BlockGuardOs.java:85) 06-01 13:20:10.441: W/System.err(11157): at libcore.io.IoBridge.connectErrno(IoBridge.java:127) 06-01 13:20:10.441: W/System.err(11157): at libcore.io.IoBridge.connect(IoBridge.java:112) 06-01 13:20:10.441: W/System.err(11157): ... 25 more 06-01 13:20:10.441: E/Buffer Error(11157): Error converting result java.lang.NullPointerException 06-01 13:20:10.451: E/JSON Parser(11157): Error parsing data org.json.JSONException: End of input at character 0 of 06-01 13:20:10.451: D/AndroidRuntime(11157): Shutting down VM 06-01 13:20:10.451: W/dalvikvm(11157): threadid=1: thread exiting with uncaught exception (group=0x40c0aa68) 06-01 13:20:10.451: E/AndroidRuntime(11157): FATAL EXCEPTION: main 06-01 13:20:10.451: E/AndroidRuntime(11157): java.lang.NullPointerException 06-01 13:20:10.451: E/AndroidRuntime(11157): at nineandroid.net.example.RegisterActivity$1.onClick(RegisterActivity.java:56) 06-01 13:20:10.451: E/AndroidRuntime(11157): at android.view.View.performClick(View.java:3567) 06-01 13:20:10.451: E/AndroidRuntime(11157): at android.view.View$PerformClick.run(View.java:14224) 06-01 13:20:10.451: E/AndroidRuntime(11157): at android.os.Handler.handleCallback(Handler.java:605) 06-01 13:20:10.451: E/AndroidRuntime(11157): at android.os.Handler.dispatchMessage(Handler.java:92) 06-01 13:20:10.451: E/AndroidRuntime(11157): at android.os.Looper.loop(Looper.java:137) 06-01 13:20:10.451: E/AndroidRuntime(11157): at android.app.ActivityThread.main(ActivityThread.java:4517) 06-01 13:20:10.451: E/AndroidRuntime(11157): at java.lang.reflect.Method.invokeNative(Native Method) 06-01 13:20:10.451: E/AndroidRuntime(11157): at java.lang.reflect.Method.invoke(Method.java:511) 06-01 13:20:10.451: E/AndroidRuntime(11157): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:993) 06-01 13:20:10.451: E/AndroidRuntime(11157): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:760) 06-01 13:20:10.451: E/AndroidRuntime(11157): at dalvik.system.NativeStart.main(Native Method) UserFunctions.java to call jsonParser public class UserFunctions { private JSONParser jsonParser; private static String loginURL = "http://172.20.38.143/ah_login_api/"; private static String registerURL = "http://172.20.38.143/ah_login_api/"; private static String login_tag = "login"; private static String register_tag = "register"; // constructor public UserFunctions(){ jsonParser = new JSONParser(); } /** * function make Login Request * @param email * @param password * */ public JSONObject loginUser(String email, String password){ // Building Parameters List<NameValuePair> params = new ArrayList<NameValuePair>(); params.add(new BasicNameValuePair("tag", login_tag)); params.add(new BasicNameValuePair("email", email)); params.add(new BasicNameValuePair("password", password)); JSONObject json = jsonParser.getJSONFromUrl(loginURL, params); // return json // Log.e("JSON", json.toString()); return json; } /** * function make Login Request * @param name * @param email * @param password * */ public JSONObject registerUser(String name, String email, String password){ // Building Parameters List<NameValuePair> params = new ArrayList<NameValuePair>(); params.add(new BasicNameValuePair("tag", register_tag)); params.add(new BasicNameValuePair("name", name)); params.add(new BasicNameValuePair("email", email)); params.add(new BasicNameValuePair("password", password)); // getting JSON Object JSONObject json = jsonParser.getJSONFromUrl(registerURL, params); // return json return json; } /** * Function get Login status * */ public boolean isUserLoggedIn(Context context){ DatabaseHandler db = new DatabaseHandler(context); int count = db.getRowCount(); if(count > 0){ // user logged in return true; } return false; } /** * Function to logout user * Reset Database * */ public boolean logoutUser(Context context){ DatabaseHandler db = new DatabaseHandler(context); db.resetTables(); return true; } } jsonParser.java public class JSONParser { static InputStream is = null; static JSONObject jObj = null; static String json = ""; // constructor public JSONParser() { } public JSONObject getJSONFromUrl(String url, List<NameValuePair> params) { // Making HTTP request try { // defaultHttpClient DefaultHttpClient httpClient = new DefaultHttpClient(); HttpPost httpPost = new HttpPost(url); httpPost.setEntity(new UrlEncodedFormEntity(params)); HttpResponse httpResponse = httpClient.execute(httpPost); HttpEntity httpEntity = httpResponse.getEntity(); is = httpEntity.getContent(); } catch (UnsupportedEncodingException e) { e.printStackTrace(); } catch (ClientProtocolException e) { e.printStackTrace(); } catch (IOException e) { e.printStackTrace(); } try { BufferedReader reader = new BufferedReader(new InputStreamReader( is, "iso-8859-1"), 8); StringBuilder sb = new StringBuilder(); String line = null; while ((line = reader.readLine()) != null) { sb.append(line + "\n"); } is.close(); json = sb.toString(); Log.e("JSON", json); } catch (Exception e) { Log.e("Buffer Error", "Error converting result " + e.toString()); } // try parse the string to a JSON object try { jObj = new JSONObject(json); } catch (JSONException e) { Log.e("JSON Parser", "Error parsing data " + e.toString()); } // return JSON String return jObj; } } RegisterActivity.java public class RegisterActivity extends Activity { Button btnRegister; Button btnLinkToLogin; EditText inputFullName; EditText inputEmail; EditText inputPassword; TextView registerErrorMsg; // JSON Response node names private static String KEY_SUCCESS = "success"; private static String KEY_UID = "uid"; private static String KEY_NAME = "name"; private static String KEY_EMAIL = "email"; private static String KEY_CREATED_AT = "created_at"; @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.register); // Importing all assets like buttons, text fields inputFullName = (EditText) findViewById(R.id.registerName); inputEmail = (EditText) findViewById(R.id.registerEmail); inputPassword = (EditText) findViewById(R.id.registerPassword); btnRegister = (Button) findViewById(R.id.btnRegister); btnLinkToLogin = (Button) findViewById(R.id.btnLinkToLoginScreen); registerErrorMsg = (TextView) findViewById(R.id.register_error); // Register Button Click event btnRegister.setOnClickListener(new View.OnClickListener() { public void onClick(View view) { String name = inputFullName.getText().toString(); String email = inputEmail.getText().toString(); String password = inputPassword.getText().toString(); UserFunctions userFunction = new UserFunctions(); JSONObject json = userFunction.registerUser(name, email, password); // check for login response try { if (json.getString(KEY_SUCCESS) != null) { registerErrorMsg.setText(""); String res = json.getString(KEY_SUCCESS); if(Integer.parseInt(res) == 1){ // user successfully registred // Store user details in SQLite Database DatabaseHandler db = new DatabaseHandler(getApplicationContext()); JSONObject json_user = json.getJSONObject("user"); // Clear all previous data in database userFunction.logoutUser(getApplicationContext()); db.addUser(json_user.getString(KEY_NAME), json_user.getString(KEY_EMAIL), json.getString(KEY_UID), json_user.getString(KEY_CREATED_AT)); // Launch Dashboard Screen Intent dashboard = new Intent(getApplicationContext(), DashboardActivity.class); // Close all views before launching Dashboard dashboard.addFlags(Intent.FLAG_ACTIVITY_CLEAR_TOP); startActivity(dashboard); // Close Registration Screen finish(); }else{ // Error in registration registerErrorMsg.setText("Error occured in registration"); } } } catch (JSONException e) { e.printStackTrace(); } } }); // Link to Login Screen btnLinkToLogin.setOnClickListener(new View.OnClickListener() { public void onClick(View view) { Intent i = new Intent(getApplicationContext(), LoginActivity.class); startActivity(i); // Close Registration View finish(); } }); } }

    Read the article

  • while I scroll between the layout it takes too long to be able to scroll between the gallerie's pictures. Is there any way to reduce this time?

