Search Results

Search found 9706 results on 389 pages for 'boot ini'.

Page 47/389 | < Previous Page | 43 44 45 46 47 48 49 50 51 52 53 54  | Next Page >

  • Computer does not boot, often

    - by tam
    I've ran into a issue with my computer that it does no longer reach POST, but simply powers on for a fraction of a second and powers off. But this is not always, some times it boots just normally and it works as it should, no issues with not enough power or anything. But as soon as I turn it of, I can not turn it back on, but then again at some random point it just powers up again, and resumes normal operation. If I disconnect the 8pin ATX connector from the motherboard, it powers up, fans and disks spinning normally until I power it off again. So this problem only happens when ATX is connected, which seems odd, I normally always saw this kind of an error if ATX was not connected, but here it's the exact opposite. It also does not emit any sound on the buzzer, except the normal beep, when it powers up normally. I have already tried: Remove graphics card Remove one and/or all RAM sticks Disconnect everything non-essential, even hard drives Clear CMOS I have not yet tried to remove all components and tried to boot everything outside of the case, because I did not have the time to disassemble and bleed the water loop. However, I can confirm that nothing is stuck underneath the motherboard, not is any of those brass raisers touching the board where it should not. Specs: Gigabyte GA-970A-UD3 AMD FX6300 ATI HD7850 I think this should be enough for this issue.

    Read the article

  • Dual Boot Installing Ubuntu 12.04 with Windows 7 (64) on a non UEFI system fails

    - by Randnum
    I cannot seem to install the correct boot loader for a non-UEFI firmware system. I'm trying to install Ubuntu 12.04 and Windows 7 (64) which are technically compatible with GPT but for windows only if the firmware is UEFI enabled. My system uses the old BIOS system and does not support UEFI. Therefore, whenever I finish my Ubuntu install and try to install Windows I get a "cannot install to GPT partition type" error. Even if I use Gparted to format a special NTFS file format for windows it can't handle the GPT partition style because it doesn't have UEFI. But my ubuntu install always forces GPT during installation and never asks if I want to install the old BIOS style MBR instead. How do I resolve this? Both OS's will install fine on their own the problem is when I try to install the second OS it doesn't recognize any of the other's partitions and tries to rewrite it's own on top of the other. I've tried both OS's first and always run into the same problem. Since there is no way to make Windows recognize GPT without upgrading my Motherboard how do I tell Ubuntu to use the old BIOS MBR on install? Do I have to download a special Ubuntu with a specific grub version? or should I manaually configure my partition somehow to force it not to use GPT? Thank you,

    Read the article

  • Computer not finding hard drives on boot -sometimes-

    - by todd.pund
    Computer specs: Mobo: Gigabyte ultradurable 3 - GA-970A-UD3 Processor: First gen I7 3.2GHZ Ram: 8GB Kingston DDR3 1066 Video Card: EVGA NVidia GTX 460 1GB Hard Drive: 500MB 7200rpm x2 (can't remember brand, sorry I'm at work.) Last week my developer preview for Windows 8 ran out so I put my copy of windows 7 back on the computer. The computer at that point started suffering from frequent freezing and crashing. When I rebooted the computer sometimes it wouldn't find the system HD at all. When I looked at the post screen it seemed to show that it wasn't finding either of the HDs. Then yesterday when turning on the computer I just got GRUB as a message (not a GRUB prompt, just GRUB) I haven't had a dual boot of Linux for at least a year. I loaded windows 7 recovery console from the disk and ran: bootrec /fixboot bootrec /fixmbr Which did not help. At that point I just installed Ubuntu 13.04 over the windows 7 install and still received the GRUB post. I went into the BIOS and switched the Hard Drive priorities and then it loaded into Ubuntu fine. For several days everything was just hunky dory until I installed the Ubuntu version of Steam, install Portal and tried to run it. At that point the computer froze and after hard rebooting couldn't find the hard disks again. Then after restarting the system it loaded up fine again and no issues since. (I have not tried to launch portal again). My next thought is to remove the system hard drive and try to use the secondary as the master to see if the primary HD is bad. I'm sorry if this has been confusing, I'll answer any questions I can. Any thoughts?

