Search Results

Search found 18911 results on 757 pages for 'device manager'.

Page 469/757 | < Previous Page | 465 466 467 468 469 470 471 472 473 474 475 476  | Next Page >

• Mac Mini 1.66 no sound on Windows 7

  - by Steph

  I've tried everything I could to get the sound working. I've tried to install the drivers from the Snow Leopard disk, then I went and got the latest RealTek drivers from the RealTek website. Then I read that old Mac mini's could have an integrated Cirrus chip, and I tried to grab the latest driver from the website, and it appeared to install, but nothing. There's also nothing listed under Sound and ... in the Device Manager. I've tried to manually include a legacy driver, which worked for RealTek but not for the Cirrus driver. Of course it said there was no RealTek hardware install, which makes me think it's a Cirrus chip. Any further suggestions or thoughts would be really appreciated. This is a Mac Mini 1.66. I'm also not sure how to be able to detect what card is integrated into the system, so that would be helpful too (remembering that there's no driver installed). Even just to get the chip type would be great to confirm.

  Read the article

• Skipping hardlinks when using TSM Backup

  - by Lars Haugseth

  We need to backup a filesystem with lots of hardlinks. Since there are several hardlinks for each "true" file, we would like to skip all the hardlinks when backing up the filesystem to avoid n exact copies of each file. The backup is done using Tivoli Storage Manager Backup, and we've been unable to get it to treat hardlinks as anything other than separate files to be backed up alongside each other. In case it's relevant for possible solutions, I'd like to note that it's possible to tell a hardlink from a proper file by the filename: foobarbaz-123.ext # file foobarbaz-123-1.ext # hardlink foobarbaz-123-2.ext # hardlink barbazfoo-456.ext # file barbazfoo-456-1.ext # hardlink barbazfoo-456-2.ext # hardlink barbazfoo-456-3.ext # hardlink That is, all hardlinks have two hyphens in the filename, where as proper files have just the one. The server is running Ubuntu Linux, and the files are situated on a gfs volume on our SAN.

  Read the article

• Windows 8.1 unable to play Music or the Audio from videos through Optical Out

  - by Zion Fox

  I am having an issue with my audio output, where any music file, and the audio side of videos are not being played through my optical audio output. I am running a Realtek HD Audio device built on Revision 1.0 on a GA-P55A-UD6 Gigabyte Board, which runs through it's optical output to an Astro A40 Mixamp, which does some upscaling before sending it to the headset. Now, notification sounds, and sounds/videos/music played through the browser or programs like Skype or games are working fine. This seems to specifically effect Foobar2000 and Media Player Classic. I have updated these two programs to their latest revisions, in addition to the soundcard drivers to no avail, and searching the error code thrown by Foobar2000: Unrecoverable playback error: The parameter is incorrect. (0x80070057) through Google returns not very helpful results, other than the one potentially mentioning DRM. This issue I am having a very hard time resolving, and am wondering if anyone here has experienced similar issues after updating.

  Read the article

• External Hardrive Not Reconized on Windows 7 at all

  - by Bella

  I Have a NextStar 2/5" from Vantec and its an 80G HD. I have used it many times on windows xp and it works fine. We just recently upgraded to windows 7 home premium and when I plug it in it beeps many times. I've tried all the USB plugs in my computer and its not those plugs. Haven't tried eSata because it uses a weird cable to plug into. People told me that when it beeps everything is corrupted, but works fine on xp. I tried installing the drivers online from their website and when I try it asks me to put in a cd which makes no sense because they are online drivers. When I go into device manager nothing comes up, it just acts like the HD is invisible. The beeping will stop eventually as it is plugged in, but with no result.

  Read the article

• Does Juniper Networks provide keyloggers with their software?

  - by orokusaki

  I noticed that I had a "USB Mass Storage Device" plugged in when there wasn't in fact anything plugged in to any USB port. I turned it off via Windows (XP), but it's quite concerning. This was after installing Juniper Networks' software for VPN access to an IT guy's stuff. I also notice there is a service called "dsNcService.exe" which apparently is sending information over the internet (even when I'm not in VPN access). The process restarts itself when I end it. Should I be worried that this software is tracking my keystrokes and broadcasting them to my IT guy?

