Search Results

Search found 12753 results on 511 pages for 'small'.

Page 469/511 | < Previous Page | 465 466 467 468 469 470 471 472 473 474 475 476  | Next Page >

• Webservice for uploading data: security considerations

  - by Philip Daubmeier

  Hi everyone! Im not sure about what authentification method I should use for my webservice. I've searched on SO, and found nothing that helped me. Preliminary Im building an application that uploads data from a local database to a server (running my webservice), where all records are merged and stored in a central database. I am currently binary serializing a DataTable, that holds a small fragment of the local database, where all uninteresting stuff is already filtered out. The byte[] (serialized DataTable), together with the userid and a hash of the users password is then uploaded to the webservice via SOAP. The application together with the webservice already work exactly like intended. The Problem The issue I am thinking about is now: What is if someone just sniffs the network traffic, 'steals' the users id and password hash to send his own SOAP message with modified data that corrupts my database? Options The approaches to solving that problem, I already thought of, are: Using ssl + certificates for establishing the connection: I dont really want to use ssl, I would prefer a simpler solution. After all, every information that is transfered to the webservice can be seen on the website later on. What I want to say is: there is no secret/financial/business-critical information, that has to be hidden. I think ssl would be sort of an overkill for that task. Encrypting the byte[]: I think that would be a performance killer, considering that the goal of the excercise was simply to authenticate the user. Hashing the users password together with the data: I kind of like the idea: Creating a checksum from the data, concatenating that checksum with the password-hash and hashing this whole thing again. That would assure the data was sent from this specific user, and the data wasnt modified. The actual question So, what do you think is the best approach in terms of meeting the following requirements? Rather simple solution (As it doesnt have to be super secure; no secret/business-critical information transfered) Easily implementable retrospectively (Dont want to write it all again :) ) Doesnt impact to much on performance What do you think of my prefered solution, the last one in the list above? Is there any alternative solution I didnt mention, that would fit better? You dont have to answer every question in detail. Just push me in the right direction. I very much appreciate every well-grounded opinion. Thanks in advance!

  Read the article

• Converting this code from ASP to PHP

  - by jethomas

  I'll admit I'm a novice programmer and really the only experience I have is in classic ASP. I'm looking for a way to convert this asp code to PHP. For a customer who only has access to a linux box but also as a learning tool for me. Thanks in advance for the help: Recordset and Function: Function pd(n, totalDigits) if totalDigits > len(n) then pd = String(totalDigits-len(n),"0") & n else pd = n end if End Function 'declare the variables Dim Connection Dim Recordset Dim SQL Dim SQLDate SQLDate = Year(Date)& "-" & pd(Month(Date()),2)& "-" & pd(Day(Date()),2) 'declare the SQL statement that will query the database SQL = "SELECT * FROM tblXYZ WHERE element_8 = 2 AND element_9 > '" & SQLDate &"'" 'create an instance of the ADO connection and recordset objects Set Connection = Server.CreateObject("ADODB.Connection") Set Recordset = Server.CreateObject("ADODB.Recordset") 'open the connection to the database Connection.Open "PROVIDER=MSDASQL;DRIVER={MySQL ODBC 5.1 Driver};SERVER=localhost;UID=xxxxx;PWD=xxxxx;database=xxxxx;Option=3;" 'Open the recordset object executing the SQL statement and return records Recordset.Open SQL,Connection Display page/loop: Dim counter counter = 0 While Not Recordset.EOF counter = counter + 1 response.write("<div><td width='200' valign='top' align='center'><a href='" & Recordset("element_6") & "' style='text-decoration: none;'><div id='ad_header'>" & Recordset("element_3") & "</div><div id='store_name' valign='bottom'>" & Recordset("element_5") & "</div><img id='photo-small-img' src='http://xyz.com/files/" & Recordset("element_7") & "' /><br /><div id='ad_details'>"& Recordset("element_4") & "</div></a></td></div>") Recordset.MoveNext If counter = 3 Then Response.Write("</tr><tr>") counter = 0 End If Wend

  Read the article

• This code appears to achieve the return of a null reference in C++

  - by Chuck

  Hi folks, My C++ knowledge is somewhat piecemeal. I was reworking some code at work. I changed a function to return a reference to a type. Inside, I look up an object based on an identifier passed in, then return a reference to the object if found. Of course I ran into the issue of what to return if I don't find the object, and in looking around the web, many people claim that returning a "null reference" in C++ is impossible. Based on this advice, I tried the trick of returning a success/fail boolean, and making the object reference an out parameter. However, I ran into the roadblock of needing to initialize the references I would pass as actual parameters, and of course there is no way to do this. I retreated to the usual approach of just returning a pointer. I asked a colleague about it. He uses the following trick quite often, which is accepted by both a recent version of the Sun compiler and by gcc: MyType& someFunc(int id) { // successful case here: // ... // fail case: return *static_cast<MyType*>(0); } // Use: ... MyType& mt = somefunc(myIdNum); if (&mt) // test for "null reference" { // whatever } ... I have been maintaining this code base for a while, but I find that I don't have as much time to look up the small details about the language as I would like. I've been digging through my reference book but the answer to this one eludes me. Now, I had a C++ course a few years ago, and therein we emphasized that in C++ everything is types, so I try to keep that in mind when thinking things through. Deconstructing the expression: "*static_cast(0);", it indeed seems to me that we take a literal zero, cast it to a pointer to MyType (which makes it a null pointer), and then apply the dereferencing operator in the context of assigning to a reference type (the return type), which should give me a reference to the same object pointed to by the pointer. This sure looks like returning a null reference to me. Any advice in explaining why this works (or why it shouldn't) would be greatly appreciated. Thanks, Chuck

