Search Results

Search found 60691 results on 2428 pages for 'super button'.

Page 469/2428 | < Previous Page | 465 466 467 468 469 470 471 472 473 474 475 476  | Next Page >

• Windows 7 gadgets changing place when I move from dual monitor to a single one

  - by tsahilevi

  Hi, I am using Windows 7 on my laptop. At the office, I have a dual monitor setup through my docking station while at home or during meetings I use my laptop with its single monitor. Whenever I move between these two setups, Windows 7 plays with the location of the gadgets I have and I need to rearrange them each time. Is there a way to tell it to store these settings and locations (both gadgets and icons) so that it will remember their placement on the dual monitor setup and it will remember a different placement for the single monitor setup?

  Read the article

• Apple MagicMouse randomly loses connection

  - by Yuval

  My Magic Mouse periodically randomly loses connection to my macbook, sitting approximately a foot and a half away from it. There are no software updates available for Snow Leopard (10.6.3). I have a bluetooth keyboard (that sits a little closer to the macbook, though I'm not sure this is the issue) that rarely suffers from this problem. Google results mostly suggest to update the software but I have the most updated version of it already. Does anybody have any idea what could be causing the issue? Is this simply a defective mouse? Additional info: I tried replacing the batteries with new ones, making sure they are sitting tightly in their position with no change in behavior (still disconnects periodically). Also, this doesn't seem to be a problem that the mouse is turning itself off to save battery - it does not reconnect when I move or click it. If I wait long enough (a couple of minutes) it reconnects on its own. Otherwise I have to go to the bluetooth menu with my macbook touchpad and choose "yuval's mouse - Connect"

  Read the article

• Error message: do not have authority to access this function

  - by Ross

  Hi. I just reinstalled Windows on my computer after getting a virus. I worked with it for a while and everything worked as it should. I then used a backup of the computer that I had made a week or so earlier and copied the backup over my user folder. (That is, I took the folder named "Joe" from the backup drive and copied-replaced the whole thing over the folder named "Joe" on the new Windows install.) To do this I had to work from an Ubuntu live CD because some of the files were in use. Now the problem: After I did this copying my computer says that I have no authority. Anytime I try to access anything that is part of the operating system (Explorer, Personalize, Control Panel, etc) I get an error message that says I don't have the authority to do this. I am able to access things that aren't part of the OS: Chrome, Firefox, my accounting software, Rockbox, but nothing that is part of the OS. I only copied over the User file, so I didn't mess with the registry or anything, so I have no idea why this should be. Does anyone out in cyberspace have any idea? Thank you.

  Read the article

• Install Ubuntu to partition with Windows 7 Loader - erase partition with Win loader

  - by user31906

  Can I install Ubuntu 9.10 to partition with Windows 7 Loader? I.e. I want to completely erase this partition and have Ubuntu on it. Will GRUB boot Windows 7 without its loader?

  Read the article

• How to read unix usage

  - by sixtyfootersdude

  I did some searching but I cannot find documentation on how unix usage works. I know somethings (mostly through trial and error) but for example how do I know that: /usr/bin/ls [-aAbcCdeEfFghHilLmnopqrRstuvVx1@] [file]... Means that you can include more than one option. Ie: ls -la Can someone point me to some documentation on what the usage syntax is.

  Read the article

• How to temporarily stop web pages intercepting a right-click?

  - by callum

  Some websites like Google Drive intercept right-clicks and provide their own context menu. This is usually what I want, but sometimes I still want to do a normal, native browser right-click. Is there any modifier key or something like that to make it so a right-click doesn't trigger a click event on the web page, so it can't show it's context menu? I want to do this per-click, not by changing a setting somewhere. If there are different techniques depending on browser/OS, please list them.

  Read the article

• Python version priority in OSX/UNIX PATH environment variable

  - by mindthief

  Hi all, I want my system to use /usr/bin/python, but it's currently using /opt/local/bin/python, which points to /usr/bin/python2.6. I tried modifying the PATH variable in my .bashrc as PATH=~/bin:$PATH ...and then set a symbolic link in ~/bin to point to /usr/bin/python. i.e. ~/bin/python --> /usr/bin/python I figured this might prioritize this symlink over the /opt/local version if it came before the other one in the PATH variable, but when I opened a new shell I still found python pointing to /opt/local/bin. Any advice on a good way to get the system to use /usr/bin/python? Also, I usually use ipython as opposed to python directly. I'm assuming that if the system starts to use the correct version of python then ipython would also use that version? If not, how could I also get ipython to use the correct version? Thanks!