    - by Mateo
    Hello, this is my first question here, though I've being reading this forum for quite a while. Most of the answers to my doubts are from here :) Getting back on topic. I'm developing an Android application. I'm drawing a dynamic layout that are basically Galleries, inside a LinearLayout, inside a ScrollView, inside a RelativeLayout. The ScrollView is a must, because I'm drawing a dynamic amount of galleries that most probably will not fit on the screen. When I scroll inside the layout, I have to wait 3/4 seconds until the ScrollView "deactivates" to be able to scroll inside the galleries. What I want to do is to reduce this time to a minimum. Preferably I would like to be able to scroll inside the galleries as soon as I lift my finger from the screen, though anything lower than 2 seconds would be great as well. I've being googling around for a solution but all I could find until now where layout tutorials that didn't tackle this particular issue. I was hoping someone here knows if this is possible and if so to give me some hints on how to do so. I would prefer not to do my own ScrollView to solve this. But if that is the only way I would appreciate some help because I'm not really sure how would I solve this issue by doing that. this is my layout: public class PicturesL extends Activity implements OnClickListener, OnItemClickListener, OnItemLongClickListener { private ArrayList<ImageView> imageView = new ArrayList<ImageView>(); private StringBuilder PicsDate = new StringBuilder(); private CaWaApplication application; private long ListID; private ArrayList<Gallery> gallery = new ArrayList<Gallery>(); private ArrayList<Bitmap> Thumbails = new ArrayList<Bitmap>(); private String idioma; private ArrayList<Long> Days = new ArrayList<Long>(); private long oldDay; private long oldThumbsLoaded; private ArrayList<Long> ThumbailsDays = new ArrayList<Long>(); private ArrayList<ArrayList<Long>> IDs = new ArrayList<ArrayList<Long>>(); @Override public void onCreate(Bundle savedInstancedState) { super.onCreate(savedInstancedState); RelativeLayout layout = new RelativeLayout(this); ScrollView scroll = new ScrollView(this); LinearLayout realLayout = new LinearLayout(this); ArrayList<TextView> texts = new ArrayList<TextView>(); Button TakePic = new Button(this); idioma = com.mateloft.cawa.prefs.getLang(this); if (idioma.equals("en")) { TakePic.setText("Take Picture"); } else if (idioma.equals("es")) { TakePic.setText("Sacar Foto"); } RelativeLayout.LayoutParams scrollLP = new RelativeLayout.LayoutParams(RelativeLayout.LayoutParams.FILL_PARENT, RelativeLayout.LayoutParams.FILL_PARENT); layout.addView(scroll, scrollLP); realLayout.setOrientation(LinearLayout.VERTICAL); realLayout.setLayoutParams(new LayoutParams(LayoutParams.FILL_PARENT, LayoutParams.FILL_PARENT)); scroll.addView(realLayout); TakePic.setId(67); TakePic.setOnClickListener(this); application = (CaWaApplication) getApplication(); ListID = getIntent().getExtras().getLong("listid"); getAllThumbailsOfID(); LinearLayout.LayoutParams TakeLP = new LinearLayout.LayoutParams(LinearLayout.LayoutParams.WRAP_CONTENT, LinearLayout.LayoutParams.WRAP_CONTENT); realLayout.addView(TakePic); oldThumbsLoaded = 0; int galler = 100; for (int z = 0; z < Days.size(); z++) { ThumbailsManager croppedThumbs = new ThumbailsManager(Thumbails, oldThumbsLoaded, ThumbailsDays.get(z)); oldThumbsLoaded = ThumbailsDays.get(z); texts.add(new TextView(this)); texts.get(z).setText("Day " + Days.get(z).toString()); gallery.add(new Gallery(this)); gallery.get(z).setAdapter(new ImageAdapter(this, croppedThumbs.getGallery(), 250, 175, true, ListID)); gallery.get(z).setOnItemClickListener(this); gallery.get(z).setOnItemLongClickListener(this); gallery.get(z).setId(galler); galler++; realLayout.addView(texts.get(z)); realLayout.addView(gallery.get(z)); } Log.d("PicturesL", "ListID: " + ListID); setContentView(layout); } private void getAllThumbailsOfID() { ArrayList<ModelPics> Pictures = new ArrayList<ModelPics>(); ArrayList<String> ThumbailsPath = new ArrayList<String>(); Pictures = application.dataManager.selectAllPics(); long thumbpathloaded = 0; int currentID = 0; for (int x = 0; x < Pictures.size(); x++) { if (Pictures.get(x).walkname == ListID) { if (Days.size() == 0) { Days.add(Pictures.get(x).day); oldDay = Pictures.get(x).day; IDs.add(new ArrayList<Long>()); currentID = 0; } if (oldDay != Pictures.get(x).day) { oldDay = Pictures.get(x).day; ThumbailsDays.add(thumbpathloaded); Days.add(Pictures.get(x).day); IDs.add(new ArrayList<Long>()); currentID++; } StringBuilder tpath = new StringBuilder(); tpath.append(Pictures.get(x).path.substring(0, Pictures.get(x).path.length() - 4)); tpath.append("-t.jpg"); IDs.get(currentID).add(Pictures.get(x).id); ThumbailsPath.add(tpath.toString()); thumbpathloaded++; if (x == Pictures.size() - 1) { Log.d("PicturesL", "El ultimo de los arrays, tamaño: " + Days.size()); ThumbailsDays.add(thumbpathloaded); } } } for (int y = 0; y < ThumbailsPath.size(); y++) { Thumbails.add(BitmapFactory.decodeFile(ThumbailsPath.get(y))); } } I had a memory leak on another activity when screen orientation changed that was making it slower, now it is working better. The scroller is not locking up. But sometimes, when it stops scrolling, it takes a few seconds (2/3) to disable itself. I just want it to be a little more dynamic, is there any way to override the listener and make it stop scrolling ON_ACTION_UP or something like that? I don't want to use the listview because I want to have each gallery separated by other views, now I just have text, but I will probably separate them with images with a different size than the galleries. I'm not really sure if this is possible with a listadapter and a listview, I assumed that a view can only handle only one type of object, so I'm using a scrollview of a layout, if I'm wrong please correct me :) Also this activity works as a preview or selecting the pictures you want to view in full size and manage their values. So its working only with thumbnails. Each one weights 40 kb. Guessing that is very unlikely that a user gets more than 1000~1500 pictures in this view, i thought that the activity wouldn't use more than 40~50 mb of ram in this case, adding 10 more if I open the fullsized view. So I guessed as well most devices are able to display this view in full size. If it doesn't work on low-end devices my plan was to add an option in the app preferences to let user chop this view according to some database values. And a last reason is that during most of this activity "life-cycle" (the app has pics that are relevant to the view, when it ends the value that selects which pictures are displayed has to change and no more pictures are added inside this instance of this activity); the view will be unpopulated, so most of the time showing everything wont cost much, just at the end of its cycle That was more or less what I thought at the time i created this layout. I'm open to any sort of suggestion or opinion, I just created this layout a few days ago and I'm trying to see if it can work right, because it suits my app needs. Though if there is a better way i would love to hear it Thanks Mateo

    Read the article

  • How do Windows 7 encrypted files look like?

    - by Sean Farrell
    Ok this is kind of an odd question: How do Windows 7 (Home Premium) encrypted files look like "from the outside"? Now here is the story. An acquaintance of a freind of mine got a nasty virus / scareware. So I wiped out my PC technician cap and went to work on it. What I did was remove the drive from the laptop and put drive into my external drive bay. I scanned the drive and yes it was loaded with stuff. That basically cured the infection and I could start the system back up. To check if it cured the problem I wanted to see the system while running. There where two user accounts, on with a password and one without (both admin users !?!). So I logged into the unprotected user and cleaned up the residual issues, like proxy server to localhost in the browser config. Now I wanted to do the same for the password protected user. What I noticed that from my system and the unprotected user account the files of the protected user looked garbled. The files are something like 12 random alphanum chars, but the folders looked ok. Naive as was thought this might be how encrypted files looked "from the outside". (I never use Microsoft's own security features, so how would I know. TrueCrypt is one big blob.) Since the second user could not be reached, I though sod it and removed the password from the account. (That might have been a mistake, I know.) Now I did the same clean up tasks and all nice and fine; except for the files which where still "encrypted". So I looked into many Windows Encrypted Files recovery posts and not all hope is lost, since I should be able to extract the certificate and with the password regain access to the files. Also note that windows did "only" prompt me that removing the password would be insecure, not that access to encrypted files would be lost, like it is claimed in most recovery articles. Resetting the password did not help and I gave up for the night. The question that nagged me half of the last night was, what if the files are not encrypted, but the scare-ware encrypted / destroyed the files? I don't want to spend hours of work trying to recover files that are not recoverable. The ting is that the user does not remember turning it on and aren't the files marked in blue and the filename is readable? Many thanks for input from users who have more knowledge about WEF...