  Read the article

• Directly Jump to another C++ function

  - by maligree

  I'm porting a small academic OS from TriCore to ARM Cortex (Thumb-2 instruction set). For the scheduler to work, I sometimes need to JUMP directly to another function without modifying the stack nor the link register. On TriCore (or, rather, on tricore-g++), this wrapper template (for any three-argument-function) works: template< class A1, class A2, class A3 > inline void __attribute__((always_inline)) JUMP3( void (*func)( A1, A2, A3), A1 a1, A2 a2, A3 a3 ) { typedef void (* __attribute__((interrupt_handler)) Jump3)( A1, A2, A3); ( (Jump3)func )( a1, a2, a3 ); } //example for using the template: JUMP3( superDispatch, this, me, next ); This would generate the assembler instruction J (a.k.a. JUMP) instead of CALL, leaving the stack and CSAs unchanged when jumping to the (otherwise normal) C++ function superDispatch(SchedulerImplementation* obj, Task::Id from, Task::Id to). Now I need an equivalent behaviour on ARM Cortex (or, rather, for arm-none-linux-gnueabi-g++), i.e. generate a B (a.k.a. BRANCH) instruction instead of BLX (a.k.a. BRANCH with link and exchange). But there is no interrupt_handler attribute for arm-g++ and I could not find any equivalent attribute. So I tried to resort to asm volatile and writing the asm code directly: template< class A1, class A2, class A3 > inline void __attribute__((always_inline)) JUMP3( void (*func)( A1, A2, A3), A1 a1, A2 a2, A3 a3 ) { asm volatile ( "mov.w r0, %1;" "mov.w r1, %2;" "mov.w r2, %3;" "b %0;" : : "r"(func), "r"(a1), "r"(a2), "r"(a3) : "r0", "r1", "r2" ); } So far, so good, in my theory, at least. Thumb-2 requires function arguments to be passed in the registers, i.e. r0..r2 in this case, so it should work. But then the linker dies with undefined reference to `r6' on the closing bracket of the asm statement ... and I don't know what to make of it. OK, I'm not the expert in C++, and the asm syntax is not very straightforward... so has anybody got a hint for me? A hint to the correct __attribute__ for arm-g++ would be one way, a hint to fix the asm code would be another. Another way maybe would be to tell the compiler that a1..a3 should already be in the registers r0..r2 when the asm statement is entered (I looked into that a bit, but did not find any hint).

  Read the article

• Between-request Garbage Collection using Passenger

  - by raphaelcm

  We're using Rails 3.0.7 and REE 1.8.7. Long-term, we will be upgrading, but at the moment it's not feasible. Following the advice of several blog posts, we've been tuning our GC, and have settings that work pretty well. But we would really like to run GC outside of the request-response cycle. I've tried patching Passenger per this post, and using the code supplied in this SO question. In both cases, GC does indeed happen between requests. However, every time the between-request GC happens, I see a bunch of this: MONGODB [INFO] Connecting... MONGODB admin['$cmd'].find({:ismaster=>1}).limit(-1) MONGODB admin['$cmd'].find({:ismaster=>1}).limit(-1) MONGODB admin['$cmd'].find({:ismaster=>1}).limit(-1) Starting the New Relic Agent. Installed New Relic Browser Monitoring middleware SQL (0.0ms) SHOW TABLES SQL (0.0ms) SHOW TABLES RefinerySetting Load (0.0ms) SELECT `refinery_settings`.* FROM `refinery_settings` WHERE `refinery_settings`.`scoping` = 'pages' AND `refinery_settings`.`name` = 'use_marketable_urls' LIMIT 1 SQL (0.0ms) BEGIN RefinerySetting Load (0.0ms) SELECT `refinery_settings`.* FROM `refinery_settings` WHERE `refinery_settings`.`id` = 1 LIMIT 1 AREL (0.0ms) UPDATE `refinery_settings` SET `value` = '--- \"false\"\n', `callback_proc_as_string` = NULL WHERE `refinery_settings`.`id` = 1 SQL (0.0ms) SHOW TABLES RefinerySetting Load (0.0ms) SELECT `refinery_settings`.* FROM `refinery_settings` SQL (0.0ms) COMMIT SQL (0.0ms) SHOW TABLES RefinerySetting Load (4.0ms) SELECT `refinery_settings`.* FROM `refinery_settings` WHERE `refinery_settings`.`scoping` IS NULL AND `refinery_settings`.`name` = 'user_image_sizes' LIMIT 1 SQL (0.0ms) BEGIN RefinerySetting Load (0.0ms) SELECT `refinery_settings`.* FROM `refinery_settings` WHERE `refinery_settings`.`id` = 17 LIMIT 1 AREL (0.0ms) UPDATE `refinery_settings` SET `value` = '--- \n:small: 120x120>\n:medium: 280x280>\n:large: 580x580>\n', `callback_proc_as_string` = NULL WHERE `refinery_settings`.`id` = 17 SQL (0.0ms) SHOW TABLES RefinerySetting Load (0.0ms) SELECT `refinery_settings`.* FROM `refinery_settings` SQL (0.0ms) COMMIT ******** Engine Extend: app/helpers/blog_posts_helper SQL (0.0ms) SHOW TABLES SQL (0.0ms) SHOW TABLES SQL (0.0ms) SHOW TABLES SQL (4.0ms) SHOW TABLES SQL (0.0ms) SHOW TABLES SQL (0.0ms) SHOW TABLES SQL (0.0ms) SHOW TABLES ******** Engine Extend: app/models/user SQL (0.0ms) describe `roles_users` SQL (0.0ms) SHOW TABLES SQL (0.0ms) SHOW TABLES SQL (4.0ms) describe `roles_users` SQL (0.0ms) SHOW TABLES SQL (4.0ms) SHOW TABLES SQL (0.0ms) SHOW TABLES SQL (0.0ms) SHOW TABLES (etc, etc, etc) Which is what happens when rails "loads the world" when the app starts up. Basically, GC.start is re-loading the app for some reason. Because of this, between-request GC is much slower than inline GC. Is there a way around this? I would love to have snappy, between-request GC if possible. Thanks.

  Read the article

• JList with JScrollPane and prototype cell value wraps element names (replaces with dots instead of s

  - by Tom

  I've got a Jlist inside a JScrollPane and I've set a prototype value so that it doesn't have to calculate the width for big lists, but just uses this default width. Now, the problem is that the Jlist is for some reason replacing the end of an element with dots (...) so that a horizontal scrollbar will never be shown. How do I disable with "wrapping"? So that long elements are not being replaced with dots if they are wider than the Jlist's width? I've reproduced the issue in a small example application. Please run it if you don't understand what I mean: import javax.swing.*; import java.awt.*; public class Test { //window private static final int windowWidth = 450; private static final int windowHeight = 500; //components private JFrame frame; private JList classesList; private DefaultListModel classesListModel; public Test() { load(); } private void load() { //create window frame = new JFrame("Test"); frame.setSize(windowWidth, windowHeight); frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE); frame.setUndecorated(true); frame.getRootPane().setWindowDecorationStyle(JRootPane.PLAIN_DIALOG); //classes list classesListModel = new DefaultListModel(); classesList = new JList(classesListModel); classesList.setPrototypeCellValue("prototype value"); classesList.setSelectionMode(ListSelectionModel.SINGLE_SELECTION); classesList.setVisibleRowCount(20); JScrollPane scrollClasses = new JScrollPane(classesList, JScrollPane.VERTICAL_SCROLLBAR_AS_NEEDED, JScrollPane.HORIZONTAL_SCROLLBAR_AS_NEEDED); for (int i = 0; i < 200; i++) { classesListModel.addElement("this is a long string, does not fit in width"); } //panel JPanel drawingArea = new JPanel(); drawingArea.setBackground(Color.white); drawingArea.add(scrollClasses); frame.add(drawingArea); //set visible frame.setVisible(true); } } Even if you force horizontal scrollbar, you still won't be able to scroll because the element is actually not wider than the width because of the dot (...) wrapping. Thanks in advance.