    Read the article

  • Computer Won't Boot Properly, unless in safe mode?

    - by Mr_CryptoPrime
    I bought a computer today and booted it up, but when I did I only got a blank screen. I checked to make sure it wasn't the monitor by connecting it to my old computer...it worked. I then tried connecting my monitor to both DVI ports and found that the bottom one did work. However, now it just boots up and says "loading windows" and then when the login screen is suppose to come up the screen just goes blank and monitor says "no input, check cord" (or something like that). I tried reinstalling windows and then I was able to log on normally. I used the CD's and reinstalled all the drivers, then rebooted...now I am stuck right back where I started. I tried taking out the RAM and inserting into different slots, that didn't fix anything. I was able to boot up into windows using safe-mode. I suspected that my ATI Radeon 6950 was the issue and downloaded the drivers, but I can't install them on safe-mode. Someone said to install C++ distr. and I tried doing that to fix driver installation problem of "failed to load detection driver" but it wouldn't let me do that either. Please someone help me, I don't want to have to deal with the evil redtape of sending it back to get a replacement! My computer: -Content--text-_-"http://www.newegg.com/Product/Product.aspx?Item=N82E16883229236&nm_mc=TEMC-RMA-Approvel&cm_mmc=TEMC-RMA-Approvel--Content--text-_- Driver detection problem: http://www.hardwareheaven.com/hardwareheaven-tools-discussion/174912-failed-load-detection-driver-installation-error.html Driver download page: http://sites.amd.com/us/game/downloads/Pages/radeon_win7-64.aspx#1 I am using windows 7. Thanks again.

    Read the article

  • Install Debian stable linux ISO from USB to dual boot Windows

    - by tgkprog
    I want debian as dual boot with my windows vista, Free'd up 50GB in my d drive. Plan to use 40 for debian install, 6GB for swap space Have a 16GB USB drive Downloaded http://unetbootin.sourceforge.net/ Downloaded DVD files of stable debian-7.0.0-amd64-DVD-1.iso ( debian-7.0.0-amd64-DVD-2.iso and 3) After I choose HD install, unetbootin says place the ISO in the same place. but I have 3. do i need to merge them? if so any freeware to do that? can i do it with 7zip? when I extract with 7 zip there are classes between the 3 ISO files. Just over write? Options to merge (format etc for 7zip) ? Or I must use I tried to keep the 3 files with the other unetbootin files but get an error msg Files I have on my USB 06/30/2013 11:44 PM 2,835,648 ubnkern 06/05/2013 12:14 AM 3,998,007,296 debian-7.0.0-amd64-DVD-1.iso 06/04/2013 03:30 PM 4,696,872,960 debian-7.0.0-amd64-DVD-2.iso 06/05/2013 01:25 AM 4,698,955,776 debian-7.0.0-amd64-DVD-3.iso 06/30/2013 11:45 PM 6,530,278 ubninit 06/30/2013 11:46 PM 155 syslinux.cfg 06/30/2013 11:46 PM 60,928 menu.c32 also i can only copy above files if i format my USB as NTFS On FAT32 says too large to copy .iso How do I get around that? My internet needs a login so cannot do net install

    Read the article

  • What is the proper way to Windows 7/Ubuntu 10.10 Dual-Triple Boot Partitioning for Laptop OEM?

