Search Results

Search found 33182 results on 1328 pages for 'linux port'.

Page 467/1328 | < Previous Page | 463 464 465 466 467 468 469 470 471 472 473 474  | Next Page >

  • compressing dd backup on the fly

    - by Phil
    Maybe this will sound like dumb question but the way i'm trying to do it doesn't work. I'm on livecd, drive is unmounted, etc. When i do backup this way sudo dd if=/dev/sda2 of=/media/disk/sda2-backup-10august09.ext3 bs=64k ...normally it would work but i don't have enough space on external hd i'm copying to (it ALMOST fits into it). So I wanted to compress this way sudo dd if=/dev/sda2 | gzip > /media/disk/sda2-backup-10august09.gz ...but i got permissions denied. I don't understand.

    Read the article

  • TORQUE: Find out why the job is queued?

    - by ahmad
    Under TORQUE-MAUI job scheduling system, there are several reasons to have a job stayed in Q state. Those that I know are: There are not enough resource to run the Queued job. The user is not allowed to have further running jobs. The user is not allowed to have further computation cores. Is there any other reason to have the queued job? Further information: I am asking the question because I have couple of queued jobs while some nodes are free, pbs_mom is on on them, and mauid limitations are generously large. Thanks in advance.

    Read the article

  • How to delete files on the command line with regular expressions?

    - by Jack
    Lets say I have 20 files named FOOXX, where XX is the number of the file, eg 01, 02 etc. At the moment, if I want to delete all files lower than the number 10, this is easy and I just use a wildcard, eg rm FOO0* However, if I want to delete specific files ina range, eg 13-15, this becomes more difficult. rm FPP[13-15] does not work, and asks me if I wish to delete all files. Likewse rm FOO1[3-5] wishes to delete all files that begin with FOO1 So, what is the best way to delete ranges of files like this? I have tried with both bash and zsh, and I don't think they differ so much for such a basic task?

    Read the article

  • Explaining Git to someone new to revision control

    - by MaxMackie
    I've recently decided to jump into the whole world of revision control to work on some open source projects I have. I looked around (subversion, mercurial, git, etc) and found that Git seemed to make more sense conceptually to me. I've set everything up on my computer (opensuse) and made an account on gitorious (let me know if there is a more simple/better hosting provider). I understand Git from a conceptual point of view (work locally, commit to a local repo, others can now checkout from you, right?). But where does gitorious come into play? I commit to them as well as committing locally? Apart from conceptually, I don't quite understand HOW it works when it comes to making a local repository and running git init inside a folder and that HEAD file. Keep in mind I have never used any form of revision control ever before. So even the most basic concepts are foreign to me. As I post this, I'm also reading up and trying to figure it out myself.

    Read the article

  • Install ubuntu with Win7

    - by 123Ex
    I'm using windows 7, Now I need to install Ubuntu 11.04 to the my lap top, I want keep win7 in my lap, I'm planing to keep dual boot system on my lap, I want to install Ubuntu on separate partition, I have deleted my windows empty partition to allocate the space to Ubuntu but when I'm proceeding with installation in Ubuntu, I couldn't recognize the empty partition, Ubuntu shows my full hard disk space one 50GB partition to install, I couldn't recognize the 50GB partition, can anyone tell me how to install Ubuntu on my lap. I really appreciate it, I want to install Ubuntu without loosing my existing data, to do that I have allocated empty unlocated disk space. Thank you in advance!

    Read the article

  • mount qcow2 snapshots

    - by phhe
    I'm running some Xen-servers and started migrating to KVM. Currently my guests are either running on raw-images or LVMs. I found libvirt providing some very nice snapshot features (virsh snapshot-create, ...) so I decided to use qcow2 instead of raw/lvm. And here is my question: libvirt creates the same sort of snapshots on the qcow2 image as if I use qemu-img - is it possible to mount them ? I read something about qemu-nbd and the possibility of mounting qcow but I could not find a word about snapshots.

