Search Results

Search found 18219 results on 729 pages for 'tips box'.

Page 469/729 | < Previous Page | 465 466 467 468 469 470 471 472 473 474 475 476  | Next Page >

• Deny directory browsing in a Proftpd / Ubuntu Installation

  - by skylarking

  I used this guide to set up a Proftpd installation an Ubuntu 8.04 server... Works well, but the generic user ( userftp ) can run ls and is able to change to any Directory and browse freely on the server ..from the root / and upwards.. I added this line to etc/shells /bin/false in hopes that that would prevent this ... I really only want the userftp account to be able to upload to the generic /home/FTP-Shared directory, and be able to do nothing else on the server. How is this accomplished ... This is a headless Ubuntu box..and I am using CLI only .. no GUI admin tools

  Read the article

• Block a machine from accessing the internet

  - by Simon Rigby

  After some confirmation that I have thinking right in this scenario. We have a number of wired and wireless machines which presently have direct internet access. I also have a Linux (Ubuntu) server which is used as a file server for the network. Essentially I would like to be able to turn internet access on and off for machines. My plan is to block these machines by MAC address at the router. I would then set up a proxy server on the Linux box (ie Squid) so that the machines I wish to restrict can access the internet via the proxy. As I can adjust access via ACLs in squid, I would be able to switch on or off a machines access to the internet without having to further adjust the router's MAC rules. And of course I could go further and create a few scripts to assist with this admin task. Does this seem sound and have I over looked anything? Any help greatly appreciated. Simon.

  Read the article

• Cannot connect to FTP server from external host

  - by h3

  I have a FTP server (vsftpd) setuped on a Linux box (Ubuntu server). When I try to connect with a computer on the same network everything works fine as expected. But as soon the IP is external it won't connect.. I first assumed the port was blocked, but then: localserver:$ sudo tail -f /var/log/vsftpd.log Wed Jan 13 14:21:17 2010 [pid 2407] CONNECT: Client "xxx.xxx.107.4" remotemachine:$ netcat svn-motion.no-ip.biz 21 220 FTP Server And it hangs there .. Is there any other ports other than 21 that are required to be open ?