  Read the article

• Can't get PostgreSQL to run in Debian Lenny

  - by nuqqsa

  I'm trying to install PostgreSQL 8.3 on Debian Lenny (kernel 2.6.26-2-686) using the package manager: sudo apt-get install postgresql-8.3 postgresql-client-8.3 postgresql-contrib-8.3 postgresql-common When deploying the package postgresql-common, the following warning is displayed: supported_versions: WARNING: Unknown Debian release: 5.0.4 I wonder if this is related to the problem I describe below. Next I try to launch the database server but it doesn't have any effect, neither any logs are generated. sudo /etc/init.d/postgresql-8.3 start Does anybody have a clue of what might be going on?

  Read the article

• partitioning problems

  - by Remus Rigo

  I had on my laptop a dual system (Ubuntu 11.04 and Windows 7) and someway the partitions messed-up. Windows stopped from booting, I just got a blinking cursor, but Ubuntu worked fine. I tried to fix the windows boot (fixmbr, fixboot, bootsect /nt60 C:/....) but now grub was overwritten and I have no OS. Finally I formatted the hdd (low format), installed Windows, partition hdd with paragon partition manager and now I want to install Ubuntu, but Ubuntu sees an empty hdd, weird, can anyone tell me what can I do? EDIT: I have created: partition 1: 100MB ntfs - windows reserved (drive B) partition 2: 50GB ntfs win 7 (drive C) partition 3: 50GB ext3 linux partition 4: 'the rest' ntfs for data (drive E) (the swap i will create after)

  Read the article

• can't connect to Sql Sever Management Express 2012

  - by Rare-Man

  i installed Sql Sever Management Express 2012 , but when i try to connect in Sql management studio enviroment , i have this error . TITLE: Connect to Server Cannot connect to .. ADDITIONAL INFORMATION: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 2) For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&EvtSrc=MSSQLServer&EvtID=2&LinkId=20476 The system cannot find the file specified BUTTONS: OK ................................................................................... and in during installion i dont have option for select cluster !! this is my SQL Server Configuration Manager , my sql server service is empty ... And when get Remove a Failover Cluster Node , this error happened . http://oi57.tinypic.com/2lrvat.jpg

  Read the article

• Windows server 2008 R2 IIS7 file permissions

  - by StealthRT

  Hey all i am trying to figure out why i can not access a index.php file from within the wwwroot/mollify/backend directory. It keeps coming up with this: Server Error 403 - Forbidden: Access is denied. You do not have permission to view this directory or page using the credentials that you supplied. I've given all the permissions (Full control) to the wwwroot directory i could think of (IUSR, Guest, GUESTS, IIS_IUSRS, Users, Administrators, NETWORK, NETWORK SERVICE, SYSTEM, CREATOR OWNER & Everyone). I also added index.php to the "Default Document" under my website settings in IIS 7 manager. What else am i missing? Thanks! David

  Read the article

• Firefox: box mode?

  - by Peter Mortensen

  What is the "box mode" (for a lack of a better word) in Firefox? How can I exit it again? If I hold down the Ctrl key and left click while the cursor is over some element on a page it becomes boxed: Firefox seems to go into some special mode. What is this mode for? How can I go back to normal mode? Installed add-ons in Firefox: BetterPrivacy 1.29, NoScript 1.9.0.6 and SQLite Manager 0.4.7. (Microsoft .NET Framework Assistent 1.0 is disabled.) Platform: Firefox 3.0.6, Windows XP 64 bit SP2, 8 GB RAM.

  Read the article

• Why does storage's performance change at various queue depths?

  - by Mxx

  I'm in the market for a storage upgrade for our servers. I'm looking at benchmarks of various PCIe SSD devices and in comparisons I see that IOPS change at various queue depths. How can that be and why is that happening? The way I understand things is: I have a device with maximum (theoretical) of 100k IOPS. If my workload consistently produces 100,001 IOPS, I'll have a queue depth of 1, am I correct? However, from what I see in benchmarks some devices run slower at lower queue depths, then speedup at depth of 4-64 and then slow down again at even larger depths. Isn't queue depths a property of OS(or perhaps storage controller), so why would that affect IOPS?