  Read the article

• Windows update stuck. Fixt it stuck. So is KB947821. What should I do?

  - by Jim Thio

  I installed a new computer. After I installed I update everything and let the computer runs for days. Then I don't know what my daughter do. The computer stop responding. Windows update no longer work. People said to run fix it. Fix it run and after that the problem still persist and it still doesn't work. The problem changes though. Before there is some error code. Now windows update simply "updating" never end. So I downloaded KB947821. It's been 3 hour and it's still installing. Looks like it hit firewall or something. i don't see windows update on firewall exception list. However, I've never heard that this is an issue. Firewall only protect against incoming transaction, not outgoing right? Or what am I missing. What should I do?

  Read the article

• Debugging Samba/CUPS printer sharing with Windows

  - by mrdrbob

  I've got a HP Deskjet hooked up to a Slackware 12.2 box. I've got CUPS set up and can print a test page from the box just fine. I've also got Samba set up and have a couple file shares that work fine. I'm trying to share that HP Deskjet out via Samba, but I can't get it to show up in any Windows system. I see the server and its file shares in Windows networking, but when I open the Printers, no printer shows up. Running net view \\servername from the command line lists the file shares, but no printers. Here's the pertinent part of my smb.conf, if that helps: [global] workgroup = HOMENET security = share hosts allow = 192.168.1. 192.168.2. 127. load printers = yes printcap name = cups printing = cups log file = /var/log/samba.%m max log size = 50 [printers] comment = All Printers path = /var/spool/samba browseable = no public = yes writable = no printable = yes guest only = yes Can anyone give me some pointers as to where to start looking for potential causes? Update: Running testparm shows no errors. Here's the output (minus the file shares): [global] workgroup = HOMENET security = SHARE log file = /var/log/samba.%m max log size = 50 printcap name = cups hosts allow = 192.168.1., 192.168.2., 127. [printers] comment = All Printers path = /var/spool/samba guest only = Yes guest ok = Yes printable = Yes browseable = No

  Read the article

• insert null character using tamper data

  - by Jeremy Comulu

  Using the firefox extension tamper data (for modifing http requests that firefox makes) how do I insert a null character into a post field? I can enter normal characters, but binary characters in it are not urlencoded and are shown as is, so how do I enter the null character into a field? If you know of a firefox extension like tamper data that I can do this or a way to do this using tamper data please post.

  Read the article

• Disaster After Removing Two HDD From LaCie RAID 0 Case

  - by John

  This is the second time this has happened. I own a LaCie IDE RAID 0 Enclosure and the RAID went bad. The system gave me a warning that the data could be read from the RAID but that nothing could be written, and to remove the data ASAP. I did that and erased and reinitialized the RAID. System reported it was fine, no issues. I wrote to the RAID again and the system reported the same issue. So, I removed the drives and tested them individually thinking one must have gone bad. Sure enough, one HDD reported all bad blocks, every single one after the Master Boot Record. I didn't think much about it because of the age of the drives, 5 years old. So, I bought two new drives plugged them in and started up the RAID again. Exactly the same thing happened. All was fine after initializing the RAID and then the next day after powering on the RAID the exact same issue. The HDD sitting in the same position as the first "bad" HDD reported all bad blocks. Obviously, this is an issue with LaCie's bridge board not with the drives. No utility I have used has been able to bring this HDD back to life. I thought I would just copy the MBR from the good drive to the new one using a sector editor but am hesitant. Is it possible the firmware on the HDD has been corrupted by the LaCie bridge board?? What else could be the cause of such an issue? How can I fix this drive?