  Read the article

• OpenVPN - client-to-client traffic working in one direction but not the other

  - by Pawz

  I have the following VPN configuration: +------------+ +------------+ +------------+ | outpost |----------------| kino |----------------| guchuko | +------------+ +------------+ +------------+ OS: FreeBSD 6.2 OS: Gentoo 2.6.32 OS: Gentoo 2.6.33.3 Keyname: client3 Keyname: server Keyname: client1 eth0: 10.0.1.254 eth0: 203.x.x.x eth0: 192.168.0.6 tun0: 192.168.150.18 tun0: 192.168.150.1 tun0: 192.168.150.10 P-t-P: 192.166.150.17 P-t-P: 192.168.150.2 P-t-P: 192.168.150.9 Kino is the server and has client-to-client enabled. I am using "fragment 1400" and "mssfix" on all three machines. An mtu-test on both connections is successful. All three machines have ip forwarding enabled, by this on the gentoo boxes: net.ipv4.conf.all.forwarding = 1 And this on the FreeBSD box: net.inet.ip.forwarding: 1 In the server's "ccd" directory is the following files: client1: iroute 192.168.0.0 255.255.255.0 client3: iroute 10.0.1.0 255.255.255.0 The server config has these routes configured: push "route 192.168.0.0 255.255.255.0" push "route 10.0.1.0 255.255.255.0" route 192.168.0.0 255.255.255.0 route 10.0.1.0 255.255.255.0 Kino's routing table looks like this: 192.168.150.0 192.168.150.2 255.255.255.0 UG 0 0 0 tun0 10.0.1.0 192.168.150.2 255.255.255.0 UG 0 0 0 tun0 192.168.0.0 192.168.150.2 255.255.255.0 UG 0 0 0 tun0 192.168.150.2 0.0.0.0 255.255.255.255 UH 0 0 0 tun0 Outpost's like this: 192.168.150 192.168.150.17 UGS 0 17 tun0 192.168.0 192.168.150.17 UGS 0 2 tun0 192.168.150.17 192.168.150.18 UH 3 0 tun0 And Guchuko's like this: 192.168.150.0 192.168.150.9 255.255.255.0 UG 0 0 0 tun0 10.0.1.0 192.168.150.9 255.255.255.0 UG 0 0 0 tun0 192.168.150.9 0.0.0.0 255.255.255.255 UH 0 0 0 tun0 Now, the tests. Pings from Guchuko to Outpost's LAN IP work OK, as does the reverse - pings from Outpost to Guchuko's LAN IP. However... Pings from Outpost, to a machine on Guchuko's LAN work fine: .(( root@outpost )). (( 06:39 PM )) :: ~ :: # ping 192.168.0.3 PING 192.168.0.3 (192.168.0.3): 56 data bytes 64 bytes from 192.168.0.3: icmp_seq=0 ttl=63 time=462.641 ms 64 bytes from 192.168.0.3: icmp_seq=1 ttl=63 time=557.909 ms But a ping from Guchuko, to a machine on Outpost's LAN does not: .(( root@guchuko )). (( 06:43 PM )) :: ~ :: # ping 10.0.1.253 PING 10.0.1.253 (10.0.1.253) 56(84) bytes of data. --- 10.0.1.253 ping statistics --- 3 packets transmitted, 0 received, 100% packet loss, time 2000ms Guchuko's tcpdump of tun0 shows: 18:46:27.716931 IP 192.168.150.10 > 10.0.1.253: ICMP echo request, id 63009, seq 1, length 64 18:46:28.716715 IP 192.168.150.10 > 10.0.1.253: ICMP echo request, id 63009, seq 2, length 64 18:46:29.716714 IP 192.168.150.10 > 10.0.1.253: ICMP echo request, id 63009, seq 3, length 64 Outpost's tcpdump on tun0 shows: 18:44:00.333341 IP 192.168.150.10 > 10.0.1.253: ICMP echo request, id 63009, seq 3, length 64 18:44:01.334073 IP 192.168.150.10 > 10.0.1.253: ICMP echo request, id 63009, seq 4, length 64 18:44:02.331849 IP 192.168.150.10 > 10.0.1.253: ICMP echo request, id 63009, seq 5, length 64 So Outpost is receiving the ICMP request destined for the machine on it's subnet, but appears not be forwarding it. Outpost has gateway_enable="YES" in its rc.conf which correctly sets net.inet.ip.forwarding to 1 as mentioned earlier. As far as I know, that's all that's required to make a FreeBSD box forward packets between interfaces. Is there something else I could be forgetting ? FWIW, pinging 10.0.1.253 from Kino has the same result - the traffic does not get forwarded. UPDATE: I've found that I can only ping certain IP's on Guchuko's LAN from Outpost. From Outpost I can ping 192.168.0.3 and 192.168.0.2, but 192.168.99 and 192.168.0.4 are unreachable. The same tcpdump behavior can be seen. I think this means the problem can't be due to ipforwarding or routing, because Outpost can reach SOME hosts on Guchuko's LAN but not others and likewise, Guchuko can reach two hosts on Outpost's LAN, but not others. This baffles me.

  Read the article

• Apache - access two or more virtual hosts from outside

  - by André Alçada Padez

  I have an apache2 server running on my ubuntu system. I have two sites enabled: default (ServerName localhost) site2 (ServerName jslib) I run a windows Virtual Box Machine, to be able to test my stuff in IE. If i type the ubuntu's IP in the addressbar i get the localhost. I was wondering how can i access both (or more as i need it) from other machines. Thanks update I have configured the windows' hosts file like so: 10.0.2.2 localhost 10.0.2.2 jslib It works, but i am really looking for something that i can configure on the server side, and then just change the value of the URL, am i crazy?

  Read the article

• Migrate TFS 2010 Application Tier to another server on the same domain

  - by Liam

  I'm in the process of looking into the possibility of moving our TFS 2010 Application Tier to another server from the one it is on at the moment so that we can repurpose the hardware. I've been looking through the Microsoft Documentation over at http://msdn.microsoft.com/en-us/library/ms404869.aspx, but this assumes that everything is stored on one box (Application and Data tiers). In my setup however, our Data tier is separate to the Application tier and will be staying where it is. I think I should be able to do this but for my own peace of mind, would there be any issues or implications if I merely installed the Application Tier on the new hardware and then connected it to the existing data tier?