    Read the article

  • Google Chrome doesn't keep my "allow all cookies" setting

    - by jldupont
    It seems that Google Chrome doesn't keep my "allow all cookies" settings (dev 5.0.322.2) anymore. Google's sites keep on showing: Your browser's cookie functionality is turned off. Please turn it on. [?] but every I perform the prescribed steps, Chrome doesn't keep the configuration! update: I've deleted ~/.config/google-chrome/Default/Preferences and restarted with a clean state. Now it seems to work.

    Read the article

  • SSD suddenly full

    - by Daniel
    Today the hard drive of our server was suddenly full. The disk usage always stayed around 50 % in the weeks and months before (old data is regularly expunged from the server). I deleted 10 GB of files in /tmp, which strangely freed 51 GB. Here is what I did: root@***:~# df -h Dateisystem Size Used Avail Use% Eingehängt auf /dev/sda3 139G 137G 0 100% / tmpfs 3,9G 0 3,9G 0% /lib/init/rw udev 3,9G 116K 3,9G 1% /dev tmpfs 3,9G 0 3,9G 0% /dev/shm /dev/sda1 985M 25M 910M 3% /boot root@***:/var# du -hs * 3,3M backups 438M cache 9,4G lib 4,0K local 12K lock 76M log 24K mail 4,0K opt 88K run 184K spool 10G tmp 12K www root@***:/var/tmp# find -type f -print0 | xargs -0 rm root@***:/var/tmp# df -h Dateisystem Size Used Avail Use% Eingehängt auf /dev/sda3 139G 81G 51G 62% / tmpfs 3,9G 0 3,9G 0% /lib/init/rw udev 3,9G 116K 3,9G 1% /dev tmpfs 3,9G 0 3,9G 0% /dev/shm /dev/sda1 985M 25M 910M 3% /boot Any explanation as to why deleting 10 GB in /tmp gave me back 51 GB on the disk? Could this point to an SSD failure? Are there any tools for Debian to test SSD health? I already have checked syslog. The first entry relating to this incidient is a mysql message: 1:22:02 [ERROR] /usr/sbin/mysqld: Disk is full writing... So I have absolutely no idea what caused this.

    Read the article

  • Application windows have colossal fonts in Enlightenment 17, while system windows are untouched

    - by Matt
    I'm trying to get used to using Enlightenment instead of KDE on my Slackware64 multilib computer, but I'm having a terrible time getting one problem fixed. My fonts are HUGE on application windows - from Firefox to Gimp to Xchat to anything else, all the fonts are 3x the size they should be. But at the same time, the system menu is the correct size. I'm at a loss - I want the applications to have the same DPI as the system menu. When I'm in KDE, they all look normal. I've included a screenshot to show what I'm talking about.

    Read the article

  • Finding the current user authenticated by basic auth (Apache)

    - by jtd
    When you log in through a basic auth page, is the username you authenticated as stored anywhere (on the server or client machine), maybe in an environment variable? Background: I have a common web administration page for an e-mail server and I'd like to know who is doing what. When a user successfully logs in via basic auth, I somehow want to be able to identify them and log their actions. So each time a request is submitted, I can write to a log file. The basic format would be: $username ran a $function against $useraccount so if a user changed someone's permissions, eg: Admin-Bob ran a permission change against User-Scott So if errors occur, I can easily trace back in the log file what actions lead to the cause. I tried checking the %ENV hash to no avail, any Ideas? I don't really want to get into PHP-like sessions, because that would mean scrapping my basic auth, which gives me a fine degree of control already. If I have to code something with sessions, I'd need to implement a system to block users after maximum tries and so on, which I don't really want to code. I think this is better geared towards serverfault because it pertains to Apache moreso than the programming language. Sessions can be done in a myriad of languages.