    - by Denja
    Hi Linux Community, I find my self struggling with the slowness of windows OS once again. It's Time to change with the Ubuntu 10.10 64bit for I like to use a faster Operating System. My Hard Disk laptop has a RECOVERY and HP_TOOLS partition they are both Primary. I Have the System Recovery DVD for Windows 64bit should anything bad happen. Here's the layout I used with windows before: * (C:) Windows 7 system partition NTFS - 284,89GB (Primary,ad Boot,Pagefile,Dump) * HP_TOOLS system partition FAT32 - 99MB (Primary) * (D:) RECOVERY partition NTFS - 12,90GB (Primary) * SYSTEM partition NTFS 199MB (Primary) Here's the layout I wanted to make: * (C:) Windows 7 system partition NTFS - 60GB (Primary) (sda1) * (D:) Windows DATA partition (user files) NTFS - 120GB(Primary)(sda2);wanna share with Linux * Linux root Ext4 - 10GB (Extended)(sda3) (Ubuntu 10.10 64bit) * Linux home Ext3 - 90GB (Extended)(sda4) (Ubuntu 10.10 64bit) * Linux swap swap- RAM size, 3GB (sda5) * Linux root Ext3- 18GB (Extended) (sda6) (OpenSuse or Puppy or kubuntu) Here is my New Ubuntu 10.10 64bit layout in use now: * SYSTEM partition NTFS 199MB (Primary) (sda1) * (C:) Windows 7 system partition NTFS - 90GB (Primary) (sda2) * (D:) Windows 7 RECOVERY partition NTFS - 12,90GB (Primary) (sda3) * Linux system partition EXTENDED - 195,1GB (Logical) * Linux root Ext4- 10GB (Extended) (sda4) * Linux swap swap- RAMx2 size, 6,1GB (sda5) * Linux home Ext3- 179GB (Extended) (sda6) When I installed Ubuntu,I didn't know if I could wipe all previous partitions,because of the RECOVERY partition. So I just made the space for my extended partition with GParted by deleting the HP_TOOLS (Fat32). By doing this I managed somehow to install Ubuntu 64 with Success. And I also made the partitions for the swap or a third Linux OS as Jordan suggested. But I couldn't actually make the partitions for the shared NTFS.(no option!) Question 1: What is the proper way to Windows 7/Ubuntu 10.10 Dual-Triple Boot Partitioning for Laptop OEM?? Thank you in advance for your advises and suggestions and Happy New Year to All!!

    Read the article

  • How to start a s3ql script automatically on boot?

    - by ks78
    I've been experimenting with s3ql on Ubuntu 10.04, using it to mount Amazon S3 buckets. However, I'd really like it to mount them automatically. Does anyone know how to do that? I've been working on a script, which works when its run from from the commandline, but for some reason I can't get it to run automatically on boot. Does anyone have any ideas? Here's my script: #! /bin/sh # /etc/init.d/s3ql # ### BEGIN INIT INFO # Provides: s3ql # Required-Start: $remote_fs $syslog # Required-Stop: $remote_fs $syslog # Default-Start: 2 3 4 5 # Default-Stop: 0 1 6 # Short-Description: Start daemon at boot time # Description: Enable service provided by daemon. ### END INIT INFO case "$1" in start) # Redirect stdout and stderr into the system log DIR=$(mktemp -d) mkfifo "$DIR/LOG_FIFO" logger -t s3ql -p local0.info < "$DIR/LOG_FIFO" & exec > "$DIR/LOG_FIFO" exec 2>&1 rm -rf "$DIR" modprobe fuse fsck.s3ql --batch s3://mybucket exec mount.s3ql --allow-other s3://mybucket /mnt/s3fs ;; stop) umount.s3ql /mnt/s3fs ;; *) echo "Usage: /etc/init.d/s3ql{start|stop}" exit 1 ;; esac exit 0

    Read the article

  • What is the right way to Windows 7/Ubuntu 10.10 Dual-Triple Boot Partitioning for Laptop OEM?