  Read the article

• jQuery replacing an image inside a .net datalist

  - by user359409

  (submit said I was trying to post an image so I've changed image everywhere to ix I am trying to get jQuery to replace an ix inside a datalist. The original ix is the thumbnail ix of a product on a category page. The small ix I am clicking on are swatch ix for the different colors of a product. I can get it to work using a div tag around the ix tag inside the ItemTemplate. I don't need to use a div tag if I can get the imagesx to swap- I was just using it because that is sample code I found and it works for the first product in the category. <asp:HyperLink ID="ProductNav" runat="server" NavigateUrl='<%#Eval("NavigateUrl") %>'> <div id="ladiv" runat="server"> <asp:Ixx runat="server" ID="ProdThumb" /> </div> </asp:HyperLink> <asp:PlaceHolder ID="phSwatches" runat="server"></asp:PlaceHolder> The ProdThumb ix is added from the code behind and the swatches are added from the code behind swatches.Controls.Add(new LiteralControl("<table><tr>")); foreach(OptionChoice optionChoice in option.Choices) { string swatchThumbnail = string.Format("<ix ID=\"{0}\" src=\"{1}\" border=\"0\" class=\"{2}\" />","swatch" + optionChoice.OptionChoiceId.ToString(), ResolveUrl(optionChoice.ThumbnailUrl),"imgthumb"); swatches.Controls.Add(new LiteralControl("<td>")); swatches.Controls.Add(new LiteralControl(swatchThumbnail)); swatches.Controls.Add(new LiteralControl("</td>")); } swatches.Controls.Add(new LiteralControl("</tr></table>")); prodThumb.IxUrl = product.ThumbnailUrl; prodThumb.AlternateText = product.ThumbnailAltText; prodThumb.CssClass = "Thumbnail"; The jQuery is: $(function() { $("ix.imgthumb").click(function(e) { var t = $(this); var newImg = ''; $('#ladiv') .html($(newImg) ); }); }); </script> Both images are named similar, except the swatch contains "sws" and the larger one is the some only with "swl". I have spent several days searching but am not able to get it to work. If I try something like $("#<%=ladiv.ClientID %") the code can't find it. I appreciate any help.

  Read the article

• How do I add "Press any key to boot from usb" when installing Windows from a flash drive? (Grub4dos question / how to remove a bootloader)

  - by Vincent

  Hi there! I've been struggling with this problem for a while now and finially decided to ask for help. Let me first explain what the main purpose of the app is: to provide the a very easy to use way of backing up files, after which I format the drive and start Windows 7 setup. I do this by booting WinPE, which runs a script to detect Windows installations and then opens a file browser. After the file browser is closed, the script continues and formats the drive that contains the Windows installation, and starts an unattended Windows 7 install. Now here is the problem: When you start Windows setup or WinPE from a dvd, you get a nice option to "Press any key to boot from DVD". This is to prevent the computer from booting the DVD when the first phase of the installation is complete and the computer reboots. However, when booting from a flash drive, Windows does not provide this option: it simply boots the flash drive every reboot. To replicate the "press any key" function, I installed Grub4Dos, which works great. It provides a small menu, the first standard item being "Continue installation", the second being "start installation". After quite a lot of tweaking, I got everything working: Start installation starts WinPE, which in turn starts the Windows installation. At first reboot, the Grub4Dos menu comes up, counts 5 seconds and boots the second stage of the installation. Here, I am greeted with the error: "Windows setup could not configure windows to run on this computer's hardware." When I boot into WinPE the normal way (put the bootmgr on the stick root) and change my bios to boot from the primary hdd after first reboot, I don't get this error. I've been looking around, and the only thing I could find was that the BIOS automatically names the boot device hd0, and that Windows can only be run / installed to hd 0. I'm not sure if this is the problem. I read about remapping to solve this problem, but to do that you have to know the phisical location of the hard drive and partition, like hd(0,1). I want this flash drive to work on any PC, regardless of where the OS is installed, so that's not really a possibility. A possible fix I thought of is removing the bootloader from the flash drive when I'm in WinPE. That way, when the pc reboots the BIOS will not see the flash drive as a boot drive and instead boot the primary hdd. I have yet to find a way to do this. Thank you for reading my question, and if you have any suggestion, please do.

  Read the article

• How can I run an android frame animation without it skewing?

  - by GameDev123

  I have a small state machine that runs a series of frame by frame animations in an ImageView, in a nested hierarchy of layouts. There is more than adequate space to display each frame of the animation. Each frame of the animation is cropped to fit the minimum amount of area, in order to save memory. If a frame only contains 50x50 worth of pixels then the png is 50x50. There is no transparent padding to keep them the same size. The ImageView is directly within a RelativeLayout, and is anchored to the bottom left with some padding. The general idea being that the character in the animation performs some action, which results in individual frames of the animation growing or shrinking. The issue is that individual frames of animation are skewed, and there does not appear to be any way of preventing this. If I set the source of the imageview directly to one of the frames of animation, it displays fine in the layout manager. I have tried this with Adjust View Bounds set to true, false, and undefined. I have tried using the background and the src attribute of imageview to set the animation drawable, I have tried every configuration of layout manager and setting minimum/maximum size that I can think of, and it still stretches the character on various frames depending on the size of the source png. In essence, all I want to do is say "I want this ImageView to anchor in the bottom left and then display any frame that happens to be in it without stretching or skewing it in any way aside from that which occurred when the frame png's were loaded." Seems simple, but I have yet to come across any way of doing it. Here is the layout of the imageview as of my last test, I had to remove bits of the XML to get it to display but nothing pertinent: RelativeLayout android:orientation="horizontal" android:layout_above="@+id/MenuOptions" android:layout_width="fill_parent" android:id="@+id/AnimationLayout" android:clipChildren="false" android:minHeight="180dp" android:layout_height="fill_parent" android:layout_below="@+id/GameBarLayout" ImageView android:id="@+id/animatedImg" android:layout_height="wrap_content" android:layout_width="wrap_content" android:visibility="visible" android:baselineAlignBottom="true" android:minHeight="180dp" android:minWidth="200dp" android:adjustViewBounds="true" android:layout_alignParentBottom="true" android:paddingLeft="30dp" android:paddingBottom="10dp" android:src="@drawable/idle01"/ImageView /RelativeLayout Here is how an animation is set up: animationDrawable = new AnimationDrawable(); animationDrawable.addFrame(res.getDrawable(R.drawable.idle01), 16); animationDrawable.addFrame(res.getDrawable(R.drawable.idle02), 16); animationDrawable.addFrame(res.getDrawable(R.drawable.idle03), 16);

  Read the article

• Execution plan issue requires reset on SQL Server 2005, how to determine cause?