  Read the article

• Chromium OS Lime installation confusion

  - by Abhinav Kulshreshtha

  I Used to download Chromium Vanilla build Virtual-box image from hexxeh. recently i wanted to try Lime build which only gives a .img file. I used the mentioned Windows Image Writer (link given on the lime website.) and a 8GB Transcend Website. When i tried to boot from pen-drive, the screen only flashed and nothing happened. Now when i tried to access my pendrive, it shows only 0.99 gb capacity. What happened wrong. How can i recover my pendrive. I tried to create vdi using VBoxManage.exe convertdd chromiumos.img chromiumos.vdi command given in This link. But it is not running on VBox either.

  Read the article

• vi visual mode doesn't work

  - by BobMarley

  I'm running vim (7.0.237) after sshing to a remote CentOS box, and it just won't enter visual mode. When I press 'v', it just beeps and does nothing. I'm running Ubuntu with GNOME Terminal, and the local copy of vi works fine, so I don't see how this could be a problem with the terminal. I have the same .vimrc file on the local and remote machines, and the only settings are: set nocompatible; set tabstop=4. I'm at a total loss here, any ideas?

  Read the article

• Postfix sending mail back to itself? (Ubuntu 9.10)

  - by webo

  I setup Dovecot and Postfix using the "Dovecot-Postfix" package with SASL and all that. The Dovecot part seems to be working fine but I'm having issues with Postfix. Whenever I send a message to another address through the postfix server, two things happen. the message never gets to the other address (even when I request a delivery notification, it says that it's been delivered but it's not in the spam box in the other inbox or anything) The message comes back to my inbox through Dovecot as though I sent it to myself internally. e.g. I send an email through my postfix server to my gmail account, 10 minutes later nothing shows up in my gmail account but the message comes back to me as though I was sending it to my internal address (with no errors) Any ideas?

  Read the article

• 'Slow down' A DHCP server on purpose.

  - by Ced

  As the title implies, May look like a silly question, But what i'm trying to do, Is to have 2 DHCP servers in one network. One only leases IPs to Bootp clients (And if the client re-requests immediately after leases again) And one DHCP server, which is builtin with my PFsense router, that leases the non-bootp clients so they can access the internet and other network resources. I know by chance that PFsense uses ISC-DHCPd. Maybe they have a delay option? All i need to do to make sure the bootp/PXE boot clients get the proper address, is slow down the DHCP server in the PFsense box. Question is how. Anyone ideas? Thanks in advance

  Read the article

• How much power supply do I need for my server, and could a shortage be causing my odd crashing?

  - by dolan

  I have 5 servers, all with similar hardware (i7, four 2tb 7200rpm drives, two 4tb 5400rpm drives, 430 watt power supply), and lately the machines have been freezing up. This has gotten worse in the last day or so, and I can't pinpoint any explanation. One recent change was adding the two 4tb hard drives. The crashes happen most often while running a large Hadoop job, so I was originally thinking the load was causing some issues, but last night one server just froze without any heavy load on the box (or so I think), other than HDFS (Hadoop's distributed file system) was probably rebalancing itself since two of the five nodes were offline. If I plugin a monitor and keyboard to one of these frozen machines, I can't get any response or feedback on the screen. Any ideas on possible points of failure and/or different logs I can look at to investigate? Thanks Edit: The systems are running Ubuntu 10.04 Edit 2: More on hardware: intel core i7-930 bloomfield 2.8ghz processor (quad core) 12gb (6 x 2gb) kingston ddr3 1333 ram antec earthwatts green 430 power supply msi x58m lga 1366 motherboard

  Read the article

• Best practice for ONLY allowing MySQL access to a server?

  - by Calvin Froedge

  Here's the use case: I have a SaaS system that was built (dev environment) on a single box. I've moved everything to a cloud environment running Ubuntu 10.10. One server runs the application, the other runs the database. The basic idea is that the server that runs the database should only be accessible by the application and the administrator's machine, who both have correct RSA keys. My question: Would it be better practice to use a firewall to block access to ALL ports except MySQL, or skip firewall / iptables and just disable all other services / ports completely? Furthermore, should I run MySQL on a non-standard port? This database will hold quite sensitive information and I want to make sure I'm doing everything possible to properly safeguard it. Thanks in advance. I've been reading here for a while but this is the first question that I've asked. I'll try to answer some as well = )

  Read the article

• Need advice on how to set up live video streaming to web/mobile devices

  - by jasondewitt

  I have a bunch of live udp video streams that currently are viewed by set top boxes in my network. I would like to pick this video up (I can do this with vlc now) and stream it out to other non-STB endpoints (webpage or a phone/tablet of some sort). Right now I am able to pick up the udp stream with vlc and convert it to an http stream on port 8080 of my vlc box. Then I can use the vlc client to pick up and watch that video stream. This is where I'm not sure where to go with it. I really doubt I would want everyone who is watching the video to make a connection back to my vlc server that is doing the encoding, so how do I distribute this live video to the people who want to see it?