    - by Denja
    Hi Linux Community, I find my self struggling with the ever slow and buggy windoze OS once again. It's Time to change with the Ubuntu 10.10 64bit as a really faster Operating System. My Hard Disk laptop as a RECOVERY and HP_TOOLS partition they are both Primary. I Have the System Recovery DVD for Windows 64bit should anything happen. Here's the layout I used with windows before: * (C:) Windows 7 system partition NTFS - 284,89GB (Primary,Boot,Pagefile,Dump) * HP_TOOLS system partition FAT32 - 99MB (Primary) * (D:) RECOVERY partition NTFS - 12,90GB (Primary) * SYSTEM partition NTFS 199MB (Primary) Here's the layout I want to make based on your answers * (C:) Windows 7 system partition NTFS - 60GB (Primary) (sda1) * (D:) Windows DATA partition (user files) NTFS - 120GB(Primary)(sda2);wanna share with Linux * Linux root Ext4 - 100GB (Primary)(sda3) (Ubuntu 10.10 64bit) * Linux swap swap- RAM size, 3GB (sda4) * Linux root Ext3- 15,9GB (Extended)(sda5) (OpenSuse or Puppy) Here is my New Ubuntu 10.10 64bit layout in use now: * SYSTEM partition NTFS 199MB (Primary) (sda1) **Partition 1 does not end on cylinder boundary.(?)** * (C:) Windows 7 system partition NTFS - 90GB (Primary) (sda2) * (D:) Windows 7 RECOVERY partition NTFS - 12,90GB (Primary) (sda3) * Linux system partition EXTENDED - 195GB (Logical) * Linux root Ext4- 10GB (Extended) (sda5) * Linux home Ext3- 185GB (Extended) (sda6) I didn't know if I could wipe all previous partitions when i installed Ubuntu because of the RECOVERY partition so I just made the space for my extended partition by deleting the HP_TOOLS (Fat32). By doing this I managed to make and successfully install Ubuntu 64 but I couldn't actually make the partition for the swap or a third Linux OS. Question 1: What is the right way to Windows 7/Ubuntu 10.10 Dual-Triple Boot Partitioning for Laptop OEM?? Thank you in advance for your advises and suggestions and Happy New Year to All!!

    Read the article

  • Ubuntu 12.04 server froze during the first boot after it was installed.

    - by user69021
    I installed Ubuntu server 12.04 to my new server and it failed on the first boot. It just stopped and I can't proceed any further. Server's specifications: Dell PowerEdge T620 CPU : Xeon E5-2665 2.4G x 2 RAM : 8GB RDIMM, 1333MHz x 12 HDD : 3TB Near Line SAS 7.2K x 8 RAID controller : PERC H710 GPU : NVIDIA Tesla C2075 x 4 I have a screenshot of the screen it stopped on but I cannot attach it because my privilege level is currently too low. ![freeze on boot][1] Here are the last messages while booting. [5.048743] Freeing unused kernel memory : 920k freed [5.049046] Write protecting the kernel read-only data : 12288k [5.052973] Freeing unused kernel memory : 1608k freed [5.056132] Freeing unused kernel memory : 1196k freed Loading, please wait... [5.070236] udevd[218]: starting version 175 Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. [5.089030] megasas: 00.00.06.12-rc1 Wed. Oct. 5 17:00:00 PDT 2011 [5.089518] megasas: 0x1000:0x005b:0x1028:0x1f35: bus 1:slot 0:func 0 [5.089739] megaraid_sas 0000:01:00.0: PCI INT A -> GSI 34 (level, low) -> IRQ 34 [5.089937] megasas: FW now in Ready state [5.090427] dca service started, version 1.12.1 [5.091463] Intel(R) Gigabit Ethernet Network Driver - version 3.2.10-k [5.091578] Copyright (c) 2007-2011 Intel Corporation. [5.091712] igb 0000:06:00.0: PCI INT A -> GSI 16 (level,low) -> IRQ 16 [5.111090] megasas:IOC Init cmd success [5.123124] usb 1-1:new high-speed USB device number 2 using ehci_hcd What can I do about this?