  - by Tony Brandner

  We have a web application that delivers training to thousands of corporate students running on top of SQL Server 2005. Recently, we started seeing that a single specific query in the application went from 1 second to about 30 seconds in terms of execution time. The application started throwing timeouts in that area. Our first thought was that we may have incorrect indexes, so we reviewed the tables and indexes. However, similar queries elsewhere in the application also run quickly. Reviewing the indexes showed us that they were configured as expected. We were able to narrow it down to a single query, not a stored procedure. Running this query in SQL Studio also runs quickly. We tried running the application in a different server environment. So a different web server with the same query, parameters and database. The query still ran slow. The query is a fairly large one related to determining a student's current list of training. It includes joins and left joins on a dozen tables and subqueries. A few of the tables are fairly large (hundreds of thousands of rows) and some of the other tables are small lookup tables. The query uses a grouping clause and a few where conditions. A few of the tables are quite active and the contents change often but the volume of added rows doesn't seem extreme. These symptoms led us to consider the execution plan. First off, as soon as we reset the execution plan cache with the SQL command 'DBCC FREEPROCCACHE', the problem went away. Unfortunately, the problem started to reoccur within a few days. The problem has continued to plague us for awhile now. It's usually the same query, but we did appear to see the problem occur in another single query recently. It happens enough to be a nuisance. We're having a heck of a time trying to fix it since we can't reproduce it in any other environment other than production. I have downloaded the High Availability guide from Red Gate and I read up more on execution plans. I hope to run the profiler on the live server, but I'm a bit concerned about impact. I would like to ask - what is the best way to figure out what is triggering this problem? Has anyone else seen this same issue?

  Read the article

• Query performs poorly unless a temp table is used

  - by Paul McLoughlin

  The following query takes about 1 minute to run, and has the following IO statistics: SELECT T.RGN, T.CD, T.FUND_CD, T.TRDT, SUM(T2.UNITS) AS TotalUnits FROM dbo.TRANS AS T JOIN dbo.TRANS AS T2 ON T2.RGN=T.RGN AND T2.CD=T.CD AND T2.FUND_CD=T.FUND_CD AND T2.TRDT<=T.TRDT JOIN TASK_REQUESTS AS T3 ON T3.CD=T.CD AND T3.RGN=T.RGN AND T3.TASK = 'UPDATE_MEM_BAL' GROUP BY T.RGN, T.CD, T.FUND_CD, T.TRDT (4447 row(s) affected) Table 'TRANSACTIONS'. Scan count 5977, logical reads 7527408, physical reads 0, read-ahead reads 0, lob logical reads 0, lob physical reads 0, lob read-ahead reads 0. Table 'TASK_REQUESTS'. Scan count 1, logical reads 11, physical reads 0, read-ahead reads 0, lob logical reads 0, lob physical reads 0, lob read-ahead reads 0. SQL Server Execution Times: CPU time = 58157 ms, elapsed time = 61437 ms. If I instead introduce a temporary table then the query returns quickly and performs less logical reads: CREATE TABLE #MyTable(RGN VARCHAR(20) NOT NULL, CD VARCHAR(20) NOT NULL, PRIMARY KEY([RGN],[CD])); INSERT INTO #MyTable(RGN, CD) SELECT RGN, CD FROM TASK_REQUESTS WHERE TASK='UPDATE_MEM_BAL'; SELECT T.RGN, T.CD, T.FUND_CD, T.TRDT, SUM(T2.UNITS) AS TotalUnits FROM dbo.TRANS AS T JOIN dbo.TRANS AS T2 ON T2.RGN=T.RGN AND T2.CD=T.CD AND T2.FUND_CD=T.FUND_CD AND T2.TRDT<=T.TRDT JOIN #MyTable AS T3 ON T3.CD=T.CD AND T3.RGN=T.RGN GROUP BY T.RGN, T.CD, T.FUND_CD, T.TRDT (4447 row(s) affected) Table 'Worktable'. Scan count 5974, logical reads 382339, physical reads 0, read-ahead reads 0, lob logical reads 0, lob physical reads 0, lob read-ahead reads 0. Table 'TRANSACTIONS'. Scan count 4, logical reads 4547, physical reads 0, read-ahead reads 0, lob logical reads 0, lob physical reads 0, lob read-ahead reads 0. Table '#MyTable________________________________________________________________000000000013'. Scan count 1, logical reads 2, physical reads 0, read-ahead reads 0, lob logical reads 0, lob physical reads 0, lob read-ahead reads 0. SQL Server Execution Times: CPU time = 1420 ms, elapsed time = 1515 ms. The interesting thing for me is that the TASK_REQUEST table is a small table (3 rows at present) and statistics are up to date on the table. Any idea why such different execution plans and execution times would be occuring? And ideally how to change things so that I don't need to use the temp table to get decent performance? The only real difference in the execution plans is that the temp table version introduces an index spool (eager spool) operation.

  Read the article

• Domain-Driven-Design question

  - by Michael

  Hello everyone, I have a question about DDD. I'm building a application to learn DDD and I have a question about layering. I have an application that works like this: UI layer calls = Application Layer - Domain Layer - Database Here is a small example of how the code looks: //****************UI LAYER************************ //Uses Ioc to get the service from the factory. //This factory would be in the MyApp.Infrastructure.dll IImplementationFactory factory = new ImplementationFactory(); //Interface and implementation for Shopping Cart service would be in MyApp.ApplicationLayer.dll IShoppingCartService service = factory.GetImplementationFactory<IShoppingCartService>(); //This is the UI layer, //Calling into Application Layer //to get the shopping cart for a user. //Interface for IShoppingCart would be in MyApp.ApplicationLayer.dll //and implementation for IShoppingCart would be in MyApp.Model. IShoppingCart shoppingCart = service.GetShoppingCartByUserName(userName); //Show shopping cart information. //For example, items bought, price, taxes..etc ... //Pressed Purchase button, so even for when //button is pressed. //Uses Ioc to get the service from the factory again. IImplementationFactory factory = new ImplementationFactory(); IShoppingCartService service = factory.GetImplementationFactory<IShoppingCartService>(); service.Purchase(shoppingCart); //**********************Application Layer********************** public class ShoppingCartService : IShoppingCartService { public IShoppingCart GetShoppingCartByUserName(string userName) { //Uses Ioc to get the service from the factory. //This factory would be in the MyApp.Infrastructure.dll IImplementationFactory factory = new ImplementationFactory(); //Interface for repository would be in MyApp.Infrastructure.dll //but implementation would by in MyApp.Model.dll IShoppingCartRepository repository = factory.GetImplementationFactory<IShoppingCartRepository>(); IShoppingCart shoppingCart = repository.GetShoppingCartByUserName(username); //Do shopping cart logic like calculating taxes and stuff //I would put these in services but not sure? ... return shoppingCart; } public void Purchase(IShoppingCart shoppingCart) { //Do Purchase logic and calling out to repository ... } } I've seem to put most of my business rules in services rather than the models and I'm not sure if this is correct? Also, i'm not completely sure if I have the laying correct? Do I have the right pieces in the correct place? Also should my models leave my domain model? In general I'm I doing this correct according DDD? Thanks!