    Read the article

  • How should I use my new SSD drive?

    - by jasondavis
    I just built a new PC the other day. Specs... Processor: Intel i7-930 quad core CPU CPU Cooler: COOLER MASTER Hyper 212 Motherboard: AsRock X58 Extreme 3 RAM/Memory: 6gb G-Skill tripple channel DDR3 memory (3 sticks of 2gb planning to get another kit to make it 12gb total soon) Operating System Hard drive: Intel X25-M 80GB Mainstream SATA2 Solid State Drive Video Cards: 2 XFX ATI Redeon HD 4650 cards to run 3-4 monitors Case: Lian Li PC-B10 Midtower case Power Supply: Antec TruePower New TP-750 Blue 750W Operating System Windows 7 Pro 64bit Not sure if the specs are helpful at all but I posted them just in case. So I got everything put together and running great so far but I need some advice/ideas/help/tips. I got the SSD drive in hopes of using it strictly for my windows 7 install along with all my other programs I install. I am then going to get another drive or 2 just for data (video,music,photos, etc). So my plan is to just install the new data drives and then in windows 7 I will change my "My documents" "My Music" "My Video" "MY Photos" library's to be located on the data drives instead of the OS SSD drive. I would ultimately like to install all my programs with my windows install on the SSD drive and then create an IMAGE of the drive and then 6 months down the road if things are sluggish I can just wipe the drive and restore my IMAGE with all my programs and settings in tact still. So here are some questions now. 1) How can I verify that TRIM is working on my new SSD? 2) Is there anything above that I missed that I should be doing? I think I once read that there is a page file or some sort of file that windows changes a lot and that it should be moved off f an SSD an onto my data drives. DOes anyone know what I might of heard? If you do can you explain the pros and cons of doing such a thing as well as how to possibly? 3) Any tips or advice to get the best performance from all this, I built a pretty nice system and I just want to make it stay that way as long as I can.

    Read the article

  • Recognizing Dell EquilLogic with Nagios

    - by user3677595
    EDIT: All firmware and models are compatible, that is why nothing is posted about it. Okay, so there will be a lot here, so please bare with me. I've been working on this now for a few hours (reading manuals and such) so I'm not just coming here right out of the blue. I am working on a PRE-EXISTING Nagios server where there are several other existing plugins and checks running and working. Now I want to add another server there to check so I made the following modifications: First and foremost, I added a file to /usr/local/nagios/libexec named: check_equallogic.sh. The permissions are 755, the same as all others. I have chowned to nagios:nagios and in the listing it shows the Owner as Nagios. I then added a command to the commands.cfg file in \usr\local\nagios\etc\objects that shows the following: # 'check_equallogic' command definition define command{ command_name check_equallogic command_line $USER1$/check_equallogic -H $HOSTADDRESS$ -C $ARG1$ -t $ARG2$ $ARG3$ } Following this, I created a file named equallogic.cfg in the objects directory and it contains (more or less): define host{ use linux-server ; Inherit default values from a template host_name 172.16.50.11 ; The name we're giving to this device alias EqualLogic ; A longer name associated with the device address 172.16.50.11 ; IP address of the device contact_groups admins } Check Equallogic Information define service{ use generic-service host_name 172.16.50.11 service_description General Information check_command check_equallogic!public!info } After ensuring that permissions are okay for all files, I restart the nagios service, no errors. When I go into the WebGUI, I get the following errors AFTER the check runs: (Return code of 127 is out of bounds - plugin may be missing) Extra, probably unrelated problem Furthermore, when I log into the EquilLogic server, under Audit logs I get the following error: Level: AUDIT Time: 26/05/2014 3:59:13 PM Member: ps4100-1 Subsystem: agent Event ID: 22.7.1 SNMP packet validation failed, request received from 172.16.10.11 An snmpwalk receives a timeout, whereas others succeed. I will work on importing the MIBs tomorrow. The reason why I am mentioning it is because I want to make sure that it is only a MIB issue for the SNMP. If it is, then ignore this area. I am entirely unsure of what to do here.

    Read the article

  • Alienware m15x (older model) BSOD investigation

    - by Crishu
    A frined of mine asked me to help him with an Alienware m15x laptop that had a little service history. It was bought in june 2008, serviced in january 2009 for a random fps drop problem, Alienware returned it saying nothing was wrong. The laptop still had hiccups, but after juggling a few drivers and settings, the fps drops weren't as noticeable. Eventually it died in Sept. 2009. It would not boot up locking itself on a white/gray screen. (i think it was overheating .. clocking in 100 degrees Celsius). So back to Alienware it went. They replaced the GPU and all was fine. Up until these blue screens started showing up. One other thing that was updated was the HDD and a Windows 7 reinstall, in August. From then on it seems to have started its BSOD. Could this be the culprit? Why? 0_o The original Windows was Vista but it was upgraded with a digital download/purchase of Windows 7 Home Premium and activated after installing windows. No errors on the old HDD, just on the latest installation. LE:Due note that now the old HDD is used to see if issues re-occur. So please, I am in need of someone who can interpret these windows dump files: Minidump I may have come to some conflicting conclusions. So if someone can clarify each dump/date and the probable cause/error it had; and a final conclusion or solution, we would be very grateful. Also please consult report for other system info I omitted: same link,code: XRWIVLWG If I missed something or if you have any other questions I'll be happy to answer them. Thank you. Good day. Processor: Intel(R) Core(TM)2 Duo CPU T9300 @ 2.50GHz Network Adapter Properties: Broadcom NetLink (TM) Gigabit Ethernet Intel(R) Wireless WiFi Link 4965AGN Video Adapter Properties: Driver Description NVIDIA GeForce 8800M GTX Driver Date 19.08.2009 Driver Version 8.16.11.8681 Driver Provider NVIDIA INF File oem19.inf Hardware ID PCI\VEN_10DE&DEV_060C&SUBSYS_0770152D&REV_A2 Location Information @system32\DRIVERS\pci.sys,#65536;PCI bus %1, device %2, function %3;(1,0,0) PCI Device NVIDIA GeForce 8800M GTX [NoDB] BIOS String Version 62.92.34.0.8 Installed Drivers nvd3dum (8.16.11.8681), nvwgf2um, nvwgf2um Hard Dik Drive: Model ID ST9120823ASG (**older one 120gb**) Model ID WD32000BEKT (new 320gb with fresh OS)

    Read the article

  • JQuery dynamic .load - works for 1 and not for the other??