    Read the article

  • Can I have a computer with 2 physical HDs, & Dual boot option, one for Windows & one for Ubuntu

    - by Frank
    When my HD failed in my old computer with a dual core, I immediately went out and bought a new 6 core PC because I needed it for business and had to have an immediate solution. The old computer was otherwise a good computer. I don't want to spend a $100+ for a new operating system for the old computer because the Windows 7 Professional opperating system for the new computer will only allow one install. So, I decided to look and see if there were any free operating systems and found Ubuntu. I downloaded it and burned a live CD and would like to try it on the old computer. I found a 200 GB HD I can buy for $30 and the seller will format it any way I want. There are also other HDs available at a similar price. What I was thinking I would like to do is buy 2 HDs. Then I can have one formatted for Ubuntu 12.04 and install Windows XP Pro SP1 on the other HD for which I have the original installation CD. Then I would like to have a dual boot option so that when I power up the computer, I can choose whether to use Windows XP or Ubuntu. Is this possible? If so, how would I do it, that is, arrange it so a dual boot option presents itself on power up.

    Read the article

  • How to install Windows 8 boot manager in a different partition?

    - by arnab321
    the last time i installed Windows 7, the boot manager automatically got installed in a small hidden partition, and the main os into another partition. So, formatting the c: won't affect the boot manager. yesterday i wiped and repartitioned my hdd like this: 50mb primary ntfs (meant for boot manager) 100gb primary ntfs (for win 8) 50gb primary ntfs (for win 7) some logical partitions to install ubuntu and other os i installed win 7 and then win 8, and now there is no os choosing menu. system directly boots win 8 and the 50 mb partition is empty. There is a way to boot Windows 7 and even Ubuntu directly from the Windows boot manager with EasyBCD. But How do i put the boot manager in the 50mb partition ?

    Read the article

  • How do I set Windows 7 as default OS but retain Windows 8 Boot screen?

    - by PJC
    I am dual-booting between Windows 7 and Windows 8 on a test workstation, and typically reboot 3-4 times per day. If I set Windows 8 as the default OS, I get the Windows 8 graphical boot screen, which is easy to 'see' during the boot process, but if I set Windows 7 as the default OS, I only get the Windows 7 text-mode boot screen. While I mostly want Windows 7 (at the moment), on the occasions I restart to get to Windows 8, I often 'miss' seeing the text-only boot and have to restart twice. Is it possible to (and if so, how do I) configure this such that Windows 7 is the default OS, but still having the Windows 8 boot screen appear? Edit: Just so you guys know, I've tried setting Windows 7 as the default both from the Windows 8 Boot screen itself, and from within Windows 8 -- neither of these have the desired effect.

    Read the article

  • How do I escape a new line character in a .ini file so that Zend_Config_Ini reads it literally?

    - by Nick
    I am trying to store a multiple line e-mail in an ini file using PHP/Zend Framework. My string has new lines characters in it, and when I use Zend_Config_Ini to parse the ini file, the new line characters come back escaped, so they are printed out on screen, instead of a line feed. Example: // ini file message = Hi {0},\n\nThis is a test message.\nGoodbye! is parsed by Zend_Config_Ini as: Hi {0},\\n\\nThis is a test message.\\nGoodbye! which then is printed out in the email as: Hi John,\n\nThis is a test message.\nGoodbye! Instead I want the e-mail to look like this: Hi John, This is a test message. Goodbye! Does anybody know how to achieve this? Thanks!

    Read the article

  • How to change the language of driver interface for Canon Pixma printers?