  Read the article

• Yet another Memory Leak Issue (memory is still gone when program terminates)- C program on SLES

  - by user1426181

  I run my C program on Suse Linux Enterprise that compresses several thousand large files (between 10MB and 100MB in size), and the program gets slower and slower as the program runs (it's running multi-threaded with 32 threads on a Intel Sandy Bridge board). When the program completes, and it's run again, it's still very slow. When I watch the program running, I see that the memory is being depleted while the program runs, which you would think is just a classic memory leak problem. But, with a normal malloc()/free() mismatch, I would expect all the memory to return when the program terminates. But, most of the memory doesn't get reclaimed when the program completes. The free or top command shows Mem: 63996M total, 63724M used, 272M free when the program is slowed down to a halt, but, after the termination, the free memory only grows back to about 3660M. When the program is rerun, the free memory is quickly used up. The top program only shows that the program, while running, is using at most 4% or so of the memory. I thought that it might be a memory fragmentation problem, but, I built a small test program that simulates all the memory allocation activity in the program (many randomized aspects were built in - size/quantity), and it always returns all the memory upon completion. So, I don't think that's it. Questions: Can there be a malloc()/free() mismatch that will lose memory permanently, i.e. even after the process completes? What other things in a C program (not C++) can cause permanent memory loss, i.e. after the program completes, and even the terminal window closes? Only a reboot brings the memory back. I've read other posts about files not being closed causing problems, but, I don't think I have that problem. Is it valid to be looking at top and free for the memory statistics, i.e. do they accurately describe the memory situation? They do seem to correspond to the slowness of the program. If the program only shows a 4% memory usage, will something like valgrind find this problem?

  Read the article

• Need MYSQL query for finding lowest score per game player

  - by Chris Barnhill

  I have a game on Facebook called Rails Across Europe. I have a Best Scores page where I show the players with the best 20 scores, which in game terms refers to the lowest winning turn. The problem is that there are a small number of players who play frequently, and their scores dominate the page. I'd like to make the scores page open to more players. So I thought that I could display the single lowest winning turn for each player instead of displaying all of the lowest winning turns for all players. The problem is that the query for this eludes me. So I hope that one of you brilliant StackOverflow folks can help me with this. I have included the relevant MYSQL table schemas below. Here are the the table relationships: player_stats contains statistics for either a game in progress or a completed game. If a game is in progress, winning_turn is zero (which means that games with a winning_turn of zero should not be included in the query). player_stats has a game_player table id reference. game_player contains data describing games currently in progress. game_player has a player table id reference. player contains data describing a person who plays the game. Here's the query I'm currently using: 'SELECT p.fb_user_id, ps.winning_turn, gp.difficulty_level, c.name as city_name, g.name as goods_name, d.cost FROM game_player as gp, player as p, player_stats as ps, demand as d, city as c, goods as g WHERE p.status = "ACTIVE" AND gp.player_id = p.id AND ps.game_player_id = gp.id AND d.id = ps.highest_demand_id AND c.id = d.city_id AND g.id = d.goods_id AND ps.winning_turn > 0 ORDER BY ps.winning_turn ASC, d.cost DESC LIMIT '.$limit.';'; Here are the relevant table schemas: -- -- Table structure for table `player_stats` -- CREATE TABLE IF NOT EXISTS `player_stats` ( `id` int(11) NOT NULL auto_increment, `game_player_id` int(11) NOT NULL, `winning_turn` int(11) NOT NULL, `highest_demand_id` int(11) NOT NULL, PRIMARY KEY (`id`), KEY `game_player_id` (`game_player_id`,`highest_demand_id`) ) ENGINE=InnoDB DEFAULT CHARSET=utf8 AUTO_INCREMENT=3814 ; -- -- Table structure for table `game_player` -- CREATE TABLE IF NOT EXISTS `game_player` ( `id` int(10) unsigned NOT NULL auto_increment, `game_id` int(10) unsigned NOT NULL, `player_id` int(10) unsigned NOT NULL, `player_number` int(11) NOT NULL, `funds` int(10) unsigned NOT NULL, `turn` int(10) unsigned NOT NULL, `difficulty_level` enum('STANDARD','ADVANCED','MASTER','ULTIMATE') NOT NULL, `date_last_used` datetime NOT NULL, PRIMARY KEY (`id`), KEY `game_id` (`game_id`,`player_id`) ) ENGINE=InnoDB DEFAULT CHARSET=utf8 AUTO_INCREMENT=3814 ; -- -- Table structure for table `player` -- CREATE TABLE IF NOT EXISTS `player` ( `id` int(11) NOT NULL auto_increment, `fb_user_id` char(255) NOT NULL, `fb_proxied_email` text NOT NULL, `first_name` char(255) NOT NULL, `last_name` char(255) NOT NULL, `birthdate` date NOT NULL, `date_registered` datetime NOT NULL, `date_last_logged_in` datetime NOT NULL, `status` enum('ACTIVE','SUSPENDED','CLOSED') NOT NULL, PRIMARY KEY (`id`), KEY `fb_user_id` (`fb_user_id`) ) ENGINE=InnoDB DEFAULT CHARSET=utf8 AUTO_INCREMENT=1646 ;