    - by Alvin
    UPDATE: Site is online http://qwickqual.com/memorial/create/ under "Memoria Media" - Click on "Our Videos" and it loads the list of categories click on any sub category and it goes through the process below ---------------- end edit ---------------------------------- UPDATED DESCRIPTION OF ERROR: All code is based on <li> objects being linked If I click on an <li> from the Initial page load to load: section 1: I can click on an <li> to load sub-categories section 2: I then click on an <li>, the query is made server returns section 3, section is not loaded to screen / and callback function is skipped over perhaps someone has run into a similar issue before?? ---------------- end edit ---------------------------------- I've also added comments to the code I have a jquery function that is setup to load categorized lists of thumbnails. So far the function is in use in 3 location. Each of them generates HTML using the same template under django. The function works perfectly in 2 of the 3 locations, and I"m plain stumped as to why the 3rd won't work. Below is the complete set of relevant javascript, the page load HTML for the relevant section. And 2 examples of HTML that is loaded through the script, 1 of them works, 1 of them doesn't and both are loaded into the same page load HTML Any ideas what I'm missing here? Or information I need to add to help debug? Currently posting this to a live server to interact with, been local only till now... Error: Script works properly through all levels of title="our_photos" Script loads 1st level of title="our_videos" Script will not load sub-category of title="our_videos" Example: From HTML below: Click on Script will query the server properly: GET http://localhost%3A8000/memorial/media%5Ftype/our%5Fvideos/4/ Script will not load the returned HTML into the #select_media div scopeChain: [Call, Call multi=false uri=/memorial/media_type/our_videos/, Window # 0=Call 1=Call 2=window] relative vars: label = "our_videos" wrapper = "media" uri = "/memorial/media_type/our_videos/" multi = false Javascript <script type="text/javascript"> // this piece is where I'm having trouble in the grand scheme of things // label = piece of class tag // wrapper = tag to load everything inside of // uri = base of the page to load // multi = not relevant for this piece but needed to pass on to next function function img_thumb_loader(label, wrapper, uri, multi) { if(!(wrapper)) { wrapper = label } $('.'+label+'_category').click(function () { // show the loading animation $('div#'+wrapper+'_load').show(); // get var of current object type = $(this).attr('title') || ''; // load it into the screen - this is the error // when I click on an <li> from section 2 below it will query server // (Tamper data & server see it - & return section 3 below // But will not load into the screen on return // also skips over the callback function $('#select_'+label).load(uri+type+'/', '', function() { $('div#'+wrapper+'_load').hide(); $('input.img_'+label+'_field').each(function() { img = $(this).attr('value'); $('li#img_'+label+'-'+img).css('selected_thumb'); }); img_thumb_selected(label); window[label+'_loader'](); }); }); $('.img_'+label).click(function () { if($(this).hasClass('selected_thumb')) { $(this).removeClass('selected_thumb'); id = $(this).attr('title'); $('.img_'+label+'_selected[value="'+id+'"]').remove(); } else { if(!(multi)) { previous = $('.img_'+label+'_selected').val(); $('#img_'+label+'-'+previous).removeClass('selected_thumb'); $('.img_'+label+'_selected').remove(); } $(this).addClass('selected_thumb'); id = $(this).attr('title'); $('#select_'+wrapper).after('<input class="img_'+label+'_selected" id="img_'+label+'_field-'+id+'" type="hidden" name="imgs[]" value="'+id+'" />'); } }); img_thumb_selected(label); } function img_thumb_selected(label) { $('.img_'+label+'_selected').each(function() { current = $(this).val(); if(current) { $('#img_'+label+'-'+current).addClass('selected_thumb'); } }); } function media_type() { $('.media_type').click(function () { $('#media_load').show(); type = $(this).attr('title') || ''; $('#select_media').load('/memorial/media_type/'+type+'/', '', function() { $('#select_media').wrapInner('<div id="select_'+type+'"></div>'); $('#select_media').append('<ul class="root_link"><h3><a class="load_media" onclick="return false;" href="#">Return to Select Media Type</a></h3></ul>'); load_media_type(); $('#media_load').hide(); window[type+'_loader'](); }); }); } media_type(); function load_media_type() { $('.load_media').click(function () { $('#media_load').show(); $('#select_media').load('{% url mem_media_type %}', '', function() { $('#media_load').hide(); media_type(); }); }); } function our_photos_loader() { img_thumb_loader('our_photos', 'media', '{% url mem_our_photos %}', true); } function our_videos_loader() { img_thumb_loader('our_videos', 'media', '{% url mem_our_videos %}', false); } </script> HTML - Initial Page load <fieldset> <legend>Memorial Media</legend> <div style="display: none;" id="media_load" class="loading"/> <div id="select_media"> <ul style="width: 528px;" class="initial"> <li title="your_photos" class="media_type"><div class="photo_select_upload"><h3>Your Photos</h3></div></li> <li title="our_photos" class="media_type"><div class="photo_select"><h3>Our Photos</h3></div></li> <li title="our_videos" class="media_type"><div class="video_select"><h3>Our Videos</h3></div></li> </ul> </div> </fieldset> HTML - Returned from Click on section 1 this section can make calls to subcategories and it will work <br class="clear" /> <ul class="thumb_sub_category" style="width: 352px;"> <li id="our_photos_category-29" class="our_photos_category" title="29"> <div> <span style="background-image: url(/site_media/photologue/photos/cache/stuff_004_thumbnail.jpg);" class="thumb"><span></span></span> <p>Birds 1</p> </div> </li> <li id="our_photos_category-25" class="our_photos_category" title="25"> <div> <span style="background-image: url(/site_media/photologue/photos/cache/dsc_0035_thumbnail.jpg);" class="thumb"><span></span></span> <p>Dogs 1</p> </div> </li> </ul> HTML - Returned from click on Section 2 Having trouble with sub-categories from this area <br class="clear" /> <ul class="thumb_sub_category" style="width: 528px;"> <li id="our_videos_category-1" class="our_videos_category" title="1"> <div> <span style="background-image: url(/site_media/photologue/photos/cache/forest-1_thumbnail.jpg);" class="thumb"><span></span></span> <p>Video 1</p> </div> </li> <li id="our_videos_category-3" class="our_videos_category" title="3"> <div> <span style="background-image: url(/site_media/photologue/photos/cache/mountain-1_thumbnail.jpg);" class="thumb"><span></span></span> <p>Video 3</p> </div> </li> <li id="our_videos_category-4" class="our_videos_category" title="4"> <div> <span style="background-image: url(/site_media/photologue/photos/cache/mountain-3_thumbnail.jpg);" class="thumb"><span></span></span> <p>Video 4</p> </div> </li> </ul> HTML that fails to load inside - Section 3 <br class="clear" /> <ul class="thumb_sub_category" style="width: 528px;"> <li id="our_videos_category-1" class="our_videos_category" title="1"> <div> <span style="background-image: url(/site_media/photologue/photos/cache/forest-1_thumbnail.jpg);" class="thumb"><span></span></span> <p>Video 1</p> </div> </li> <li id="our_videos_category-3" class="our_videos_category" title="3"> <div> <span style="background-image: url(/site_media/photologue/photos/cache/mountain-1_thumbnail.jpg);" class="thumb"><span></span></span> <p>Video 3</p> </div> </li> <li id="our_videos_category-4" class="our_videos_category" title="4"> <div> <span style="background-image: url(/site_media/photologue/photos/cache/mountain-3_thumbnail.jpg);" class="thumb"><span></span></span> <p>Video 4</p> </div> </li> </ul>

    Read the article

  • How to install RAID drivers on already installed Windows 7?

    - by happysencha
    64-bit Windows 7 Ultimate 6GB RAM Intel i7 920 Intel X25-M SSD 80GB 2,5" Club 3D Radeon HD5750 GA-EX58-UD4P Motherboard I've been running fine with Windows 7 installed on the SSD. I wanted to create an mirrored Raid-1 setup for backups using two hard disks, so I ordered two Samsung HD203WI. This motherboard supports two different RAID controllers, the Intel's ICH10R and Gigabyte's SATA2 SATA controller. There are 6 SATA ports behind the ICH10R and 2 SATA ports for the Gigabyte controller. I googled around and seemed that the ICH10R is a better choice and since then I've been trying to make it work. When I activate the [RAID] mode from BIOS, the Windows 7 gives BSOD exactly as described by this guy: "Windows 7 will start to boot, it gets to the screen where there are 4 colors coming together and it blue screens and restarts no matter what I do." First thing I did: turned off the RAID and booted to Windows and tried to install the SATA RAID drivers from Gigabyte. I launch the driver installation program and it gives "This computer does not meet the minimum requirements for installing the software" error. I then tried Intel's Rapid Storage Technology drivers (which apparently is the same as the one offered at Gigabyte's site), but it resulted in exactly the same error. I then detached the new Samsung hard disks from the SATA ports, but left the [RAID] enabled in BIOS. To my surprise, it still BSOD'd, so at this point I knew it is an OS/driver issue. Also, I tried with the Gigabyte's RAID enabled (while the ICH10R RAID disabled) and it booted just fine. So then I thought, that maybe I can't install the RAID drivers from within the OS. So I caused the BSOD on purpose once again, and then with ICH10R RAID activated and Samsung hard disks attached, I choose the Windows 7 Recovery mode in the boot menu. It sees some problem(s), tries to repair, does not succeed and does not ask for drivers (which I put on a USB stick) to install. I also tried to use the command-line in the recovery: "rundll32 syssetup, SetupInfObjectInstallAction DefaultInstall 128 iaStor.inf" but it gave "Installation failed." So I'm clueless how should I proceed. Do I really need to re-install Windows 7 and load RAID drivers in the Win7 setup? I don't want to install any OS on the RAID, the Windows 7 is and will be on the SSD. I just want to have a RAID-1 backup using those two hard disks. I mean why would I need to re-install operating system to add RAID setup?