    - by Sammy
    Is there a way to change the language of the driver interface for Canon Pixma printers? Which language is used seems to be determined by the language of the OS or the Windows localization settings. I really don't want that, I want to be able to set the language manually to my own liking, either during the driver installation or afterwards. I have found a workaround for Pixma IP2770 where you edit the setup.ini file by replacing the language names and the DLL search paths with <SELECT> under the LANGUAGES section. So instead of... 0000=<SELECT> 0001=Arabic,RES\STRING\IJInstAR.ini,RES\DLL\IJInstAR.dll 0804=Simplified Chinese,RES\STRING\IJInstCN.ini,RES\DLL\IJInstCN.dll 0404=Traditional Chinese,RES\STRING\IJInstTW.ini,RES\DLL\IJInstTW.dll 0005=Czech,RES\STRING\IJInstCZ.ini,RES\DLL\IJInstCZ.dll 0006=Danish,RES\STRING\IJInstDK.ini,RES\DLL\IJInstDK.dll 0007=German,RES\STRING\IJInstDE.ini,RES\DLL\IJInstDE.dll 0008=Greek,RES\STRING\IJInstGR.ini,RES\DLL\IJInstGR.dll 0009=English,RES\STRING\IJInstUS.ini,RES\DLL\IJInstUS.dll 000A=Spanish,RES\STRING\IJInstES.ini,RES\DLL\IJInstES.dll 000B=Finnish,RES\STRING\IJInstFI.ini,RES\DLL\IJInstFI.dll 000C=French,RES\STRING\IJInstFR.ini,RES\DLL\IJInstFR.dll 000E=Hungarian,RES\STRING\IJInstHU.ini,RES\DLL\IJInstHU.dll 0010=Italian,RES\STRING\IJInstIT.ini,RES\DLL\IJInstIT.dll 0011=Japanese,RES\STRING\IJInstJP.ini,RES\DLL\IJInstJP.dll 0012=Korean,RES\STRING\IJInstKR.ini,RES\DLL\IJInstKR.dll 0013=Dutch,RES\STRING\IJInstNL.ini,RES\DLL\IJInstNL.dll 0014=Norwegian,RES\STRING\IJInstNO.ini,RES\DLL\IJInstNO.dll 0015=Polish,RES\STRING\IJInstPL.ini,RES\DLL\IJInstPL.dll 0016=Portuguese,RES\STRING\IJInstPT.ini,RES\DLL\IJInstPT.dll 0019=Russian,RES\STRING\IJInstRU.ini,RES\DLL\IJInstRU.dll 001D=Swedish,RES\STRING\IJInstSE.ini,RES\DLL\IJInstSE.dll 001E=Thai,RES\STRING\IJInstTH.ini,RES\DLL\IJInstTH.dll 001F=Turkish,RES\STRING\IJInstTR.ini,RES\DLL\IJInstTR.dll 0021=Indonesian,RES\STRING\IJInstID.ini,RES\DLL\IJInstID.dll You get.... 0000=<SELECT> 0001=<SELECT> 0804=<SELECT> 0404=<SELECT> 0005=<SELECT> 0006=<SELECT> 0007=<SELECT> 0008=<SELECT> 0009=English,RES\STRING\IJInstUS.ini,RES\DLL\IJInstUS.dll 000A=<SELECT> 000B=<SELECT> 000C=<SELECT> 000E=<SELECT> 0010=<SELECT> 0011=<SELECT> 0012=<SELECT> 0013=<SELECT> 0014=<SELECT> 0015=<SELECT> 0016=<SELECT> 0019=<SELECT> 001D=<SELECT> 001E=<SELECT> 001F=<SELECT> 0021=<SELECT> .... in case English is the preferred language. It's a way to force the installation program to only install the English language support. IP2770 is a model for the Asian market, so if you want to check this out you need to go to the Canon India download page (for instance) to get the driver. Unfortunately this method is not possible with my IP4000. There is no driver even available for it to download for Windows Vista. But is there really no way of changing the language of the UI in any normal way, you know... without having to hack it? Besides, the driver for my printer comes with Windows Vista, so I don't even have to install any drivers. And little do I get the chance to set the language, knowing that the installation never happens. Any ideas?...