  Read the article

• add limited product to cart in android

  - by user1859172

  I have to develop one shopping cart app. Here i have to add the product only 5.otherwise have to display the message on alert dialog like 5 products only allowed. How can i develop this.please help me This is my code: ImageButton mImgAddCart = (ImageButton) findViewById(R.id.img_add); mImgAddCart.setOnClickListener(new OnClickListener() { public void onClick(View v) { // TODO Auto-generated method stub mTitle = txttitle.getText().toString(); mCost = text_cost_code.getText().toString(); mCost = mCost.replace("From ", ""); mTotal = txt_total.getText().toString(); mTotal = mTotal.replace("From ", ""); mQty = edit_qty_code.getText().toString(); if (Constants.mItem_Detail.size() <= 0) { HashMap<String, String> mTempObj = new HashMap<String, String>(); mTempObj.put(KEY_TITLE, mTitle); mTempObj.put(KEY_QTY, mQty); mTempObj.put(KEY_COST, mCost); mTempObj.put(KEY_TOTAL, mTotal); Constants.mItem_Detail.add(mTempObj); } else { for (int i = 0; i < Constants.mItem_Detail.size(); i++) { if (Constants.mItem_Detail.get(i).get(KEY_TITLE) .equals(mTitle)) { Constants.mItem_Detail.remove(i); break; } else { } } HashMap<String, String> mTempObj = new HashMap<String, String>(); mTempObj.put(KEY_TITLE, mTitle); mTempObj.put(KEY_QTY, mQty); mTempObj.put(KEY_COST, mCost); mTempObj.put(KEY_TOTAL, mTotal); Constants.mItem_Detail.add(mTempObj); } AlertDialog.Builder alertdialog = new AlertDialog.Builder( Small.this); alertdialog.setTitle(getResources() .getString(R.string.app_name)); alertdialog.setMessage("Add in ViewCart"); alertdialog.setPositiveButton("OK", new DialogInterface.OnClickListener() { @Override public void onClick(DialogInterface dialog, int which) { // TODO Auto-generated method stub finish(); } }); alertdialog.show(); } }); How can i set the condition for this.please give me one idea.

  Read the article

• Haskell Add Function Return to List Until Certain Length

  - by kienjakenobi

  I want to write a function which takes a list and constructs a subset of that list of a certain length based on the output of a function. If I were simply interested in the first 50 elements of the sorted list xs, then I would use fst (splitAt 50 (sort xs)). However, the problem is that elements in my list rely on other elements in the same list. If I choose element p, then I MUST also choose elements q and r, even if they are not in the first 50 elements of my list. I am using a function finderFunc which takes an element a from the list xs and returns a list with the element a and all of its required elements. finderFunc works fine. Now, the challenge is to write a function which builds a list whose total length is 50 based on multiple outputs of finderFunc. Here is my attempt at this: finish :: [a] -> [a] -> [a] --This is the base case, which adds nothing to the final list finish [] fs = [] --The function is recursive, so the fs variable is necessary so that finish -- can forward the incomplete list to itself. finish ps fs -- If the final list fs is too small, add elements to it | length fs < 50 && length (fs ++ newrs) <= 50 = fs ++ finish newps newrs -- If the length is met, then add nothing to the list and quit | length fs >= 50 = finish [] fs -- These guard statements are currently lacking, not the main problem | otherwise = finish [] fs where --Sort the candidate list sortedps = sort ps --(finderFunc a) returns a list of type [a] containing a and all the -- elements which are required to go with it. This is the interesting -- bit. rs is also a subset of the candidate list ps. rs = finderFunc (head sortedps) --Remove those elements which are already in the final list, because -- there can be overlap newrs = filter (`notElem` fs) rs --Remove the elements we will add to the list from the new list -- of candidates newps = filter (`notElem` rs) ps I realize that the above if statements will, in some cases, not give me a list of exactly 50 elements. This is not the main problem, right now. The problem is that my function finish does not work at all as I would expect it to. Not only does it produce duplicate elements in the output list, but it sometimes goes far above the total number of elements I want to have in the list. The way this is written, I usually call it with an empty list, such as: finish xs [], so that the list it builds on starts as an empty list.

  Read the article

• Keeping Velocity Constant and Player in Position - Sidescrolling

  - by user2904951

  I'm working on a Little Mobile Game with Cocos2D-X and Box2D. The Point where I got stuck is the movement of a box2d-body (the main actor) and the according Sprite. Now I want to : move this Body with a constant velocity along the x-axis, no matter if it's rolling (it's a circleshape) upwards or downwards keep the body nearly sticking to the ground on which it's rolling keep the Body and the according Sprite in the Center of the Screen. What I tried : in the update()- method I used body->SetLinearVelocity(b2Vec2(x,y)) to higher/lower values, if the Body was passing a constant value for his velocity I used to set very high y-Values in body->SetLinearVelocity(b2Vec2(x,y)) First tried to use CCFollow with my playerSprite, which was also Scrolling along the y-axis, as i only need to scroll along the x-axis, so I decided to move the whole layer which is containing the ambience (platforms etc.) to the left of my Screen and my Player Body & Player sprite to the right of the Screen, adjusting the speed values to Keep the Player in the Center of the Screen. Well... ...didn't work as i wanted it to, because each time i set the velocity manually (I also tried to use body->applyLinearImpulse(...) when the Body is moving upwards just as playing around with the value of velocityIterations in world->Step(...)) there's a small delay, which pushes the player Body more or less further of the Center of the Screen. ... didn't also work as I expected it to, because I needed to adjust the x-Values, when the Body was moving upwards to Keep it not getting slowed down, this made my Body even less sticky to the ground.... ... CCFollow did a good Job, except that I didn't want to scroll along the y-axis also and it Forces the overgiven sprite to start in the Center of the Screen. Moving the whole Layer even brought no good results, I have tried a Long time to adjust values of the movement Speed of the layer and the Body to Keep it negating each other, that the player stays nearly in the Center of the Screen.... So my question is : Does anyone of you have any Kind of new Approach for me to solve this cohesive bunch of Problems ? Cheers, Seb

  Read the article

• SQL Design Question regarding schema and if Name value pair is the best solution

  - by Aur

  I am having a small problem trying to decide on database schema for a current project. I am by no means a DBA. The application parses through a file based on user input and enters that data in the database. The number of fields that can be parsed is between 1 and 42 at the current moment. The current design of the database is entirely flat with there being 42 columns; some have repeated columns such as address1, address2, address3, etc... This says that I should normalize the data. However, data integrity is not needed at this moment and the way the data is shaped I'm looking at several joins. Not a bad thing but the data is still in a 1 to 1 relationship and I still see a lot of empty fields per row. So my concerns are that this does not allow the database or the application to be very extendable. If they want to add more fields to be parsed (which they do) than I'd need to create another table and add another foreign key to the linking table. The third option is I have a table where the fields are defined and a table for each record. So what I was thinking is to make a table that stores the value and then links to those two tables. The problem is I can picture the size of that table growing large depending on the input size. If someone gives me a file with 300,000 records than 300,000 x 40 = 12 million so I have some reservations. However I think if I get to that point than I should be happy it is being used. This option also allows for more custom displaying of information albeit a bit more work but little rework even if you add more fields. So the problem boils down to: 1. Current design is a flat file which makes extending it hard and it is not normalized. 2. Normalize the tables although no real benefits for the moment but requirements change. 3. Normalize it down into the name value pair and hope size doesn't hurt. There are a large number of inserts, updates, and selects against that table. So performance is a worry but I believe the saying is design now, performance testing later? I'm probably just missing something practical so any comments would be appreciated even if it’s a quick sanity check. Thank you for your time.