  Read the article

• Nginx access log shows authenticated user "admin"

  - by bearcat

  I came across a line in my Nginx access log: 218.201.121.99 - admin [12/Dec/2012:18:33:18 +0800] "GET /manager/html HTTP/1.1" 444 0 "-" "-" Let me stress that there is only 1 record with this IP. Notice the authenticated user admin. After some googling, I was able to find out only that this is authenticated user (http://wiki.nginx.org/HttpCoreModule#.24remote_user), which was authenticated by the Auth Basic Module (http://wiki.nginx.org/HttpAuthBasicModule). However, nowhere in my site (configuration) do I use HTTP basic authentication. What is going on? How did it get there? Was the user authenticated?

  Read the article

• EFI Partition Types

  - by Will

  Another employee was working with a mounted VHD and was using diskpart on it and I'm not sure if he messed something up or not. I think it's fine but I wanted to double check. We have a Windows 2008 x64 machine that boots with EFI because of the large disks in the system. What should the different labels be within Disk Manager for this system? Here is what is currently set: 200 MB Partition - EFI System Partition C Partition - Boot, Page File, Crash Dump There should not be an active partition under EFI, correct? Also, is there supposed to be a "System" label in addition to "EFI System Partition"?

  Read the article

• What could cause my LAN Pings be greater than 100ms?

  - by James Holland

  I have 2 servers (Both: Windows Server 2008, Dual Xeon 2.8Ghz, 32GB RAM, 8 x 15k SAS Drives). One of them is a DC / Web server / Exchange Server, the other is a SQL Server (2008). I have a 48 port Netgear GS748T Gigabit switch. When I ping from server to server, I get ping times <1ms, great, but when I ping from a PC, I get varying pings from the occasional <1ms to 500ms!! If I log into either server and look at Task Manager, CPU usage peaks at 20%, memory usage is 100%, but I am led to believe this is normal as Exchange will just use as much as you have, and release it when requested. Network usage peaks at 1%. I really don't understand how the ping can vary that much. I know I am giving very little info, but this is all I know, I apologise, but can anyone help? In response to question, I have pinged by both IP address and hostname, no difference in ping times.

  Read the article

• ECMP Load Balancing in JUNOS

  - by SpacemanSpiff

  I'm trying to figure out how to use ECMP load balancing in JUNOS. I know this isn't the best way to load balance, but its quick and dirty and gets done what I need to. In ScreenOS this was pretty easy. Device: SRX220 JunOS: 10.3R2.11 Here's what I've got so far: routing-options { static { route 0.0.0.0/0 { next-hop [ 1.1.1.1 1.1.1.2 ]; metric 10; } } maximum-paths 2; Will that do it? Tom

  Read the article

• Changing default shortcut for Spaces on a Macbook Pro with Snow Leapord?

  - by Mahmoud Abdelkader

  I'm primarily a Linux user but my main home PC is a Macbook Pro with Snow Leopard. The concept of "Spaces" in a Mac is extremely important to how I utilize my development environments and I use this feature on Linux all the time. I use Compiz Manager for Ubuntu which allows me to "Desktop Switch" and navigate all desktops using the Ctrl+Alt+Arrow keys to a particular desktop. On a Mac, the process is similar, however, you're only given 3 non-customizable short-cuts: Option+Arrow, Ctrl+Arrow, and Alt+Arrow. How can I change the keyboard shortcut to take Ctrl+Option? The keys would then fit my working style and it won't feel awkward to remember two sets of keyboard shortcuts. Thanks! Mahmoud

  Read the article

• Moving my bcd from HDD to SSD - Windows 7

  - by lelouch

  I have windows 7 installed on my SSD, but the /boot/ and bootmgr are on my hard-drive. I want to move them to my SSD for faster booting times. So i figured that I can fix the problem using the Windows startup repair tool. I made a bootable windows 7 flash drive, and ran Windows startup repair. However, it exits with an error. I also can't see my OS in the list of installed OSs. I then tried fixing via the command prompt with bootrec /fixmbr, bootrec /fixboot, bootrec /rebuildbcd. Bootrec /rebuildbcd finds the OS, but gives me the error "The requested system device cannot be found" when i try fixing it. Does anyone know why this is failing? I read somewhere that the Windows Repair environment doesn't support a flash drive, which is why I'm getting that error. Is this true? Unforunately my dvd drive is playing up so I can't use it to test this.