    Read the article

  • Having trouble with a workaround, for booting from a usb stick, using grub and a minimal linux kernel to load usb drivers

    - by s hanley
    I'm trying to boot from a usb stick. I formatted it to fat32, and later to ext2, and installed dsl on it using unetbootin, and later the usb install guide on dsl wiki (http://www.damnsmalllinux.org/wiki/index.php/Install_to_USB_From_within_Linux). The bios doesn't have a setting for booting from usb. Grub doesn't "see" the usb drive when I use the root and find commands, explained in (http://www.damnsmalllinux.org/wiki/index.php/USB_Booting). This happens even when I set boot from floppy at the top of the boot order. However, my usb keyboard is recognised by the bios and by grub. How can it recognise the keyboard but not the usb drive? Also, the usb led does flash even before grub starts up, so surely something must be happening usb-wise? I am now following an ubuntu guide to booting from a USB stick, using a hdd-based, minimal linux kernel to supply the usb drivers. But I'm having difficulty adapting it to other OSes (slax/dsl/aptosid). I believe I have to alter the initrd.gz file to include usb drivers and then copy that file along with vmlinuz to a partition on my hdd. But, what's the grub command for the kernel line supposed to look like? From the ubuntu example it's: title USB FLASH DRIVE root (hd0,6) kernel /boot/usb-boot/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper noprompt cdrom-detect/try-usb=true persistent initrd /boot/usb-boot/initrd.lz boot Should mine just be: title USB FLASH DRIVE root (hd0,6) kernel /boot/usb-boot/vmlinuz cdrom-detect/try-usb=true initrd /boot/usb-boot/initrd.lz boot

    Read the article

  • What's the best way to re-install Ubuntu on my triple-boot system?

    - by TheX
    I have a triple boot system with Windows, Ubuntu 10.10 and 11.04, installed in that order, plus a "Data" Partition that has all my data, what I want to do is remove the 11.04, because I haven't booted into it for over a month, and I am afraid if I try to do any updates it will bork the system... I would like to install a fresh copy of 11.04 and leave the rest of the system intact, what is the best way to do this?

    Read the article

  • Ask How-To Geek: Fixing the Windows Boot Record, Sharing Mac Folders with Windows, and Reviving the Outlook Reminder Bell

    - by Jason Fitzpatrick
    You’ve got questions and we’ve got answers. Today we look at how to boot into Windows after uninstalling Linux, sharing folders between a Mac and a Windows computer, and how to reinstate the missing Outlook reminder bell. Once a week we dip into our mailbag and help readers solve their problems, sharing the useful solutions with you I the process. Read on to see our fixes for this week’s reader dilemmas.How To Make a Youtube Video Into an Animated GIFHTG Explains: What Are Character Encodings and How Do They Differ?How To Make Disposable Sleeves for Your In-Ear Monitors

    Read the article

  • Setting php values in php-fpm confs instead of php.ini

    - by zsero
    I'd like to set values in php-fpm conf files what are normally set in php.ini. I'm using nginx. I've created the following setting, but I'm not sure if this would work. php_value[memory_limit] = 96M php_value[max_execution_time] = 120 php_value[max_input_time] = 300 php_value[php_post_max_size] = 25M php_value[upload_max_filesize] = 25M Do you think if this is OK like this? What happens when a value is both set in php.ini and in php-fpm conf files? The php-fpm overrides the ini one? Finally, isn't it a problem that this way I can set different values for all virtual hosts? I mean php.ini seems like a global setting, while this is host dependent. Can different hosts run with different memory-limits, etc?