  Read the article

• C# 'could not found' existing method

  - by shybovycha

  Greetings! I've been fooling around (a bit) with C# and its assemblies. And so i've found such an interesting feature as dynamic loading assemblies and invoking its class members. A bit of google and here i am, writing some kind of 'assembly explorer'. (i've used some portions of code from here, here and here and none of 'em gave any of expected results). But i've found a small bug: when i tried to invoke class method from assembly i've loaded, application raised MissingMethod exception. I'm sure DLL i'm loading contains class and method i'm tryin' to invoke (my app ensures me as well as RedGate's .NET Reflector): The main application code seems to be okay and i start thinking if i was wrong with my DLL... Ah, and i've put both of projects into one solution, but i don't think it may cause any troubles. And yes, DLL project has 'class library' target while the main application one has 'console applcation' target. So, the question is: what's wrong with 'em? Here are some source code: DLL source: using System; using System.Collections.Generic; using System.Linq; using System.Text; namespace ClassLibrary1 { public class Class1 { public void Main() { System.Console.WriteLine("Hello, World!"); } } } Main application source: using System; using System.Collections.Generic; using System.Linq; using System.Text; using System.Reflection; namespace ConsoleApplication1 { class Program { static void Main(string[] args) { Assembly asm = Assembly.LoadFrom(@"a\long\long\path\ClassLibrary1.dll"); try { foreach (Type t in asm.GetTypes()) { if (t.IsClass == true && t.FullName.EndsWith(".Class1")) { object obj = Activator.CreateInstance(t); object res = t.InvokeMember("Main", BindingFlags.Default | BindingFlags.InvokeMethod, null, obj, null); // Exception is risen from here } } } catch (Exception e) { System.Console.WriteLine("Error: {0}", e.Message); } System.Console.ReadKey(); } } } UPD: worked for one case - when DLL method takes no arguments: DLL class (also works if method is not static): public class Class1 { public static void Main() { System.Console.WriteLine("Hello, World!"); } } Method invoke code: object res = t.InvokeMember("Main", BindingFlags.Default | BindingFlags.InvokeMethod, null, null, null);

  Read the article

• HTML Language question

  - by Mike

  Note my code below. I am trying to figure out why my data is not changing to Spanish. I understand it to be one line of code and that is all within the HTML attribute lang=”es”. Any help would be greatly appreciated. <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xlmns="http://www.w3.org/1999/xhtml" lang=”es” xml:lang="en"> <head> <title>JavaJam Coffee House</title> <link href="javajam.css" rel="stylesheet" type="text/css" /> </head> <body bgcolor="brown"> <h1>JavaJam Coffee House</h1> <ul> <li>Specialty Coffee and Tea</li> <li>Bagels, Muffins, and Organic Snacks</li> <li>Music and Poetry Readings</li> <li>Usability Studies</li> <li>Open Mic Night</li> </ul> <br></br> <p>12312 Main Street<br> Mountain Home, CA 93923<br> 1-888-555-5555</br> </p> <p> <em> <small>Copyright &copy; 2008 JavaJam Coffee House</em></p> E-Mail <a href="mailto;[email protected]"> Michael J. Crawley</a> </body> </html>

  Read the article

• Request URL in Javascript, Fetch URL Content using Java Applet, return to Javascript?

  - by Sam G

  I'm in the process of making a little experiment, it grabs a YouTube page, and returns the highest quality MP4 link, then plays this in a HTML 5 Video element. Now I was using PHP with cURL to get the URL content (YouTube), but that only works on my local server (MP4 link is locked to IP address). I can't think of any other way to get the page content due to cross domain rules except a Java applet. So I've built a Java applet that should return the content of a URL. Java import java.applet.Applet; import java.awt.*; import java.io.ByteArrayOutputStream; import java.io.InputStream; import java.net.HttpURLConnection; import java.net.URL; public class URLFetcherabc extends Applet { public void init() { } public void paint(Graphics g) { g.drawString("Java loaded. Waiting for URL", 0, 10); } public String getURL(String url, String httpMethod) { try { URL u = new URL(url); HttpURLConnection conn = (HttpURLConnection)u.openConnection(); conn.setRequestMethod(httpMethod); InputStream is = conn.getInputStream(); ByteArrayOutputStream output = new ByteArrayOutputStream(); byte[] buffer = new byte[1024]; for (int bytesRead = 0; (bytesRead = is.read(buffer)) != -1; ) { output.write(buffer, 0, bytesRead); } return output.toString(); } catch (Exception e) { }return null; } } Now I've got the applet on the page, but every-time I call the function it returns nothing. Heres my HTML for including the applet. HTML <applet id="URLFetcher" name="URLFetcher" code="URLFetcherabc.class" archive="URLFetcher.jar" height="200" width="200" mayscript=""></applet> Java-Script function fetchurl(urltofetch) { var URLFetcher = document.getElementById("URLFetcher"); var result = URLFetcher.getURL(urltofetch); //Result = URL Content return result; } The function always returns null, in Java the function does work when passed a variable via other means (parameter etc). I've tried running other functions through Javascript and the Java applet does respond. I'm new to Java applets and communicating with them via Javascript, so I'm probably making either a small mistake somewhere or its completely wrong. Any ideas? Thanks

  Read the article

• How to control the text inside DIV tag by not allowing the text to be increased?

  - by SzamDev

  Hi I have this CSS code : #d_image { float: left; width: 320px; margin-top: 20px; margin-left: 25px; } #d_coll { width: 320px; float: left; } #n_div { width: 240px; text-align: right; padding-top: 10px; float: left; padding-right: 10px; padding-left: 0px; } #n_text { text-align: right; float: left; clear: both; } #im { height: 50px; width: 50px; float: right; padding-right: 15px; } #n_col { clear: both; width: 310px; float: right; border-bottom-width: 2px; border-bottom-style: solid; border-bottom-color: #CCC; padding-bottom: 10px; } #n_tittle { text-decoration: none; text-align: right; padding-bottom: 10px; padding-right: 15px; } #n_tittle a { text-decoration: none; text-align: right; color: #1C60B3; } #n_tittle a:hover { text-decoration: underline; text-align: right; color: #FF0000; } I have this HTML code : <div id="d_coll"> <div id="d_image">sample text</div> <div id="n_text">Here will be photo</div> </div> <div id="n_col"> <div id="n_tittle">sample text</div> <div id="im">small photo will be here</div> <div id="n_div">long text</div> </div> I have proplem in n_div, if I put in it a very long text it will be under im div and I want the text inside it to go to new line when it reach the end because the image should be to the right of the text in im div . How I can do that? Thanks in Advance.