  Read the article

• Xen 4.0.1 on Ubuntu 10.10 not booting

  - by Disco

  I'm trying to get Xen 4.0.1 run as dom0 on a fresh/clean install of 10.10 desktop (x64). Followed the step by step tutorial at http://wiki.xensource.com/xenwiki/Xen4.0 I have the pvops kernel in /boot, also included the ext4 fs support by recompiling the kernel by : make -j6 linux-2.6-pvops-config CONFIGMODE=menuconfig make -j6 linux-2.6-pvops-build make -j6 linux-2.6-pvops-install Here's my grub entry : menuentry 'Xen4' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod part_msdos insmod ext2 insmod ext3 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set 2bf3177a-92fd-4196-901a-da8d810b04b4 multiboot /xen-4.0.gz dom0_mem=1024M loglvl=all guest_loglvl=all module /vmlinuz-2.6.32.27 root=UUID=2bf3177a-92fd-4196-901a-da8d810b04b4 ro module /initrd.img-2.6.32.27 } blkid /dev/sda1 gives the : /dev/sda1: UUID="2bf3177a-92fd-4196-901a-da8d810b04b4" TYPE="ext3" My partition shemes is : /boot (ext3) / (ext4) Whatever option i've tried i end up with : mounting none on /dev failed: no such file or directory And message complaining that it cannot find the device with uuid ... It's taking my hairs out, if somone has a clue ...

  Read the article

• VPN Server Problem

  - by vikas-2007bajaj

  Hi, I have Configure VPN Server for Online share Trading. I have so many VPN Clients in my VPN Server. Sometimes my VPN Clients disconnected from Systems but it shows in system tray i.e. connected but we are not able to access my application on the server.Then I disabled my Local area connection on client machine but it doesn't effect until I restart my System again.Firstly I want to know Task Manager Service for my VPN Client & how this problem can be remove.Waiting for reply. Thanks, Vikas Bajaj

  Read the article

• Which driver for "ATI Mobility Radeon HD 3650" in a laptop?

  - by Lasse V. Karlsen

  We have some HP laptops here that comes equipped with a video card that identifies itself as "ATI Mobility Radeon HD 3650", like this one. However, which drivers do we choose? As far as we can tell, HD 3650 is desktop cards, or at least there are no drivers listed for that series with "Mobility" in their name. If I pick the following on the ATI Driver Download page: Graphics Windows Vista 32-bit Edition Mobility Radeon Then the dropdown for the card model contains X300, X600, X700, X800, X1300, X1400, X1600, X1800, 9600, 9700 and 9800 models, but no "HD" nor "36xx series". However, if I change to just "Radeon" for the last selection there, I can find a "Radeon HD 3600 Series" model in the list. Also, if I pick "Windows 7" as the operating system, I can find a "Mobility Radeon HD 3000 series" card, but no 3600. So, which one to pick? The main reason I ask is that they all seem to have some kind of problem installing, so neither seems to be the right one (they all crash with "Catalyst Install Manager has stopped working".)

  Read the article

• How do I use Compiz on Linux to achieve what WinSplit revolution does on Windows?