  Read the article

• BackTrack5 R2 video driver works, but presents disturbing error message

  - by poz2k4444

  I've installed backtrack 5 R2 on my computer and everything works fine but the video driver. The solution described here does work, but whenever I start the graphics mode, a message saying that the graphics card doesn't support the configuration that is loaded. I don't know why this is happening. It doesn't change the performance of my computer, but I'd like to know why the message is arising, and what I can do to stop it. Alternatively, where can I find the configuration file that would help me understand what's going on?

  Read the article

• Not being able to `make` in terminal on Mac OS X 10.7

  - by AlanTuring

  Hi so i am trying to install the commands wget and with-readline for use with Mac OS X's terminal. The configuration seems to work fine for both even though i am required to specify for the first one, host= i686-apple. When i get to the make part of the installation, the output is as follows. For wget: for with-readline so does anyone have any idea what's going on? Pastie links: wget: http://pastie.org/4925079 with-readline: http://pastie.org/4925083 Thanks in advance.

  Read the article

• Virtual Box state not saving upon restart/reset/shutdown - reverting to an earlier state

  - by user638756

  Every time I restart/shut down my VM in VirtualBox (image is Ubuntu 10.02), whenever I start it back up, it reverts to the state it was in after I installed Guest Additions. This is extremely frustrating as every time I make progress on a project, whenever it restarts (mostly from crashing), I have to redo mostly everything. Is this a known problem with Guest Additions or with Virtual Box in general, and if so is there some solution?

  Read the article

• Virtualbox 4 hangs when trying to install ubuntu guest on ubuntu host system

  - by misterjinx

  I'm trying to install ubuntu server using virtualbox 4.0.4 in a ubuntu 10.10 host OS. I have the iso image on my hard drive which I used to perform the install. I edited the settings and added this image at the storage section, selected it as a primary master, so I could boot from it and start the install process. But now, each time I start the installation, at the very beginning or if I'm lucky, after I click on the install link at the welcome screen, the process hangs and all the computer is blocked. This happened 3 times already. I even tried to perform the installation using an old CD I had with the 9.10 server version, thinking that the iso image might be the issue, but the problem still persists. I dont know what could cause this problem. My computer is a dell laptop with AMD processor (I dont know if this is important). Any help is very appreciated.

  Read the article

• Using QoS to prioritize IP addresses

  - by Tristan

  I have a Western Digital N900 router. I was hoping I'd be able to throttle users based on their MAC address with it, which isn't possible sadly. Seems simple in principle though, duh. The battle against bandwidth hogging roomates rages on. Could I just set the local IP range to their IP, and then set the Local port range to every single port in existence. Then prioritize their IP to lower than mine? Will this work? What are all the ports? And what's the difference between Local and Remote IPs or Ports? Name: Roomate, Priority: Low, Protocol: TCP or UDP ??, Local IP Range: .101 to .101, Local Port Range: 0 to infinity, Remote IP Range: ? to ?, Remote Port Range: ? to ?

  Read the article

• DNA and Quantum computing

  - by Jacques

  I recently(A couple of weeks ago) read an article about the future of processing and how quantum-processors and DNA-processors(DNA-computing) are the future competitors of computing since both will completely outperform the computers of this era. In terms of processing speeds, what do we expect from these two different processing techniques ? Personally I believe that DNA-processing will be a major step towards AI. For labs and office work I think quantum-processing which will be more logical. I'm quite excited that i'm still so young - to see what the future of technology holds! Then again my parents will soon find out what the after-life holds... just as bloody exciting, if not more..

  Read the article

• When and why would Windows Explorer lock an external hard disk?

  - by Ngu Soon Hui

  I am quite surprised to see that Windows Explorer is locking my external hard disk. Is there any reason why explorer.exe is holding on to my external hard disk? Before I was trying to detach the external hard disk, I was opening a csproj file using Visual Studio 2008. I made sure that I closed down Visual Studio before trying to detach the external hard disk. There was no other active program except Google Chrome, from what I could see, that was running.

  Read the article

• SQLyog alternative

  - by JohnM2

  Do you know any app similar to SQLyog (sql gui admin tool)? Especially, I am looking for opinion from users who had used SQLyog and found "something better".

  Read the article

• There's a stray current flowing from my monitor through the VGA cable to the PC. Is this safe?