    Read the article

  • virsh console and tty size

    - by pehrs
    I have a virtualization server to which I connect over ssh. If I now change the size of the window it will automatically propagate to the server. It's most easily seen using stty -a, checking the columns and row values. I then use virsh console to connect to the serial interface on a KVM based virtual machine. When I now change the size of the window it does not propagate to the virtual server. This is most easily seen by checking stty -a, which is not updated on the virtual machine when I change window size. This means that line breaks does not work correctly in the terminal and any application that relies on window size for formatting (emacs, man, etc) gets messed up unless the window size on the client matches the default size on the server. A workaround is to manually set the window size to match the client window using stty, but I wonder if there is any way to get this information to propagate and set the window size in the virtual machine automatically.

    Read the article

  • Trying to change a Ubuntu user's password, authentication token manipulation error

    - by beagleguy
    I'm trying to create a local user on a new Ubuntu box. I'm unable to change the password, and I keep getting the error below. The user gets added to the shadow file, but I can't get it to set a password. How can this be fixed? admin@theserver:~$ sudo useradd jamz [sudo] password for admin: admin@theserver:~$ sudo passwd jamz passwd: Authentication token manipulation error passwd: password unchanged admin@theserver:~$

    Read the article

  • Does changing web hosts (changing a domain's nameservers) affect the private nameservers / glue records created under that domain?

    - by Kris
    We currently have a virtual dedicated server with GoDaddy and have 4 domains under it. I ended up creating private nameservers under, say mydomain_a.com, and have ns1.mydomain_a.com and ns2.mydomain_a.com as the nameservers for the other 3 domains. Now, we're thinking of switching web hosts (not domain registrar just the host) which means I have to change mydomain_a.com's nameservers to the new host. Will that affect or mess with the other 3 domains still pointing to ns1.mydomain_a.com and ns2.mydomain_a.com? Will that affect the private nameservers / glue records in anyway? Currently: domain: mydomain_a.com nameservers (GoDaddy): ns1.mydomain_a.com ns2.mydomain_a.com domain: mydomain_b.com nameservers (GoDaddy): ns1.mydomain_a.com ns2.mydomain_a.com After the Change: domain: mydomain_a.com nameservers (Other Host): ns1.some_other_host_ns.com ns2.some_other_host_ns.com This is my Question, Would this be affected? domain: mydomain_b.com nameservers (GoDaddy): ns1.mydomain_a.com ns2.mydomain_a.com

    Read the article

  • Do background processes get a SIGHUP when logging off?

    - by Massimo
    This is a followup to this question. I've run some more tests; looks like it really doesn't matter if this is done at the physical console or via SSH, neither does this happen only with SCP; I also tested it with cat /dev/zero > /dev/null. The behaviour is exactly the same: Start a process in the background using & (or put it in background after it's started using CTRL-Z and bg); this is done without using nohup. Log off. Log on again. The process is still there, running happily, and is now a direct child of init. I can confirm both SCP and CAT quits immediately if sent a SIGHUP; I tested this using kill -HUP. So, it really looks like SIGHUP is not sent upon logoff, at least to background processes (can't test with a foreground one for obvious reasons). This happened to me initially with the service console of VMware ESX 3.5 (which is based on RedHat), but I was able to replicate it exactly on CentOS 5.4. The question is, again: shouldn't a SIGHUP be sent to processes, even if they're running in background, upon logging off? Why is this not happening? Edit I checked with strace, as per Kyle's answer. As I was expecting, the process doesn't get any signal when logging off from the shell where it was launched. This happens both when using the server's console and via SSH.