  Read the article

• SwingWorker exceptions lost even when using wrapper classes

  - by Ti Strga

  I've been struggling with the usability problem of SwingWorker eating any exceptions thrown in the background task, for example, described on this SO thread. That thread gives a nice description of the problem, but doesn't discuss recovering the original exception. The applet I've been handed needs to propagate the exception upwards. But I haven't been able to even catch it. I'm using the SimpleSwingWorker wrapper class from this blog entry specifically to try and address this issue. It's a fairly small class but I'll repost it at the end here just for reference. The calling code looks broadly like try { // lots of code here to prepare data, finishing with SpecialDataHelper helper = new SpecialDataHelper(...stuff...); helper.execute(); } catch (Throwable e) { // used "Throwable" here in desperation to try and get // anything at all to match, including unchecked exceptions // // no luck, this code is never ever used :-( } The wrappers: class SpecialDataHelper extends SimpleSwingWorker { public SpecialDataHelper (SpecialData sd) { this.stuff = etc etc etc; } public Void doInBackground() throws Exception { OurCodeThatThrowsACheckedException(this.stuff); return null; } protected void done() { // called only when successful // never reached if there's an error } } The feature of SimpleSwingWorker is that the actual SwingWorker's done()/get() methods are automatically called. This, in theory, rethrows any exceptions that happened in the background. In practice, nothing is ever caught, and I don't even know why. The SimpleSwingWorker class, for reference, and with nothing elided for brevity: import java.util.concurrent.ExecutionException; import javax.swing.SwingWorker; /** * A drop-in replacement for SwingWorker<Void,Void> but will not silently * swallow exceptions during background execution. * * Taken from http://jonathangiles.net/blog/?p=341 with thanks. */ public abstract class SimpleSwingWorker { private final SwingWorker<Void,Void> worker = new SwingWorker<Void,Void>() { @Override protected Void doInBackground() throws Exception { SimpleSwingWorker.this.doInBackground(); return null; } @Override protected void done() { // Exceptions are lost unless get() is called on the // originating thread. We do so here. try { get(); } catch (final InterruptedException ex) { throw new RuntimeException(ex); } catch (final ExecutionException ex) { throw new RuntimeException(ex.getCause()); } SimpleSwingWorker.this.done(); } }; public SimpleSwingWorker() {} protected abstract Void doInBackground() throws Exception; protected abstract void done(); public void execute() { worker.execute(); } }

  Read the article

• Creating a multiplatform webapp with HTML5 and Google maps

  - by Bart L.

  I'm struggling how to develop a webapp for Android and iOS. My first app was a simple todo app which was easy to test in my browser and it only used html, javascript and css. However, I have to create an app which uses Google Maps Api to get the location. I created a simple html5 page to test which places a marker on a map. It works fine when testing it on my local server. But when I create an .apk file for Android, the app doesn't work. So I'm wondering, isn't it possible to use it like this? Do I have the use the phonegap libraries to use their geolocation library? And if so, how do you handle the development of a webapp in phonegap for multiple OS? Do you have to install an Android environment and an iOS environment to each include the right phonegap library and to test them properly? Update: I use the following code on my webserver and it works perfectly. When I upload it in a zip-folder to the photogap cloud and install the APK file on my phone, it doesn't work. <!DOCTYPE html> <html> <head> <meta charset="utf-8"> <title>Simple Geo test</title> <script src="http://ajax.googleapis.com/ajax/libs/jquery/1.8/jquery.min.js"></script> </head> <body> <script type="text/javascript" src="http://maps.google.com/maps/api/js?sensor=true"></script> <script> function success(position) { var mapcanvas = document.createElement('div'); mapcanvas.id = 'mapcontainer'; mapcanvas.style.height = '200px'; mapcanvas.style.width = '200px'; document.querySelector('article').appendChild(mapcanvas); var coords = new google.maps.LatLng(position.coords.latitude, position.coords.longitude); var options = { zoom: 15, center: coords, mapTypeControl: false, navigationControlOptions: { style: google.maps.NavigationControlStyle.SMALL }, mapTypeId: google.maps.MapTypeId.ROADMAP }; var map = new google.maps.Map(document.getElementById("mapcontainer"), options); var marker = new google.maps.Marker({ position: coords, map: map, title:"You are here!" }); } if (navigator.geolocation) { navigator.geolocation.getCurrentPosition(success); } else { error('Geo Location is not supported'); } </script> <article></article> </body> </html>

  Read the article

• Javascript auto calculating with (+) and (-)

  - by Josh

  I need some help finding the error in my javascript calculation. I need to calculate the sum of my input boxes automatically and have my user be able to edit the calculation using + or - buttons. The code I have already does the calculation automatically if you manually enter the numbers, but pressing the + or - does not change the calculation. Here is the code: <html> <head> <script language="javascript"> function Calc(className){ var elements = document.getElementsByClassName(className); var total = 0; for(var i = 0; i < elements.length; ++i){ total += parseInt(elements[i].value); } document.form0.total.value = total; } function addone(field) { field.value = Number(field.value) + 1; } function subtractone(field) { field.value = Number(field.value) - 1; } </script> </head> <body> <form name="form0" id="form0"> 1: <input type="text" name="box1" id="box1" class="add" value="0" onKeyUp="Calc('add')" onChange="updatesum()" onClick="this.focus();this.select();" /> <input type="button" value=" + " onclick="addone(box1);"> <input type="button" value=" - " onclick="subtractone(box1);"> <br /> 2: <input type="text" name="box2" id="box2" class="add" value="0" onKeyUp="Calc('add')" onClick="this.focus();this.select();" /> <input type="button" value=" + " onclick="addone(box2);"> <input type="button" value=" - " onclick="subtractone(box2);"> <br /> 3: <input type="text" name="box3" id="box3" class="add" value="0" onKeyUp="Calc('add')" onClick="this.focus();this.select();" /> <input type="button" value=" + " onclick="addone(box3);"> <input type="button" value=" - " onclick="subtractone(box3);"> <br /> <br /> Total: <input readonly style="border:0px; font-size:14; color:red;" id="total" name="total"> </form> </body></html> Im sure the issue must be small, I just cant put my finger on it.

  Read the article

< Previous Page | 465 466 467 468 469 470 471 472 473 474 475 476  | Next Page >