  - by EApubs

  I have two monitors in my machine. One is an old LCS samsung monitor. Recently, I started to hear a small hum in my speakers (subwoofer) and replaced them. The new one also got the issues then I found our that its a grounding issue. I unplugged the PC's power chord. The monitor is still switched on. When I checked, there's current in the earth pin (ground pin). When I unplug the monitor, there's no current and the speaker is normal. Now, I have moved that monitor to my dad's machine and took his monitor. My question is, is it a big issues? The house's earthing system is working and its grounding the current. I won't feel it if I touch the machine like in many other cases. But still, is it good to keep that monitor attached to my machine? Can it harm the computer? What should I do?

  Read the article

• Linux: multiple network connections - 3G/4G / Wifi / LAN / etc; how can i set a preferred network connection to use?

  - by Alex

  I've been looking at how I can setup a laptop that has multiple network interfaces, but a problem exists if all the connections are active, i.e. 3G, WiFi and LAN are all connected, I would like it to default to LAN. I would like to set "weights" or "priority" to each connection, so that if the LAN is unplugged, it'll default to WiFi - if its in range and working, otherwise, it'll switch and use the 3G dongle; I've been looking around and I can see that the "metric" counter for route isn't being used for recent kernels. I thought that would be able to set the preferred gateway / connections - but according to the man page: man route: OUTPUT Metric The 'distance' to the target (usually counted in hops). It is not used by recent kernels, but may be needed by routing daemons. So I'm confused, are there any scripts / apps / anything that can detect active network connections, and by way of configuration, send my default gateway network traffic through that interface if its active / alive?

  Read the article

• Ubuntu Lucid startup events

  - by Lakshman Prasad

  On starting up Ubuntu, I seem to have to do the following, all the time: Enter the password for the keyring to unlock, so that it connects to wifi Enable the "Extra" Visual effects from the Appearances preferences Start skype. How can I automate all of these. Bonus points, if I can use the existing chat bundled in the system to use my skype account. Also, since I dual boot, I get the grub options initially to select Windows or Ubuntu that waits for 10 seconds for me to choose. How do I make it go to ubuntu, unless I explicitly not press a key to boot to windows. Thanks in advance.

  Read the article

• Errors reported by "powercfg -energy"

  - by Tim

  Running "powercfg -energy" under Windows 7 command line, I received a report with following three errors: System Availability Requests:Away Mode Request The program has made a request to enable Away Mode. Requesting Process \Device\HarddiskVolume2\Program Files\Windows Media Player\wmpnetwk.exe CPU Utilization:Processor utilization is high The average processor utilization during the trace was high. The system will consume less power when the average processor utilization is very low. Review processor utilization for individual processes to determine which applications and services contribute the most to total processor utilization. Average Utilization (%) 49.25 Platform Power Management Capabilities:PCI Express Active-State Power Management (ASPM) Disabled PCI Express Active-State Power Management (ASPM) has been disabled due to a known incompatibility with the hardware in this computer. I was wondering for the first error, what does "enable away mode" mean? for the second, what utilization percentage of CPU is reasonable? for the third, what is "PCI Express Active-State Power Management (ASPM)"? How I can correct the three errors? Thanks and regards!

  Read the article

• Keyboard shortcut to quickly jump to the URL address field in Firefox...

  - by James Burton

  Hi, in Firefox I very often want to quickly enter a new URL in the address field. Therefore it would be very nice to be able to quickly jump to the URL address field with a keyboard shortcut! Today I must move my mouse and place the cursor in that field and also ensure that the current address is selected so I can overwrite it when entering the new URL. Very annoying! I'm sure I'm not the first one to have this need so there is probably a shortcut or an extension that does this already, but I cannot find that information! Thanks in advance, /James

  Read the article

• How to have a consistent mail receiver name displayed in Outlook 2007 in the inbox folder

  - by usr

  Currently the same sender address appears differently in my inbox for different mails. The variations are: [email protected] Doe, John That is because I received some mails before I changed the name to "John Doe" and some after. It is now very annoying to find mails from John because I have to look at two places in my inbox after I sort them by sender. How can I make Outlook always sho "Doe, John"?

  Read the article

< Previous Page | 465 466 467 468 469 470 471 472 473 474 475 476  | Next Page >