    Read the article

  • understanding my site's DNS records

    - by DaveM
    firstly apologies for using the word 'pointage' this is the word my french domain registrar uses so I may have used to wrong term. OK I would like to better understand what is going on on my 'pointage' record on my domain registrars site. for my (currently empty) web site it reports the following details... Type : Host : Destination A : www.mydomain.org : 62.210.176.146 A : mail.mydomain.org : 84.246.225.176 Mx : .mydomain.org : mail.mydomain.org I think I understand the MX record, that simply relays anything onto the mail.mydomain.org location. However why are the destination for the www and mail domains different. Even more confusing (for me) is the fact that if I ping either of www.mydomain.org or mail.mydomain.org the ping returns a different IP address. This IP address is consistent with that of my server (ie 92.39.247.92). So what exactly is going on ? I'm sure I could find the information on the web,I've read a few thing on the debianhelp site regarding DNS records, and it seems to suggest that the record should be a reverse lookup, but certains isn't the reverse of my servers IP ? but I don't what I should be looking for, so links to docs and search terms for google will be happily accepteed (even though they go against the grain of SO answers to question). thanks in advance. David. ps. I should add that everything seems to work just fine, and I've just descovered this part of the management page of my registrar. Edit: Addition of DNS records and ping results. The DNS record for the site. From what I've read there should only realy be a single 'A' record, so has something gone wrong ? should I change it (remove the extras and then just point www.facilitee.org - .facilitee.org and mail.facilitee.org - .facilitee.org here is the DNS record A www.facilitee.org ? 92.39.247.92 A .facilitee.org ? 92.39.247.92 A mail.facilitee.org ? 92.39.247.92 A webmail.facilitee.org ? 92.39.247.92 MX .facilitee.org ? mail.facilitee.org ping results... ~$ ping www.facilitee.org PING www.facilitee.org (92.39.247.92) 56(84) bytes of data. 64 bytes from vps4576-cloud.dns26.com (92.39.247.92): ~$ ping mail.facilitee.org PING mail.facilitee.org (92.39.247.92) 56(84) bytes of data. 64 bytes from vps4576-cloud.dns26.com (92.39.247.92): So the DNS and the ping correspond, but the 'pointage' doesn't. ~ how can I get a report of the pointage records other than from my registrar ?

    Read the article

  • Hearing a clicking noise from soundcard all the time

    - by Mehrdad
    I have installed Fedora 17 on my laptop. A few days ago I updated my fedora (but not upgraded). I shut down my computer and since the next time I turned it on I am hearing a clicking noise all the time from speakers. Even when I plug my headphones in I hear the noise through the headphone. I surfed over the internet and found the following shell commands: su -c 'echo "options snd_hda_intel power_save=0" /etc/modprobe.d/snd_hda_intel.conf' su -c 'echo 0 /sys/module/snd_hda_intel/parameters/power_save' I tried them but they didn't work. Here is the part of "lspci" command related to my sound-card: 00:1b.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 03) I have to add that my sound-card is working and I can play some audio file, I mean I can hear the voice and noise simultaneously. But everything is OK in windows xp which is also installed on my laptop. Could it be related to the sound-card driver? If so, how can I revert it to the previous version?

    Read the article

  • gpasswd and access to a file or directory

    - by PeanutsMonkey
    As I understand it if I run the command gpasswd -A username directoryname I assign administrator privileges to username for the directory directoryname. This means that username is able to add new members to the group for directoryname without root privileges. Does this also mean that username belongs to the group or do I need to add username to the group using the commands usermod, gpasswd -a or gpasswd -M