  - by Bryce Thomas

  Hi there, I've used WinSplit Revolution for quite some time on Windows and have become attached to it. I'm now trying out a Linux OS (Ubuntu 10.04) and would really like to get the same functionality back again. After searching on the net I found a "grid" plugin (http://wiki.compiz.org/Plugins/Grid) for compiz which says that it was inspired by WinSplit revolution. I haven't installed the Grid plugin yet, because under the install section on that page, it says "Note that grid is now included in compiz so you're unlikely to need to fetch from git unless you've an old version of compiz", which would seem to suggest that the grid functionality has now been built into compiz somewhere. The thing is, I don't know where to find it in the CompizConfig Settings Manager nor how to set it up. All I want to have happen is that I get identical functionality to WinSplit revolution, where I press Ctrl + Alt + [some numpad key] to position a window on a screen and press Ctrl + Alt + [left or right arrow] to shift a window between dual screens.

  Read the article

• (simple) linux HA with vmware vsphere?

  - by derhelge

  I hope my upcoming question is specific enough, and you are able and willing to support :-) We have several openSUSE VMs in an ESX-Cluster (three ESX-Servers) with an attached iSCSI-SAN. All of those Linux VMs are "single point of failure"-configured, which means in the case of a Web-Server: LAMP, storage, etc. everything on this machine. This was very simple and in case of a failure (in the last years: kernel panics or apache crashes) a simple reboot triggered by a script did it. But the problem is: How to upgrade/maintain the w(eb-)application or the underlying OS without downtime? This wasn't really managable and i did this in the early morning ;) How can i achieve a "simple" High-Availability Cluster now? I thought of: DRBD with heartbeat with 2 VMs. And for the storage a RDM (raw device mapped) LUN and change the read-write-permissions for both VMs. Is this a good idea? Anyone has a better solution?

  Read the article

• Wireless driver not detected by Windows 8

  - by rksh

  I've a problem in my wireless driver on windows 8. I bought a new X500L Asus laptop and installed windows 8 on it. However the driver CD I got with the laptop doesn't support my laptop. The CD says it's designed for Windows 8.1. I tired finding Wireless driver model and finding driver online and installing and that hasn't worked either, the wireless driver is shown at the device manager as not installed. I tired live booting the computer with a live CD of Linux and that also doesn't pick up my wireless driver. Can anyone tell me how to fix it? Thanks

  Read the article

• NFS-Root not working when booting over PXE

  - by Randy

  I am desperately trying to get a diskless client running over PXE-Boot using a NFS-Share as a root file system. I did this before some years ago but for some reason I am stucked at this since days. The TFTP-Server itself is running fine and booting a netinstaller works also fine. The kernel and initrd are loaded also but the bootprocess stops with this (screenshot) kernel panic. I'm using the squeeze standard i386-Kernel and I have prepared the initrd with this config: MODULES=most BUSYBOX=y KEYMAP=n COMPRESS=gzip BOOT=nfs DEVICE= NFSROOT=auto I also tried MODULES=netboot with the same outcome. My PXE-configuration looks like this: LABEL linux KERNEL diskless/debian-default/vmlinuz-2.6.32-5-686 APPEND root=/dev/nfs initrd=diskless/debian-default/vmlinuz-2.6.32-5-686 nfsroot=192.168.140.2:/storage/nfs-boot-images/default-squeeze ip=dhcp rw Furthermore I have captured the network communication of the client via tcpdump and learned that the client isn't even trying to connect to the NFS-share. Does anybody has got an idea what is going wrong here?

  Read the article

• Can't reconnect to my RDP session

  - by Jeremy Stein

  I use a VM through RDP. When I'm done for the day, I just disconnect the session and reconnect in the morning. That allows me to pick up what I was doing and not close all the applications. As I'm the only user, this generally works well. Today, I can't reconnect to my session from yesterday. When I RDP, I get a new session. When I run query user, I can see my other session: USERNAME SESSIONNAME ID STATE IDLE TIME LOGON TIME me rdp-tcp#82 1 Active 15:00 4/22/2010 9:00 AM me rdp-tcp#91 2 Active . 4/30/2010 9:00 AM If I try to use Terminal Services Manager to remote control the other session, I get this error: Session (ID 1) remote control failed (Error 7044 - The request to control another session remotely was denied. ) Is there any way to reconnect to this session, or do I need to just kill it?

  Read the article

< Previous Page | 465 466 467 468 469 470 471 472 473 474 475 476  | Next Page >