    Read the article

  • Computer randomly reboots during "intensive activity".

    - by Reznor
    My friend has been playing games on his new build for some time now. However, lately, his computer will randomly reboot out of nowhere, so far only happening in game, and presumably only to happen in game as it happens nowhere else. This can happen in game during play or even in the options. Note, it isn't a crash or blue screen. It's just a normal reboot. This started today, I believe, and has only occured in two games: Dead Space and Stalker: Shadow of Chernobyl. He has played a handful of games before these, for about a week or so, without this problem. We theorized on two possibilities: Maybe something is overheating? Maybe the power supply is inadequate? These two were quickly dismissed, as all his components were operating at normal temperatures when he got back to his desktop from the reboot, and we all know these parts don't exactly cool down quickly, especially if they get hot enough to trigger a reboot. Besides, I know at-least my motherboard reports processor overheating at start-up, and requests I press f1 to continue into boot. The PSU one was dismissed too. He has an 850w power supply on a rig that was estimated to take only 720 some watts, that's with some overcompensating to be safe. He opened up his case to make sure nothing was seated wrong or in the way. All was fine, but he did notice a sticker on his video card. It had a giant barcode on it and some numbers. Now, I'm used to seeing these stickers, they're the warranty stickers, right, and removal voids the warranty? Yeah, well, we find it odd because this sticker is slapped right over the circuits of the video card, not on a block or anything. Is this normal? Should he remove it? Right now, I am concerned with the memory. Could that be at fault? Here are his specs: Windows 7 Home Premium, 64-Bit Intel i7 950 EVGA GeForce 570 GTX 4 GB DDR3 PC10666 dual-channel Corsair RAM Corsair 850w PSU Gigabyte GA-X58A-UD3R Western Digital 1 TB WD1001FALS

    Read the article

  • Why keylistener is not working here?

    - by swift
    i have implemented keylistener interface and implemented all the needed methods but when i press the key nothing happens here, why? package swing; import java.awt.Color; import java.awt.Dimension; import java.awt.Graphics; import java.awt.Graphics2D; import java.awt.GridLayout; import java.awt.Point; import java.awt.RenderingHints; import java.awt.event.ActionEvent; import java.awt.event.ActionListener; import java.awt.event.KeyEvent; import java.awt.event.KeyListener; import java.awt.event.MouseEvent; import java.awt.event.MouseListener; import java.awt.event.MouseMotionListener; import java.awt.event.WindowAdapter; import java.awt.event.WindowEvent; import java.awt.image.BufferedImage; import javax.swing.BorderFactory; import javax.swing.BoxLayout; import javax.swing.ImageIcon; import javax.swing.JButton; import javax.swing.JFrame; import javax.swing.JLayeredPane; import javax.swing.JPanel; import javax.swing.JTextArea; class Paper extends JPanel implements MouseListener,MouseMotionListener,ActionListener,KeyListener { static BufferedImage image; String shape; Color color=Color.black; Point start; Point end; Point mp; Button elipse=new Button("elipse"); int x[]=new int[50]; int y[]=new int[50]; Button rectangle=new Button("rect"); Button line=new Button("line"); Button roundrect=new Button("roundrect"); Button polygon=new Button("poly"); Button text=new Button("text"); ImageIcon erasericon=new ImageIcon("images/eraser.gif"); JButton erase=new JButton(erasericon); JButton[] colourbutton=new JButton[9]; String selected; Point label; String key; int ex,ey;//eraser //DatagramSocket dataSocket; JButton button = new JButton("test"); JLayeredPane layerpane; Point p=new Point(); int w,h; public Paper() { JFrame frame=new JFrame("Whiteboard"); frame.setVisible(true); frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE); frame.setSize(640, 480); frame.setBackground(Color.black); layerpane=frame.getLayeredPane(); setWidth(539,444); setBounds(69,0,555,444); layerpane.add(this,new Integer(2)); layerpane.add(this.addButtons(),new Integer(0)); setLayout(null); setOpaque(false); addMouseListener(this); addMouseMotionListener(this); setFocusable(true); addKeyListener(this); System.out.println(isFocusable()); setBorder(BorderFactory.createLineBorder(Color.black)); } public void paintComponent(Graphics g) { try { super.paintComponent(g); g.drawImage(image, 0, 0, this); Graphics2D g2 = (Graphics2D)g; if(color!=null) g2.setPaint(color); if(start!=null && end!=null) { if(selected==("elipse")) g2.drawOval(start.x, start.y,(end.x-start.x),(end.y-start.y)); else if(selected==("rect")) g2.drawRect(start.x, start.y, (end.x-start.x),(end.y-start.y)); else if(selected==("rrect")) g2.drawRoundRect(start.x, start.y, (end.x-start.x),(end.y-start.y),11,11); else if(selected==("line")) g2.drawLine(start.x,start.y,end.x,end.y); else if(selected==("poly")) g2.drawPolygon(x,y,2); } } catch(Exception e) {} } //Function to draw the shape on image public void draw() { Graphics2D g2 = image.createGraphics(); g2.setPaint(color); if(start!=null && end!=null) { if(selected=="line") g2.drawLine(start.x, start.y, end.x, end.y); else if(selected=="elipse") g2.drawOval(start.x, start.y, (end.x-start.x),(end.y-start.y)); else if(selected=="rect") g2.drawRect(start.x, start.y, (end.x-start.x),(end.y-start.y)); else if(selected==("rrect")) g2.drawRoundRect(start.x, start.y, (end.x-start.x),(end.y-start.y),11,11); else if(selected==("poly")) g2.drawPolygon(x,y,2); } if(label!