    Read the article

  • how to use iptables to block the IP of device connected to openwrt router

    - by scola
    I have two routers(A,B).the A connect to internet with IP:192.168.1.1 The openwrt router B connect the lan of A by bridge with static IP:192.168.1.111. I am learning to use iptables to control the devices connected to B(wlan) . I use my phone to connect wifi of B,the phone's IP is IP:192.168.1.100.it can surf the internet normally. I want to block the phone's IP to make the phone can not connect to internet. refer to http://bredsaal.dk/some-small-iptables-on-openwrt-tips iptables -A input_wan -s 192.168.1.100 --jump REJECT iptables -A forwarding_rule -d 192.168.1.100 --jump REJECT but it do not work.the phone still connect to internet normally. and I tried other chain(INPUT,OUTPUT,FORWARD).so many chains confused me. iptables -I OUTPUT -o br-lan -s 192.168.1.100 -j DROP and it do not work again. I'm sure that the iptables have no problem. root@OpenWrt:/etc# iptables -L|grep Chain Chain INPUT (policy ACCEPT) Chain FORWARD (policy DROP) Chain OUTPUT (policy ACCEPT) Chain forward (1 references) Chain forwarding_lan (1 references) Chain forwarding_rule (1 references) Chain forwarding_wan (1 references) Chain input (1 references) Chain input_lan (1 references) Chain input_rule (1 references) Chain input_wan (1 references) Chain output (1 references) root@OpenWrt:/etc# ifconfig br-lan Link encap:Ethernet HWaddr 0C:82:68:97:57:BA inet addr:192.168.1.111 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::e82:68ff:fe97:57ba/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:14976 errors:0 dropped:0 overruns:0 frame:0 TX packets:7656 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2851980 (2.7 MiB) TX bytes:1902785 (1.8 MiB) eth0 Link encap:Ethernet HWaddr 0C:82:68:97:57:BA UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:58201 errors:0 dropped:11 overruns:0 frame:0 TX packets:45012 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:54591348 (52.0 MiB) TX bytes:5711142 (5.4 MiB) Interrupt:4 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:312 errors:0 dropped:0 overruns:0 frame:0 TX packets:312 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:39961 (39.0 KiB) TX bytes:39961 (39.0 KiB) mon.wlan0 Link encap:UNSPEC HWaddr 0C-82-68-97-57-BA-00-48-00-00-00-00-00-00-00-00 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:4900 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:32 RX bytes:1223807 (1.1 MiB) TX bytes:0 (0.0 B) wlan0 Link encap:Ethernet HWaddr 0C:82:68:97:57:BA UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:37346 errors:0 dropped:0 overruns:0 frame:0 TX packets:49662 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:32 RX bytes:3808021 (3.6 MiB) TX bytes:54486310 (51.9 MiB) root@OpenWrt:/etc/config# cat network config 'interface' 'loopback' option 'ifname' 'lo' option 'proto' 'static' option 'ipaddr' '127.0.0.1' option 'netmask' '255.0.0.0' config 'interface' 'lan' option 'ifname' 'eth0' option 'type' 'bridge' option 'proto' 'static' option 'ipaddr' '192.168.1.111' option 'netmask' '255.255.255.0' option 'gateway' '192.168.1.1' option dns 192.168.1.1 and how to use iptables to control the network of wlan? Thanks in advance and sorry for poor English.

    Read the article

  • Why is cron mailing me program output even though I've redirected to /dev/null?

    - by Server Fault
    I'm trying to restart a system process through cron and getting emailed the startup output of the process. I thought redirecting STDOUT and SDTERR to /dev/null would "silence" the output but alas, this has not work. How can I get cron to silently restart this service? crontab entry: 0 6 * * * service sympa stop &>/dev/null; service sympa start &> /dev/null sample output from restart email: Stopping Sympa bounce manager bounced ...done. * Stopping Sympa task manager task_manager ...done. * Stopping Sympa mailing list archive manager archived ...done. * Stopping Sympa mailing list manager sympa ...done. ... waiting Prototype mismatch: sub Lock::LOCK_SH () vs none at /home/sympa/bin/Lock.pm line 38. Constant subroutine LOCK_SH redefined at /home/sympa/bin/Lock.pm line 38. Prototype mismatch: sub Lock::LOCK_EX () vs none at /home/sympa/bin/Lock.pm line 39. Constant subroutine LOCK_EX redefined at /home/sympa/bin/Lock.pm line 39. Prototype mismatch: sub Lock::LOCK_NB () vs none at /home/sympa/bin/Lock.pm line 40. Constant subroutine LOCK_NB redefined at /home/sympa/bin/Lock.pm line 40.

    Read the article

  • How to start a service at boot time in ubuntu 12.04, run as a different user?