    Read the article

  • Disable XP disk check using FAT32

    - by mike xie
    Right now I'm using Windows XP and Macintosh on my MacBook Pro via Bootcamp. Sometimes my XP would crash and when I restarted it it would have to go through disk check, although it says I can skip it by pushing a key, but this never worked for me. I did a bit of research online on how to disable disk check and found chkntfs /x c: but when I tried this out in my cmd it said the disk is FAT32 format. I tried to convert my C: drive from FAT32 to NTFS by using convert c: /FS:NTFS but when I tried this it told me to locate my C: drive. I tried to type C: and Bootcamp but couldn't really get past it. I later saw someone said to use this: Windows Registry Editor Version 5.00 [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager] "AutoChkTimeOut"=dword:0000000 [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager] "BootExecute"=hex(7):61,00,75,00,74,00,6f,00,63,00,68,00,65,00,63,00,6b,00,20,\ 00,61,00,75,00,74,00,6f,00,63,00,68,00,6b,00,20,00,2a,00,00,00,00,00 [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon] "SFCScan"=dword:00000000 [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\MyComputer\cleanuppath] @=hex(2):25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,00,74,00,25,\ 00,5c,00,73,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,63,00,6c,00,\ 65,00,61,00,6e,00,6d,00,67,00,72,00,2e,00,65,00,78,00,65,00,20,00,2f,00,44,\ 00,20,00,25,00,63,00,00,00 (Save it as .reg and execute it) I have just tried running it but am not really sure if it did anything (my laptop hasn't crashed yet :) ) Firstly, I am wondering if someone can tell me how to check if that script worked? Secondly, if that script didn't work, does anyone have any solution for these problems? Is there another way to disable disk check or is there another way for me to change my FAT32 to NTFS?

    Read the article

  • MacBook Pro (OSX Lion) - shutdown automatically before reaching login screen

    - by mkk
    When I try to lunch my MacBook Pro I can see a progress bar on loading screen. It goes to 1/15 or something like this and then it shut downs - I cannot reach even login screen. It happened to me 2 months ago, I have 'fixed' this by formatting my hard drive and installing OSX (Lion) again. This time I think that situation is a little bit different - I am able to enter single-user mode by pressing cmd + s. I then type /sbin/fsck -yf, I get the error: ** Checking Journaled HFS Plus volume. The volume name is Macintosh HD ** Checking extents overflow file. ** Checking catalog file. Invalid node structure (4, 24704) ** The volume Macintosh HD could not be verified completely. /dev/rdisk0s2 (hfs) EXITED WITH SIGNAL 8 but when I type exit, I can the login screen and I can log in. I tried a lot of things, booting from recovery partition and choosing disk utility to repair the disc, but I get error that it cannot be repaired. I have googled for hours and the only real solution I have found was to buy Disc warrior that might fix the issue. Any other suggestions? Secondary question is what causes this issue? I thought the reason are bad sectors, but Smart Utility haven't found any. I found suggestion that RAM could cause this kind of issue as well, so I downloaded rember and made memory test - all tests passed. Right now I have used my solution of entering single-mode user and then typing exit, however I am not sure how long it will 'work'. Of course I have back-uped what I considered important. Thanks for the help in advance! UPDATE: I guess Smart Utility was not very useful, I mnaged to get input/output error, which I believe is equivalent to bad sector.

    Read the article

  • Windows 8 installer: Something Happened

    - by mcandre
    My school provides Windows 8 through MSDN. When I run the Windows 8 installer, it says: What can I do? Specs: systeminfo | findstr /B /C:"OS Name" /C:"OS Version" OS Name: Microsoft Windows 7 Professional OS Version: 6.1.7601 Service Pack 1 Build 7601 systeminfo | findstr /B /C:"System Manufacturer" /C:"System Model" System Manufacturer: Apple Inc. System Model: MacBookPro5,5 Also posted in Microsoft Community.

    Read the article

  • Make a bootable USB drive that can install both Windows XP and Ubuntu

    - by Utkarsh
    I have ISO images for both Ubuntu and Windows XP. I want to host both of them on a USB drive so that I can install either without needing installation CDs (I don't have a CD drive). How can I do that? SO, I want to have both Windows XP and Ubuntu on my USB Drive so that i could install any one of tem just from a USB. I do not have CD Drive thats why i wanna do that. I have ISO image of both ubuntu and windows xp

    Read the article

< Previous Page | 43 44 45 46 47 48 49 50 51 52 53 54  | Next Page >