=null) { JTextArea textarea=new JTextArea(); if(selected==("text")) { textarea.setBounds(label.x, label.y, 50, 50); textarea.setMaximumSize(new Dimension(100,100)); textarea.setBackground(new Color(237,237,237)); add(textarea); g2.drawString("key",label.x,label.y); } } start=null; repaint(); g2.dispose(); } public void text() { System.out.println(label); } //Function which provides the erase functionality public void erase() { Graphics2D pic=(Graphics2D) image.getGraphics(); Color erasecolor=new Color(237,237,237); pic.setPaint(erasecolor); if(start!=null) pic.fillRect(start.x, start.y, 10, 10); } //To set the size of the image public void setWidth(int x,int y) { System.out.println("("+x+","+y+")"); w=x; h=y; image = new BufferedImage(w, h, BufferedImage.TYPE_INT_ARGB); } //Function to add buttons into the panel, calling this function returns a panel public JPanel addButtons() { JPanel buttonpanel=new JPanel(); buttonpanel.setMaximumSize(new Dimension(70,70)); JPanel shape=new JPanel(); JPanel colourbox=new JPanel(); shape.setLayout(new GridLayout(4,2)); shape.setMaximumSize(new Dimension(70,140)); colourbox.setLayout(new GridLayout(3,3)); colourbox.setMaximumSize(new Dimension(70,70)); buttonpanel.setLayout(new BoxLayout(buttonpanel,BoxLayout.Y_AXIS)); elipse.addActionListener(this); elipse.setToolTipText("Elipse"); rectangle.addActionListener(this); rectangle.setToolTipText("Rectangle"); line.addActionListener( this); line.setToolTipText("Line"); erase.addActionListener(this); erase.setToolTipText("Eraser"); roundrect.addActionListener(this); roundrect.setToolTipText("Round rect"); polygon.addActionListener(this); polygon.setToolTipText("Polygon"); text.addActionListener(this); text.setToolTipText("Text"); shape.add(elipse); shape.add(rectangle); shape.add(line); shape.add(erase); shape.add(roundrect); shape.add(polygon); shape.add(text); buttonpanel.add(shape); for(int i=0;i<9;i++) { colourbutton[i]=new JButton(); colourbox.add(colourbutton[i]); if(i==0) colourbutton[0].setBackground(Color.black); else if(i==1) colourbutton[1].setBackground(Color.white); else if(i==2) colourbutton[2].setBackground(Color.red); else if(i==3) colourbutton[3].setBackground(Color.orange); else if(i==4) colourbutton[4].setBackground(Color.blue); else if(i==5) colourbutton[5].setBackground(Color.green); else if(i==6) colourbutton[6].setBackground(Color.pink); else if(i==7) colourbutton[7].setBackground(Color.magenta); else if(i==8) colourbutton[8].setBackground(Color.cyan); colourbutton[i].addActionListener(this); } buttonpanel.add(colourbox); buttonpanel.setBounds(0, 0, 70, 210); return buttonpanel; } public void mouseClicked(MouseEvent e) { if(selected=="text") { label=new Point(); label=e.getPoint(); draw(); } } @Override public void mouseEntered(MouseEvent arg0) { } public void mouseExited(MouseEvent arg0) { } public void mousePressed(MouseEvent e) { if(selected=="line"||selected=="erase"||selected=="text") { start=e.getPoint(); } else if(selected=="elipse"||selected=="rect"||selected=="rrect") { mp = e.getPoint(); } else if(selected=="poly") { x[0]=e.getX(); y[0]=e.getY(); } } public void mouseReleased(MouseEvent e) { if(start!=null) { if(selected=="line") { end=e.getPoint(); } else if(selected=="elipse"||selected=="rect"||selected=="rrect") { end.x = Math.max(mp.x,e.getX()); end.y = Math.max(mp.y,e.getY()); } else if(selected=="poly") { x[1]=e.getX(); y[1]=e.getY(); } draw(); } } public void mouseDragged(MouseEvent e) { if(end==null) end = new Point(); if(start==null) start = new Point(); if(selected=="line") { end=e.getPoint(); } else if(selected=="erase") { start=e.getPoint(); erase(); } else if(selected=="elipse"||selected=="rect"||selected=="rrect") { start.x = Math.min(mp.x,e.getX()); start.y = Math.min(mp.y,e.getY()); end.x = Math.max(mp.x,e.getX()); end.y = Math.max(mp.y,e.getY()); } else if(selected=="poly") { x[1]=e.getX(); y[1]=e.getY(); } repaint(); } public void mouseMoved(MouseEvent arg0) {} public void actionPerformed(ActionEvent e) { if(e.getSource()==elipse) selected="elipse"; else if(e.getSource()==line) selected="line"; else if(e.getSource()==rectangle) selected="rect"; else if(e.getSource()==erase) { selected="erase"; System.out.println(selected); erase(); } else if(e.getSource()==roundrect) selected="rrect"; else if(e.getSource()==polygon) selected="poly"; else if(e.getSource()==text) selected="text"; if(e.getSource()==colourbutton[0]) color=Color.black; else if(e.getSource()==colourbutton[1]) color=Color.white; else if(e.getSource()==colourbutton[2]) color=Color.red; else if(e.getSource()==colourbutton[3]) color=Color.orange; else if(e.getSource()==colourbutton[4]) color=Color.blue; else if(e.getSource()==colourbutton[5]) color=Color.green; else if(e.getSource()==colourbutton[6]) color=Color.pink; else if(e.getSource()==colourbutton[7]) color=Color.magenta; else if(e.getSource()==colourbutton[8]) color=Color.cyan; } @Override public void keyPressed(KeyEvent e) { System.out.println("pressed"); } @Override public void keyReleased(KeyEvent e) { System.out.println("key released"); } @Override public void keyTyped(KeyEvent e) { System.out.println("Typed"); } public static void main(String[] a) { new Paper(); } } class Button extends JButton { String name; public Button(String name) { this.name=name; } public void paintComponent(Graphics g) { super.paintComponent(g); Graphics2D g2 = (Graphics2D)g; g2.setRenderingHint(RenderingHints.KEY_ANTIALIASING, RenderingHints.VALUE_ANTIALIAS_ON); //g2.setStroke(new BasicStroke(1.2f)); if (name == "line") g.drawLine(5,5,30,30); if (name == "elipse") g.drawOval(5,7,25,20); if (name== "rect") g.drawRect(5,5,25,23); if (name== "roundrect") g.drawRoundRect(5,5,25,23,10,10); int a[]=new int[]{20,9,20,23,20}; int b[]=new int[]{9,23,25,20,9}; if (name== "poly") g.drawPolyline(a, b, 5); if (name== "text") g.drawString("Text",5, 22); } }