  Read the article

• user profile cannot be loaded in Windows 7

  - by alex

  so I wake up this morning and my mother drops the Dell laptop. She starts it up and no desktop icons appear. I take a look (mind you I'm not totally awake yet), go to start menu, click a button (I forgot which one) and a window box pops up saying something a bout the hardrive (I think it might have said cannot be located) she's crying right now and waiting until 10 to take it to bestbuy. she wont let me touch the dell either. could this be because of the drop or from torrents (which never was a problem)? please help.

  Read the article

• Determine process using a port, without sudo

  - by pat

  I'd like to find out which process (in particular, the process id) is using a given port. The one catch is, I don't want to use sudo, nor am I logged in as root. The processes I want this to work for are run by the same user that I want to find the process id - so I would have thought this was simple. Both lsof and netstat won't tell me the process id unless I run them using sudo - they will tell me that the port is being used though. As some extra context - I have various apps all connecting via SSH to a server I manage, and creating reverse port forwards. Once those are set up, my server does some processing using the forwarded port, and then the connection can be killed. If I can map specific ports (each app has their own) to processes, this is a simple script. Any suggestions? This is on an Ubuntu box, by the way - but I'm guessing any solution will be standard across most Linux distros.

  Read the article

• Rolling desktop recorder?

  - by lance

  I want a piece of software that will constantly record what I'm doing on my desktop, discarding footage that's over [30] seconds old. Its recording would be a rolling one. The idea is that I can somehow hit a button and see "what just happened". I don't want to have to babysit it. That is, I don't want a piece of software designed for screencasting (which I'm not trying to do). My bias against that is based on my (maybe incorrect?) assumption that I'd regularly have to start/stop the recording throughout the day. The idea is that this piece of software would consume fewer resources (than a screencast recorder) on my box, as it's only keeping a very limited amount of footage in memory (and low quality would even be acceptable), because it's discarding frames fairly quickly after they're captured. Where can I find a piece of software with features like this?

  Read the article

• What type of security problems are mitigated by this .NET architecture?

  - by Jonno

  Given the following physical layout for a .NET web application: DB (sql server, windows) - No public route (no table access, only stored procs) Web Service DAL (iis, windows) - No public route (can be accessed by web server via port 80 and 443) Web Server (iis, windows) - Public route (only via port 80 and 443) What type(s) / examples of attack could be used to compromise the public web server but would be blocked by the Web Service DAL? i.e. can you think of concrete attack types that the DAL stops? Please note, I am interested only in the security aspect, not scaling / fault tolerance / performance / etc. In my mind if the web server has been compromised using an attack over port 80/443, then the same attack would work over port 80/443 to the Web Service DAL box.

  Read the article

• Looking for a router with multiple WAN ports and load balancing

  - by Cyrcle

  I'm going to be moving in a few months. The location I'm moving to is great except it's on a road with very few people, so the internet access option is limited to DSL at 1.6Mbps down, 384kbps up. This is much slower than I'm used to. One option is to get at least two of the DSL lines. There's also good possibility that I'll be able to get WiMax or similar. I've been looking around a bit and it seems like what I need is a load balancing router with multiple WAN ports. Can anyone recommend some good ones? I could also go with a small power efficient Linux box with multiple NICs. What would be good software for that? It'd need to be able to handle around 10Mbps. Thanks for any help

  Read the article

• Will my RAID0 stay intact when I move it to a new computer?

  - by Jeremy H

  My primary drive is a 250GB WD SATA drive. So, I added 2x 500GB 7,200 RPM WD SATA drives into my Windows Vista box and created a 1TB RAID0. I then formatted the the primary drive and installed Windows 7. To my pleasant surprise when I booted into Windows 7 my RAID0 was still intact and I kept trotting along the same as I did before. Now I am replacing my motherboard, processor, and RAM and plan on formatting the primary 250GB drive again and using it to boot for a new clean install of Windows 7. My question is: if I move these two SATA drives which are setup for RAID0 into the new system, install Windows 7 again, will the RAID0 remain? Edit: Software RAID. I created it within Windows. The RAID0 does NOT contain the system boot partition.