    - by Alex
    I have a server ClueReleaseManager which I have installed on a Ubuntu 12.04 system from a separate user (named pypi), and I want to be able to start this server at startup. I already have tried to create a simple bash script with some commands (login as user pypi, use a virtual python environment, start the server), but this does not work properly. Either the terminal crashes or when I try to ask the status of the service it is started and I am logged in as user pypi ...? So, here the question: What are the steps to take to make sure the ClueReleaseManager service properly starts up on boot time, and which I can control (start/stop/..) during runtime, while the service is running from a user pypi? Additional information and constraints: I want to do this as simple as possible Without any other packages/programs to be installed I am not familiar with the Ubuntu 12.04 init structure All the information I found on the web is very sparse, confusing, incorrect or does not apply to my case of running a service as a different user from root.

    Read the article

  • How to understand cpu family/model/stepping fields in /proc/cpuinfo [closed]

    - by Victor Sorokin
    I have following in cpuinfo: processor : 0 vendor_id : AuthenticAMD cpu family : 15 model : 107 model name : AMD Athlon(tm) 64 X2 Dual Core Processor 5600+ stepping : 2 According to Wikipedia page there are two kinds of 5600+ -- one of 90nm technology, another of 65nm. How can I understand which one I have? There seem to be no direct correspondence between contents of cpuinfo and info on Wikipedia page. AMD site seems to use some other naming scheme for processors too. How can I map values of family, model and stepping from cpuinfo to the data available on Wikipedia/AMD?

    Read the article

  • Configuring postfix with Gmail

    - by MultiformeIngegno
    This is what I did.. sudo apt-get install postfix This is my /etc/postfix/main.cf: # See /usr/share/postfix/main.cf.dist for a commented, more complete version # Debian specific: Specifying a file name will cause the first # line of that file to be used as the name. The Debian default # is /etc/mailname. #myorigin = /etc/mailname smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) biff = no # appending .domain is the MUA's job. append_dot_mydomain = no # Uncomment the next line to generate "delayed mail" warnings #delay_warning_time = 4h readme_directory = no # TLS parameters smtpd_tls_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem smtpd_tls_key_file=/etc/ssl/private/ssl-cert-snakeoil.key smtpd_use_tls=no smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache myhostname = tsXXX561.server.topcloud.it alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases myorigin = /etc/mailname mydestination = relayhost = [smtp.gmail.com]:587 mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = loopback-only default_transport = smtp relay_transport = smtp inet_protocols = all # SASL Settings smtp_use_tls=yes smtp_sasl_auth_enable = yes smtp_sasl_password_maps = hash:/etc/postfix/sasl_passwd smtp_sasl_security_options = noanonymous smtp_sasl_tls_security_options = noanonymous smtp_tls_CAfile = /etc/postfix/cacert.pem Then I created the file /etc/mailname with my hostname as content: tsXXX561.server.topcloud.it Then I created the file /etc/postfix/sasl_passwd: [smtp.gmail.com]:587 [email protected]:gmail_password Then sudo postmap /etc/postfix/sasl/passwd sudo cat /etc/ssl/certs/Thawte_Premium_Server_CA.pem | sudo tee -a /etc/postfix/cacert.pem service postfix restart Still sends nothing... I'm on Ubuntu Server 12.04.

    Read the article

  • Create a video stream from an image

    - by skerit
    I have a network camera that is only able to give me an image, not a video stream. In my home network this image is at http://192.168.1.16/loginfree.jpg I'm able to get this image a few times per second. I would now like to be able to serve it up as a video stream so I can use it in zoneminder. Any idea as to how I do that? I've messed around with named pipes and ffmpeg's image2pipe, but I can't get it to work properly.

    Read the article

  • default virtual network interface

    - by Zulakis
    I got a single ethernet connection to a network but need multiple ips. Because of this, I am using virtual network interfaces like this: auto intern iface intern inet static address ... netmask ... gateway ...U auto intern:1 iface intern:1 inet static address ... netmask ... gateway ... I need to specify which IP should be used by default for outgoing traffic. How can I do that?

    Read the article

< Previous Page | 463 464 465 466 467 468 469 470 471 472 473 474  | Next Page >