    Read the article

  • How do I ensure that a JPanel Shrinks when the parent frame is resized?

    - by dah
    I have a basic notes panel that I'm looking to shrink the width of when the parent jframe is resized but it isn't happening. I'm using nested gridbaglayouts. package com.protocase.notes.views; import com.protocase.notes.controller.NotesController; import com.protocase.notes.model.Subject; import com.protocase.notes.model.Note; import com.protocase.notes.model.database.PMSNotesAdapter; import java.awt.Color; import java.awt.GridBagConstraints; import java.awt.GridBagLayout; import javax.swing.BorderFactory; import javax.swing.JButton; import javax.swing.JLabel; import javax.swing.JPanel; import javax.swing.JScrollPane; /** * @author DavidH */ public class NotesViewer extends JPanel { // <editor-fold defaultstate="collapsed" desc="Attributes"> private Subject subject; private NotesController controller; //</editor-fold> // <editor-fold defaultstate="collapsed" desc="Getters N' Setters"> /** * Gets back the current subject. * @return */ public Subject getSubject() { return subject; } public NotesController getController() { return controller; } public void setController(NotesController controller) { this.controller = controller; } /** * Should clear the panel of the current subject and load the details for * the other object. * @param subject */ public void setSubject(Subject subject) { this.subject = subject; } //</editor-fold> // <editor-fold defaultstate="collapsed" desc="Constructor"> /** * -- Sets up a note viewer with a subject and a controller. Likely this * would be the constructor used if you were passing off from another * NoteViewer or something else that used a notes adapter or controller. * @param subject * @param controller */ public NotesViewer(Subject subject, NotesController controller) { this.subject = subject; this.controller = controller; initComponents(); } /** * -- Sets up a note view with a subject and creates a new controller. This * would be the constructor typically chosen if choosing notes was * infrequent and only one or two notes needs to be displayed. * @param subject */ public NotesViewer(Subject subject) { this(subject, new NotesController(new PMSNotesAdapter())); } /** * -- Sets up a note view without a subject and creates a new controller. * This would be for a note viewer without any notes, perhaps populating * as you choose values in another form. * @param subject */ public NotesViewer() { this(null); } //</editor-fold> // <editor-fold defaultstate="collapsed" desc="initComponents()"> /** * Sets up the view for the NotesViewer */ private void initComponents() { // -- Make a new panel for the header JPanel panel = new JPanel(); panel.setLayout(new GridBagLayout()); GridBagConstraints c = new GridBagConstraints(); c.gridx = 0; c.fill = GridBagConstraints.HORIZONTAL; c.gridy = 0; c.weightx = .5; //c.anchor = GridBagConstraints.NORTHWEST; JLabel label = new JLabel("Viewing Notes for [Subject]"); label.setAlignmentX(JLabel.LEFT_ALIGNMENT); label.setBorder(BorderFactory.createLineBorder(Color.YELLOW)); panel.add(label); JButton newNoteButton = new JButton("New"); c = new GridBagConstraints(); // c.fill = GridBagConstraints.HORIZONTAL; c.gridx = 1; c.gridy = 0; c.weightx = .5; c.anchor = GridBagConstraints.EAST; panel.add(newNoteButton, c); // -- NotePanels c = new GridBagConstraints(); c.fill = GridBagConstraints.HORIZONTAL; c.weightx = 1; c.weighty = 1; c.gridx = 0; c.gridwidth = 2; int y = 1; for (Note n : subject.getNotes()) { c.gridy = y++; panel.add(new NotesPanel(n, controller), c); } this.setLayout(new GridBagLayout()); GridBagConstraints pc = new GridBagConstraints(); pc.gridx = 0; pc.gridy = 0; pc.weightx = 1; pc.weighty = 1; pc.fill = GridBagConstraints.BOTH; panel.setBackground(Color.blue); JScrollPane scroll = new JScrollPane(); scroll.setViewportView(panel); //scroll.setHorizontalScrollBarPolicy(JScrollPane.HORIZONTAL_SCROLLBAR_NEVER); this.add(scroll, pc); //this.add(panel, pc); // -- Add it all to the layout } //</editor-fold> // <editor-fold defaultstate="collapsed" desc="private methods"> //</editor-fold> } package com.protocase.notes.views; import com.protocase.notes.controller.NotesController; import com.protocase.notes.model.Note; import java.awt.CardLayout; import java.awt.Color; import java.awt.Component; import java.awt.Dimension; import java.awt.GridBagConstraints; import java.awt.GridBagLayout; import java.awt.event.ActionEvent; import java.awt.event.ActionListener; import java.text.DateFormat; import java.text.SimpleDateFormat; import javax.swing.BorderFactory; import javax.swing.JButton; import javax.swing.JLabel; import javax.swing.JPanel; import javax.swing.JScrollPane; import javax.swing.JTextArea; import javax.swing.JTextField; import javax.swing.border.BevelBorder; import javax.swing.border.Border; import javax.swing.border.MatteBorder; /** * @author dah01 */ public class NotesPanel extends JPanel { // <editor-fold defaultstate="collapsed" desc="Attributes"> private Note note; private NotesController controller; private CardLayout cardLayout; private JTextArea viewTextArea; private JTextArea editTextArea; //</editor-fold> // <editor-fold defaultstate="collapsed" desc="Getters N' Setters"> public NotesController getController() { return controller; } public void setController(NotesController controller) { this.controller = controller; } public Note getNote() { return note; } public void setNote(Note note) { this.note = note; } //</editor-fold> // <editor-fold defaultstate="collapsed" desc="Constructor"> /** * Sets up a note panel that shows everything about the note. * @param note */ public NotesPanel(Note note, NotesController controller) { this.note = note; cardLayout = new CardLayout(); this.setLayout(cardLayout); // -- Setup the layout manager. this.setBackground(new Color(199, 187, 192)); this.setBorder(new BevelBorder(BevelBorder.RAISED)); // -- ViewPanel this.add("ViewPanel", initViewPanel()); this.add("EditPanel", initEditPanel()); } //</editor-fold> // <editor-fold defaultstate="collapsed" desc="EditPanel"> private JPanel initEditPanel() { JPanel editPanel = new JPanel(); editPanel.setLayout(new GridBagLayout()); GridBagConstraints c = new GridBagConstraints(); c.fill = GridBagConstraints.HORIZONTAL; c.gridy = 0; c.weightx = 1; c.weighty = 0.3; editPanel.add(initCreatorLabel(), c); c.gridy++; editPanel.add(initEditTextScroll(), c); c.gridy++; c.anchor = GridBagConstraints.WEST; c.fill = GridBagConstraints.NONE; editPanel.add(initEditorLabel(), c); c.gridx++; c.anchor = GridBagConstraints.EAST; editPanel.add(initSaveButton(), c); return editPanel; } private JScrollPane initEditTextScroll() { this.editTextArea = new JTextArea(note.getContents()); editTextArea.setLineWrap(true); editTextArea.setWrapStyleWord(true); JScrollPane scrollPane = new JScrollPane(editTextArea); scrollPane.setAlignmentX(JScrollPane.LEFT_ALIGNMENT); Border b = scrollPane.getViewportBorder(); MatteBorder mb = BorderFactory.createMatteBorder(2, 2, 2, 2, Color.BLUE); scrollPane.setBorder(mb); return scrollPane; } private JButton initSaveButton() { final CardLayout l = this.cardLayout; final JPanel p = this; final NotesController c = this.controller; final Note n = this.note; final JTextArea noteText = this.viewTextArea; final JTextArea textToSubmit = this.editTextArea; ActionListener al = new ActionListener() { @Override public void actionPerformed(ActionEvent e) { //controller.saveNote(n); noteText.setText(textToSubmit.getText()); l.next(p); } }; JButton saveButton = new JButton("Save"); saveButton.addActionListener(al); saveButton.setPreferredSize(new Dimension(62, 26)); return saveButton; } //</editor-fold> // <editor-fold defaultstate="collapsed" desc="ViewPanel"> private JPanel initViewPanel() { JPanel viewPanel = new JPanel(); viewPanel.setLayout(new GridBagLayout()); GridBagConstraints c = new GridBagConstraints(); c.fill = GridBagConstraints.HORIZONTAL ; c.gridy = 0; c.weightx = 1; c.weighty = 0.3; viewPanel.add(initCreatorLabel(), c); c.gridy++; viewPanel.add(this.initNoteTextArea(), c); c.fill = GridBagConstraints.NONE; c.anchor = GridBagConstraints.WEST; c.gridy++; viewPanel.add(initEditorLabel(), c); c.gridx++; c.anchor = GridBagConstraints.EAST; viewPanel.add(initEditButton(), c); return viewPanel; } private JLabel initCreatorLabel() { DateFormat formatter = new SimpleDateFormat("yyyy-MM-dd"); if (note != null) { String noteBy = "Note by " + note.getCreator(); String noteCreated = formatter.format(note.getDateCreated()); JLabel creatorLabel = new JLabel(noteBy + " @ " + noteCreated); creatorLabel.setAlignmentX(JLabel.LEFT_ALIGNMENT); return creatorLabel; } else { System.out.println("NOTE IS NULL"); return null; } } private JScrollPane initNoteTextArea() { // -- Setup the notes area. this.viewTextArea = new JTextArea(note.getContents()); viewTextArea.setEditable(false); viewTextArea.setLineWrap(true); viewTextArea.setWrapStyleWord(true); JScrollPane scrollPane = new JScrollPane(viewTextArea); scrollPane.setAlignmentX(JScrollPane.LEFT_ALIGNMENT); return scrollPane; } private JLabel initEditorLabel() { // -- Setup the edited by label. JLabel editorLabel = new JLabel(" -- Last edited by " + note.getLastEdited() + " at " + note.getDateModified()); editorLabel.setAlignmentX(Component.LEFT_ALIGNMENT); return editorLabel; } private JButton initEditButton() { final CardLayout l = this.cardLayout; final JPanel p = this; ActionListener ar = new ActionListener() { @Override public void actionPerformed(ActionEvent e) { l.next(p); } }; JButton editButton = new JButton("Edit"); editButton.setPreferredSize(new Dimension(62,26)); editButton.addActionListener(ar); return editButton; } //</editor-fold> // <editor-fold defaultstate="collapsed" desc="Grow Width When Resized"> @Override public Dimension getPreferredSize() { int fw = this.getParent().getSize().width; int fh = super.getPreferredSize().height; return new Dimension(fw,fh); } //</editor-fold> }

    Read the article

  • Android chess development design [on hold]

    - by Plejo
    I want to develop human vs human android chess game and I have bunch of new questions. I would like to have screen where online players are shown(nickname, rating) and when player challenge antoher player and he accpet it game begins. These are my questions: When player install application, does he have to create account/login or does every instance of installed application have some kind of ID so I can recognize it on server side? I want to have also ratings of players saved in my DB so login procedure will probably be necessary. When player connects to server server updates online players list. When he challenge another player and he accept server exchange ip`s(and ports? which port to use?) between players. Then they connect to each other and game begins. What is best practice for connection between server-android and android-android? Probably sockets, right? Is there any library for handling lost connection etc.? Which server do you recommend?

    Read the article

  • What does the BIOS setting XHCI Pre-Boot Mode do?