  Read the article

• Multiple users writing to one Samba mount point in OSX

  - by Sam

  I have an OSX box containing a script which writes a unique file to a Samba share. The first part of the script mounts the share. On the machine are 2 users- UserA and UserB. Each requires to run this script at any given time however only the user who mounted the share is able to write to it. I really need both users to have rwx access. Here is what I have tried: Mounting then chmod'ing the mountpoint (no effect- overruled by Samba server?) chmod'ing the mountpoint then mounting (same as above) sudo mount_smbfs Both users have admin privileges. Ideally a solution would be executable by one of the users (contained in the script) and not rely on mounting at machine boot time. Any ideas appreciated, thanks!

  Read the article

• Best way to deploy my node.js app on a Varnish/Nginx server

  - by Saif Bechan

  I am about to deploy a brand new node.js application, and I need some help setting this up. The way my setup is right now is as follows. I have Varnish running on external_ip:80 I have Nginx behind running on internal_ip:80 Both are listening on port 80, one internal port, one external. NOTE: the node.js app runs on WebSockets Now I have the my new node.js application that will listen on port 8080. Can I have varnish set up that it is in front of both nginx and node.js. Varnish has to proxy the websocket to port 8080, but then the static files such as css, js, etc has to go trough port 80 to nignx. Nginx does not support websockets out of the box, else I would so a setup like: varnish - nignx - node.js

  Read the article

• Samba + Centos (Share not working)

  - by mplacona

  I've done this a few times already, but for some reason this time it's not working. I have a folder called ruby (root:root - 0777) on /home/placona I'm trying to see this folder from my WindowsXP box, but keep getting permission denied. I can see the global share though, but whenever I try clicking on the ruby share, it won't let me in. Here's my smb.conf settings: [global] log file = /var/log/samba/samba.%m guest account = nobody netbios name = DEVBOX server string = DEVBOX CENTOS workgroup = WORKGROUP encrypt passwords = yes security = share max log size = 50 [ruby] path = /home/placona/ruby I want to be able to open this folder without using password (hence the guest account = nobody). I tried even with password, but never seems to work. Can anyone spot anything wrong with my settings?

  Read the article

• How to version large binary files?

  - by Walter White

  I run Windows XP inside a virtual machine for some tasks. I attempted to use git to version the image for virtual box; however, it is about 6GB after all the service packs. I only have 6GB of ram and git bombs out saying it is out of memory. I would basically like to have snapshots of Windows so that I can simply blow away an image and start anew when I want to. I like to have something I can rollback to in the event that an upgrade doesn't work so I would prefer to use version control or snapshots if the filesystem supports it. Any ideas on what tools I can use to do that?

  Read the article

• IIS not using available memory?

  - by Herb Caudill

  Recently launched an ASP.NET site running on a single 32-bit WS2003 box (SQL on a separate server). The server has 4GB intalled, 3GB available. According to task manager, the w3wp.exe process is only using between 200-600MB. The site has tens of thousands of pages and makes heavy use of page output caching, so I would expect it to use a lot more of the available memory. The app pool isn't set to throttle memory usage. Is there anything else that might be limiting the amount of memory that IIS takes?

  Read the article

• Is there a way to control two instantiated systemd services as a single unit?

  - by rascalking

  I've got a couple python web services I'm trying to run on a Fedora 15 box. They're being run by paster, and the only difference in starting them is the config file they read. This seems like a good fit for systemd's instantiated services, but I'd like to be able to control them as a single unit. A systemd target that requires both services seems like the way to approach that. Starting the target does start both services, but stopping the target leaves them running. Here's the service file: [Unit] Description=AUI Instance on Port %i After=syslog.target [Service] WorkingDirectory=/usr/local/share/aui ExecStart=/opt/cogo/bin/paster serve --log-file=/var/log/aui/%i deploy-%i.ini Restart=always RestartSec=2 User=aui Group=aui [Install] WantedBy=multi-user.target And here's the target file: [Unit] Description=AUI [email protected] [email protected] After=syslog.target [Install] WantedBy=multi-user.target Is this kind of grouping even possible with systemd?

  Read the article

< Previous Page | 465 466 467 468 469 470 471 472 473 474 475 476  | Next Page >