    - by Jamie Kitson
    I have a BIOS setting called XHCI Pre-Boot Mode. If I have this enabled USB devices which aren't plugged in at boot are never recognised, if I set it to Disabled then USB devices work normally. The brief BIOS description says "Enable this option if you need USB3.0 support in DOS." Which I don't, but it also says "Please note that XHCI controller will be disabled if you set this item as Disabled." So does that mean that USB3 is disabled with this option? Here's a picture of the screen: http://www.flickr.com/photos/jamiekitson/8017563004/

    Read the article

  • Openfire: Closing session due to incorrect hostname

    - by cvista
    I have a fresh install on a windows sevrer 2008 box. I can connect adium to the server from a remote machine and from the admin console/sessions I can see my session. My friend can aslo connect and I can see his session. I can send an admin message out and both of us can see it in the adium clients. We can't see each other though. I also get these logs in the warn window in the log viewer: Closing session due to incorrect hostname in stream header. Host: prjatk.com. Connection: org.jivesoftware.openfire.net.SocketConnection@1b1fd9c socket: Socket[addr=/109.109.248.82,port=56258,localport=5269] session: null prjatk.com is the server - however in the server settings on the admin screen I see the computer name as the hostname - is that the issue? If so how can I change that?

    Read the article

  • Remotely Schedule and Stream Recorded TV in Windows 7 Media Center

    - by DigitalGeekery
    Have you ever been away from home and suddenly realized you forgot to record your favorite program? Now Windows 7 Media Center, users can schedule recordings remotely from their phones or mobile devices with Remote Potato. How it Works Remote Potato installs server software on the host computer running Windows 7 Media Center. Once the software is installed, we’ll need to do some port forwarding on the router and setup an optional dynamic DNS address. When setup is completed, we will access the application through a web based interface. Silverlight is required for Streaming recorded TV, but scheduling recordings can be done through an HTML interface. Installing Remote Potato Download and install Remote Potato on the Media Center PC. (See download link below) If you plan to stream any Recorded TV, you’ll also want to install the streaming pack located on the same page. It isn’t required to stream all shows, only shows that require the AC3 audio codec. Click Yes to allow Remote Potato to add rules to the Windows Firewall for remote access. You’ll likely need to accept a few UAC prompts. When notified that the rules were added, click OK. Remote Potato will then prompt you to allow administrator privileges to reserve a URL for it’s web server. Click Yes. Remote Potato server will start. Click on the configuration button at the right to to reveal the settings tabs.   One the General tab, you’ll have the option to run Remote Potato on startup and minimized in the System Tray. If you’re running Media Center on a dedicated HTPC, you’ll probably want to enable both startup options. Forwarding Ports on Your Router You’ll need to forward a couple ports on your router. By default, these will be ports 9080 and 9081. In this example we’re using a Linksys WRT54GL router, however, the steps for port forwarding will vary from router to router. On the Linksys configuration page, click on the Applications & Gaming Tab, and then the Port Range Forward tab. Under Application, type in a name of your choosing. In both the Start and End boxes, type the port number 9080. Enter the local IP address of your Media Center computer in the IP address column. Click the check box under Enable. Repeat the process on the next line, but this time use port 9081. When finished, click the Save Settings button. Note: It’s highly recommended that you configure the home computer running Media Center & Remote Potato with a static IP address.   Find your IP Address You’ll need to find the IP address assigned to your router from your ISP. There are many ways to do this but a quick and easy way is to visit a site like checkip.dyndns.org (link available below) The current external IP address of your router will be displayed in the browser.   Dynamic DNS This is an optional step, but  it’s highly recommended. Many routers, such as the Linksys WRT54GL we are using, support Dynamic DNS (DDNS). What Dynamic DNS allows you to do is affiliate your home router’s external IP address to a domain name. Every time your home router is assigned a a new IP address by your ISP, the domain name is updated to point to your new IP address. Remote Potato’s user interface is accessed over the Internet is by connecting to your router’s IP address followed by a colon and the port number. (Ex: XXX.XXX.XXX.XXX:9080) Instead of constantly having to look up and remember an IP address, you can use DDNS along with a 3rd party provider like DynDNS.com, to sign up for a free domain name and configure it to be updated each time your router is assigned a new IP address. Go to the DynDNS.com website (See link at the end of the article) and sign up for a free Domain name. You’ll need to register and confirm by email.   Once you’ve signed in and selected your domain name click Activate Services. You’ll get a confirmation message that your domain name has been activated.    On the Linksys WRT54GL click on the Setup tab an then DDNS. Select DynDNS.org, or TZO.com if you prefer to use their service, from the drop down list.   With DynDNS, you’ll need to fill in your username and password you signed up with at the DynDNS website and the hostname you chose. Note: You can connect over your local network with the IP Address of the computer running Remote Potato followed by a colon and the port number. Ex: 192.168.1.2:9080 Logging in Remote Potato and Recording a Show Once you connect, you’ll see the start page. To view the TV listings, click on TV Guide. You’ll then see your guide listings. There are a few ways to navigate the listings. At the top left, you can click on any of the preset time buttons to jump to  the listings at that time of the day.  Click on the arrows to the right and left of the day and date at the top center to proceed to the previous or next day. Or, jump to a specific day with the date and date buttons at the top right.   To setup a recording, click on a program.   You can choose to record the individual show or the entire series by clicking on Record Show or Record Series.   Remote Potato on Mobile Devices Perhaps the coolest feature of Remote Potato is the ability to schedule recording from your phone or mobile device. Note: For any devices or computers without Silverlight, you will be prompted to view the HTML page. Select Browse Listings. Select your program to record. In the Program Details, select Record Show to record the single episode or Record Series to record all instances of the series. You will then see a red dot on the program listing to indicate that the show is scheduled for recording.   Streaming Recorded TV Click on Recorded TV from the home screen to access your previously recorded TV programs. Click on the selection you wish to stream. Click on Play. If you receive this error message, you’ll need to install the streaming pack for Remote Potato. This is found on the same download page as installation files. (See link below) The Begin from slider allows you to start playback from the start (by default) or a different time of the program by moving the slider. The Quality (bitrate) setting  allows you to choose the quality of the playback. We found the video quality on the Normal setting to be pretty lousy, and Low was just pointless. High was the best overall viewing experience as it provided smooth quality video playback. We experienced significant stuttering during playback using the Ultra High setting.   Click Start when you are ready to begin. When playback begins you’ll see a slider at the top right.   Move the slider left or right to increase or decrease the size of the video. There’s also a button to switch to full screen.   Media Center users who travel frequently or are always on the go will likely find Remote Potato to be a blessing. Since being released earlier this year, updates for Remote Potato have come fast and furious. The latest beta release includes support for streaming music and photos. If you like those nice network TV logos, check out our article on adding TV channel logos to Windows Media Center. Downloads and Links Download Remote Potato and Streaming Pack Find your IP address Sign Up for a Domain Name at DynDNS.com Similar Articles Productive Geek Tips Schedule Updates for Windows Media CenterUsing Netflix Watchnow in Windows Vista Media Center (Gmedia)Add a Sleep Timer to Windows 7 Media CenterStartup Customizations for Media Center in Windows 7Enable Media Streaming in Windows Home Server to Windows Media Player TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 FoxClocks adds World Times in your Statusbar (Firefox) Have Fun Editing Photo Editing with Citrify Outlook Connector Upgrade Error Gadfly is a cool Twitter/Silverlight app Enable DreamScene in Windows 7 Microsoft’s “How Do I ?” Videos

    Read the article

  • Cannot enable network discovery on Windows Server 2008 R2

    - by dariom
    I'm trying to enable the Network Discovery feature on a newly installed Windows Server 2008 R2 instance. The network connection is in the Home or Work profile (it is not domain joined). These are the steps I've followed: Within the Network and Sharing Center I select Change advanced sharing settings Then I select the Turn on network discovery option for the current network profile (Home or Work) I then click Save changes If I then go back to the Advanced sharing settings screen the Turn off network discovery option is selected and the machine is not visible to others within the Network node in Windows Explorer. Things I've checked: I can ping the server and connect to it using the machine name/IP address. The Windows Firewall has exceptions for Network Discovery for both Private and Public networks. File and Printer sharing is enabled and I can transfer files to/from the server by connecting to the server using a UNC path. What am I missing here?

    Read the article

< Previous Page | 462 463 464 465 466 467 468 469 470 471 472 473  | Next Page >